首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 265 毫秒
1.
Temporally weighted average curve number method for daily runoff simulation   总被引：1，自引：0，他引：1  
Nam Won Kim  Jeongwoo Lee 《水文研究》2008,22(25):4936-4948
The modified Soil Conservation Service curve number (CN) method is widely used in long‐term continuous models to predict daily surface runoff. However, it has been shown that this method gives poor results in reproducing peak flows in high rainfall periods. This is because there is an inaccuracy stemming from the model algorithm as it adjusts the daily runoff curve number as a function of soil moisture content at the end of the previous day. This paper proposes an alternative daily based curve number technique that can provide better prediction of daily runoff during the high flow season. The proposed method uses the temporally weighted average curve number (TWA‐CN) to estimate daily surface runoff, while considering the effect of rainfall during a given day as well as the antecedent soil moisture condition. To test the applicability of the TWA‐CN method, it was incorporated with the long‐term, continuous simulation watershed models SWAT and SWAT‐G. Simulations were conducted for the Miho River watershed located in the middle of South Korea. The graphical displays and statistics of the determination coefficient (R2) and the Nash–Sutcliffe model efficiency (NSE) of the observed and simulated daily runoff indicated that the modified SWAT with the TWA‐CN method may provide better runoff prediction (R2 = 0·837, NSE = 0·833) than the original SWAT (R2 = 0·815, NSE = 0·824). Likewise, the determination coefficient (R2 = 0·816) and the Nash–Sutcliffe efficiency (NSE = 0·834) for the modified SWAT‐G are also higher than the original version (R2 = 0·782, NSE = 0·825). It is expected that the improved capability in predicting surface runoff using the suggested CN estimate method will provide a sound contribution to the accurate simulations of water yield. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

2.
The present effect of watershed subdivision on simulated water balance components using the thoroughly tested Soil and Water Assessment Tool (SWAT) model has been evaluated for the Nagwan watershed in eastern India. Observed meteorological and hydrological data (daily rainfall, temperature, relative humidity and runoff) for the years 1995 to 1998 were collected and used. The watershed and sub‐watershed boundaries, slope and soil texture maps were generated using a geographical information system. A supervised classification method was used for land‐use/cover classification from satellite imagery of 1996. In order to study the effect of watershed subdivision, the watershed was spatially defined into three decomposition schemes, namely a single watershed, and 12 and 22 sub‐watersheds. The simulation using the SWAT model was done for a period of 4 years (1995 to 1998). Results of the study showed a perfect water balance for the Nagwan watershed under all of the decomposition schemes. Results also revealed that the number and size of sub‐watersheds do not appreciably affect surface runoff. Except for runoff, there was a marked variation in the individual components of the water balance under the three decomposition schemes. Though the runoff component of the water balance showed negligible variation among the three cases, variations were noticed in the other components: evapotranspiration (5 to 48%), percolation (2 to 26%) and soil water content (0·30 to 22%). Thus, based on this study, it is concluded that watershed subdivision has a significant effect on the water balance components. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

3.
Runoff estimations based on the standard USDA–NRCS curve number (CN) table without calibration have a tendency to give inaccurate results when the CN values are applied in South Korea which has many high slope watersheds and that has a continental monsoon climate. Particularly for the design flood estimation, accurately calibrated CN values are required because the estimated peak flow is very sensitive to the selection of CN. However, the lack of flood data makes it difficult to calibrate and assign runoff CNs to Korean watersheds. Even if sufficient data are available to estimate CN values, it is also difficult to obtain the direct flows by separating base flows from total runoff hydrographs due to the temporal irregularity of rainfall events and the resulting complex pattern of runoff. Therefore, an alternative method for estimating CNs needs to be developed to overcome these issues. The purpose of this study is to present a method for estimating runoff CNs using the soil and water assessment tool (SWAT) model which can take into account watershed heterogeneities such as climate conditions, land use and soil types. The proposed CN estimation method uses the simulated flow data by SWAT instead of using measured flow data. This method has advantages in estimating CN values spatially for each subbasin division considering watershed characteristics. The use of daily data can reduce the sensitivity to the abnormality that is commonly involved in flow data with a small time scale. The SWAT‐based CN estimation method, combined with the asymptotic CN method, was applied to the Chungju dam watershed in South Korea. A regression equation was then developed from this approach, which was used to estimate CN values that decrease exponentially as rainfall amounts increase and that converge to 60·6 and 79·4 without and with considering subsurface lateral flow, respectively. Furthermore, the CN values for the antecedent moisture conditions were determined using the probabilistic approach. The CN associated with the 50% probability for the Chungju dam watershed is 87·8 which can be taken to be representative of antecedent moisture condition (AMC) II. The CNI and CNIII associated with 90% and 10% probabilities are 78·9 and 94·1, respectively. The estimated CNII = 87·8 differs markedly from the geographic information system (GIS)‐based CN 65·0, which implies that the standard USDA–NRCS CN method should be calibrated to the studied area of interest. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

