共查询到20条相似文献，搜索用时 46 毫秒
1.
A three‐dimensional displacement approach for analysis of laterally loaded piles in nonhomogeneous soil 
下载免费PDF全文
下载免费PDF全文 Hiroyoshi Hirai 《国际地质力学数值与分析法杂志》2017,41(16):1605-1635
An analytical approach using the three‐dimensional displacement of a soil is investigated to provide analytical solutions of the horizontal response of a circular pile subjected to lateral loads in nonhomogeneous soil. The rocking stiffness coefficient of the pile shaft in homogeneous soil is derived from the analytical solution taking into account the three‐dimensional displacement represented in terms of scalar potentials in the elastic three‐dimensional analysis. The lateral stiffness coefficient of the pile shaft in nonhomogeneous soil is derived from the rocking stiffness coefficient taking into account the rocking rotation of a rigid pile shaft. The relationship between horizontal displacement, rotation, moment, and shear force of a pile subjected to horizontal loads in nonhomogeneous soil is obtainable in the form of the recurrence equation. The formulation of the lateral displacement and rotation of the pile base subjected to lateral loads in nonhomogeneous soils is presented by taking into account Mindlin's equation and the equivalent thickness for soil layers in the equivalent elastic method. There is little difference between lateral, rocking, and couple stiffness coefficients each obtained from both the two‐dimensional and three‐dimensional methods except for the case of Poisson's ratio near 0.5. The comparison of results calculated by the current method for a pile subjected to lateral loads in homogeneous and nonhomogeneous soils has shown good agreement with those obtained from analytical and numerical methods. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
2.
为探讨海上风机在风、浪等水平往复循环荷载下大直径单桩基础的循环弱化特性,设计了稳定输出长期循环荷载的机械加载装置,开展了软黏土中长期水平循环荷载下海上风电大直径单桩基础和传统长桩基础的模型试验对比研究。根据API给出的骨干曲线和Masing二倍准则构建循环荷载下的p-y（荷载-位移）曲线,并借鉴前人工作,采用累积塑性应变描述软黏土的不排水抗剪强度弱化,提出了分析大周数水平循环荷载下单桩基础循环弱化的理论方法。该方法将循环荷载次数、幅值等外界条件与桩周土体的循环弱化特性建立联系,以适应海洋环境复杂多变的水平循环荷载形式。通过模型试验和理论研究认为,大直径单桩基础因刚度较大,在同样的水平力循环荷载条件下,其抵抗循环荷载的能力明显优于传统长桩。在海上风机大直径单桩的设计中采用基于黏土残余强度的循环后稳定水平承载力更为合理。 相似文献
3.
Analysis of rectangular piles subjected to lateral loads in nonhomogeneous soil using a Winkler model approach 下载免费PDF全文
下载免费PDF全文 Hiroyoshi Hirai 《国际地质力学数值与分析法杂志》2015,39(9):937-968
An analytical approach using a Winkler model based on two lateral soil displacement components in a three‐dimensional soil is investigated to provide analytical solutions of horizontal response of a rectangular pile subjected to lateral loads in nonhomogeneous soil. The two lateral displacement components of a soil surrounding the rectangular pile are represented by the Fourier series of displacement potential functions in the elastic three‐dimensional analysis. The lateral stiffness coefficient of the rectangular pile shaft in nonhomogeneous soil is derived from the rocking stiffness coefficient taking into account rocking rotation of a rigid pile shaft. The relationship between horizontal displacement, rotation, moment, and shear force for the rectangular pile subjected to horizontal loads in nonhomogeneous soil is obtainable in the form of the recurrence equation. The formulation of lateral displacement and rotation for a rectangular pile subjected to lateral loads on the pile base in nonhomogeneous soil is proposed by taking into account Mindlin's equation and the equivalent thickness for soil layers in the equivalent elastic method. The difference of lateral behavior between square and circular piles subjected to lateral loads is insignificant. The effect of aspect ratio of the rectangular pile on the lateral behavior is great for the lower stiffness ratio between pile and soil and the larger length–equivalent diameter ratio. The effect of the value of Poisson's ratio of soil on lateral stiffness coefficient is relatively small except Poisson's ratio close to 0.5. The comparison of the results calculated by the current method for a rectangular pile subjected to lateral loads in nonhomogeneous soil has shown good agreement with those obtained from the analytical methods and the finite element method. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
4.
