首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
World-class examples of fault-controlled growth basins with associated syn-kinematic sedimentary fill are developed in Upper Triassic prodelta to delta-front deposits exposed at Kvalpynten, SW Edgeøya in East Svalbard. They are interpreted to have interacted with north-westerly progradation of a regional delta system. The syn-kinematic successions consist of 4 to 5 coarsening-upward units spanning from offshore mudstones to subtidal heterolithic bars and compound tidal dunes, which were blanketed by regional, post-kinematic sandstone sheets deposited as laterally continuous, subaqueous tidal dune fields. The rate of growth faulting is reflected in the distribution of accommodation, which governs sedimentary architecture and stacking patterns within the coarsening-upward units. Fully compartmentalized basins (12, 200–800 m wide and c. 150 m high grabens and half grabens) are characterized by syn-kinematic sedimentary infill. These grabens and half-grabens are separated by 60–150 m high horsts composed of pro-delta to distal delta-front mudstones. Grabens host tabular tidal dunes (sandwaves), whereas half-grabens bound by listric faults (mainly south-dipping) consist of wedge-shaped, rotated strata with erosive boundaries proximal to the uplifted fault block crests. Heterolithic tidal bars (sand ridges) occur in narrow half-grabens, showing migration oblique to the faults, up the dipslope. Structureless sandstone wedges and localized subaqueous slumps that formed in response to collapse of the block crests were only documented in half-grabens. Late-kinematic deposition during the final stages of faulting occurred in partly compartmentalized basins, filled with variably thick sets of continuous sandstone belts (compound tidal dunes).  相似文献   

2.
Exhumed basin margin‐scale clinothems provide important archives for understanding process interactions and reconstructing the physiography of sedimentary basins. However, studies of coeval shelf through slope to basin‐floor deposits are rarely documented, mainly due to outcrop or subsurface dataset limitations. Unit G from the Laingsburg depocentre (Karoo Basin, South Africa) is a rare example of a complete basin margin scale clinothem (>60 km long, 200 m‐high), with >10 km of depositional strike control, which allows a quasi‐3D study of a preserved shelf‐slope‐basin floor transition over a ca. 1,200 km2 area. Sand‐prone, wave‐influenced topset deposits close to the shelf‐edge rollover zone can be physically mapped down dip for ca. 10 km as they thicken and transition into heterolithic foreset/slope deposits. These deposits progressively fine and thin over tens of km farther down dip into sand‐starved bottomset/basin‐floor deposits. Only a few km along strike, the coeval foreset/slope deposits are bypass‐dominated with incisional features interpreted as minor slope conduits/gullies. The margin here is steeper, more channelized and records a stepped profile with evidence of sand‐filled intraslope topography, a preserved base‐of‐slope transition zone and sand‐rich bottomset/basin‐floor deposits. Unit G is interpreted as part of a composite depositional sequence that records a change in basin margin style from an underlying incised slope with large sand‐rich basin‐floor fans to an overlying accretion‐dominated shelf with limited sand supply to the slope and basin floor. The change in margin style is accompanied with decreased clinoform height/slope and increased shelf width. This is interpreted to reflect a transition in subsidence style from regional sag, driven by dynamic topography/inherited basement configuration, to early foreland basin flexural loading. Results of this study caution against reconstructing basin margin successions from partial datasets without accounting for temporal and spatial physiographic changes, with potential implications on predictive basin evolution models.  相似文献   

