首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Following a period of heavy precipitation, a large and complex mass movement, namely the ?erefiye landslide, occurred in the Black Sea region of northern Turkey on 23 June 2000. This paper describes the conditioning factors of the landslide and interprets the mass transport processes. Geology, geomorphology and tectonics were considered as the conditioning factors of the failure. Observations showed that the sloping (c.9°) area is not covered by forest trees at the crown where the motion initiated. Analysis of the hydrological response of slopes during the rainstorm indicated that the majority of the failures were caused by the development of a perched water table in the thin surface layer of clay origin, due to infiltration during heavy rain. The distance from the crown down to the toe of the landslide was measured at more than 50?m. The landslide has block sliding characteristics in the upper portions and a debris flow/soil flow component around the margins of the sliding blocks in the middle parts and at the toe. The movement was initiated near the crown as a result of the excess water content between the main formation and the clay at the end of three days of heavy rainfall. The early perturbations lasted for five to six hours, after which the central part of the zone started to move as a soil flow, in which very large intact blocks were transported. Even though the movement was very rapid (1.2?m/min), there was no loss of life. However, the movement closed the road link between Sinop and Ayanc?k.  相似文献   

2.
The well preserved and undissected Columbia Mountain landslide, which is undergoing suburban development, was studied to estimate the timing and processes of emplacement. The landslide moved westward from a bedrock interfluve of the northern Swan Range in Montana, USA onto the deglaciated floor of the Flathead Valley. The landslide covers an area of about 2 km2, has a toe-to-crown height of 1100 m, a total length of 3430 m, a thickness of between 3 and 75 m, and an approximate volume of 40 million m3. Deposits and landforms define three portions of the landslide; from the toe to the head they are: (i) clast-rich diamictons made up of gravel-sized angular rock fragments with arcuate transverse ridges at the surface; (ii) silty and sandy deposits resting on diamictons in an internally drained depression behind the ridges; and (iii) diamictons containing angular and subangular pebble-to block-sized clasts (some of which are glacially striated) in an area of lumpy topography between the depression and the head of the landslide. Drilling data suggest the diamictons cover block-to-slab-sized bedrock clasts that resulted from an initial stage of the failure.The landslide moved along a surface that developed at a high angle to the NE-dipping, thinly bedded metasediments of the Proterozoic Belt Supergroup. The exposed slope of the main scarp dips 30–37°W. A hypothetical initial rotational failure of the lower part of a bedrock interfluve may have transported bedrock clasts into the valley. The morphology and deposits at the surface of the landslide indicate deposition by a rock avalanche (sturzstrom) derived from a second stage of failure along the upper part of the scarp.The toe of the Columbia Mountain landslide is convex-west in planview, except where it was deflected around areas now occupied by glacial kettles on the north and south margins. Landsliding, therefore, occurred during deglaciation of the valley while ice still filled the present-day kettles. Available chronostratigraphy suggests that the ˜1-km thick glacier in the region melted before 12,000 14C years BP—within 3000 years of the last glacial maximum. Deglaciation and hillslope failure are likely causally linked. Failure of the faceted interfluve was likely due tensile fracturing of bedrock along a bedding-normal joint set shortly after glacial retreat from the hillslope.Open surficial tension fractures and grabens in the Swan Range are limited to an area above the crown of the landslide. Movement across these features suggests that extensional flow of bedrock (sackung) is occurring in what remains of the ridge that failed in the Columbia Mountain landslide. The fractures and grabens likely were initiated during failure, but their morphologies suggest active extension across some grabens. Continued movement of bedrock above the crown may result in future mass movements from above the previous landslide scarp. Landslides sourced from bedrock above the scarp of the late-glacial Columbia Mountain landslide, which could potentially be triggered by earthquakes, are geologic hazards in the region.  相似文献   