Analysis of piles subjected to lateral soil movements using a three‐dimensional displacement approach 下载免费PDF全文
下载免费PDF全文 Hiroyoshi Hirai 《国际地质力学数值与分析法杂志》2016,40(2):235-268
An analytical approach using the three‐dimensional displacement of a soil is investigated to provide analytical solutions of the horizontal response of a circular pile subjected to lateral soil movements in nonhomogeneous soil. The lateral stiffness coefficient of the pile shaft in nonhomogeneous soil is derived from the rocking stiffness coefficient that is obtained from the analytical solution, taking into account the three‐dimensional displacement represented in terms of scalar potentials in the elastic three‐dimensional analysis. The relationship between horizontal displacement, rotation, moment, and shear force of a pile subjected to lateral soil movements in nonhomogeneous soil is obtainable in the form of the recurrence equation. For the relationship between the lateral pressure and the horizontal displacement, it is assumed that the behavior is linear elastic up to lateral soil yield, and the lateral pressure is constant under the lateral soil yield. The interaction factors between piles subjected to both lateral load and moment are calculated, taking into account the lateral soil movement. The formulation of the lateral displacement and rotation of the pile base subjected to lateral loads in nonhomogeneous soils is presented by taking into account the Mindlin equation and the equivalent thickness for soil layers in the equivalent elastic method. For lateral movement, lateral pressure, bending moment, and interaction factors, there are small differences between results obtained from the 1‐D and the 3‐D displacement methods except a very flexible pile. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
5.
In this paper we investigate the effect of pile group geometry and loading direction on the ultimate lateral soil resistance developing on a tripod foundation, using numerical and analytical upper bound methods. Two distinct kinematic mechanisms are established, corresponding to different failure modes associated with wide and narrow pile spacing. A comparison of tripod group performance against other common pile group layouts suggests that the former results in optimal efficiency for cases when the direction of the lateral load is unknown, such as the foundation of offshore structures subjected to wind, wave and ocean current loads. 相似文献
6.
Yoon Seok Choi Jintae Lee Monica Prezzi Rodrigo Salgado 《Geotechnical and Geological Engineering》2017,35(4):1587-1604
Although the loads applied on piles are usually a combination of both vertical and lateral loads, very limited experimental research has been done on the response of pile groups subjected to combined loads. Due to pile–soil–pile interaction in pile groups, the response of a pile group may differ substantially from that of a single pile. This difference depends on soil state and pile spacing. This paper presents results of experiments designed to investigate pile interaction effects on the response of pile groups subjected to both axial and lateral loads. The experiments were load tests performed on model pile groups (2 × 2 pile groups) in calibration chamber sand samples. The model piles were driven into the sand samples prepared with different relative densities using a sand pluviator. The combined load tests were performed on the model pile groups subjected to different axial load levels, i.e., 0 (pure lateral loading), 25, 50, and 75% of the ultimate axial load capacity of the pile groups, defined as the load corresponding to a settlement of 10% of the model pile diameter. The combined load test results showed that the bending moment and lateral deflection at the head of the piles increased substantially for tests performed in the presence of axial loads, suggesting that the presence of axial loads on groups of piles driven in sand is detrimental to their lateral capacity. 相似文献
7.
Waves and winds can induce lateral loads on piles, which are often multidirectional. The objective of this study is to investigate the response of a single pile subjected to unidirectional and multidirectional lateral loadings using the finite element analysis program ABAQUS. A simplified version of the state-dependent dilatancy model was implemented and embedded into the program to simulate the behavior of the soil around the pile. The results of the analyses indicate that the lateral resistance of the pile along one horizontal direction under multidirectional loading is lower than that under unidirectional loading. The degree of reduction of the resistance increases with the aspect ratio of the displacement path at the pile head. The directions of the force increment vector and the displacement increment vector are generally non-coaxial under multidirectional loading. The soil-pile interaction and soil responses under multidirectional loading are also significantly different than those under unidirectional loading. 相似文献
8.
