首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
The strain associated with the Horn Head Slide, a major tectonic break in the Dalradian rocks of NW Ireland, is recorded by pebbles in an adjacent quartzite horizon. Mean X/Y ratios of the deformed pebble shapes in excess of 8.0 are seen closest to the slide and the field of three-dimensional shapes lies along the K = 1 line. The usual methods of separating initial shape ratio (Ri) and tectonic strain ratio (Rs) from the deformed shape ratio (Rf) of ellipsoidal markers are based on measurements of variation in fluctuation (e.g., the (Rf/φ technique). However, due to the high X/Y strains in this situation and since the pebbles initially lay parallel to bedding and to a principal plane of the finite strain ellipsoid, fluctuation is generally very low. Thus, except for the least deformed X/Y data, the Rf/φ technique is inapplicable and other methods are used. For X/Y data with mean (Rf > 4.0: Rs is calculated as the harmonic mean of Rf; maximum Ri values only are obtained from the range of Rf data. For all Y/Z and X/Z data: Ri is calculated from the logarithmic range (ωlog) of Rf; Rs is simply obtained from the geometric mean of Rf modified by Ri. It is concluded from this that a varying prolate tectonic strain (K - 1.5) reaching X/Y values in excess of 8.00 was coaxially superimposed on an initial oblate shape fabric to produce the present field of deformed pebbles in the quartzite near the slide.  相似文献   

2.
Finite strain determined from Rf/φ analysis of deformed ellipse distributions cannot be separated into compactional and tectonic parts on the basis of population asymmetry about the orientational mean, as was originally suggested. Furthermore, where there is a ductility contrast between objects and matrix, Rf/φ analysis yields an invalid estimate of the strain suffered by the objects.  相似文献   

3.
A ‘soft’ carbon-based high-volatile bituminous (Ro max=0.68%) coal and a ‘hard’ carbon-based Pennsylvania anthracite (Ro max=5.27%) were deformed in the steady state at high temperatures and pressures in a series of coaxial and simple shear deformation experiments designed to constrain the role of shear strain and strain energy in the graphitization process. Tests were carried out in a Griggs-t type solid (NaCl) medium apparatus at T=400–900°C, constant displacement rates of 10-5−10-6 s−1, at confining pressures of 0.6 GPa (coaxial) or 0.8 and 1.0 GPa (simple shear). Coaxial samples were shortened up to 50%, whereas shear strains up to 4.9 were attained in simple shear tests. Experiments lasted up to 118 h. Deformed, high-volatile bituminous coal was extensively coked and no correlation between strain and Ro max, bireflectance or coal texture was observed in any samples. With increasing temperature, Ro max and bireflectance increase in highly anisotropic, coarse mosaic units, but remain essentially constant in the fine granular mosaic, which becomes more abundant at higher temperatures. Graphite-like reflectances are observed locally only in highly reactive macerals and in pyrolytic carbon veins. The degree of molecular ordering attained in deformed bituminous coal samples appears to be determined by the heating-pressurization path rather than by subsequent deformation.Graphitization did not occur in coaxially deformed anthracite. Nonetheless, dramatic molecular ordering occurs at T>700°C, with average bireflectance values increasing from 1.68% at 700°C to 6.36% at 900°C. Anisotropy is greatest in zones of high strain at all temperatures. In anthracite samples deformed in simple shear over the 600–900°C range at 1.0 GPa, the average Ro max values increase up to 11.9%, whereas average bireflectance values increase up to 10.7%. Bireflectance increases with progressive bedding rotation and, thus, with increasing shear strain. Graphitization occurs in several anthracite samples deformed in simple shear at 900°C. X-ray diffraction and transmission electron microscopy of highly anisotropic material in one sample confirms the presence of graphite with d002=0.3363 nm. These data strongly suggest that shear strain, through its tendency to align basic structural units, is the factor responsible for the natural transformation of anthracite to graphite at temperatures far below the 2200°C required in hydrostatic heating experiments at ambient pressure.  相似文献   

