首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
The present study proposes land surface temperature (LST) retrieval from satellite-based thermal IR data by single channel radiative transfer algorithm using atmospheric correction parameters derived from satellite-based and in-situ data and land surface emissivity (LSE) derived by a hybrid LSE model. For example, atmospheric transmittance (τ) was derived from Terra MODIS spectral radiance in atmospheric window and absorption bands, whereas the atmospheric path radiance and sky radiance were estimated using satellite- and ground-based in-situ solar radiation, geographic location and observation conditions. The hybrid LSE model which is coupled with ground-based emissivity measurements is more versatile than the previous LSE models and yields improved emissivity values by knowledge-based approach. It uses NDVI-based and NDVI Threshold method (NDVITHM) based algorithms and field-measured emissivity values. The model is applicable for dense vegetation cover, mixed vegetation cover, bare earth including coal mining related land surface classes. The study was conducted in a coalfield of India badly affected by coal fire for decades. In a coal fire affected coalfield, LST would provide precise temperature difference between thermally anomalous coal fire pixels and background pixels to facilitate coal fire detection and monitoring. The derived LST products of the present study were compared with radiant temperature images across some of the prominent coal fire locations in the study area by graphical means and by some standard mathematical dispersion coefficients such as coefficient of variation, coefficient of quartile deviation, coefficient of quartile deviation for 3rd quartile vs. maximum temperature, coefficient of mean deviation (about median) indicating significant increase in the temperature difference among the pixels. The average temperature slope between adjacent pixels, which increases the potential of coal fire pixel detection from background pixels, is significantly larger in the derived LST products than the corresponding radiant temperature images.  相似文献   

2.
Regional scale urban built-up areas and surface urban heat islands (SUHI) are important for urban planning and policy formation. Owing to coarse spatial resolution (1000 m), it is difficult to use Moderate Resolution Imaging Spectroradiometer (MODIS) Land surface temperature (LST) products for mapping urban areas and visualization, and SUHI-related studies. To overcome this problem, the present study downscaled MODIS (1000 m resolution)-derived LST to 250 m resolution to map and visualize the urban areas and identify the basic components of SUHI over 12 districts of Punjab, India. The results are compared through visual interpretation and statistical procedure based on similarity analysis. The increased entropy value in the downscaled LST signifies higher information content. The temperature variation within the built-up and its environs is due to difference in land use and is depicted better in the downscaled LST. The SUHI intensity analysis of four cities (Ludhiana, Patiala, Moga and Vatinda) indicates that mean temperature in urban built-up core is higher (38.87 °C) as compared to suburban (35.85 °C) and rural (32.41 °C) areas. The downscaling techniques demonstrated in this paper enhance the usage of open-source wide swath MODIS LST for continuous monitoring of SUHI and urban area mapping, visualisation and analysis at regional scale. Such initiatives are useful for the scientific community and the decision-makers.  相似文献   

3.
Land surface temperature (LST) shows negative correlation with the Normalized Difference Water Index (NDWI). Variability in the degree of correlation between LST and NDWI is ascribed to the physical character of specific geological material. Northwest India exhibits various landforms with different geological materials and has been broadly classified into four zones. Structural ridges of Aravalli Mountain of different rock compositions show strong variability both in NDWI (range 1.154, SD?=?0.0599) and in LST (range 24 °C and SD?=?2.54). Negative LST–NDWI correlation in this sector is partially linear. Western Thar Desert, having homogenous silica sand of lower emissivity shows least variability in its NDWI (range 0.88, SD?=?0.027) and moderate variability in its LST (20 °C, SD?=?2.389). Strong negative correlation of LST with NDWI is exhibited here. Band ratio Silica map in this sector shows strong positive correlation with LST. The eastern part of the Thar desert with mixed rocky knobs, and wind-blown sand shows low variability in NDWI (range 0.85) as well as LST (range 15 °C). Area in Indus–Bias–Sutlej River basin, dominated with fluvial sediments with lesser amount of windblown sediments, show low variability of NDWI (0.85) and moderate variability of LST (range 23 °C). In the areas, around Luni river higher NDWI trend is recorded, which is unrelated to present drainage trends indicating presence of palaeo-drainage. In addition, high NDWI and high LST bearing linear zones at places are interpreted as structural lineaments/faults based on pattern, moisture content and thermal high.  相似文献   

