共查询到20条相似文献，搜索用时 15 毫秒
1.
Earthquakes in Kenya are common along the Kenya Rift Valley because of the slow divergent movement of the rift and hydrothermal processes in the geothermal fields. This implies slow but continuous radiation of seismic energy, which relieves stress in the subsurface rocks. On the contrary, the NW-SE trending rift/fault zones such as the Aswa-Nyangia fault zone and the Muglad-Anza-Lamu rift zone are the likely sites of major earthquakes in Kenya and the East African region. These rift/fault zones have been the sites of a number of strong earthquakes in the past such as the M w = 7.2 southern Sudan earthquake of 20 May 1990 and aftershocks of M w = 6.5 and 7.1 on 24 May 1990, the 1937 M s = 6.1 earthquake north of Lake Turkana close to the Kenya-Ethiopian border, and the 1913 M s = 6.0 Turkana earthquake, among others. Source parameters of the 20 May 1990 southern Sudan earthquake show that this earthquake consists of only one event on a fault having strike, dip, and rake of 315°, 84°, and ?3°. The fault plane is characterized by a left-lateral strike slip fault mechanism. The focal depth for this earthquake is 12.1 km, seismic moment M o = 7.65 × 1019 Nm, and moment magnitude, M w = 7.19 (?7.2). The fault rupture started 15 s earlier and lasted for 17 s along a fault plane having dimensions of ?60 km × 40 km. The average fault dislocation is 1.1 m, and the stress drop, ?σ, is 1.63 MPa. The distribution of historical earthquakes (M w ≥ 5) from southern Sudan through central Kenya generally shows a NW-SE alignment of epicenters. On a local scale in Kenya, the NW–SE alignment of epicenters is characterized by earthquakes of local magnitude M l ≤ 4.0, except the 1928 Subukia earthquake (M s = 6.9) in central Kenya. This NW–SE alignment of epicenters is consistent with the trend of the Aswa-Nyangia Fault Zone, from southern Sudan through central Kenya and further southwards into the Indian Ocean. We therefore conclude that the NW–SE trending rift/fault zones are sites of strong earthquakes likely to pose the greatest earthquake hazard in Kenya and the East African region in general. 相似文献
2.
In 2001, a special issue of the Bulletin of the Seismological Society of America (BSSA) featured seismological research for the 1999 Chi–Chi Taiwan earthquake. This study uses source parameters suggested by the first author in this special issue to estimate static stress drop associated with the Chi–Chi earthquake. The waveform simulation method was used to carefully examine these source parameters. The simulation results indicate that source parameters, inferred from near-fault observations, are well determined. According to the rupture area and slip, the static stress drops (Δσs) obtained were distributed between a small value of 47 bars near the epicentral region and a much larger value (>200 bars) to the north. Similar trends in dynamic stress drop (Δσd) were also recognized by the first author in his paper published in 2001 BSSA special issue. Comparing the Δσs with Δσd, satisfies the relation Δσs/Δσd ≈ 1. This relation suggests that fault motion is mostly spent releasing seismic wave energy during the rupture process of the Chi–Chi earthquake. The consistency between static and dynamic stress drops thus provides a measure of energy-moment (Es/M0) ratios, which range from 9.0 × 10−5 to 6.5 × 10−4. The average Es/M0 ratio estimated for the northern portions of the fault is 3.4 × 10−4, which is about 3 times that of the south. Such a high Es/M0 ratio can be interpreted as having low strength in the rupture for the northern portions of the fault, where the fault would release less energy per unit rupture surface to create the new rupture. 相似文献
3.
The statistical analysis of the source parameters of 9 earthquake sets of different types (aftershocks, scattered events, swarms) and of different seismic regions shows that the density distribution function (ddf) of the linear dimension l of a fault is represented by a negative power law, as well as the ddf of the static stress drop σ and of the scalar seismic moment Mo. It is then suggested, and tentatively verified, that also the ddf of the root mean square ground acceleration, defined as a function of l and σ, may be represented by a negative power law and that, at least in the cases examined, it scales like the ddf of σ. It is seen that the variability of the static stress drop is significant from one region to another, as is well known, but it seems remarkable also in the same seismic region (in particular in California, σ varies by several orders of magnitude) and in the different sets of events of a given region (as observed again for California). It is hypothesized that a correlation, although weak, between the stress drop and the linear dimension of a fault exists and the analyses seem not to contradict that σ may be a decreasing function of l. Finally, it is suggested that the seismicity of a region may be represented two-dimensionally as a function of the ddf of the stress drop and of the linear dimension of a fault instead of the classic b and bo values. 相似文献
4.
