共查询到20条相似文献，搜索用时 31 毫秒
1.
The driving response of thin‐walled open‐ended piles is studied using numerical simulation of the wave propagation inside the soil plug and the pile. An elastic finite element analysis is carried out to identify the stress wave propagation in the vicinity of the pile toe. It is found that the shear stress wave has the highest magnitude above the bottom of the soil plug. Below the bottom of the soil plug, the vertical stress wave has the highest magnitude. Although the shear stress wave propagating in the radial direction is similar in magnitude to the vertical stress wave at the bottom of the soil plug, it decays rapidly while travelling downwards. The highest vertical stress at the bottom of the soil plug appears after the vertical stress wave interacts with the shear stress wave travelling in the radial direction. Initially, the vertical stress wave propagates with the dilation wave velocity in both the radial and vertical directions. After it interacts with the shear stress wave, the vertical stress wave starts to propagate with the shear wave velocity in the radial direction and with the axial wave velocity downwards. It is concluded that at the bottom of the soil plug, the interaction between the waves travelling in radial and vertical directions is important. The capabilities of several one‐dimensional pile‐in‐pile models to reproduce the driving response given by a two‐dimensional axisymmetric finite element model is studied. It is seen that when the base of the soil plug fails, a one‐dimensional pile‐in‐pile model can be used to achieve results in agreement with the finite element model. However, when the pile is unplugged, where the base of the soil plug does not fail, a reduced finite element mesh that permits the radial wave propagation inside the soil plug must be used. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
2.
The dynamic response of an end bearing pile embedded in a linear visco‐elastic soil layer with hysteretic type damping is theoretically investigated when the pile is subjected to a time‐harmonic vertical loading at the pile top. The soil is modeled as a three‐dimensional axisymmetric continuum in which both its radial and vertical displacements are taken into account. The pile is assumed to be vertical, elastic and of uniform circular cross section. By using two potential functions to decompose the displacements of the soil layer and utilizing the separation of variables technique, the dynamic equilibrium equation is uncoupled and solved. At the interface of soil‐pile system, the boundary conditions of displacement continuity and force equilibrium are invoked to derive a closed‐form solution of the vertical dynamic response of the pile in frequency domain. The corresponding inverted solutions in time domain for the velocity response of a pile subjected to a semi‐sine excitation force applied at the pile top are obtained by means of inverse Fourier transform and the convolution theorem. A comparison with two other simplified solutions has been performed to verify the more rigorous solutions presented in this paper. Using the developed solutions, a parametric study has also been conducted to investigate the influence of the major parameters of the soil‐pile system on the vertical vibration characteristics of the pile. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
3.
This paper presents a non‐linear coupled finite element–boundary element approach for the prediction of free field vibrations due to vibratory and impact pile driving. Both the non‐linear constitutive behavior of the soil in the vicinity of the pile and the dynamic interaction between the pile and the soil are accounted for. A subdomain approach is used, defining a generalized structure consisting of the pile and a bounded region of soil around the pile, and an unbounded exterior linear soil domain. The soil around the pile may exhibit non‐linear constitutive behavior and is modelled with a time‐domain finite element method. The dynamic stiffness matrix of the exterior unbounded soil domain is calculated using a boundary element formulation in the frequency domain based on a limited number of modes defined on the interface between the generalized structure and the unbounded soil. The soil–structure interaction forces are evaluated as a convolution of the displacement history and the soil flexibility matrices, which are obtained by an inverse Fourier transformation from the frequency to the time domain. This results in a hybrid frequency–time domain formulation of the non‐linear dynamic soil–structure interaction problem, which is solved in the time domain using Newmark's time integration method; the interaction force time history is evaluated using the θ‐scheme in order to obtain stable solutions. The proposed hybrid formulation is validated for linear problems of vibratory and impact pile driving, showing very good agreement with the results obtained with a frequency‐domain solution. Linear predictions, however, overestimate the free field peak particle velocities as observed in reported field experiments during vibratory and impact pile driving at comparable levels of the transferred energy. This is mainly due to energy dissipation related to plastic deformations in the soil around the pile. Ground vibrations due to vibratory and impact pile driving are, therefore, also computed with a non‐linear model where the soil is modelled as an isotropic elastic, perfectly plastic solid, which yields according to the Drucker–Prager failure criterion. This results in lower predicted free field vibrations with respect to linear predictions, which are also in much better agreement with experimental results recorded during vibratory and impact pile driving. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
4.
