共查询到20条相似文献，搜索用时 78 毫秒
1.
High-resolution transmission electron microscopy (HRTEM) measurements of the thickness of white mica crystallites were made on three pelite samples that represented a prograde transition from diagenetic mudstone though anchizonal slate to epizonal slate. Crystallite thickness, measured normal to (001), increases as grade increases, whereas the XRD measured 10 Å peak-profile, the Kubler index, decreases. The mode of the TEM-measured size population can be correlated with the effective crystallite size N(001) determined by XRD. The results indicate that the Kubler index of white mica crystallinity measures changes in the crystallite size population that result from prograde increases in the size of coherent X-ray scattering domains. These changes conform to the Scherrer relationship between XRD peak broadening and small crystallite size. Lattice strain broadening is relatively unimportant, and is confined to white mica populations in the diagenetic mudstone. Rapid increases in crystallite size occur in the anchizone, coincident with cleavage development. Changes in the distribution of crystallite thickness with advancing grade and cleavage development are characteristic of grain-growth by Ostwald ripening. The Kubler index rapidly loses sensitivity as an indicator of metapelitic grade within the epizone. 相似文献
2.
T.G. BLENKINSOP 《Journal of Metamorphic Geology》1988,6(5):623-628
Abstract Two major problems which exist in the use of illite crystallinity to define low-grade metamorphic zones are the variety of values chosen for the zone boundaries and the persistent use of three different indices of crystallinity. Although measurement techniques, which cause much of the interlaboratory variation, can be standardized, it is shown that there is, nevertheless, significant additional variation which demands calibration on standards. The greatest variations are due to choices of different absolute values of crystallinity to define zone boundaries. The problem of relating measurements between different indices is approached by fitting mathematical relationships to pairs of measurements from the same sample. A power–law relationship is a satisfactory fit to the Kubler–Weaver and Weaver–Weber pairs, while the Kubler–Weber indices are linearly related. These relationships are used to transform definitions of the diagenetic zone, anchizone and epizone from one index to the others, although they apply strictly only to the data set from which they are derived. This results in compatibility between the three zones and shows that previous definitions to the anchizone in different indices have been chosen at incompatible values. The boundaries of Kubler's anchizone (0.42 and 0.25 Δ2θ) are 0.4 and 0.215 Δ2θ in this study, which become 5.1 and 14.6 in the Weaver index and 278 and 149 in the Weber index. An error analysis shows that percentage errors in both Kubler and Weaver indices increase with crystallinity; the Kubler measurements are marginally preferred at all grades. 相似文献
3.
狭缝系统与伊利石结晶度Kuebler指数的测定及相关问题讨论 总被引：4，自引：0，他引：4
根据实验结果,衍射峰半高宽随接收狭缝增大而呈二次工线线性增大。扫描速度与扫描步长的确定应遵守Ｗａｎｇ（１９９４）提出的关系式,并确定在相对误差小于〈５％的范围内。固定样品条件,选定最优实验条件下使用国际标样标定系统偏差是伊利石结晶测量中必不可少的重要步骤。不固定样品条件和实验条件,同一样品的伊利石工值将因条件的变化而不同;固定样品和实验条件而不使用国际标样标定系统偏差,则无法与他人数据进行对比,其 相似文献
4.