4.
Lake Tana Basin is of significant importance to Ethiopia concerning water resources aspects and the ecological balance of the area. Many years of mismanagement, wetland losses due to urban encroachment and population growth, and droughts are causing its rapid deterioration. The main objective of this study was to assess the performance and applicability of the soil water assessment tool (SWAT) model for prediction of streamflow in the Lake Tana Basin, so that the influence of topography, land use, soil and climatic condition on the hydrology of Lake Tana Basin can be well examined. The physically based SWAT model was calibrated and validated for four tributaries of Lake Tana. Sequential uncertainty fitting (SUFI‐2), parameter solution (ParaSol) and generalized likelihood uncertainty estimation (GLUE) calibration and uncertainty analysis methods were compared and used for the set‐up of the SWAT model. The model evaluation statistics for streamflows prediction shows that there is a good agreement between the measured and simulated flows that was verified by coefficients of determination and Nash Sutcliffe efficiency greater than 0·5. The hydrological water balance analysis of the basin indicated that baseflow is an important component of the total discharge within the study area that contributes more than the surface runoff. More than 60% of losses in the watershed are through evapotranspiration. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

5.
Most semi‐distributed watershed water quality models divide the watershed into hydrologic response units (HRU) with no flow among them. This is problematic when watersheds are delineated to include variable source areas (VSAs) because it is the lateral flows from upslope areas to downslope areas that generate VSAs. Although hydrologic modellers have often successfully calibrated these types of models, there can still be considerable uncertainty in model results. In this paper, a topographic‐index‐based method is described and tested to distribute effective soil water holding capacity among HRUs, which can be subsequently adjusted using the watershed baseflow coefficient. The method is tested using a version of the Soil and Water Assessment Tool (SWAT) model that simulates VSA runoff and is applied to two watersheds: a New York State (NYS) watershed, and one in the head waters of the Blue Nile Basin (BNB) in Ethiopia. Daily streamflow predicted using effective soil water storage capacities based only on the topographic index were reassuringly accurate in both the NYS watershed (daily Nash Sutcliffe (E) = 0·73) and in the BNB (E = 0·70). Using the baseflow coefficient to adjust the effective soil water storage capacity only slightly improved streamflow predictions in NYS (E = 0·75) but substantially improved the BNB predictions (E = 0·80). By comparison, the standard SWAT model, which uses the traditional look‐up tables to determine a runoff curve number, performed considerably less accurately in un‐calibrated form (E = 0·51 for NYS and E = 0·45 for BNB), but improved substantially when explicitly calibrated to streamflow measurements (E = 0·76 for NYS and E = 0·67 for the BNB). The calibration method presented here provides a parsimonious, systematic approach to using established models in VSA watersheds that reduces the ambiguity inherent in model calibration. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

