首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 62 毫秒
1.
The Variscan Belt in western Europe shows an arcuate geometry that is usually named Ibero-Armorican Arc. The nucleus of this arc, known as the Asturian Arc, comprises the Cantabrian Zone which is a foreland fold and thrust belt. The Trubia River area is located in the inflexion zone of the Asturian Arc, which is a strategic structural position for unraveling the geometry and kinematics of the Variscan thrust sheets and related folds. Geological mapping, construction of stratigraphic and structural cross sections, analysis of kinematic indicators, and estimate of shortening for each cross section have been carried out. This area consists of two major antiform-synform pairs related to two imbricate thrust systems. These folds are asymmetric, tight, and their axial traces follow the trend of the Asturian Arc. They have been interpreted as fault-propagation folds. The emplacement directions measured in the Trubia River area change from north to south and converge towards the core of the Asturian Arc. The minimum shortening estimated ranges between 16.4 and 17.6 km, which corresponds to 56.9 and 59.4%. The complex cross-cutting relationships between folds and thrusts suggest that, in general, the different structural units followed a forward-breaking sequence of emplacement, with some breaching and a few out-of-sequence thrusts. The analysis of the transport vectors together with the disposition of the fold axes and post-thrusting faults that deform the thrust stack are evidence of a late deformation event that is partially or totally responsible for the arcuate form of the Asturian Arc. The timing of the Asturian Arc, amount of shortening, and sequence of emplacement of the structures are in accordance with previous regional studies of the Cantabrian Zone.  相似文献   

2.
Detailed mapping and structural analysis of three large-scale culminations (Sumeini and Asjudi half-windows and Haybi-Hawasina window) in the Oman Mountains shows a considerably more complex history of deformation than a simple foreland (or downward) sequence of thrust development. Early thrusting processes tended to create a regular stacking order of imbricate slices and major thrust sheets, complying with the “rules’ of thrust propagation, assembled progressively downwards and forwards in the direction of translation. ‘Out-of-sequence’ thrusts can also be demonstrated in places by truncation of footwall structures (folds, imbricate slices, etc.), gross strain differences between thrust sheets, downward-facing structures in footwall units and elimination of thrust sheets beneath. Late stage thrusts frequently cut up-section through the previously assembled stack putting previously younger, lower thrust sheets over previously older, higher ones. Many of the culminations in the northern and central Oman Mountains were formed by ramping associated with this late-stage leap-frog rethrusting event.  相似文献   

3.
The Montsec unit is one of the most important detached South-verging nappes within the South Pyrenean Central Unit (SPCU, Southern Pyrenees). A N–S cross-section of its Western sector, based on seismic reflection profiles, shows a hangingwall ramp geometry in Mesozoic strata, overlain by a syntectonic series of Lower Eocene sediments with growth geometry. The geometry of growth strata constrains the age of its movement between the Paleocene and the Middle Eocene. The geometry of the Western, oblique ramp of the South Pyrenean Central Unit is defined by a series of N–S folds, in some cases associated with underlying West-verging thrusts, as indicated by seismic reflection profiles and field data. In this paper, we propose that the geometry of the thrust wedge of Mesozoic units, progressively thinning from East to West, strongly contributed to constrain the location and geometry of the Western termination of the Montsec thrust. The hypothesis proposed is checked by a series of experimental wedges developed in a sandpack with lateral and three-dimensional thickness variations. Oblique structures form as thrusting progresses at the tip of the sand wedge.  相似文献   

