首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
In this study, the evaluation of static and seismic bearing capacity factors for a shallow strip footing was carried out by using the method of characteristics, which was extended to the seismic condition by means of the pseudo-static approach. The results, for both smooth and rough foundations, were checked against those obtained through finite element analyses.Under seismic conditions the three bearing capacity problems for Nc, Nq and Nγ were solved independently and the seismic bearing capacity factors were evaluated accounting separately for the effect of horizontal and vertical inertia forces arising in the soil, in the lateral surcharge and in the superstructure.Empirical formulae approximating the extensive numerical results are proposed to compute the static values of Nγ and the corrective coefficients that can be introduced in the well-known Terzaghi׳s formula of the bearing capacity to extend its applicability to seismic design of foundations.  相似文献   

2.
为了提高砖石古塔的抗震性能,针对其地震反应特点,研究了砖石古塔的抗震薄弱部位、抗震性能评估方法、评价指标以及抗震加固措施。主要研究结论为:(1)提出了采用极限承载能力与层间位移角2个指标综合评估砖石古塔的抗震性能,并通过工程实例验证了该方法的有效性。(2)提出了对穿锚杆锁定内外钢带围箍和竖向贯穿钢筋为主,聚丙烯酸脂乳液砂浆裂缝注浆为辅的砖石古塔综合抗震加固措施。(3)砖石古塔塔底截面为承载能力抗震薄弱部位,抗拉能力不足是导致塔体破坏的主要原因。(4)地震作用下,砖石古塔随着塔体层数的增加,层间位移角增大,顶层塔体为变形能力薄弱部位。该研究结果可为砖石古塔的抗震性能评估与抗震加固提供参考。  相似文献   

3.
The ultimate strain value for rocks in aggregate with their other physicomechanical characteristics plays a substantial role when solving different problems related to the bearing capacity and behavior of soils. These include determination of the maximum displacement, velocity, and acceleration values of soils during earthquakes and estimation of the potential strain energy accumulated in a medium during strong earthquake preparation. The latter parameter is also key in predicting earthquakes from the ultimate strain of rocks. The paper describes a technique developed by the author for determining the ultimate strain of soil columns under natural conditions from their relative slope on the surface after a strong earthquake. The empirical dependences of the ultimate strain of rocks on earthquake magnitude, relative slip, rupture length, and the seismic moment are obtained by analyzing their values calculated by the proposed method for 44 strong earthquakes with magnitudes of 5.6–8.5. A comparative analysis of the ultimate strain values obtained by other researchers by geodesic triangulation is performed.  相似文献   

4.
Load and resistance factor design (LRFD) approach for the design of reinforced soil walls is presented to produce designs with consistent and uniform levels of risk for the whole range of design applications. The evaluation of load and resistance factors for the reinforced soil walls based on reliability theory is presented. A first order reliability method (FORM) is used to determine appropriate ranges for the values of the load and resistance factors. Using pseudo-static limit equilibrium method, analysis is conducted to evaluate the external stability of reinforced soil walls subjected to earthquake loading. The potential failure mechanisms considered in the analysis are sliding failure, eccentricity failure of resultant force (or overturning failure) and bearing capacity failure. The proposed procedure includes the variability associated with reinforced backfill, retained backfill, foundation soil, horizontal seismic acceleration and surcharge load acting on the wall. Partial factors needed to maintain the stability against three modes of failure by targeting component reliability index of 3.0 are obtained for various values of coefficients of variation (COV) of friction angle of backfill and foundation soil, distributed dead load surcharge, cohesion of the foundation soil and horizontal seismic acceleration. A comparative study between LRFD and allowable stress design (ASD) is also presented with a design example.  相似文献   

5.
高烈度地震区重力式挡土墙由于地基承载力不足导致墙身失稳是一种较常见震害类型。基于拟静力法原理,利用极限分析上限定理对地震作用下挡土墙地基极限承载力进行求解,通过典型算例分析了极限承载力随地震动峰值加速度的变化关系与机理,讨论了地基土强度参数对其变化趋势的影响,提出了同时考虑设防烈度和地基土性的挡土墙地基抗震容许承载力修正方法及相应修正系数取值建议。结果表明:设防烈度在9度及以内时,随着地震动峰值加速度增加,挡土墙地基极限承载力近似呈线性下降,下降速率与地基土黏聚力呈负相关性,而受内摩擦角的影响不显著;地震作用加剧挡土墙基底荷载倾斜与偏心导致地基破坏区缩减是造成极限承载力下降的主要原因;设防烈度大于7度时,挡土墙地基抗震容许承载力较天然工况下有所降低,8度和9度设防烈度对应的修正系数约为0.9和0.7。  相似文献   