3.
Shelf-margin clinoforms and prediction of deepwater sands   总被引：1，自引：1，他引：1  
Early Eocene successions from Spitsbergen and offshore Ireland, showing well‐developed shelf‐margin clinoforms and a variety of deepwater sands, are used to develop models to predict the presence or absence of turbidite sands in clinoform strata without significant slope disturbance/ponding by salt or mud diapers. The studied clinoforms formed in front of narrow to moderate width (10–60 km) shelves and have slopes, 2–4°, that are typical of accreting shelf margins. The clinoforms are evaluated in terms of both shelf‐transiting sediment‐delivery systems and the resultant partitioning of the sand and mud budget along their different segments. Although this sediment‐budget partitioning is controlled by sediment type and flux, shelf width and gradient, process regime on the shelf and relative sea‐level behaviour, the most tell‐tale or predictive signs in the stratigraphic record appear to be (1) sediment‐delivery system type, (2) degree of shelf‐edge channelling and (3) character of shelf‐edge trajectory through time. The clinoform data sets from the Porcupine Basin (wells and 3‐D seismic) and from the Central Basin on Spitsbergen (outcrops) suggest that river‐dominated deltas are the most efficient delivery systems for dispersing sand into deep water beyond the shelf‐slope break. In addition, low‐angle or flat, channelled shelf‐edge trajectories associate with co‐eval deepwater slope and basin‐floor sands, whereas rising trajectories tend to associate with muddy slopes and basin floors. Characteristic features of the shelf‐edge, slope and basin‐floor segments of clinoforms for these trajectory types are documented. Seismic lines along the slope to basin‐floor transects tend to show apparent up‐dip sandstone pinchouts, but most of these are likely to be simply sidelap features. Dip lines aligned along the axes of sandy fairways show that stratigraphic traps are unlikely, unless slope channels become mud‐filled or are structurally partitioned. Another feature that is prominent in the data sets examined is the lack of slope onlap. During the relative rise of sea level back up to the shelf, the clinoform slopes are generally mud‐prone and they are characteristically aggradational.  相似文献   

4.
Seismic-reflection data show that most deepwater (>200 m water depth) basins are filled by sand and mud dispersed across clinoformal geometries characterized by gently dipping topsets, steeper foresets and gently dipping bottomsets. However, the entire geometry of these ubiquitous clinoforms is not always recognized in outcrops. Sometimes the infill is erroneously interpreted as “layer cake” or “ramp” stratigraphy because the topset-foreset-bottomset clinoforms are not well exposed. Regional 2-D seismic lines show clinoforms in the Lower to Middle Jurassic Challaco, Lajas, and Los Molles formations in S. Neuquén Basin in Argentina. Time equivalent shelf, slope and basin-floor segments of clinoforms are exposed, and can be walked out in hundreds of metres thick and kilometres-wide outcrops. The studied margin-scale clinoforms are not representing a continental-margin but a deepwater shelf margin that built out in a back-arc basin. Lajas-Los Molles clinoforms have been outcrop-mapped by tracing mudstones interpreted as flooding surfaces on the shelf and abandonment surfaces (low sedimentation rate) in the deepwater basin. The downslope and lateral facies variability in the outcrops is also consistent with a clinoform interpretation. The Lajas topset (shelf) is dominated by fluvial and tidal deposits. The shelf-edge rollover zone is occasionally occupied by a 40–50-m-thick coarse-grained shelf-edge delta, sometimes incising into the underlying slope mudstones, producing oblique clinoforms expressing toplap erosion on seismic. A muddy transgressive phase capping the shelf-edge deltas contains tidal sandbodies. Shelf-edge deltas transition downslope into turbidite- and debris flow-filled channels that penetrate down the mud-prone Los Molles slope. At the base-of-slope, some 300m below the shelf edge, there are basin-floor fan deposits (>200 m thick) composed of sandy submarine-fan lobes separated by muddy abandonment intervals. The large-scale outcrop correlation between topset–foreset–bottomset allows facies and depositional interpretation and sets outcrop criteria recognition for each clinoform segment.  相似文献   

5.
《Basin Research》2018,30(4):688-707
Investigations of syn‐sedimentary growth faults in the Last Chance delta (Ferron Sandstone, Utah, USA) show that fault‐bounded half‐grabens arrested high amounts of sand in the mouth bar and/or distributary channel areas. Fault‐controlled morphology causes changes in routing of the delta top to delta front drainage towards the long axis of half‐grabens. Faulting was spatially and temporally non‐systematic, and polyphase, with 3D cusp/listric fault geometries instigated by linkage of variously oriented segments. Hanging wall rollover folds consisting of wedge‐shaped syn‐kinematic sand attest to rapid <1‐m slip increments on faults followed by mild erosion along crests of fault blocks and sedimentary infill of adjacent accommodation. Triangle‐zones in prodelta to delta front muds are located underneath steeper faults and interconnected rotated fault‐flats. Their geometry is that of antiformal stack duplexes, in an arrangement of low‐angle‐to‐bedding normal faults at the base, replaced by folded thrusts upwards. These faults show a brittle, frictional flow deformation mechanism ascribed to early compaction of mud. For syn‐kinematic sand, there is a change from general granular/hydroplastic flow in shear zones to later brittle failure and cataclasis, a transition instigated by precipitation of calcite cement. Extensional faulting in the Last Chance delta was likely controlled by gravity driven collapse towards the delta slope and prodelta, as is commonly observed in collapsing deltas. The trigger and driving mechanism is envisioned as localized loads from sand deposited within distributary channels/mouth bars and fault‐controlled basins along the delta top. A regional tilt and especially displacement of compacted mud below sand bodies towards less compacted muds also contributed to the faulting.  相似文献   

