首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Abstract Apatite and zircon fission-track (FT) analyses of the Shimanto accretionary complex and its vicinities, southwest Japan, unraveled the episodic material migration of the deep interiors of the accretionary complex. Apatite data with 100°C closure temperature (Te) generally indicate ~10 Ma cooling throughout the Shimanto complex. In contrast, zircon data with 260°C Te exhibit a wide range of apparent ages as a consequence of paleotemperature increase to the zircon partial annealing zone. In the Muroto and Kyushu regions, maximum temperatures tend to have been higher in the northern, older part of the complex, with indistinguishable temperature differences between coherent and melange units adjacent to each other. It thus suggests, along with vitrinite reflectance data, that older accretionary units occurring to the north sustain greater maximum burial during the accretion-burial-exhumation process. Zircon data suggest two cooling episodes: ~70 Ma cooling at widespread localities in the Cretaceous Shimanto Belt and Sambagawa Belt, and ~15 Ma cooling in the central Kii Peninsula. The former is consistent with 40Ar/39Ar cooling ages from the Sambagawa Belt, whereas the latter slightly predates the widespread 10 Ma apatite cooling ages. These data imply that the extensive material migration and exhumation took place in and around the Shimanto complex in Late Cretaceous as well as in Middle Miocene. Considering tectonic factors to control evolution of accretionary complexes, the episodic migration is best explained by accelerated accretion of sediments due to increased sediment influx at the ancient Shimanto trench, probably derived from massive volcano-plutonic complexes contemporaneously placed inland. Available geo- and thermochronologic data suggest that extensive magmatism triggered regional exhumation twice in the past 100 Ma, shedding new light on the cordilleran orogeny and paired metamorphism concepts.  相似文献   

2.
Hideki  Mukoyoshi  Tetsuro  Hirono  Hidetoshi  Hara  Kotaro  Sekine  Noriyoshi  Tsuchiya  Arito  Sakaguchi  Wonn  Soh 《Island Arc》2009,18(2):333-351
To understand the characteristics of deformation of an out-of-sequence thrust (OST) and the style of fluid flow along it, we investigated the Nobeoka Tectonic Line, which has been interpreted as a deep OST (7–9 km), in the Shimanto accretionary complex, Southwest Japan. The shear zone in the footwall differs significantly in the along-strike direction not only in thickness, which varied from 100 to 300 m, but also in lithology and mineral vein development. These variations might reflect primarily differences in lithology; that is, the sandstone-dominant shear zone with a large amount of mineral veins precipitated in microcracks is relatively thick, whereas the shale-dominant shear zone with a small amount of veins and with textures indicating highly pressurized pore fluid, is thinner. By comparison with characteristics of a shallow OST (3–5 km), we conclude that the shallow OST has experienced repeated brittle failure with rapid slip and focused fluid flow whereas the deep OST has experienced both brittle and ductile deformation, followed by fluid flow of various styles, depending on the lithology.  相似文献   

3.
Abstract Thermal structural analysis and paleo-heat flow estimation provide clues to understanding the thermal evolution of the accretionary complex. The thermal structure and heat flow in the Jurassic Chichibu and Cretaceous to Tertiary Shimanto accretionary complex, Southwest Japan, have been investigated by vitrinite reflectance measurement and fluid inclusion analysis. As a result, the local and multistage metamorphisms were recognized as follows. First, the Tertiary complex around the Miocene Ashizuri granite underwent exposure to extra-high temperatures. Second, the Okitsu Melange underwent exposure to higher temperatures than the surrounding strata and was formed concurrently with the Kula-Pacific ridge subduction beneath the Japanese Islands in the Eocene. Finally, the thermal structure of most of the Cretaceous and southern Jurassic complexes is independent of the geologic structure, indicating that these areas suffered thermal overprint. Regional radiometric dating studies show that most of the Cretaceous Shimanto complex was heated in the Eocene; the thermal overprint might have occurred as a result of ridge subduction. The heat flow during peak heating was estimated to be 95–120 mW/m2 except for the Cretaceous Okitsu melange and the Cretaceous Nonokawa formation, north of the Okitsu Melange; a much higher value of heat flow of ~200 mW/m2 was estimated in the Okitsu Melange. An estimation of heat flow failed for the non-okawa formation because thermal equilibrium between the fluid and rocks has not yet been reached. It is probable that the southern strata underwent a higher heat flow. Such a trenchward increase in heat flow resembles the present situation of the Nankai Trough, although the heat flow in the Eocene was much higher.  相似文献   