P. ÁRKAI 《Journal of Metamorphic Geology》1991,9(6):723-734
Abstract Fairly strong (r= 0.75–0.85) positive linear correlations were found between crystallinity indices (peak widths) measured on the first two basal reflections of chlorite and those of illite–muscovite in <2-μm fractions of a representative shale–slate–phyllite series from Palaeozoic and Mesozoic formations of northeast Hungary. The metamorphic grade ranges from late or deep diagenesis through anchizone to epizone conditions. Chlorite crystallinity values measured on air-dried and ethylene-glycol-solvated samples suggest that the effects of expandable interlayers are negligable, especially in the higher grade (～temperature) part of the series. However, the greater scattering of crystallinity values for the chlorite 001 reflection compared to those of the 002 reflection may be related to the effects of minor amounts of interlayered and/or discrete smectite and/or vermiculite. With increasing metamorphic grade and advancing equilibrium recrystallization, the chlorite compositions in different samples become more homogenous. No correlation exists between crystallinity and changes in chlorite composition as estimated from the intensity ratios of basal reflections. Hence an increase of domain size and a decrease of lattice distortion with increasing grade (～temperature) may be decisive factors affecting chlorite crystallinity. Chlorite crystallinity can be applied as a reliable regional, statistical technique complementary with, or instead of, the illite crystallinity method. The illite and chlorite crystallinity scales used here are related to Kübler's epi-, anchi- and diagenetic zones and correlated with coal rank, conodont colour alteration and mineral facies data. As the effects of the detrital white mica can be observed even in the <2-μm fractions of anchizonal metapelites, the anchizone boundaries determined solely on the base of ‘fixed’illite crystallinity values may vary with amounts of detrital and newly formed muscovite–illite. Hence a complex approach utilizing more than one method for determination of grade is preferred for petrogenetic purposes, even if relationships between crystallinity scales, coal rank and mineral facies also vary strongly in different tectonic settings and lithologies. 相似文献
5.
A multiple inter-laboratory calibration with illite Kübler?CFrey?CKisch ??crystallinity?? index and related standards is presented and compared with CIS standards used in the last two decades in very low-grade metamorphic studies. Comparing CIS values with KI standards the CIS values show a higher full width at half-high maximum peak intensity. In all cases due to broadening effects on the Kübler-index, zone-limits, specifically the diagenetic zone/anchizone boundary, a shift is produced in geographical dimensions in a metamorphic map-view. Combining standardised Kübler-index and vitrinite?Cbituminite reflectance measurements a coherent data set for compilation studies can be generated from the data of different research groups. This attempt to establish a unified database of independent measures to determine diagenetic/metamorphic zones with different analytical instrumental methods are indispensable to present metamorphic maps at very low-grade conditions. Given that the Kübler?CFrey?CKisch standards are difficult to preserve for the future and presumably they will be replaced with ongoing time by the CIS standards, a rescue of the laboratory settings from Frey, Kübler and others is done. After having compiled the Kübler-index??vitrinite reflectance zones in the Alps for the ??New Metamorphic Map of the Alps??, the presented calibration and inter-laboratory correlation gives a chance to save the KI values obtained by very different preparation procedures applied. This is an important step for further studies in an area like the Central Alps with a very high data grid. This correlation study will also make it possible that nearly 90?% of Kübler-index data from Switzerland can be compared in future work. Using the same calibration and preparation technique no fundamental problem in data comparison is achieved for the vitrinite/bituminite reflectance data operation. The main problem arises when rock maturity is compared with CIS calibrated Kübler-index values. Kübler-index values obtained by the so-called CIS calibration are not compatible with Kübler?CFrey?CKisch (árkai, Aprahamian, Brime, Ferreiro M?hlmann, H. Krumm, Leoni, Petschick) calibrated Kübler-Indices. Applying both standardisation approaches for field studies, partially different results are obtained. 相似文献
6.
Analysis of the precision of the illite 'crystallinity'technique shows that machine errors are <5%, while intra- and inter-sample errors are variable but are up to 12% and 14%, respectively (1σ). Consideration of this error analysis shows that the isocryst approach, which involves close contouring (e.g. 0.03 Δ2°) of illite 'crystallinity'data, has a very low degree of confidence (<0.5) and thus is not regarded as statistically valid. If contouring is to be undertaken with a high degree of confidence (>0.8) it is necessary that contours should be at intervals of 0.1 ΔΘ2°, which is equivalent to subdivision of the anchizone into upper and lower units. Where previous interpretations have relied upon an isocryst method of contouring at less than 0.1 ΔΘ2° the conclusions must be regarded as unsubstantiated.