6.
苏北废黄河水下三角洲沉积范围研究述评   总被引：2，自引：0，他引：2  
详细梳理现有研究成果,目前对1128-1855年废黄河水下三角洲沉积范围的划分可总结为三类主要观点：① 外缘位于废黄河口外近岸、远岸斜坡带之间的宽缓平台（水深范围：-15~-25 m）之上;② 外缘位于废黄河口外远岸斜坡带（水深范围：-25~-45 m）之外;③ 外缘可达-45 m等深线之外,且废黄河三角洲由一个近岸/远岸复合楔形沉积体构成。综合分析废黄河水下三角洲海域海底地形地貌、浅部地层沉积特征与14C年代、浅层声学地层等资料数据表明,1128-1855年废黄河水下三角洲的延伸范围应该超过现今-20 m等深线,但未越过远岸斜坡带;远岸斜坡带发育的厚层楔形体不大可能是废黄河三角洲前缘沉积层,其确切成因、物源与年代等问题尚有待于进一步深入研究。为准确圈定1128-1855年废黄河水下三角洲沉积范围,需要对完整覆盖本区的高质量浅层地震剖面进行解译分析,在其三大地形单元（近岸、远岸斜坡带及其之间宽缓平台）内补充钻孔分析,并参考1875年以来各期海图资料来进行综合判定。  相似文献   

7.
Clinoforms with a range of scales are essential elements of prograding continental margins. Different types of clinoforms develop during margin growth, depending on combined changes in relative sea level, sediment supply and oceanographic processes. In studies of continental margin stratigraphy, trajectories of clinoform ‘rollover’ points are often used as proxies for relative sea-level variation and as predictors of the character of deposits beyond the shelf-break. The analysis of clinoform dynamics and rollover trajectory often suffers from the low resolution of geophysical data, the small scale of outcrops with respect to the dimensions of clinoform packages and low chronostratigraphic resolution. Here, through high-resolution seismic reflection data and sediment cores, we show how compound clinoforms were the most common architectural style of margin progradation of the late Pleistocene lowstand in the Adriatic Sea. During compound clinoform development, the shoreline was located landward of the shelf-break. It comprised a wave-dominated delta to the west and a barrier and back-barrier depositional system in the central and eastern area. Storm-enhanced hyperpycnal flows were responsible for the deposition of a sandy lobe in the river mouth, whereas a heterolithic succession formed elsewhere on the shelf. The storm-enhanced hyperpycnal flows built an apron of sand on the slope that interrupted an otherwise homogeneous progradational mudbelt. Locally, the late lowstand compound clinoforms have a flat to falling shelf-break trajectory. However, the main phase of shelf-break bypass and basin deposition coincides with a younger steeply rising shelf-break trajectory. We interpret divergence from standard models, linking shelf-break trajectory to deep-sea sand deposition, as resulting from a great efficiency of oceanographic processes in reworking sediment in the shelf, and from a high sediment supply. The slope foresets had a large progradational attitude during the late lowstand sea-level rise, showing that oceanographic processes can inhibit coastal systems to reach the shelf-edge. In general, our study suggests that where the shoreline does not coincide with the shelf-break, trajectory analysis can lead to inaccurate reconstruction of the depositional history of a margin.  相似文献   

