首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The surface of the 40 000 km2 Okavango alluvial fan is remarkably smooth, and almost everywhere lies within two to three metres of a perfectly smooth theoretical surface. Deviations from this perfect surface give rise to islands in the Okavango wetlands. This micro‐topography was mapped by assigning empirical elevations to remotely sensed vegetation community classes, based on the observation that vegetation is very sensitive to small, local differences in elevation. Even though empirical, the method produces fairly accurate results. The technique allows estimation of depths of inundation and therefore will be applicable even when high resolution radar altimetry becomes available. The micro‐topography has arisen as a result of clastic sedimentation in distributary channels, which produces local relief of less than two metres, and more importantly as a result of chemical precipitation in island soils, which produces similar local relief. The micro‐topography is, therefore, an expression of the non‐random sedimentation taking place on the fan. Volume calculations of islands extracted from the micro‐topography, combined with estimates of current sediment in?ux, suggest that the land surface of the wetland may only be a few tens of thousands of years old. Constant switching of water distribution, driven by local aggradation, has distributed sediment widely. Mass balance calculations suggest that over a period of c. 150 000 years all of the fan would at one time or other have been inundated, and thus subject to sedimentation. Coalescing of islands over time results in net aggradation of the fan surface. The amount of vertical aggradation on islands and in channels is restricted by the water depth. Restricted vertical relief, in turn, maximizes the distribution of water, limiting its average depth. Aggradation in the permanent swamps occurs predominantly by clastic sedimentation. Rates of aggradation here are very similar to those in the seasonal swamps, maintaining the overall gradient, possibly because of the operation of a feedback loop between the two. The limited amount of local aggradation arising from both clastic and chemical sedimentation, combined with constant changes in water distribution, has resulted in a near‐perfect conical surface over the fan. In addition to providing information on sedimentary processes, the micro‐topography has several useful hydrological applications. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

2.
Irrigation experiments on 12 instrumented field plots were used to assess the impact of dynamic soil crack networks on infiltration and run‐off. During applications of intensity similar to a heavy rainstorm, water was seen being preferentially delivered within the soil profile. However, run‐off was not observed until soil water content of the profile reached field capacity, and the apertures of surface‐connected cracks had closed >60%. Electrical resistivity measurements suggested that subsurface cracks persisted and enhanced lateral transport, even in wet conditions. Likewise, single‐ring infiltration measurements taken before and after irrigation indicated that infiltration remained an important component of the water budget at high soil water content values, despite apparent surface sealing. Overall, although the wetting and sealing of the soil profile showed considerable complexity, an emergent property at the hillslope scale was observed: all of the plots demonstrated a strikingly similar threshold run‐off response to the cumulative precipitation amount. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

3.
The hydrological and erosive response of the Mediterranean eco‐geomorphologic system has showed a very variable and complex behaviour depending on several factors: topography, geology, vegetation pattern, soil properties, land use management, etc. Climate is a key factor due to the great spatial and temporal variability. This research was carried out over different micro‐environments representative from five hillslopes localized in the Littoral Bethic Mountains in the south of Spain. The results of 20 experiments with rainfall simulations on micro‐plots (0.24 m2) and the differences of the incidence of some biotic and abiotic factors in the eco‐geomorphologic system from semi‐arid, dry‐Mediterranean and sub‐humid sites are exposed. Runoff, soil moisture and sediment were measured before, during and after the experiments. The results have shown rock fragments disposition on soil surface and vegetation seem to be the main factors that control the hydrological and erosive response at the micro‐plot‐scale of the experiments. Embedded rock fragments are the most important soil surface property because they reduce the infiltration. Whilst vegetation increases it what is more influential on the hydrological and erosive response of micro‐environments at more arid sites. We have also observed that there are micro‐environment particularities which play a more important role than the localization in the climatic gradient at micro‐plot scale. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