4.
杨虎  杨忠东 《遥感学报》2006,10(4):600-607
地表温度反演的裂窗算法已成功应用于NOAA系列卫星热红外遥感数据。目前，裂窗算法中应用较为广泛的一种是Becker等人于1990年提出的局地裂窗算法，主要是通过辐射传输模型模拟不同地表条件和大气状况下，地表温度和发射率对红外辐射亮温的影响，从而发展出一个利用AVHRR4，5通道亮温数据反演地表温度的线性模型。在晴空无云和地表比辐射率能精确估算的情况下，Becker算法反演地表温度的精度在1K以内。Becker算法用Lowtran程序模拟计算地表辐射量，且模型中参数主要针对NOAA-9传感器特性得到。本文在Becker算法的基础上，针对NOAA-16／17传感器热红外通道光谱响应函数特性，利用最新的、计算光谱分辨率更高的MODTRAN程序模拟不同大气状况下，不同地表温度和发射率对NOAAAVHRR4，5通道辐射亮温响应特性的影响，改进Becker算法中模型参数，使之能适用于NOAA-16／17热红外数据。同时，本文利用植被指数NDVI，在中国陆地区域lkm分辨率最新地表分类数据的基础上，得到模型中需要的地表比辐射率参数，将改进的模型应用于1km分辨率NOAA17数据，得到了旬合成中国陆地区域范围地表温度，通过地面气象台站实测数据对比验证．取得了较好的结果。  相似文献   

5.
基于ASTER GED产品的地表发射率估算   总被引：1，自引：0，他引：1  
地表发射率是地表温度反演的重要输入参数,为了解决现有地表发射率估算方法在裸露地表精度较差的问题,本文基于最新的ASTER全球地表发射率产品(ASTER GED)和基于植被覆盖度的方法(VCM),提出了一个改进的地表发射率估算方法。首先,利用ASTER GED产品求解裸土发射率,然后,利用ASTER波谱库中的植被发射率和植被覆盖度结合VCM方法计算地表发射率。利用张掖地区2012年11景ASTER TES算法反演的地表发射率产品和实测地表发射率数据进行了验证,同时利用一景Landsat 8 TIRS数据分析了对地表温度反演精度的影响。结果表明该方法估算的地表发射率整体精度较高,可以有效改进裸露地表的发射率估算精度,用于支持利用多种热红外传感器数据生产高精度的地表温度产品。  相似文献   

6.
Main objective of this study was to establish a relationship between land cover and land surface temperature (LST) in urban and rural areas. The research was conducted using Landsat, WorldView-2 (WV-2) and Digital Mapping Camera. Normalised difference vegetation index and normalised difference built-up index were used for establishing the relation between built-up area, vegetation cover and LST for spatial resolution of 30 m. Impervious surface and vegetation area generated from Digital Mapping Camera from Intergraph and WV-2 were used to establish the relation between built-up area, vegetation cover and LST for spatial resolutions of 0.1, 0.5 and 30 m. Linear regression models were used to determine the relationship between LST and indicators. Main contribution of this research is to establish the use of combining remote sensing sensors with different spectral and spatial resolution for two typical settlements in Vojvodina. Correlation coefficients between LST and LST indicators ranged from 0.602 to 0.768.  相似文献   

7.
Cairo region is characterized by a range of physiographic features, including: flat agricultural lands, bare sandy deserts, highlands, calcareous terrains and urban land use. A time series data-set (300 images) acquired from the Moderate Resolution Imaging Spectroradiometer for the period July 2002–June 2015 were utilized to retrieve the spatial variations in the mean land surface temperature (LST) for the above-mentioned surface features. Results showed that vegetation, topography and surface albedo have negative correlations with LST. Vegetation/LST correlation has the maximum regression coefficient (R2 = 0.68) and albedo/LST has the minimum (R2 = 0.03). Cultivated lands reveal the lowest mean LST (<32 °C), whereas industrial lands exhibit the highest LST (>40 °C) of Cairo region. There is a considerable urban heat island formed at Helwan south of Cairo, where heavy industries are settled. Industrial activities raised the mean LST of the region by at least 4 °C than the surrounding urban lands.  相似文献   

8.
This work presents the preliminary results of the first field calibration campaign performed in the Atacama Desert, Chile, between the 18 and 22 August 2014, called the Atacama Field Campaign (ATAFIC 2014). In situ measurements were performed in order to spectrally characterize the surface reflectance spectra between 0.3 and 2.5?µm, radiometric temperature (8.0–14.0?µm) and atmospheric measurements. A soil sample was collected and analyzed using Fourier Transform Infrared Spectroscopy and X-Ray Diffraction techniques to characterize the surface reflectance spectra and mineralogical composition, respectively. ASTER land surface emissivity in addition to GOES, MODIS and Landsat-8 land surface temperature (LST) were also used. Results showed that the spectral features of the Atacama soil and the characteristics of this geographical zone, which is featured as the most hyper-arid and cloudless place in the world, make this area a potential target for surface reflectance characterization. Day and night LST comparison between field and remote sensing data are lower than 2?K and the Root Mean Square Error for land surface emissivity is close to 2%. This work opens the possibilities to consider the Atacama Desert as a reference target for calibration and validation activities for earth observation missions’ purposes.  相似文献   