8.
Glaciolacustrine kames in the Bielsk Podlaski area (eastern Poland) exhibit a unique regular pattern. Three representative morphological kame types were chosen for detailed sedimentological analyses, specifically: isolated, isometric mounds; isolated, elongated hills; and branching ridges. All types comprised fine‐grained sandy and sandy/silty deposits. Lithofacies analysis resulted in the distinction of several lithofacies associations. Associations dominated by medium‐ or large‐scale, massive or horizontally laminated sands are interpreted as proximal subaqueous fans; associations dominated by medium‐ or small‐scale lithofacies of ripple‐drift cross‐laminated sand are interpreted as distal subaqueous fans; and those dominated by sandy/silty, silty or silty/clayey lithofacies with horizontal lamination are interpreted as lake bottomsets. Rates of sediment accumulation appear to have been fast, resulting in syndepositional and metadepositional deformation structures of two types: water‐escape structures, and slumps on subaqueous slopes. After the ice‐walled lake basins filled with sediment, glaciofluvial erosion and deposition alternated, resulting in erosional channels of up to 1 m deep, later filled with gravel or gravely sand. The results indicate that kames developed in a supraglacial environment within a topography of ice‐cored moraines containing ice‐walled lakes that persisted due to the presence of permafrost. Pauses during retreat of the ice walls resulted in ice‐contact deformations at the edges of the kames. Kame formation is therefore consistent with a continental climate and this may explain the increased abundance of this type of kame system in Eastern Europe.  相似文献   

9.
Detailed seismic stratigraphic analysis of 2D seismic data over the Faroe‐Shetland Escarpment has identified 13 seismic reflection units that record lava‐fed delta deposition during discrete periods of volcanism. Deposition was dominated by progradation, during which the time shoreline migrated a maximum distance of ～44 km in an ESE direction. Localised collapse of the delta front followed the end of progradation, as a decrease in volcanic activity left the delta unstable. Comparison with modern lava‐fed delta systems on Hawaii suggests that syn‐volcanic subsidence is a potential mechanism for apparent relative sea level rise and creation of new accommodation space during lava‐fed delta deposition. After the main phase of progradation, retrogradation of the delta occurred during a basinwide syn‐volcanic relative sea level rise where the shoreline migrated a maximum distance of ～75 km in a NNW direction. This rise in relative sea level was of the order of 175–200 m, and was followed by the progradation of smaller, perched lava‐fed deltas into the newly created accommodation space. Active delta deposition and the emplacement of lava flows feeding the delta front lasted ～2600 years, although the total duration of the lava‐fed delta system, including pauses between eruptions, may have been much longer.  相似文献   

10.
Sediment supply rate and accommodation regime represent primary controls on the depositional architecture of basin margin successions, but their interaction is commonly inferred from 2D dip profiles and/or with limited constraints on sedimentary facies. In this study, three parallel (>40 km long) 2D depositional oblique‐dip profiles from outcrops of the lower Waterford Formation (Karoo Basin, South Africa) have been correlated. This data set provides a rare opportunity to assess the lateral variability in the sedimentary process record of the shelf‐to‐slope transition for eight successive clinothems over a 900 km2 area. The three profiles show similar shelf‐edge rollover trajectories, but this belies significant along‐margin variability in sedimentary processes and down‐dip sediment supply. The depositional architecture of three successive clinothems (WfC 3, 4 and 5) also show along‐shelf physiographic differences. The reconstructed shelf‐edge rollover position is not straight, and a westward curve to the north coincides with an area of greater sand supply to the slope beyond a shelf dominated by wave and storm processes. All the clinothems thicken northwards, indicating an along‐margin long‐term increase in accommodation that was maintained through multiple shoreline transits across the shelf. The origin of the differential subsidence cannot be discriminated confidently between tectonic or compaction processes. The interplay of basin margin physiography, differential subsidence rate and process regime resulted in significant across‐strike variability in the style and timing of sediment dispersal patterns beyond the shelf‐edge rollover. This study highlights the challenge for accurate prediction of the sediment partitioning across the shelf‐edge rollover in subsurface studies.  相似文献   

