首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 463 毫秒
1.
Abstract Deformation in the Sanbagawa Belt is characterized by ductile flow in an east-west direction sub-parallel to its length. The east-west flow (D1) caused large-scale recumbent folding of the metamorphic sequence in central Shikoku, which can explain the inverted thermal structure of this region. Chemical zoning of metamorphic minerals associated with D1 microstructures also suggest that the east-west flow developed under retrograde conditions. D1 is therefore related to exhumation rather than subduction processes. A variety of kinematic indicators show that during the east-west flow, deformation was partitioned into structurally continuous domains with opposed senses of shear. This suggests that bulk deformation was not simple shear but included a component of flattening.  相似文献   

2.
Abstract   The Lower Sorachi Group of the Sorachi–Yezo Belt in central Hokkaido, Japan is a peculiar accretionary complex characterized by numerous occurrences of greenstones (metabasalts and diabases), which are mostly composed of aphyric basalts. Clinopyroxene-rich phenocryst assemblage in phyric basalts is different from olivine–plagioclase assemblage in mid-oceanic ridge basalts (MORB). The greenstones are geochemically uniform, and show a lower-Ti trend than MORB in an FeO*/MgO-TiO2 diagram, mostly plotting on the island arc tholeiite (IAT) field in a TiO2−10MnO−10P2O5 diagram. In a MORB-normalized spider diagram, the greenstones show a flat pattern from P to Y, which are lower than those of normal mid-oceanic ridge basalt (N-MORB). These indicate that the greenstones were derived by a higher degree of partial melting from a depleted mantle similar to a N-MORB source, and experienced olivine–clinopyroxene fractional crystallization. However, a positive spike of Nb in the spider diagram cannot be explained, and may be attributed to mantle heterogeneity. These characteristics are analogous to those of oceanic plateau basalts (OPB) such as in Ontong Java Plateau, Manihiki Plateau and Nauru Basin, suggesting that the greenstones in the Lower Sorachi Group are of oceanic plateau origin. The present study proposes new field divisions to distinguish OPB from MORB in the conventional FeO*/MgO–TiO2 and TiO2−10MnO−10P2O5 diagrams.  相似文献   

3.
Large-scale compositional domains at DSDP/ODP drill sites 417A, 417D and 418A were analyzed for O, Sr and Nd isotope ratios, and REE, U, K, Rb and Sr abundances, to constrain the bulk chemical composition of the oceanic crust that is recycled at subduction zones. The combination of the three sites gives the composition of the upper oceanic crust in this region over a distance of about 8 km. The δ18OSMOW and87Sr/86Srmeas of compositional domains 10–100 m in size correlate well, with a range of 7.7–19.2 and 0.70364–0.70744, and mean of 9.96 and 0.70475, respectively. The Rb inventory of the upper crust increases by about an order of magnitude, while Sr contents remain constant. U abundances increase moderately under oxidizing alteration conditions and nearly triple in the commonly reducing alteration environments of the upper oceanic crust. REEs are influenced by alteration only to a small extent, and recycled oceanic crust is similar to MORB with respect to143Nd/144Nd. Even though the average composition of the upper oceanic crust is well defined, the large scale composition varies widely. Highly altered compositional domains may not have a large impact on the average composition of the oceanic crust, but they may preferentially contribute to fluids or partial melts derived from the crust by prograde metamorphic reactions.  相似文献   

