共查询到20条相似文献，搜索用时 687 毫秒
1.
以往关于冻土屈服特性的研究很少考虑含水量的影响,但实际工程中经常遇到的是变含水量情况,因此本文通过-5.0℃条件下高含冰量冻结砂土的一系列三轴压缩试验,系统地研究了含水量对屈服特性的影响,并且由此建立了带有含水量参数的偏应力-剪应变增量型关系式。试验结果表明：随含水量的变化,应力-应变曲线类型有明显变化,即在不同的含水量区间,含水量对硬化规律有不同的影响特性,因此为了使屈服函数的形式更加简单和提高拟合准确度,对于屈服函数的具体形式应该根据塑性剪应变（硬化参数）和含水量不同区间进行分别确定;当塑性剪应变较小时（0.00%~1.00%）,随含水量的增大,偏应力逐渐增加,而当塑性剪应变较大时（大于1.00%）,随含水量的增大,偏应力有一个先减小后增大的变化过程,并且42.0%可以作为含水量转折点;通过分段硬化原则建立的带有含水量参数的屈服函数与偏应力-剪应变的增量型关系式的模拟值与试验点基本相吻合,这说明得到的屈服函数与偏应力-剪应变的增量型关系式可以用于不同含水量条件下屈服面和偏应力-剪应变曲线的预测。 相似文献
2.
A plastic deviatoric model with hardening is developed on the basis of geomechanical tests performed in the saturated case on low permeable porous material such as argillite. This model is a generalized Mohr–Coulomb plastic criterion combined with a Drucker–Prager plastic potential and the hardening parameter is the plastic distortion. Three different hardening functions have been introduced on the basis of triaxial tests: an increase of friction angle, a decrease of cohesion after a threshold and a contractancy to dilatancy transition for volumetric plastic strain. This plastic model has been adapted to the partially saturated case. The effective stress is expressed thanks to the equivalent interstitial pressure π. Numerical results are presented for the excavation and monotonous ventilation of a deep cylindrical cavity. A first plastification due to excavation is followed by a second one due to desaturation. The extent of the non-saturated zone provokes an extent of a plastic zone in the rock mass. Analysis shows that the origin of the plastification can be found in the deviatoric stresses because mean effective stresses are compressive during drying. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
3.
In this paper, there is presented an elastoplastic constitutive model to predict sandy soils behavior under monotonic and cyclic loadings. This model is based on an existing model (Cambou‐Jafari‐Sidoroff) that takes into account deviatoric and isotropic mechanisms of plasticity. The flow rule used in the deviatoric mechanism is non‐associated and a mixed hardening law controls the evolution of the yield surface. In this research the critical state surface and history surface, which separates the virgin and cyclic states in stress space, are defined. Kinematic hardening modulus and stress–dilatancy law for monotonic and cyclic loadings are effectively modified. With taking hardening modulus as a function of deviatoric and volumetric plastic strain and with defining the history surface and stress reversal, the model has the ability to predict the sandy soils' behavior. All of the model parameters have clear physical meanings and can be determined from usual laboratory tests. In order to validate the model, the results of homogeneous tests on Hostun and Toyoura sands are used. The results of validation show a good capability of the proposed model. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
4.
This paper aims to analyse the anisotropic features of behaviour of Opalinus Clay using the theory of plastic multi-mechanisms. The results of triaxial tests conducted with different load levels and directions showed that the mechanical behaviour of this shale is cross-anisotropic. The stiffer samples are those in which the loading direction is parallel to the bedding plane. This indicates that the preconsolidation stress depends on the orientation of the load with respect to the fabric of Opalinus Clay. It is proposed to interpret the observed cross-anisotropy with an elastoplastic model based on four plastic strain mechanisms that may be successively mobilised depending on the loading direction. The predicted stress–strain responses vary according to the directions of the space as a result of the hardening process, depending on the number of plastic strain mechanisms that have been mobilised. The numerical predictions show overall good agreement with the experimental data in terms of deviatoric stress versus axial strain, demonstrating that multi-mechanism plasticity is a suitable constitutive tool for the interpretation of the mechanical anisotropy of this shale. 相似文献
5.
The constitutive model of sands is proposed to describe the characteristics of plastic behaviour for cyclic loadings. A non-associated flow rule is used and both yield function and plastic potential are generalized forms of the Modified Cam clay model. The hardening parameter is represented by the plastic work related to different portions of volumetric and deviatoric changes. The boundary surface is employed to describe the plastic strain within the yield surface. The directional independency of yield condition in triaxial compression and extension tests is extended to that in general stress states. Several drained and undrained cyclic tests are predicted and the comparison is made with experimental results. The proposed model is capable of representing the monotonic and cyclic behaviours of sands with reasonable accuracy. The simulation is performed for both included and excluded membrane penetration effects and it is suggested that the membrane penetration causes the significant influences on the results of undrained cyclic tests. 相似文献
6.
