共查询到20条相似文献，搜索用时 15 毫秒
1.
Wiam Khebizi Sidali Denine Jean Canou Jean-Claude Dupla 《Geomechanics and Geoengineering》2019,14(1):30-40
Soil improvement using fibres is widely used in soil stabilisation to prevent sand liquefaction. In order to study the undrained behaviour and liquefaction resistance of sand reinforced with polypropylene fibres, a series of triaxial compressive tests were conducted on unreinforced and reinforced Chlef sand with different contents of polypropylene fibres (0, 0.3, 0.5 and 0.8%). Samples were prepared at 30% and 80% relative densities representing loose and dense states respectively, and triaxial tests were performed at confining pressures of 50, 100 and 200 kPa. Tests results show that fibre inclusion has a significant effect on the shear strength and dilation of sandy soil. The increase in strength is function of fibre content, relative density and confining pressure. The maximum strength improvement for both loose and dense fibre-reinforced sand is more pronounced at higher confining pressure and at higher fibre content. 相似文献
2.
A unified constitutive model for unsaturated soils is presented in a critical state framework using the concepts of effective stress and bounding surface plasticity theory. Consideration is given to the effects of unsaturation and particle crushing in the definition of the critical state. A simple isotropic elastic rule is adopted. A loading surface and a bounding surface of the same shape are defined using simple and versatile functions. The bounding surface and elastic rules lead to the existence of a limiting isotropic compression line, towards which the stress trajectories of all isotropic compression load paths approach. A non‐associated flow rule of the same general form is assumed for all soil types. Isotropic hardening/softening occurs due to changes in plastic volumetric strains as well as suction for some unsaturated soils, enabling the phenomenon of volumetric collapse upon wetting to be accounted for. The model is used to simulate the stress–strain behaviour observed in unsaturated speswhite kaolin subjected to three triaxial test load paths. The fit between simulation and experiment is improved compared to that of other constitutive models developed using conventional Cam‐Clay‐based plasticity theory and calibrated using the same set of data. Also, the model is used to simulate to a high degree of accuracy the stress–strain behaviour observed in unsaturated Kurnell sand subjected to two triaxial test load paths and the oedometric compression load path. For oedometric compression theoretical simulations indicate that the suction was not sufficiently large to cause samples to separate from the confining ring. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
3.
This paper discusses the results of an experimental programme designed to investigate the deviatoric behaviour of peats. The results are obtained from triaxial experiments carried out on reconstituted peat samples. The interpretation of the experimental results follows a hierarchical approach in an attempt to derive the ingredients that an elastic–plastic model for peats should contain, including the yield locus, the hardening mechanism and the flow rule. The results obtained from stress tests along different loading directions show that purely volumetric hardening is not adequate to describe the deviatoric response of peat and that a deviatoric strain-dependent component should be included. The plastic deformation mechanism also depends on the previous stress history experienced by the sample. Stress and strain path dependence of the interaction mechanisms between the peat matrix and the fibres is discussed as a possible physical reason for the observed behaviour. This work offers a relevant set of data and information to guide the rational development and the calibration of constitutive laws able to model the deviatoric behaviour of peats.
相似文献4.
A new constitutive model for fibre-reinforced cohesive soil is proposed. The model combines a Cam-Clay like bounding surface model with an elastic–plastic one-dimensional fibrous element model. A “smearing procedure”, which can consider any spatial distribution of fibre orientation, is employed to transform discrete tensile forces developed in the fibres into stresses for the composite material. The fibre stress contribution is bounded by both degradation of soil–fibre bonding due to pull-out mechanism and tensile strength of the fibres. Eventual occurrence of fibre breakage is also considered. The model performances are analysed for both consolidation and shearing loading modes, and qualitative comparison is performed with experimental data available in the literature. For consolidation loading, tensile stresses are not developed in the fibres and thus the fibre effect is rather limited. For drained shear loading, addition of fibres can result in a consistent shear strength increase. The beneficial effect of fibres seems to be controlled by two parameters: the fibre tensile stiffness and the fibre/soil strain ratio that accounts for any possible slippage or shear deformation at the fibre/soil matrix interface. For undrained shear loading, the strengthening effect of the fibres appears to be counteracted by the increase in pore water pressure, induced by the additional confining contribution of the fibres. In agreement with published experimental data, the model suggests also that the moisture content is a key factor governing fibre effectiveness for undrained shearing. Finally, analysis of the model predicted critical states for fibre-reinforced cohesive soil is provided. 相似文献
5.