Centrifuge separation of clay fractions (based on a Stokes'law application) gives separations in which a significant, but variable, percentage of grains have long axes greater than the size calculated. For the typical <2-μm fraction utilized, some 20% of grains lie in the 2–4-μm range, although the proportion is not believed to have a significant effect upon 'crystallinity'values. The formula is applicable for grain-sizes down to 0.5 μm. Illite 'crystallinity'values on samples prepared by an ultrasonic disaggregation method show a small increase on those prepared by ball mill crushing. The differences are minimal at the epi/anchizone level but increase to some 10% at the anchizone/diagenetic level. The effect on grade determinations is again thought to be minimal and indicates that concern over unsuitability of the ultrasonic disaggregation method is unfounded. 相似文献
Centrifuge separation of clay fractions (based on a Stokes'law application) gives separations in which a significant, but variable, percentage of grains have long axes greater than the size calculated. For the typical <2-μm fraction utilized, some 20% of grains lie in the 2–4-μm range, although the proportion is not believed to have a significant effect upon 'crystallinity'values. The formula is applicable for grain-sizes down to 0.5 μm. Illite 'crystallinity'values on samples prepared by an ultrasonic disaggregation method show a small increase on those prepared by ball mill crushing. The differences are minimal at the epi/anchizone level but increase to some 10% at the anchizone/diagenetic level. The effect on grade determinations is again thought to be minimal and indicates that concern over unsuitability of the ultrasonic disaggregation method is unfounded. 相似文献
7.
关于伊利石结晶度Kübler指数的误差计算 总被引：4，自引：0，他引：4
本文讨论了测量Kubler指数时产生的误差来源;提出以统计学方法描述“Strip型”衍射峰的半高宽度及其误差大小;以衍射强度、衍射峰形态与测量条件关系式描述“Digital型”衍射峰半高宽的测量误差大小。并特别提出了数字化衍射仪平滑操作产生的误差原理和总体趋势。提出的原理及公式,不仅适合半高宽的误差计算,也适合于其他衍射参数的分析计算,并可用于数字化光谱分析计算中。 相似文献
8.
WANG Hejing LU Anhuai CHEN TaoThe Key Laboratory of Orogenic Belts Crustal Evolution Ministry of Education Chin School of Earth Space Sciences Peking University Beijing China 《《地质学报》英文版》2002,76(4):429-436
X-ray diffraction (XRD) peaks in a low-angle diffraction section of clay minerals, especially those of authigenic origin, have broadening and tailing features in shape. Using the five basic parameters, peak position, peak height, width, shape coefficient and asymmetry, to describe an XRD peak is more accurate, comprehensive and integrated than using only 3 of them, position, height and width. Following the concept of the five basic parameters of an XRD peak, the program Decoform proposed in this study provides more information in mineralogical analyses by fitting actual XRD profiles. In combination with the HW-IR plot, Decoform can be systematically and accurately used in the comprehensive analyses of crystallinity, domain size, lattice strain and quantitative phase. It is also of value for the geological investigations of diagenesis, metamorphism, basin maturity, structural stress field and so on. 相似文献
9.
Abstract A diagenctic through anchizone to epizone transition is demonstrated in pelitic rocks of the Lower Palaeozoic marginal basin of Wales by examination of variations in phyllo-silicate mineralogy, illite crystallinity and bo parameter of white micas. This transition represents a temperature range from ∼ 150°C to ∼ 400°C and the metamorphism is of a low-pressure facies series type, with a geothermal gradient of ∼ 40°Ckm-1 . Variations in grade can be correlated largely with the original basin and shelf form, suggesting a depth-related metamorphism. However, in areas closer to the site of Caledonian plate collision an increasingly syn-tectonic metamorphic event is apparent.
Correlation of pelite data with metabasite assemblages is variable, the most consistent relationship being between epizone crystallinity values andepidote-actinolite (greenschist facies) assemblages. Diagenetic clay mineral assemblages are found associated with prehnite-pumpellyite assemblages in metabasites and it is suggested that the latter represent non-buffered, and therefore non-diagnostic, assemblages. 相似文献
Correlation of pelite data with metabasite assemblages is variable, the most consistent relationship being between epizone crystallinity values andepidote-actinolite (greenschist facies) assemblages. Diagenetic clay mineral assemblages are found associated with prehnite-pumpellyite assemblages in metabasites and it is suggested that the latter represent non-buffered, and therefore non-diagnostic, assemblages. 相似文献
10.
