共查询到20条相似文献，搜索用时 453 毫秒
1.
Analytical elasticity solutions provide an efficient means of performing a first approximate analysis in foundation engineering. One of the well-known solutions is Mindlin’s solution to the stress and displacement induced by a point load at an embedment depth in a half-space. This solution is more superior but less widely used than Boussinesq’s solution. To promote this situation, Mindlin’s displacement equations are integrated to obtain a complete set of explicit formulae for calculating the displacements at an arbitrary point. The displacements are induced by uniformly and triangularly distributed horizontal or vertical pressures, which are exerted over a horizontal or vertical rectangular area in the interior of a homogeneous, isotropic, elastic half-space. These formulae facilitate the future development of computer programs for the analysis of related practical problems in foundation engineering. 相似文献
2.
In many areas of engineering practice, applied loads are not uniformly distributed but often concentrated towards the centre of a foundation. Thus, loads are more realistically depicted as distributed as linearly varying or as parabola of revolution. Solutions for stresses in a transversely isotropic half‐space caused by concave and convex parabolic loads that act on a rectangle have not been derived. This work proposes analytical solutions for stresses in a transversely isotropic half‐space, induced by three‐dimensional, buried, linearly varying/uniform/parabolic rectangular loads. Load types include an upwardly and a downwardly linearly varying load, a uniform load, a concave and a convex parabolic load, all distributed over a rectangular area. These solutions are obtained by integrating the point load solutions in a Cartesian co‐ordinate system for a transversely isotropic half‐space. The buried depth, the dimensions of the loaded area, the type and degree of material anisotropy and the loading type for transversely isotropic half‐spaces influence the proposed solutions. An illustrative example is presented to elucidate the effect of the dimensions of the loaded area, the type and degree of rock anisotropy, and the type of loading on the vertical stress in the isotropic/transversely isotropic rocks subjected to a linearly varying/uniform/parabolic rectangular load. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
3.
In practical engineering, an applied rectangular area load is not often horizontally or vertically distributed but is frequently inclined at a certain angle with respect to the horizontal and vertical axes. Thus, the solutions of displacements and stresses due to such a load are essential to the design of foundations. This article yields the analytical solutions of displacements and stresses subjected to a uniform rectangular load that inclines with respect to the horizontal and vertical axes, resting on the surface of a cross‐anisotropic geomaterial. The planes of cross‐anisotropy are assumed to be parallel to the horizontal ground surface. The procedures to derive the solutions can be integrated the modified point load solutions, which are represented by several displacement and stresses elementary functions. Then, upon integrations, the displacement and stress integral functions resulting from a uniform inclined rectangular load for (1) the displacements at any depth, (2) the surface displacements, (3) the average displacements in a given layer, (4) the stresses at any depth, and (5) the average stresses in a given layer are yielded. The proposed solutions are clear and concise, and they can be employed to construct a series of calculation charts. In addition, the present solutions clarify the load inclinations, the dimensions of a loaded rectangle, and the analyzed depths, and the type and degree of geomaterial anisotropy profoundly affect the displacements and stresses in a cross‐anisotropic medium. Parametric results show that the load inclination factor should be considered when an inclined rectangular load uniformly distributed on the cross‐anisotropic material. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
4.
利用复变函数法和Green函数法给出了SH波对垂直界面附近椭圆形夹杂散射问题的解析解答。首先,将待求的半空间模型沿垂直边界分割为区域Ⅰ和区域Ⅱ两个直角域。通过保角映射的方法将区域Ⅰ内椭圆形夹杂的外域映射为单位圆外域,并利用镜像方法构造出两个区域内满足直角域边界条件的散射波场及适用的Green函数;其次,利用界面契合思想,通过在界面处添加附加力系的方法建立起满足界面处位移和应力连续条件的无穷代数方程组,并截断有限项求解;最后,给出了求解地表位移幅值的具体算例。结果表明,入射波数、入射角度、夹杂位置、垂直界面以及材料参数都对地表位移幅值的分布有影响。 相似文献
5.
