共查询到19条相似文献，搜索用时 156 毫秒
1.
海洋拖缆主动源多道地震技术是应用于海洋天然气水合物资源调查的主要技术方法。不同于常规油气藏勘探,海底天然气水合物成藏机制复杂多样,海底似反射(Bottom Simulating Reflector,BSR)特征与水合物赋存并非完全对应。为提高海洋天然气水合物矿体识别的可靠性,地震属性技术在水合物资源调查中发挥着越来越重要的作用。本文对我国南海北部海域天然气水合物调查中的关键属性进行了对比、分析及筛选试验研究。试验针对海洋高分辨多道三维地震数据,采用三维地震层速度控制综合处理技术完成了BSR区域的成像,提取了与BSR相关的多种地震属性,并对BSR地震属性体的内部特性进行了分析,实现了BSR特征水合物矿体的识别,并提取了BSR上方和下部结合层带的地震属性。研究结果表明,在水合物赋存地层极其复杂的条件下,地震属性分析技术在海洋复杂浅地层水合物识别方面具有可行性和技术优势。 相似文献
2.
地震勘探是探测海底天然气水合物的重要手段,利用地震资料的诸多特征可以较好地识别海底天然气水合物,尤其是在识别似海底反射(BSR)方面发挥着重要作用.由于多次波等特征与BSR有很多相似之处,如果辨别不当就很容易被误认为是BSR,将会得出错误的结论.以我国某海域实际资料为例,从研究BSR的地震特征出发,指明多次波、气泡效应等多种假BSR现象,提出了利用精细速度分析、AVO特征分析、多次波压制等多种地震参数约束以识别真假BSR,进而提高海洋地震勘探精度,为寻找更多的海底天然气水合物提供技术保障. 相似文献
3.
《海洋地质前沿》2021,37(7)
仅利用地震似海底反射(BSR)识别琼东南盆地深水区天然气水合物存在一定的局限性,从而影响天然气水合物的勘探成效。笔者利用天然气水合物已钻井数据,分析该盆地深水区天然气水合物岩石弹性参数特征,用以查明天然气水合物的岩石物理规律;同时,利用地震正演模拟,明确了研究区发育的孔隙型、烟囱型水合物的地震反射特征。在此基础上,利用AVO正演判识真假BSR:天然气水合物底界面反射具有Ⅲ类AVO且存在AVO异常,此为真BSR反射;而块体流(MTD)底界面虽类似BSR反射,但其AVO为Ⅳ类且AVO无异常特征。利用宽频地震数据和三维地震速度体进行速度模型下的宽频确定性反演,并通过高速异常、高阻抗异常描述天然气水合物发育情况。总之,利用地震反射特征、AVO特征、无井宽频地震反演等手段,实现了琼东南盆地深水区多种类型天然气水合物的地震识别,判识圈定了水合物矿藏。 相似文献
4.
进入21世纪后,海域天然气水合物地球物理勘探取得了较大的进步。主要表现为,在勘探技术上已由单一的地震勘探发展到以地震勘探为主,重力、磁力勘探综合应用的格局;在地震勘探方法上,已由常规的单道、多道地震发展到多频地震、高分辨率二维、三维地震和海底多分量地震;在地震资料的处理上,已由常规处理发展到突出BSR特征的“三高”和叠前时间偏移处理;在天然气水合物的地震识别上,已由速度、振幅结构研究发展到多属性判别、多弹性参数和多物性参数反演。这些新技术、新方法的应用,加快了海域天然气水合物调查进度,提高了天然气水合物地球物理识别的可靠性。 相似文献
5.
大量研究表明南海北部珠江口盆地是天然气水合物发育区,但是该盆地东部揭阳凹陷水合物研究较少。本文利用揭阳凹陷新采集三维地震资料,对该三维地震资料进行成像道集优化和叠前时间偏移处理,得到针对水合物的新处理地震数据体,并通过高精度网格层析反演得到层速度数据体。利用该数据开展叠后约束稀疏脉冲反演,获得含天然气水合物地层波阻抗异常,综合分析反演与地震属性识别水合物。从新处理地震资料看,该区域似海底反射(bottom simulation reflection,BSR)反射呈连续、不连续与地层斜交等特征,BSR发育在一个继承性小型水道上,且下部断裂和气烟囱发育。通过分析BSR特征及BSR上下地层的速度、波阻抗、振幅、频率、相干等属性异常,结合水合物成藏条件,发现了南海北部新的天然气水合物有利富集区,为该区域水合物勘探提供基础。 相似文献
6.
