首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 296 毫秒
1.
Mechanical Nature of Gravity and Tectonic Forces   总被引:2,自引:0,他引:2  
There are two models of ultrahigh pressure metamorphism (UHPM) zone in Dabie: the model of under thrusting-returning which even arrives at the mantle and the superimposed model of tectonics in the crust. There are two points of view in the argument about formation depth of ultrahigh pressure metamorphism: (1) the depth can be calculated by hydrostatic equation; (2) the high pressure was composed of gravity, tectonic and other forces instead of merely gravity force. Some misunderstandings of mechanical conceptions presented in the paper showing the hydrostatic viewpoints should be open to question. The main conceptions are: (1) the confining pressure was only formed by gravity, and the differential stress was only formed by tectonic force; (2) the differential stress is not big enough to lead to form ultrahigh pressure metamorphism; (3) once tectonic overpressure goes beyond the limited strength of rocks the tectonic force would disappear and the rocks would be broken or rheomorphied at the same time. A short discussion in basic mechanics is made in this paper for a perfect process for discussing the argument.  相似文献   

2.
1 Introduction The pressure, a scalar quantity, is defined as P = F/S (F is force, S is the area for F) which can be widely used for both solid and fluid. The formula P = g ρh (g-gravitation acceleration,ρ-density, h-depth) is only used for even density static solid and fluid. The delivery of pressure in the fluid follows the law of Pascal, and the average pressure of uneven density fluid can be calculated with the formula of P = g ρh. The temperature influence on pressure is notHU Ba…  相似文献   

3.
Hydrocarbon distribution rules in the deep and shallow parts of sedimentary basins are considerably different, particularly in the following four aspects. First, the critical porosity for hydrocarbon migration is much lower in the deep parts of basins: at a depth of 7000 m, hydrocarbons can accumulate only in rocks with porosity less than 5%. However, in the shallow parts of basins (i.e., depths of around 1000 m), hydrocarbon can accumulate in rocks only when porosity is over 20%. Second, hydrocarbon reservoirs tend to exhibit negative pressures after hydrocarbon accumulation at depth, with a pressure coefficient less than 0.7. However, hydrocarbon reservoirs at shallow depths tend to exhibit high pressure after hydrocarbon accumulation. Third, deep reservoirs tend to exhibit characteristics of oil (–gas)–water inversion, indicating that the oil (gas) accumulated under the water. However, the oil (gas) tends to accumulate over water in shallow reservoirs. Fourth, continuous unconventional tight hydrocarbon reservoirs are distributed widely in deep reservoirs, where the buoyancy force is not the primary dynamic force and the caprock is not involved during the process of hydrocarbon accumulation. Conversely, the majority of hydrocarbons in shallow regions accumulate in traps with complex structures. The results of this study indicate that two dynamic boundary conditions are primarily responsible for the above phenomena: a lower limit to the buoyancy force and the lower limit of hydrocarbon accumulation overall, corresponding to about 10%–12% porosity and irreducible water saturation of 100%, respectively.  相似文献   

4.
The palynomorph assemblage of lake sediments younger than 51.9 kaBP from Wulagai Gobi in Inner Mongolia was analyzed to reconstruct the vegetation and climate.From 51.9 to 30.6kaBP,the vegetation was arid to semi-arid grassland with only slight changes.According to the palynomorphs,trees and shrubs were very rare.The large number and diversity of algae indicate the presence of a lake.Quantitative climatic conditions were reconstructed using the Best Analogues Method.The results indicate that the annual mean temperature was higher than that at present.The combination of temperature and annual precipitation suggests a change in the climate from cool dry to warm dry and then cool humid.Our results show that the annual precipitation values were mostly higher than that at present but were lower than 400 mm.It infers that the study area was already within the arid to semi-arid regions but with a stronger influence of the summer monsoon during 51.9to 30.6 kaBP than at present.With slight differences mainly in time scale,the changing trend of the annual temperature curve is consistent with the other climatic records from Antarctica,Greenland,Hulu Cave(East China),and the Tibetan Plateau during the last glacial period.From 30.6 kaBP to present,very few palynomorphs were detected in the samples.Hence,no information about the vegetation and climate could be extracted.Combined with other studies during Late Pleistocene,we presume that the reason for the lack of pollen during this period was caused by an abrupt temperature fall after 30.6 kaBP or that the lacustrine conditions were unsuitable for pollen deposition.It was probably incurred by the oxidation on land prior to deposition.But for those samples only with algae,it might be caused by the fact that algae could finish their life history in a very short time in a seasonal lake.  相似文献   