9.
Land cover changes associated with urbanisation modify microclimate, leading to urban heat islands, whereby cities are warmer than the surrounding countryside. Understanding the factors causing this phenomenon could help urban areas adapt to climate change and improve living conditions of inhabitants. In this study, land surface temperatures (LST) of Aarhus, a city in the high latitudes, are estimated from the reflectance of a thermal band (TIRS1; Band 10; 10.60–11.19 μm) of Landsat 8 on five dates in the summer months (one in 2015, and four in 2018). Spectral indices, modelled on the normalised difference vegetation index (NDVI), using all combinations of the first seven bands of Landsat 8 are calculated and their relationships with LST, analysed. Land cover characteristics, in terms of the percentages of tree cover, building cover and overall vegetation cover are estimated from airborne LiDAR data, building footprints and 4-band aerial imagery, respectively. The correlations between LST, the spectral indices and land cover are estimated.The difference in mean temperature between the rural and urban parts of Aarhus is up to 3.96 °C, while the difference between the warmer and colder zones (based on the mean and SD of LST) is up to 13.26 °C. The spectral index using the near infrared band (NIR; Band 5; 0.85-0.88 μm) and a short-wave infrared band (SWIR2; Band 7; 2.11–2.29 μm) has the strongest correlations (r: 0.62 to 0.89) with LST for the whole study area. This index is the inverse of normalised burn ratio (NBR), which has been used for mapping burnt areas. Spectral indices using different combinations of the infrared bands have stronger correlations with LST than the more widely used vegetation indices such as NDVI. The percentage of tree cover has a higher negative correlation (Pearson’s r: -0.68 to -0.75) with LST than overall vegetation cover (r: -0.45 to -0.63). Tree cover and building cover (r: 0.53 to 0.71) together explain up to 68 % of the variation in LST. Modification of tree and building cover may therefore have the potential to regulate urban LST.  相似文献   

10.
We have delineated different granitoids based on variation in emissivity and relative surface temperature recorded in thermal bands of Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) sensor of EO-1 satellite. In this regard, we have used emissivity normalization algorithm to derive broadband emissivity from thermal bands of ASTER sensor to delineate different lithounits of the granitoid family. We have compared emissivity and radiance image composites in terms of delineation of different granitoids. We have also used false colour composite (FCC) image derived using two emissivity bands and temperature (derived using emissivity normalisation method) bands to delineate different granitoids. We could differentiate different granitoids in the three-dimensional (3D) data space of ASTER-derived emissivity bands (second and third bands) and temperature bands. Based on the analysis of 3D scatter plot, we also proposed a ternary diagram of emissivity and temperature, which can be used to delineate different granitoids.  相似文献   

11.
Radiometric correction is an important issue in the quantitative remote-sensing community. By integrating dark object subtraction (DOS)-based atmospheric correction with physics-based topographic correction, a coupled land surface reflectance retrieval algorithm (coupled atmospheric and topographic correction algorithm, named the CAT algorithm) for rugged mountainous regions is proposed. Terra MODIS-derived atmospheric characterization data (including aerosol optical depth, integrated precipitable water, surface pressure, and ozone concentration) are employed as inputs for the proposed algorithm. A physics-based path radiance estimation model is proposed and embedded in the CAT algorithm, and band-specific per-pixel path radiance values are calculated. After the CAT algorithm was performed, the correlation between reflectance and terrain was dramatically reduced, with correlation coefficients nearly equal zero, especially for the near infrared and short-wave infrared bands, meanwhile the image information content increased over 20%. To provide a comparison with previous studies, two commonly used methods in the literature (DOS + Cosine and DOS + C) were employed. The results of the comparison show that the proposed algorithm performed better in both atmospheric and topographic corrections without empirical regression.  相似文献   

