共查询到20条相似文献，搜索用时 140 毫秒
1.
2.
3.
2008年8月30日和静M_S5.6地震序列及震前部分测震学异常分析 总被引：2，自引：2，他引：0
简要介绍了2008年8月30日新疆和静MS5.6地震的基本参数、震源机制解、地震序列特征和局部构造应力场等,分析了地震前震源区周围及相关构造区域出现的中、短期地震活动异常特征。结果显示,该序列为主-余型,余震活动呈间歇式,衰减迅速,震源断错性质为走滑型。震前震源区东侧存在长时间4级地震平静、3级地震围空及多台地震波振幅比的异常等现象,同时在地震发生前1~3个月出现了短期异常,表现为振幅比异常的回返、空区瓦解和地震窗的异常。依据多种异常变化,在震前对该地震做出了三要素准确的短期预报。 相似文献
4.
5.
中国大陆活动地块与强震活动关系 总被引：16，自引：0，他引：16
研究了中国大陆各Ⅰ级活动地块区强震活动特点, 包括强震活动的总体水平、地震应变能释放速率、震级频度关系、震源破裂特性和地震应力场特征等, 以及由GPS资料给出的各活动地块运动变形特征, 如各地块运动的速度、地块变形的应变速率、最大主压应变方向、地块运动变形中的张、压状态等. 在此基础上, 对中国陆区Ⅰ级活动地块区的强震活动特点和地壳运动变形性状进行对比研究, 给出各活动地块的构造动力环境及其运动变形的性状决定其地震活动的总体状况, 包括: 活动地块现今地壳运动变形的应变速率与地震应变能释放呈线性相关; 由震源机制给出的各活动地块的地震应力场与由GPS观测给出的现今地壳运动应变(应力)场的同一性, 以及震源破裂类型与地壳形变张、压状态的一致性等. 这些结果显示了中国大陆活动地块及其运动性状对强震孕育发生的控制作用. 相似文献
6.
7.
本文收集了1976—2017年滇缅活动地块98个MW 4.8—7.0地震的震源机制解,分析震源机制解和震源深度的空间分布特征,探讨了其构造动力学背景。结果表明:①滇缅活动地块震源深度优势分布范围为10—30km,90%以上的地震震源深度小于30km,结合研究区统计时段内地震震源深度、优势度、众数等参数,推断滇缅活动地块及周边震源深度的下界为30km,脆性多震层位于10—30km,且主要位于15km附近;②滇缅活动块体不同断裂带、块体内部各次级块体之间、块体内外表现出不同的震源机制解,在空间上存在着明显的分区性特征,揭示出位于青藏高原东南缘的滇缅活动块体及周边地区应力场的非均匀性;③滇缅活动地块区域构造应力场明显受周边板块作用的控制,活动地块内部由于构造格局及其运动的差异,应力状态具有明显的区域特征。根据研究区各主要断裂带所反映的与构造背景作用一致的震源机制分布特征,可以将滇缅活动地块初步分为3个应力区。 相似文献
8.
9.
在南北地震带地区,USGS全球地震目录中存在一些震源深度大于30km的地震.这些地震的震源深度是否可靠,对于研究这一地区的孕震机制、岩石圈强度和构造演化等科学问题具有重要意义.本文以南北地震带2012年发生的5个4~5级地震为例,利用区域地震台网的波形数据,基于sPL深度震相、短周期瑞利面波以及CAP等独立方法测定了其震源深度.结果表明:sPL深度震相和CAP方法给出的震源深度比较一致,差别小于2~3km,能够得到比较可靠的震源深度;短周期瑞利面波及其与P波振幅比也确定了地震震源深度较浅的特征.本文研究结果显示:宁夏会宁4.7级、云南富民4.8级和四川会东4.7级地震的震源深度约为8~12km左右,仍为发生于上地壳的地震,USGS地震目录给出的30km甚至更深的震源深度存在明显偏差;对于四川隆昌4.6和4.9级地震,本文给出的震源深度为1~2km,属于极浅源地震,USGS地震目录给出的10km和35km的震源深度结果尚需进一步改进. 相似文献
10.