4.
Masanori  Kurosawa  Satoshi  Ishii  Kimikazu  Sasa 《Island Arc》2010,19(1):40-59
Fluid inclusions in quartz from miarolitic cavities, pegmatites, and quartz veins in Miocene biotite-granite plutons, Kofu, Japan, were analyzed by particle-induced X-ray emission to examine chemistries and behaviors of granite-derived fluids in island-arc granite. Most inclusions are aqueous two-phase inclusions, and halite-bearing polyphase inclusions are also observed in quartz veins in the upper part of the plutons. From element contents of fluid inclusions in the miarolitic cavities, the original fluid released from the granite plutons during solidification is inferred to have concentrations of Mn, Fe, Cu, Zn, Ge, Br, Rb, Pb, and Ba of several tens to hundreds of parts per million by weight (ppm) and a salinity of about 10 wt% NaCl equivalent. We estimated the formation conditions of the fluid to have been at about 1.3–1.9 kb and 530–600°C on the basis of the homogenization temperatures of the inclusions and the solidification conditions of the plutons. The polyphase inclusions probably originated from hypersaline fluid by boiling of part of the released fluid during its ascent in the plutons. The polyphase inclusions contain several hundreds to tens of thousands of ppm of Fe and Mn, and tens to several hundreds of ppm of Cu, Zn, Br, Rb, and Pb. The salinities are about 35 wt% NaCl equivalent. Compositional variations in two-phase inclusions from the miarolitic cavities and quartz veins are primarily explained by mineral precipitation with dilution by surface water exerting a secondary influence. Thus, chemistries and behaviors of the granite-derived fluids in the plutons can be explained by mineral precipitation, boiling, and dilution of the originally released fluid.  相似文献   

5.
Abstract Illite crystallinity (IC) analyses in the Upper Cretaceous Shimanto accretionary complex of the southern Akaishi Mountains, eastern Southwest Japan confirm the applicability of this technique for evaluating the grade of diagenesis/metamorphism in a sediment-dominated accretionary complex. Reproducibility analyses of IC values show a variance of about 15% from the mean. Data from three traverses, which transect across-strike sections of ∼25 km, clearly demonstrate that the IC distributions have specific overall trends. The IC values belong to the lQwer anchizone and the zone of diagenesis. The IC distributions may be controlled locally by structural features, but there are no distinct relationships with regional-scale geological structures. This may indicate that the heterogeneous geothermal rise affected the pre-existing structural and diagenetic/metamorphic framework of the accretionary sequence. Along-strike variations of grade tend to increase toward the northeast where a Middle Miocene granitoid occurs. Hence, the original diagenetic/metamorphic framework of this part of the Shimanto Belt was presumably overprinted during the Middle Miocene.  相似文献   

6.
Nobuhiko  Nakano  Yasuhito  Osanai  Masaaki  Owada  Yasutaka  Hayasaka  Tran Ngoc  Nam 《Island Arc》2009,18(1):126-143
The Kontum Massif in central Vietnam is composed of various metamorphic complexes including a high-temperature southern part (Kannak and Ngoc Linh complexes) and a low- to medium-temperature northern part (Kham Duc complex). The Kham Duc complex exhibits Barrovian-type medium-pressure metamorphism evidenced by kyanite- and/or staurolite-bearing metapelites. The garnet–gedrite–kyanite gneiss, which is the focus of the present study, preserves several mineral parageneses formed during a prograde and retrograde metamorphic history: staurolite + quartz in gedrite, garnet + gedrite + kyanite in the matrix, and spinel + cordierite symplectite between gedrite and sillimanite. The calculated semiquantitative petrogenetic grid reveals peak pressure conditions of 620–650°C at 1.1–1.2 GPa and peak temperature conditions of 730–750°C at 0.7–0.8 GPa. The monazite U–Th–Pb electron microprobe ages of the garnet–gedrite–kyanite gneiss and associated gneisses yield 246 ± 3 Ma for the Kham Duc complex, which is similar to the age of the high- to ultrahigh-temperature metamorphism in the adjacent Kannak and Ngoc Linh complexes of the southern Kontum Massif. The present results indicate that both the Barrovian-type and ultrahigh-temperature metamorphism occurred simultaneously in the Kontum Massif during an event strongly related to Permo–Triassic microcontinental collision tectonics in Asia.  相似文献   