4.
The role of bedrock groundwater in rainfall–runoff processes is poorly understood. Hydrometric, tracer and subsurface water potential observations were conducted to study the role of bedrock groundwater and subsurface flow in the rainfall–runoff process in a small headwater catchment in Shiranui, Kumamoto prefecture, south‐west Japan. The catchment bedrock consists of a strongly weathered, fractured andesite layer and a relatively fresh continuous layer. Major chemical constituents and stable isotopic ratios of δ18O and δD were analysed for spring water, rainwater, soil water and bedrock groundwater. Temporal and spatial variation in SiO2 showed that stream flow under the base flow condition was maintained by bedrock groundwater. Time series of three components of the rainstorm hydrograph (rainwater, soil water and bedrock groundwater) separated by end member mixing analysis showed that each component fluctuated during rainstorm, and their patterns and magnitudes differed between events. During a typical mid‐magnitude storm event, a delayed secondary runoff peak with 1·0 l s−1 was caused by increase in the bedrock groundwater component, whereas during a large rainstorm event the bedrock groundwater component increased to ≈ 2·5 l s−1. This research shows that the contribution of bedrock groundwater and soil water depends strongly on the location of the groundwater table, i.e. whether or not it rises above the soil–bedrock interface. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

5.
In order to harvest runoff to palliate water disaster as well as effectively manage irrigation and fertilizer application in the studied region, it is necessary to better understand the runoff processes. A newly designed runoff collection system for a plot scale was used to partition runoff under contrasting rainfall events into surface flow and subsurface flow to obtain characteristics of surface runoff and throughflow in a purple soil (Regosols in FAO taxonomy, Entisol in USDA taxonomy) of Sichuan, China. Under small rainfall (shower and drizzle), only surface runoff was observed. It is noted that, under shower, particularly with antecedent dry soil conditions, the highest peak surface runoff significantly lagged behind that of rainfall, because air‐locked soil pores of the top layer appeared temporally. Under rainstorm and downpour, surface runoff and throughflow both commenced and showed hysteresis. The hydrograph of surface runoff better resembled that of rainfall than throughflow did. The durations of throughflow discharge of post‐rainfall‐end were near the same (within 24 h) under various rainfalls and rather dependent upon the soil properties than the rainfall characteristics. Throughflow is about 60–90% of total runoff, and especially significant in a ploughed layer under downpour. The chloride concentration of throughflow was over twice that of surface runoff and rainfall, implying that throughflow contains more nutrients than surface runoff. Presumably, surface runoff was primarily governed by an infiltration‐excess or saturated excess‐infiltration mechanism under unsaturated or saturated soil conditions. Therefore, the management of water and fertilizer, and the harvesting of water flow in the ploughed soil layer, should be emphasized in this region. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

6.
In order to evaluate the influence of the measuring technique on the determination of (micro‐)aggregation in soil and sediment samples, results of grain size distributions of undispersed silty soil samples obtained by the sieve‐pipette method are compared with those obtained using a laser diffraction grain size analyser, the Coulter LS‐100. Reduced major axis relationships are calculated which may be used to convert Coulter LS‐100 results to those obtained by the sieve‐pipette method. The relationships obtained are very similar to the reduced major axis relationships established for dispersed silty soil samples. The results also show that the Coulter LS measurements have a systematic bias compared to the sieve‐pipette data. This implies that, if the percentage of (micro‐)aggregation is determined, the (interpretation of the) results will be strongly dependent on the measurement technique used. Using the calibration relationships that were established, nomographs can be developed to predict the level of sieve‐pipette (micro‐) aggregation from Coulter LS‐100 data. Copyright © 1999 John Wiley & Sons, Ltd.  相似文献   

7.
Soil macropore networks are subsurface connected void spaces caused by processes such as fracture of soils, micro‐erosion and fauna burrows. Axial X‐ray computed tomography (CT) scanning provides a convenient means of recording the spatial structure of soil macropore networks. The objective of this study were to (1) based on CT technique and GIS digitized image method, construction a new technique for tracing, visualizing and measuring the soil macropore networks and (2) investigate the effects of farming activities on soil macropore networks characteristics. Our technique uses left‐turning and nine‐direction judgment methods, a combination of the layer‐by‐layer analysis method and the up‐down tracking algorithm. The characteristics for the overall structure patterns of macropores, the spatial distribution of the macropore networks and each single macropore network can be conveniently identified by our technique. Eight undisturbed soil columns from fields with two distinct land uses (under cultivation and not been cultivated) and four different depths (0–20, 20–40, 40–60 and 60–80 cm) were investigated. The soil columns were scanned using X‐ray CT at a voxel resolution of 0.075 × 0.075 × 3.000 mm. Results indicate that farming activities can destroy the initial structure of macropores, and those remaining are mainly small‐sized and medium‐sized networks with lower extension and hydraulic conductivity. The network properties show a significant difference between upper and lower layer. The results can provide beneficial reference to further research centered on non‐equilibrium flow prediction and chemical transport modeling in field soils. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