针对2020年2月3日四川青白江5.1级地震发生前的地震活动和地球物理观测异常、构造背景、震源物理参数,以及地震序列特征等进行系统总结。结果表明,青白江5.1级地震发生前存在小震调制比高值、地磁低点位移、重力固体潮高噪声等中短期异常;地震序列活动特征显示,此次地震为一次孤立型地震序列,序列参数计算结果与当前余震活动水平基本相符。另外,青白江地震发生在龙泉山断裂带上,震源机制计算结果显示为一次逆冲型破裂事件,与龙泉山断裂构造性质一致。同时,此次地震发生在四川盆地的少震弱震区,对于川滇及川滇藏交界地区后续7级以上地震的发生具有一定预测意义。 相似文献
11.
INTRODUCTIONEarthquake is the best information source for describingthe present_daytectonic zones and stressfield of the crust,which contains comprehensive and abundant geodynamic connotations.Theresearches on global earthquakes are important for the esta… 相似文献
12.
龙门山断裂带沿倾向和走向具有明显的分带性和分段性特征,通常以4条主干断裂为界将龙门山断裂带自西向东分为5条构造带,但是对沿走向的分段性特征仍未达成共识.本文利用四川区域地震台网记录的汶川地震后近10年的波形数据,采用全波形反演获取了龙门山断裂带1495个M≥3的震源机制解.通过“滑动窗”扫描方法提取不同地震类型的数量沿龙门山断裂带走向的变化曲线,据此将龙门山断裂带的震源区划分为S1—S9段.根据反演的震源机制解,进一步采用阻尼线性反演技术求取龙门山断裂带高分辨率的构造应力场信息,从地震类型、断面结构和构造应力场等角度探讨龙门山断裂带的分段性特征.结果表明:(1)地震类型存在明显的分段性特征.其中S1的逆冲型地震比例最高,S8的走滑型地震比例最高,S9的正断型地震比例最高.汶川地震后龙门山断裂带可能存在差异性断层调整运动,且余震晚期沿断裂带走向普遍存在应力的补充和协调,芦山地震的发生可能还对S2造成了应力扰动.汶川主震附近及余震区远端经历了更长的震后调整过程,且余震区远端S9具有更复杂、强度更高的震后调整过程.(2)断面结构存在明显的分段性特征.断面结构揭示汶川主震附近和余震区远端的隐伏断裂,以及虎牙断裂南端参与了汶川余震活动.断面倾角与走滑分量具有较好的一致性,在具有明显逆冲分量的分段断面倾角主要分布在50°~70°,而在具有明显走滑分量的分段断面倾角基本在60°以上,且断面倾角增大与汶川余震带宽度收缩变窄相吻合.(3)龙门山断裂带的应力环境非常复杂.σ1方向的分段性差异导致了汶川—芦山地震空区的地壳撕裂和地幔物质上涌、汶川主震附近和余震区远端的隐伏断裂活动以及虎牙断裂南端大量的逆冲型地震.结合构造应力场与大地测量资料认为,龙门山的隆升主要是受构造应力场作用下的上地壳缩短增厚所致. 相似文献
13.
本文根据青藏高原东北部强震震中分布、震源深度、地壳厚度和震源机制解等资料的分析、讨论了本区构造块体运移格局、强震分布特征和成带机理等问题。指出所论区内各断裂强震带是藏北地壳浅部块体物质在重力作用下向北东方向滑移造成的,并指出海源-天水-松潘强震活动带系属地壳结构型地震带而非断裂型地震带。 相似文献
14.
Introduction A great earthquake occurred on Sept. 25 of 1303 (Seventh of Dade, Yuan Dynasty) around Zhaocheng and Hongtong in Shanxi Province. The great earthquake is a very famous one, which is affirmed as the first earthquake with magnitude 8 in Chinese history. The catastrophes took place; meanwhile, huge archives of the disaster were recorded. According to these disaster recordings, the first isoseismal map in China was delineated, which provide us with abundant information of intensi… 相似文献
15.
