共查询到20条相似文献，搜索用时 93 毫秒
1.
传统上认为前陆冲断带内部的背斜构造具有"成排成带分段"的特征,在表观认识和宏观尺度上讲,容易理解这一特征,并且通过"成排成带分段"的解剖,直接为含油气区带评价和地震解释方案的落实提供指导作用。随着前陆冲断带深层结构的精细解剖和三维空间内构造变形的准确刻画,发现前陆冲断带深层构造变形的分布并非成排成带分段的特征,褶皱构造的发育与分布明显受前陆冲断构造位移量及各个断层位移量的大小所控制,各个断层控制的逆冲岩席在垂向上相互叠置、侧向上交叉对接、走向上错落有致, 3D立体空间内由多个次级弧形体组成鳞片状分布。本文以中国天然气勘探最为成功、勘探资料最为详实的库车坳陷克拉苏构造带为例,通过地震剖面精细构造解释,揭示出构造变形的运动学特征及其构造位移量在传播过程中的分异和转换,进而控制冲断带内部构造岩席的生长发育和空间展布特征,并在3D立体空间内揭示冲断岩席受构造位移量的控制而成鳞片状分布的规律,控制这一分布规律的主控因素是冲断构造位移量与冲断岩席长度之间定量的几何关系。这一认识提升了油气藏评价和构造圈闭描述的精度。 相似文献
2.
Evidence is presented for the existence of three fundamental mechanisms by which thrust sheets move. The mechanisms are: (1) failure of a stiff layer, to form ramp-flat geometry (‘imbricated’ thrust sheets); (2) detachment of a layer by folding (‘décollement” thrust sheets); (3) differential layer-parallel shortening (‘LPS’ thrust sheets). The mechanisms are independent but may operate interactively to form families of ‘hybrid” thrust sheets. Since LPS thrust sheets have not been previously described or documented, data from the New York plateau, deformed almost exclusively by differential LPS, is presented to demonstrate the physical characteristics of this thrust mechanism.Information from the plateau indicates that finite-strain behavior closely reflects the geometric boundary conditions and is independent of temperature and depth of burial. Finite-strain data are used to construct a set of iso-strain maps in both the deformed and undeformed states. The iso-strain maps are in turn used to determine the displacement field for the thrust sheet. The displacement field allows visualization of the effects of both Lagrangian and Eulerian transformations on an initially orthogonal grid.Utilizing sections from a number of overthrust belts, it is shown that the three mechanisms occur universally although in various proportions. LPS is regionally developed throughout the central and northern Appalachians. The presence of the LPS thrust sheets probably accounts for the failure of structural cross-sections to bed-length balance in these blind thrust terranes. Finally a series of examples drawn from the field as well as the literature are used to illustrate both the characteristics of hybrid thrust sheet families as well as to indicate how knowledge of their behavior can be utilized in developing strategies for the construction and balancing of structural cross-sections. 相似文献
3.
M. Parish 《Journal of Structural Geology》1984,6(3):247-255
The Gavarnie nappe is a feature of the Tertiary Pyrenean orogen and is shown to consist of at least two thrust sheets of Palaeozoic rocks which are overlain by a southward-dipping sequence of Cretaceous and Eocene sediments, showing folded thrust structures. The Gavarnie nappe covers a basement and Mesozoic cover-rock sequence which is exposed in the tectonic windows of La Larri and the Troumouse Cirque. Here, previously unrecognized thrusts involving basement were responsible for folding the overlying Gavarnie nappe. These basement-involved thrusts climb up section westwards giving a westward lowering of the Gavarnie thrust along strike. The structural evolution of the Gavarnie nappe in a region extending from Heas in France to the Valle de Pineta in Spain can be explained in terms of a piggy-back thrusting sequence. On a regional scale, thrust-tectonic models may be used to explain the double vergence of the Pyrenean chain where early southward-directed thrusting was responsible for structures in the South Pyrenean zone. A later northward-directed back thrusting event, or rotation of southward-directed thrust sheets by the stacking of lower thrust horses, can explain the steepness of structures in the axial zone and the northward-verging North Pyrenean thrust zone. Both models suggest that prior to the Pyrenean orogeny, some of the Hercynian structures in the axial zone were flatter lying, and have been rotated to their present steepness during the Pyrenean orogeny. 相似文献
4.