8.
Purging influence on soil‐gas concentrations for volatile organic compounds (VOCs), as affected by sampling tube inner diameter and sampling depth (i.e., system volume) for temporary probes in fine‐grained soils, was evaluated at three different field sites. A macro‐purge sampling system consisted of a standard, hollow, 3.2‐cm outer diameter (OD) drive probe with a retractable sampling point attached to an appropriate length of 0.48‐cm inner diameter (ID) Teflon® tubing. The macro‐purge sampling system had a purge system volume of 24.5 mL at a 1‐m depth. In contrast, the micro‐purge sampling systems were slightly different between the field sites and consisted of a 1.27‐cm OD drive rod with a 0.10‐cm ID stainless steel tube or a 3.2‐cm OD drive rod with a 0.0254‐cm inner diameter stainless steel tubing resulting in purge system volumes of 1.2 and 7.05 mL at 1‐m depths, respectively. At each site and location within the site, with a few exceptions, the same contaminants were identified in the same relative order of abundances indicating the sampling of the same general soil atmosphere. However, marked differences in VOC concentrations were identified between the sampling systems, with micro‐purge samples having up to 27 times greater concentrations than their corresponding macro‐purge samples. The higher concentrations are the result of a minimal disturbance of the ambient soil atmosphere during purging. The minimal soil‐gas atmospheric disturbance of the micro‐purge sampling system allowed for the collection of a sample that is more representative of the soil atmosphere surrounding the sampling point. That is, a sample that does not contain an atmosphere that has migrated from distance through the geologic material or from the surface in response to the vacuum induced during purging soil‐gas concentrations. It is thus recommended that when soil‐gas sampling is conducted using temporary probes in fine‐grained soils, the sampling system use the smallest practical ID soil‐gas tubing and minimize purge volume to obtain the soil‐gas sample with minimal risk of leakage so that proper decisions, based on more representative soil‐gas concentrations, about the site can be made.  相似文献   

9.
As an alternative to geostatistical modeling, we characterized the hydrology of a semi-arid landscape in southeastern Washington state, USA, by coupling spatial patterns identified in the distributions of relative relief and vegetation with the influence each has on soil moisture storage and evapotranspiration at the appropriate scale. Gauging precipitation, soil moisture, and evapotranspiration over a two-year period while concurrently mapping relative relief and vegetation distributions at three scales ranging from centimeters to 90 m, we determined that soil moisture and soil moisture storage are significantly greater in topographic concavities than in convexities at the microrelief (20–50 cm) scale but are not significantly different in relief features at larger scales. A generalized microrelief surface produced using a two-dimensional Fourier transformation provided a good representation of the distribution of soil moisture within microrelief when scaled to soil moisture values. Applying a spatial point process analysis we determined that big sage are randomly distributed across the landscape at all scales, suggesting that lysimeter-derived sage evapotranspiration rates also be distributed randomly across the landscape. Where sage were not present, we applied an autoregressive moving-average model conditioned on grass lysimeter measurements to derive evapotranspiration rates. Combining these hydrologic spatial patterns derived from distributions in relief and vegetation with measured precipitation inputs and evapotranspiration outputs, we created a spatially distributed model of soil moisture which we tested against measured values over an eight-week period. The model provides accurate characterization of soil moisture, allows estimates of soil moisture between measurement points, permits extrapolation of soil moisture distributions outside the gauged area, and maintains small-scale variability when aggregating soil moisture to successively larger scales.  相似文献   

10.
Hillslope asymmetry, i.e. variation in hillslope form as a function of slope aspect and/or mean solar insolation, has been documented in many climates and geologic contexts. Such patterns have the potential to help us better understand the hydrologic, ecologic, and geomorphologic processes and feedbacks operating on hillslopes. Here we document asymmetry in the fraction of hillslope relief accommodated by cliffs in weathering‐limited hillslopes of drainage basins incised into the East Kaibab Monocline (northern Arizona) and Raplee Ridge Monocline (southern Utah) of the southern Colorado Plateau. We document that south‐ and west‐facing hillslopes have a larger proportion of hillslope relief accommodated by cliffs compared with north‐ and east‐facing hillslopes. Cliff abundance correlates positively with mean solar insolation and, by inference, negatively with soil/rock moisture. Solar insolation control of hillslope asymmetry is an incomplete explanation, however, because it cannot account for the fact that the greatest asymmetry occurs between southwest‐ and northeast‐facing hillslopes rather than between south‐ and north‐facing hillslopes in the study sites. Modeling results suggest that southwest‐facing hillslopes are more cliff‐dominated than southeast‐facing hillslopes of the same mean solar insolation in part because potential evapotranspiration rates, which control the soil/rock moisture that drives weathering, are controlled by the product of solar insolation and a nonlinear function of surface temperature, together with the fact that southwest‐facing hillslopes receive peak solar insolation during warmer times of day compared with southeast‐facing hillslopes. The dependence of water availability on both solar insolation and surface temperature highlights the importance of the diurnal cycle in controlling water availability, and it provides a general explanation for the fact that vegetation cover tends to exhibit the greatest difference between northeast‐ and southwest‐facing hillslopes in the Northern Hemisphere and between southeast‐ and northwest‐facing hillslopes in the Southern Hemisphere. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