11.
The adequate documentation and interpretation of regional‐scale stratigraphic surfaces is paramount to establish correlations between continental and shallow marine strata. However, this is often challenged by the amalgamated nature of low‐accommodation settings and control of backwater hydraulics on fluvio‐deltaic stratigraphy. Exhumed examples of full‐transect depositional profiles across river‐to‐delta systems are key to improve our understanding about interacting controlling factors and resultant stratigraphy. This study utilizes the ~400 km transect of the Cenomanian Mesa Rica Sandstone (Dakota Group, USA), which allows mapping of down‐dip changes in facies, thickness distribution, fluvial architecture and spatial extent of stratigraphic surfaces. The two sandstone units of the Mesa Rica Sandstone represent contemporaneous fluvio‐deltaic deposition in the Tucumcari sub‐basin (Western Interior Basin) during two regressive phases. Multivalley deposits pass down‐dip into single‐story channel sandstones and eventually into contemporaneous distributary channels and delta‐front strata. Down‐dip changes reflect accommodation decrease towards the paleoshoreline at the Tucumcari basin rim, and subsequent expansion into the basin. Additionally, multi‐storey channel deposits bound by erosional composite scours incise into underlying deltaic deposits. These represent incised‐valley fill deposits, based on their regional occurrence, estimated channel tops below the surrounding topographic surface and coeval downstepping delta‐front geometries. This opposes criteria offered to differentiate incised valleys from flood‐induced backwater scours. As the incised valleys evidence relative sea‐level fall and flood‐induced backwater scours do not, the interpretation of incised valleys impacts sequence stratigraphic interpretations. The erosional composite surface below fluvial strata in the continental realm represents a sequence boundary/regional composite scour (RCS). The RCS’ diachronous nature demonstrates that its down‐dip equivalent disperses into several surfaces in the marine part of the depositional system, which challenges the idea of a single, correlatable surface. Formation of a regional composite scour in the fluvial realm throughout a relative sea‐level cycle highlights that erosion and deposition occur virtually contemporaneously at any point along the depositional profile. This contradicts stratigraphic models that interpret low‐accommodation settings to dominantly promote bypass, especially during forced regressions. Source‐to‐sink analyses should account for this in order to adequately resolve timing and volume of sediment storage in the system throughout a complete relative sea‐level cycle.  相似文献   

12.
Salt rim synclines contain important hydrocarbon and coal resources in central Europe. The Schöningen salt rim syncline is filled with >300 m of Early to Middle Eocene unconsolidated clastics with interbedded lignitic coal seams that are mined at the surface. In this study, 357 lithologic logs are integrated with measured outcrop sections and paleo‐botanical data to interpret the depositional environments and sequence stratigraphic framework of the rim syncline fill. As salt withdrew, it generated an elongate mini‐basin that mimicked an incised valley. The sustained accommodation and slow broadening of the syncline affected the stratigraphic architecture and contributed to the preservation of coal units. The clastic units in the syncline filled in seven depositional stages: (1) tidally influenced fluvial estuarine channels; (2) mixed tide‐ and wave‐ dominated estuaries; (3) prograding wave dominate deltas; (4) transgressive shoreline deposits; (5) braided fluvial channels; (6) estuaries; and (7) prograding tide‐dominated channels. The succession defines four 3rd order sequences and several higher order sequences that are possibly related to Milankovitch cycles. The higher order sequences are dominantly characterized by stacked transgressive cycles of thick, lowstand coals overlain by estuarine sands. The nearly continuous warm and wet Eocene climate was conducive to continuous peat production with a climatic overprint recorded in the mire type: ombrotrophic mires developed in wetter times and rheotrophic mires developed in relatively drier conditions pointing to the presence of orbitally controlled seasonality. Both mire types were impacted by the interplay of subsidence and base‐level. The continuous dropping of the mires below base‐level via subsidence protected the mires against erosion and may account for the absence of coals outside of the rim synclines in the region.  相似文献   