3.
陶波  李锋  马威  刘建雄  易守勇 《热带地理》2022,42(10):1761-1770
采用工程地质钻探、物探、地质测绘及室内试验等技术方法探讨飞鹅山Ⅲ号滑坡形成机理与防治技术。结果表明：1）滑坡体主要岩性为泥质粉砂岩,飞鹅山滑坡属于新形成的深层中型牵引式滑坡,在平面上呈圈椅状。2）滑坡属于双层滑面滑坡,主滑面以中型深层滑坡为主,主滑体上部发育中型中厚层滑坡。3）滑坡产生的原因为：(1)泥质粉砂岩倾向与坡向基本一致,且岩层倾角为中等倾角;(2)人工开挖使坡脚形成高陡临空面,抗滑力大为降低;(3)雨水沿层面及节理裂隙入渗至坡体深部,大大增加岩土体容重,同时泥质粉砂岩遇水软化,抗剪强度显著降低。4）结合该滑坡区地质环境条件,采用坡面削坡+锚杆（索）+格构梁+双排预应力锚拉抗滑桩+三维网植草绿化+截排水+毛石挡墙的综合治理方法进行防治,监测结果显示该滑坡变形及位移已得到有效控制,整治效果良好。  相似文献   

4.
张溪滑坡--台风诱发滑坡成因分析   总被引：6，自引：1，他引：5  
彭社琴  陈明东 《山地学报》2005,23(6):725-728
14号台风“云娜”造成我国东部沿海地区发生多处滑坡地质灾害,张溪滑坡便是其中个案。通过对张溪滑坡成因进行分析,得出了张溪滑坡是在一定厚度覆盖层、特定地形条件、植被条件下,台风风力加载作用及暴雨的淘蚀、软化、增重等一系列过程共同作用下滑动失稳的滑坡。它与暴雨型滑坡的形成机理有显著不同,这一分析成果对类似滑坡的研究和防治具有一定的意义。  相似文献   

5.
The Jiufengershan rock and soil avalanche is one of the largest landslides triggered by the Chi-Chi earthquake Taiwan 1999. The landslide destabilized the western limb of the Taanshan syncline along a weak stratigraphic layer. It involved a flatiron remnant, which was almost entirely mobilized during the earthquake. The avalanche was slowed down by NS trending ridges located downstream along the Jiutsaihu creek. The landslide affected a 60 m thick and 1.5 km long sedimentary pile composed of shales and sandstones, which dip 22°SE toward a transverse valley. The triggering mechanism and the sliding process were analyzed by means of geological and morphological data from aerial photographs and observed in the field. A high-resolution airborne Light Detection and Ranging (LiDAR) image taken 2.5 years after the landslide allows the identification of morphological structures along the sliding surface and the landslide accumulation. The sliding surface shows several deformation structures such as fault scarps and folds. These structures are interpreted in terms of basal shear stresses created during the avalanche. Three major joint sets were identified at the sliding surface. The isopach map of the landslide was calculated from the comparison between elevation models before and after the earthquake. The coseismic volume of mobilized material and landslide deposit data are 42 × 106 m3 and 50 × 106 m3, respectively. The geometry of the landslide accumulation in the field has an irregular star shape. The morphology of the deposit area shows a sequence of smooth reliefs and depressions that contrast with the neighboring ridges.  相似文献   

6.
Giant landslides, which usually have volumes up to several tens of km3, tend to be related to mountainous reliefs such as fault scarps or thrust fronts. The western flank of the Precordillera in southern Peru and northern Chile is characterized by the presence of such mega-landslides. A good example is the Latagualla Landslide (19°15′S), composed of ~ 5.4 km3 of Miocene ignimbritic rock blocks located next to the Moquella Flexure, a structure resulting from the propagation of a west-vergent thrust blind fault that borders the Precordillera of the Central Depression. The landslide mass is very well preserved, allowing reconstitution of its movement and evolution in three main stages. The geomorphology of the landslide indicates that it preceded the incision of the present-day valleys during the late Miocene. Given the local geomorphological conditions 8–9 Ma ago (morphology, slopes and probably a high water table), large-magnitude earthquakes could have provided destabilization forces enough to cause the landslide. On the other hand, present seismic forces would not be sufficient to trigger such landslides; therefore the hazard related to them in the region is low.  相似文献   