6.
This study was conducted under the USDA‐Conservation Effects Assessment Project (CEAP) in the Cheney Lake watershed in south‐central Kansas. The Cheney Lake watershed has been identified as ‘impaired waters’ under Section 303(d) of the Federal Clean Water Act for sediments and total phosphorus. The USDA‐CEAP seeks to quantify environmental benefits of conservation programmes on water quality by monitoring and modelling. Two of the most widely used USDA watershed‐scale models are Annualized AGricultural Non‐Point Source (AnnAGNPS) and Soil and Water Assessment Tool (SWAT). The objectives of this study were to compare hydrology, sediment, and total phosphorus simulation results from AnnAGNPS and SWAT in separate calibration and validation watersheds. Models were calibrated in Red Rock Creek watershed and validated in Goose Creek watershed, both sub‐watersheds of the Cheney Lake watershed. Forty‐five months (January 1997 to September 2000) of monthly measured flow and water quality data were used to evaluate the two models. Both models generally provided from fair to very good correlation and model efficiency for simulating surface runoff and sediment yield during calibration and validation (correlation coefficient; R2, from 0·50 to 0·89, Nash Sutcliffe efficiency index, E, from 0·47 to 0·73, root mean square error, RMSE, from 0·25 to 0·45 m3 s?1 for flow, from 158 to 312 Mg for sediment yield). Total phosphorus predictions from calibration and validation of SWAT indicated good correlation and model efficiency (R2 from 0·60 to 0·70, E from 0·63 to 0·68) while total phosphorus predictions from validation of AnnAGNPS were from unsatisfactory to very good (R2 from 0·60 to 0·77, E from ? 2·38 to 0·32). The root mean square error–observations standard deviation ratio (RSR) was estimated as excellent (from 0·08 to 0·25) for the all model simulated parameters during the calibration and validation study. The percentage bias (PBIAS) of the model simulated parameters varied from unsatisfactory to excellent (from 128 to 3). This study determined SWAT to be the most appropriate model for this watershed based on calibration and validation results. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

7.
The curve number (CN) method is widely used for rainfall–runoff modelling in continuous hydrologic simulation models. A sound continuous soil moisture accounting procedure is necessary for models using the CN method. For shallow soils and soils with low storage, the existing methods have limitations in their ability to reproduce the observed runoff. Therefore, a simple one‐parameter model based on the Soil Conservation Society CN procedure is developed for use in continuous hydrologic simulation. The sensitivity of the model parameter to runoff predictions was also analysed. In addition, the behaviour of the procedure developed and the existing continuous soil moisture accounting procedure used in hydrologic models, in combination with Penman–Monteith and Hargreaves evapotranspiration (ET) methods was also analysed. The new CN methodology, its behaviour and the sensitivity of the depletion coefficient (model parameter) were tested in four United States Geological Survey defined eight‐digit watersheds in different water resources regions of the USA using the SWAT model. In addition to easy parameterization for calibration, the one‐parameter model developed performed adequately in predicting runoff. When tested for shallow soils, the parameter is found to be very sensitive to surface runoff and subsurface flow and less sensitive to ET. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

8.
A cell‐based long‐term hydrological model (CELTHYM) that can be integrated with a geographical information system (GIS) was developed to predict continuous stream flow from small agricultural watersheds. The CELTHYM uses a cell‐by‐cell soil moisture balance approach. For surface runoff estimation, the curve number technique considering soil moisture on a daily basis was used, and release rate was used to estimate baseflow. Evapotranspiration was computed using the FAO modified Penman equation that considered land‐use‐based crop coefficients, soil moisture and the influence of topography on radiation. A rice paddy field water budget model was also adapted for the specific application of the model to East Asia. Model sensitivity analysis was conducted to obtain operational information about the model calibration parameters. The CELTHYM was calibrated and verified with measured runoff data from the WS#1 and WS#3 watersheds of the Seoul National University, Department of Agricultural Engineering, in Hwaseong County, Kyounggi Province, South Korea. The WS#1 watershed is comprised of about 35·4% rice paddy fields and 42·3% forest, whereas the WS#3 watershed is about 85·0% forest and 11·5% rice paddy fields. The CELTHYM was calibrated for the parameter release rate, K, and soil moisture storage coefficient, STC, and results were compared with the measured runoff data for 1986. The validation results for WS#1 considering all daily stream flow were poor with R2, E2 and RMSE having values of 0·40, ?6·63 and 9·69 (mm), respectively, but validation results for days without rainfall were statistically significant (R2 = 0·66). Results for WS#3 showed good agreement with observed data for all days, and R2, E2 and RMSE were 0·92, 0·91 and 2·23 (mm), respectively, suggesting potential for CELTHYM application to other watersheds. The direct runoff and water balance components for watershed WS#1 with significant areas of paddy fields did not perform well, suggesting that additional study of these components is needed. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