13.
The Tombador Formation exhibits depositional sequence boundaries placed at the base of extensive amalgamated fluvial sand sheets or at the base of alluvial fan conglomeratic successions that indicate basinward shifts of facies. The hierarchy system that applies to the Tombador Formation includes sequences of different orders, which are defined as follows: sequences associated with a particular tectonic setting are designated as ‘first order’ and are separated by first‐order sequence boundaries where changes in the tectonic setting are recorded; second‐order sequences represent the major subdivisions of a first‐order sequence and reflect cycles of change in stratal stacking pattern observed at 102 m scales (i.e., 200–300 m); changes in stratal stacking pattern at 101 m scales indicate third‐order sequences (i.e., 40–70 m); and changes in stratal stacking pattern at 100 m scales are assigned to the fourth order (i.e., 8–12 m). Changes in palaeogeography due to relative sea level changes are recorded at all hierarchical levels, with a magnitude that increases with the hierarchical rank. Thus, the Tombador Formation corresponds to one‐first‐order sequence, representing a distinct intracratonic sag basin fill in the polycyclic history of the Espinhaço Supergroup in Chapada Diamantina Basin. An angular unconformity separates fluvial‐estuarine to alluvial fan deposits and marks the second‐order boundary. Below the angular unconformity the third‐order sequences record fluvial to estuarine deposition. In contrast, above the angular unconformity these sequences exhibit continental alluvial successions composed conglomerates overlain by fluvial and eolian strata. Fourth‐order sequences are recognized within third‐order transgressive systems tract, and they exhibit distinct facies associations depending on their occurrence at estuarine or fluvial domains. At the estuarine domain, they are composed of tidal channel, tidal bar and overlying shoreface heterolithic strata. At the fluvial domain the sequences are formed of fluvial deposits bounded by fine‐grained or tidal influenced intervals. Fine grained intervals are the most reliable to map in fourth‐order sequences because of their broad laterally extensive sheet‐like external geometry. Therefore, they constitute fourth‐order sequence boundaries that, at the reservoir approach, constitute the most important horizontal heterogeneity and, hence, the preferable boundaries of production zones. The criteria applied to assign sequence hierarchies in the Tombador Formation are based on rock attributes, are easy to apply, and can be used as a baseline for the study of sequence stratigraphy in Precambrian and Phanerozoic basins placed in similar tectonic settings.  相似文献   

14.
Multichannel high‐resolution seismic and multibeam data were acquired from the Maldives‐isolated carbonate platform in the Indian Ocean for a detailed characterization of the Neogene bank architecture of this edifice. The goal of the research is to decipher the controlling factors of platform evolution, with a special emphasis on sea‐level changes and changes of the oceanic currents. The stacking pattern of Lower to Middle Miocene depositional sequences, with an evolution of a ramp geometry to a flat‐topped platform, reflects variations of accommodation, which here are proposed to be primarily governed by fluctuations of relative sea level. Easterly currents during this stage of bank growth controlled an asymmetric east‐directed progradation of the bank edge. During the late middle Miocene, this system was replaced by a twofold configuration of bank development. Bank growth continued synchronously with partial bank demise and associated sediment‐drift deposition. This turnover is attributed to the onset and/or intensification of the Indian monsoon and related upwelling and occurrence of currents, locally changing environmental conditions and impinging upon the carbonate system. Mega spill over lobes, shaped by reversing currents, formed as large‐scale prograding complexes, which have previously been interpreted as deposits formed during a forced regression. On a regional scale, a complex carbonate‐platform growth can occur, with a coexistence of bank‐margin progradation and aggradation, as well as partial drowning. It is further shown that a downward shift of clinoforms and offlapping geometries in carbonate platforms are not necessarily indicative for a sea‐level driven forced regression. Findings are expected to be applicable to other examples of Cenozoic platforms in the Indo‐Pacific region.  相似文献   

15.
The syn‐rift/post‐rift transition of the late Ediacaran‐mid Cambrian Atlas rift is characterized by the interplay of several processes, such as a widespread episode of fracturing and tilting, associated with encasement of fault‐controlled vein metallic ore deposits of economic importance, and carbonate production and phosphogenesis (Taguedit Bed, Tabia Member) bordering rift‐flank uplifts. A correlatable unconformity marks the end of these processes and the beginning of a thermal subsidence‐dominated regime with development of a more stable, carbonate, peritidal‐dominated platform (Tifnout Member). Late Ediacaran microbial carbonate production and phosphogenesis extended in discontinuous belts around the periphery of uplifted rift shoulders and flanks. Karst development is interpreted to have formed along synsedimentary faults and fractures during abrupt tectonic uplift associated with emplacement of polymetallic hydrothermal dikes (rich in Cu, Fe and subsidiary Pb, Zn). Isotopic analysis indicates that speleothem precipitation in karstic palaeocaves displays significantly lighter δ13C and δ18O values as compared to the host dolomite, implying calcite precipitation by terrestrial fluids rich in decomposing organic matter and/or microbial activity in the cave system.  相似文献   