Mete Oner 《国际地质力学数值与分析法杂志》1990,14(9):613-629
Vertical and horizontal deformations of surface footings have been studied for an inhomogeneous elastic half-space in which the shear modulus increases with an arbitrary power of depth, n, and Poisson's ratio is constant. A general solution for displacements has been obtained first for point loads applied in vertical and horizontal directions. These are then used in obtaining closed-form solutions for displacements of uniformly loaded circular and rectangular footings. Finally, a numerical method is described that can be used to analyse a rigid footing of an arbitrary shape, and results for rigid rectangular footings are given. 相似文献
6.
Egor V. Dontsov 《国际地质力学数值与分析法杂志》2019,43(2):519-529
This study investigates parametric space of solutions for a planar hydraulic fracture propagating in a homogeneous anisotropic rock. It is assumed that the fracture has an elliptical shape and is driven by a power-law fluid. The purpose of this study is to investigate the influence of anisotropy and power-law fluid rheology on the parametric space of solutions. Rock anisotropy is represented by having two values of fracture toughness, one in the vertical direction and another one in the horizontal direction. Similarly, the effect of elastic anisotropy is approximated by using two different effective elastic moduli in the vertical and horizontal directions. In contrast to the isotropic case, for which there are four limiting solutions, the problem for anisotropic rocks features six different limiting cases. These cases represent competition between toughness and viscosity in the vertical and horizontal directions and competition between fluid storage inside the fracture and fluid leak-off into formation. Approximate expressions for the limiting solutions are obtained using global volume balance and tip asymptotic solutions. Despite the developed solutions rely on a series of approximations, they precisely capture all the scaling laws associated with the problem. Zones of applicability of these limiting solutions are calculated, and their dependence on the problem parameters is investigated. 相似文献
7.
An extensive examination of the discontinuous deformation analysis (DDA) in block dynamic sliding modeling is carried out in this paper. Theoretical solutions for a single block sliding on an arbitrarily inclined plane by applying the horizontal/vertical seismic loadings to the sliding block as acceleration time histories or to the base as constraint displacement time histories are derived. As compared with the theoretical solutions, for a single block sliding, the DDA predicts the sliding displacements and block interaction forces accurately under various base incline angles and friction angles under both the harmonic loadings and a real seismic loading. The vertical seismic component may influence the block sliding displacements to different extent, and the DDA can capture these phenomena successfully and give accurate results. For the calculation of the single block relative sliding, both the theoretical and the DDA solutions indicate that applying the seismic accelerations as constraint displacement time histories (derived by integrating the seismic accelerations twice) to the base is equivalent to applying the seismic accelerations as volume forces to the sliding block in the opposite directions. The DDA modeling also demonstrates that this conclusion still stands for the case of multi‐block sliding. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
8.
Hiroyoshi Hirai 《国际地质力学数值与分析法杂志》2008,32(5):523-557
The investigation of equivalent elastic method is made to predict settlements and stresses of multi‐layered grounds and improved grounds. Analytical models to represent the heterogeneous elastic properties of layers in vertical and horizontal directions for multi‐layered grounds and improved grounds are proposed in taking into account the equivalent elastic modulus and the equivalent thickness. By introducing the equivalent thickness derived from Terzaghi's formula of the vertical stress, the equivalent elastic method of using the equivalent elastic modulus and the equivalent thickness is applied to the formulations concerning immediate settlements and vertical stresses in multi‐layered grounds and improved grounds. Comparison is performed between rigorous solutions and simulations for immediate settlements and vertical stresses in multi‐layered grounds and improved grounds. It is found that the proposed method is able to describe properly the characteristics of distributions for settlements and vertical stresses in multi‐layered grounds and improved grounds. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
9.
Morteza Eskandari‐Ghadi Azizollah Ardeshir‐Behrestaghi Ronald Y. S. Pak Mostafa Karimi Masoud Momeni‐Badeleh 《国际地质力学数值与分析法杂志》2013,37(14):2301-2320
An analytical investigation of a half‐space containing transversely isotropic material under forced vertical and horizontal displacements applied on a rectangular rigid foundation is presented in this paper. With the goal of a rigorous solution to the shape‐ and rigidity‐ induced singular mixed boundary value problem, the formulation employs scalar potential representation, the Fourier expansion and the Hankel integral transforms method to obtain the surface arbitrary point‐load solution in cylindrical coordinate system. The obtained Green's functions are rewritten in rectangular coordinate system, allowing the response of the half‐space because of an arbitrary distributed load on a rectangular surface area be given in terms of a double integral. The numerical evaluations of stresses are done with the use of an element, which is singular at the edge and the corner of the rectangle. Upon the imposition of the rigidity displacement boundary condition for a rigid foundation and the use of a set of two‐dimensional adaptive‐gradient elements, which can capture the singular behavior in the contact stress effectively, a set of new numerical results are presented to illustrate the effect of transverse isotropy on the foundation response. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
10.