7.
天然气水合物将成为21世纪的替代能源，地球物理方法是勘探天然气水合物的重要手段。本文比较全面地分析和总结了天然气水合物的各种地球物理识别技术以及地震资料的特殊处理和分析方法，详细地介绍了水平地震剖面、垂直地震剖面、测井以及旁侧声纳剖面上天然气水合物的表现和识别方法。特别地，针对海洋地震资料的特点以及天然气水合物在地震剖面上的识别标志BSR、振幅空白带等特征，文章引入了真振幅处理、子波处理以及多项式拟合等处理方法来提高天然气水合物识别标志在地震剖面上的显示效果。最后，为了全面了解海底天然气水合物的分布 以及微细结构，文章介绍了AVO分析、全波形反演速率分析、叠加速度分析和走时反演等正、反演技术。 相似文献
8.
地震勘探的BSR识别技术是发现海洋天然气水合物的最经济、快捷、方便、有效的方法.在地震处理识别上,对子波的精确处理是水合物地震资料处理中最关键的一个环节,采用最小平方误差准则,即利用实际输出与期望输出的误差平方和为最小的条件,来确定反滤波因子,因此又称为最小平方子波整形.在地震处理程序中引入三种期望输出,即俞氏子波、雷克子波、Buttworth子波,对子波零相位化有较好的效果.根据上面的原理,我们开发了一套最小平方反滤波地震处理软件,对天然气水合物地震勘探资料进行试处理的结果表明,该软件在提高分辨率的同时保持了较高的信噪比. 相似文献
9.
10.
11.
An analysis of 3D seismic data from the northwestern part of the Ulleung Basin, East Sea, revealed that the gas hydrate stability zone (GHSZ) consists of five seismic units separated by regional reflectors. An anticline is present that documents activity of many faults. The seismic indicators of gas hydrate occurrence included bottom simulating reflector (BSR) and acoustic blanking in the gas hydrate occurrence zone (GHOZ). By the analysis of the seismic characteristics and the gradient of the sedimentary strata, the GHOZ was divided into four classes: (1) dipping strata upon strong BSR, (2) dipping strata below strong BSR, (3) parallel strata with acoustic blanking, and (4) parallel strata below weak BSR. Seismic attributes such as reflection strength and instantaneous frequency were computed along the GHOZ. Low reflection strength and high instantaneous frequency were identified above the BSR, indicating the occurrence of gas hydrate. A remarkably high reflection strength and low instantaneous frequency indicated the presence of free gas below the BSR. Considering the distribution of the gas hydrate and free gas, two gas migration processes are suggested: (1) stratigraphic migration through the dipping, permeable strata and (2) structural migration from below the GHSZ along faults. 相似文献
12.
The bottom simulating reflector (BSR), the boundary between the gas hydrate and the free gas zone, is considered to be the most common evidence in seismic data analysis for gas hydrate exploration. Multiple seismic attribute analyses of reflectivity and acoustic impedance from the post-stack deconvolution and complex analysis of instantaneous attribute properties including the amplitude envelope, instantaneous frequency, phase, and first derivative of the amplitude of seismic data have been used to effectively confirm the existence of a BSR as the base of gas hydrate stability zone. In this paper, we consider individual seismic attribute analysis and integrate the results of those attributes to locate the position of the BSR. The outputs from conventional seismic data processing of the gas hydrate data set in the Ulleung Basin were used as inputs for multiple analyses. Applying multiple attribute analyses to the individual seismic traces showed that the identical anomalies found in two-way travel time (TWT) between 3.1 and 3.2 s from the results of complex analyses and l 1 norm deconvolution indicated the location of the BSR. 相似文献
13.