This paper presents a fabric tensor-based bounding surface model accounting for anisotropic behaviour (e.g. the dependency of peak strength on loading direction and non-coaxial deformation) of granular materials. This model is developed based on a well-calibrated isotropic bounding surface model. The yield surface is modified by incorporating the back stress which is proportional to a contact normal-based fabric tensor for characterising fabric anisotropy. The evolution law of the fabric tensor, which is dependent on both rates of the stress ratio and the plastic strain, rules that the material fabric tends to align with the loading direction and evolves towards a unique critical state fabric tensor under monotonic shearing. The incorporation of the evolution law leads to a rotational hardening of the yield surface. The anisotropic critical state is assumed to be independent of the initial values of void ratio and fabric tensor. The critical state fabric tensor has the same intermediate stress ratio (i.e. b value) and principal directions as the critical state stress tensor. A non-associated flow rule in the deviatoric plane is adopted, which is able to predict the non-coaxial flow naturally. The stress–strain relation and fabric evolution of model predictions show a satisfactory agreement with DEM simulation results under monotonic shearing with different loading directions. The model is also validated by comparing with laboratory test results of Leighton Buzzard sand and Toyoura sand under various loading paths. The comparison results demonstrate encouraging applicability of the model for predicting the anisotropic behaviour of granular materials. 相似文献
7.
This paper extends the bounding surface, generalized plasticity, model of Part I to reproduce the behaviour of sands under both static and transient loading. The essential features of the first model are preserved but the following changes are introduced: - (i) The shape of the yield surface is modified.
- (ii) A non-associative flow rule is introduced.
- (iii) The hardening parameter of the bounding surface includes not only volumetric but also deviatoric plastic strain.
- (iv) Plastic volumetric and deviatoric strains are introduced during unloading.
Each of these modifications can be introduced separately in a hierarchical manner to model in an improved way the behaviour of sands. Good comparison with experimental observations is recorded. The simplicity of the original model is preserved with modifications being introduced progressively to model rising complexity of the phenomena. 相似文献
8.
Material behaviour that exhibits characteristics of creep induced by a spontaneous mineral dissolution enhanced by material damage is studied. It is believed that the characteristic rates of the chemical processes involved determine the time‐rate dependence of the resulting strain. A basic model of a combined chemo‐plastic softening and chemically enhanced deviatoric strain hardening for saturated geomaterials is presented. Chemical softening is postulated to occur as a consequence of the net mass removal resulting from dissolution and precipitation of specific minerals occurring at the damage‐generated inter‐phase interfaces. Closed and open systems are discussed. In the former case, deformation at constant stress results entirely from a local compensation mechanism between the chemical softening and strain hardening. The classical three stages of creep are interpreted in terms of mechanisms of dissolution and precipitation, as well as the variation in the reaction surface areas involved in the mass exchange. In an open system, the above local mechanism is enhanced by the removal of mass via diffusion of species affecting the mass balance. Such a system is addressed via a boundary value problem as shown in an example. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
9.
An experimental study was carried out to investigate the effects of previous deviatoric strain histories on the undrained behaviour of loose and saturated Toyoura sand and compared with known results of Hostun RF sand. From an initial isotropic stress state, recent deviatoric strain histories in the compression side of the triaxial plane were generated by a standard drained presheared cycle up to a specified mobilized stress ratio. Mainly, the fully liquefied, contractive, unstable and softening behaviour of loose sand was progressively transformed into the non-liquefied, dilative, fully stable and hardening behaviour of dense-like sand, while remaining within a narrow range of loose density. The paper validates and extends the current understanding of strain-induced anisotropy of loose sand. New experimental data support the directional dependency of the instability cone on the stress increment direction, suggest the bifurcation characteristics of loose sand and evidence the important role of past deviatoric strain histories. 相似文献
10.
This study is devoted to experimental investigation of effects of pore pressure on plastic deformation and failure of a water-saturated limestone. The experimental study is composed of three different groups of laboratory tests. The basic mechanical behavior of the rock is first characterized by drained triaxial compression tests on water-saturated samples without pore pressure. The results are compared with those obtained in a previous study from triaxial compression tests on saturated samples with a constant pore pressure. In the second group, water injection tests under a confining pressure of 20 MPa and different values of deviatoric stress are realized to study the effect of pore pressure increase. Finally, undrained triaxial compression tests are carried out for investigating the coupling effect of plastic deformation and pore pressure variation. Based on experimental data, the validity of effective stress concept for plastic yielding and failure strength is discussed. 相似文献
11.