欧亚地震带现代构造应力场及其分区特征 总被引：1，自引：0，他引：1
利用美国哈佛大学矩心矩张量目录中的2818个地震的震源机制解资料,分析了欧亚地震带及其5个分区现代构造应力场的基本特征,给出了5个分区的震源机制主压应力方向分布图。结果表明:①欧亚地震带以逆断型和走滑型断层活动为主;②地中海地震区以走滑断层活动为主,主压应力方向为SSW向;③伊朗—阿富汗—巴基斯坦地震区以逆断型断层活动为主,主压应力优势方向为NNE—NS向;④喜马拉雅地震以逆断型为主,主压应力优势方向为NS和NE向;⑤川—滇—缅地震区以走滑断层活动为主,主应力场方向为NNE向;⑥印度尼西亚地震区以逆断型断层活动为主,主压应力优势方向为NE—SSW向。各分区的主压应力方向明显受其所在区域板块运动的影响,由此推测板块运动可能是产生欧亚地震带构造应力的主要力源。 相似文献
16.
选用国家地震台网和区域台网的初至波P波初动符号资料,采用下半球等面积投影,用格点尝试法计算了2009年中国大陆27次MS4.5级以上地震的震源机制解。根据Zoback[1]研究全球应力场时的分类标准,对断层面解类型进行了分类。结果表明:走滑型(SS)地震13次,逆断层为主兼走滑(TS)8次,逆断层(TF)2次,正断层为主兼走滑(NS)3次,正断层(NF)1次。主压应力轴P轴方位的优势分布具有明显的区域特征,除东北地区有稍微的偏移,其余地区都与当地的背景构造应力场基本一致。 相似文献
17.
STUDY ON THE SEISMOGENIC FAULT AND DYNAMICS PARAME-TERS OF THE 2014 MS6.6 JINGGU EARTHQUAKE IN YUNNAN 
下载免费PDF全文
下载免费PDF全文 On October 17, 2014, a MS6.6 earthquake occurred in Jinggu, Yunnan. The epicenter was located in the western branch of Wuliang Mountain, the northwest extension line of Puwen Fault. There are 2 faults in the surrounding area, one is a sinistral strike-slip and the other is the dextral. Two faults have mutual intersection with conjugate joints property to form a checkerboard faulting structure. The structure of the area of the focal region is complex. The present-day tectonic movement is strong, and the aftershock distribution indicates the faulting surface trending NNW. There is no obvious surface rupture related to the known fault in the epicenter, and there is a certain distance from the surface of the Puwen fault zone. Regional seismic activity is strong. In 1941, there were two over magnitude 7.0 earthquakes in the south of the epicenter of Jinggu County and Mengzhe Town. In 1988, two mainshock-aftershock type earthquakes occurred in Canglan-Gengma Counties, the principal stress axes of the whole seismic area is in the direction of NNE. Geological method can be adopted to clarify the distribution of surficial fracture caused by active faults, and high-precision seismic positioning and spatial distribution characteristics of seismic sequences can contribute to understand deep seismogenic faults and geometric features. Thus, we can better analyze the three-dimensional spatial distribution characteristics of seismotectonics and the deep and shallow tectonic relationship. The focal mechanism reveals the property and faulting process to a certain extent, which can help us understand not only the active property of faults, but also the important basis for deep tectonic stress and seismogenic mechanism. In order to study the fault characteristic of the Jinggu earthquake, the stress field characteristics of the source area and the geometric parameters of the fault plane, this paper firstly uses the 15 days aftershock data of the Jingsuo MS6.6 earthquake, to precisely locate the main shock and aftershock sequences using double-difference location method. The results show that the aftershock sequences have clustering characteristics along the NW direction, with a depth mainly of 5~15km. Based on the precise location, calculations are made to the focal mechanisms of a total of 46 earthquakes including the main shock and aftershocks with ML ≥ 3.0 of the Jinggu earthquake. The double-couple(DC)component of the focal mechanism of the main shock shows that nodal plane Ⅰ:The strike is 239°, the dip 81°, and the rake -22°; nodal plane Ⅱ, the strike is 333°, the dip 68°, and the rake -170.31°. According to focal mechanism solutions, there are 42 earthquakes with a focal mechanism of strike-slip type, accounting for 91.3%. According to the