The pre-orogenic morphology of the west Sicilian Mesozoic continental margin was characterised by platforms and basins elongated more or less parallel to the ancient junction between ocean and continent. The deformation of this continental margin during the Miocene gave rise to a number of thrust sheets which were transported southwards where they rest against the stable Iblean plateau. Eight thrust sheets have been sampled for palaeomagnetism in order to establish the amount of rotation, relative to Iblei, which occurred during emplacement. Clockwise rotations of large magnitude appear to have taken place, and these rotations are considered to be related to the emplacement of the Calabrian—Peloritani structure onto this continental margin. 相似文献
5.
The Gran Sasso chain in Central Italy is made up of an imbricate stack of eight thrust sheets, which were emplaced over the Upper Miocene—Lower Pliocene Laga Flysch. The thrust sheets are numbered from 1 to 8 in order of their decreasing elevation in the tectonic stack, and their basal thrusts are numbered from T1 to T8, accordingly. On the basis of their different deformation features, the major thrust faults fall into three groups: (1) thrust faults marked by thick belts of incoherent gouges and breccia zones (T1, T2, T3); (2) thrust faults characterized by a sharp plane which truncates folds that had developed in the footwall rocks (T5, T6); and (3) thrust faults truncating folds developed in both the hangingwall and footwall units, and bordered by foliated fault rocks (T7). The deformation features observed for the different faults seem to vary because of two combined factors: (1) lithologic changes in the footwall and hangingwall units separated by the thrust faults; and (2) increasing amounts of deformation in the deepest portions of the imbricate stack. The upper thrust sheets (from 1 to 6) are characterized by massive calcareous and dolomitic rocks, they maintain a homoclinal setting and are truncated up-section by the cataclastic thrust faults. The lowermost thrust sheets (7 and 8) are characterized by a multilayer with competence contrasts, which undergoes shear-induced folding prior to the final emplacement of the thrust sheets. Bedding and axial planes of folds rotate progressively towards the T5, T6, T7 and T8 thrust boundaries, and are subsequently truncated by propagation of the brittle thrust faults. The maximum deformation is observed along the T7 thrust fault, consistent with horizontal displacement that increases progressively from the uppermost to the lowermost thrust sheet in the tectonic stack. The axial planes of the folds developed in the hangingwall and footwall units are parallel to the T7 thrust fault, and foliated fault rocks have developed. Field data and petrographic analysis indicate that cleavage fabrics in the fault rocks form by a combination of cataclasis, cataclastic flow and pressure-solution slip, associated with pervasive shearing along subtly distributed slip zones parallel to the T7 thrust fault. The development of such fabrics at upper crustal levels creates easy-slip conditions in progressively thinner domains, which are regions of localized flow during the thrust sheet emplacement. 相似文献
6.
Early Cenozoic Mega Thrusting in the Qiangtang Block of the Northern Tibetan Plateau 总被引：2，自引：0，他引：2
WU Zhenhan YE Peisheng Patrick J. BAROSH HU Daogong LU Lu ZHANG Yaoling 《《地质学报》英文版》2012,86(4):799-809
Recent mapping and seismic survey reveal that intensive compression during the Early Cenozoic in the Qiangtang block of the central Tibetan Plateau formed an extensive complex of thrust sheets that moved relatively southward along several generally north-dipping great thrust systems. Those at the borders of the ~450 km wide block show it overrides the Lhasa block to the south and is overridden by the Hohxil-Bayanhar block to the north. The systems are mostly thin-skinned imbricate thrusts with associated folding. The thrust sheets are chiefly floored by Jurassic limestone that apparently slid over Triassic sandstone and shale, which is locally included, and ramped upward and over Paleocene-Eocene red-beds. Some central thrusts scooped deeper and carried up Paleozoic metamorphic rock, Permian carbonate and granite to form a central uplift that divides the Qiangtang block into two parts. These systems and their associated structures are unconformably overlain by little deformed Late Eocene-Oligocene volcanic rock or capped by Miocene lake beds. A thrust system in the northern part of the block, as well as one in the northern part of the adjacent Lhasa block, dip to the south and appear to be due to secondary adjustments within the thrust sheets. The relative southward displacement across this Early Cenozoic mega thrust system is in excess of 150 km in the Qiangtang block, and the average southward slip-rate of the southern Qiangtang thrusts ranged from 5.6 mm to 7.4 mm/a during the Late Eocene-Oligocene. This Early Cenozoic thrusting ended before the Early Miocene and was followed by Late Cenozoic crustal extension and strike-slip faulting within the Qiangtang block. The revelation and understanding of these thrust systems are very important for the evaluation of the petroleum resources of the region. 相似文献
7.