We consider discontinuous bifurcations as the indicator of a localized failure for a class of composites that are characterized by elastic fibres reinforcing an elastic–plastic matrix. A macroscopic tangent stiffness tensor for the fibre‐reinforced composite is developed by consistently homogenizing the contribution of fibres in a spherical representative volume element. Analytical solutions are derived for the critical hardening modulus and corresponding bifurcation directions for the case of plane strain loading. Properties of the solutions are further illustrated on the example of the non‐associated Drucker–Prager model at onset of yielding. Results show that presence of fibres decreases the critical hardening modulus, thus inhibiting the onset of strain localization. The rate of decrease in the critical hardening modulus is the highest for pure shear, followed by uniaxial tension, uniaxial compression, biaxial tension and biaxial compression. The main fibre parameters that control the onset of strain localization are their volumetric content and their stiffness modulus whereby very stiff fibres can produce the most significant decrease in the critical hardening modulus, especially for the state of biaxial tension. The critical hardening modulus for the non‐associated Drucker–Prager model exhibits a full range of localization modes including compaction bands, dilation bands, and transition in the form of shear bands regardless of the presence of fibres. Presence of fibres affects bifurcation directions, except in the case when Poisson's ratio of the matrix is equal to 0.25. The results demonstrate stabilizing effects of fibres by which they provide the control against the onset of strain localization. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
6.
A simplified model is presented to predict the strength variations of brittle matrix composites, reinforced by steel fibres, with the variations of fibre parameters—length, diameter and volume fraction. This model predicts that its tensile and flexural strength increase non‐linearly with the fibre volume fraction. It also predicts that similar non‐linear behaviour should be observed with the reduction of the fibre diameter when other parameters are kept constant. The experimental results support both these theoretical predictions. It is also explained why an increase in the fibre length does not always significantly increase the fracture toughness. The objective of this paper is not to explain and understand in great detail the science of all phenomena responsible for the strength increase of fibre reinforced brittle matrix composites, but to provide a simple engineering explanation as to why its strength increases with the fibre addition, and how this increase can be quantitatively related to the variations in fibre parameters—fibre volume fraction, fibre length and diameter. These simplifying steps are needed to provide a tool that the practicing engineers can use to predict the brittle matrix strength variation with the fibre parameters. In the area of geomechanics, the results presented here can be used to assess and predict the behaviour of fibre‐reinforced earth. Copyright © 2000 John Wiley & Sons, Ltd. 相似文献
7.
Microplane damage model for jointed rock masses 总被引：1，自引：0，他引：1
The paper presents a new microplane constitutive model for the inelastic behavior of jointed rock masses that takes into account the mechanical behavior and geometric characteristics of cracks and joints. The basic idea is that the microplane modeling of rock masses under general triaxial loading, including compression, requires the isotropic rock matrix and the joints to be considered as two distinct phases coupled in parallel. A joint continuity factor is defined as a microplane damage variable to represent the stress‐carrying area fraction of the joint phase. Based on the assumption of parallel coupling between the rock joint and the rock matrix, the overall mechanical behavior of the rock is characterized by microplane constitutive laws for the rock matrix and for the rock joints, along with an evolution law for the microplane joint continuity factor. The inelastic response of the rock matrix and the rock joints is controlled on the microplane level by the stress–strain boundaries. Based on the arguments enunciated in developing the new microplane model M7 for concrete, the previously used volumetric–deviatoric splits of the elastic strains and of the tensile boundary are avoided. The boundaries are tensile normal, compressive normal, and shear. The numerical simulations demonstrate satisfactory fits of published triaxial test data on sandstone and on jointed plaster mortar, including quintessential features such as the strain softening and dilatancy under low confining pressure, as well as the brittle–ductile transition under higher confining pressure, and the decrease of jointed rock strength and Young's modulus with an increasing dip angle of the joint. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
8.