软黏土中PHC管桩打入过程中土塞效应研究 总被引：1，自引：1，他引：0
当开口管桩打入土层中,土体进入桩内形成土塞,土塞效应对桩的打入特性和承载能力具有重要影响。基于上海典型软土地基中长PHC桩的现场试验,统计分析3个不同场地共44根桩打桩过程中的土塞数据,探讨软土地基中PHC桩打桩过程中土塞长度与内径之比、土塞增量与桩打入深度增量之比(IFR)随打入桩长与内径之比变化的规律,并线性拟合出土塞增量与桩打入深度增量之比与土塞高度和桩打入深度之比(PLR)的经验公式。研究表明,大部分PHC桩在打桩过程中,土塞部分闭塞,桩从浅部较硬土层打入较软土层,IFR值减小,土塞闭塞作用大;桩从较软土层打入深部较硬土层,IFR值逐渐增大,土塞闭塞作用小,且土塞长度增量与桩打入深度增量之比与土塞长度与桩打入深度之比基本呈线性关系。 相似文献
5.
采用理论分析的方法,首先基于半无限土体中改进的球孔扩张理论,求解新桩沉桩挤土效应引起的土体位移场。然后将其作为已知条件施加于邻近既有桩,分析既有桩变形和内力变化规律,探讨既有桩桩端约束条件、桩身刚度及土体模量对既有桩响应的影响;同时结合数值分析,对本文理论方法进行验证。最后分析了新旧桩之间距离和新桩半径对挤土效应引起的既有桩变形和内力的影响。结果表明：桩端约束形式仅影响桩端附近桩身变形;随着新旧桩之间距离的增加,既有桩变形和内力显著减小;随着桩径的增加,既有桩变形和内力均逐渐增大。最后提出采用远离既有桩和采用长细桩的措施来降低新桩施工对既有桩的影响。 相似文献
6.
An analytical solution is developed in this paper to investigate the dynamic response of a large‐diameter end‐bearing pipe pile subjected to torsional loading in viscoelastic saturated soil. The wave propagation in saturated soil and pile are simulated by Biot's two‐phased linear theory and one‐dimensional elastic theory, respectively. The dynamic equilibrium equations of the outer soil, inner soil, and pile are established. The solutions for the outer and inner soils in frequency domain are obtained by Laplace transform technique and the separation of variables method. Then, the dynamic response of the pile is obtained on the basis of the perfect contacts between the pile and the outer soil as well as the inner soil. The results in this paper are compared with that of a solid pile in elastic saturated soil to verify the validity of the solution. Furthermore, the solution in this paper is compared with the classic plane strain solution to verify the solution further and check the accuracy of the plane strain solution. Numerical results are presented to analyze the vibration characteristics and illustrate the effect of the soil parameters and the geometry size of the pile on the complex impedance and velocity admittance of the pile head. Finally, the displacement of the soil at different depth and frequency is analyzed. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
7.
This study theoretically investigates the dynamic response of an end‐bearing pile embedded in saturated soil considering the transverse inertial effect of the pile. The saturated soil surrounding the pile is described by Biot poroelastic theory, and the pile is represented by a Rayleigh‐Love rod because both the vertical and radial displacements at the soil‐pile interface are considered. The potential function decomposition method and variable separation method are introduced to solve the governing equations of the soil, in which the vertical and radial displacement components are coupled. The governing equation of the pile is solved using the continuity conditions at the pile‐soil interface. Next, the velocity admittance in the frequency domain and the velocity response in the time domain at the pile top are presented based on the Laplace transform and inverse Fourier transform, respectively. Subsequently, the reduced solution is compared with a 1‐dimensional model solution to verify the validity, and the influences of the slenderness ratio of the pile on the transverse inertial effect of the pile are analyzed. Moreover, Poisson ratio, the slenderness ratio of the pile, and the pile‐soil modulus ratio are studied. Finally, the theoretical and measured curves in the engineering project are compared, and the results demonstrate the good application prospects of the solution presented in this article. 相似文献
8.
A cavity expansion procedure for the simulation of pile driving is presented and assessed in this paper. The analysis uses a non-linear finite-element model and the penetration of the pile into the soil is simulated by a radial opening of the soil around the pile. The case of a pile advanced by expansion will be compared to a similar pile subjected to computational driving (referred to, respectively, as ‘expanded’ and ‘driven’ piles for convenience). The state of stress and deformation, and the evolution of pore-water pressure in the soil will be monitored for the expanded and driven piles. Further computational driving will be applied to both cases and the pile response and soil resistance will be compared. The computational cost of advancing the pile by expansion will finally be investigated. Copyright © John Wiley & Sons, Ltd. 相似文献
9.