7.
Noriko  Hasebe  Hiroaki  Watanabe 《Island Arc》2004,13(4):533-543
Abstract   To determine how local geological events contributed to the evolution of accretionary complexes and eventual exposure of rocks with different structural levels, geochronological mapping was carried out using fission track (FT) analysis at the Kii Peninsula, southwest Japan. At this site, the original zonal structure of Cretaceous accretionary complexes parallel to the subduction zone is disturbed by the northward projection of the Shimanto accretionary complex. Twenty-six zircon FT ages were obtained from an area of ∼12 km in an east–west direction and ∼15 km in a north–south direction, and classified into three groups: (i) ages ∼15 Ma (range ∼10–20 Ma), which are distributed along the northwest–southeast valley; (ii) ages of ∼50 Ma in the northwest of the study area; and (iii) ages older than those in Groups 1 and 2. Based on results from eight zircon FT length distributions, the Miocene ages appear to be the result of spatial variations in heat influx and cooling after the regional exhumation of the area, as recorded by FT ages of ∼50 Ma.  相似文献   

8.
Detrital zircon multi‐chronology combined with provenance and low‐grade metamorphism analyses enables the reinterpretation of the tectonic evolution of the Cretaceous Shimanto accretionary complex in Southwest Japan. Detrital zircon U–Pb ages and provenance analysis defines the depositional age of trench‐fill turbidites associated with igneous activity in provenance. Periods of low igneous activity are recorded by youngest single grain zircon U–Pb ages (YSG) that approximate or are older than the depositional ages obtained from radiolarian fossil‐bearing mudstone. Periods of intensive igneous activity recorded by youngest cluster U–Pb ages (YC1σ) that correspond to the younger limits of radiolarian ages. The YC1σ U–Pb ages obtained from sandstones within mélange units provide more accurate younger depositional ages than radiolarian ages derived from mudstone. Determining true depositional ages requires a combination of fossil data, detrital zircon ages, and provenance information. Fission‐track ages using zircons estimated YC1σ U–Pb ages are useful for assessing depositional and annealing ages for the low‐grade metamorphosed accretionary complex. These new dating presented here indicates the following tectonic history of the accretionary wedge. Evolution of the Shimanto accretionary complex from the Albian to the Turonian was caused by the subduction of the Izanagi plate, a process that supplied sediments via the erosion of Permian and Triassic to Early Jurassic granitic rocks and the eruption of minor amounts of Early Cretaceous intermediate volcanic rocks. The complex subsequently underwent intensive igneous activity from the Coniacian to the early Paleocene as a result of the subduction of a hot and young oceanic slab, such as the Kula–Pacific plate. Finally, the major out‐of‐sequence thrusts of the Fukase Fault and the Aki Tectonic Line formed after the middle Eocene, and this reactivation of the Shimanto accretionary complex as a result of the subduction of the Pacific plate.  相似文献   

9.
Abstract Pressure and temperature (P–T) conditions of mélange formation are estimated from fluid inclusions within “syn‐mélange” veins developed in the necks of boudins of sandstone blocks in the mélange of the Shimanto accretionary complex, south‐west Japan. The mélange records décollement‐zone processes. P–T conditions are in the range of 81 (+15) to 235 (±18) MPa and 150 (±25) to 220 (±31)°C. Assuming a constant fluid‐pressure to lithostatic‐pressure ratio for each data set, we estimate a P–T gradient of between 10.0°C/km (+0.2/?1.5) (lithostatic pressure) and 4.2°C/km (+0.1/?0.9) (hydrostatic pressure) from these results. The estimated lithostatic P–T gradient is much lower than that calculated from the age of the subducting oceanic plate. The estimated P–T conditions suggest that the mélange was formed within the seismogenic zone (hypothesized from thermal modeling), although the deformation mechanism of mélange (i.e. dominant diffusive mass transfer mainly in shale matrix with minor brittle breakage mainly in sandstone blocks) does not show evidence of seismic deformation. In addition, at the time of syn‐mélange vein formation, a shale matrix of mélange has injected into the vein, which indicates a ductile deformation of shale. A possible explanation for this discrepancy is that the mélange was formed during the interseismic period.  相似文献   