N. Satyavani 《Marine Georesources & Geotechnology》2013,31(3):191-201
The multichannel seismic data along one long-offset survey line from Krishna-Godavari (K-G) basin in the eastern margin of India were analyzed to define the seismic character of the gas hydrate/free gas bearing sediments. The discontinuous nature of bottom simulating reflection (BSR) was carefully examined. The presence of active faults and possible upward fluid circulation explain the discontinuous nature and low amplitude of the BSR. The study reveals free gas below gas hydrates, which is also indicated by enhancement of seismic amplitudes with offsets from BSR. These findings were characterized by computing seismic attributes such as the reflection strength and instantaneous frequency along the line. Geothermal gradients were computed for 18°C and 20°C temperature at the depth of BSR to understand the geothermal anomaly that can explain the dispersed nature of BSR. The estimated geothermal gradient shows an increase from 32°C/km in the slope region to 41°C/km in the deeper part, where free gas is present. The ray-based travel time inversion of identifiable reflected phases was also carried out along the line. The result of velocity tomography delineates the high-velocity (1.85–2.0 km/s) gas hydrate bearing sediments and low-velocity (1.45–1.5 km/s) free gas bearing sediments across the BSR. 相似文献
14.
《Marine and Petroleum Geology》2012,36(1):105-115
This article provides new constraints on gas hydrate and free gas concentrations in the sediments at the margin off Nova Scotia. Two-dimensional (2-D) velocity models were constructed through simultaneous travel-time inversion of ocean-bottom seismometer (OBS) data and 2-D single-channel seismic (SCS) data acquired in two surveys, in 2004 and 2006. The surveys, separated by ∼5 km, were carried out in regions where the bottom-simulating reflection (BSR) was identified in seismic reflection datasets from earlier studies and address the question of whether the BSR is a good indicator of significant gas hydrate on the Scotian margin. For both datasets, velocity increases by 200–300 m/s at a depth of approximately 220 m below seafloor (mbsf), but the results of the 2006 survey show a smaller velocity decrease (50–80 m/s) at the base of this high-velocity layer (310–330 mbsf) than the results of the 2004 survey (130 m/s). When converted to gas hydrate concentrations using effective medium theory, the 2-D velocity models for both datasets show a gas hydrate layer of ∼100 m thickness above the identified BSR. Gas hydrate concentrations are estimated at approximately 2–10% for the 2006 data and 8–18% for the 2004 survey. The reduction in gas hydrate concentration relative to the distance from the Mohican Channel structure is most likely related to the low porosity within the mud-dominant sediment at the depth of the BSR. Free gas concentrations were calculated to be 1–2% of the sediment pore space for both datasets. 相似文献
15.
16.
Cristián Rodrigo Antonio González-Fernández Emilio Vera 《Marine Geophysical Researches》2009,30(1):1-19
Multichannel seismic reflection data recorded between Arauco Gulf (37°S) and Valdivia (40°S), on the Chilean continental margin,
were processed and modeled to obtain seismic images and sub-surface models, in order to characterize the variability of the
bottom-simulating reflector (BSR), which is a geophysical marker for the presence of gas hydrates. The BSR is discontinuous
and interrupted by submarine valleys, canyons, as well as by faults or fractures. The BSR occurrence is more common south
of Mocha Island due to moderate slopes and greater organic matter contribution by rivers in that area. Tectonic uplift and
structural instability change the stability gas hydrate zone and consequently the BSR position, creating in some cases missing
or double BSRs. Our modeling supports the presence of gas hydrate above the BSR and free gas below it. Higher BSR amplitudes
support higher hydrate or free gas concentrations. In the study area, gas hydrate concentration is low (an average of 3.5%)
suggesting disseminated gas hydrate distribution within the sediments. Also higher BSR amplitudes are associated with thrust
faults in the accretionary prism, which serve as conduits for gas flow from deeper levels. This extra gas supply produces
a wider thickness of gas hydrates or free gas. 相似文献
17.