William D. Stuart 《Tectonophysics》1979,52(1-4)
Episodic slip on shallow crustal faults can be qualitatively explained by postulating a fault constitutive law that is the superposition of two limiting material responses: (1) strain softening after peak stress during large strain rates, and (2) strength (peak stress) recovery during aging at small strain rates. A single law permits a variety of seismic and aseismic phenomena to occur over a range of space and time scales. Specific cases are determined by the spatial variation of material constants, recent deformation history, crustal rigidity, and remote forcing. 相似文献
11.
FRANK PREUSSER REAS BLEI HANSRUEDI GRAF CHRISTIAN SCHLÜCHTER 《Boreas: An International Journal of Quaternary Research》2007,36(2):130-142
Proglacial deposits from three independently dated sites in the Swiss lowlands were investigated by optically stimulated luminescence (OSL) to test the reliability of the applied dating approach. Using the single-aliquot regenerative-dose technique applied to small aliquots of quartz revealed that in all samples the OSL signal was differentially bleached prior to deposition. A statistical approach is introduced to extract the fraction of aliquots in which the OSL was apparently set to zero at deposition. The statistical treatment provided OSL ages in good consistency with independent age control. However, some uncertainties remain with this approach, since it is difficult to assess the natural scatter caused by dose-rate inhomogeneity exactly. The available data set implies that glaciers reached the Swiss lowlands prior to about 25 000 yr ago. Previously published data from other sites demonstrate that glaciers were present in lowland Switzerland up to about 20000 yr ago. Furthermore, one OSL date of about 70 000 yr for proglacial outwash sediments points to the presence of the Rhône Glacier in the Lake Neuchâtel area during the middle part of the Late Pleistocene. 相似文献
12.
运用X射线衍射分析技术，计算了成岩带、近变质带粘土矿物C^*方向的粒度。根据阿尔卑斯造山带前陆碎屑岩粘土矿物粒度与伊利石结晶指数的关系，推导出了伊利石、绿泥石、蒙脱石、伊蒙混层、高岭石和叶蜡石的c^*方向粒度变化趋势曲线。结果表明，大多数产于成岩带和近变质带的粘矿物其c6*方向粒工为几至几十纳米。成岩带和近为质带是一维天然纳为级土帮物的产地。 相似文献
13.
基于不同层理角度的页岩巴西劈裂试验,利用高速摄像系统和声发射系统,对页岩力学特性、裂纹扩展及声发射特征的层理效应进行了深入研究。结果表明：（1）页岩巴西劈裂破坏过程可以分为压密、弹性和破坏3个阶段;（2）页岩抗拉强度、劈裂模量和应力峰值时变形的各向异性特征明显,层理角度 30°时,层理效应最为明显, 90°时影响最小;（3） 0°和 15°时试样的裂纹破坏面基本是沿着层理面, 30°时裂纹面交切层理面,与加载基线面重合, 45°～90°的各试样的断裂面呈不同程度的偏离加载基线面,为弧面或曲面;（4） 30°和 45°为破坏机制转化角,其中 30°为沿着层理面压致性张拉开裂转化为交切层理面开裂的转化角, 45°为交切层理面开裂转化为交切层理面且沿着层理面不同程度的剪切滑移开裂的转化角;（5）声发射活动性和能量释放随层理角度的增加而加强,主要因为受层理角度的影响,其破坏机制不同,这也进一步验证了页岩随层理角度的变化,其破坏机制的各向异性。能率峰值与抗拉强度具有很好的线性关系,表明声发射能率峰值能很好地反映岩石抗拉伸破坏的程度。 相似文献
14.