We rederive and present the complete closed-form solutions of the displacements and stresses subjected to a point load in a transversely isotropic elastic half-space. The half-space is bounded by a horizontal surface, and the plane of transverse isotropy of the medium is parallel to the horizontal surface. The solutions are obtained by superposing the solutions of two infinite spaces, one acting a point load in its interior and the other being free loading. The Fourier and Hankel transforms in a cylindrical co-ordinate system are employed for deriving the analytical solutions. These solutions are identical with the Mindlin and Boussinesq solutions if the half-space is homogeneous, linear elastic, and isotropic. Also, the Lekhnitskii solution for a transversely isotropic half-space subjected to a vertical point load on its horizontal surface is one of these solutions. Furthermore, an illustrative example is given to show the effect of degree of rock anisotropy on the vertical surface displacement and vertical stress that are induced by a single vertical concentrated force acting on the surface. The results indicate that the displacement and stress accounted for rock anisotropy are quite different for the displacement and stress calculated from isotropic solutions. © 1998 John Wiley & Sons, Ltd. 相似文献
11.
12.
Y. K. Chow 《国际地质力学数值与分析法杂志》1987,11(1):1-15
A numerical procedure is described for the analysis of vertical deformation of smooth, rigid foundations of arbitrary shape on homogeneous and layered soil media. The contact area at the interface of the foundation and soil medium is approximated by square subdivisions. The response of the system is then obtained from the superposition of the influence of the individual subdivisions. The flexibility influence coefficients are based on equivalent smooth, rigid circular areas with the same contact area as the square subdivisions. For foundations on a homogeneous, isotropic elastic half-space, the flexibility coefficients are given analytically by the integrated forms of the Boussinesq's solution. For a layered soil medium, the flexibility coefficients are determined from an axisymmetric finite element analysis which is essentially two dimensional. Thus, there is no necessity for a full three-dimensional finite element analysis. Comparison with solutions obtained using the integral transform technique for smooth, rigid rectangular foundations on a homogeneous, isotropic elastic half-space shows good agreement. Parametric solutions are presented for the response of rectangular foundations on some ‘typical’ soil profiles. The use of a simplified method to estimate the settlement of rectangular foundations on a layered soil medium by superposing solutions for homogeneous, elastic strata is discussed. 相似文献
13.
An anisotropic geomechanical model for jointed rock mass is presented. Simultaneously with deriving the orthotropic anisotropy elastic parameters along the positive axis, the equivalent compliance matrix for the deflection axis orthotropic anisotropy was derived through a three-dimensional coordinate transformation. In addition, Singh’s analysis of the stress concentration effects of intermittent joints was adopted, based on two groups of intermittent joints and a set of cross-cutting joints in the jointed rock mass. The stress concentration effects caused by intermittent joints and the coupling effect of cross-cutting joints along the deflection-axis are also considered. The proposed anisotropic mechanics parameters method is applied to determine the deformation parameters of jointed granite at the Taishan Nuclear Power Station. Combined with the deterministic mechanical parameters of rock blocks and joints, the deformation parameters and their variability in jointed rock masses are estimated quantitatively. The computed results show that jointed granite at the Taishan Nuclear Power Station exhibits typical anisotropic mechanical characteristics; the elastic moduli in the two horizontal directions were similar, but the elastic modulus in the vertical direction was much greater. Jointed rock elastic moduli in the two horizontal and vertical directions were respectively about 24% and 37% of the core of rock, showing weakly orthotropic anisotropy; the ratio of elastic moduli in the vertical and horizontal directions was 1.53, clearly indicating the transversely isotropic rock mass mechanical characteristics. The method can be popularized to solve other rock mechanics problems in nuclear power engineering. 相似文献
14.