4.
Cretaceous episodic growth of the Japanese Islands   总被引：1，自引：0，他引：1  
G. Kimura 《Island Arc》1997,6(1):52-68
Abstract The Japanese Islands formed rapidly in situ along the eastern Asian continental margin in the Cretaceous due to both tectonic and magmatic processes. In the Early Cretaceous, huge oceanic plateaus created by the mid-Panthalassa super plume accreted with the continental margin. This tectonic interaction of oceanic plateau with continental crust is one of the significant tectonic processes responsible for continental growth in subduction zones. In the Japanese Islands, Late Cretaceous-Early Paleogene continental growth is much more episodic and drastic. At this time the continental margin uplifted regionally, and intra-continent collision tectonics took place in the northern part of the Asian continent. The uplifting event appears to have been caused by the subduction of very young oceanic crust (i.e. the Izanagi-Kula Plate) along the continental margin. Magmatism was also very active, and melting of the young oceanic slab appears to have resulted in ubiquitous plutons in the continental margin. Regional uplift of the continental margin and intra-continent collision tectonics promoted erosion of the uplifted area, and a large amount of terrigenous sediment was abruptly supplied to the trench. As a result of the rapid supply of terrigenous detritus, the accretionary complexes (the Hidaka Belt in Hokkaido and the Shimanto Belt in Southwest Japan) grew rapidly in the subduction zone. The rapid growth of the accretionary complexes and the subduction of very young, buoyant oceanic crust caused the extrusion of a high-P/T metamorphic wedge from the deep levels of the subduction zone. Episodic growth of the Late Cretaceous Japanese Islands suggests that subduction of very young oceanic crust and/or ridge subduction are very significant for the formation of new continental crust in subduction zones.  相似文献   

5.
Abstract The Maksyutov Complex, situated in the southern Ural Mountains of Russia, is the first location where quartz aggregates within garnets exhibiting radial fractures were identified as coesite pseudomorphs (Chesnokov & Popov 1965). The complex consists of two tectonic units: a structurally lower eclogite-bearing schist unit and an overlying meta-ophiolite unit. Both units show evidence for multiple stages of metamorphism and deformation. The high-pressure metamorphism of the eclogite-bearing schist unit, discussed in this report, is suspected to be related to a collision between the Russian platform and a fragment of the Siberian continent during the early Cambrian. At least three stages of metamorphism (M1-3) and two stages of deformation (S1 and S2) were observed in thin sections: M1) garnet (Alm55-60, Prp22-28, Grs16-20) + omphacite (Jd46-56) + phengite (Si ≅ 3.5) + rutile; M2) garnet + glaucophane ± lawsonite + white mica; and M3) epidote + chlorite ± albite ± actinolite + white mica. Observed mineral parageneses define a retrograde P-T path for the eclogite. Mineral assemblages within the most representative eclogite from the lower unit of the Maksyutov Complex indicate minimum peak pressures of 15 kbar at temperatures of approximately 600°C. If the presence of coesite pseudomorph is confirmed, the peak ultrahigh-pressure metamorphism may be as high as 27 kbar at 615°C.  相似文献   

6.
Abstract : The Hidaka metamorphic belt consists of an island-arc assembly of lower to upper crustal rocks formed during early to middle Paleogene time and exhumed during middle Paleogene to Miocene time. The tectonic evolution of the belt is divided into four stages, D0rs, D1, D2rs, and D3, based on their characteristic deformation, metamorphism, and igneous activity. The premetamorphic and igneous stage (D0) involves tectonic thickening of an uppermost Cretaceous and earliest Tertiary accretionary complex, including oceanic materials in the lower part of the complex. D1 is the stage of prograde metamorphism with increasing temperatures at a constant pressure during an early phase, and with a slight decrease of pressure at the peak metamorphic phase, accompanying flattening of metamorphic rocks and intrusions of mafic to intermediate igneous rocks. At the peak, incipient partial melting of pelitic and psammitic gneisses took place in the amphibolite–granulite facies transition zone, the melt and residuals cutting the foliations formed by flattening. In the deep crust, large amounts of S-type tonalite magma formed by crustal anatexis, intruded into the granulite facies gneiss zone and also into the upper levels of the metamorphic sequence during the subsequent stage. During D1 stage, mafic and intermediate magmas supplied and transported heat to form the arc-type crust and at the same time, the magmatic underplating caused extensional doming of the crust, giving rise to flattening and vertical uplifting of the crustal rocks. D2 stage is characterized by subhorizontal top-to-the-south displacement and thrusting of lower to upper crustal rocks, forming a basal detachment surface (décollement) and duplex structures associated with intrusions of S-type tonalite. Deformation structures and textures of high-temperature mylonites formed along the décollement, as well as the duplex structures, show that the D2 stage movement occurred under a N-S trending compressional tectonic regime. The depth of intra-crustal décollement in the Hidaka belt was defined by the effect of multiplication of two factors, the fraction of partial melt which increases downward, and the fluid flux which decreases downward. The crustal décollement, however, might have extended to the crust-mantle boundary and/or to the lithosphere and asthenosphere boundary. The subhorizontal movement was transitional to a dextral-reverse-slip (dextral transpression) movement accompanied by low-temperature mylonitization with retrograde metamorphism, the stage defined as D3. The crustal rocks from the basal décollement to the upper were tilted eastward on the N–S axis and exhumed during the D3 stage. During D2 and D3 stages, the intrusion of crustal acidic magmas enhanced the crustal deformation and exhumation in the compressional and subsequent transpressional tectonic regime.  相似文献   