7.
The Corvara landslide is an active slow moving rotational earth slide - earth flow, located uphill of the village of Corvara in Badia, one of the main tourist centres in the Alta Badia valley in the Dolomites (Province of Bolzano, Italy). Present-day movements of the Corvara landslide cause National Road 244 and other infrastructures to be damaged on a yearly basis. The movements also give rise to more serious risk scenarios for some buildings located in front the toe of the landslide. For these reasons, the landslide has been under observation since 1997 with various field devices that enable slope movements to be monitored for hazard assessment purposes. Differential GPS measurements on a network of 47 benchmarks has shown that horizontal movements at the surface of the landslide have ranged from a few centimetres to more than 1 m between September 2001 and September 2002. Over the same period, vertical movements ranged from a few centimetres to about 10 cm, with the maximum displacement rate being recorded in the track zone and in the uppermost part of the accumulation lobe of the landslide. Borehole systems, such as inclinometers and TDR cables, have recorded similar rates of movement, with the depths of the major active shear surfaces ranging from 48 m to about 10 m. From these data, it is estimated that the active component of the landslide has a volume of about 50 million m3. In this paper the monitoring data collected so far are presented and discussed in detail to prove that the hazard for the Corvara landslide, considered as the product of yearly probability of occurrence and magnitude of the phenomenon, can be regarded has as medium or high if the velocity or alternatively the volume involved is considered. Finally, it is also concluded that the monitoring results obtained provide a sound basis on which to develop and validate numerical models, manage hazard and support the identification of viable passive and active mitigation measures.  相似文献   

8.
高位滑坡的运动转化形式   总被引：1，自引：0，他引：1  
高位滑坡剪出口高于坡脚,它一旦滑离滑坡发生区,运动可能转化成四种形式:1.崩塌:由滑体经分级解体滑过剪出口处依次向前倾倒而成;2.碎屑流动或3.碎屑滑动:由滑动块体经碎屑化而成;4.泥石流:在适当的细粒物质量和水体条件下生成的碎屑流动。  相似文献   

9.
The Tessina landslide is a large, seasonally active slope failure located on the southern slopes of Mt. Teverone, in the Alpago valley of NE Italy, consisting of a complex system that has developed in Tertiary Flysch deposits. The landslide, which first became active in 1960, threatens two villages and is hence subject to detailed monitoring, with high quality data being collected using piezometers, inclinometers, extensometers, and through the use of a highly innovative, automated Electronic Distance Measurement (EDM) system, which surveys the location of a large number of reflector targets once every 6 h. These systems form the basis of a warning system that protects the villages, but they also provide a very valuable insight into the patterns of movement of the landslide.In this paper, analysis is presented of the movement of the landslide, concentrating on the EDM dataset, which provides a remarkable record of surface displacement patterns. It is proposed that four distinct movement patterns can be established, which correspond closely to independently defined morphological assessments of the landslide complex. Any given block of material transitions through the four phases of movement as it progresses down the landslide, with the style of movement being controlled primarily by the groundwater conditions. The analysis is augmented with modelling of the landslide, undertaken using the Itasca FLAC code. The modelling suggests that different landslide patterns are observed for different parts of the landslide, primarily as a result of variations in the groundwater conditions. The model suggests that when a movement event occurs, displacements occur initially at the toe of the landslide, then retrogress upslope.  相似文献   

10.
A geomorphological study focussing on slope instability and landslide susceptibility modelling was performed on a 278 km2 area in the Nalón River Basin (Central Coalfield, NW Spain). The methodology of the study includes: 1) geomorphological mapping at both 1:5000 and 1:25,000 scales based on air-photo interpretation and field work; 2) Digital Terrain Model (DTM) creation and overlay of geomorphological and DTM layers in a Geographical Information System (GIS); and 3) statistical treatment of variables using SPSS and development of a logistic regression model. A total of 603 mass movements including earth flow and debris flow were inventoried and were classified into two groups according to their size. This study focuses on the first group with small mass movements (100 to 101 m in size), which often cause damage to infrastructures and even victims. The detected conditioning factors of these landslides are lithology (soils and colluviums), vegetation (pasture) and topography. DTM analyses show that high instabilities are linked to slopes with NE and SW orientations, curvature values between − 6 and − 0.7, and slope values from 16° to 30°. Bedrock lithology (Carboniferous sandstone and siltstone), presence of Quaternary soils and sediments, vegetation, and the topographical factors were used to develop a landslide susceptibility model using the logistic regression method. Application of “zoom method” allows us to accurately detect small mass movements using a 5-m grid cell data even if geomorphological mapping is done at a 1:25,000 scale.  相似文献   