Late-Quaternary Slip Rate and Seismic Activity of the Xianshuihe Fault Zone in Southwest China 总被引：1，自引：1，他引：0
The Xianshuihe fault zone is a seismo-genetic fault zone of left-lateral slip in Southwest China. Since 1725, a total of 59 Ms ≥ 5.0 earthquakes have occurred along this fault zone, including 18 Ms 6.0–6.9 and eight Ms ≥ 7.0 earthquakes. The seismic risk of the Xianshuihe fault zone is a large and realistic threat to the western Sichuan economic corridor. Based on previous studies, we carried out field geological survey and remote sensing interpretation in the fault zone. In addition, geophysical surveys, trenching and age-dating were conducted in the key parts to better understand the geometry, spatial distribution and activity of the fault zone. We infer to divide the fault zone into two parts: the northwest part and the southeast part, with total eight segments. Their Late Quaternary slip rates vary in a range of 11.5 mm/a –(3±1) mm/a. The seismic activities of the Xianshuihe fault zone are frequent and strong, periodical, and reoccurred. Combining the spatial and temporal distribution of the historical earthquakes, the seismic hazard of the Xianshuihe fault zone has been predicted by using the relationship between magnitude and frequency of earthquakes caused by different fault segments. The prediction results show that the segment between Daofu and Qianning has a possibility of Ms ≥ 7.0 earthquakes, while the segment between Shimian and Luding is likely to have earthquakes of about Ms 7.0. It is suggested to establish a GPS or In SAR-based real-time monitoring network of surface displacement to cover the Xianshuihe fault zone, and an early warning system of earthquakes and post seismic geohazards to cover the major residential areas. 相似文献
5.
Assuming a relation of “b” to stress state, the possibility of globe-wide stress variation and transmission was investigated. The NOAA earthquake data file served to determine the temporal change in “b” of log N = a − bM from 1963 to 1975.Periods of six to eight years are observed in the b-values (stress pattern) for most circum-Pacific areas (South America, Tonga, Kermadec, New Hebrides, Kamchatka and Eastern Aleutians).In the Kurils, fore- and aftershock sequences of large earthquakes seem to mask any characteristic global pattern that might exist. These sequences exhibit low b-values (high stress) through the time of foreshocks and early stages of aftershocks, followed by rapid increase in b-values (decrease in stress).Use of a worldwide earthquake data file clearly yields less resolution of the temporal “b” variation than the use of local network studies published by other authors.Incidental to the study, 1124 earthquakes of the NOAA data file yield the Ms − mb relations: Ms = 1.16mb − 0.835 for 4.5 mb 6 and: log10Ms = 0.1432mb − 0.0629 formb > 6 with correlative coefficients of 0.994 and 0.992 respectively. 相似文献
6.