Late Pennsylvanian sedimentary rocks in the Narragansett basin were metamorphosed (lower anchizone to sillimanite grade) during late Paleozoic regional metamorphism at ca. 275–280 Ma. Twenty-five variably sized concentrates of detrital muscovite were prepared from samples collected within contrasting low-grade areas (diagenesis — lower greenschist facies). Microprobe analyses suggest that the constituent detrital grains are not chemically internally zoned; however, some grains within several concentrates display very narrow (<25 m), compositionally distinct, low-grade, epitaxial peripheral overgrowths. Detrital muscovite concentrates from the lower anchizone are characterized by internally concordant 40Ar/39Ar age spectra which define plateau ages of ca. 350–360 Ma. These are interpreted to date post-Devonian (Acadian) cooling within proximal source areas. Concentrates from lower grade sectors of the middle anchizone display slightly discordant spectra in which apparent ages systematically increase from ca. 250–275 Ma to define intermediate- and high-temperature plateaus of ca. 360–400 Ma. Detrital muscovite within samples from higher grade sectors of the middle anchizone and the upper anchizone are characterized by systematic low age discordance throughout both low-and intermediate-temperature increments. High-temperature ages only range up to ca. 330 Ma. Six size fractions of detrital muscovite from a sample collected within the lower greenschist facies have similarly discordant spectra, in which, apparent ages increase slightly throughout the analyses from ca. 250 Ma to 275 Ma. The detrital muscovite results are interpreted to reflect variable affects of late Paleozoic regional metamorphism. However, it is uncertain to what extent the systematic low age spectra discordance reflects intracrystalline gradients in the concentration of 40Ar and/or experimental evolution of gas from relatively non-retentive epitaxial overgrowths. However, low age discordance occurs regardless of the extent of epitaxial overgrowth. Intermediate-temperature increments evolved during 40Ar/39Ar whole-rock analyses of five slate/phyllite samples are characterized by internally consistent apparent K/Ca ratios. These are attributed to gas evolved from constituent, very fine-grained white mica. Samples from lower grade portions of the middle anchizone are characterized by intermediate-temperature apparent ages which systematically increase from ca. 275–300 Ma to ca. 360–375 Ma before evolution of a high-temperature contribution from detrital plagioclase feldspar. This age variation may reflect partial late Paleozoic rejuvenation of very fine-grained detrital material with a source age similar to that for the detrital muscovites. Slate/phyllite samples from upper sectors of the middle anchizone and from the upper anchizone were completely rejuvenated during late Paleozoic metamorphism and record intermediate-and high-temperature plateau ages of ca. 270–290 Ma. These data document that metamorphic conditions of the lower to middle biotite zone (ca. 325–350 °C) are required to completely rejuvenate intracrystalline argon systems of detrital muscovite. Therefore, the 40Ar/39Ar dating method may be useful in determination of detrital muscovite provenance and in resolution of the metamorphic evolution of low-grade terranes. 相似文献
15.
TANG Yan SANG Longkang YUAN Yanming YU Jishun ZHANG Yunpeng QI Xianmao YANG Yunlong 《《地质学报》英文版》2012,86(1):96-105
X-ray diffraction methods for estimating the metamorphic grade of diagenetic, anchizone and epizone in metapelites are reviewed and applied to samples from a 7000?m+ borehole in western China and surface samples from the surrounding Zoigê area. Kübler’s illite crystallinity (IC) measurements provide more consistent results than calculated values of percentage of illite in the I/S mixed layers and percentage of I/S mixed layers. Down-borehole IC values display a typical burial metamorphic relationship between stratigraphic level and IC. A method for preparing very low grade metamorphic maps is described, and isograds plotted on a regional geological map at selected values of IC, delineating a high temperature diagenetic zone, an anchizone, and an epizone. The map shows that IC values are controlled by stratigraphic level in the north of the study area (i.e. burial metamorphism), and proximity to an igneous intrusive body in the south (i.e. contact metamorphism). 相似文献
16.
Paul M. Tricker 《地学学报》1992,4(2):231-237
Vitrinite (woody matter) and spores are generally uncommon or absent in pre-Devonian sediments. To determine organic maturity in the Lower Palaeozoic alternative methods, such as chitinozoan reflectance, must be employed. Chitinozoa are marine, vase-shaped organic-walled microfossils of unknown affinity. The reflectance of incident light from polished chitinozoa walls can provide reliable and accurate maturity data and, due to their relative facies-independency, a high degree of resolution to regional maturity studies. Calibration of the chitinozoan reflectance scale with vitrinite reflectance enables palaeotemperature estimates to be made from pre-Devonian sediments.
The range of chitinozoan reflectance for the Welsh Basin is from under 1% to 8%. This corresponds to estimated palaeotemperatures of under 100°C to over 300°C. The regional spatial distribution of organic maturation recorded by chitinozoan reflectance in the Welsh Basin is attributed to palaeobasin form. The increase in reflectance with age in the rocks of the Myddfai Steep Belt and associated areas allows an estimation of a palaeogeothermal gradient. In the Silurian sequences around Llandovery the gradient is calculated to be in the region of 50°C km−1 . Similar gradients are derived from other studies (clay minerals, metabasite mineral assemblages, conodont colours). The results from Myddfai Steep Belt suggest the thermal peak occurred during the Acadian event.