针对不同环境条件及工程因素对地表变形影响的不同特点,研究了不同应力状态下土的变形特性,得出其影响地表变形的基本规律。通过典型三轴试验对比分析了变形规律,由试验数据空间反演了各应力路径下的本构模型空间,编制相应的模块嵌入有限元程序,模拟了几种不同路径下地表沉降算例,得到了导致地表变形的几个基本规律：①不同的地表变形问题对应的应力路径千差万别,需要用不同的应力路径条件下的本构模型进行分析;②应力路径的影响是不可忽略的,甚至在诸多因素中起主导作用;③数值建模方法建立起来的模型通过权值系列的不同反映应力路径的影响,能较好应用于此类问题的分析;④CTC与TC路径极限体变相差近20 %;⑤CTC路径的剪缩区范围比CTE路径大,两种路径下剪缩体应变值最大相差近17.3 %;CTE路径较CTC路径的剪胀更为明显,剪胀体应变最大相对差值近98 %。 相似文献
9.
The paper deals with constitutive modelling of contiguous rock located between rock joints. A fully explicit kinematically constrained microplane‐type constitutive model for hardening and softening non‐linear triaxial behaviour of isotropic porous rock is developed. The microplane framework, in which the constitutive relation is expressed in terms of stress and strain vectors rather than tensors, makes it possible to model various microstructural physical mechanisms associated with oriented internal surfaces, such as cracking, slip, friction and splitting of a particular orientation. Formulation of the constitutive relation is facilitated by the fact that it is decoupled from the tensorial invariance restrictions, which are satisfied automatically. In its basic features, the present model is similar to the recently developed microplane model M4 for concrete, but there are significant improvements and modifications. They include a realistic simulation of (1) the effects of pore collapse on the volume changes during triaxial loading and on the reduction of frictional strength, (2) recovery of frictional strength during shearing, and (3) the shear‐enhanced compaction in triaxial tests, manifested by a deviation from the hydrostatic stress–strain curve. The model is calibrated by optimal fitting of extensive triaxial test data for Salem limestone, and good fits are demonstrated. Although these data do not cover the entire range of behaviour, credence in broad capabilities of the model is lend by its similarity to model M4 for concrete—an artificial rock. The model is intended for large explicit finite‐element programs. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
10.
砂土液化是导致重大地震灾害的主要原因之一。本研究探讨了天然纤维加筋砂土在循环荷载作用下的抗液化性能。在不排水条件下,对具有不同纤维含量的加筋砂土试样进行了一系列循环三轴试验,研究了饱和砂土的液化特性以及循环剪应变幅值、纤维含量对饱和砂土抗液化性能的影响。此外,通过模拟已完成的循环三轴试验,建立了二维有限元数值模型,并对具有不同纤维含量的加筋砂土进行了参数标定。研究结果表明:(1)增加循环剪应变幅值将促进超孔压累积,使得滞回曲线斜率和平均有效应力减小速度加快;(2)纤维的存在能够减缓超孔压的累积,随着纤维含量增加,加筋砂土抗液化能力得到明显提高;(3)标定后的本构模型参数能可靠地用于模拟纤维加筋砂土的液化响应。研究结果为饱和砂土抗液化问题与纤维加筋砂土的数值模拟提供了有价值的参考。 相似文献
11.
Based on previous experimental findings and theoretical developments, this paper presents the formulation and numerical algorithms of a novel constitutive model for sand with special considerations for cyclic behaviour and accumulation of large post-liquefaction shear deformation. Appropriate formulation for three volumetric strain components enables the model to accurately predict loading and load reversal behaviour of sand, fully capturing the features of cyclic mobility. Compliance with the volumetric compatibility condition, along with reversible and irreversible dilatancy, allows for physically based simulation of the generation and accumulation of shear strain at zero effective stress after initial liquefaction. A state parameter was incorporated for compatibility with critical state soil mechanics, enabling the unified simulation of sand at various densities and confining pressures with a same set of parameters. The determination methods for the 14 model parameters are outlined in the paper. The model was implemented into the open source finite-element framework OpenSees using a cutting-plane stress integration scheme with substepping. The potentials of the model and its numerical implementation were explored via simulations of classical drained and undrained triaxial experiments, undrained cyclic torsional experiments, and a dynamic centrifuge experiment on a single pile in liquefiable soil. The results showed the model’s great capabilities in simulating small to large deformation in the pre- to post-liquefaction regime of sand. 相似文献
12.