6.
采用Nishiumi算法分析地震作用下混合桥结合段的极限承载力时,未考虑贯穿钢筋对混合桥结合段剪力键承载力的影响作用,分析出的极限承载力结果与实际结果差异较大。提出新的地震作用下混合桥结合段的极限承载力分析方法。通过分析计算得到栓钉类剪力键和钢筋混凝土柱类剪力键的极限承载力,设计新的极限承载力分析试验,通过设计剪力键试件、试件地震加载和试验测试点安置和测试内容安排,分析地震作用下混合桥结合段剪力键的极限承载力。分析结果说明,所提方法可准确分析地震作用下混合桥结合段剪力键的极限承载力,且分析得到的极限承载力结果与实测结果几乎一致,误差不超过7%。  相似文献   

7.
In a seismic design, the dynamic loads are generally dependent on the inertial interaction caused by earthquake. But for the foundations embedded in soil, the dynamic loads are influenced by both the inertial and kinematic interactions among superstructure, foundation and soil. Especially, when a foundation is embedded in soft surface ground, the effects due to the kinematic interaction increase and should be considered in seismic design. For this reason, a method called seismic deformation method (SDM), which is suitable for an intensive earthquake motion (level 2 earthquake motion), has been stipulated recently in a new design code called Seismic Design Code for railway structures (the Railway Code, drawn up by Railway Technical Research Institute, Japan, 1999) [Railway Technical Research Institute. Seismic Design Code for railway structures. Tokyo: Maruzen; 1999]. In order to grasp the suitability of the SDM to actual structures, pile foundations, which experienced the Hyogoken-Nanbu earthquake, were taken as the objects for investigations. Comparison studies between the SDM analysis and reconnaissance were conducted. As a result, the adequacy of the SDM to actual foundations was confirmed to prove good agreement between the two results from the viewpoint of engineering practice.In addition, determination of indices for seismic-performance evaluation and speculation of damage mechanism of the foundations are also discussed in this paper.  相似文献   

8.
Based on a Chinese national high arch dam located in a meizoseismal region, a nonlinear numerical analysis model of the damage and failure process of a dam-foundation system is established by employing a 3-D deformable distinct element code(3DEC) and its re-development functions. The proposed analysis model considers the dam-foundation-reservoir coupling effect, infl uence of nonlinear contact in the opening and closing of the dam seam surface and abutment rock joints during strong earthquakes, and radiation damping of far fi eld energy dissipation according to the actual workability state of an arch dam. A safety assessment method and safety evaluation criteria is developed to better understand the arch dam system disaster process from local damage to ultimate failure. The dynamic characteristics, disaster mechanism, limit bearing capacity and the entire failure process of a high arch dam under a strong earthquake are then analyzed. Further, the seismic safety of the arch dam is evaluated according to the proposed evaluation criteria and safety assessment method. As a result, some useful conclusions are obtained for some aspects of the disaster mechanism and failure process of an arch dam. The analysis method and conclusions may be useful in engineering practice.  相似文献   

9.
根式基础作为一种新型变截面结构形式,已被证明对于提高沉井基础与桩基础的竖向及横向承载力有明显影响,但其对挖井基础抗震性能的改善作用尚不明确。为明确根键对挖井基础桥墩承载力特征的影响,对一铁路根式挖井基础桥墩进行拟静力试验,研究其滞回曲线与骨架曲线特性,通过建立符合试验的有限元模型,讨论不同根键参数对挖井基础桥墩耗能能力及承载力的影响。结果表明根键的存在充分带动了周围土体的参与度,可大大提高挖井基础桥墩的承载力,且随着墩顶位移荷载的增加承载力呈非线性增加。试验及数值模拟均表明:根式挖井基础的破坏主要是由基础周围的土体失效引起的,基础自身并未发生损坏;增加根键的长度可以明显提高根式挖井基础桥墩的承载能力与耗能能力;当根键之间的间距大于根键自身宽度时,增宽根键可明显提高根式挖井基础桥墩的承载能力与耗能能力,而当根键的间距小于自身宽度时,加宽根键对承载力的影响不明显;增加根键的数量能明显提高根式挖井基础桥墩的承载力;在基础底部布置根键的效果并不弱于在侧壁布置,且根键布置在侧壁时不宜靠近土体表面。研究成果可为根式挖井基础在我国铁路桥梁中的应用提供科学依据。  相似文献   