7.
本研究利用中国国家地震台网336个固定地震台站记录的远震波形资料,通过P波接收函数H-κ分析估算了中国华南地区的地壳厚度和地壳平均波速比.研究结果显示,地壳厚度约为25~46 km,整体表现西深东浅的变化特点.研究区地壳厚度变化分别与布格重力异常和地形呈现负相关和正相关.扬子块体东部显示较低地壳波速比(<1.7)可能与地表沉积岩的存在相关.四川盆地内部的平均地壳波速比(约1.71~1.8)与全球大陆地盾/克拉通地区相当.但其周围地区地壳平均波速比明显增高(1.81~1.95),推测可能是克拉通形成过程中岩浆的底侵引起下地壳组分以铁镁质麻粒岩为主.华夏块体西部表现为薄的地壳厚度和低的地壳平均波速比(1.65~1.75),暗示该区基性下地壳物质的缺失可能与增厚的地壳发生拆沉有关.华夏块体东南段呈现出较高的地壳平均波速比(约1.77~1.86),地壳组成以中基性铁镁质为主,推断可能与晚中生代铁镁质岩浆底侵作用密切相关.  相似文献   

8.
马尼拉俯冲带北段增生楔前缘构造变形和精细结构   总被引：1，自引：0，他引：1       下载免费PDF全文
马尼拉俯冲带是南海的东部边界,记录了南海形成演化的关键信息,同时也是地震和海啸多发区域.本文利用过马尼拉俯冲带北段的高分辨率多道地震剖面,分析了研究区内海盆和海沟的沉积特征,精细刻画了区内增生楔前缘的构造变形、结构以及岩浆活动特征.研究区内增生楔下陆坡部分由盲冲断层、构造楔和叠瓦逆冲断层构成,逆冲断层归并于一条位于下中新统的滑脱面上,滑脱面向海方向的展布明显受到增生楔之下埋藏海山和基底隆起的影响;上陆坡的反射特征则因变形强烈和岩浆作用而难以识别;岩浆活动开始于晚中新世末期并持续至第四纪.马尼拉俯冲带北段增生楔的形成时间早于16.5 Ma,并通过前展式逆冲向南海方向扩展;马尼拉俯冲带的初始形成时间可能在晚渐新世,而此时南海海盆扩张仍在持续.南海东北缘19°N-21°N区域为南海北部陆坡向海盆的延伸,高度减薄的陆壳的俯冲造成马尼拉海沟北段几何形态明显地向东凹进.  相似文献   