An objective of this paper is to demonstrate that the small strain model developed by the authors can be incorporated into the conventional kinematic hardening plasticity framework to predict pre‐failure defor mations. The constitutive model described in this paper is constituted by three elliptical yield surfaces in triaxial stress space. Two inner surfaces are rotated ellipses of the same shape, representing the boundaries of the linear elastic and small strain regions, while the third surface is the modified Cam clay large‐scale yield surface. Within the linear elastic region, the soil behaviour is elastic with cross‐coupling between the shear and volumetric stress–strain components. Within the small strain region, the soil behaviour is elasto‐plastic, described by the kinematic hardening rule with an infinite number of loading surfaces defined by the incremental energy criterion. Within the large‐scale yield surface, the soil behaviour is elasto‐plastic, described by kinematic and isotropic hardening of the small strain region boundary. Since the yield surfaces have different shapes, the uniqueness of the plastic loading condition imposes a restriction on the ratio between their semi‐diameters. The model requires 12 parameters, which can be determined from a single consolidated undrained triaxial compression test. Copyright © 2000 John Wiley & Sons, Ltd. 相似文献
13.
The aim of the present paper is to numerically analyse the behaviour of frozen sand by using a viscoplastic constitutive model with strain softening. A constitutive model has been developed introducing the stress history tensor which is a functional of the stress history, with respect to a generalized time measure. It is shown that Adachi and Oka's model is applicable to the results of triaxial tests on a frozen Toyoura sand at different strain rates. First, the instability of the model is discussed within the framework of bifurcation theory. The model is then implemented into a FEM code to numerically simulate the behaviour under plane strain conditions. From the numerical results, it is revealed that the formation of shear bands is possible and the characteristics of strain localization, such as shear banding, depend on the strain rates. 相似文献
14.
《Geomechanics and Geoengineering》2013,8(2):77-86
The use of discrete-element modelling (DEM) to simulate the behaviour of a highly idealized bituminous mixture under uniaxial and triaxial compressive creep tests is investigated in this paper. The idealized mixture comprises single-sized spherical particles (sand) mixed with bitumen and was chosen so that the packing characteristics are known and the behaviour of the mixture is dominated by the bitumen. The bitumen is represented as shear and normal (tensile and compressive) contact stiffnesses. Numerical sample preparation procedures for specimens containing spherical particles or clumps have been developed to ensure that the final specimen is isotropic and has the correct volumetric proportions. An elastic contact was used for the compressive normal contact stiffness and a viscoelastic contact was used for shear and tensile normal contact stiffness. Simulation results show that the idealized mixture is found to dilate when the ratio of compressive to tensile contact stiffness increases as a function of loading time. Uniaxial and triaxial viscoelastic simulations have been performed to investigate the effect of stress ratio on dilation and the numerical results have been verified with experimental data. The effects of introducing a proportion of frictional contacts and a more complex particle shape (clump) on dilation have been examined. 相似文献
15.
颗粒破碎是粒状材料在高应力状态下的一种基本现象。为了研究冻结砂土中颗粒破碎对应力应变关系的影响,将冻结砂土视为复合颗粒材料,忽略冰的压融,考虑内摩擦角随应力状态的变化,构建一个适用于冻结砂土的考虑颗粒破碎的非线性本构模型。构建过程分为三步,首先是基于三轴剪切前后颗粒分析对冻结砂土颗粒破碎模式和产生机理进行探讨;其次是基于考虑颗粒破碎的能量平衡方程,对冻土在三轴剪切试验过程中的颗粒破碎耗能进行分析,结果表明颗粒破碎耗能随轴向应变呈双曲线变化趋势;最后应用考虑颗粒破碎的剪胀方程修正沈珠江三参数非线性模型中的体积切线模量νt,得到一个考虑颗粒破碎的非线性本构模型,模型参数可以通过单轴压缩试验和常规三轴试验确定。将原模型和修正后模型的计算结果与控制温度为-6℃,围压为1 MPa、4 MPa、6 MPa、8 MPa和10 MPa时冻结砂土的试验结果进行对比,结果表明该模型能够较好的模拟冻结砂土从低围压到高围压的应变软化特征与剪胀特征。 相似文献
16.
This paper presents a constitutive model for describing the stress-strain response of sands under cyclic loading. The model, formulated using the critical state theory within the bounding surface plasticity framework, is an upgraded version of an existing model developed for monotonic behaviour of cohesionless sands. With modification of the hardening law, plastic volumetric strain increment and unloading plastic modulus, the original model was modified to simulate cyclic loading. The proposed model was validated against triaxial cyclic loading tests for Fuji River sand, Toyoura sand and Nigata sand. Comparison between the measured and predicted results suggests that the proposed modified model can capture the main features of cohesionless sands under drained and undrained cyclic loading. 相似文献
17.