Upper crustal shortening and forward modeling of the Himalayan thrust belt along the Budhi-Gandaki River, central Nepal 总被引：1，自引：1，他引：0
A balanced cross-section along the Budhi-Gandaki River in central Nepal between the Main Central thrust, including displacement on that fault, and the Main Frontal thrust reveals a minimum total shortening of 400 km. Minimum displacement on major orogen-scale structures include 116 km on the Main Central thrust, 110 km on the Ramgarh thrust, 95 km on the Trishuli thrust, and 56 km in the Lesser Himalayan duplex. The balanced cross-section was also incrementally forward modeled assuming a generally forward-breaking sequence of thrusting, where early faults and hanging-wall structures are passively carried from the hinterland toward the foreland. The approximate correspondence of the forward modeled result to observe present day geometries suggest that the section interpretation is viable and admissible. In the balanced cross-section, the Trishuli thrust is the roof thrust for the Lesser Himalayan duplex. The forward model and reconstruction emphasize that the Lesser Himalayan duplex grew by incorporating rock from the footwall and transferring it to the hanging wall along the Main Himalayan thrust. As the duplex developed, the Lesser Himalayan ramp migrated southward. The movement of Lesser Himalayan thrust sheets over the ramp pushed the Lesser Himalayan rock and the overburdens of the Greater and Tibetan Himalayan rock toward the erosional surface. This vertical structural movement caused by footwall collapse and duplexing, in combination with erosion, exhumed the Lesser Himalaya. 相似文献
8.
龙门山北段矿山梁构造解析及其油气勘探 总被引：8，自引：0，他引：8
矿山梁构造是龙门山冲断带北段典型的前锋构造之一,经历了晚三叠世和新生代两期构造挤压变形。矿山梁构造几何学上表现为一个双重构造:浅层是一个晚三叠世形成的断层转折褶皱;深层则是在新生代形成的三个逆冲岩片叠置所构成的隐伏堆垛背斜构造。深部构造的发育改造了上覆晚三叠世形成的浅层构造。矿山梁构造的有利勘探部位是深部的隐伏冲断构造,尤其是新生代构造变形中最早形成的构造岩片即岩片1,但该构造能否具有较好的油气潜力则取决于深部构造顶部滑脱层的封堵能力。分析认为新生代形成的隐伏冲断构造是龙门山冲断带前锋带中油气勘探的新领域。 相似文献
9.
Within fold-thrust belts, the junctions between salients and recesses may hold critical clues to the overall kinematic history of fold-thrust belts. The deformation history within these junctions is best preserved in areas where thrust sheets extend from a salient through an adjacent recess. We examine one such junction within the Sevier fold-thrust belt (western United States) along the Leamington transverse zone, northern Utah. The Canyon Range thrust sheet can be traced continuously from the Leamington transverse zone to its adjacent salient to the south, the Central Utah segment. Deformation within the Canyon Range thrust sheet took place by faulting and cataclastic flow. Analyses of these fault networks preserved throughout the Canyon Range thrust sheet are used to develop a kinematic history of the Leamington transverse zone. Field data is supplemented by analog sandbox experiments. This study suggests that, in detail, deformation within the overlying thrust sheet may not directly reflect the underlying basement structure. Moreover, these junctions may contain several types of accommodating structures that helped to maintain critical-taper and that serve as potential targets for natural resource exploration. 相似文献
10.
