共查询到20条相似文献，搜索用时 15 毫秒
1.
波形钢腹板混凝土箱拱地震响应分析 总被引：1，自引：0，他引：1
采用时程分析法,对三向地震动作用下的波形钢腹板混凝土箱拱新型结构的地震特性进行分析,通过与混凝土腹板的混凝土箱拱动力特性和地震响应特点的对比,得出该新型拱圈结构具有较优越的抗震性能。同时,把三向地震作用的结果与在两个主方向(纵桥向和横桥向)同时施加地震动的计算结果进行比较,得到竖向地震动对波形板箱拱地震响应的影响程度。 相似文献
2.
为了揭示近断层地震作用下上承式钢筋混凝土拱桥的动力响应特点,以西南山区某上承式拱桥为背景,用OpenSEES平台建立了全桥非线性动力分析模型,探讨了近断层地震动的输入方式、脉冲效应和竖向地震动等三个关键因素对桥梁动力响应的影响规律。研究结果表明:地震输入方式对拱圈地震响应的影响较小,但对拱上立柱地震响应的影响很大,尤其是拱顶附近的短立柱,在抗震分析中,建议偏安全地采用三向地震输入方式;脉冲效应对拱桥地震响应的影响非常大,会导致拱圈、拱上立柱和桥面板地震响应大幅增加,桥面板残余平面转角甚至增大6倍以上;竖向地震动对拱圈轴力和面内弯矩、拱上立柱纵向弯矩和剪力的影响很大,拱顶处的面内弯矩放大倍数最大可达2.95,总体来说,采用规范所建议的方法考虑竖向地震是偏保守的。 相似文献
3.
The probability that an earthquake occurs when a train is running over a bridge in earthquake‐prone regions is much higher than before, for high‐speed railway lines are rapidly developed to connect major cities worldwide. This paper presents a finite element method‐based framework for dynamic analysis of coupled bridge–train systems under non‐uniform seismic ground motion, in which rail–wheel interactions and possible separations between wheels and rails are taken into consideration. The governing equations of motion of the coupled bridge–train system are established in an absolute coordinate system. Without considering the decomposition of seismic responses into pseudo‐static and inertia‐dynamic components, the equations of motion of the coupled system are formed in terms of displacement seismic ground motions. The mode superposition method is applied to the bridge structure to make the problem manageable while the Newmark‐β method with an iterative computation scheme is used to find the best solution for the problem concerned. Eight high‐speed trains running over a multi‐span steel truss‐arch bridge subject to earthquakes are taken as a case study. The results from the case study demonstrate that the spatial variation of seismic ground motion affects dynamic responses of the bridge–train system. The ignorance of pseudo‐static component when using acceleration seismic ground motions as input may underestimate seismic responses of the bridge–train system. The probability of separation between wheels and rails becomes higher with increasing train speed. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
4.
5跨连续中承式钢管混凝土拱桥抗震性能分析 总被引：12，自引：0，他引：12
钢管混凝土拱桥由于桥型优美在城市桥梁中得到广泛应用,对某正在设计的5跨连续巾承式钢管混凝土拱桥进行了动力特性和抗震性能分析,根据该桥的结构特点,建立了’该桥的空间有限元分析模型,计算桥梁的自振特性,基于反应谱方法计算了该桥在横向、纵向水平地震反应,计算结果表明：该桥拱肋的面外刚度相对较小,在桥梁振动中首先出现拱肋的面外振动;桥梁的竖向振动表现为拱肋与桥面的整体竖向振动,其基频明显比拱肋面外振动大;主拱肋的轴力由横桥向地震动控制,其他内力由纵桥向地震动控制;地震作用对弯矩的影响较大,故主拱的内力计算应考虑地震力的影响;在设计计算中除常规关键点应作为控制点外,内外拱连接处也应作为控制点。计算结果已为该桥的抗震设计提供了参考。 相似文献
5.