9.
Because the traditional Soil Conservation Service curve‐number (SCS‐CN) approach continues to be used ubiquitously in water quality models, new application methods are needed that are consistent with variable source area (VSA) hydrological processes in the landscape. We developed and tested a distributed approach for applying the traditional SCS‐CN equation to watersheds where VSA hydrology is a dominant process. Predicting the location of source areas is important for watershed planning because restricting potentially polluting activities from runoff source areas is fundamental to controlling non‐point‐source pollution. The method presented here used the traditional SCS‐CN approach to predict runoff volume and spatial extent of saturated areas and a topographic index, like that used in TOPMODEL, to distribute runoff source areas through watersheds. The resulting distributed CN–VSA method was applied to two subwatersheds of the Delaware basin in the Catskill Mountains region of New York State and one watershed in south‐eastern Australia to produce runoff‐probability maps. Observed saturated area locations in the watersheds agreed with the distributed CN–VSA method. Results showed good agreement with those obtained from the previously validated soil moisture routing (SMR) model. When compared with the traditional SCS‐CN method, the distributed CN–VSA method predicted a similar total volume of runoff, but vastly different locations of runoff generation. Thus, the distributed CN–VSA approach provides a physically based method that is simple enough to be incorporated into water quality models, and other tools that currently use the traditional SCS–CN method, while still adhering to the principles of VSA hydrology. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

10.
Integrated river basin models should provide a spatially distributed representation of basin hydrology and transport processes to allow for spatially implementing specific management and conservation measures. To accomplish this, the Soil and Water Assessment Tool (SWAT) was modified by integrating a landscape routing model to simulate water flow across discretized routing units. This paper presents a grid‐based version of the SWAT landscape model that has been developed to enhance the spatial representation of hydrology and transport processes. The modified model uses a new flow separation index that considers topographic features and soil properties to capture channel and landscape flow processes related to specific landscape positions. The resulting model is spatially fully distributed and includes surface, lateral and groundwater fluxes in each grid cell of the watershed. Furthermore, it more closely represents the spatially heterogeneous distributed flow and transport processes in a watershed. The model was calibrated and validated for the Little River Watershed (LRW) near Tifton, Georgia (USA). Water balance simulations as well as the spatial distribution of surface runoff, subsurface flow and evapotranspiration are examined. Model results indicate that groundwater flow is the dominant landscape process in the LRW. Results are promising, and satisfactory output was obtained with the presented grid‐based SWAT landscape model. Nash–Sutcliffe model efficiencies for daily stream flow were 0.59 and 0.63 for calibration and validation periods, and the model reasonably simulates the impact of the landscape position on surface runoff, subsurface flow and evapotranspiration. Additional revision of the model will likely be necessary to adequately represent temporal variations of transport and flow processes in a watershed. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

11.
Saturation‐excess runoff is the major runoff mechanism in humid well‐vegetated areas where infiltration rates often exceed rainfall intensity. Although the Soil and Water Assessment Tool (SWAT) is one of the most widely used models, it predicts runoff based mainly on soil and land use characteristics, and is implicitly an infiltration‐excess runoff type of model. Previous attempts to incorporate the saturation‐excess runoff mechanism in SWAT fell short due to the inability to distribute water from one hydrological response unit to another. This paper introduces a modified version of SWAT, referred to as SWAT‐Hillslope (SWAT‐HS). This modification improves the simulation of saturation‐excess runoff by redefining hydrological response units based on wetness classes and by introducing a surface aquifer with the ability to route interflow from “drier” to “wetter” wetness classes. Mathematically, the surface aquifer is a nonlinear reservoir that generates rapid subsurface stormflow as the water table in the surface aquifer rises. The SWAT‐HS model was tested in the Town Brook watershed in the upper reaches of the West Branch Delaware River in the Catskill region of New York, USA. SWAT‐HS predicted discharge well with a Nash‐Sutcliffe Efficiency of 0.68 and 0.87 for daily and monthly time steps. Compared to the original SWAT model, SWAT‐HS predicted less surface runoff and groundwater flow and more lateral flow. The saturated areas predicted by SWAT‐HS were concentrated in locations with a high topographic index and were in agreement with field observations. With the incorporation of topographic characteristics and the addition of the surface aquifer, SWAT‐HS improved streamflow simulation and gave a good representation of saturated areas on the dates that measurements were available. SWAT‐HS is expected to improve water quality model predictions where the location of the surface runoff matters.  相似文献   