9.
Tadahiro  Shibata  Yuji  Orihashi  Gaku  Kimura  Yoshitaka  Hashimoto 《Island Arc》2008,17(3):376-393
Abstract   Growth of an accretionary prism is effected by frontal accretion and deep subsurface underplating at the base of the prism. A systematic oceanward and structurally downward younging of underplated sequences is expected as the prism thickens and grows. To test this hypothesis and explore the processes of underplating, the U–Pb ages of zircon grains contained in underplated mélange sequences or packages of the Late Cretaceous and early Paleogene accretionary complex of the Shimanto Belt, southwest Japan, were determined using LA–ICP–MS laser technology. The results document systematic but intermittent younging ages within a single underplated mélange package. This finding suggests that underplating took place episodically during a period of several million years and that between episodes of underplating, a large amount of sediment was subducted to depths much greater than where underplating was occurring.  相似文献   

10.
Yuji  Ichiyama  Akira  Ishiwatari  Kazuto  Koizumi  Yoshito  Ishida  Sumiaki  Machi 《Island Arc》2007,16(3):493-503
Abstract   Permian basalt showing typical spinifex texture with >10 cm-long olivine pseudomorphs was discovered from the Jurassic Tamba accretionary complex in southwest Japan. The spinifex basalt occurs as a river boulder accompanied by many ferropicritic boulders in a Permian chert-greenstone unit. Groundmass of this rock is holocrystalline, suggesting a thick lava or sill for its provenance. Minor kaersutite in the groundmass indicates a hydrous magma. The spinifex basalt, in common with the associated ferropicritic rocks, is characterized by high high field strength element (HFSE) contents (e.g. Nb = 62 ppm and Zr = 254 ppm) and high-HFSE ratios (Al2O3/TiO2 = 3.9, Nb/Zr = 0.24 and Zr/Y = 6.4) unlike typical komatiites. The spinifex basalt and ferropicrite might represent the upper fractionated melt and the lower olivine-rich cumulate, respectively, of a single ultramafic sill (or lava) as reported from the early Proterozoic Pechenga Series in Kola Peninsula. Their parental magma might have been produced by hydrous melting of a mantle plume that was dosed with Fe- and HFSE-rich garnet pyroxenite. The spinifex basalt is an evidence for the Pechenga-type ferropicritic volcanism taken place in a Permian oceanic plateau, which accreted to the Asian continental margin as greenstone slices in Jurassic time.  相似文献   

11.
Francesca  Liberi  Lauro  Morten  Eugenio  Piluso 《Island Arc》2006,15(1):26-43
Abstract Slices of oceanic lithosphere belonging to the neo‐Tethys realm crop out discontinuously in the northern Calabrian Arc, Southern Apennines. They consist of high‐pressure–low‐temperature metamorphic ophiolitic sequences formed from metaultramafics, metabasites and alternating metapelites, metarenites, marbles and calcschist. Ophiolites occupy an intermediate position in the northern Calabrian Arc nappe pile, situated between overlying Hercynian continental crust and the underlying Apenninic limestone units. In the literature, these ophiolitic sequences are subdivided into several tectonometamorphic units. Geochemical characteristics indicate that metabasites were derived from subalkaline basalts with tholeiitic affinity (transitional mid‐oceanic ridge basalt type), and a harzburgitic‐lherzolitic protolith is suggested for the serpentinites. The pressure–temperature‐deformation paths of the metabasites from different outcrops display similar features: (i) the prograde segment follows a typical Alpine geothermal gradient up to a metamorphic climax at 350°C and 0.9 GPa and crystallization of the high‐pressure mineral assemblage occurs along a pervasive foliation developed during a compressive tectonic event; and (ii) the retrogression path can be subdivided in two segments, the first is characterized by nearly isothermal decompression to approximately 400°C and 0.3 GPa and the second follows a cooling trajectory. During low‐pressure conditions, a second deformation event produces millimetric to decametric scale asymmetric folds that describe west‐verging major structures. The third deformation event is characterized by brittle extensional structures. The tectonometamorphic evolution of the ophiolitic sequences from the different outcrops is similar. Both thermobarometric modeling and tectonic history indicate that the studied rocks underwent Alpine subduction and exhumation processes as tectonic slices inside a west‐verging accretionary wedge. The subduction of oceanic lithosphere was towards the present east; therefore, the Hercynian continental crust, overthrusted on the ophiolitic accretionary wedge after the neo‐Tethys closure, was part of the African paleomargin or a continental microplate between Africa and Europe.  相似文献   