多维地震激励作用下大跨度钢管混凝土提篮拱桥的随机响应 总被引：8，自引：4，他引：4
以某大跨度钢管混凝土提篮拱桥为例,分别研究了大跨度钢管混凝土提篮拱桥的自振特性及其在纵向激励、纵 竖向激励、纵 横向激励、纵 竖 横向激励作用下的地震响应特性。结果表明,横向激励对提篮拱桥地震响应特性有较大影响,对于多维激励情况,提篮拱桥的抗震性能并不优于平行拱,并进一步分析了原因。 相似文献
6.
Nefize Shaban Alp Caner Ahmet Yakut Aysegul Askan Ali Karimzadeh Naghshineh Arman Domanic Gizem Can 《地震工程与结构动力学》2015,44(6):889-905
Presence of vehicles on a bridge has been observed many times during past earthquakes. Although in practice, the engineers may or may not include the live load contribution to seismic weight in design, current bridge design codes do not specify a certain guideline. A very limited research has been conducted to address this issue from design point of view. The focus of this research is to experimentally assess the effect of a vehicle on the seismic response of a bridge through a large‐scale model. In this scope, a 12‐meter long bridge, having a one lane deck with concrete slab on steel girders, has been shaken under five different ground motions obtained from recent earthquakes that occurred in Turkey, in its transverse direction, both with and without a vehicle on top of the deck. The measured results have indicated that top slab transverse acceleration and bearing displacements can reduce up to 18.7% in presence of a vehicle during seismic tests, which is an indication of reduction in substructure forces. The main reason for the reduction in seismic response of the bridge in the presence of live load can be ascribed to the increase in damping of the system due to mass damper‐like action induced by the vehicle. This beneficial effect cannot be observed in vertical seismic response. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
7.
This paper presents the first of a series of case studies on the seismic design of long span bridges （cable-stayed bridges, suspension bridges and arch bridges） under a cooperative research project on seismic behavior and design of highway bridges between the State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University and the Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo. The objective of this series of case studies is to examine the differences and similarities on the seismic design practice of long span bridges in China and the U.S., to identify research needs and to develop design guidelines beneficial to bridge engineers in both countries. Unlike short to medium span bridges, long span bridges are not included in most seismic design specifications, mainly because they are location dependent and structurally unique. In this paper, an available model of a steel tied half through arch bridge with a main span of 550m in China is discussed. Analysis is focused on comparisons of the seismic responses due to different ground motions. Seismic design criteria and seismic performance requirements for long span bridges in both countries were first introduced and compared, and then three near field earthquake records with large vertical components were selected as the excitations to examine the seismic behavior and seismic vulnerability of the bridge. Results show that （1） the selected near field ground motions cause larger responses to key components （critical sections） of the bridge （such as arch rib ends） with a maximum increase of more than twice those caused by the site specific ground motions; （2） piers, longitudinal girders and arch crowns are more vulnerable to vertical motions, especially their axial forces; and （3） large vertical components of near field ground motions may not significantly affect the bridge＇s internal forces provided that their peak acceleration spectra ordinates only appear at periods of less than 0.2s. However, they may have more influence on the longitudinal displacements of sliding bearings due to their large displacement spectra ordinates at the fundamental period of the bridge. 相似文献
8.
Shear keys are used in the bridge abutments and piers to provide transverse restraints for bridge superstructures. Owing to the relatively small dimensions compared to the main bridge components (girders, piers, abutments, piles), shear keys are normally regarded as secondary component of a bridge structure, and their influences on bridge seismic responses are normally neglected. In reality, shear keys are designed to restrain the lateral displacements of bridge girders, which will affect the transverse response of the bridge deck, thus influence the overall structural responses. To study the influences of shear keys on bridge responses to seismic ground excitations, this paper performs numerical simulations of the seismic responses of a two-span simply-supported bridge model without or with shear keys in the abutments and the central pier. A detailed 3D finite element (FE) model is developed by using the explicit FE code LS-DYNA. The bridge components including bridge girders, piers, abutments, bearings, shear keys and reinforcement bars are included in the model. The non-linear material behaviour including the strain rate effects of concrete and steel rebar are considered. The seismic responses of bridge structures without and with shear keys subjected to bi-axial spatially varying horizontal ground motions are calculated and compared. The failure mode and damage mechanism of shear keys are discussed in detail. Numerical results show that shear keys restrain transverse movements of bridge decks, which influence the torsional–lateral responses of the decks under bi-axial spatially varying ground excitations; neglecting shear keys in bridge response analysis may lead to inaccurate predictions of seismic responses of bridge structures. 相似文献
9.