10.
抗拔承载力是桩基设计的重要组成部分,随着海上风电场的建设,海洋工程中出现了越来越多需要提供足够抗拔力的抗拔桩。现有规范中桩基抗拔承载力的计算来源于对抗压承载力的修正,理论研究成果也仅限于半经验法及极限平衡算法,因此与实测数据存在较大差异。系统阐述现有的桩基抗拔承载力计算方法,并结合实际工程计算桩基的抗拔承载力,对比各种计算方法的结果发现:黏土中API规范法计算的桩基上拔承载力更接近实测值;Meyerhof和Das算法适合计算长径较小的桩;Chattopadhyay和Shanker算法适用于砂土中抗拔桩的计算;现有抗拔承载力计算方法忽略了黏土中的黏附力和负孔隙水压力,导致计算结果与实测值偏差较大。  相似文献   

11.
地震时砌体结构窗间墙易发生破坏,为了提高其抗震性能,对高宽比为1的2组共4片墙体,其中:2片为双层打包带加固墙体,2片为原墙,进行了拟静力试验,研究墙体的破坏形态、水平承载力、滞回曲线和耗能等抗震性能。试验发现原墙发生剪切破坏,加固后墙体发生摇摆破坏,加固改变了墙体破坏模式,加固后墙体滞回曲线饱满但有捏笼,破坏荷载、延性和耗能能力都有提高,破坏时未发生剥离,表明双层打包带加固法有效地提高了窗间墙体抗震性能,对承受较大竖向应力墙体效果更好,建议加固时要加强加固层与窗下和窗上墙体的连接。  相似文献   

12.
In performance-based geotechnical earthquake engineering, the required degree and spatial extent of ground densification for mitigation of liquefaction beneath a structure should be determined based on the acceptable levels of performance of foundation. Currently, there is no solution for evaluation of the amount of settlement and tilt of footings constructed on a densified ground which is surrounded by a liquefiable soil. This implies the need for numerical procedures for simulation of seismic behavior of shallow foundations supported on both liquefiable and densified subsoil. In this paper, the dynamic response of shallow foundations on a densified ground is studied using a 3D fully coupled dynamic analysis. For verification of the numerical model, simulation of a series of centrifuge experiments has been carried out and the results were compared with the experimental measurements. After verification of the numerical model, a comprehensive parametric study has been performed to develop a methodology for estimating the effectiveness of subsoil densification in reducing liquefaction-induced settlement of shallow foundations. Range of problem variables were considered in a way that the possibility of bearing capacity failure is low enough. The proposed methodology can be utilized for development of a performance-based design procedure for liquefaction hazard mitigation by soil densification.  相似文献   

13.
采用集中塑性铰理论和SAP2000结构分析软件,对某体育练习馆(钢柱周边支承单层柱面网壳)整体结构进行了强震下弹塑性地震响应分析。分析中考虑了几何和材料双重非线性影响,获得了节点位移响应、杆件塑性铰的分布特征和结构的整体变形与失效形态,并评定了整体结构在强震下的极限承载力与失效类型。结果表明:该结构在强震下的失效界限地震加速度峰值为1260gal,最大竖向变形为短向跨度的1/163,满足"避难与救灾建筑结构"的抗震性能设防要求;结构的失效类型为动力失稳破坏,临界失效时出现塑性铰的杆件较少,结构塑性发展程度不充分;由整体稳定控制的单层柱面网壳在满足稳定承载力的要求下具有较大的抗震潜能。  相似文献   

14.
220 kV变电站建筑在电网系统中地位非常重要,其承载能力安全性,尤其是其抗震能力,对电网系统稳定有决定性影响。为评估变电站结构抗震承载能力,明确其倒塌机理,从而为新建变电站结构抗震设计提供技术支撑。以国家电网江苏公司220 kV标准变电站结构为例,选取3条地震波,采用弹塑性时程法,分析结构在不同地震波不同输入方式下的响应。研究结果发现:三向地震波输入下变电站结构地震响应很大;结构的损伤、失效主要发生于结构薄弱部位;现有220 kV变电站结构的抗震承载力不高,鉴于其重要程度,其安全度应增强。  相似文献   