Chitinozoan reflectivity demonstrates that, with respect to hydrocarbon generation, mature conditions occur on the palaeoplatform, where the sedimentary sequences are relatively thin. Overmature conditions are prevalent in the palaeobasin where there is a thick sedimentary pile which has been subsequently deformed. 相似文献
The range of chitinozoan reflectance for the Welsh Basin is from under 1% to 8%. This corresponds to estimated palaeotemperatures of under 100°C to over 300°C. The regional spatial distribution of organic maturation recorded by chitinozoan reflectance in the Welsh Basin is attributed to palaeobasin form. The increase in reflectance with age in the rocks of the Myddfai Steep Belt and associated areas allows an estimation of a palaeogeothermal gradient. In the Silurian sequences around Llandovery the gradient is calculated to be in the region of 50°C km
Chitinozoan reflectivity demonstrates that, with respect to hydrocarbon generation, mature conditions occur on the palaeoplatform, where the sedimentary sequences are relatively thin. Overmature conditions are prevalent in the palaeobasin where there is a thick sedimentary pile which has been subsequently deformed. 相似文献
17.
M. J. RUBENACH 《Journal of Metamorphic Geology》1992,10(3):333-346
In the Hazeldene area, situated in the Mount Isa Inlier, Queensland, the metamorphic grade changes from chlorite zone, through biotite and cordierite zones, to sillimanite/K-feldspar zone.
Microstructural studies of rocks near the sillimanite isograd demonstrate that cordierite grew early during the development of a steep foliation (S2), was replaced by biotite, andalusite and sillimanite at the metamorphic peak late in S2, and in turn by kyanite + chlorite adjacent to localized small post-D2 shear zones. Although the anticlockwise P–T–t path is well defined, the precise P–T conditions are uncertain because of problems with experimental and thermodynamic data. The best estimate for the metamorphic peak for rocks close to the sillimanite isograd is around 600° C at 4 kbar.
The metamorphism has been dated at 1544 Ma, and was synchronous with a major crustal shortening event. Because proposed extensional events occurred more than 60 Ma earlier, their contribution to the peak metamorphic thermal perturbation would have been insignificant. The syn-metamorphic Mica Creek Pegmatites, the abundance of high heat-producing elements in the nearby pre-D2 Sybella Granite, and advective heat by fluids which caused considerable metasomatism in the Hazeldene area, may have each contributed to the thermal budget. However, the metamorphic thermal gradient may be 80°C km-1 or higher, strongly suggesting a local magmatic control. As none are known in the area, such syn-metamorphic plutons would have to lie beneath the exposed high-grade rocks. 相似文献
Microstructural studies of rocks near the sillimanite isograd demonstrate that cordierite grew early during the development of a steep foliation (S2), was replaced by biotite, andalusite and sillimanite at the metamorphic peak late in S2, and in turn by kyanite + chlorite adjacent to localized small post-D2 shear zones. Although the anticlockwise P–T–t path is well defined, the precise P–T conditions are uncertain because of problems with experimental and thermodynamic data. The best estimate for the metamorphic peak for rocks close to the sillimanite isograd is around 600° C at 4 kbar.
The metamorphism has been dated at 1544 Ma, and was synchronous with a major crustal shortening event. Because proposed extensional events occurred more than 60 Ma earlier, their contribution to the peak metamorphic thermal perturbation would have been insignificant. The syn-metamorphic Mica Creek Pegmatites, the abundance of high heat-producing elements in the nearby pre-D2 Sybella Granite, and advective heat by fluids which caused considerable metasomatism in the Hazeldene area, may have each contributed to the thermal budget. However, the metamorphic thermal gradient may be 80°C km
18.