水平荷载下导管架平台桩基础的非线性有限元分析 总被引：2，自引：0，他引：2
导管架平台桩基础的控制荷载主要为风荷载、波浪荷载、地震荷载等水平荷载,为研究水平荷载下导管架平台桩基础的承载特性,采用非线性有限元分析方法对水平荷载下桩-土之间的相互作用进行研究,提出了有效模拟桩基水平承载特性的有限元模型,分析了模型桩的刚度、直径、土质参数中水平土压力系数、剪胀角对桩基承载特性的影响及水平荷载下群桩承载特性,并将有限元计算结果与API规范及模型试验结果进行对比。研究结果表明,非线性有限元分析方法分析水平荷载下桩-土相互作用是可行的,计算结果可为导管架平台的桩基设计提供参考。 相似文献
9.
This paper presents a non‐linear interface element to compute soil–structure interaction (SSI) based on the macro‐element concept. The particularity of this approach lies in the fact that the foundation is supposed to be infinitely rigid and its movement is entirely described by a system of global variables (forces and displacements) defined in the foundation's centre. The non‐linear behaviour of the soil is reproduced using the classical theory of plasticity. Failure is described by the interaction diagram of the ultimate bearing capacity of the foundation under combined loads. The macro‐element is appropriate for modelling the cyclic or dynamic response of structures subjected to seismic action. More specifically, the element is able to simulate the behaviour of a circular rigid shallow foundation considering the plasticity of the soil under monotonic static or cyclic loading applied in three directions. It is implemented into FedeasLab, a finite element Matlab toolbox. Comparisons with experimental monotonic static and cyclic results show the good performance of the approach. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
10.
A modulus‐multiplier approach, which applies a reduction factor to the modulus of single pile p–y curves to account for the group effect, is presented for analysing the response of each individual pile in a laterally loaded pile group with any geometric arrangement based on non‐linear pile–soil–pile interaction. The pile–soil–pile interaction is conducted using a 3D non‐linear finite element approach. The interaction effect between piles under various loading directions is investigated in this paper. Group effects can be neglected at a pile spacing of 9 times the pile diameter for piles along the direction of the lateral load and at a pile spacing of 6 times the pile diameter for piles normal to the direction of loading. The modulus multipliers for a pair of piles are developed as a function of pile spacing for departure angle of 0, 90, and 180sup>/sup> with respect to the loading direction. The procedure proposed for computing the response of any individual pile within a pile group is verified using two well‐documented full‐scale pile load tests. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
11.
海洋环境中的导管架平台承受着风浪、地震等水平荷载,而平台的稳定对桩基础有严格要求,故研究水平荷载下导管架平台桩-土系统变形规律和相互作用机制具有重要意义。研制了1套导管架平台桩-土相互作用试验系统,主要由导管架平台试验模型子系统、电动伺服加载子系统、传感器与数据采集子系统、振动测试子系统组成,可用于研究冲击荷载、静载、循环荷载下导管架平台的桩身变形规律、桩基周围土体响应及平台的振动特性。通过初步试验结果表明,该系统能够如实反映水平荷载下桩-土间的相互作用和导管架平台的振动特性,验证了该系统的有效性。 相似文献
12.
The load distributions of the grouped piles under lateral loads acting from one side of the pile cap could be approximately modeled using the elasticity equations with the assumptions that the underground structure is rigid enough to sustain the loads, and only small deformations of the soils are yielded. Variations of the soil–pile interactions along the depths are therefore negligible for simplicity. This paper presents the analytical modeling using the dynamic pile‐to‐pile interaction factors for 2 × 2 and 2 × 3 grouped piles. The results were found comparative with the experimental and numerical results of other studies. Similar to others' findings, it was shown that the leading pile could carry more static loads than the trailing pile does. For the piles in the perpendicular direction with the static load, the loads would distribute symmetrically with the centerline whereas the middle pile always sustains the smallest load. For steady‐state loads with operating frequencies up to 30 Hz, the pile load distributions would vary significantly with the frequencies. It is interesting to know that designing the pile foundation needs to be cautioned for steady‐state vibrations as they are a problem of machine foundation. However, for transient loads or any harmonic loads acting upon relatively higher frequencies, the pile loads could be regarded as uniformly distributed. It is hoped that the numerical results of this paper will be helpful in the design practice of pile foundation. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
13.