4.
Detailed micro-meso to macroscopic structural analyses reveal two deformation phases in the western limb of the Hazara-Kashmir Syntaxis(HKS). Bulk top to NW shearing transformed initially symmetrical NNE-SSW trending meso to macroscopic folds from asymmetric to overturned ones without changing their trend. Sigmoidal en-echelon tension gashes developed during this deformation,that were oblique to bedding parallel worm burrows and bedding planes themselves. Strain analyses of deformed elliptical ooids using the R_f/φ method constrain the internal strain patterns of the NNE-SSW structures. The principal stretching axis(S_3) defined by deformed elliptical ooids is oriented N27°E at right angles to WNW-ESE shortening. The deformed elliptical ooids in sub-vertical bedding vertical planes contain ooids that plunge ~70° SE due to NW-directed tectonic transport. Finite strain ratios are1.45(R_(xy)) parallel to bedding plane and 1.46(R_(yz)) for the vertical plane. From these 2D strain values, we derive an oblate strain ellipsoidal in 3D using the Flinn and Hsu/Nadai techniques. Strains calculated from deformed elliptical ooids average-18.10% parallel to bedding and-18.47% in the vertical plane.However, a balanced cross-section through the study area indicates a minimum of~-28% shortening.Consequently, regional shortening was only partially accommodated by internal deformation.  相似文献   

5.
A statistical analysis for the Rf/φ method is developed in the paper. The technique provides estimates of Rs, Ri and θ according to Rf and φ. Moreover, we can restore the pattern of initial orientations of marker objects by means of their frequency histogram, provided the strain is homogeneous. It is unnecessary to postulate random initial orientations if the principal directions of strain ellipsoid are known.  相似文献   

6.
A recent note by De Paor (1980) suggests that finite strain cannot be decomposed into tectonic and compaction components on the basis of asymmetry of the Rfφ data about the mean φ trace. This is true if only the shape of the Rfφ data field is considered, but shown to be incorrect when the distribution of data within this field is considered.  相似文献   

7.
A new diagram for the representation of stress states is proposed and compared with Nadai's stress diagram. The diagram is a graph whose axes are labelled as the differences of the principal stresses (σ2-σ3 as ordinate axis, σ1-σ2 as the abscissa; where σ1 > σ2 > σ3 are the principal stresses). The design of the plot has been deliberately modelled on that of the ‘log Flinn’ diagram which is used to represent finite strain ellipsoids. The position of the plotted stress state on this diagram depends on the nature of the deviatoric (non-hydrostatic) component of the stress tensor. The distance of the plotted stress from the origin corresponds broadly to the departure of the stress from a hydrostatic state and the parameter R, defined as the gradient of the line joining the plotted state to the origin, expresses the type of symmetry possessed by the stress tensor.It is explained how the diagram can be used to represent calculated palaeostresses and, in particular, how the parameter R can be found directly from some existing methods of stress analysis currently in use.Besides its proposed function to represent the results of such analyses it is felt that the use of the diagram may make clear the essential elements of the definitions of well-known terms used to describe particular stress states (e.g. plane stress, triaxial stress, axial compression, etc.).  相似文献   