12.
Land‐use change is one of the main drivers of watershed hydrology change. The effect of forestry related land‐use changes (e.g. afforestation, deforestation, agroforestry) on water fluxes depends on climate, watershed characteristics and spatial scale. The Soil and Water Assessment Tool (SWAT) model was calibrated, validated and used to simulate the impact of agroforestry on the water balance in the Mara River Basin (MRB) in East Africa. Model performance was assessed by Nash–Sutcliffe Efficiency (NSE) and Kling–Gupta Efficiency (KGE). The NSE (and KGE) values for calibration and validation were: 0.77 (0.88) and 0.74 (0.85) for the Nyangores sub‐watershed, and 0.78 (0.89) and 0.79 (0.63) for the entire MRB. It was found that agroforestry in the watershed would generally reduce surface runoff, mainly because of enhanced infiltration. However, it would also increase evapotranspiration and consequently reduce baseflow and overall water yield, which was attributed to increased water use by trees. Spatial scale was found to have a significant effect on water balance; the impact of agroforestry was higher at the smaller headwater catchment (Nyangores) than for the larger watershed (entire MRB). However, the rate of change in water yield with an increase in area under agroforestry was different for the two and could be attributed to the spatial variability of climate within the MRB. Our results suggest that direct extrapolation of the findings from a small sub‐catchment to a larger watershed may not always be accurate. These findings could guide watershed managers on the level of trade‐offs that might occur between reduced water yields and other benefits (e.g. soil erosion control, improved soil productivity) offered by agroforestry. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

13.
Many water quality models use some form of the curve number (CN) equation developed by the Soil Conservation Service (SCS; U.S. Depart of Agriculture) to predict storm runoff from watersheds based on an infiltration-excess response to rainfall. However, in humid, well-vegetated areas with shallow soils, such as in the northeastern USA, the predominant runoff generating mechanism is saturation-excess on variable source areas (VSAs). We reconceptualized the SCS–CN equation for VSAs, and incorporated it into the General Watershed Loading Function (GWLF) model. The new version of GWLF, named the Variable Source Loading Function (VSLF) model, simulates the watershed runoff response to rainfall using the standard SCS–CN equation, but spatially distributes the runoff response according to a soil wetness index. We spatially validated VSLF runoff predictions and compared VSLF to GWLF for a subwatershed of the New York City Water Supply System. The spatial distribution of runoff from VSLF is more physically realistic than the estimates from GWLF. This has important consequences for water quality modeling, and for the use of models to evaluate and guide watershed management, because correctly predicting the coincidence of runoff generation and pollutant sources is critical to simulating non-point source (NPS) pollution transported by runoff. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

14.
Grazing is common in the foothills fescue grasslands and may influence the seasonal soil‐water patterns, which in turn determine range productivity. Hydrological modelling using the soil and water assessment tool (SWAT) is becoming widely adopted throughout North America especially for simulation of stream flow and runoff in small and large basins. Although applications of the SWAT model have been wide, little attention has been paid to the model's ability to simulate soil‐water patterns in small watersheds. Thus a daily profile of soil water was simulated with SWAT using data collected from the Stavely Range Sub‐station in the foothills of south‐western Alberta, Canada. Three small watersheds were established using a combination of natural and artificial barriers in 1996–97. The watersheds were subjected to no grazing (control), heavy grazing (2·4 animal unit months (AUM) per hectare) or very heavy grazing (4·8 AUM ha?1). Soil‐water measurements were conducted at four slope positions within each watershed (upper, middle, lower and 5 m close to the collector drain), every 2 weeks annually from 1998 to 2000 using a downhole CPN 503 neutron moisture meter. Calibration of the model was conducted using 1998 soil‐water data and resulted in Nash–Sutcliffe coefficient (EF or R2) and regression coefficient of determination (r2) values of 0·77 and 0·85, respectively. Model graphical and statistical evaluation was conducted using the soil‐water data collected in 1999 and 2000. During the evaluation period, soil water was simulated reasonably with an overall EF of 0·70, r2 of 0·72 and a root mean square error (RMSE) of 18·01. The model had a general tendency to overpredict soil water under relatively dry soil conditions, but to underpredict soil water under wet conditions. Sensitivity analysis indicated that absolute relative sensitivity indices of input parameters in soil‐water simulation were in the following order; available water capacity > bulk density > runoff curve number > fraction of field capacity (FFCB) > saturated hydraulic conductivity. Thus these data were critical inputs to ensure reasonable simulation of soil‐water patterns. Overall, the model performed satisfactorily in simulating soil‐water patterns in all three watersheds with a daily time‐step and indicates a great potential for monitoring soil‐water resources in small watersheds. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