2022年1月8日青海门源MS 6.9地震发生在青藏高原东北缘的祁连山断块内部,仪器震中位于海原活动断裂系西段的冷龙岭断裂带上,是该断裂系自1920年海原8.5级大地震后再次发生M>6.5的强震。考察结果的初步总结表明,此次门源地震产生了呈左阶斜列分布、总长度近23 km的南北两条破裂,在两者之间存在长约3.2 km、宽近2 km的地表破裂空区。南支破裂(F1)出现在托来山断裂的东段,走向91°,长约2.4 km,以兼具向南逆冲的左旋走滑变形为主,最大走滑位移近0.4 m。北支主破裂(F2)出现在冷龙岭断裂的西段,总长度近20 km,以左旋走滑变形为主,呈整体微凸向北东的弧形展布,包含了走向分别为102°、109°和118°的西、中、东三段,最大走滑位移出现在中段,为3.0±0.2 m。此外,在北支主破裂中—东段的北侧新发现一条累计长度约7.6 km、以右旋正断为主的北支次级破裂(F3),累计最大走滑量约0.8 m,最大正断位移约1.5 m。综合分析认为,整个同震破裂以左旋走滑变形为主,具有双侧破裂特点,宏观震中位于北支主破裂的中段,其地表走滑位移很大可能与震源破裂深度浅有关,其中的右旋正断次级破裂可能是南侧主动盘向东运移过程中拖曳北侧块体发生差异运动所引起的特殊变形现象。印度与欧亚板块近南北向强烈碰撞挤压导致南祁连断块沿海原左旋走滑断裂系向东挤出,从而引发该断裂系中的托来山断裂与冷龙岭断裂同时发生破裂,成为导致此次强震的主要动力机制。在此大陆动力学背景下,以海原左旋走滑断裂系为主边界的祁连山断块及其周边的未来强震危险性需得到进一步重视。 相似文献
7.
The source mechanism of the Saitama earthquake (36.07°N,139.40°E, Ms = 5.4) of July 1, 1968, is studied on the basis of P-wave first motion, aftershock, long-period surface-wave data and low-magnification long-period seismograms recorded in the nearfield. A precise location of the aftershocks is made using P and S—P time data obtained by a micro-earthquake observatory network. The synthetic near-field seismograms based on the Haskell model are directly compared with the observed near-field seismograms for wave form and amplitude to determine the dynamic fault parameters. The results obtained are as follows: source geometry, reverse dip slip with considerable right-lateral strike-slip component; dip direction, N6°E; dip angle 30°; fault dimension, 10 × 6 km2; rupture velocity, 3.4 km/sec in the direction S30°E; average dislocation, 92 cm; average dislocation velocity, 92 cm/sec; seismic moment, 1.9 · 1025 dyn-cm; stress drop, 100 bar. The effective stress is about the same as the stress drop. For major earthquakes in the Japanese Islands, the dislocation velocity, .D, is found to be proportional to the stress drop, σ. This relation can be expressed by .D - (β/μ)σ, where β is the shear velocity and μ is the rigidity. This result has an importance in engineering seismology because the stress drop scales the seismic motion in the vicinity of an earthquake fault. 相似文献
8.
The source process and parameters for a moderate earthquake of magnitude Ml 4.1 that occurred on the Kalabsha fault at the Aswan area are analyzed. The derived focal mechanisms of this event and other two aftershocks using polarities of P, SV, and SH waves show strike-slip fault with minor vertical movement of normal type. The solutions give two nodal planes trending ENE–WSW and NNW–SSE in close agreement with the surface traces of the faults crossing the area. The movement is right lateral along the first plane while left lateral along the second one. The rupture process characterization of this event has been investigated by using the empirical Green’s function deconvolution method. By inversion only for the P wave part of the records of these three events (main and other two aftershocks), the source time function for the master events and the azimuthally variations in the (RSTF) pulse amplitude are retrieved for estimating the rupture directivities. The estimated rupture direction is combined with the P-wave focal mechanisms for the three events to identify the fault plane solution for these earthquakes. Based on the width, amplitudes, and numbers of the isolated source time functions, a complex bi-lateral rupture of the studied earthquake is delineated. The source parameters of the master event is calculated and the derived corner frequencies f o for P-wave spectra show a value of 6.6 Hz; the seismic moment (M o ) is 4.2?×?1022 Nm; the average displacement (U) is 0.5 m; fault radius (r) 40 m; the average value of the stress drops (Δσ) is 0.6 Mpa, and the moment magnitude (M w ) is 4.4. 相似文献
9.