Analysis of rectangular piles subjected to lateral loads in nonhomogeneous soil using a Winkler model approach 
下载免费PDF全文
下载免费PDF全文 Hiroyoshi Hirai 《国际地质力学数值与分析法杂志》2015,39(9):937-968
An analytical approach using a Winkler model based on two lateral soil displacement components in a three‐dimensional soil is investigated to provide analytical solutions of horizontal response of a rectangular pile subjected to lateral loads in nonhomogeneous soil. The two lateral displacement components of a soil surrounding the rectangular pile are represented by the Fourier series of displacement potential functions in the elastic three‐dimensional analysis. The lateral stiffness coefficient of the rectangular pile shaft in nonhomogeneous soil is derived from the rocking stiffness coefficient taking into account rocking rotation of a rigid pile shaft. The relationship between horizontal displacement, rotation, moment, and shear force for the rectangular pile subjected to horizontal loads in nonhomogeneous soil is obtainable in the form of the recurrence equation. The formulation of lateral displacement and rotation for a rectangular pile subjected to lateral loads on the pile base in nonhomogeneous soil is proposed by taking into account Mindlin's equation and the equivalent thickness for soil layers in the equivalent elastic method. The difference of lateral behavior between square and circular piles subjected to lateral loads is insignificant. The effect of aspect ratio of the rectangular pile on the lateral behavior is great for the lower stiffness ratio between pile and soil and the larger length–equivalent diameter ratio. The effect of the value of Poisson's ratio of soil on lateral stiffness coefficient is relatively small except Poisson's ratio close to 0.5. The comparison of the results calculated by the current method for a rectangular pile subjected to lateral loads in nonhomogeneous soil has shown good agreement with those obtained from the analytical methods and the finite element method. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
15.
Hiroyoshi Hirai 《国际地质力学数值与分析法杂志》2014,38(12):1298-1320
An analytical approach using a Winkler model is investigated to provide analytical solutions of settlement of a rectangular pile subjected to vertical loads in nonhomogeneous soils. For a vertically loaded pile with a rectangular cross section, the settlement influence factor of a normal pile in nonhomogeneous soils is derived from Mindlin's solution for elastic continuum analysis. For short piles with rectangular and circular cross sections, the modified forms of settlement influence factors of normal piles are produced taking into account the load transfer parameter proposed by Randolph for short circular piles. The modulus of subgrade reaction along a rectangular pile in nonhomogeneous soils is expressed by using the settlement influence factor related to Mindlin's solution to combine the elastic continuum approach with the subgrade‐reaction approach. The relationship between settlement and vertical load for a rectangular pile in nonhomogeneous soils is available in the form of the recurrence equation. The formulation of settlement of soils surrounding a rectangular pile subjected to vertical loads in nonhomogeneous soils is proposed by taking into account Mindlin's solution and both the equivalent thickness and the equivalent elastic modulus for layers in the equivalent elastic method. The difference of settlement between square and circular piles is insignificant, and the settlement of a rectangular pile decreases as the aspect ratio of the rectangular pile cross section increases. The comparison of results calculated by the present method for a rectangular pile in nonhomogeneous soils has shown good agreement with those obtained from the analytical methods and the finite element method. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
16.
Gravity-induced stresses in stratified rock masses 总被引：1，自引：1，他引：1
Bernard Amadei Henri S. Swolfs William Z. Savage 《Rock Mechanics and Rock Engineering》1988,21(1):1-20
Summary This paper presents closed-form solutions for the stress field induced by gravity in anisotropic and stratified rock masses. These rocks are assumed to be laterally restrained. The rock mass consists of finite mechanical units, each unit being modeled as a homogeneous, transversely isotropic or isotropic linearly elastic material. The following results are found. The nature of the gravity induced stress field in a stratified rock mass depends on the elastic properties of each rock unit and how these properties vary with depth. It is thermodynamically admissible for the induced horizontal stress component in a given stratified rock mass to exceed the vertical stress component in certain units and to be smaller in other units; this is not possible for the classical unstratified isotropic solution. Examples are presented to explore the nature of the gravity induced stress field in stratified rock masses. It is found that a decrease in rock mass anisotropy and a stiffening of rock masses with depth can generate stress distributions comparable to empirical hyperbolic distributions previously proposed in the literature. 相似文献
17.