M.P Searle 《Journal of Structural Geology》1985,7(2):129-143
Detailed mapping and structural analysis of three large-scale culminations (Sumeini and Asjudi half-windows and Haybi-Hawasina window) in the Oman Mountains shows a considerably more complex history of deformation than a simple foreland (or downward) sequence of thrust development. Early thrusting processes tended to create a regular stacking order of imbricate slices and major thrust sheets, complying with the “rules’ of thrust propagation, assembled progressively downwards and forwards in the direction of translation. ‘Out-of-sequence’ thrusts can also be demonstrated in places by truncation of footwall structures (folds, imbricate slices, etc.), gross strain differences between thrust sheets, downward-facing structures in footwall units and elimination of thrust sheets beneath. Late stage thrusts frequently cut up-section through the previously assembled stack putting previously younger, lower thrust sheets over previously older, higher ones. Many of the culminations in the northern and central Oman Mountains were formed by ramping associated with this late-stage leap-frog rethrusting event. 相似文献
11.
云南省西部沿澜沧江分布的临沧花岗岩,呈SN向延伸,长达500km,但平均宽度只有25km,系逆冲与推覆叠置变形缩短的结果。岩片冲断和推覆的方向普遍为自西向东,临沧花岗岩带向东推覆的距离为30-80km,最大距离120km,冲断叠瓦构造和推覆构造形成的时代主要为中、新生代。糜棱岩的同位素年龄为15.43Ma、25.55Ma和179Ma.新生代沿冲断层发生了近SN向水平走滑运动和沿NE、NW向断层的剪切运动。 相似文献
12.
James F. Tull 《Journal of Structural Geology》1984,6(3):223-234
Late Palaeozoic deformation in the southern Appalachians is believed to be related to the collisional events that formed Pangaea. The Appalachian foreland fold and thrust belt in Alabama is a region of thin-skinned deformed Palaeozoic sedimentary rocks ranging in age from Early Cambrian to Late Carboniferous, bounded to the northwest by relatively undeformed rocks of the Appalachian Plateau and to the southeast by crystalline thrust sheets containing metasedimentary and metaigneous rocks ranging in age from late Precambrian to Early Devonian. A late Palaeozoic kinematic sequence derived for a part of this region indicates complex spatial and temporal relationships between folding, thrusting, and tectonic level of décollement. Earliest recognized (Carboniferous(?) or younger) compressional deformation in the foreland, observable within the southernmost thrust sheets in the foreland, is a set of large-scale, tight to isoclinal upright folds which preceded thrafing, and may represent the initial wave of compression in the foreland. Stage 2 involved emplacement of low-angle far-traveled thrust sheets which cut Lower Carboniferous rocks and cut progressively to lower tectonic levels to the southwest, terminating with arrival onto the foreland rocks of a low-grade crystalline nappe. Stage 3 involved redeformation of the stage 2 nappe pile by large-scale upright folds oriented approximately parallel to the former thrusts and believed to be related to ramping or imbrication from a deeper décollement in the foreland rocks below. Stage 4 involved renewed low-angle thrusting within the Piedmont rocks, emplacement of a high-grade metamorphic thrust sheet, and decapitation of stage 3 folds. Stage 5 is represented by large-scale cross-folding at a high angle to previous thrust boundaries and fold phases, and may be related to ramping or imbrication on deep décollements within the now mostly buried Ouachita orogen thrust belt to the southwest. Superposed upon these folds are stage 6 high-angle thrust faults with Appalachian trends representing the youngest (Late Carboniferous or younger, structures in the kinematic sequence. 相似文献
13.
The Marathon portion of the Ouachita thrust belt consists of a highly deformed allochthonous wedge of Cambrian-Pennsylvanian slope strata (Marathon facies) that was transported to the northwest and emplaced over Pennsylvanian foredeep sediments. The foredeep strata in turn overlie early-middle Paleozoic shelfal sediments which are deformed by late Paleozoic basement-involved reverse faults. The Dugout Creek thrust is the basal thrust of the allochthon. Shortening in this sheet and overlying sheets is 80%. Steep imbricate faults link the Dugout Creek thrust to upper level detachments forming complex duplex zones. Progressive thrusting and shortening within the allochthon folded the upper level detachments and associated thrust sheets. The Caballos Novaculite is the most competent unit within the Marathon facies and controlled development of prominent detachment folds.Deeper imbricate sheets composed of the Late Pennsylvanian foredeep strata, and possibly early-middle Paleozoic shelfal sediments developed concurrently with emplacement of the Marathon allochthon and folded the overlying allochthon. Following termination of thrusting in the earliest Permian, subsidence and deposition shifted northward to the Delaware, Midland and Val Verde foreland basins. 相似文献
14.