Tokutaro Hatori 《GeoJournal》1996,38(3):313-319
The regional characteristics of tsunami magnitudes in the SE Asia region are discussed in relation to earthquake magnitudes during the period from 1960 to 1994. Tsunami magnitudes on the Imamura-Iida scale are investigated by the author's method (Hatori 1979, 1986) using the data of inundation heights near the source area and tide-gauge records observed in Japan. The magnitude values of the Taiwan tsunamis showed relatively to be small. On the contrary, the magnitudes of tsunamis in the vicinities of the Philippines and Indonesia exceed more than 1–2 grade (tsunami heights: 2–5 times) compared to earthquakes with similar size on the circum-Pacific zone. The relation between tsunami magnitude, m, and earthquake magnitude, M
s, is expressed as m = 2.66 M
s– 17.5 for these regions. For example, the magnitudes for the 1976 Mindanao tsunami (M
s= 7.8, 3702 deaths) and the 1992 Flores tsunami (M
s= 7.5, 1713 deaths) were determined to be m = 3 and m = 2.5, respectively. The focal depth of tsunamigenic earthquakes is shallower thand< 36 km, and the detectively of tsunamis is small for deep earthquakes being d > 40 km. For future tsunamis, it is indispensable to take precautions against shallow earthquakes having the magnitudes M
s> 6.5. 相似文献
10.
We investigate spatial clustering of 2414 aftershocks along the Izmit Mw = 7.4 August 17, 1999 earthquake rupture zone. 25 days prior to the Düzce earthquake Mw = 7.2 (November 12, 1999), we analyze two spatial clusters, namely Sakarya (SC) and Karadere–Düzce (KDC). We determine the earthquake frequency–magnitude distribution (b-value) for both clusters. We find two high b-value zones in SC and one high b-value zone in KDC which are in agreement with large coseismic surface displacements along the Izmit rupture. The b-values are significantly lower at the eastern end of the Izmit rupture where the Düzce mainshock occurred. These low b-values at depth are correlated with low postseismic slip rate and positive Coloumb stress change along KDC. Since low b-values are hypothesized with high stress levels, we propose that at the depth of the Düzce hypocenter (12.5 km), earthquakes are triggered at higher stresses compared to shallower crustal earthquake. The decrease in b-value from the Karadere segment towards the Düzce Basin supports this low b-value high stress hypothesis at the eastern end of the Izmit rupture. Consequently, we detect three asperity regions which are correlated with high b-value zones along the Izmit rupture. According to aftershock distribution the half of the Düzce fault segment was active before the 12 November 1999 Düzce mainshock. This part is correlated with low b-values which mean high stress concentration in the Düzce Basin. This high density aftershock activity presumably helped to trigger the Düzce event (Mw = 7.2) after the Izmit Mw 7.4 mainshock. 相似文献
11.
Evidence of right‐lateral offsets associated with the 1912 earthquake (Mw 7.4) along the North Anatolian Fault (Gaziköy–Saros segment) allow us to survey (using DGPS) the co‐seismic and cumulative slip distribution. The damage distribution and surface breaks related with the earthquake show an elongated zone of maximum intensity (X MSK) parallel to the fault rupture on land but this may extend offshore to the north‐east and south‐west. Detailed mapping of the fault using topographic maps and aerial photographs indicates the existence of pull‐apart basins and pressure ridges. At several localities, the average 1912 offset along strike is 3.5–4 m and cumulative slip is 2–6 times that of individual movement. The fault rupture geometry and slip distribution suggest the existence of three subsegments with a combined total length of 110–120 km, a fault length and maximum slip similar to those of the 1999 Izmit earthquake. The amount of slip at the north‐easternmost section and in the coastal region of the Sea of Marmara reaches an average 4 m, thereby implying the offshore extension of the 1912 rupture. The results suggest that the 1912 event generated up to 150 km of surface faulting, which would imply a Mw 7.2–7.4 earthquake and which, added with rupture lengths of the 1999 earthquakes, help to constrain the remaining seismic gap in the Sea of Marmara. 相似文献
12.