5.
Retrogressive landslides are common geological phenomena in mountainous areas and on onshore and offshore slopes. The impact of retrogressive landslides is different from that of other landslide types due to the phenomenon of retrogression. The hazards caused by retrogressive landslides may be increased because retrogressive landslides usually affect housing, facilities, and infrastructure located far from the original slopes. Additionally, substantial geomorphic evidence shows that the abundant supply of loose sediment in the source area of a debris flow is usually provided by retrogressive landslides that are triggered by the undercutting of water. Moreover, according to historic case studies, some large landslides are the evolution result of retrogressive landslides. Hence the ability to understand and predict the evolution of retrogressive landslides is crucial for the purpose of hazard mitigation. This paper discusses the phenomenon of a retrogressive landslide by using a model experiment and suggests a reasonably simplified numerical approach for the prediction of rainfall-induced retrogressive landslides. The simplified numerical approach, which combines the finite element method for seepage analysis, the shear strength reduction finite element method, and the analysis criterion for the retrogression and accumulation effect, is presented and used to predict the characteristics of a retrogressive landslide. The results show that this numerical approach is capable of reasonably predicting the characteristics of retrogressive landslides under rainfall infiltration, particularly the magnitude of each landslide, the position of the slip surface, and the development processes of the retrogressive landslide. Therefore, this approach is expected to be a practical method for the mitigation of damage caused by rainfall-induced retrogressive landslides.  相似文献   

6.
As the basal group of Polypodiales, the specific taxonomy of Dicksoniaceae is still being debated. As aquantitative analysis method, numerical taxonomy has been applied to the taxonomic study of many plant families andgenera in recent years due to its simplicity and high accuracy. However, the numerical analysis of the Dicksoniaceae fossilshas not been reported at present. In the present study, the pinnule morphological data of 42 Mesozoic fossil species of theDicksoniaceae were analyzed using cluster analysis, principal component analysis and correlation analysis. The resultsrevealed that 42 taxonomic units could be divided into six representative groups, which are consistent with the traditionaltaxonomy. After screening, an identification key on 28 fossil species of four genera with a definite taxonomic position wasestablished. According to the quantitative analysis, a Bayes discriminant model was established for the selected species.Lastly, the model was tested using the morphological data of the fossil pinnules in Dicksoniaceae from the YaojieFormation, suggesting that the discriminant model is accurate to a certain extent. As a result, the numerical taxonomy canbe applied to the classification of the Dicksoniaceae fossils.  相似文献   

7.
The purpose of this study is to establish a 3D groundwater flow modelling for evaluating groundwater resources of the North China Plain.First,the North China Plain was divided into three aquifers vertically through a characterization of hydrogeological conditions.Groundwater model software GMS was used for modeling to divide the area of simulation into a regular network of 164 rows and 148 lines.This model was verified through fitting of the observed and the simulated groundwater flow fields at deep and shallow layers and comparison between the observed and simulated hydrographs at 64 typical observation wells.Furthermore,water budget analysis was also performed during the simulation period(2002-2003).Results of the established groundwater flow model showed that the average annual groundwater recharge of the North China Plain during 1991 to 2003 was 256.68×10~8 m~3/yr with safe yield of groundwater resources up to 213.49×10~8 m~3/yr,in which safe yield of shallow groundwater and that of deep groundwater was up to 191.65×10~8 m~3/yr and 22.64×10~8 m~3/yr respectively.Finally,this model was integrated with proposal for groundwater withdrawal in the study area after commencement of water supply by South-North Water Transfer Project,aiming to predict the changing trend of groundwater regime.As indicated by prediction results,South-North Water Transfer Project,which is favorable for effective control of expansion and intensification of existing depression cone,would play a positive role in alleviation of short supply of groundwater in the North China Plain as well as maintenance and protection of groundwater.  相似文献   