15.
It is widely known that the bearing capacity of a shallow foundation is reduced when the foundation is subjected to rocking moments and horizontal loads during an earthquake event. Analytical solutions generally require an assumption to be made of the kinematic failure mechanism in the soil, when the true failure mechanism is unknown. This paper discusses a series of experiments carried out on a new 1g shaking table at Cambridge University in order to measure the displacements of a shallow foundation due to seismic loading and also the development of the failure mechanism within the soil. The failure mechanism was studied using the technique of Particle Image Velocimetry (PIV), combined with high-speed videography and photogrammetry. In this paper, the failure mechanisms observed in these experiments will be compared with the theoretical results found from upper- and lower-bound solutions and the effects of such parameters as earthquake magnitude, frequency and embedment ratio (and hence surcharge) will be discussed.  相似文献   

16.
Many bridges located in seismic hazard regions suffer from serious foundation exposure caused by riverbed scour. Loss of surrounding soil significantly reduces the lateral strength of pile foundations. When the scour depth exceeds a critical level, the strength of the foundation is insufficient to withstand the imposed seismic demand, which induces the potential for unacceptable damage to the piles during an earthquake. This paper presents an analytical approach to assess the earthquake damage potential of bridges with foundation exposure and identify the critical scour depth that causes the seismic performance of a bridge to differ from the original design. The approach employs the well-accepted response spectrum analysis method to determine the maximum seismic response of a bridge. The damage potential of a bridge is assessed by comparing the imposed seismic demand with the strengths of the column and the foundation. The versatility of the analytical approach is illustrated with a numerical example and verified by the nonlinear finite element analysis. The analytical approach is also demonstrated to successfully determine the critical scour depth. Results highlight that relatively shallow scour depths can cause foundation damage during an earthquake, even for bridges designed to provide satisfactory seismic performance.  相似文献   

17.
基于“强柱弱梁”的屈服机制,依据能量平衡方法设计了某6层RC框架结构,采用震级-震中距条带地震动记录选取方法,选取12条随机地震动,利用Perform-3D有限元分析软件对结构进行增量动力(IDA)分析,得到了结构的地震易损性曲线、破坏状态概率曲线以及结构破坏概率矩阵。分析结果表明:该方法设计的结构能够形成预设的“强柱弱梁”屈服机制,可以保证结构中梁充分参与耗能,同时结构具有较强的抗倒塌能力,可以满足“小震不坏,中震可修,大震不倒”的性能要求。  相似文献   

18.
李科峰 《华南地震》2019,39(3):83-88
大多数地震破裂面源检测方法都是通过简化地震震源,将地震震源表示成线源或者点源,无法有效描述地震带地震破裂面源产状和大小,不适用地震震级较大的情况下地震危险性检测。因此提出基于数学建模的潜在地震破裂面源检测方法,在地震震级较大时仍能检测出地震危险性概率。选取适宜的地震基岩水平峰值加速度衰减关系,分析地震震级、破裂长度、破裂宽度相互关系,确定地震引起的潜在地震破裂面源大小,计算给定地震动小于在场点处产生地震动的概率,将该概率同地震动加速度衰减关系结合,得到地震动年超越概率,分析地震危险性。经过实验检测发现,所提方法检测出的年超越概率与峰值加速度、最大震级有关,该概率能精准表示地震带地震破裂面源产状和大小,说明该方法检测地震危险性是合理的。  相似文献   

19.
为探究局部锈蚀矩形截面钢筋混凝土(RC)桥墩重度震损加固后的抗震性能,本文对拟静力破坏后的6个矩形截面RC桥墩试件进行扩大截面加固。通过加载试验,对加固桥墩试件从破坏形态、滞回特性、水平承载力、位移延性、侧向刚度以及耗能等方面进行了系统分析。结果表明:相比于普通箍筋,横向施加预应力的改进扩大截面加固方式对破坏后桥墩试件的抗震性能修复成效更佳;在同等位移幅值下,锈蚀率不断增大,桥墩试件抗震性能呈现逐渐降低的趋势;钢筋锈蚀位置上移,加固后桥墩试件的抗震性能提升;轴压比加大,加固后桥墩试件承载力和侧向刚度增大,但延性降低。  相似文献   

20.
文章在对宁夏区域典型经济承载体的抽样调查的基础上,根据以往南北地震带地震中建筑物的震害经验和震害统计研究,对宁夏典型房屋建筑进行了计算分析,得出了宁夏区域房屋建筑的震害矩阵,初步总结了宁夏典型经济承载体的抗震能力分区特征,明确了宁夏城区当前建筑物存在的薄弱环节,确定宁夏不同分区的房屋建筑结构类型,给出了城区建筑物抗震能力综合评价,最后提出了提高建筑物抗震能力的抗震措施。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号