12.
首先在地表比辐射率为已知的条件下,提出一个非线性迭代温度反演模型,我们对不同的地表和大气条件进行了模拟计算,结果表明当大气温度廓线误差－２Ｋ－２Ｋ,水汽廓线误差±２０％时的温度均方根误差为０．４８Ｋ。当大气模式误差一个模式时反演的温度均方根误差为０．８５Ｋ。在此基础上,引人相邻像元的概念,相邻像元的大气状况可以认为是相同的,应用两个时相的遥感影像数据,假定在两个相近时相之间地表比辐射率值不变,建立地表比辐射率与温度的反演模型。我们对不同的地表和大气条件进行了模拟计算,结果表明当大气温度廓线误差－２Ｋ－２Ｋ,水汽廓线误差±２０％时地表温度均方根误差小于１．５Ｋ,地表比辐射率均方根误差小于０．０２,地表辐射均方根误差为１％;当大气温度廓线误差－２Ｋ－２Ｋ,水汽廓线误差±１０％时,地表温度均方根误差小于１．０Ｋ,地表辐射均方根误差小于０．６％。  相似文献   

13.
基于ASTER数据的城市热环境遥感监测研究   总被引：1，自引：0，他引：1  
以ASTER数据为数据源,采用同一颗卫星上的MODIS数据得到大气透过率;利用可见光和近红外波段对下垫面类型进行分类和利用JPL(Jet Propulsion Lab)提供的光谱库计算地表比辐射率,进而采用劈窗算法进行地表温度(Land Surface Temperature,LST)的反演。在此基础上,利用反演的LST、分类结果和归一化差值植被指数(NDVI),对沧州地区的城市热环境进行了定量分析,研究结果可为进一步深入探讨城市热岛的发生发展规律以及城市热环境的模拟调控、优化布局提供一定的科学依据。  相似文献   

14.
Thermal infrared (TIR) remote sensing is an important technique in the exploration of geothermal resources. In this study, a geothermal survey is conducted in Tengchong area of Yunnan province in China using TIR data from Landsat-7 Enhanced Thematic Mapper Plus (ETM+) sensor. Based on radiometric calibration, atmospheric correction and emissivity calculation, a simple but efficient single channel algorithm with acceptable precision is applied to retrieve the land surface temperature (LST) of study area. The LST anomalous areas with temperature about 4–10 K higher than background area are discovered. Four geothermal areas are identified with the discussion of geothermal mechanism and the further analysis of regional geologic structure. The research reveals that the distribution of geothermal areas is consistent with the fault development in study area. Magmatism contributes abundant thermal source to study area and the faults provide thermal channels for heat transfer from interior earth to land surface and facilitate the present of geothermal anomalies. Finally, we conclude that TIR remote sensing is a cost-effective technique to detect LST anomalies. Combining TIR remote sensing with geological analysis and the understanding of geothermal mechanism is an accurate and efficient approach to geothermal area detection.  相似文献   

15.
The analysis of the passive microwave radiance transfer equation certifies that there is a linear relationship between satellite-generated brightness temperatures (BT) and in situ observation temperature and that land surface temperature (LST) is largely influenced by vegetation cover conditions. Microwave polarization difference index (MPDI) is an effective indicator for characterizing the land surface vegetation cover density. Based on the analysis of LST models from AMSR-E BT with 6.9 GHz MPDI intervals at 0.04, 0.02 and 0.01, respectively, this paper developed a simplified LST regression model with MPDI-based five land cover types, combining observation temperatures from 86 meteorological observation stations. The study shows that smaller MPDI intervals can obtain higher accuracy of AMSR-E LST simulation, and that the combination of HDF Explorer and ArcGIS software was useful for automatically processing the pixel latitude, longitude and BT information from the AMSR-E HDF imagery files. The RMSE of the five LST simulation algorithms is between 1.47 and 1.92 °C, with an average LST retrieval error of 0.91–1.30 °C. Besides, only 7 polarization bands and 5 land surface types are required by the proposed simplified model. The new LST simulation models appears to be more effective for producing LST compared to past most studies, of which the accuracy used to be more than 2 °C. This study is one of the rare applications that combine the meteorological observation temperature with MPDI to produce the LST regression analysis algorithms with less RMSE from AMSR-E data. The results can be referred to similar areas of the world for LST retrieval or land surface process research, in particular under extreme bad weather conditions.  相似文献   