The performance‐based philosophy has been accepted as a more reasonable design concept for engineering structures. For this purpose, capacity evaluation and demand prediction procedures for civil engineering structures under earthquake excitations are of great significance. This work presents a displacement‐based seismic performance verification procedure including capacity and seismic demand predictions for steel arch bridges and investigates its applicability. Pushover analyses is employed as a basis in this method to investigate the structure's behaviors. A failure criterion for steel members accounting for the effect of local buckling is involved and an equivalent single‐degree‐of‐freedom (ESDOF) system with a simplified bilinear hysteretic model formulated using pushover analyses results is introduced to estimate the displacement capacity and maximum demand of steel arch bridges under major earthquakes. To check the accuracy of the proposed method, seismic capacities and demands from multi‐degree‐of‐freedom (MDOF) time‐history analyses with Level‐II design earthquake record inputs modeling major earthquakes are used as benchmarks for comparison. By a case study, it is clarified that the proposed prediction procedure can give accurate estimations of displacement capacities and demands of the steel arch bridge in the transverse direction, while insufficient for the longitudinal direction, which confirms the conclusion drawn in other structure types about the applicability of pushover analyses. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
10.
Effects of seismic isolation on the seismic response of a California high‐speed rail prototype bridge with soil‐structure and track‐structure interactions 
下载免费PDF全文
下载免费PDF全文 With the launch of the high‐speed train project in California, the seismic risk is a crucial concern to the stakeholders. To investigate the seismic behavior of future California High‐Speed Rail (CHSR) bridge structures, a 3D nonlinear finite‐element model of a CHSR prototype bridge is developed. Soil‐structure and track‐structure interactions are accounted for in this comprehensive numerical model used to simulate the seismic response of the bridge and track system. This paper focuses on examining potential benefits and possible drawbacks of the a priori promising application of seismic isolation in CHSR bridges. Nonlinear time history analyses are performed for this prototype bridge subjected to two bidirectional horizontal historical earthquake ground motions each scaled to two different seismic hazard levels. The effect of seismic isolation on the seismic performance of the bridge is investigated through a detailed comparison of the seismic response of the bridge with and without seismic isolation. It is found that seismic isolation significantly reduces the deck acceleration and the force demand in the bridge substructure (i.e., piers and foundations), especially for high‐intensity earthquakes. However, seismic isolation increases the deck displacement (relative to the pile cap) and the stresses in the rails. These findings imply that seismic isolation can be promisingly applied to CHSR bridges with due consideration of balancing its beneficial and detrimental effects through using appropriate isolators design. The optimum seismic isolator properties can be sought by solving a performance‐based optimum seismic design problem using the nonlinear finite‐element model presented herein. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
11.
四渡河大跨悬索桥空间地震响应分析 总被引：2，自引：0，他引：2
非一致激励输入对大跨结构响应有着较大影响。本文以四渡河悬索桥为背景,首先根据该桥动力特性对规范反应谱进行调整,基于修正反应谱并考虑相位非平稳性合成地震动位移;然后编制了调索程序来确定有限元模型的初始平衡构型;采用时程法,分别分析了在纵桥向、横桥向以及竖向的非一致激励(行波输入、多点输入)下的悬索桥地震响应。计算结果表明,纵向非一致激励输入增大了悬索桥的地震响应,横向、竖向非一致激励输入的影响有增有减。 相似文献
12.