11.
Snowmelt water supplies streamflow and growing season soil moisture in mountain regions, yet pathways of snowmelt water and their effects on moisture patterns are still largely unknown. This study examined how flow processes during snowmelt runoff affected spatial patterns of soil moisture on two steep sub‐alpine hillslope transects in Rocky Mountain National Park, CO, USA. The transects have northeast‐facing and east‐facing aspects, and both extend from high‐elevation bedrock outcrops down to streams in valley bottoms. Spatial patterns of both snow depth and near‐surface soil moisture were surveyed along these transects in the snowmelt and summer seasons of 2008–2010. To link these patterns to flow processes, soil moisture was measured continuously on both transects and compared with the timing of discharge in nearby streams. Results indicate that both slopes generated shallow lateral subsurface flow during snowmelt through near‐surface soil, colluvium and bedrock fractures. On the northeast‐facing transect, this shallow subsurface flow emerged through mid‐slope seepage zones, in some cases producing saturation overland flow, whereas the east‐facing slope had no seepage zones or overland flow. At the hillslope scale, earlier snowmelt timing on the east‐facing slope led to drier average soil moisture conditions than on the northeast‐facing slope, but within hillslopes, snow patterns had little relation to soil moisture patterns except in areas with persistent snow drifts. Results suggest that lateral flow and exfiltration processes are key controls on soil moisture spatial patterns in this steep sub‐alpine location. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

12.
Regional analysis of slope stability is often constrained by availability of data. Model requirements for input data cannot be met at the desired spatial resolution because data are either site‐speci?c or non‐existent. Faced with these dif?culties it has often been the practice to assume that certain parameters are uniform throughout the area of interest. An alternative approach proposed here allows a more detailed discrimination of slope stability conditions. Based on the principles of hillslope hydrology, hydrologic information can be generated at suf?cient resolution to allow higher resolution slope stability analysis. Measurements from an instrumented network in a small area have been used to establish index‐based models for topographic and climate‐related controls of piezometric response. The ability to relate groundwater levels to rainfall and topographic parameters provides a means of up‐scaling to larger catchments and ultimately the opportunity to generate a catchment‐wide prediction of the distribution, magnitude and frequency of rainstorm‐generated groundwater levels. The example provided in this study uses the topography index of TOPMODEL in GIS to predict the spatial patterns of groundwater elevation for seasonal soil moisture conditions and given rainfall inputs. This allows modelling of catchment‐wide response of soil water to rainstorms with different return periods (representing different magnitudes), and is an essential prerequisite for a probabilistic regional slope stability analysis. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

13.
Unsuccessful attempts to use process‐scale models to predict long‐term aeolian sediment transport patterns have long been a feature of aeolian research. It has been proposed that one approach to overcome these problems is to identify micro‐scale variables that are important at longer timescales. This paper assesses the contribution of two system variables (secondary airflow patterns and fetch distance) to medium‐term (months to years) dune development. The micro‐scale importance of these variables had been established during previous work at the site (Magilligan Strand, Northern Ireland). Three methods were employed. First, sand drift potentials were calculated using 2 years of regional wind data and a sediment transport model. Second, wind data and large trench traps (2 m length × 1 m width × 1·5 m depth) were used to assess the actual sediment transport patterns over a 2‐month period. Third, a remote‐sensing technique for the identification of fetch distance, a saltation impact sensor (Safire) and wind data were utilized to gauge, qualitatively, sediment transport patterns over a 1‐month period. Secondary airflow effects were found to play a major role in the sediment flux patterns at these timescales, with measured and predicted rates matching closely during the trench trap study. The results suggest that fetch distance is an unimportant variable at this site. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