8.
The vibration analysis of a plate on an elastic foundation is an important problem in engineering. It is the interaction of a plate with the three-dimensional half space and the plate is usually loaded from both the upper and lower surfaces. The contact pressure from the soil can not be predefined. According to Lambs solution for a single oscillating force acting on a point on the surface of an elastic half space, and the relevant approximation formulae, a relation between the local pressure and the deflection of the plate has been proposed. Based on this analysis, the reaction of the soil can be represented as the deformation of the plate. Therefore, the plate can be separated from the soil and only needs to be divided by a number of elements in the analysis. The following procedure is the same as the standard finite element method. This is a semi-analytical and semi-numerical method. It has been applied to the dynamic analysis of circular or rectangular plates on the elastic half space, at low or high frequency vibration, and on rigid, soft or flexible foundations. The results show that this method is versatile and highly accurate.  相似文献   

9.
The origin and distribution of formation overpressure have effect not only on hydrocarbon migration and accumulation, but also on technique of drilling well. The study and prediction of overpressure are very important in basin analysis. At present, overpressure is mostly predicted by stack velocity.The process in calculating inter-velocity from stack velocity is very complex and inevitably leads to errors. Especially, this method is not available in the case that structural compression contribution to overpressure occurred. This paper introduces a new method, impedance inversion, to predict overpressure,and the principle is discussed. This method is used to predict the overpressure in Kuqa depression, Tarim basin and as a result, the absolute errors are less than 0.1, and relative errors are less than 5% for predicted fluid pressure coefficients to the drill stem test (DST) measurements. It suggests that this method can be widely used to predict overpressure in foreland basins.  相似文献   

10.
Finite volumes of magma moving in confinement, store hydraulic potential energy for the generation,control and transmission of power. The Pascal's principle in a hydraulic jack arrangement is used to model the vertical and lateral growth of sills. The small input piston of the hydraulic jack is equivalent to the feeder dike, the upper large expansible piston equivalent to the magmatic chamber and the inertial force of the magma in the dike is the input force. This arrangement is particularly relevant to the case of sills expanding with blunt tips, for which rapid fracture propagation is inhibited. Hydraulic models concur with experimental data that show that lateral expansion of magma into a sill is promoted when the vertical ascent of magma through a feeder dike reaches the bottom contact with an overlying, flat rigid-layer. At this point, the magma is forced to decelerate, triggering a pressure wave through the conduit caused by the continued ascent of magma further down(fluid-hammer effect). This pressure wave can provide overpressure enough to trigger the initial hydraulic lateral expansion of magma into an incipient sill, and still have enough input inertial force left to continue feeding the hydraulic system. The lateral expansion underneath the strong impeding layer, causes an area increase and thus, further hydraulic amplification of the input inertial force on the sides and roof of the incipient sill, triggering further expansion in a self-reinforcing process. Initially, the lateral pressure increase is larger than that in the roof allowing the sill to expand. However, expansion eventually increases the total integrated force on the roof allowing its uplift into either a laccolith, if the roof preserves continuity, or into a piston bounded by a circular set of fractures. Hydraulic models for shallow magmatic chambers, also suggest that laccolith-like intrusions require the existence of a self-supported chamber roof. In contrast, if the roof of magmatic chambers loses the self-supporting capacity, lopoliths and calderas should be expected for more or less dense magmas, respectively, owing to the growing influence of the density contrast between the host rock and the magma.  相似文献   