16.
The western flank of the Jerudong Anticline, onshore Brunei Darussalam, provides a rare opportunity to analyse the base of a major Miocene mud‐rich delta in outcrop, including kilometre‐scale prograding clinoforms, delta‐front turbidites and large‐scale syndepositional faults. The lateral continuation of this system in the subsurface of the Belait Syncline is documented on two‐dimensional (2D) reflection seismic data and wireline logs. In order to link geological observations at surface with corresponding geophysical subsurface signatures, we constructed a combined, quantitative 3D surface–subsurface model of onshore Brunei Darussalam. This 3D model is used to analyse and discuss the relation between field geology and geophysical subsurface interpretation, and provides the base for a quantitative kinematic restoration of the Miocene Belait delta to its original shape before folding. Final decompaction of the balanced rock volume allows the reconstruction of the palaeo‐relief of a series of Miocene clinoforms, indicating a close relation between delta‐lobe activity, clinoform morphology and the generation of delta‐front turbidites.  相似文献   

17.
A new subtype of Gilbert-type fan deltas, ‘the trapezoidal fan delta’, characterized by the absence of bottomset deposits, is recognized in the south-western active margins of the Corinth rift in central Greece. They are formed adjacent to master extensional listric faults and developed by progradation either onto a subaqueous basin escarpment or across a subaerial platform where alluvial fans have accumulated. Simultaneously with master fault activity, displacements on counter faults along intrabasinal basement highs produced fan delta foreset deposits. Furthermore, footwall imbrication and uplift along the listric faults, as well as transfer fault displacement, have strongly influenced the pattern of fan delta sedimentation.  相似文献   

18.
Utilizing two outcrop data sets with dip direction exposures of shallow-water (tens of meters) deltaic clinoforms, this paper quantifies sedimentary facies proportions and clinoform lengths and gradients, and links process regimes to delta clinoform dimensions. Both data sets are from foreland basins, the Cretaceous Chimney Rock Sandstone of the Rock Springs Formation from the US Western Interior, and the Eocene Brogniartfjellet Clinoform Complex 8 of the Battfjellet Formation from the Central Basin of Spitsbergen. Sedimentary facies indicate presence of both river- and wave-dominated clinothems in each data set. Facies characteristics and distribution implies that river-dominated clinothem progradation was primarily driven by deposition from weak hyperpycnal flow turbidity currents across the clinoforms, and minor slumps. Wave-dominated clinothems were constructed by wave processes rather than alongshore currents, and are also progradational subaerial clinoforms, with one exception, where the formation of a compound subaqueous clinoform set indicates erosion and sediment bypass above the wave base. Sediment distribution and lithological heterogeneity in the river-dominated clinothems is controlled by individual hyperpycnal flow events or mouth-bar collapse events, and thus by self-organization and minimal reworking that results in a heterogeneity that is difficult to predict (high entropy). The efficient reworking of river-derived sediments in wave-dominated clinothems results in predictable lithological sediment partitioning (low entropy). Clinoform dimension analyses show that although of similar sediment caliber, river-dominated clinoforms in both data sets are on average 3–4 times steeper and 3–4 times shorter than the wave-dominated clinoforms, with mean gradients of ca 4 degrees and ca 1 degree, respectively, and mean lengths of 150–230 m and 640–760 m. These results require corroboration from additional data sets, but do suggest that river- and wave-dominated delta clinoforms are likely to have distinct downdip extents (lengths) and gradients for given clinoform heights. Clinoform shape can thus be a method for differentiating ancient river- vs. wave-dominated deltaic clinoforms, in addition to their sedimentary facies, biogenic features and sandstone maturity, and helpful when incorporated into reservoir models.  相似文献   