8.
  相似文献   

9.
A worldwide data set of more than 500 humic coals from the major coal-forming geological periods has been used to analyse the evolution in the remaining (Hydrogen Index, HI) and total (Quality Index, QI) generation potentials with increasing thermal maturity and the ‘effective oil window’ (‘oil expulsion window’). All samples describe HI and QI bands that are broad at low maturities and that gradually narrow with increasing maturity. The oil generation potential is completely exhausted at a vitrinite reflectance of 2.0–2.2%Ro or Tmax of 500–510 °C. The initial large variation in the generation potential is related to the original depositional conditions, particularly the degree of marine influence and the formation of hydrogen-enriched vitrinite, as suggested by increased sulphur and hydrogen contents. During initial thermal maturation the HI increases to a maximum value, HImax. Similarly, QI increases to a maximum value, QImax. This increase in HI and QI is related to the formation of an additional generation potential in the coal structure. The decline in QI with further maturation is indicating onset of initial oil expulsion, which precedes efficient expulsion. Liquid petroleum generation from humic coals is thus a complex, three-phase process: (i) onset of petroleum generation, (ii) petroleum build-up in the coal, and (iii) initial oil expulsion followed by efficient oil expulsion (corresponding to the effective oil window). Efficient oil expulsion is indicated by a decline in the Bitumen Index (BI) when plotted against vitrinite reflectance or Tmax. This means that in humic coals the vitrinite reflectance or Tmax values at which onset of petroleum generation occurs cannot be used to establish the start of the effective oil window. The start of the effective oil window occurs within the vitrinite reflectance range 0.85–1.05%Ro or Tmax range 440–455 °C and the oil window extends to 1.5–2.0%Ro or 470–510 °C. For general use, an effective oil window is proposed to occur from 0.85 to 1.7%Ro or from 440 to 490 °C. Specific ranges for HImax and the effective oil window can be defined for Cenozoic, Jurassic, Permian, and Carboniferous coals. Cenozoic coals reach the highest HImax values (220–370 mg HC/g TOC), and for the most oil-prone Cenozoic coals the effective oil window may possibly range from 0.65 to 2.0%Ro or 430 to 510 °C. In contrast, the most oil-prone Jurassic, Permian and Carboniferous coals reach the expulsion threshold at a vitrinite reflectance of 0.85–0.9%Ro or Tmax of 440–445 °C.  相似文献   

10.
Phase relations of basalts from the Kerguelen large igneous province have been investigated experimentally to understand the effect of temperature, fO2, and fugacity of volatiles (e.g., H2O and CO2) on the differentiation path of LIP basalts. The starting rock samples were a tholeiitic basalt from the Northern Kerguelen Plateau (ODP Leg 183 Site 1140) and mildly alkalic basalt evolved from the Kerguelen Archipelago (Mt. Crozier on the Courbet Peninsula), representing different differentiation stages of basalts related to the Kerguelen mantle plume. The influence of temperature, water and oxygen fugacity on phase stability and composition was investigated at 500 MPa and all experiments were fluid-saturated. Crystallization experiments were performed at temperatures between 900 and 1,160°C under oxidizing (log fO2 ~ ΔQFM + 4) and reducing conditions (log fO2 ~ QFM) in an internally heated gas-pressure vessel equipped with a rapid quench device and a Pt-Membrane for monitoring the fH2. In all experiments, a significant influence of the fO2 on the composition and stability of the Mg/Fe-bearing mineral phases could be observed. Under reducing conditions, the residual melts follow a tholeiitic differentiation trend. In contrast, melts have high Mg# [Mg2+/(Mg2+ + Fe2+)] and follow a calk-alkalic differentiation trend at oxidizing conditions. The comparison of the natural phenocryst assemblages with the experimental products allows us to constrain the differentiation and pre-eruptive conditions of these magmas. The pre-eruptive temperature of the alkalic basalt was about 950–1,050°C. The water content of the melt was below 2.5 wt% H2O and strongly oxidizing conditions (log fO2 ~ ΔQFM + 2) were prevailing in the magma chamber prior to eruption. The temperature of the tholeiitic melt was above 1,060°C, with a water content below 2 wt% H2O and a log fO2 ~ ΔQFM + 1. Early fractionation of clinopyroxene is a crucial step resulting in the generation of silica-poor and alkali-rich residual melts (e.g., alkali basalt). The enrichment of alkalis in residual melts is enhanced at high fO2 and low aH2O.  相似文献   

11.
Oxygen fugacity (fO2) conditions were determined for 29 peridotite xenoliths from the A154-North and A154-South kimberlites of the Diavik diamond mine using the newly developed flank method modified specifically for measuring Fe3+ in mantle-derived pyropic garnets. The results indicate that the garnet-bearing lithospheric mantle beneath the central Slave craton is vertically layered with respect to oxidation state. The shallow (<140 km), “ultra-depleted” layer is the most oxidized section of garnet-bearing subcratonic mantle thus far measured, up to one log unit more oxidizing relative to the FMQ buffer [Δlog fO2 (FMQ) + 1]. The lower, more fertile layer has fO2 conditions that extend down to Δlog fO2 (FMQ) − 3.8, consistent with xenolith suites from other localities worldwide. Based on trace element concentrations in garnets, two distinct metasomatic events affected the mantle lithosphere at Diavik. An oxidized fluid imparted sinusoidal chondrite-normalized REE patterns on garnets throughout the entire depth range sampled. In contrast, a reducing melt metasomatic event affected only the lower portion of the lithospheric mantle. The fO2 state of the Diavik mantle sample suggests that diamond formation occurred by reduction of carbonate by fluids arising from beneath the lithosphere.  相似文献   