11.
An extensive ( 25 km2) landslide complex covers a large area on the west side of the Williams Fork Mountains in central Colorado. The complex is deeply weathered and incised, and in most places geomorphic evidence of sliding (breakaways, hummocky topography, transverse ridges, and lobate distal zones) are no longer visible, indicating that the main mass of the slide has long been inactive. However, localized Holocene reactivation of the landslide deposits is common above the timberline (at about 3300 m) and locally at lower elevations. Clasts within the complex, as long as several tens of meters, are entirely of crystalline basement (Proterozoic gneiss and granitic rocks) from the hanging wall of the Laramide (Late Cretaceous to Early Tertiary), west-directed Williams Range thrust, which forms the western structural boundary of the Colorado Front Range. Late Cretaceous shale and sandstone compose most footwall rocks. The crystalline hanging-wall rocks are pervasively fractured or shattered, and alteration to clay minerals is locally well developed. Sackung structures (trenches or small-scale grabens and upslope-facing scarps) are common near the rounded crest of the range, suggesting gravitational spreading of the fractured rocks and oversteepening of the mountain flanks. Late Tertiary and Quaternary incision of the Blue River Valley, just west of the Williams Fork Mountains, contributed to the oversteepening. Major landslide movement is suspected during periods of deglaciation when abundant meltwater increased pore-water pressure in bedrock fractures.A fault-flexure model for the development of the widespread fracturing and weakening of the Proterozoic basement proposes that the surface of the Williams Range thrust contains a concave-downward flexure, the axis of which coincides approximately with the contact in the footwall between Proterozoic basement and mostly Cretaceous rocks. Movement of brittle, hanging-wall rocks through the flexure during Laramide deformation pervasively fractured the hanging-wall rocks.  相似文献   

12.
通过离散元分析拟合了溪口滑坡碎屑流的运动过程和主要特征,认为滑坡解体后是以碎屑流方式完成运移和停积过程。  相似文献   

13.
  相似文献   

14.
Kinematics of a landslide derived from archival photogrammetry and GPS data   总被引：3，自引：0，他引：3  
P. Baldi  N. Cenni  M. Fabris  A. Zanutta   《Geomorphology》2008,102(3-4):435-444
The evolution of the Patigno landslide, a deep-seated gravitational slope deformation in the Northern Apennine range (Italy), was investigated using archival photogrammetry, and GPS observations from a permanent station located inside the landslide. Historical aerial photographs of the area taken in 1975 (scale 1:13,000), 1987 (1:13,000) and 2004 (1:30,000) were co-registered into the same reference frame using an unconventional method based on the detection of homologous points in multi-temporal models. Three DTMs were produced using a Digital Photogrammetric Workstation and compared. The displacement vectors of 293 points in the landslide were determined. The average movement velocity of the GPS station since 2004 (about 3.5 cm yr− 1) agrees with the mean displacement rate obtained from photogrammetry. Furthermore, the estimated velocity varies seasonally between 3 and 6 cm yr− 1. This variability correlated with rainfall suggests that the creep of the landslide is influenced by hydrological factors.  相似文献   