14.
Previous geomorphological investigations using the traversing micro‐erosion meter (TMEM) have identified daily and hourly contractions and expansions of littoral rock on a range of lithologies. While organic influences on these patterns have been inferred, this has rarely been tested in a controlled way. Here, a TMEM was used to measure micro‐scale (<mm) topographic changes on supratidal limestone of the Massif des Calanques, southern France. Four TMEM monitoring sites (each 64 cm2) were set up in total, two in the Calanque de Morgiou and two in the Presqu'ile de Cassis. On both shores one TMEM bolt site was positioned on bare rock and the other on colonized rock. TMEM data were collected and the surface micro‐topography mapped for each site at two‐hourly intervals from early morning to late evening across one day in mid‐summer. Significant relative expansion and contraction was observed between measurement periods at all four sites, regardless of biofilm colonization (P < 0.001 in all instances), and sometimes between adjacent zones on the rock surface (at a scale of centimetres). Rock with and without biofilm behaved broadly similarly, but the magnitude of topographic change varied: average movement from one interval to the next was 0.03 mm on bare sites and 0.06 mm on biofilm‐colonized sites. As expected, patterns of surface change related largely to insolation, with greatest movement occurring in the morning and evening when thermal gradients were steepest. Interestingly, the presence of a biofilm intensified rock expansion, but delayed surface response to microclimatic variability. We largely attribute this effect to biofilm influences on surface albedo, and hypothesize that episodes of contraction and expansion are superimposed onto longer (annual to decadal) episodes of surface movement and downwearing. Short‐term TMEM studies therefore need to be coupled with longer‐term seasonal and annual measurements to improve understanding of rock surface dynamics. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

15.
Increased soil erosion in immediate post‐wildfire years has been well documented in the literature, but many unanswered questions remain about the factors controlling erosional responses in different regional settings. The field site for the present study was located in a closed canopy, subalpine forest in Kootenay National Park, British Columbia that was subjected to a high‐intensity crown fire in the summer of 2003. Low soil erosion values were documented at the study site in the years immediately following the 2003 wildfire, with estimates ranging from approximately 10‐1 up to 100 t ha‐1. Following the wildfire, notable duff coverage (the duff layer is the combined fermentation and humus soil organic layers) remained above the mineral soil. This finding supports earlier studies documenting only partial duff consumption by high‐intensity wildfires in the boreal forest of Canada. It is postulated that remnant duff coverage after many high‐intensity wildfires impacts the hydrological and soil erosional response to rainstorm events in post‐wildfire years. In particular, duff provides detention storage for infiltrating rainfall and, therefore, may inhibit the generation of overland flow. Furthermore, duff also provides a physical barrier to soil erosion. The Green–Ampt model of rainfall infiltration is employed to better assess how interactions between rainfall duration/intensity and soil/duff properties affect hydrological response and the generation of overland flow. Model results show that duff provides an effective zone for detention storage and that duff accommodates all rainfall intensities to which it was subjected without the occurrence of surface ponding. In addition, the penetration of the wetting front is relatively slow in duff due to its high porosity and water storage potential. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

16.
Impact of rainfall pattern on interrill erosion process   总被引：3，自引：0，他引：3       下载免费PDF全文
The impact of rainfall pattern on the interrill erosion process is not fully understood despite its importance. Systematic rainfall simulation experiments involving various rainfall intensities, stages, intensity sequences, and surface cover conditions were conducted in this study to investigate their effects on the interrill erosion process. Five rainfall patterns designed with the same total kinetic energy/precipitation (increasing, decreasing, rising–falling, falling–rising and constant patterns) were randomly delivered to a pre‐wet clay loam soil surface at a 10° slope gradient. Significant differences in soil losses were observed among the different rainfall patterns and stages, but there was no obvious difference in runoff. Kinetic energy flux (KEr) was a governing factor for interrill erosion, and constant rainfall pattern (CST) produced nine times greater soil loss than runs with no KEr. Varied‐intensity patterns had a profound effect on raindrop‐induced sediment transport processes; path analysis results indicated that said effect was complex, interactive and intensity‐dependent. Low hydraulic parameter thresholds further indicated that KEr was the dominant factor in detaching soil particles, while overland flow mainly contributed to transporting the pre‐detached particles. This study not only sheds light on the mechanism of interrill sediment transport capacity and detachability, but also may provide a useful database for developing event‐based interrill erosion prediction models. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