Source parameters of the ML 4.1 earthquake of November 08, 2006, southeast Beni-Suef, northern Egypt
A. Badawy A.K. Abdel-Fattah Sh. M. Ali W. Farid 《Journal of African Earth Sciences》2008,51(3):151-159
In the early morning hours on Wednesday November 08, 2006 at 04:32:10(GMT) a small earthquake of ML 4.1 has occurred at southeast Beni-Suef, approximately 160 km SEE of Cairo, northern Egypt. The quake has been felt as far as Cairo and its surroundings while no casualties were reported. The instrumental epicentre is located at 28.57°N and 31.55°E. Seismic moment is 1.76 E14 Nm, corresponding to a moment magnitude Mw 3.5. Following a Brune model, the source radius is 0.3 km with an average dislocation of 1.8 cm and a 2.4 MPa stress drop. The source mechanism from a first motion fault plane solution shows a left-lateral strike-slip mechanism with a minor dip-slip component along fault NNW striking at 161°, dipping 52° to the west and rake −5°. Trend and plunging of the maximum and minimum principle axes P/T are 125°, 28°, 21°, and 23°, respectively. A comparison with the mechanism of the October, 1999 event shows similarities in faulting type and orientation of nodal planes.Eight small earthquakes (3.0 ML < 5.0) were also recorded by the Egyptian National Seismological Network (ENSN) from the same region. We estimate the source parameters and fault mechanism solutions (FMS) for these earthquakes using displacement spectra and P-wave polarities, respectively. The obtained source parameters including seismic moments of 4.9 × 1012–5.04 × 1015 Nm, stress drops of 0.2–4.9 MPa and relative displacement of 0.1–9.1 cm. The azimuths of T-axes determined from FMS are oriented in NNE–SSW direction. This direction is consistent with the present-day stress field in Egypt and the last phase of stress field changes in the Late Pleistocene, as well as with recent GPS measurements. 相似文献
13.
A simple method is developed to determine seismic moments of earthquakes. The method is qualified through criteria such as simplicity of calculations, coverage of wide magnitude range, and insensitivity to detailed instrumental response. The method is applied to 163 major earthquakes which occurred underneath Japan and the Japan Sea in the time from 1926 to 1977. Magnitudes of these earthquakes, which have been determined by the Japan Meteorological Agency, (MJMA) cover the range from 4.3 to 7.5. At first, source spectra are analyzed through a very simple way introducing two new parameters: characteristic period Tc and seismic-moment factor Mc. The former is defined as an average value of apparent periods of seismic waves with the maximum trace amplitude at many stations. The latter is an average of products of maximum trace amplitude and its apparent period multiplied by epicentral distance. It is shown that Tc corresponds to the period of the corner frequency of an earthquake and Mc to the seismic-moment density at the period of Tc. A scaling model of earthquake source spectra is presented which satisfies the empirical relations between the surface-wave magnitude Ms and MJMA, and MJMA and the body-wave magnitude mb. Those relations are independent of the Gutenberg and Richter relation between Ms and mb, because MJMA is determined from maximum amplitudes of seismic waves with a period of about 4 sec. The static seismic moment of each earthquake can be estimated from calculated Mc using the source spectra of the scaling model. Seismic moments of 18 earthquakes determined by conventional analyses from near- and/or far-field observations are consistent with static seismic moments thus estimated over the range from 2 × 1023 to 3 × 1027 dyne cm. This shows the potential in practice of the present method, especially in the routine processing of seismic data. 相似文献
14.