15.
Old landslides are prominent features in the landscape around Hagere Selam, Tigray Highlands, Ethiopia. The available evidence suggests their Late Pleistocene to Middle Holocene age and conditions of soil humidity. The affected geological layers, often silicified lacustrine deposits prone to sliding, rest upon or above the water holding Amba Aradam sandstone aquifer.Three examples of present-day (remobilisation of old) mass movements are illustrated and discussed. The aims of the study were to unravel the environmental conditions of the present-day remobilisation of ancient flows, as well as those of first-time landslides. The first two mass movements discussed are slumps, located in areas with vigorous regeneration of (grassy) vegetation. Their activation is thought to be the consequence of an increase in infiltration capacity of the soils under regenerating vegetation. One of these slumps had a horizontal movement of the order of 10–20 m in 1 day.The other case is the remobilisation of the May Ntebteb debris flow below the Amba Aradam sandstone cliff. The debris flow presently creeps downslope at a rate of 3–6 cm year−1. Palynological evidence from tufa shows that the reactivation of the flow started 70 years ago. Shear resistance measurements indicate the danger for continuous or prefailure creep. From the soil mechanics point of view, the reactivation of the debris flow is due to the combination of two factors: (1) the reduction of flow confining pressures as a result of gully incision over the last hundred years, and (2) the increase of seepage pressure as a consequence of the cumulative effect of this incision and the increase in infiltration rates on the lobe since grazing and woodcutting have been prohibited 8 years ago. The role of such exclosures as possible landslide triggers is discussed.From the geomorphological point of view, the ancient movements and their present-day reactivation cannot be compared: the ancient movements led to the development of debris flows, whereas the reactivations relate to the dissection of these mass movement deposits.  相似文献   

16.
ABSTRACT

We employed integrated methods to assess the landslide movement in Sv. Anton town in the Western Carpathians Neogene Volcanic Field (Central Slovakia). The integrated diagnostics required study of the landslide kinematic activity by a combination of Global Navigation Satellite Systems (GNSS) and Electrical Resistivity Tomography (ERT) imaging from November 2013 to March 2015. A topographic model with 2-cm accuracy was constructed from Unmanned Aerial Vehicles (UAV) photogrammetry. Continuous spatial datasets of movement and displacement field vectors were interpolated from the measured movements over the entire study period. Although deformation studies in Slovakia have a long-term tradition, complex interdisciplinary studies in urbanized areas are still lacking. This inspired our main objectives: to identify landslide kinematics and to reconstruct and define the rates of annual landslide movement obtained from geodetic measurement at the monitoring points. Our results demonstrate how landslide integrated diagnostics contribute to the detection of slope instability, with a maximum velocity of 60.82 mm/yr during the summer period. The precipitation effects are consistent with the Sv. Anton landslide displacement acceleration, and the following increases in total monthly precipitations are staggering compared to long-term monthly averages: July precipitation increased by 175.3%, August by 203.3%, and September by 198.1%.  相似文献   

17.
A sediment record is used, in combination with shallow landslide soil redistribution and sediment-yield modelling, to reconstruct the incidence of high-magnitude/low-frequency landslide events in the upper part of a catchment and the history of a wetland in the lower part. Eleven sediment cores were obtained from a dune-impounded wetland at Te Henga, west Auckland, northern New Zealand. Sediment stratigraphy and chronology were interpreted by radiocarbon dating, foraminiferal analysis, and provisional tephrochronology. Gradual impoundment of the wetland began c. 6000 cal yr BP, coinciding with the start of a gentle sea-level fall, but complete damming and initial sedimentation did not begin until c. 1000 cal yr BP. After damming, four well-defined sediment pulses occurred and these are preserved in the form of distinct clay layers in most of the sediment cores. For interpreting the sediment pulses, a physically based landslide model was used to determine spatially distributed relative landslide hazard, applicable at the catchment scale. An empirical landslide-soil redistribution component was added and proved able to determine the volumes and spatial pattern of eroded and deposited soil material, sediment delivery ratio and the impact on total catchment sediment yield. Sediment volumes were calculated from the wetland cores and corresponding landslide scenarios are defined through back-analysis of modelled sediment yield output. In general, at least four major high-magnitude landslide events, both natural and intensified by forest clearance activities, occurred in the catchment upstream of Te Henga Wetland during the last c. 1000 years. The spatial distribution of modelled critical rainfall values for the catchment can be interpreted as an expression of shallow landslide hazard. The magnitude of the sediment pulses represented in the wetland can be back-calculated to critical rainfall thresholds representing a shallow landslide model scenario.  相似文献   