2D and 3D seismic reflection and well log data from Andaman deep water basin are analyzed to investigate geophysical evidence related to gas hydrate accumulation and saturation. Analysis of seismic data reveals the presence of a bottom simulating reflector (BSR) in the area showing all the characteristics of a classical BSR associated with gas hydrate accumulation. Double BSRs are also observed on some seismic sections of area (Area B) that suggest substantial changes in pressure–temperature (P–T) conditions in the past. The manifestation of changes in P–T conditions can also be marked by the varying gas hydrate stability zone thickness (200–650 m) in the area. The 3D seismic data of Area B located in the ponded fill, west of Alcock Rise has been pre-stack depth migrated. A significant velocity inversion across the BSR (1,950–1,650 m/s) has been observed on the velocity model obtained from pre-stack depth migration. The areas with low velocity of the order of 1,450 m/s below the BSR and high amplitudes indicate presence of dissociated or free gas beneath the hydrate layer. The amplitude variation with offset analysis of BSR depicts increase in amplitude with offset, a similar trend as observed for the BSR associated with the gas hydrate accumulations. The presence of gas hydrate shown by logging results from a drilled well for hydrocarbon exploration in Area B, where gas hydrate deposit was predicted from seismic evidence, validate our findings. The base of the hydrate layer derived from the resistivity and acoustic transit-time logs is in agreement with the depth of hydrate layer interpreted from the pre-stack depth migrated seismic section. The resistivity and acoustic transit-time logs indicate 30-m-thick hydrate layer at the depth interval of 1,865–1,895 m with 30 % hydrate saturation. The total hydrate bound gas in Area B is estimated to be 1.8 × 1010 m3, which is comparable (by volume) to the reserves in major conventional gas fields. 相似文献
18.
《Marine Geology》2001,172(1-2):1-21
In this paper we present and discuss the frequency-dependent behaviour of the acoustic characteristics of methane hydrate-bearing sediments in Lake Baikal, Siberia. Five different types of seismic sources (airgun-array, two types of single airguns, watergun and sparker) are used, encompassing a frequency bandwidth from 10 up to 1000 Hz. On low-frequency airgun-array data, the base of the hydrate stability zone (HSZ) is observed as a high-amplitude bottom-simulating reflection (BSR) with reversed polarity. The amplitude and continuity of the BSR decrease or even disappear on medium- to high-frequency data, a feature explained in terms of vertical and horizontal resolution. The increasing reflection amplitude of the BSR with increasing offset, the calculated reflection coefficient of the BSR and the occurrence of enhanced reflections below the BSR suggest the presence of free gas below the HSZ. The observation of some enhanced reflections extending above the BSR may be interpreted as an indication for free gas co-existing with hydrates within the HSZ. Amplitude blanking above the BSR is highly variable while the BSR itself appears to act as a low-pass frequency filter for medium- to high-frequency data.New single-channel airgun profiles provide the first seismic information across the Baikal Drilling Project (BDP-97) deep drilling site, at which hydrate-bearing sediments were retrieved at about 200 m above the base of the local HSZ. At the drilling site there are no seismic characteristics indicative of the presence of hydrates. Combination of the drilling and seismic information has allowed us to make a rough estimation of the volume of hydrates and carbon stored in the sediments of Lake Baikal, which lead us to conclude that the Lake Baikal gas hydrate reservoirs do not form a prospective energy resource. 相似文献
19.
AVO (Amplitude Versus Offset) is a seismic exploration technology applied to recognize lithology and detect oil and gas through analyzing the feature of amplitude variation versus offset. Gas hydrate and free gas can cause obvious AVO anomaly. To find geophysical evidence of gas hydrate and free gas in Shenhu Area, South China Sea, AVO attribute inversion method is applied. By using the method, the multiple seismic attribute profiles and AVO intercept versus gradient (I-G) cross plot are obtained. Bottom-simulating reflector (BSR) is observed beneath the seafloor, and the AVO abnormal responses reveal various seismic indicators of gas hydrate and free gas. The final AVO analysis results indicate the existence of gas hydrate and free gas in the upper and lower layers of BSR in the study area. 相似文献