12.
穿过天津地区张渤带的长86 km、NE向深地震反射剖面揭示了该区清晰的地壳精细结构图像和断裂的深浅构造特征,为研究张渤地震构造带的深部孕震环境和构造模式提供了地震学证据,对探讨晚中生代以来华北裂陷盆地的深部动力学过程及演化具有重要意义.结果表明,天津地区张渤带地壳以结晶基底反射TG为界,分为上下两部分;上地壳反射波组丰富,分层特征明显,界面起伏形态清楚,清晰地刻画出冀中坳陷新生代沉积分层、箕状沉积凹陷的底界、潮白河断裂、蓟运河断裂及丰台—野鸡坨断裂的几何结构;地壳内部结晶基底（TG）至Moho之间,显示出近于"反射透明"的地震波场特征,无明显震相,这与华北其他地区的深地震反射剖面结果明显不同;地壳厚度为30.0~34.5 km,总体变化趋势为中段地壳厚而南北端相对较薄,Moho在横向上显示出明显的不均匀和横向间断特征,在Moho被错断处存在两个明显的反射事件RA和RC,RA可能是软流圈热物质上涌的侧向残留物,叠层状反射震相RC则表现出壳幔过渡带特征;剖面揭示了2条错断Moho的超壳深大断裂（FD1和FD2）和9条上地壳断裂,深大断裂应是软流圈热物质上涌,造成上地幔隆起而形成的,上地壳断裂与地壳垂直运动及侧向引张力有关;超壳深断裂（FD1和FD2）为本区深部热物质的上涌与能量交换提供了通道,而与之对应的地壳浅部断裂（F3和F9）,则为能量调整提供了可能的条件,断裂邻近区域可能是未来发生强震的地区,值得注意.  相似文献   

13.
Tanlu fault zone(TLFZ)is the largest active fault zone in eastern China.It is characterized by complex tectonic evolution and multiple faults and marks the boundary between the North and South China blocks.An in-depth understanding of the distinct crustal structures of both parts of the TLFZ will provide valuable insights into the lithospheric and crustal thinning in eastern China,extensive magmatism since the Mesozoic,and formation mechanisms of metallogenic belts along the Yangtze River.In this study,a two-layer H-κ stacking approach was adopted to estimate the thicknesses of the sediment and crystalline crust as well as the corresponding vp/vs ratios based on high-quality teleseismic P-wave receiver functions recorded by permanent and temporary stations in and around the TLFZ.The geological units in the study region were delineated,especially the crustal structures beneath extensive sedimentary basins on both sides of the TLFZ.The following conclusions can be drawn:(1)The crustal thickness in and around the TLFZ greatly varies depending on the segment.In the northern segment,the crust is relatively thin beneath the eastern part of the Songliao Basin,a broad uplift of the Moho can be observed,and the Moho descends from south to north.The crust below the central and southern segments becomes thinner from west to east.The thickness of the crust is less than 30 km toward the eastern side of the boundary between the Jiangsu and Anhui provinces,that is,significantly thinner than in other areas.In terms of the vp/vs ratios,high anomalies were detected in the central-southern segments of the TLFZ,indicating the upwelling of deep mantle magma via deep faults.(2)Positive isostatic gravity anomalies were observed in the eastern part of the northern segment of the TLFZ and in the eastern part of the Suwan segment.The crustal thickness is smaller than that obtained from the Airy model of isostasy.This suggests that the lower crust in this area may have experienced intensive transformation processes,which may be related to crustal thinning(caused by crustal extension)and the strong uplift of the mantle in eastern China.The isostatic gravity anomalies between the eastern and western parts of the TLFZ indicate that the fault zone plays a dominant role in controlling the development of the deep crustal structure.(3)Significant crustal thinning was observed beneath the eastern part of the boundary between the Jiangsu and Anhui provinces in the southern segment of the TLFZ,suggesting that this area is prone to lithospheric thinning of the North China Craton.Due to the subduction,compression,and retreat of the Paleo-Pacific Plate during the Yanshanian Period as well as the dehydration of subducting oceanic crust(within subduction zones),the asthenosphere and oceanic crust in eastern China partially melted,resulting in mantle enrichment.The basic magma from the mantle is accumulated at the base of the crust,leading to magmatic underplating.In areas with weak topography toward the east of the TLFZ,magma rises to the upper crust and surface,resulting in the enrichment of multiple'metal deposits in this area.  相似文献   