10.
Yasushi  Mori  Tadao  Nishiyama  Takeru  Yanagi 《Island Arc》2007,16(1):28-39
Abstract   Reaction zones of 0.5–10.0 m thick are commonly observed between serpentinite and pelitic schist in the Nishisonogi metamorphic rocks, Kyushu, Japan. Each reaction zone consists of almost monomineralic or bimineralic layers of talc + carbonates, actinolite (or carbonates + quartz), chlorite, muscovite and albite from serpentinite to pelitic schist. Magnesite + quartz veins extend into the serpentinite from the talc + carbonates layer, while dolomite veins extend into the pelitic schist from the muscovite layer. These veins are filled by subhedral minerals with oriented growth features. Primary fluid inclusions yield the same homogenization temperatures (145–150°C) both in the reaction zone and in the veins, suggesting their simultaneous formation. Mass-balance calculations using the isocon method indicate that SiO2, MgO, H2O and K2O are depleted in the reaction zone relative to the protoliths. These components were probably extracted from the reaction zone as fluids during the formation of the reaction zone.  相似文献   

11.
Abstract A deep section of accretionary complex, the metamorphosed Susunai Complex, is observed on Sakhalin Is., Russia. High pressure part of pumpellyite-actinolite facies metavolcanics, metacherts and metapelites are well exposed and constitute a tectonic pile preserving primary structures related to underplating of the oceanic crust. Three stages of deformation, D1 through D3, suggest successive deformation during subduction, underplating and exhumation of the complex. Oceanic material in the complex is more abundant than other well documented ancient accretionary complexes (e.g. the Shimanto Belt in southwest Japan and the Ghost Rocks Formation in Alaska), which were shallowly underplated. At Susunai, deep down-stepping of a décollément has scraped off the upper part of the oceanic crust, primarily the pillowed basalt horizon. This down-stepping results from crustal weakening as overpressured water is released from the fractured oceanic crust during metamorphism.  相似文献   

12.
Tadahiro  Shibata  Yuji  Orihashi  Gaku  Kimura  Yoshitaka  Hashimoto 《Island Arc》2008,17(3):376-393
Abstract   Growth of an accretionary prism is effected by frontal accretion and deep subsurface underplating at the base of the prism. A systematic oceanward and structurally downward younging of underplated sequences is expected as the prism thickens and grows. To test this hypothesis and explore the processes of underplating, the U–Pb ages of zircon grains contained in underplated mélange sequences or packages of the Late Cretaceous and early Paleogene accretionary complex of the Shimanto Belt, southwest Japan, were determined using LA–ICP–MS laser technology. The results document systematic but intermittent younging ages within a single underplated mélange package. This finding suggests that underplating took place episodically during a period of several million years and that between episodes of underplating, a large amount of sediment was subducted to depths much greater than where underplating was occurring.  相似文献   

13.
Yasuo  Miyagi  Akira  Takasu 《Island Arc》2005,14(3):215-235
Abstract   Prograde eclogites occur in the Tonaru epidote amphibolite mass in the Sambagawa Metamorphic Belt of central Shikoku. The Tonaru mass is considered to be a metamorphosed layered gabbro, and occurs as a large tectonic block (approximately 6.5 km × 1 km) in a high-grade portion of the Sambagawa schists. The Tonaru mass experienced high- P /low- T prograde metamorphism from the epidote-blueschist facies to the eclogite facies prior to its emplacement into the Sambagawa schists. The estimated P – T conditions are T  = 300–450°C and P  = 0.7–1.1 GPa for the epidote-blueschist facies, and the peak P – T conditions for the eclogite facies are T  = 700–730°C and P  ≥ 1.5 GPa. Following the eclogite facies metamorphism, the Tonaru mass was retrograded to the epidote amphibolite facies. It subsequently underwent additional prograde Sambagawa metamorphism, together with the surrounding Sambagawa schists, until the conditions of the oligoclase–biotite zone were reached. The high- P /low- T prograde metamorphism of the eclogite facies in the Tonaru mass and other tectonic blocks show similar steep d P /d T geothermal gradients despite their diverse peak P – T conditions, suggesting that these tectonic blocks reached different depths in the subduction zone. The individual rocks in each metamorphic zone of the Sambagawa schists also recorded steep d P /d T geothermal gradients during the early stages of the Sambagawa prograde metamorphism, and these gradients are similar to those of the eclogite-bearing tectonic blocks. Therefore, the eclogite-bearing tectonic blocks reached greater depths in the subduction zone than the Sambagawa schists. All the tectonic blocks were ultimately emplaced into the hanging wall side of the later-subducted Sambagawa high-grade schists during their exhumation.  相似文献   