基于OpenSees平台建立钢管混凝土拱桥动力分析模型,并与Midas Civil模型结果进行比对。通过一条强震记录下的IDA分析,得到钢管混凝土拱桥拱肋横桥向非线性地震性能,比较拱肋采用弹性梁单元和纤维梁单元两种模型的拱脚弯矩时程曲线和拱顶位移时程曲线,分析拱肋关键截面屈服机理,绘制它们的曲率IDA曲线和拱顶位移IDA曲线。研究结果表明:横桥向在强震作用下拱脚和拱顶不一定先屈服,而是在拱肋截面突变或有集中质量连接处,在设计时需重点考虑;随着地震动增大,先是与横撑连接处拱肋首先屈服,然后是拱脚和拱顶位置,最后向整个拱肋扩展,拱肋非线性性能良好,仍有一定的抗震储备能力。 相似文献
13.
本文以一座三跨总长60 m的整体桥为案例桥,分别试设计了同跨径的半整体桥、延伸桥面板桥和常规连续梁桥。通过Midas/Civil软件建立四种桥型的有限元模型,并对其进行了E1和E2反应谱分析和时程分析,对比了四种桥型的结构反应峰值（墩顶位移、桥墩及桩基剪力与弯矩、台底位移、桥台桩基剪力与弯矩）。计算结果表明:当桥梁存在15°的斜交角,整体桥、半整体桥在地震动沿平行于桥台长边方向及其垂直方向输入时更不利,而延伸桥面板桥和常规连续梁桥在地震动沿顺桥向和横桥向输入时更不利。四种桥型在地震作用下:整体桥抗震性能最优异,但其台底位移、桥台桩基的剪力和弯矩最大;半整体桥台底位移、桥台桩基的剪力和弯矩最小,其墩顶位移、桥墩及桩基的剪力和弯矩仅比整体桥大;延伸桥面板桥和常规连续梁桥的墩-梁相对位移远大于整体桥和半整体桥,不适用于地震基本烈度高的区域。 相似文献
14.
This paper investigates the behavior and the failure mechanism of a double deck bridge constructed in China through nonlinear time history analysis.A parametric study was conducted to evaluate the influence of different structural characteristics on the behavior of the double deck bridge under transverse seismic motions,and to detect the effect of bidirectional loading on the seismic response of this type of bridge.The results showed that some characteristics,such as the variable lateral stiffness,the foundation modelling,and the longitudinal reinforcement ratio of the upper and lower columns of the bridge pier bents have a major impact on the double deck bridge response and its failure mechanism under transverse seismic motions.It was found that the soft story failure mechanism is not unique to the double deck bridge and its occurrence is related to some conditions and structural characteristics of the bridge structure.The analysis also showed that the seismic vulnerability of the double deck bridge under bi-directional loading was severely increased compared to the bridge response under unidirectional transverse loading,and out-of-phase movements were triggered between adjacent girders. 相似文献
15.
Traveling wave effect on the seismic response of a steel arch bridge subjected to near fault ground motions 总被引：2，自引：0，他引：2
徐艳 《地震工程与工程振动(英文版)》2007,6(3):245-257
In the 1990s, several major earthquakes occurred throughout the world, with a common observation that near fault ground motion (NFGM) characteristics had a distinct impact on causing damage to civil engineering structures that could not be predicted by using far field ground motions. Since then, seismic responses of structures under NFGMs have been extensively examined, with most of the studies focusing on structures with relatively short fundamental periods, where the traveling wave effect does not need to be considered. However, for long span bridges, especially arch bridges, the traveling wave (only time delay considered) effect may be very distinct and is therefore important. In this paper, the results from a case study on the seismic response of a steel arch bridge under selected NFGMs is presented by considering the traveling wave effect with variable apparent velocities. The effects of fling step and long period pulses of NFGMs on the seismic responses of the arch bridge are also discussed. 相似文献
16.
This study is intended to investigate the seismic response of steel monorail bridges using three‐dimensional dynamic response analysis. We particularly consider monorail bridge–train interaction when subjected to ground motion that occurs with high probability. A monorail train car with two bogies with pneumatic tires for running, steering and stabilizing wheels is assumed to be represented sufficiently by a discrete rigid multi‐body system with 15 degrees of freedom (DOFs). Bridges are considered as an assemblage of beam elements with 6 DOFs at each node. Modal analysis is used for dynamic response analysis under moderate earthquakes. The seismic response of an advanced monorail bridge that adopts a simplified structural system and composite girders is investigated through comparison with seismic responses of a conventional bridge. The acceleration response of a monorail train is also calculated to investigate the effect of structural types of bridges on the train's dynamic response during earthquakes. Results show that the seismic responses of the advanced bridges are greater than those of the conventional monorail bridge because of the simplified structural system and increased girder weight that is attributable to composite girders of the advanced bridge. Moreover, the train on the advanced bridge shows greater dynamic response than that on the conventional bridge. Observations reveal that the dynamic monorail train system acts as a damper on the monorail bridge. That fact shows that the existing design, which considers a train as additional mass, yields a conservative result. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
17.