14.
Haixiang  Zhang  Hecai  Niu  Hiroaki  Sato  Xueyuan  Yu  Qiang  Shan  Boyou  Zhang  Jun'ichi  Ito  Takashi  Nagao 《Island Arc》2005,14(1):55-68
Abstract   Volcanic rocks consisting of adakite and Nb-enriched basalt are found in the early Devonian Tuoranggekuduke Group in the northern margin of the Kazakhstan-Junggar Plate, northern Xinjiang, northwest China. The geochemical characteristics of the andesitic and dacitic rocks in this area resemble that of adakites. The relatively high Al2O3, Na2O and MgO content and Mg♯ values indicate that the adakites were generated in relation to oceanic slab subduction rather than the partial melting of basaltic crust. A slightly higher SrI and a lower ɛ Nd( t  = 375 Ma) compared to adakites of mid-oceanic ridge basalt (MORB) imply that slab sediments were incorporated into these adakites during slab melting. The Nb-enriched basalt lavas, which are intercalated in adakite lava suite, are silica saturated and are distinguished from the typical arc basalts by their higher Nb and Ti content (high field strength element enrichment). They are derived from the partial melting of the slab melt-metasomatized mantle wedge peridotite. Apparently, positive Sr anomalies and a slightly higher heavy rare earth element content in these adakites compared to their Cenozoic counterparts indicate that the geothermal gradient in the Paleo-Asian Oceanic subduction zone and the depth of the Paleo-Asian Oceanic slab melting are between those of their Archean and Cenozoic counterparts. The distribution of the adakites and Nb-enriched basalts in the northern margin of the Kazakhstan-Junggar Plate, northern Xinjiang, indicates that the Paleo-Asian Oceanic Plate subducted southward beneath the Kazakhstan-Junggar Plate in the early Devonian period.  相似文献   

15.
马尼拉海沟北段俯冲带输入板块的不均一性   总被引：3，自引：1，他引：2       下载免费PDF全文
本文整合了横跨马尼拉海沟北段的21条多道地震层位信息、海底地形以及天然地震数据,分析了研究区内的输入板块性质差异及其对增生楔变形和地震活动性的影响.研究发现,沿马尼拉海沟北段的输入板块在地壳性质、基底起伏和沉积物厚度上存在明显的自北向南的差异:(1)最北段基底埋深大,上覆沉积物厚,地壳厚度较薄,地壳性质可能为初始南海洋壳或者圈闭的菲律宾海洋壳;(2)中段基底埋深浅,上覆沉积物薄,地壳厚度大,地壳属性表现为过渡壳性质,受到岩浆活动的影响,初始的地壳性质可能为华南陆块张裂分离出的微小陆壳块体,或者是南海洋壳;(3)南段基底埋深和沉积物厚度介于中间,存在明显的地磁条带,地壳性质为正常的南海洋壳.这一输入板块性质的不均一性可解释该区的特殊增生楔变形现象,如恒春弱变形带的出现,向海方向内凹的海沟形态以及上陆坡海底的大幅抬升等,同时也影响了研究区内的板片俯冲形态和发震构造的地震活动性.研究结果证实了沿马尼拉海沟北段存在南北向的地球物理性质的差异,但对于地壳属性的最终厘定还需要更多的地质与地球化学证据.  相似文献   