11.
朱建明  林庆涛  高晓将  高林生 《岩土力学》2016,37(12):3417-3426
目前关于临近地下室外墙影响的挡土墙空间土压力的计算理论的研究还比较少,原有的平面应变条件下的理论不能满足挡土墙的长高比B/H较小时的挡土墙土压力计算要求。通过将土拱效应原理引入顾慰慈[8]建立的空间土压力计算模型,建立了考虑土拱效应的临近地下室外墙影响的空间土压力计算模型,根据挡土墙和地下室外墙的间距与土体破裂面状态的关系将该模型分为3种情况,并将各模型划分为Ⅰ、Ⅱ、Ⅲ、Ⅳ四个区域,通过在各个区域内取水平微分单元体,建立各微分单元体的水平和竖向静力平衡方程,推导出了各区相应的挡土墙空间主动土压力计算公式,该公式可以计算出墙背任意位置的主动土压力;并提出了空间土压力合力及其合力作用点的计算方法。通过算例计算可以直观地看出挡土墙后主动土压力的空间分布,由此可以看出,当空间效应存在时,考虑土拱效应的挡土墙主动土压力沿墙长的分布与平面应变条件时有很大的不同,此时挡土墙两端附近区域的主动土压力远小于平面应变条件下计算出的主动土压力,同时可以看出,考虑空间效应的挡土墙主动土压力合力作用点要比平面应变条件下的位置要高,挡土墙长高比B/H越小,空间效应对主动土压力沿墙长的分布和主动土压力合力作用点位置的影响越大。  相似文献   

12.
挡土墙主动土压力的库仑统一解   总被引:6,自引:1,他引:5  
彭明祥 《岩土力学》2009,30(2):379-386
基于极限平衡理论,视墙后填土为服从Mohr-Coulomb屈服准则的理想弹塑性材料,指出库仑土压力理论存在的一些缺陷,明确提出极限土压力是由墙后塑性土体产生,并假定塑性区的一族滑移线为直线,即平面滑裂面,建立了更为完善的滑楔分析模型,求解了在一般情况下考虑黏性土作用的挡土墙主动土压力、滑裂面土反力以及它们的分布,而经典库仑和朗肯主动土压力为其特例。  相似文献   

13.
徐鹏  蒋关鲁  王宁  雷涛  王智猛 《岩土力学》2018,39(11):4010-4016
自加筋土出现以来,由面板、筋材、填土组成的加筋土挡墙被广泛研究并应于道路、铁路等土建工程中。填土的压实对加筋土挡墙的变形、土压力及筋材拉力等影响显著。为研究填土相对密实度对加筋土挡墙的影响,进行了3组不同相对密实度的离心模型试验,通过试验数据分析得到以下结论:相对密实度越大,墙体变形越小,特别是加载期变形量;压实可增大面板附近土体约束,使水平土压力大于设计值;试验挡墙设计较保守,筋材填土界面摩擦系数小于设计值;筋材面板之间连接拉力分析表明,连接拉力实测值小于测试土压力。  相似文献   

14.
黄睿  汤金焕 《岩土力学》2020,41(8):2564-2572
为考虑挡墙位移效应对地震土压力的影响,依据前人试验研究的结论,将摩擦角表示为与挡墙位移量和位置高度相关的函数,然后基于拟动力法和水平层分析法,推导得出RT位移模式下的地震非极限主动土压力和合力作用点的计算表达式。计算模型可描述摩擦角沿着墙高逐渐发展的不同非极限位移状态工况,并建立了挡墙位移、地震动荷载和土压力之间的相互联系。参数分析讨论了振动时间、挡土墙位移状态、地震加速度参数和土体摩擦角对地震主动土压力分布、合力大小以及合力作用点高度的影响。相比于传统的极限状态地震土压力理论,所提方法更合理地描述了地震土压力随挡墙位移的发展过程,对发展非极限土压力理论和改进边坡工程中的抗震计算方法具有一定的参考意义。  相似文献   

15.
张国祥 《岩土力学》2014,299(2):334-338
采用旋转挡土墙计算模型的变换法,将在地震和拟静力法条件下主动土压力的求解问题转化为在静力条件下主动土压力的求解问题。根据在静力条件下水平层分析法的主动土压力推导结果,直接获得在地震条件下主动土压力强度分布、土压力合力及其作用点位置的表达式,并运用图解法得到了临界破裂角的解析解。公式可考虑水平和垂直地震加速度、不同墙背倾角、墙背和坡面倾角与填料存在黏结力和外摩擦角、存在均布超载等诸多因素的影响,公式可以适用于在常用边界和地震条件下黏性土的主动土压力计算。旋转地震角法是将在地震和拟静力法条件下挡土墙计算模型旋转为在静力条件下挡土墙计算模型,但旋转挡土墙计算模型并不改变挡土墙和墙后填土的应力状态,按在静力条件下挡土墙主动土压力求解方法求解在地震和拟静力法条件下主动土压力,该方法大大简化了在地震和拟静力法条件下的主动土压力计算公式推导过程,统一了在拟静力法条件下的地震土压力求解,理论更加完善。  相似文献   