深水连续刚构桥地震响应分析 总被引：2，自引：0，他引：2
本文探讨连续刚构桥在深水中地震响应的特性.首先建立了地震作用下深水桥梁的运动方程,简要阐述了该运动方程的求解方法,应用该运动方程,对一座桥墩淹没水深168m的连续刚构桥进行了地震响应分析,考察了在纵向、横向激励作用下桥墩的内力响应和位移响应特征,探讨了矩形空心截面桥墩内域水、外域水对桥墩地震响应的影响,结果表明,由于墩-水相互作用,桥墩的位移和内力响应均有明显增大,对于矩形空心墩,内域水和外域水的影响应同时计入. 相似文献
18.
我国西部部分连续刚构桥临近地震断层建设,在抗震分析时通常会忽略断层走向与桥梁纵桥向夹角对其地震反应的影响。利用Midas Civil软件建立4座墩高不同的大跨度连续刚构桥模型,选取10组近断层强震记录进行时程分析,研究断层走向对刚构桥地震反应(位移和弯矩反应)的影响。结果显示：在水平双向近断层地震动输入下,桥梁主墩及主梁纵桥向地震反应在断层走向与纵桥向夹角为75°～135°范围内最大,而横桥向最大地震反应则发生在夹角为0°～30°或120°～180°范围;在三向近断层地震动输入下,与仅考虑水平双向地震动输入下的桥梁地震反应相比,竖向地震动对主梁竖向弯矩响应的影响较大,特别是主墩和主梁的交界处,增大比例可达2倍及以上。就文章选取的4座桥梁算例,不考虑断层走向和桥梁纵桥向的夹角则存在低估桥梁地震反应的可能,低估误差在15%～40%左右。 相似文献
19.
在近断层地震动下桥梁结构将发生较大反应,减隔震设计是减轻地震损伤的重要手段。提出了在桥梁双柱墩横桥向设置防屈曲支撑(BRB),在纵桥向设置铅芯橡胶支座(LRB)的双向减隔震体系。利用Midas Civil软件建立3种不同减隔震方式的桥梁结构模型:LRB仅单向,LRB双向与LRB联合BRB,运用非线性时程分析方法计算了桥墩反应(墩顶侧移角、残余位移角和曲率延性)、LRB支座变形和BRB的耗能特性等。结果表明:在近断层地震动输入下联合设置LRB和BRB的双向减隔震桥梁减震效果明显,相比其它2种方式,能有效降低墩柱的塑性变形及起到保护桥墩的作用。在横桥向,桥墩最大侧移角、残余位移角和最大曲率延性系数都显著降低。 相似文献
20.
基于多自由度空间结构体系地震响应分析的基本理论,利用ANSYS建立空间有限元模型,采用动力时程分析法分析某大跨度连续钢桁架柔性拱桥在一致和非一致激励作用不同地震工况下的空间地震响应。研究结果表明:非一致激励作用下,拱肋轴力、主桁弯矩峰值出现在拱脚和边墩附近;地震波组合输入较其单向输入拱脚轴力和面内弯矩最大分别可达1.28和8.32倍;非一致输入较一致激励作用拱脚轴力和面内弯矩分别可达2.5和8.4倍;地震波横向输入较纵向输入横向位移峰值比可达2.4倍,纵向输入较横向输入纵向位移峰值比可达2.6倍;结构的支座形式对结构构件地震响应结果也有一定影响;建议大跨度钢桁拱桥抗震设计应充分考虑地震波的空间和时间效应。 相似文献