14.
Illite crystallinity, K–Ar dating of illite, and fission‐track dating of zircon are analyzed in the hanging wall (Sampodake unit) and footwall (Mikado unit) of a seismogenic out‐of‐sequence thrust (Nobeoka thrust) within the Shimanto accretionary complex of central Kyushu, southwest Japan. The obtained metamorphic temperatures, and timing of metamorphism and cooling, reveal the tectono‐metamorphic evolution of the complex, and related development of the Nobeoka thrust. Illite crystallinity data indicate that the Late Cretaceous Sampodake unit was metamorphosed at temperatures of around 300 to 310°C, while the Middle Eocene Mikado unit was metamorphosed at 260 to 300°C. Illite K–Ar ages and zircon fission‐track ages constrain the timing of metamorphism of the Sampodake unit to the early Middle Eocene (46 to 50 Ma, mean = 48 Ma). Metamorphism of the Mikado unit occurred no earlier than 40 Ma, which is the youngest depositional age of the unit. The Nobeoka thrust is inferred to have been active during about 40 to 48 Ma, as the Sampodake unit started its post metamorphic cooling after 48 Ma and was thrust over the Mikado unit at about 40 Ma along the Nobeoka thrust. These results indicate that the Nobeoka thrust was active for more than 10 million years.  相似文献   

15.
Yui  Kouketsu  Masaki  Enami 《Island Arc》2010,19(1):165-176
Aragonite and omphacite-bearing metapelite occurs in the albite–biotite zone of the Togu (Tohgu) area, Besshi region, Sambagawa metamorphic belt, central Shikoku, Japan. This metapelite consists of alternating graphite-rich and graphite-poor layers that contain garnet, phengite, chlorite, epidote, titanite, calcite, albite, and quartz. A graphite-poor layer contains a 1.5-cm ivory-colored lens that mainly consists of phengite, calcite, albite, and garnet. Aragonite, omphacite, and paragonite occur as inclusions in the garnet of the ivory lens. The aragonite has a composition that is close to the CaCO3 end-member: the FeCO3 and MnCO3 components are both less than 0.3 mol% and the SrCO3 component is about 1 mol%. The aragonite + omphacite + quartz assemblage in garnet indicates equilibrium conditions of P  > 1.1–1.3 GPa and T  = 430–550°C. Quartz grains sealed in garnet of the aragonite and omphacite-bearing sample and other metapelites in the Togu area preserve a high residual pressure that is equivalent to the Sambagawa eclogite samples. These facts suggest that: (i) the Togu area experienced eclogite facies metamorphism; and (ii) thus, eclogite facies metamorphism covered the Sambagawa belt more extensively than previously recognized.  相似文献   

16.
C. W. Oh  & J. G. Liou 《Island Arc》1998,7(1-2):36-51
The petrogenetic grid between the eclogite and other high-pressure/temperature (P/T) metamorphic facies in a basaltic system is constructed by considering barroisite as one of the important phases in high-P/T metamorphism and by using previous petrological data combined with Schreinemakers' analysis and slope calculation. In the constructed petrogenetic grid, the eclogite facies is bounded by the blueschist and epidote–amphibolite facies with negative-slope reactions at lower temperatures (450–550 °C) and by the epidote–amphibolite, amphibolite and granulite facies with positive-slope reactions at higher temperatures (> 550–600 °C). The eclogite facies does not contact the greenschist facies, and the lowest P condition for the eclogite facies exists at the boundary between the eclogite and epidote–amphibolite facies. The temperature range of the epidote–amphibolite facies increases with increasing pressure until 8–11 kbar and then decreases up to 13–15 kbar. Compared to boundaries of other facies, boundaries of the eclogite facies may have wider P–T ranges. The boundary between the blueschist and eclogite facies occurs over a large temperature range from 450 to 620 ± 30 °C, and the transitions between the eclogite and amphibolite or high-pressure granulite facies occur over a pressure range in excess of 6–10 kbar.  相似文献   

17.
High-pressure metamorphic rocks are exposed in Karangsambung area of central Java, Indonesia. They form part of a Cretaceous subduction complex (Luk–Ulo Complex) with fault-bounded slices of shale, sandstone, chert, basalt, limestone, conglomerate and ultrabasic rocks. The most abundant metamorphic rock type are pelitic schists, which have yielded late Early Cretaceous K–Ar ages. Small amounts of eclogite, glaucophane rock, garnet–amphibolite and jadeite–quartz–glaucophane rock occur as tectonic blocks in sheared serpentinite. Using the jadeite–garnet–glaucophane–phengite–quartz equilibrium, peak pressure and temperature of the jadeite–quartz–glaucophane rock are P  = 22 ± 2 kbar and T  = 530 ± 40 °C. The estimated P–T conditions indicate that the rock was subducted to ca 80 km depth, and that the overall geothermal gradient was ∼ 7.0 °C/km. This rock type is interpreted to have been generated by the metamorphism of cold oceanic lithosphere subducted to upper mantle depths. The exhumation from the upper mantle to lower or middle crustal depths can be explained by buoyancy forces. The tectonic block is interpreted to be combined with the quartz–mica schists at lower or middle crustal depths.  相似文献   