16.
兴蒙造山带诺敏河火山群地壳厚度与波速比研究   总被引：1，自引：1，他引：0       下载免费PDF全文
利用布设于兴蒙造山带诺敏河火山群地区的宽频带流动地震台站资料,基于接收函数方法,获取了该地区的地壳厚度与波速比值.研究结果显示,该地区的地壳厚度介于32~38 km,莫霍面深度在空间上分布特征与五大连池为中心的火山带分布具有较好的一致性：沿着火山带延展方向地壳较薄.该地区的波速比介于1.74~1.84,波速比在空间上与地壳厚度变化具有一致性：高波速比主要集中于靠近五大连池火山带地区,向诺敏河火山和小古里河火山延展.研究认为：诺敏河火山与五大连池火山带可能具有相同的岩浆来源,可能与富钾岩石圈地幔拆沉作用造成的地幔热物质上涌有关.研究区地壳厚度与波速比呈现负相关关系,暗示该地区可能发生过岩浆底侵作用.  相似文献   

17.
Abstract The Jurassic Tamba accretionary complex is divided into two tectono‐stratigraphic suites (Type I and II nappe groups), which are further divided into six complexes (nappes) each of which is characterized by a rock sequence of Late Paleozoic greenstone/limestone, Permian to Jurassic chert and Jurassic terrigenous clastic rocks. The mode of occurrence of the greenstone is divided into two types. The major basal type occurs as a large coherent slab associated with Permian chert and limestone, constituting the basal part of each complex, and the minor mixed type occurs as fragmented allochthonous greenstone blocks and lenses mixed with chert, limestone and sandstone in the Jurassic mudstone matrix. Most of the basal greenstones have uniform geochemical characteristics, which indicate enriched‐mid‐oceanic ridge basalt (MORB) affinity. Their geochemical compositions are akin to the reported Permo‐Carboniferous and Triassic oceanic plateau basalts. Mixed greenstones are divided into two petrochemical types: (i) tholeiitic basalt with normal‐MORB affinity, which is predominant in the uppermost complex of the Type II suite (upper nappe group); and (ii) tholeiitic and alkalic basalts of oceanic island or seamount origin, which are common in all complexes of the Tamba Belt. Geochemical characteristics of the greenstones thus vary in accordance with their occurrences and the structural units to which they belong. This relationship reflects the difference in topographic relief and crustal thickness of the accreted oceanic edifices – the remnants of thick oceanic plateau crust tended to accrete to the continental margin as a large basal greenstone body, whereas thin normal oceanic crust with small seamounts or oceanic islands accreted as mixed greenstones because of their mechanical weakness. The Type II suite (upper nappe group) contains the basal and mixed greenstones, whereas the Type I suite (lower nappe group) includes only mixed greenstones. This distinction may reflect the temporal change of subducting edifices from a thick oceanic plateau to a thin normal oceanic crust, and suggests that the accretion of a large oceanic plateau may be responsible for building accretionary complexes with thick basal greenstones slabs.  相似文献   