4.
The conspicuous curved structures located at the eastern front of the Eastern Cordillera between 25° and 26° south latitude is coincident with the salient recognized as the El Crestón arc. Major oblique strike-slip faults associated with these strongly curved structures were interpreted as lateral ramps of an eastward displaced thrust sheet. The displacement along these oblique lateral ramps generated the local N–S stress components responsible for the complex hanging wall deformation. Accompanying each lateral ramp, there are two belts of strong oblique fault and folding: the upper Juramento River valley area and El Brete area.On both margins of the Juramento River upper valley, there is extensive map-scale evidence of complex deformation above an oblique ramp. The N–S striking folds originated during Pliocene Andean orogeny were subsequently or simultaneously folded by E–W oriented folds. The lateral ramps delimiting the thrust sheet coincident with the El Crestón arc salient are strike-slip faults emplaced in the abrupt transitions between thick strata forming the salient and thin strata outside of it. El Crestón arc is a salient related to the pre-deformational Cretaceous rift geometry, which developed over a portion of this basin (Metán depocenter) that was initially thicker. The displacement along the northern lateral ramp is sinistral, whereas it is dextral in the southern ramp. The southern end of the Eastern Cordillera of Argentina shows a particular structure reflecting a pronounced along strike variations related to the pre-deformational sedimentary thickness of the Cretaceous basin.  相似文献   

5.
We have used analogue experiments to investigate the effects of surface topography on the curvature of fold-and-thrust belts, under conditions of (1) initial relief, but no erosion, and (2) no initial relief, but differential erosion, sedimentation and transport.In experiments where a 2-layer model lithosphere shortened and thickened in front of an advancing straight piston, the geometry of the developing thrust wedge was very sensitive to variations in surface topography. In models with an initially flat, horizontal surface, and in the absence of erosion and sedimentation, thrusts were straight, propagated forwards, and nucleated at buckle folds far in front of an advancing piston. Around an initial topographic high (plateau or cone), thrusts tended to be arcuate, forming salients towards the foreland. Initial plateaux and cones tended to behave rigidly, while arcuate thrust slices formed around them. To accommodate differential slip, transfer zones developed on both sides of initial highs. Fault blocks rotated about vertical axes and thrusts moved in oblique slip within transfer zones. In models with initially horizontal surfaces, which were subject to differential erosion, sedimentation and transport, thrusts initially were straight, but then progressively rotated around non-eroded, thickened and stronger areas. These worked as indenters, in front of which new thrusts nucleated at curved buckle folds. These thrusts were also curved, their apices being in front of the thickened, non-eroded areas.In nature, arcuate structural patterns are to be found around the Altiplano of the Central Andes and around the Tromen volcanic ridge in the Neuquén Basin of northern Patagonia. We infer that these areas behaved in quasi-rigid fashion, protected as they were by their high elevations, and that differential erosion at the scale of the entire Andes may have contributed to oroclinal bending.  相似文献   

6.
Active deformation in the South Caspian region demonstrates the enormous variation in kinematics and structural style generated where a rigid basement block lies within a collision zone. Rigid basement to the South Caspian Basin moves with a westward component relative both to stable Eurasia and Iran, and is beginning to subduct at its northern and western margins. This motion is oblique to the approximately north–south Arabia–Eurasia convergence, and causes oblique shortening to the south and northeast of the South Caspian Basin: thrusting in the Alborz and Kopet Dagh is accompanied by range-parallel strike–slip faults, which are respectively left- and right-lateral. There are also arcuate fold and thrust belts in the region, for two principal reasons. Firstly, weaker regions deform and wrap around the rigid block. This occurs at the curved transition zone between the Alborz and Talysh ranges, where thrust traces are concave towards the foreland. Secondly, a curved fold and thrust belt can link a deformation zone created by movement of the basement block to one created by the regional convergence: west-to-east thrusts in the eastern Talysh represent underthrusting of the South Caspian basement, but pass via an arcuate fan of fold trains into SSW-directed thrusts in the eastern Greater Caucasus, which accommodates part of the Arabia–Eurasia convergence. Each part of the South Caspian region contains one or more detachment levels, which vary dependent on the pre-Pliocene geology. Buckle folds in the South Caspian Basin are detached from older rocks on thick mid-Tertiary mudrocks, whereas thrust sheets in the eastern Greater Caucasus detach on Mesozoic horizons. In the future, the South Caspian basement may be largely eliminated by subduction, leading to a situation similar to Archaean greenstone belts of interthrust mafic and sedimentary slices surrounded by the roots of mountain ranges constructed from continental crust.  相似文献   