据中国地震台网测定，2021年5月21日21时48分在云南省大理州漾濞县发生MS6.4地震，及时查明此次地震的发震构造及震源破裂特征，可为认识该区孕震条件和判别未来强震危险性提供关键依据。采用双差定位方法对漾濞地震序列进行重新定位，得到3863次地震事件的精确震源位置。结果显示:漾濞地震序列整体呈北西—南东向分布，长约25 km；整体走向135°；MS6.4主震震中位置为25.688°N，99.877°E；震源深度约9.6 km。综合地震序列深度剖面和震源机制解结果可知，发震断层应为北西走向、整体向西南方向陡倾的右旋走滑断层，倾角具有自北西向南东逐渐变缓的趋势。进一步分析地震序列的时空演化过程发现，该地震具有典型的"前震-主震-余震型"地震序列活动特点，其破裂过程主要包括3个阶段。破裂成核阶段:首先在发震断层10~12 km深度处相对脆弱部位产生小尺度破裂，之后失稳加速破裂，发生MS5.6地震；主震破裂阶段:在构造应力场持续加载和周围小尺度破裂的共同影响下，促使浅部较高强度断层闭锁区破裂，形成MS6.4主震；尾端拉张破裂阶段:主震破裂向东南扩展过程中，在东南端形成与之呈马尾状斜交的、具有正断性质的次级破裂，并产生MS5.2余震。而且此次地震还在源区北东侧触发了北北东向的左旋走滑破裂。综合分析认为，漾濞地震是兰坪-思茅地块内部北西向草坪断裂在近南北向区域应力挤压作用下发生右旋走滑运动的结果，具有明显的新生断裂特征。近年来兰坪-思茅地块内部一系列中强地震的发生表明，青藏高原物质向东南持续挤出的过程中，遇到该地块的阻挡，正在导致地块内部早期断层贯通形成新的活动断裂。因此，川滇地块西南边界带上或相邻地块内部老断层的复活和新生断裂的产生是区域中强地震危险性分析评价中值得关注的重要课题，同时建议需重视未来该区中强地震进一步向东南和向北的迁移或扩展的可能性。 相似文献
15.
The surface-wavemagnitudes Ms are determined for 30 great shallow earthquakes that occurred during the period from 1953 to 1977. The determination is based on the amplitude and period data from all available station bulletins, and the same procedure as that employed in Gutenberg and Richter's “Seismicity of the Earth” is used. During this period, the Chilean earthquake of 1960 has the largest Ms, 8.5. The surface-wave magnitudes listed in “Earthquake Data Reports” are found to be higher than Ms on the average. By using the same method as that used by Gutenberg, the broad-band body-wave magnitudes mB are determined for great shallow shocks for the period from 1953 to 1974. mB is based on the amplitudes of P, PP and S waves which are measured on broadband instruments at periods of about 4–20 s. The 1-s body-wave magnitudes listed in “Bulletin of International Seismological Center” and “Earthquake Data Reports” are found to be much smaller than mB on the average. Through the examination of Gutenberg and Richter's original worksheets, the relation between mB and Msis revised to mB = 0.65 Ms+ 2.5 which well satisfies the mg and Msdata for Msbetween 5.2 and 相似文献
16.
Quantitative relations of seismic source parameters and a classification of earthquakes 总被引：1，自引：0，他引：1
G Purcaru 《Tectonophysics》1982,84(1):57-128
17.
Bálint Süle 《Central European Journal of Geosciences》2010,2(4):475-480
Dynamic source parameters are estimated from P-wave displacement spectra for 18 local earthquakes (1.2 < ML < 3.7) that occurred in two seismically active regions of Hungary between 1995 and 2004. Although the geological setting of the two areas is quite different, their source parameters cannot be distinguished. The source dimensions range from 200 to 900 m, the seismic moment from 6.3x1011 to 3.48×1014 Nm, the stress drop from 0.13 to 6.86 bar, and the average displacement is less than 1 cm for all events. The scaling relationship between seismic moment and stress drop indicates a decrease in stress drop with decreasing seismic moment. A linear relationship of M w = 0.71 M L + 0.92 is obtained between local magnitude and moment magnitude. 相似文献
18.
We present the estimated source parameters from SH-wave spectral modeling of selected 463 aftershocks (2002–06) of the 26 January 2001 Bhuj earthquake, the well-recorded largest continental intraplate earthquake. The estimated seismic moment (Mo), corner frequency (fc), source radius (r) and stress drop (Δσ) for aftershocks of moment magnitude 1.7 to 5.6 range from 3.55×1011 to 2.84×1017 N-m, 1.3 to 11.83 Hz, 107 to 1515 m and 0.13 to 26.7 MPa, respectively, while the errors in fc and Δσ are found to be 1.1 Hz and 1.1 MPa, respectively. We also notice that the near surface attenuation factor (k) values vary from 0.02 to 0.03. Our estimates reveal that the stress drop values show more scatter (Mo0.5 to 1 is proportional to Δσ) toward the larger Mo values (≥1014.5 N-m), while they show a more systematic nature (Mo3 is proportional to Δσ) for smaller Mo values (<1014.5 N-m), which can be explained as a consequence of a nearly constant rupture radius for smaller aftershocks in the region. The large stress drops (= 10 MPa) associated with events on the north Wagad fault (at 15–30 km depth) and Gedi fault (at 3–15 km depth) can be attributed to the large stress developed at hypocentral depths as a result of high fluid pressure and the presence of mafic intrusive bodies beneath these two fault zones. 相似文献
19.