12.
The maceral and microlithotype composition of selected coals has been investigated with respect to the grinding properties, specifically Hardgrove grindability index (HGI), of the coals. The study expands upon previous investigations of HGI and coal petrology by adding the dimension of the amount and composition of the microlithotypes. Coal samples, both lithotypes and whole channels, were selected from restricted rank ranges based on vitrinite maximum reflectance: 0.75–0.80% Rmax, 0.85–0.90% Rmax and 0.95–1.00% Rmax. In this manner, the influence of petrographic composition can be isolated from the influence of rank. Previous investigations of high volatile bituminous coals demonstrated that, while rank is an important factor in coal grindability, the amount of liptinite and liptinite-rich microlithotypes is a more influential factor. In this study, we provide further quantitative evidence for the influence of microlithotypes on HGI and, ultimately, on pulverizer performance.  相似文献   

13.
阳储岭斑岩型W-Mo矿床位于江南造山带中部,是华南地区最早发现的斑岩型钨钼矿床。已探明WO3资源储量6.13万吨(平均品位0.2%),Mo资源储量1.69万吨(平均品位0.03%～0.06%),其成矿作用与中生代花岗质岩浆活动密切相关。区内发育早期花岗闪长岩和晚期二长花岗斑岩,钨矿体以细脉状和浸染状产于二长花岗斑岩体内,而花岗闪长岩内未见矿化。两期岩浆活动与钨成矿的关系尚不明确,制约其含矿差异性的因素尚不清楚。本文以花岗闪长岩和二长花岗斑岩中的黑云母为研究对象,对比研究两类岩浆结晶分异程度、氧逸度、岩浆流体卤素浓度,探讨其对钨成矿的制约。黑云母主量元素分析结果显示,阳储岭两类岩浆岩均为壳源,但显著不同于S型花岗岩的Mg/(Fe+Mg)和AlVI值,指示其具有I型花岗岩的特征。黑云母的微量元素信息显示,相对于花岗闪长岩中的黑云母(类型一),二长花岗斑岩中的黑云母(类型二)显示低的K/Rb、Nb/Ta比值,高的Rb、Cs、Nb和Ta含量,表明其分异程度较花岗闪长岩更高,更有利于钨的富集。两类黑云母所指示的岩浆氧逸度均在NNO缓冲线附近,表明其母岩...  相似文献   

14.
Marine, organic-rich rock units commonly contain little for vitrinite reflectance (VR0) measurement, the most commoly used method of assessing thermal maturity. This is true of the Lower Jurassic “Nordegg Member”, a type I/II, sulphur-rich source rock from the Western Canada Sedimentary Basin. This study examines the advantages and pitfalls associated with the use of Rock-Eval Tmax and solid bitumen reflectance (BR0) to determined maturity in the “Nordegg”. Vitrinite reflectance data from Cretaceous coals and known coalification gradients in the study area are used to extrapolate VR0 values for the “Nordegg”.Tmax increases non-linearly with respect to both BR0 and extrapolated VR0 values. A sharp increase in the reflectaance of both solid bitumen and vitrinite occurs between Tmax 440–450°C, and is coincident with a pronounced decrease in Hydrogen Index values and the loss of solid bitumen and telalginite fluorescence over the same narrow Tmax interval. This Tmax range is interpreted as the main zone of hydrocarbon generation in the “Nordegg”, and corresponds to extrapolated VR0 values of 0.55–0.85%. The moderate to high sulphur contents in the kerogen played a significant role in determining the boundaries of the “Nordegg” oil window.A linear relationship between BR0 and extrapolated VR0, as proposed elsewhere, is not true for the “Nordegg”. BR0 increases with respect to extrapolated VR0 according to Jacob's (1985) formula (VR0=0.618×(BR0)+0.40) up to VR0≈0.72% (BR0≈0.52%). Beyond this point, BR0 increases sharply relative to extrapolated VR0, according to the relatioship VR0 = 0.277 × (BR0) + 0.57 (R2 = 0.91). The break in the BR0−VR0 curve at 0.72%VR0 is thought to signifiy the peak of hydrocarbon generation and represents a previously unrecognized coalification jump in the solid bitumen analogous to the first coalification jump of liptinites.  相似文献   