19.
The thickness and distribution of early syn‐rift deposits record the evolution of structures accommodating the earliest phases of continental extension. However, our understanding of the detailed tectono‐sedimentary evolution of these deposits is poor, because in the subsurface, they are often deeply buried and below seismic resolution and sparsely sampled by borehole data. Furthermore, early syn‐rift deposits are typically poorly exposed in the field, being buried beneath thick, late syn‐rift and post‐rift deposits. To improve our understanding of the tectono‐sedimentary development of early syn‐rift strata during the initial stages of rifting, we examined quasi‐3D exposures in the Abura Graben, Suez Rift, Egypt. During the earliest stage of extension, forced folding above blind normal fault segments, rather than half‐graben formation adjacent to surface‐breaking faults, controlled rift physiography, accommodation development and the stratigraphic architecture of non‐marine, early syn‐rift deposits. Fluvial systems incised into underlying pre‐rift deposits and were structurally focused in the axis of the embryonic depocentre, which, at this time, was characterized by a fold‐bound syncline rather than a fault‐bound half graben. During this earliest phase of extension, sediment was sourced from the rift shoulder some 3 km to the NE of the depocentre, rather than from the crests of the flanking, intra‐basin extensional forced folds. Fault‐driven subsidence, perhaps augmented by a eustatic sea‐level rise, resulted in basin deepening and the deposition of a series of fluvial‐dominated mouth bars, which, like the preceding fluvial systems, were structurally pinned within the axis of the growing depocentre, which was still bound by extensional forced folds rather than faults. The extensional forced folds were eventually locally breached by surface‐breaking faults, resulting in the establishment of a half graben, basin deepening and the deposition of shallow marine sandstone and fan‐delta conglomerates. Because growth folding and faulting were coeval along‐strike, syn‐rift stratal units deposited at this time show a highly variable along‐strike stratigraphic architecture, locally thinning towards the growth fold but, only a few kilometres along‐strike, thickening towards the surface‐breaking fault. Despite displaying the classic early syn‐rift stratigraphic motif recording net upward‐deepening, extensional forced folding rather than surface faulting played a key role in controlling basin physiography, accommodation development, and syn‐rift stratal architecture and facies development during the early stages of extension. This structural and stratigraphic observations required to make this interpretation are relatively subtle and may go unrecognized in low‐resolution subsurface data sets.  相似文献   

20.
In this paper, we will present the stratigraphic evolution, internal facies architecture and geomorphology of the Middle Pleistocene Emme delta, controlled by rapid high‐amplitude lake‐level change. The Emme delta was deposited on the northern margin of glacial Lake Weser, located in north‐west Germany. Rates of lake‐level rise were probably >50 mm year?1 and rates of lake‐level fall 30–50 m within a few days or weeks, due to the opening of lake outlets. We use digital elevation models, sedimentology and shear wave seismics to improve earlier reconstructions and investigate the influence of rapid base‐level change on delta development. Shear wave seismic data resolve architectural elements in the range of metres and bridge the common gap between outcrop and conventional compression wave seismic data. The radial delta complex is about 2 km long, 1.8 km wide and up to 70 m thick, overlying a concave, up to 13° steep dipping ramp surface. It consists of vertically and laterally stacked delta lobes, caused by lobe switching during base‐level change. During the lake‐level rise, vertically stacked (Gilbert‐type) delta systems formed. The decrease in thickness and lateral extent indicates a rapid upslope shift of depocentres. A high rate and magnitude of lake‐level fall (50 m) promoted the development of a single incised valley and the deposition of forced regressive coarse‐grained delta lobes in front of the valley. The incised valley was filled during decreasing rates of lake‐level fall and low base‐level, because the alluvial gradient was larger than the emergent lake profile. Attached sand‐rich forced regressive aprons formed during lower magnitudes of lake‐level falls in the range of 30–35 m. Valley incision occurred, but was limited to the uppermost portion of the delta, controlled by the steep slope. The incised valley related to the final lake drainage is associated with long‐wavelength (60–90 m) bedforms at the downslope end, attributed to the formation of standing waves as a result of a hydraulic jump. Estimated palaeoflow depth during standing wave formation was ～9–14 m and flow velocity was 10–12 m s?1. Because subsidence, waves or tides did not play a major role, the Emme delta can be used as an analogue‐based predictive stratigraphical and sedimentological model for steep glacigenic deltas controlled by rapid base‐level change and can help to understand better the facies distribution and three‐dimensional geometry of these depositional systems.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号