7.
塔里木盆地库车前陆褶皱带中段盐相关构造特征与油气聚集   总被引：24，自引：2，他引：24  
塔里木盆地北部库车前陆褶皱带古新统一始新统发育盐岩层系，将库车前陆褶皱带构造变形和圈闭样式分为三层，即盐上构造、盐层(盐间)构造和盐下构造。盐上构造包括盐上背斜、盐上逆冲断层及断层相关褶皱、盐上背冲断块构造、强制褶皱、盐上逆冲断层遮挡构造和盐推覆构造等；盐层(盐间)构造主要包括盐枕构造、盐间断褶构造、盐焊接构造和外来盐席等；盐下构造主要有背冲断块构造、断层相关褶皱、叠瓦冲断带和双重构造等。库车前陆褶皱带盐构造的形成可能受挤压作用、重力滑动和重力扩展作用多重控制。笔者等讨论了盐相关构造油气成藏条件和模式，认为库车前陆褶皱带盐岩层变形与丰富的圈闭构造形成密切相关，烃源岩主要位于盐下，盐岩层作为优质盖层构成石油和天然气藏最优越的遮挡条件，断裂对盐下、盐间和盐上油气成藏都起重要控制作用，但盐下是最有利的油气聚集场所。  相似文献   

8.
The terminology of structures in thrust belts   总被引：1，自引：0，他引：1  
A review of structures and geometric relationships recognized in thrust belts is presented. A thrust is defined as any contractional fault, a corollary being that thrusts must cut up-section in their transport direction. ‘Flats’ are those portions of a thrust surface which were parallel to an arbitrary datum surface at the time of displacement and ‘ramps’ are those portions of thrusts which cut across datum surfaces. Ramps are classified on the basis of their orientation relative to the thrust transport direction and whether they are cut offs in the hangingwall or footwall of the thrust. Lateral variations in the form of staircase trajectories are joined by oblique or lateral ramps which have a component of strike-slip movement.An array of thrusts which diverge in their transport direction may form by either of two propagation models. These are termed ‘piggy-back’ propagation, which is foreland-directed, and ‘overstep’ propagation which is opposed to the thrust transport direction. An array of thrust surfaces is termed an ‘imbricate stack’ and should these surfaces anastamose upwards a ‘duplex’ will result; the fault-bounded blocks are termed ‘horses’. A duplex is bounded by a higher, ‘roof’ thrust and a lower, ‘floor’ thrust. The intersection of any two thrust planes is termed a ‘branch line’.Thrusts can be classified on the basis of their relationship to asymmetric fold limbs which they cut. A further classification arises from whether a particular thrust lies in the hangingwall or footwall of another one.The movement of thrust sheets over corrugated surfaces, or the local development of thrust structures beneath, will fold higher thrust sheets. These folds are termed ‘culminations’ and their limbs are termed ‘culmination walls’. Accommodation of this folding may require movement on surfaces within the hangingwall of the active thrust. These accommodation surfaces are termed ‘hangingwall detachments’ and they need not root down into the active thrust. This category of detachment includes dip-slip ‘hangingwall drop faults’ which are developed by differential uplift of duplex roofs, and ‘out-of-the-syncline’ thrusts which develop from overtightened fold hinges. Back thrusts, as well as forming as hangingwall detachments, may also form due to layer-parallel shortening above a sticking thrust or by rotation of the hangingwall above a ramp.  相似文献   