矩形桩沉桩挤土效应与传统圆形截面桩不同,传统的理论模型和试验技术不适用于研究矩形截面桩沉桩挤土效应。基于透明土变形可视化技术,研究了矩形截面桩沉桩挤土的位移场变化规律。试验结果表明,矩形桩沉桩后,桩周可以分为两块区域：靠近矩形桩身的过渡区域,在此区域内挤土位移模式呈现非柱对称特征,过渡区半径约为4deq～5deq,远离桩身的圆孔扩张区域,该区域内挤土位移呈现柱对称特征。根据矩形截面桩的沉桩挤土试验,推导出了矩形桩截面的修正扩孔理论,并将理论计算的位移值与模型试验测量值进行对比,验证修正扩孔理论的合理性。 相似文献
10.
Application of a continuum numerical model for pile driving analysis and comparison with a real case
This paper presents the results of a so-called continuum numerical model for wave propagation analysis and soil-pile dynamic response during pile driving. An axisymmetric finite difference numerical model is developed having solid elements for both pile structure and the soil media surrounding and below the pile. Interface elements are used between the pile shaft and the soil to facilitate the sliding between the two media. The performance of the developed model is verified in two stages. First, a simple rod is subjected to a half sine-wave force function at the rod head and the corresponding reflections of force and velocity (multiplied by impedance) are presented for different boundary conditions at the rod tip. The model is then used for signal matching analysis of a real driven pile for which complete information of soil layering, dynamic test signals, and static load test results are available. The signal matching analysis was performed successfully and comparison between several other predicted and measured parameters proved the reasonably good performance of the developed continuum model. 相似文献
11.
This paper presents a new method to derive the analytical solution for the vertical impedance of an end‐bearing pile in viscoelastic soil. The soil is assumed as a homogeneous and isotropic layer, and the pile is considered as a one‐dimensional Euler rod. Considering both the vertical and radial displacements of soil and soil–pile coupled vibration, the governing equations of the soil and pile are established. The volumetric strain of soil is obtained by transformation on the equations of soil and variable separation method. Then the vertical and radial displacements of soil are obtained accordingly. The displacement response and impedance function of pile are derived based on the continuity assumption of the displacement and stress between the pile and soil. The solution is verified by being compared with an existing solution obtained by introducing potential functions. Furthermore, a comparison with two other simplified solutions is conducted. Numerical examples are presented to analyze the vibration characteristics of the pile. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
12.
A modulus‐multiplier approach, which applies a reduction factor to the modulus of single pile p–y curves to account for the group effect, is presented for analysing the response of each individual pile in a laterally loaded pile group with any geometric arrangement based on non‐linear pile–soil–pile interaction. The pile–soil–pile interaction is conducted using a 3D non‐linear finite element approach. The interaction effect between piles under various loading directions is investigated in this paper. Group effects can be neglected at a pile spacing of 9 times the pile diameter for piles along the direction of the lateral load and at a pile spacing of 6 times the pile diameter for piles normal to the direction of loading. The modulus multipliers for a pair of piles are developed as a function of pile spacing for departure angle of 0, 90, and 180sup>/sup> with respect to the loading direction. The procedure proposed for computing the response of any individual pile within a pile group is verified using two well‐documented full‐scale pile load tests. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
13.
《Computers and Geotechnics》1988,5(1):39-49
It is proposed that the dynamics of pile driving based on the one-dimensional theory of wave propagation be analyzed by the finite element method. This approach enables one to continuously interpolate the displacement, velocity and acceleration profiles throughout the pile length. In contrast to the finite difference technique presented by E. A. L. Smith [1] and the finite element procedure presented by I. M. Smith [2] in which initial conditions are defined on the basis of a prescribed hammer velocity, the method presented herein defines initial conditions on the basis of a prescribed impact force versus time curve at the pile/hammer point of contact. Applications of the proposed technique to typical pile driving problems on an elastoplastic soil and using an implicit time-integration scheme are discussed using a numerical example. 相似文献
14.
The response of laterally loaded pile foundations may be significantly important in the design of structures for such loads. A static horizontal pile load test is able to provide a load–deflection curve for a single free‐head pile, which significantly differs from that of a free‐ or fixed‐head pile group, depending on the particular group configuration. The aim of this paper is to evaluate the influence of the interaction between the piles of a group fixed in a rigid pile cap on both the lateral load capacity and the stiffness of the group. For this purpose, a parametric three‐dimensional non‐linear numerical analysis was carried out for different arrangements of pile groups. The response of the pile groups is compared to that of the single pile. The influence of the number of piles, the spacing and the deflection level to the group response is discussed. Furthermore, the contribution of the piles constituting the group to the total group resistance is examined. Finally, a relationship is proposed allowing a reasonable prediction of the response of fixed‐head pile groups at least for similar soil profile conditions. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
15.
16.