云南省西部沿澜沧江分布的临沧花岗岩,呈SN向延伸,长达500km,但平均宽度只有25km,系逆冲与推覆叠置变形缩短的结果。岩片冲断和推覆的方向普遍为自西向东,临沧花岗岩带向东推覆的距离为30-80km,最大距离120km,冲断叠瓦构造和推覆构造形成的时代主要为中、新生代。糜棱岩的同位素年龄为15.43Ma、25.55Ma和179Ma.新生代沿冲断层发生了近SN向水平走滑运动和沿NE、NW向断层的剪切运动。 相似文献
15.
《Journal of Asian Earth Sciences》1999,17(5-6):643-657
Comparison between numerical models and structural data is used for a better understanding of the evolution of the Siwalik thrust belt of western Nepal. The numerical model involves discontinuities within a critical wedge model, a kinematic forward model of serial cross sections, and a linear diffusion algorithm to simulate erosion and sedimentation. In western Nepal, large Piggy-back basins (Duns) are located above thick thrust sheets that involve more than 5500 m of the Neogene Siwalik Group, whereas Piggy-back basin sedimentation is less developed above thinner thrust sheets (4300 m thick). Numerical model results suggest that thrust sheet thickness and extension of wedge-top basins are both related to an increase of the basal décollement dip beneath the duns. The West Dang Transfer zone (WDTZ) is a N–NE trending tectonic lineament that limits the westward extent of the large Piggy-back basins of mid-western Nepal and is linked to a thickening of the Himalayan wedge eastward. The WDTZ also affects the seismotectonics pattern, the geometry of the thrust front, the lateral extent of Lesser Himalayan thrust sheets, and the subsidence of the foreland basin during middle Siwalik sedimentation. Numerical models suggest that the individualisation of the Piggy-back basins at the transition between the middle Siwalik and upper Siwaliks followed the deposition of the middle Siwaliks that induced a geometry of the foreland basin close to the critical taper. As WDTZ induces an E–W thickning of the Himalayan wedge, it could also induce a northward shift of the leading edge of the ductile deformation above the basal detachment in Greater Himalayas of far-western Nepal. Field data locally suggest episodic out-off-sequence thrusting in the frontal thrust belt of western Nepal, whereas numerical results suggests that episodic out-off sequence reactivation could be a general characteristic of the Himalayan wedge evolution often hidden by erosion. 相似文献
16.
AbstractBiostratigraphical data using larger foraminifera and planktonic foraminifera permitted us to establish the correlation between shallow platform sediments rich in larger foraminifera (Montsec and Serres Marginals thrust sheets) and deeper ones containing planktonic foraminifera (Boixols thrust sheet).Consequently, the Santa Fe limestones containing Ovalveolina-Praealveolinaassemblage represent the Cenomanian. Early Turonian ( ‘IT~ archaeocretacea and P. helvetica zones) exist in both, Montsec and Boixols thrust sheets and it is constituted by Pithonella limestones. Late Turonian (M. schneegansi zone) is only present in Boixols thrust sheet (Reguard Fm.), the Montsec thrust sheet having an erosive hiatus.Late Coniacian-Early Santonian (D. Concavata zone) is represented in the Montsec thrust sheet (Cova Limestones) and in the eastern part of the Boixols thrust sheet (St. Corneli Fm.) by two differents facies giving two different microfaunal assemblages; the firts one, characterized by Ophtalmidiidae s.l indicate a restricted lagoonal environment while the second one, characterized by diverses species of complex agglutinated, Fabulariidae, Meandropsinidae and Rotaliidae, represents an open shallow platform. In the Boixols thrust sheet (Anseroles Fm.) dominate the planktonic foraminifera and small benthic.In the late Santonian (D. asyrnetrica zone) the sea reached as far as Serres Marginales thrust sheet where sediments (Tragó de Noguera unit) are terrigenous and deposited in a very shallow platform. In the Montsec thrust sheet (Montsec marls) the larger foraminifera indicate a platform deeper than that of the Serres Marginals thrust sheet. In the Boixols thrust sheet the sediments are deposited in an outer platform (Herbasavina Fm.) or turbiditic basin (Mascarell Mb.).During Campanian times the transgresion reaches the maximum. In the Serres Marginals sediments are deposited in a restricted shallow environment rich in Meandropsinidae (Serres Limestones). In the Montsec thrust sheet they are deposited in a platform with patch reefs and shoals (Terradets limestones) and in the Boixols one in an outer platform, talus and/or basin.During Early Maastrichtian times (C. falsostuarti zone) terrigenous materials arrived in the basin, the rate of sedimentation increased outstripping the subsidence rate and the retreat of the sea to the north. Late Maastrichtian (C. gansseri zone) is only present in the Boixols thrust sheet. 相似文献
17.