9.
The Gran Sasso chain in Central Italy is made up of an imbricate stack of eight thrust sheets, which were emplaced over the Upper Miocene—Lower Pliocene Laga Flysch. The thrust sheets are numbered from 1 to 8 in order of their decreasing elevation in the tectonic stack, and their basal thrusts are numbered from T1 to T8, accordingly. On the basis of their different deformation features, the major thrust faults fall into three groups: (1) thrust faults marked by thick belts of incoherent gouges and breccia zones (T1, T2, T3); (2) thrust faults characterized by a sharp plane which truncates folds that had developed in the footwall rocks (T5, T6); and (3) thrust faults truncating folds developed in both the hangingwall and footwall units, and bordered by foliated fault rocks (T7). The deformation features observed for the different faults seem to vary because of two combined factors: (1) lithologic changes in the footwall and hangingwall units separated by the thrust faults; and (2) increasing amounts of deformation in the deepest portions of the imbricate stack. The upper thrust sheets (from 1 to 6) are characterized by massive calcareous and dolomitic rocks, they maintain a homoclinal setting and are truncated up-section by the cataclastic thrust faults. The lowermost thrust sheets (7 and 8) are characterized by a multilayer with competence contrasts, which undergoes shear-induced folding prior to the final emplacement of the thrust sheets. Bedding and axial planes of folds rotate progressively towards the T5, T6, T7 and T8 thrust boundaries, and are subsequently truncated by propagation of the brittle thrust faults. The maximum deformation is observed along the T7 thrust fault, consistent with horizontal displacement that increases progressively from the uppermost to the lowermost thrust sheet in the tectonic stack. The axial planes of the folds developed in the hangingwall and footwall units are parallel to the T7 thrust fault, and foliated fault rocks have developed. Field data and petrographic analysis indicate that cleavage fabrics in the fault rocks form by a combination of cataclasis, cataclastic flow and pressure-solution slip, associated with pervasive shearing along subtly distributed slip zones parallel to the T7 thrust fault. The development of such fabrics at upper crustal levels creates easy-slip conditions in progressively thinner domains, which are regions of localized flow during the thrust sheet emplacement.  相似文献   

10.
In the Variscan foreland of SW-Sardinia (Western Mediterranean sea), close to the leading edge of the nappe zone, nappe emplacement caused folding and repetition of stratigraphic successions, km-scale offset of stratigraphic boundaries and an extensive brittle-ductile shear zone. Thrusts assumed a significant role, accommodating a progressive change of shortening direction and forming complicated thrust triangle zones. During thrust emplacement of the nappes, strong penetrative deformation affected rocks beneath the basal thrust of the nappe stack and produced coeval structures with both foreland-directed and hinterland-directed (backthrusting) shear sense. Cross-cutting and overprinting relationships clearly show that the shortening direction changed progressively from N–S to E–W, producing in sequence: (1) E–W trending open folds contemporaneous with early nappe emplacement in the nearby nappe zone; (2) recumbent, quasi-isoclinal folds with axial plane foliation and widespread, “top-towards-the-SW”, penetrative shearing; (3) N–S trending folds with axial plane foliation, contemporaneous with late nappe emplacement; (4) backthrusts and related asymmetrical folds developed during the final stages of shortening, postdating foreland-verging structures. Structures at (3) and (4) occurred during the same tectonic transport “top-towards-the-E” of the nappe zone over the foreland. The several generations of folds, thrusts, and foliations with different orientations developed, result in a complex finite structural architecture, not completely explicable by the theoretical model proposed up to date.  相似文献   

11.
In a cross-section through the southern arm of the Cantabrian Zone, several duplexes have been identified below the Esla Nappe, which is the uppermost and main thrust sheet of the area. The folds deforming the Esla Nappe are culmination walls linked to frontal and lateral ramps belonging to the lower thrust sheets. The thrust sequence can be established on the basis of quantitative analysis of displacement transfer and out of sequence thrusting. The primitive footwall ramps of the Esla Nappe Region were often subsequently broken by décollements developed in successively lower stratigraphic levels of these footwalls. The kinematics of the lowest duplex are more complicated than those of typical duplexes described elsewhere: some thrusts transfer only part of their displacement to the roof thrust, while the remaining part is accommodated along the higher thrusts of previously emplaced duplexes, cutting out of sequence one or more floor or roof thrusts. Cumulative displacement of the thrusts in this region is about 90 km, giving a present thickness 3 times that of the original pre-orogenic sequence, together with a translation of at least 60 km, for the synorogenic basin.  相似文献   