15.
剪切作用对有机质光学各向异性体发育的控制   总被引：1，自引：0，他引：1  
湘西泸阳县白沙镇西不远处发育一条含大量凝析油的超浅成脆韧性剪切带。该剪切带中发育了一种光学各向异性体,Ro,min=0.34-0.81%;Ro,med=1.01-1.84%;Ro,max=2.52-3.20%,最大双反射率可达87%。研究表明,光学各向异性椭球体的R0,max轴的分布与S面理一致,表明了剪切应力对有机质光学各向异性的发育具有一定的影响和控制。   相似文献   

16.
黑云母是花岗质岩石中常见的造岩矿物,其成分可以有效指示花岗岩形成的物理化学条件和岩石成因。巴斯铁列克矿床是近年来在新疆阿尔泰造山带南缘发现的首例二叠纪矽卡岩型钨多金属矿床。矿区出露多种类型二叠纪含钨花岗岩。为理清花岗质岩体之间、岩体与钨多金属矿化之间的关系,文章采用电子探针测定了黑云母花岗岩、二长花岗岩、二云母花岗岩和钾长花岗岩中的黑云母成分。结果表明,所有黑云母具有富铁、高铝、贫镁特征,含铁指数(Fe2+/(Mg+Fe2+))为0.66~0.80,二云母花岗岩属铁质黑云母而黑云母花岗岩、二长花岗岩和钾长花岗岩属铁叶黑云母。所有岩石是具有A型特征的I型花岗岩。不同类型岩石中黑云母的成分差异与岩浆来源、分异演化程度有关。二云母花岗岩中黑云母的w(MgO)与结晶温度最高,与黑云母平衡流体的log(fHF/fHCl)值（-1.13~-1.25）最低,log(fH2O/fHF)值（4.64~4.96）最高,母岩浆相对富Cl;黑云母花岗岩中log(fHF/fHCl)值最高,log(fH2O/fHF)最低,与二长花岗岩是同一岩浆房不同演化阶段的产物,与二云母花岗岩和钾长花岗岩属不同的岩浆体系,母岩浆相对富F元素。黑云母花岗岩与W矿化关系更密切。  相似文献   

17.
Results of an organic petrographic study of the Kupferschiefer (Zechstein, Upper Permian) in northern Germany are presented. Because vitrinite occurs only sporadically in this black shale, the random reflectance (Rr) of a relatively high reflecting, vitrinite-like variety of bituminite was measured as a maturity parameter and the problems connected with this procedure were investigated.The main organic component is bituminite, generally with an abundance of more than 90%. Sporomorphs and algae are relatively scarce, inertinite is usually a trace component, and vitrinite is present only in some samples taken close to the coast of the Zechstein sea. Migrabitumen also occurs in small amounts in a few samples. The range of the bituminite reflectance values is often considerable and depends on rank, anisotropy, particle size, porosity, and shearing. Interpretation of the reflectance values is made difficult by differences of up to 0.4% Rr between layers within the Kupferschiefer. Hydrothermal alteration may also be present. The difference between the reflectance of the light and normal varieties of bituminite disappears between 0.9 and 1.2% Rr.Bituminite behaves in a way very similarly to vitrinite during coalification. Their reflectance is identical between 2 and 4% Rr. Below 2% Rr, the reflectance of bituminite is lower than that of vitrinite. Linear regression curves valid up to 4% Rr were calculated for Rmax versus Rr and for Rr versus Rmax. Taking certain limitations into consideration, bituminite reflectance may be used as a coalification parameter.  相似文献   