18.
Chinese historic documents recorded that on June 1, 1786, a strong M=7.75 earthquake occurred in the Kangding-Luding area, Sichuan, southwestern China, resulting in a large landslide that fell into the Dadu River. As a result, a landslide dam blocked the river. Ten days later, the sudden breaching of the dam resulted in catastrophic downstream flooding. Historic records document over 100,000 deaths by the flood. This may be the most disastrous event ever caused by landslide dam failures in the world. Although a lot of work has been carried out to determine the location, magnitude and intensity of the 1786 earthquake, relatively little is known about the occurrence and nature of the landslide dam. In this paper, the dam was reconstructed using historic documents and geomorphic evidence. It was found that the landslide dam was about 70 m high, and it created a lake with a water volume of about 50×106 m3 and an area of about 1.7 km2. The landslide dam breached suddenly due to a major aftershock on June 10, 1786. The peak discharge at the dam breach was estimated using regression equations and a physically based predictive equation. The possibility of a future failure of the landslide seems high, particularly due to inherent seismic risk, and detailed geotechnical investigations are strongly recommended for evaluating the current stability of the landslide.  相似文献   

19.
A devastating landslide on 18 August 1998 near Malpa Village in Kali Valley of Higher Kumaun Himalaya killed 221 persons. The landslide was a complex rock fall–debris flow. The mass movement generated around one million cubic metres of debris and partially blocked the Kali River, Malpa Gad (a tributary of Kali) being blocked completely. The rock mass failed primarily due to the near vertical slopes hanging over the valley along joints, the formation of structural wedges along the free face, the sheared rock mass due to the close proximity of major tectonic planes, and the enhanced pore–water pressure due to prolonged heavy precipitation in the preceding days. The mesoscopic shear zone, exhibiting ramp and flat structure in quartzites, shows a southward thrust movement that might have generated shear stress in the rocks. The slide clearly demonstrates the distressed state of the rock mass in the Himalayan region due to the ongoing northward drift of the Indian plate.  相似文献   

20.
Landslide hazard assessment, effected by means of geostatistical methods, is based on the analysis of the relationships between landslides and the spatial distributions of some instability factors. Frequently such analyses are based on landslide inventories in which each record represents the entire unstable area and is managed as a single instability landform. In this research, landslide susceptibility is evaluated through the study of a variety of instability landforms: landslides, scarps and areas uphill from crown. The instability factors selected were: bedrock lithology, steepness, topographic wetness index and stream power index. The instability landform densities computed for all the factors, which were arranged in Unique Condition Unit, allowed us to derive a total of three prediction images for each landslide typology. The role of the instability factors and the effects generated by the use of different landforms were analyzed by means of: a) bivariate analysis of the relationships between factors and landslide density; b) predictive power validations of the prediction images, based on a random partition strategy.The test area was the Iato River Basin (North-Western Sicily), whose slopes are moderately involved in flow and rotational slide landslides (219 and 28, respectively). The area is mainly made up of the following complexes: Numidian Flysch clays (19%, 1%), Terravecchia sandy clays (5%, 1%), Terravecchia clayey sands (3%, 0.3%) and San Cipirello marly clays (9%, 0%). The steepness parameter shows the highest landslide density in the [11–19°] class for both the typologies (8%, 1%), even if the density distributions for rotational slides are right-asymmetric and right-shifted. We obtained significant differences in shape when we used different instability landforms. Unlike scarps and areas uphill from crowns, landslide areas produce left-asymmetric and left-shifted density distributions for both the typologies. As far as the topographic wetness index is concerned, much more pronounced differences were detected among the instability landforms of rotational slides. In contrast, the flow landslides produce normal-like density distributions. The latter and the rotational slide landslide areas produce the highest density values in the class [5.5–6.7], despite an abrupt decreasing trend starting from the first class [3.2–4.4], which is generated by the density values of the rotational slide scarps and areas uphill from crowns. The stream power index at the foot of the slopes, which was automatically derived using a GIS-procedure, shows a positive correlation with the landslide densities marked by the maximum classes: [4.8–6.0] for flows, and [6.0–7.2] for rotational slides. The validation procedure results confirmed that the choice of instability landform influences the results of the susceptibility analysis. Furthermore, the validation procedure indicates that: a) the predictive models are generally satisfactory; b) scarps and zones uphill from crown areas are the most diagnostically unstable landforms, for flow and rotational slide landslides respectively.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号