17.
As a fundamental unit of the landscape, hillslopes are studied for their retention and release of water and nutrients across a wide range of ecosystems. The understanding of these near‐surface processes is relevant to issues of runoff generation, groundwater–surface water interactions, catchment export of nutrients, dissolved organic carbon, contaminants (e.g. mercury) and ultimately surface water health. We develop a 3‐D physics‐based representation of the Panola Mountain Research Watershed experimental hillslope using the TOUGH2 sub‐surface flow and transport simulator. A recent investigation of sub‐surface flow within this experimental hillslope has generated important knowledge of threshold rainfall‐runoff response and its relation to patterns of transient water table development. This work has identified components of the 3‐D sub‐surface, such as bedrock topography, that contribute to changing connectivity in saturated zones and the generation of sub‐surface stormflow. Here, we test the ability of a 3‐D hillslope model (both calibrated and uncalibrated) to simulate forested hillslope rainfall‐runoff response and internal transient sub‐surface stormflow dynamics. We also provide a transparent illustration of physics‐based model development, issues of parameterization, examples of model rejection and usefulness of data types (e.g. runoff, mean soil moisture and transient water table depth) to the model enterprise. Our simulations show the inability of an uncalibrated model based on laboratory and field characterization of soil properties and topography to successfully simulate the integrated hydrological response or the distributed water table within the soil profile. Although not an uncommon result, the failure of the field‐based characterized model to represent system behaviour is an important challenge that continues to vex scientists at many scales. We focus our attention particularly on examining the influence of bedrock permeability, soil anisotropy and drainable porosity on the development of patterns of transient groundwater and sub‐surface flow. Internal dynamics of transient water table development prove to be essential in determining appropriate model parameterization. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

18.
Soil surface roughness not only delays overland flow generation but also strongly affects the spatial distribution and concentration of overland flow. Previous studies generally aimed at predicting the delay in overland flow generation by means of a single parameter characterizing soil roughness. However, little work has been done to find a link between soil roughness and overland flow dynamics. This is made difficult because soil roughness and hence overland flow characteristics evolve differently depending on whether diffuse or concentrated erosion dominates. The present study examined whether the concept of connectivity can be used to link roughness characteristics to overland flow dynamics. For this purpose, soil roughness of three 30‐m2 tilled plots exposed to natural rainfall was monitored for two years. Soil micro‐topography was characterized by means of photogrammetry on a monthly basis. Soil roughness was characterized by the variogram, the surface stream network was characterized by network‐based indices and overland flow connectivity was characterized by Relative Surface Connection function (RSCf) functional connectivity indicator. Overland flow hydrographs were generated by means of a physically‐based overland flow model based on 1‐cm resolution digital elevation models. The development of eroded flow paths at the soil surface not only reduced the delay in overland flow generation but also resulted in a higher continuity of high flow velocity paths, an increase in erosive energy and a higher rate of increase of the overland flow hydrograph. Overland flow dynamics were found to be highly correlated to the RSCf characteristic points. By providing information regarding overland flow dynamics, the RSCf may thus serve as a quantitative link between soil roughness and overland flow generation in order to improve the overland flow hydrograph prediction. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

19.
Biological soil crusts (BSCs) are ubiquitous communities of diminutive organisms such as cyanobacteria, green algae, lichens, mosses and others associated closely with particles of surface soil, forming a cohesive thin horizontal layer. The ecological roles of BSCs affecting soil nutrient cycling, stability and hydrological processes, influencing the germination and establishment of vascular plants, and serving as habitats for numerous arthropods and microorganism have been well documented. We tested the hypothesis that micro‐geomorphological features determine the spatial distribution of BSCs by reallocating related abiotic resources at small‐ and medium‐scales in the Tengger Desert. Our results showed that higher soil pH and higher total potassium content in topsoil positively correlated with the colonization of cyanobacteria and algae in the earliest successional stages of BSCs, while increasing dust deposition onto the topsoil enhanced the development of lichen and mosses in the later stages of BSCs. Increasing soil moisture raised the proportion of mosses and lichen in BSCs, this will possibly change the ecological functions of BSCs, such as nitrogen‐fixation by cyanobacteria, due to the conversion from a complex to relative simple type of BSC. Micro‐geomorphology has created various habitats at a small‐scale affecting colonization and development of cryptogams. This paper considers the contribution of micro‐geomorphology to biodiversity in the extreme arid desert systems. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

20.
  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号