A multidirectional semi‐analytical method for analysis of laterally loaded pile groups in multi‐layered elastic strata 下载免费PDF全文
下载免费PDF全文 A semi‐analytical method for calculating the response of single piles and pile groups subjected to lateral loading is developed in this paper. Displacements anywhere in the soil domain are tied to the displacements of the piles through decay functions. The principle of virtual work and the calculus of variations are used to derive the governing differential equations that describe the response of the piles and soil. The eigenvalue method and the finite difference technique are used to solve the system of coupled differential equations for the piles and soil, respectively. The proposed method takes into account the soil surface displacement along and perpendicular to the loading direction and produces displacement fields that are very close to those produced by the finite element method but at lower computational effort. Compared with the previous method that considered only the soil displacement along the loading direction, accounting for the multi‐directional soil displacement field produces responses for the piles and soil that are closer to those approximated by the finite element method. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
14.
主应力轴旋转对土体的动力特性有着显著影响。利用GDS动态空心圆柱扭剪仪（HCA）能够实现内围压、外围压、轴力和扭矩四向动态加载的功能,提出了3种主应力方向变化的应力路径加载方式,分析了3种应力路径在实际工程中的应用,并进行了试验验证。当四向动载根据推导的波形函数加载时,可以实现：① 平均主应力p、中主应力系数b和偏应力q保持恒定,主应力轴循环旋转的应力路径;② 平均应力p和中主应力系数b保持不变,偏应力q循环变化,而主应力方向角? = 90°突变的应力路径;③ 平均主应力p、中主应力系数b保持不变,偏应力q、主应力方向角α连续变化的应力路径。应力路径①为模拟海洋波浪荷载作用下的应力路径试验提供了理论依据,应力路径②可用于模拟不同方向地震荷载的作用,应力路径③可以模拟波浪荷载作用下桩周土体的应力路径以及交通荷载作用下的应力路径。 相似文献
15.
In geotechnical practice, it is of considerable importance to assess the behavior of vertical–lateral coupled loading piles in multilayered soil deposits. This study deals with a semi-analytical formulation for the performance of a pile suffering from combined vertical and lateral loads. The emphasis is on quantifying the mobilization of the subgrade reaction provided by the layered soil stratums. In the proposed method, subgrade reactions, correlated with both the accumulative axial load transfer and side resistances depending upon the pile–soil interaction, are abstracted as a series of nonlinear springs in both vertical and lateral directions. On account of this, an alternative transfer matrix method is applied to characterize the pile reaction along the depth under the identified boundary conditions atop the pile; meanwhile, the condition of static equilibrium, between two specific pile segments located at the border of soil layers, is also essential. On this basis, validation of the solution is conducted by comparing with observations from experiments and predictions obtained from other existing methods. In addition, the influence of properties in shallow soil layer and the vertical load on the lateral response of the pile is also discussed. The results indicate a reduction in the lateral displacement and the maximum bending moment within the pile with the increase in the shallow soil stiffness, but a growth with the increase in vertical load due to the “P-Δ effect.” 相似文献
16.
This paper describes the development of a boundary element analysis for the behaviour of single piles and pile groups subjected to general three‐dimensional loading and to vertical and lateral ground movements. Each pile is discretized into a series of cylindrical elements, each of which is divided into several sub‐elements. Compatibility of vertical, lateral and rotational movements is imposed in order to obtain the necessary equations for the pile response. Via hierarchical structures, 12 non‐zero sub‐matrices in a global matrix are derived for the basic influence factors. Solutions are presented for a series of cases involving single piles and pile groups. In each case, the solutions are compared with those from more simplified existing pile analyses such as those developed by Randolph and by Poulos. It is shown that for direct loading effects (e.g. the settlement of piles due to vertical loading), the simplified analyses work well. However, for ‘off‐line’ response (such as the lateral movement due to vertical loading) the differences are greater, and it is believed that the present analysis gives more reliable estimates. Copyright © 2000 John Wiley & Sons, Ltd. 相似文献
17.