15.
Many methods developed for calibration and validation of physically based distributed hydrological models are time consuming and computationally intensive. Only a small set of input parameters can be optimized, and the optimization often results in unrealistic values. In this study we adopted a multi‐variable and multi‐site approach to calibration and validation of the Soil Water Assessment Tool (SWAT) model for the Motueka catchment, making use of extensive field measurements. Not only were a number of hydrological processes (model components) in a catchment evaluated, but also a number of subcatchments were used in the calibration. The internal variables used were PET, annual water yield, daily streamflow, baseflow, and soil moisture. The study was conducted using an 11‐year historical flow record (1990–2000); 1990–94 was used for calibration and 1995–2000 for validation. SWAT generally predicted well the PET, water yield and daily streamflow. The predicted daily streamflow matched the observed values, with a Nash–Sutcliffe coefficient of 0·78 during calibration and 0·72 during validation. However, values for subcatchments ranged from 0·31 to 0·67 during calibration, and 0·36 to 0·52 during validation. The predicted soil moisture remained wet compared with the measurement. About 50% of the extra soil water storage predicted by the model can be ascribed to overprediction of precipitation; the remaining 50% discrepancy was likely to be a result of poor representation of soil properties. Hydrological compensations in the modelling results are derived from water balances in the various pathways and storage (evaporation, streamflow, surface runoff, soil moisture and groundwater) and the contributions to streamflow from different geographic areas (hill slopes, variable source areas, sub‐basins, and subcatchments). The use of an integrated multi‐variable and multi‐site method improved the model calibration and validation and highlighted the areas and hydrological processes requiring greater calibration effort. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

16.
Simulation of watershed scale hydrologic and water quality processes is important for watershed assessments. Proper characterization of the accuracy of these simulations, particularly in cases with limited observed data, is critical. The Soil & Water Assessment Tool (SWAT) is frequently used for watershed scale simulation. The accuracy of the model was assessed by extrapolating calibration results from a well studied Coastal Plain watershed in Southwest Georgia, USA, to watersheds within the same geographic region without further calibration. SWAT was calibrated and validated on a 16.7‐km2 subwatershed within the Little River Experimental Watershed by varying six model parameters. The optimized parameter set was then applied to a watershed of similar land use and soils, a smaller watershed with different land use and soils and three larger watersheds within the same drainage system without further calibration. Simulation results with percent bias (PB) ±15% ≤ PB < ±25% and Nash–Sutcliffe efficiency (NSE) 0.50 < NSE ≤ 0.65 were considered to be satisfactory, whereas those with PB < ±10% and 0.75 < NSE ≤ 1.00 were considered very good. With these criteria, simulation results for the five non‐calibration watersheds were satisfactory to very good. Differences across watersheds were attributed to differences in soils, land use, and surficial aquifer characteristics. These results indicate that SWAT can be a useful tool for predicting streamflow for ungauged watersheds with similar physical characteristics to the calibration watershed studied here and provide an indication of the accuracy of hydrologic simulations for ungauged watersheds. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

17.
Two hydrological models with different structures and spatial capabilities are selected to simulate the runoff and actual evapotranspiration (AET) in Yingluoxia watershed, the upper reaches of Heihe River basin in northwest of China, to validate their performances in simulating hydrological processes. They are calibrated against the observed runoff at the watershed outlet (Yingluoxia station) for the period from 1990 to 1996 and validated for the period from 1997 to 2000. Results show that in terms of the simulated hydrograph against observations and the two selected objective functions, the conceptual, lumped Water And Snow balance MODeling system (WASMOD) with simple model structure could give the same, even better results than the semi‐distributed Soil and Water Assessment Tool (SWAT) with complex structure. Compared with other model applications to the watershed, simulation for monthly runoff made in this study seems better. With regard to AET, results calculated from both models are comparable as well. Both WASMOD and SWAT are proved to be suitable and satisfactory tools in simulating hydrological processes in the study area, although both of them have strengths and limitations in applications. WASMOD model may be one of the promising alternatives in hydrological modelling. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