distribution of the aftershock sequence, it can be inferred that the nodal plane Ⅱ is the seismogenic fault. The obtained focal mechanism is used to invert the stress field in the source region. The distribution of horizontal maximum principal stress orienation is concentrated. The main features of the regional tectonic stress field are under the NNE-SSW compression(P axis)and the NW-SE extension(T axis)and are also affected by NNW direction stress fields in the central region of Yunnan, which indicates that Jinggu earthquake fault, like Gengma earthquake, is a new NW-trending fault which is under domination of large-scale tectonic stress and effected by local tectonic stress environment. In order to define more accurately the occurrence of the fault plane of the Jinggu earthquake, with the precise location results and the stress field in the source region, the global optimal solution of the fault plane parameters and its error are obtained by using both global searching simulated annealing algorithm and local searching Gauss-Newton method. Since the parameters of the fault plane fitting process use the stress parameters obtained by the focal mechanism inversion, the data obtained by the fault plane fitting is more representative of the rupture plane, that is, the strike 332.75°, the dip 89.53°, and the rake -167.12°. The buried depth of the rupture plane is 2.746km, indicating that the source fault has not cut through the surface. Based on the stress field characteristics and the inversion results of the fault plane, it is preliminarily believed that the seismogenic structure of the Jinggu earthquake is a newly generated nearly vertical right-lateral strike-slip fault with normal component. The rupture plane length is about 17.2km, which does not extend to the Puwen fault zone. Jinggu earthquake occurred in Simao-Puer seismic region in the south of Sichuan-Yunnan plate. Its focal mechanism solution is similar to that of the three sub-events of the Gengma earthquake in November 1988. The seismogenic structure of both of them is NW-trending and the principal stress is NE-SW. The rupture plane of the Jinggu main shock(NW direction)is significantly different from the known near NS direction Lancang Fault and the near NE direction Jinggu Fault in the study area. It is preliminarily inferred that the seismogenic structure of this earthquake has a neogenetic feature. 相似文献
18.
19.
In this paper, we calculated the seismic pattern of instrumental recorded small and moderate earthquakes near the epicenter of the 1303 Hongtong M=8 earthquake, Shanxi Province. According to the spatial distribution of small and moderate earthquakes, 6 seismic dense zones are delineated. Temporal distribution of M L≥2 earthquakes since 1970 in each seismic dense zone has been analyzed. Based on temporal distribution characteristics and historical earthquake activity, three types of seismicities are proposed. The relationship between seismic types and crustal medium is analyzed. The mechanism of three types is discussed. Finity of strong earthquake recurrence is proposed. Seismic hazard in mid-long term and diversity of earthquake disaster in Shanxi seismic belt are discussed. 相似文献
20.
渤海海域地震震源深度的分布特征 总被引：3，自引：1，他引：2
震源深度的研究对于探索地震孕育和发生的深部环境,地震能量集结、释放的活动构造背景,以及地壳内部构造变形及其力学属性等都有非常重要的意义。本文选择渤海海域内观测精度相对较高的地震资料作为样本,统计分析了不同震级档、不同空间范围的震源深度分布特征,并初步探讨了震源深度与地震构造、地壳结构的关系。结果表明,渤海海域内中小震的震源深度在空间上的分布是不均匀的,发生在渤中断陷内的地震,其震源深度一般较深;而发生在山东半岛北部沿海与辽东半岛沿海的地震,其震级较低且震源一般较浅。但总体上,渤海海域内的地震多发生在10-20km的地壳中、上部,属浅源地震。 相似文献