针对相对密度为30 %的福建标准砂,利用土工静力－动力液压－三轴扭转多功能剪切仪,在不同初始固结条件下控制试验过程的平均主应力保持不变,改变中主应力系数和主应力方向,进行了应力控制式单调排水剪切试验,着重探讨中主应力系数和主应力方向对砂土剪切强度的耦合影响。试验结果表明：在相同的试验条件下,中主应力系数对饱和标准砂的应力-应变关系具有影响,但对体变特性的影响并不明显。上述现象同初始固结应力比的大小无关。平均主应力一定,广义剪应力随中主应力系数增大而降低的趋势同时依赖于主应力方向的作用。中主应力系数对内摩擦角的放大效应同样受到主应力方向的影响。基于广义双剪应力准则,引入考虑主应力方向影响程度的权重系数,结合试验结果给出了考虑中主应力系数和主应力方向耦合影响的强度指标表达式。 相似文献
18.
Effects of Previous Deviatoric Strain Histories on the Undrained Behaviour of Hostun RF Loose Sand 总被引：1，自引：0，他引：1
The effects of previous deviatoric strain histories on the undrained behaviour of very loose and saturated Hostun RF clean sand are investigated in this paper. From an initial isotropic stress state in the triaxial plane, strain histories are generated by isotropic consolidation followed by standard drained triaxial preshear or presheared cycle, either in compression or in extension, up to a desired value of axial strain or mobilized stress ratio. Deviatoric strain histories are achieved by having nearly the same void ratio at the beginning of the undrained shearing for all tested samples. Subsequent undrained behaviour in triaxial compression and extension is analyzed in detail. Previous deviatoric strain histories can progressively transform the compressive and unstable behaviour of loose sand into a dilative and stable behaviour of dense-like sand, while being loose. Experiments show a common response induced by recent strain histories in terms of effective stress paths, independently of the axial strain attained during the drained presheared cycle, a unique initial gradient of the effective stress paths, a progressive appearance of dilatancy, an evolution the undrained behaviour and a systematic partial static liquefaction associated with softer behaviour when sheared in the opposite direction of the initial presheared direction. This paper offers a comprehensive understanding of the mechanisms of a specialized induced anisotropy created by simple linear stress paths in the classical triaxial plane. 相似文献
19.
The paper presents a hypoplastic constitutive model for the three-dimensional non-linear stress–strain and dilatant volume change behaviour of sand. The model is developed without recourse to the concept in elastoplasticity theory such as yield surface, plastic potential and decomposition into elastic and plastic parts. Benefited from the non-linear tensorial functions available from the representation theorem the model possesses simple mathematical formulation and contains only four material parameters, which can be easily identified with triaxial compression tests. Comparison of the predictions with the experimental results shows that the model is capable of capturing the salient behaviour of sand under monotonic loading and is applicable to both drained and undrained conditions. 相似文献
20.
Brahim Abdelkader Ahmed Arab Marwan Sadek Isam Shahrour 《Geotechnical and Geological Engineering》2018,36(4):2077-2085
This paper presents the results of triaxial tests conducted for the investigation of the influence of geotextile on both the stress–strain and volumetric change behavior of reinforced sands. Tests were carried out on loose sand. The experimental program includes drained compression tests on samples reinforced with different values of both geotextile layers (1 ≤ Ng ≤ 3) and confining pressure (\(\upsigma_{\text{c}}^{\prime }\)) varying from 50 to 200 kPa. Tests show that the contribution of geotextile is negligible until an axial strain threshold that range between 2.5% for a confining pressure of 50 kPa to lower than 1% for 100 and 200 kPa confining pressure. At higher values of εa, geotextile induces a quasi-linear increase in the stress deviator (q) and volume contraction in the reinforced sand. Tests show a negligible influence of the number of geotextile layers (Ng) on the contribution of geotextile to both stress–strain and volumetric change, when normalized with Ng. Tests also show that the contribution of geotextile to the stress–strain mobilization augments with the increase in the confining pressure, while its contribution to the volume contraction decreases with the increase in the confining pressure. The reinforced soil becomes contracting in the case of 2 and 3 geotextile layers. 相似文献