16.
刘新喜  李彬  王玮玮  贺程  李松 《岩土力学》2022,43(5):1175-1186
为了研究挡墙后有限土体的主动土压力,以墙后无黏性土体为研究对象,假定破裂面为通过墙踵的平面,且在挡墙平动模式下,墙后土体形成圆弧形小主应力拱。采用沿小主应力迹线分层的方法,将挡墙后土体划分为若干个圆弧形曲线薄层单元,考虑了单元体上下表面应力分布的不均匀性,提出了一种有限土体挡墙主动土压力计算方法,给出了主动土压力合力及其作用点高度的表达式,并验证了该方法的正确性。研究结果表明:采用曲线薄层单元法可以准确考虑单元体复杂的受力情况,能更好地反映挡墙后有限土体主动土压力的变化规律;有限填土时主动土压力沿墙高 呈非线性分布,土压力先随着土体深度增加呈单调递增趋势,然后在接近墙底位置处呈单调递减趋势。分析参数敏感性时取不同土体宽高比与墙背粗糙程度对挡墙主动土压力分布及合力作用点高度进行分析,结果表明:随着土体宽高比n的增大,主动土压力值逐渐增大,土压力分布曲线非线性越来越明显,合力作用点高度逐渐降低且恒大于 。当 0.71时,均趋于稳定。可将 0.71作为有限土体与半无限土体的临界宽高比。随着摩擦角 的增大,主动土压力值逐渐减小,土压力分布曲线非线性越来越明显,合力作用点高度逐渐增大且恒大于 。  相似文献   

17.
考虑粘聚力及墙背粘着力的主动土压力公式   总被引:12,自引:5,他引:12  
卢廷浩 《岩土力学》2002,23(4):470-473
考虑滑裂面上填土的粘聚力及填土与墙背接触面上的粘着力,推得了粘性填土挡墙上的主动土压力计算公式。可以应用程序按假定滑裂面的方式进行编程试算,从而确定主动土压力并确定滑裂面倾角,该法客观合理且实用方便,可保证足够的精度。也可以直接应用式(16)近似计算主动土压力。  相似文献   

18.
对库仑土压力理论的若干修正   总被引:1,自引:0,他引:1  
库仑土压力理论至今仍是计算土压力的重要方法而被人们所熟知。通过分析库仑土压力的墙后土楔体的受力特点,特别是深入研究了土楔体与墙的作用力关系,对库仑土压力理论给出了一些修正。认为土楔体和挡土墙之间的作用力(即定义的土压力),并非一定要达到极限状态,所以不能确定土压力的作用方向,但土压力的作用方向必须在其允许的角度范围之内。所以,认为库仑主动土压力为作用方向角度变化范围内的最大值,库仑被动土压力为作用方向角度变化范围内的最小值。对于墙后土楔体,认为墙体和土楔体是两个不同物体,土楔体的形成是因为土中产生潜在破裂面,而原库仑土压力理论要求墙体与土之间也达到临界状态是不必要的。墙体对土楔体的作用力(即土压力)实质就是相当于一物(墙)施加于另一物(土楔体)的力,即使土楔体滑动了,两物之间也并非要滑动。推导了主动土压力计算公式,给出了被动土压力的近似计算方案。算例证明,计算结果与原库仑理论有明显不同。该研究对库仑土压力的修正和求解值得引起重视。  相似文献   

19.
李厚恩  秦四清  孙强  马平 《岩土力学》2006,27(Z2):115-118
挡土墙在发生变形位移情况下的土压力计算在工程设计中有着重要的意义,而目前的理论不能对这一情况进行分析计算。在分析土压力随墙体位移变化而变化的规律的基础上,建立了能反映主动土压力和被动土压力的统一的考虑墙体位移的模型,并进行了研究分析,深化了对挡墙土压力的认识。  相似文献   

20.
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号