Geocell reinforcement has been increasingly applied to road embankment engineering. Deformation calculation is one of the major concerns during the design process. In this paper, the power-series method was employed to investigate the performance of a geocell-reinforced mattress under symmetric loads. The geocell-reinforced mattress was idealized as a beam on a Winkler foundation. In the analysis, the soil–foundation beam interface resistance, related to the horizontal deformation coupling with the vertical deformation, was considered. Semi-analytic solutions were developed to assess the deformations and internal forces of the foundation beam and verified against an existing finite element method [9]. The results of the proposed method were close to the results from the finite element method. Moreover, the effects of various factors, such as height of embankment, horizontal and vertical foundation coefficients, composite elastic modulus and height of geocell-reinforced mattress, on the foundation beam settlement and the tension force within the beam are discussed. It was found that the interface resistance related to the horizontal deformation of the beam has a reduction effect on the embankment settlement, and it is beneficial to reduce the embankment settlement by increasing the beam rigidity and strengthening the subgrade soil body. 相似文献
18.
The dynamic response of an end bearing pile embedded in a linear visco‐elastic soil layer with hysteretic type damping is theoretically investigated when the pile is subjected to a time‐harmonic vertical loading at the pile top. The soil is modeled as a three‐dimensional axisymmetric continuum in which both its radial and vertical displacements are taken into account. The pile is assumed to be vertical, elastic and of uniform circular cross section. By using two potential functions to decompose the displacements of the soil layer and utilizing the separation of variables technique, the dynamic equilibrium equation is uncoupled and solved. At the interface of soil‐pile system, the boundary conditions of displacement continuity and force equilibrium are invoked to derive a closed‐form solution of the vertical dynamic response of the pile in frequency domain. The corresponding inverted solutions in time domain for the velocity response of a pile subjected to a semi‐sine excitation force applied at the pile top are obtained by means of inverse Fourier transform and the convolution theorem. A comparison with two other simplified solutions has been performed to verify the more rigorous solutions presented in this paper. Using the developed solutions, a parametric study has also been conducted to investigate the influence of the major parameters of the soil‐pile system on the vertical vibration characteristics of the pile. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
19.
In this paper, frequency domain dynamic response of a pile embedded in a half‐space porous medium and subjected to P, SV seismic waves is investigated. According to the fictitious pile methodology, the problem is decomposed into an extended poroelastic half‐space and a fictitious pile. The extended porous half‐space is described by Biot's theory, while the fictitious pile is treated as a bar and a beam and described by the conventional 1‐D structure vibration theory. Using the Hankel transformation method, the fundamental solutions for a half‐space porous medium subjected to a vertical or a horizontal circular patch load are established. Based on the obtained fundamental solutions and free wave fields, the second kind of Fredholm integral equations describing the vertical and the horizontal interaction between the pile and the poroelastic half‐space are established. Solution of the integral equations yields the dynamic response of the pile to plane P, SV waves. Numerical results show the parameters of the porous medium, the pile and incident waves have direct influences on the dynamic response of the pile–half‐space system. Significant differences between conventional single‐phase elastic model and the poroelastic model for the surrounding medium of the pile are found. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
20.
P. L. A. Barros 《国际地质力学数值与分析法杂志》2006,30(7):683-702
A complete formulation and implementation for assessment of the response to dynamic loads of cylindrical rigid structures embedded in transversely isotropic elastic half‐spaces is presented. The analysis is performed in the frequency domain and the steady‐state structure response is obtained. The method is based on a non‐singular version of the indirect boundary element method which uses influence functions, instead of Green's functions, as fundamental solutions. These influence functions are the response of an elastic half‐space to distributed, internally applied loads. The proposed method imposes full bonding contact between the foundation and the surrounding soil. Numerical results for displacement (vertical and horizontal) and rotation (twisting and rocking) impedances, showing the influence of the soil anisotropy, are presented. Results for the soil–structure interface tractions and for the displacement field throughout the half‐space are also shown. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献