R.J. Knipe 《Journal of Structural Geology》1985,7(1):1-10
The inter-relationships between the exact footwall geometry and the rheology of thrust sheets are investigated. Deviations in the thrust fault surface from an ideal plane will induce a local heterogeneous deformation. The resulting deformation processes depend upon the rate of thrust sheet displacement, the geometry of the feature causing heterogeneous flow, the deformation conditions and the lithologies involved. Two classes of features are particularly important in causing heterogeneous deformation in thrust sheets. The first features are small perturbations on bedding planes which may be inherited sedimentary structures or produced during layer-parallel shortening; the second class of features are ramps, where the thrust sheet climbs up the stratigraphic section. Displacement over these features causes repeated, cyclic straining in the hanging-wall during movement. The strain rates associated with deformation at perturbations, ramps of different geometries and different displacement rates are estimated and used to discuss the influence of footwall geometry on the structural evolution of a thrust sheet. Particular attention is given to the range of fault rocks and deformation microstructures preserved after movement over a footwall with a complex geometry. Perturbations are suggested to be important in the localization of ramps, either because they create ‘sticking points’ near the fault tip during propagation or because they induce eventual failure in the hanging-wall after the movement over a number of these features raises the accumulated damage to a critical level. Analysis of the influence of the exact geometry of ramps on deformation processes during displacement leads to two important conclusions. Firstly, the exact geometry of ramps (i.e. the maximum dip angle and the straining distance from a flat to this maximum angle) may be used to estimate a maximum displacement rate of the thrust sheet. Secondly, the listric geometry of ramps may be an equilibrium shape adjusted to the displacement rate and the rheology of the hanging-wall. Adjustments towards the final geometry may involve the generation of shortcuts on either hanging- or footwall which reduce the imposed deformation rate in the hanging-wall during displacement. 相似文献
18.
In northwest Spain thrust sheets occur in an arcuate fold belt. The fault style consists of an array of thrusts, merging downdip into a single décollement surface. Most of the thrust sheets were initiated as thrusts cutting across flat lying beds. Folds above the hanging-wall ramps and some minor structures indicate that the body of the nappes has been subjected to an inhomogeneous simple shear parallel to bedding (y = 1.15), with slip concentrated along bedding planes. This allows the rocks forming the nappe to remain unstrained. At the base of the nappes a thin zone of deformed rock exists. The thrust sheets die out laterally against an anticline-syncline couple, oblique to the thrust direction. A geometrical analysis shows that if anticline and syncline axes are oblique, the thrust sheet was emplaced with a rotational movement, which can be evaluated. As deformation progressed two sets of folds were formed: a circumferential set, following the arc, and a radial set. An arcuate trace of the thrust structures remains after unfolding the radial folds. With a rotational emplacement, the displacement vector for successive points has a progressively greater length, and forms a progressively lower angle with the thrust. The main thrust units are broken into several slices with rotational movements, so that each unit was curved as it was being emplaced, producing a first tightening of the arc. Later folding increased the arc curvature to its present shape. The palaeomagnetic data available support the above conclusions. 相似文献
19.