Constraints on the location and mechanism of the 1511 Western-Slovenia earthquake from active tectonics and modeling of macroseismic data 总被引：4，自引：1，他引：4
The 1511 Western Slovenia earthquake (M = 6.9) is the largest event occurred so far in the region of the Alps–Dinarides junction. Though it strongly influences the regional seismic hazard assessment, the epicenter and mechanism are still under debate. The complexity of the active tectonics of the Alps–Dinarides junction is reflected by the presence of both compressional and transpressional deformations. This complexity is witnessed by the recent occurrence of three main earthquake sequences, the 1976 Friuli thrust faulting events, the 1998 Bovec–Krn Mountain and the 2004 Kobarid strike-slip events. The epicenters of the 1998 and 2004 strike-slip earthquakes (Ms = 5.7 and Ms = 4.9, respectively) lie only 50 km far from the 1976 thrust earthquake (Ms = 6.5).We use the available macroseismic data and recent active tectonics studies, to assess a possible epicenter and mechanism for the 1511 earthquake and causative fault. According with previous works reported in the literature, we analyze both a two-and a single-event case, defining several input fault models. We compute synthetic seismograms up to 1 Hz in an extended-source approximation, testing different rupture propagations and applying a uniform seismic moment distribution on the fault segments. We extract the maximum horizontal velocities from the synthetics and we convert them into intensities by means of an empirical relation. A rounded-to-integer misfit between observed and computed intensities is performed, considering both a minimized and a maximized databases, built to avoid the use of half-degree macroseismic intensity data points. Our results are consistent with a 6.9 magnitude single event rupturing 50 km of the Idrija right-lateral strike-slip fault with bilateral rupture propagation. 相似文献
20.
We have conducted dynamic rupture propagation experiments to establish the relations between in-source stress drop, fracture energy and the resulting particle velocity during slip of an unconfined 2 m long laboratory fault at normal stresses between 4 and 8 MPa. To produce high fracture energy in the source we use a rough fault that has a large slip weakening distance. An artifact of the high fracture energy is that the nucleation zone is large such that precursory slip reduces fault strength over a large fraction of the total fault length prior to dynamic rupture, making the initial stress non-uniform. Shear stress, particle velocity, fault slip and acceleration were recorded coseismically at multiple locations along strike and at small fault-normal distances. Stress drop increases weakly with normal stress. Average slip rate depends linearly on the fault strength loss and on static stress drop, both with a nonzero intercept. A minimum fracture energy of 1.8 J/m2 and a linear slip weakening distance of 33 μm are inferred from the intercept. The large slip weakening distance also affects the average slip rate which is reduced by in-source energy dissipation from on-fault fracture energy.Because of the low normal stress and small per event slip (∼86 μm), no thermal weakening such as melting or pore fluid pressurization occurs in these experiments. Despite the relatively high fracture energy, and the very low heat production, energy partitioning during these laboratory earthquakes is very similar to typical earthquake source properties. The product of fracture energy and fault area is larger than the radiated energy. Seismic efficiency is low at ∼2%. The ratio of apparent stress to static stress drop is ∼27%, consistent with measured overshoot. The fracture efficiency is ∼33%. The static and dynamic stress drops when extrapolated to crustal stresses are 2–7.3 MPa and in the range of typical earthquake stress drops. As the relatively high fracture energy reduces the slip velocities in these experiments, the extrapolated average particle velocities for crustal stresses are 0.18–0.6 m/s. That these experiments are consistent with typical earthquake source properties suggests, albeit indirectly, that thermal weakening mechanisms such as thermal pressurization and melting which lead to near complete stress drops, dominate earthquake source properties only for exceptional events unless crustal stresses are low. 相似文献