Piles may be subjected to lateral soil pressures as a result of lateral soil movements from nearby construction‐related activities such as embankment construction or excavation operations. Three‐dimensional finite element analyses have been carried out to investigate the response of a single pile when subjected to lateral soil movements. The pile and the soil were modelled using 20‐node quadrilateral brick elements with reduced integration. For compatibility between the soil–pile interface elements, 27‐node quadrilateral brick elements with reduced integration were used to model the soil around the pile adjacent to the soil–pile interface. A Mohr–Coulomb elastic–plastic constitutive model with large‐strain mode was assumed for the soil. The analyses indicate that the behaviour of the pile was significantly influenced by the pile flexibility, the magnitude of soil movement, the pile head boundary conditions, the shape of the soil movement profile and the thickness of the moving soil mass. Reasonable agreement is found between some existing published solutions and those developed herein. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
18.
In the present study an analytical procedure based on finite element technique is proposed to investigate the influence of vertical load on deflection and bending moment of a laterally loaded pile embedded in liquefiable soil, subjected to permanent ground displacement. The degradation of subgrade modulus due to soil liquefaction and effect of nonlinearity are also considered. A free headed vertical concrete elastic nonyielding pile with a floating tip subjected to vertical compressive loading, lateral load, and permanent ground displacement due to earthquake motions, in liquefiable soil underlain by nonliquefiable stratum, is considered. The input seismic motions, having varying range of ground motion parameters, considered here include 1989 Loma Gilroy, 1995 Kobe, 2001 Bhuj, and 2011 Sikkim motions. It is calculated that maximum bending moment occurred at the interface of liquefiable and nonliquefiable soil layers and when thickness of liquefiable soil layer is around 60% of total pile length. Maximum bending moment of 1210 kNm and pile head deflection of 110 cm is observed because of 1995 Kobe motion, while 2001 Bhuj and 2011 Sikkim motions amplify the pile head deflection by 14.2 and 14.4 times and bending moment approximately by 4 times, when compared to nonliquefiable soil. Further, the presence of inertial load at the pile head increases bending moment and deflection by approximately 52% when subjected to 1995 Kobe motion. Thus, it is necessary to have a proper assessment of both kinematic and inertial interactions due to free field seismic motions and vertical loads for evaluating pile response in liquefiable soil. 相似文献
19.
Rajni Saggu 《Geomechanics and Geoengineering》2015,10(1):10-29
The present work investigates the behaviour of geothermal energy piles in sand subjected to thermal loading and the resulting soil-structure interaction, numerically using the finite element software Abaqus and user-defined material subroutines for soil. The stress-strain response of sand has been simulated using CASM constitutive model based on critical-state soil mechanics. Detailed parametric sensitivity studies have been carried out to understand the effects of different end conditions of the pile, relative densities of the soil, coefficients of lateral earth pressure of the ground, lengths and diameters of the pile, thermal loads, coefficients of friction at the pile-soil interface, critical-state friction angles of soil, thermal conductivity of soil, specific heat of soil and thermal conductivity of the pile on the stress response of soil, deformation of the pile and soil, and strains in the pile. The results show that negative shear stress is generated in the soil at the pile-soil interface. In the pile with both ends restrained the lateral earth pressure coefficient in soil increases due to high radial strain generation. Moreover, the lateral earth pressure coefficient in soil increases with the increase in the thermal load, the coefficient of friction at the pile-soil interface and the critical-state friction angle of the soil. 相似文献
20.
This paper presents a non‐linear soil–structure interaction (SSI) macro‐element for shallow foundation on cohesive soil. The element describes the behaviour in the near field of the foundation under cyclic loading, reproducing the material non‐linearities of the soil under the foundation (yielding) as well as the geometrical non‐linearities (uplift) at the soil–structure interface. The overall behaviour in the soil and at the interface is reduced to its action on the foundation. The macro‐element consists of a non‐linear joint element, expressed in generalised variables, i.e. in forces applied to the foundation and in the corresponding displacements. Failure is described by the interaction diagram of the ultimate bearing capacity of the foundation under combined loads. Mechanisms of yielding and uplift are modelled through a global, coupled plasticity–uplift model. The cyclic model is dedicated to modelling the dynamic response of structures subjected to seismic action. Thus, it is especially suited to combined loading developed during this kind of motion. Comparisons of cyclic results obtained from the macro‐element and from a FE modelization are shown in order to demonstrate the relevance of the proposed model and its predictive ability. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献