A novel analytical approach for predicting the noncylindrical pile penetration‐induced soil displacement in undrained soil by combining use of cavity expansion and strain path methods 
下载免费PDF全文
下载免费PDF全文 Since development of cavity expansion theory and strain path method, almost all the conventional analyses of pile penetration problem have been based on circular cross section penetrometer. However, noncylindrical pile (with noncircular cross section) is also required in geotechnical engineering such as rectangular cross‐sectional pile, X‐sectional cast‐in‐place concrete pile, H‐shaped steel pile, prefabricated vertical drains, and flat dilatometer. This paper presents a novel and general analytical approach for capturing the soil deformation mechanism around the pile with arbitrary cross section. The penetration problem is simulated by a new 2‐dimensional (radial and circumferential) cavity expansion model. Based on the theoretical framework of strain path method, the kinematics (velocity field) of the noncylindrical cavity expansion is reduced to solve the Laplace equation with arbitrary velocity boundary conditions by using the conformal mapping technique. Then, solutions for the strain and displacement, which could consider the large deformation effect, are obtained by the integration of the strain rate and velocity along the streamline. The analytical solution is validated by comparing the degenerate solution of this study with conventional circular (cylindrical) cavity expansion theory. Subsequently, typical numerical examples for the deformation mechanism of elliptical and rectangular cavity expansion are presented to prove the advantage of the proposed new solution particularly in capturing the noncylindrical symmetric displacement field. A brief application of the proposed new analytical solution to the interpretation of the smear effect of prefabricated vertical drain installation confirms its useful in geotechnical engineering. 相似文献
17.
18.
砂土中开口管桩沉桩过程的颗粒流模拟研究 总被引：1，自引：0，他引：1
基于颗粒流理论,采用PFC2D程序,模拟再现不同型号开口管桩在沉桩过程中土塞的形成演化规律、土颗粒细观结构变化以及桩周土应力场分布情况,并通过分析土体细观变化模式揭示沉桩过程中宏观力学响应的内在机制。计算结果表明,管桩直径对土塞效应影响很大,外径为30 mm的开口管桩,沉桩过程中土塞增量填充率（IFR）值较小,土塞效应明显,土塞高度小,类似闭口桩;随着管桩直径的增大,土塞效应迅速减小,大直径管桩在砂土中沉桩全部闭塞的可能性很小。细观因素（孔隙率和滑动比例）与土体宏观位移表现之间存在着明显的相互对应关系,并依此将桩周土划分3个区域。桩周土体水平应力、竖向应力和剪应力都在桩底附近形成“应力核”,不同型号管桩桩周土应力场分布相近。 相似文献
19.
A finite element model for pile‐driving analysis is developed and used to investigate the behaviour of pre‐bored piles, which are then driven the last 1.25 or 2.25 m to their final design depth. The study was conducted for the case of saturated clays. The model traces the penetration of the pile into the soil and accommodates for large deformations. The non‐linear behaviour of the clay in this study is predicted using the bounding‐surface‐plasticity model, as applied to isotropic cohesive soils. The details of the 3‐D numerical modelling and computational schemes are presented. A significant difference was observed in the pile displacement during driving, and in the computed soil resistance at the pile tip, particularly at the earliest driving stages. No difference in soil resistance at the soil pile interface along the pile shaft was detected between the pre‐bored piles whether driven 1.25 or 2.25 m. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
20.
Analysis of piles subjected to lateral soil movements using a three‐dimensional displacement approach 下载免费PDF全文
下载免费PDF全文 Hiroyoshi Hirai 《国际地质力学数值与分析法杂志》2016,40(2):235-268
An analytical approach using the three‐dimensional displacement of a soil is investigated to provide analytical solutions of the horizontal response of a circular pile subjected to lateral soil movements in nonhomogeneous soil. The lateral stiffness coefficient of the pile shaft in nonhomogeneous soil is derived from the rocking stiffness coefficient that is obtained from the analytical solution, taking into account the three‐dimensional displacement represented in terms of scalar potentials in the elastic three‐dimensional analysis. The relationship between horizontal displacement, rotation, moment, and shear force of a pile subjected to lateral soil movements in nonhomogeneous soil is obtainable in the form of the recurrence equation. For the relationship between the lateral pressure and the horizontal displacement, it is assumed that the behavior is linear elastic up to lateral soil yield, and the lateral pressure is constant under the lateral soil yield. The interaction factors between piles subjected to both lateral load and moment are calculated, taking into account the lateral soil movement. The formulation of the lateral displacement and rotation of the pile base subjected to lateral loads in nonhomogeneous soils is presented by taking into account the Mindlin equation and the equivalent thickness for soil layers in the equivalent elastic method. For lateral movement, lateral pressure, bending moment, and interaction factors, there are small differences between results obtained from the 1‐D and the 3‐D displacement methods except a very flexible pile. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献