This paper presents an elasto‐plastic model for unsaturated compacted soils and experimental results obtained from a series of suction‐controlled triaxial tests on unsaturated compacted clay with different initial densities. The initial density dependency of the compacted soil behaviour is modelled by establishing experimental relationships between the initial density and the corresponding yield stress and thereby between the initial density and the location and slope of normal compression line. The model is generalized to three‐dimensional stress states by assuming that the shapes of the failure surface and the yield surface in the deviatoric plane are given by the extended SMP criterion. A considerable number of the isotropic compression, triaxial compression and extension tests on unsaturated compacted clay with different initial densities were performed using a suction‐controllable triaxial apparatus, to measure the stress–strain–volume change in different stress paths and wetting paths. The model has well‐predicting capabilities to reproduce the mechanical behaviour of specimens compacted under different conditions not only in isotropic compression but also in triaxial compression and triaxial extension. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
12.
The influence of the shape of the plastic potential in the deviatoric plane on plane strain collapse is investigated. The most commonly employed elastic‐perfect plastic models are considered, which adopt well‐known failure criteria for defining the yield and plastic potential surfaces, namely the von Mises, the Drucker–Prager, the Tresca, the Mohr–Coulomb and the Matsuoka–Nakai criteria. Finally, the conclusions are also extended to strain hardening/softening models. For simple constitutive models based on perfect plasticity, it is shown that the value of the Lode's angle at plastic collapse in plane strain conditions strongly depends on the specific failure surface adopted for reproducing the plastic potential surface. If the value of the Lode's angle at yield coincides with the failure value prescribed by the plastic potential, the stress–strain curves exhibit the typical perfect plastic behaviour with yield coinciding with failure, otherwise the stress changes after yield and the stress‐strain curves resemble those of strain hardening/softening models. The infinite strength which is in some situations exhibited by the Drucker–Prager model in plane strain condition is investigated and explained, and it is shown that this can also affect strain hardening/softening models. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
13.
This paper presents a two-surface plasticity model for describing some important features of saturated clay under cyclic loading conditions, such as closed hysteresis loops, cyclic shakedown and degradation, and different stress–strain relations for two-way loading. The model, namely ACC-2-C, is based on the elastoplastic model ACC-2 (an adapted Modified Cam Clay model with two yield surfaces) developed by Hong et al. (Acta Geotech 11(4):871–885, 2015). The small-strain nonlinearity concept is adopted to achieve the nonlinear characteristics of clay during unloading–loading stage. The new hardening law related to accumulated deviatoric plastic strain is proposed for the inner surface to describe the cyclic shakedown and degradation. Following the advantages of the ACC-2 model, the constitutive equations are simply formulated based on the consistency condition for the inner yield surface. The model is conveniently implemented in a finite element code using a stress integration scheme similar to the Modified Cam Clay model. The simulation results are highly consistent with experimental data from drained and undrained isotropic cyclic triaxial tests in normally consolidated saturated clay under both one-way and two-way loadings. 相似文献
15.
The yield vertex non‐coaxial theory is implemented into a critical state soil model, CASM ( Int. J. Numer. Anal. Meth. Geomech. 1998; 22 :621–653) to investigate the non‐coaxial influences on the stress–strain simulations of real soil behaviour in the presence of principal stress rotations. The CASM is a unified clay and sand model, developed based on the soil critical state concept and the state parameter concept. Without loss of simplicity, it is capable of simulating the behaviour of sands and clays within a wide range of densities. The non‐coaxial CASM is employed to simulate the simple shear responses of Erksak sand and Weald clay under different densities and initial stress states. Dependence of the soil behaviour on the Lode angle and different plastic flow rules in the deviatoric plane are also considered in the study of non‐coaxial influences. All the predictions indicate that the use of the non‐coaxial model makes the orientations of the principal stress and the principal strain rate different during the early stage of shearing, and they approach the same ultimate values with an increase in loading. These ultimate orientations are dependent on the density of soils, and independent of their initial stress states. The use of the non‐coaxial model also softens the shear stress evolutions, compared with the coaxial model. It is also found that the ultimate shear strengths by using the coaxial and non‐coaxial models are dependent on the plastic flow rules in the deviatoric plane. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
16.