18.
Abstract Greenstones, representing remnants of paleo-oceanic crust, occur in Permian and Jurassic accretionary complexes of the Inner Zone in the Southwestern Japan arc. The formation age of most of the greenstones is early Carboniferous, based on fossil ages for overlying limestones and Sm-Nd isotope ages of the greenstones themselves. The geochemistry of such greenstones is similar to those of present-day oceanic islands. Greenstones of the Permian accretionary complex (Akiyoshi belt) are alkalic and tholeiitic in composition. Some alkali basalts show peculiar features from an EM-1 mantle source, such as the Gough Island and Tristan da Chunha basalts in the South Atlantic. Greenstones of the Jurassic accretionary complex (Tamba belt) are also alkali and tholeiitic basalts with both basalt types in the northern part of the Tamba belt coming from strongly depleted characters similar to a mid-ocean ridge basalt source mantle. The variable geochemistry of the oceanic basalts is explained by hypothesis on existence of a Carboniferous mantle plume below the spreading ridge which divides the Farallon and Izanagi plates. The Akiyoshi belt seamounts and/or oceanic islands of the Farallon plate and Tamba belt seamounts and/or oceanic islands of the Izanagi plate formed simultaneously by the upwelling of the thermal plume. Some part of the Akiyoshi belt basalts originated locally from an EM-1 mantle source, while basalts from the northern parts of the Tamba belt have a normal-type mid-ocean ridge basalt (N-MORB) source component. Existence of an N-MORB signature is consistent with the presence of a spreading center in a Carboniferous 'Pacific Ocean' that caused separation of the Farallon and Izanagi plates. Disparity in accretion ages of the basaltic rocks in the Permian and Jurassic may have been caused by differences in the relative motion of the two plates.  相似文献   

19.
Crustal structures around the Yamato Basin in the southeastern Sea of Japan, inferred from recent ocean bottom seismography (OBS) and active-source seismological studies, are reviewed to elucidate various stages of crustal modification involved from rifting in the crust of the surrounding continental arc to the production of oceanic crust in the Yamato Basin of the back-arc basin. The northern, central, and southern areas of the Yamato Basin have crustal thicknesses of approximately 12–16 km, and lowermost crusts with P-wave velocities greater than 7.2 km/s. Very few units have P-wave velocities in the range 5.4–6.0 km/s, which corresponds to the continental upper crust. These findings, combined with previous geochemical analysis of basalt samples, are interpreted to indicate that a thick oceanic crust has been formed in these areas of the basin, and that this oceanic crust has been underplated by mantle-derived magma. In the central Yamato Basin, the original continental crust has been fully breached and oceanic crust has been formed. Conversely, the presence of a unit corresponding to the continental upper crust and the absence of a high-velocity part in the lower crust implies that the southwestern edge of the Yamato Basin has a rifted crust without significant intrusion. The Oki Trough has a crust that is 17–19 km thick with a high-velocity lower crust and a unit corresponding to the continental upper crust. The formation of the Oki Trough resulted from rifting with magmatic intrusion and/or underplating. We interpret these variations in the crustal characteristics of the Yamato Basin area as reflecting various instances of crustal modification by thinning and magmatic intrusion due to back-arc extension, resulting in the production of a thick oceanic crust in the basin.  相似文献   

20.
A fully instrumented physical model was designed and built to reproduce development by surging and monitor its effects during surging and after development. The model simulates a horizontal layer in a confined aquifer with control of vertical overburden pressure. An automatic apparatus produced development by surging in successive phases up to 24 hours. Aquifer tests in steady-state conditions were performed between successive phases. The paper reports the main results of three experiments performed with Johnson screens 200 mm in diameter; they had slot sizes between the D54 and D70 of the aquifer soil. This soil was placed under controlled conditions, and initial homogeneity was obtained as confirmed by initial control tests. Pore pressures (and thus hydraulic heads) were continuously monitored during development phases and aquifer tests by 22 electronic piezometers at distances between 0 and 1 m from the screen. These piezometers measured water pressures every 0.1 s when required. Solid particles passing through the screen were recovered to study the solid yield and the gradation of particles. Positive and negative values of local gradients reached values up to 400 close to the screen at the beginning of development and decreased with time of development. These high values produced high seepage forces displacing particles in the aquifer. The well yield was increased by a factor of 6 after development. These model test results confirmed empirical criteria on entrance velocity, internal stability criteria, and field values of "sand" production by development. In addition, they enabled a quantification of skin effects to be considered in interpreting an aquifer test.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号