The structure of sodium tetrasilicate (Na2Si4O9) glass and melt was studied in the range from 300 to 950?K by neutron diffraction. Increasing temperature leads to gradual decrease of the peak intensities in the static structure factors possibly with a change in the slope at the glass transition temperature (T g?773?K), but no shift and broadening of the peaks is observed. Especially, the position of the first sharp diffraction peak (FSDP) at 1.6?Å–1 remains constant in the whole temperature range studied. The corresponding pair correlation functions g(r) are very similar at all temperatures. Only a slight broadening of the Si-O and O-O first nearest-neighbour peaks with temperature is observed, which can be attributed to temperature enhanced dynamic distortions of the SiO4 tetrahedra. All these results suggest that there is little change not only in the short- but also in the medium-range order of the sodium tetrasilicate glass and melt around the glass-liquid transition. 相似文献
19.
We collected materials on geological indicators of paleostresses at the western pericline of the Greater Caucasus mega-anticlinorium and within the large transverse flexure-fault zone (Anapa and Dzhiginka zones) limiting this mega-anticlinorium. Based on the data, we reconstructed local stress states in different tectonic zones. The reconstructed local stresses showed a considerable variation of the orientations axes of principal stress near the two zones. In a site adjacent to the flexure-fault zone and located near the western pericline of the Greater Caucasus mega-anticlinorium, the detachment systems of northeastern (NE–SW) strike are determined. Additionally, field structural studies proved elongation in the northwestern (NW–SE) direction. This was also verified by the reconstruction of orientations of minimum compression stress axes (maximum deviatory tension) implemented by cataclastic analysis of structural–kinematic information on the movements of the fault planes (tectonic cracks and minor ruptures). We found a well-expressed multistage regime of the northwestern (NW–SE) tension within the limits of the Semisam anticline. Tension deformations (along the axis of the main folded structure) are manifested in structures of different scales; the values of relative elongation are defined for some of them. At the western pericline of the Greater Caucasus mega-anticlinorium, in the Miocene deposits, a north–south (NNW) compression regime with steep inclinations of axes of maximum compression stresses was identified. In the boundary zone between the Northwestern Caucasus and transverse Kerch–Taman trough, an alteration of the orientations of main axes of normal stresses was found. These changes led to the replacement of horizontal-compression and horizontalshear (with a NE-oriented compression) settings, which are predominant in the Caucasus, with settings of horizontal tension (with steep NNW-oriented compression axes). 相似文献
20.
G.N. PHILLIPS 《Journal of Metamorphic Geology》1987,5(3):307-322
Abstract Pelitic assemblages from all major Witwatersrand gold fields record metamorphic conditions of the greenschist facies, with minimal regional grade changes over at least 200 km strike length. Diagnostic metamorphic assemblages are less common in the volumetrically dominant quartzites, the actively-exploited auriferous conglomerates and some of the regionally persistent metapelitic horizons. Bulk rock composition has been a major control on assemblage development.
Key metapelitic assemblages include pyrophyllite, chloritoid, chlorite and muscovite in each gold field, with less common metamorphic biotite. Accessory minerals are pyrite, tourmaline, rutile and zircon. The abundance of chloritoid and pyrophyllite in thin shaly units, together with their minor, but widespread, distribution in quartzites and conglomerates, indicate that metamorphic temperatures reached 350°C ± 50°C in all the gold fields. Pressures are less-well constrained, 1–2 kbar being inferred. Outside the gold fields, higher grades are indicated by andalusite and kyanite near granitoid domes and later intrusions.
The temperatures during peak metamorphism and the abundance of pyrite provide ideal conditions to (re)mobilize gold and may explain its secondary textural features. 相似文献
Key metapelitic assemblages include pyrophyllite, chloritoid, chlorite and muscovite in each gold field, with less common metamorphic biotite. Accessory minerals are pyrite, tourmaline, rutile and zircon. The abundance of chloritoid and pyrophyllite in thin shaly units, together with their minor, but widespread, distribution in quartzites and conglomerates, indicate that metamorphic temperatures reached 350°C ± 50°C in all the gold fields. Pressures are less-well constrained, 1–2 kbar being inferred. Outside the gold fields, higher grades are indicated by andalusite and kyanite near granitoid domes and later intrusions.
The temperatures during peak metamorphism and the abundance of pyrite provide ideal conditions to (re)mobilize gold and may explain its secondary textural features. 相似文献