18.
Synthetic spinel harzburgite and lherzolite assemblages were equilibrated between 1040 and 1300° C and 0.3 to 2.7 GPa, under controlled oxygen fugacity (f O 2). f O 2 was buffered with conventional and open double-capsule techniques, using the Fe−FeO, WC-WO2-C, Ni−NiO, and Fe3O4−Fe2O3 buffers, and graphite, olivine, and PdAg alloys as sample containers. Experiments were carried out in a piston-cylinder apparatus under fluid-excess conditions. Within the P-T-X range of the experiments, the redox ratio Fe3+/ΣFe in spinel is a linear function of f O 2 (0.02 at IW, 0.1 at WCO, 0.25 at NNO, and 0.75 at MH). It is independent of temperature at given Δlog(f O 2), but decreases slightly with increasing Cr content in spinel. The Fe3+/ΣFe ratio falls with increasing pressure at given Δlog(f O 2), consistent with a pressure correction based on partial molar volume data. At a specific temperature, degree of melting and bulk composition, the Cr/(Cr+Al) ratio of a spinel rises with increasing f O 2. A linear least-squares fit to the experimental data gives the semi-empirical oxygen barometer in terms of divergence from the fayalite-magnetite-quartz (FMQ) buffer:
  相似文献   

19.
Measurements of total, incremental and progressive strains associated with the development of small scale crenulation cleavage in some low-grade metamorphic rocks from Australia and Switzerland are applied to a discussion of the mechanical significance of the cleavage.Limits are placed on the amount of incremental and total slip or simple shear possible along the cleavage by the observation that the XY principal plane trace of bulk total crenulation strain coincides within 4° of the crenulation cleavage trace in all cases where this strain has been measured or estimated. The measurements are made on eight specimens using deformed porphyroblasts, crystal fibres in pressure-shadows around pyrite and flattened folds and include deformations with coaxial and non-coaxial histories.Further measurements derived from pressure-shadow fibres (eight specimens) show that the style and orientation of incremental deformation are essentially independent of the crenulation cleavage, except for a limit (43°) to the obliquity of the principal incremental extension axis during a given cleavage episode. The only special deformation related to the cleavage is the coaxial one. An indication of passive cleavage behaviour at high strain is shown by the progressive strain history of one specimen. Evidence for passive rotation of a transected axial plane is shown by another. A model is proposed to account for these observations, especially the conditions necessary for initiation and continued development of a new cleavage fabric.Some further applications of existing strain measurement techniques are described: of the Rf/Øf method to heterogeneously superposed tectonic strains and of an improved procedure of t′α/α flattening analysis.  相似文献   

20.
The effect of coal composition, particularly the organic fraction, upon gas sorption has been investigated for Bowen Basin and Sydney Basin, Australia coals. Maceral composition influences on gas retention and release were investigated using isorank pairs of hand-picked bright and dull coal in the rank range of high volatile bituminous (0.78% Ro max) to anthracite (3.01% Ro max). Adsorption isotherm results of dry coals indicated that Langmuir volume (VL) for bright and dull coal types followed discrete, second-order polynomial trends with increasing rank. Bright coals had a minimum VL at 1.72% Ro max and dull coals had a minimum VL at 1.17% Ro max. At low rank, VL was greater in bright coal by about 10 cm3/g, but as rank increased, the bright and dull trends converged and crossed at 1.65% Ro max. At ranks higher than 1.65% Ro max, both bright and dull coals followed similar trends. These competing trends mean that the importance of maceral composition on VL varies according to rank. In high volatile bituminous coals, increases in vitrinite content are associated with increases in adsorption capacity. At ranks higher than medium to low volatile bituminous, changes in maceral composition may exert relatively little influence on adsorption capacity. The Langmuir pressure (PL) showed a strong relationship of decreasing PL with increasing rank, which was not related to coal type. It is suggested that the observed trend is related to a decrease in the heterogeneity of the pore surfaces, and subsequent increased coverage by the adsorbate, as coal rank increases. Desorption rate studies on crushed samples show that dull coals desorb more rapidly than bright coals and that desorption rate is also a function of rank. Coals of lower rank have higher effective diffusivities. Mineral matter was found to have no influence on desorption rate of these finely crushed samples. The evolution of the coal pore structure with changing rank is implicated in diffusion rate differences.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号