16.
Our study examines the relationships among various environmental variables in Surat city using remote sensing. Landsat Thematic Mapper satellite data were used in conjugation with geospatial techniques to study urbanization and correlation among satellite-derived biophysical parameters namely, normalized difference vegetation index (NDVI), normalized difference built-up index (NDBI), normalized difference water index (NDWI), normalized difference bareness index (NDBaI) and land surface temperature (LST). A modified NDWI (MNDWI) was used for extracting areas under water. Land use/land cover classification was performed using hierarchical decision tree classification technique using ERDAS IMAGINE Expert classifier with an accuracy of 90.4% for 1990 and 85% for 2009. It was found that city has expanded over 42.75 sq.km within two decades. Built-up, fallow and sediment land use classes exhibited high dynamics with increase of nearly 200% and 50% and decrease of 55% respectively from 1990 to 2009. Vegetation and water classes were less dynamic with 20% decrease and 15% increase. The transformation of land parcels from vegetation to built-up, vegetation to fallow and fallow to built-up has resulted in increase of LST by 5.5 ± 2.6°C, 6.7 ± 3°C and 3.5 ± 2.9°C, respectively.  相似文献   

17.
Land surface temperature (LST) of Beijing area was retrieved from Landsat TM thermal band data utilizing a radiative transfer equation and the urban heat island (HUI) effects of Beijing and its relationship with land cover and normalized difference vegetation index (NDVI) were discussed. The result of LST showed that the urban LST was evidently higher than the suburban one. The average urban LST was found to 4. 5°C and 9°C higher than the suburban and outer suburban temperature, respectively, which demonstrated the prominent UHI effects in Beijing. Prominent negative correlation between LST and NDVI was found in the urban area, which suggested the low percent vegetation cover in the urban area was the main cause of the urban heat island.  相似文献   

18.
Land surface temperature (LST) is an important aspect in global to regional change studies, for control of climate change and balancing of high temperature. Urbanization is one of the influencing factors increasing land surface and atmospheric temperature, by the emission of greenhouse gases (e.g. CO2, NO and methane). In the present study, LST was derived from Landsat-8 of multitemporal data sets to analyse the spatial structure of the urban thermal environment in relation to the urban surface characteristics and land use–land cover (LULC). LST is influenced by the greenhouse gases i.e. CO2 plays an important role in increasing the earth’s surface temperature. In order to provide the evidence of influence of CO2 on LST, the relationship between LST, air temperature and CO2 was analysed. Landsat-8 satellite has two thermal bands, 10 and 11. These bands were used to accurately to calculate the temperature over the study area. Results showed that the strength of correlation between ground monitoring data and satellite data was high. Based on correlation values of each month April (R2 = 0.994), May (R2 = 0.297) and June (R2 = 0.934), observed results show that band 10 was significantly correlating with air temperature. Relationship between LST and CO2 levels were obtained from linear regression analysis. band 11 was correlating significantly with CO2 values in each of the months April (R2 = 0.217), May (R2 = 0.914) and June, (R2 = 0.934), because band 11 is closer to the 15-micron band of CO2. From the results, it was observed that band 10 can be used for calculating air temperature and band 11 can be used for estimation of greenhouse gases.  相似文献   

19.
以Landsat 8为数据源,并结合地表发射率、大气透过率等参数遥感估算方法,提出了针对TIRS 10数据的单窗算法TIRS10_SC,并开展了研究区的地表温度反演3种单窗算法的对比研究。结果表明,TIRS10_SC算法紧密结合Landsat8 TIRS传感器的特性,通过遥感估算城区下垫面的地表发射率、大气透过率等特征,可以较为准确地估算出地表不同覆被类型的温度;裸土与水泥下垫面等相对均质的下垫面的温度反演效果稍好,TIRS10_SC算法和Q_SC算法其平均误差为0.60℃,JM_SC算法其平均误差为1.01℃;对于植被下垫面,TIRS10_SC算法和Q_SC算法其平均误差为1.48℃,JM_SC算法其平均误差为1.26℃,为了提升城区植被下垫面温度反演精度,应该进一步准确地量化其发射率特性。  相似文献   

20.
本文利用对地观测卫星多传感器的特点，提出了针对ASTER数据同时反演地表温度和比辐射率的多通道算法。即利用ASTER数据的第11，12，13，14热红外波段建立热辐射传输方程，并通过对于地表比辐射率分析可知，ASTER4个热红外波段的比辐射率可以用近似线性方程表示，得到了6个方程6个未知数，从而形成了针对ASTER数据的同时反演地表温度和比辐射率的多通道算法。对于关键参数大气透过率，则是通过同一颗星的MODIS传感器的3个近红外波段反演大气水汽含量，然后用MODTRAN模拟大气水汽含量与ASTER热红外波段的统计关系，并进而根据这二关系来计算ASTER热红外波段的大气透过率。由于MODIS和ASTER是在同一颗星上。因此这种大气透过率估计方法保证了地表温度反演过程中所需大气参数的同步获取。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号