通过冻结膨胀土三轴力学试验,主要研究了土体在不同温度与围压条件下的应力-应变关系.结果表明：冻结膨胀土的应力-应变曲线为应变硬化型,具有明显的弹塑性变形阶段;在相同围压条件下,随着温度的降低,偏应力增量随应变的增加而增大,最终达到塑性破坏时应力也随之增大. 通过回归分析,抗压强度与温度呈良好的线性关系.随着围压的增加,土体进入塑性变形阶段时的应力有所提高,抗压强度也随之增加,相比温度,围压对抗压强度的影响不是很大.对试验数据进行拟合表明,应用邓肯-张模型能够很好的描述冻结膨胀土应力-应变关系. 相似文献
17.
The mechanical property of frozen saline sandy soil is complicated due to its complex components and sensitivity to salt content and confining pressure. Thus, a series of triaxial compression tests were carried out on sandy samples with different Na2SO4 contents under different confining pressures to explore the effects of particle breakage, pressure melting, shear dilation and strain softening or hardening. The test results indicate that the stress–strain curves exhibit strain softening/hardening phenomena when the confining pressures are below or above 6 MPa, respectively. A shear dilation phenomenon was observed in the loading process. With increasing confining pressure, the strength firstly increases and then decreases. By taking into consideration the changes between the grain size distributions before and after triaxial compression tests, a failure strength line incorporating the influences of both particle breakage and pressure melting is proposed. In order to describe the deformation characteristics of frozen saline sandy soil, an elastoplastic incremental constitutive model is established based on the test results. The proposed model considers the plastic compressive, plastic shear and breakage mechanisms by adopting the non-associated flow rule. The breakage mechanism can be reflected by an index related to the initial, current and ultimate grain size distributions. The hardening parameters corresponding to compressive and shear mechanisms consider the influence of particle breakage. Then the effect of particle breakage on both the stress–strain and volumetric strain curves is analyzed. The calculated results fit well with the test results, indicating that the developed constitutive model can well describe the mechanical and deformation features of frozen saline sandy soil under various stress levels and stress paths. In addition, the strain softening/hardening, contraction, high dilation and particle breakage can be well captured. 相似文献
18.
The present paper deals with the extension of a cap model in order to describe the material behavior of partially saturated soils, in particular, of partially saturated sands and silts. The soil model is formulated in terms of two stress state variables, using net stress and matric suction and, alternatively, the average soil skeleton stress and suction, the latter playing the role of a stress‐like plastic internal variable. The yield surface, consisting of a shear failure surface and a hardening cap surface, the plastic potentials for the non‐associated flow rule and the hardening law for the cap are extended by taking into account the effects of matric suction on the material behavior. Furthermore, the third invariant of the deviatoric stress tensor is taken into account in the formulation of the yield surfaces. The developed model is validated by the numerical simulation of an extensive series of suction controlled tests for a silty sand, which were conducted at different constant values of suction. Although both versions of the soil model yield identical results for stress paths at constant values of matric suction, differences are encountered for stress paths involving wetting. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
19.
为了提出一种适合于岩土地震数值模拟的土体本构模型,基于土体动应力-应变关系的Hardin曲线及其在非等幅往返荷载下的Pyke修正,采用von Mises准则在偏应力平面上构造边界面,以反向加载点和当前应力点的连线在边界面上投影的比例作为硬化参数,推导了塑性硬化模量并给出该边界面本构的具体增量表述。在有限元软件ADINA中通过自定义材料的二次开发实现了该本构模型,并利用动三轴试验对该本构模型进行了验证。数值模拟与试验结果的对比表明,本构模型能如实反映土体的应力-应变关系。针对实际工程场地的地震反应,应用边界面本构模型在ADINA中进行了二维数值模拟,与SHAKE91的计算结果进行了对比,说明了该本构模型应用于岩土地震工程问题的合理性。 相似文献
20.
The unified three-dimensional (3D) critical state bounding-surface plasticity model gUTS enables clays, silts and sands to be treated within a single framework. Furthermore, loose and dense states of a particular soil subjected to a wide range of confinements are viewed as a single material defined by the same set of constants. The model is able to handle both monotonic and complex cyclic paths including those involving a rotation of the principal stress directions. The model incorporates the following features: combined use of radial and deviatoric mapping rules and the use of an apparent normal consolidation line for sands; use of a non-associated flow rule where the ratio of the rates of volumetric plastic strain to deviatoric plastic strain is a function only of the ratio of deviatoric to mean effective stresses and the Lode angle; adoption of a bi-linear critical state line projected onto the plane of the void ratio versus logarithm of mean effective stress; inclusion of a sub-elliptic, or super-elliptic, segment in the plastic dilatancy surface for stress ratios less than critical; use of elliptic segments in the deviatoric planes; movement of the projection centre in the deviatoric mapping region and incorporation of a plastic stiffening effect for cyclic paths which repeatedly load in the same deviatoric direction. 相似文献
|