18.
The Soil and Water Assessment Tool (SWAT) is a physically‐based hydrologic model developed for agricultural watersheds, which has been infrequently validated for forested watersheds, particularly those with deep overwinter snow accumulation and abundant lakes and wetlands. The goal of this study was to determine the applicability of SWAT for modelling streamflow in two watersheds of the Ontonagon River basin of northern Michigan which differ in proportion of wetland and lake area. The forest‐dominated East Branch watershed contains 17% wetland and lake area, whereas the wetland/lake‐dominated Middle Branch watershed contains 26% wetland and lake area. The specific objectives were to: (1) calibrate and validate SWAT models for the East Branch and Middle Branch watersheds to simulate monthly stream flow, and (2) compare the effects of wetland and lake abundance on the magnitude and timing of streamflow. Model calibration and validation was satisfactory, as determined by deviation of discharge D and Nash and Sutcliffe coefficient values E that compared simulated monthly mean discharge versus measured monthly mean discharge. Streamflow simulation discrepancies occurred during summer and fall months and dry years. Several snow melting parameters were found to be critical for the SWAT simulation: TIMP (snow temperature lag factor) and SMFMX and SMFMN (melting factors). Snow melting parameters were not transferable between adjacent watersheds. Differences in seasonal pattern of long‐term monthly streamflow were found, with the forest‐dominated watershed having a higher peak flow during April but a lower flow during the remainder of the year in comparison to the wetland and lake‐dominated watershed. The results suggested that a greater proportion of wetland and lake area increases the capacity of a watershed to impound surface runoff and to delay storm and snow melting events. Representation of wetlands and lakes in a watershed model is required to simulate monthly stream flow in a wetland/lake‐dominated watershed. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

19.
In the Soil Conservation Service Curve Number (SCS‐CN) method, the three levels of antecedent moisture condition (AMC) permit unreasonable sudden jumps in curve numbers, which result into corresponding jumps in the estimated runoff. A few recently developed SCS‐CN‐based models obviate this problem, yet they have several limitations. In this study, such a model incorporating a continuous function for antecedent moisture has been presented. It has several advantages over the other existing SCS‐CN‐based models. Its application to a large dataset from US watersheds showed to perform better than the existing SCS‐CN method and the others based on it. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

20.
Z. X. Xu  J. P. Pang  C. M. Liu  J. Y. Li 《水文研究》2009,23(25):3619-3630
The Soil and Water Assessment Tool (SWAT) was used to simulate the transport of runoff and sediment into the Miyun Reservoir, Beijing in this study. The main objective was to validate the performance of SWAT and the feasibility of using this model as a simulator of runoff and sediment transport processes at a catchment scale in arid and semi‐arid area in North China, and related processes affecting water quantity and soil erosion in the catchment were simulated. The investigation was conducted using a 6‐year historical streamflow and sediment record from 1986 to 1991; the data from 1986 to 1988 was used for calibration and that from 1989 to 1991 for validation. The SWAT generally performs well and could accurately simulate both daily and monthly runoff and sediment yield. The simulated daily and monthly runoff matched the observed values satisfactorily, with a Nash‐Sutcliffe coefficient of greater than 0·6, 0·9 and a coefficient of determination 0·75, 0·9 at two outlet stations (Xiahui and Zhangjiafen stations) during calibration. These values were 0·6, 0·85 and 0·6, 0·9 during validation. For sediment simulation, the efficiency is lower than that for runoff. Even so, the Nash‐Sutcliffe coefficient and coefficient of determination were greater than 0·48 and 0·6 for monthly sediment yield during calibration, and these values were greater than 0·84 and 0·95 during validation. Sensitivity analysis shows that sensitive parameters for the simulation of discharge and sediment yield include curve number, base flow alpha factor, soil evaporation compensation factor, soil available water capacity, soil profile depth, surface flow lag time and channel re‐entrained linear parameter, etc. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号