18.
Abstract Illite crystallinity (IC) and illite b, lattice spacing were measured across the Cretaceous Shimanto Belt, Kii Peninsula, Southwest Japan. For the IC survey, 103 samples of argillaceous rocks were analyzed from the central area and the western area of the belt. Values of IC (Kubler Index) vary between 0.28 and 0.71 Δ°2θ and indicate diagenetic and anchizone metamorphism respectively. The IC distribution reveals two contrasting patterns of thermal maturity. The Hanazono Formation, exposed in the northern area of the belt, generally dips north, but IC values increase systematically from 0.28 Δ°2θ in the north to 0.54 Δ°2θ in the south and indicate an inverted thermal structure. Values in other formations vary widely in the southern area of the belt ranging between 0.45 and 0.71 Δ°2θ, but the values do not show any systematic change from north to south and on average remain almost constant. Illite bo, lattice spacing values for 56 samples vary between 9.006 and 9.041 Å corresponding to intermediate pressure conditions of the metamorphic facies. These values, combined with paleotemperatures estimated from IC, indicate paleogeothermal gradients of 22 and 31°C/km for the northern and southern areas of the belt, respectively. The inverted thermal structure of the Hanazono Formation, together with a lower paleogeothermal gradient, possibly is a result of the subduction of a relatively cold oceanic plate during the Late Cretaceous. The higher geothermal gradient could be a product of late thermal overprinting caused by the later subduction of a comparatively younger and hotter oceanic plate during the Eocene.  相似文献   

19.
Hayato  Ueda  Sumio  Miyashita 《Island Arc》2005,14(4):582-598
Abstract   An accretionary complex, which contains fragments of a remnant island arc, was newly recognized in the Cretaceous accretionary terranes in Hokkaido, Japan. It consists of volcanics, volcanic conglomerate, intermediate to ultramafic intrusive rocks with island-arc affinity including boninitic rocks, accompanied by chert and deformed terrigenous turbidites. Compared with the results of modern oceanic surveys, the preserved sequence from island-arc volcanics to chert, via reworked volcanics, is indicative of intraoceanic remnant arc, because the sequence suggests an inactive arc isolated within a pelagic environment before its accretion. The age of a subducting oceanic crust can be discontinuous before and after a remnant-arc subduction, resulting in abrupt changes in accretion style and metamorphism, as seen in Cretaceous Hokkaido. Subduction of such an intraoceanic remnant arc suggests that the subducted oceanic plate in the Cretaceous was not an extensive oceanic plate like the Izanagi and/or Kula Plates as previously believed by many authors, but a marginal basin plate having an arc–back-arc system like the present-day Philippine Sea Plate.  相似文献   

20.
Geological observations in the central part of Tokunoshima in the Amami Islands, Southwest Japan, reveal that discrete layers of serpentinite, dioritic gneiss, and amphibolite are intercalated into pelitic schist and these rock bodies form a northwest‐dipping tectonic stack. A subhorizontal psammitic schist layer overlies them. These rocks underwent ductile deformation that is denoted by penetrative foliation and mineral lineation. Microstructures of the sheared metamorphic rocks and serpentinite indicate top‐to‐the‐east, ‐southeast or ‐south (hanging‐wall up) displacements. The en echelon array of rock bodies is interpreted as a duplex with the psammitic schist layer on its top and the pelitic schist layer on its bottom. It is inferred that the serpentinite‐bearing duplex was formed due to the tectonic erosion and the subsequent accretionary growth operated in a Cretaceous or older subduction zone. Tokunoshima has been considered to belong to the Shimanto Belt. However, regional low‐pressure and high‐temperature type amphibolite‐facies metamorphism and related ductile deformation have not been recognized in the other areas of the Shimanto Belt. There is no metamorphic rock occurrence comparable to that of Tokunoshima in the neighboring islands. The metamorphic rocks in Tokunoshima can be correlated to any of low‐pressure/temperature type metamorphic regions in Kyushu.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号