12.
Late Palaeozoic deformation in the southern Appalachians is believed to be related to the collisional events that formed Pangaea. The Appalachian foreland fold and thrust belt in Alabama is a region of thin-skinned deformed Palaeozoic sedimentary rocks ranging in age from Early Cambrian to Late Carboniferous, bounded to the northwest by relatively undeformed rocks of the Appalachian Plateau and to the southeast by crystalline thrust sheets containing metasedimentary and metaigneous rocks ranging in age from late Precambrian to Early Devonian. A late Palaeozoic kinematic sequence derived for a part of this region indicates complex spatial and temporal relationships between folding, thrusting, and tectonic level of décollement. Earliest recognized (Carboniferous(?) or younger) compressional deformation in the foreland, observable within the southernmost thrust sheets in the foreland, is a set of large-scale, tight to isoclinal upright folds which preceded thrafing, and may represent the initial wave of compression in the foreland. Stage 2 involved emplacement of low-angle far-traveled thrust sheets which cut Lower Carboniferous rocks and cut progressively to lower tectonic levels to the southwest, terminating with arrival onto the foreland rocks of a low-grade crystalline nappe. Stage 3 involved redeformation of the stage 2 nappe pile by large-scale upright folds oriented approximately parallel to the former thrusts and believed to be related to ramping or imbrication from a deeper décollement in the foreland rocks below. Stage 4 involved renewed low-angle thrusting within the Piedmont rocks, emplacement of a high-grade metamorphic thrust sheet, and decapitation of stage 3 folds. Stage 5 is represented by large-scale cross-folding at a high angle to previous thrust boundaries and fold phases, and may be related to ramping or imbrication on deep décollements within the now mostly buried Ouachita orogen thrust belt to the southwest. Superposed upon these folds are stage 6 high-angle thrust faults with Appalachian trends representing the youngest (Late Carboniferous or younger, structures in the kinematic sequence.  相似文献   

13.
The Arro system is an oblique fold system involving the Eocene sediments of the Graus-Tremp basin. It consists of westward-verging folds, trending NNW–SSE, some of them related with thrusts, in piggyback sequence. Seismic profiles allow to infer the geometry of structures at depth: folds and thrusts are ‘decolled’ over an unconformity between turbiditic and platform sediments. Re-activation of bedding surfaces by folding in the underlying units resulted in folding and thrusting in the upper series. To cite this article: A.M. Casas et al., C. R. Geoscience 334 (2002) 765–772.  相似文献   

14.
库车新生代构造性质和变形时间   总被引：126，自引：6，他引：120  
库车构造位于南天山古生代碰撞造山带之南,为塔里木盆地最北的一个构造带。它自北而南可分为边缘逆冲（ 隐伏构造楔） 、斯的克背斜带、北部线性背斜带、拜城盆地、南部背斜带。每个背斜带又包含有若干逆冲断层相关褶皱,它们是断层转折褶皱、断层传播褶皱、滑脱褶皱、断层传播 滑脱混生褶皱、双重逆冲构造、突发构造、三角带构造。底部逆冲断层向南变浅,堆叠逆冲岩席向南变薄,总体上形成一个向南的逆冲构造楔。逆冲断层在斯的克背斜带侵位最早（２５ Ｍａ） ,在北部线性背斜带为１６９ Ｍａ,拜城盆地中的大宛其背斜为３６ Ｍａ,南部背斜带为５３ Ｍａ（ 北部） 和１８ Ｍａ（ 南部） ,变形作用向南变新。库车构造是印 藏板块碰撞的内陆构造响应,是二叠纪前陆盆地复活而成的再生前陆盆地变形带  相似文献   

15.
Abstract

The structure of the Pyrenean pre-Hercynian rocks involved in the “Axial Zone” antiformal stack, results from the association of Hercynian cleavage-related folds and Hercynian and Alpine thrusts. Some of these Alpine and Hercynian thrusts separate thrust sheets in which Upper Paleozoic rocks, Devonian and pre-Hercynian Carboniferous, exhibit different lithostratigraphy and internal structure.

In order to know both, the original Devonian facies distribution and the structural characteristics, the effects of the Alpine and the Hercynian thrusts must be considered. If a conceptual restored cross-section is constructed taking into account both the Alpine and Hercynian thrusts, a different Devonian facies distribution is achieved. Devonian carbonatic successions were originally located in a northernmost position, whereas sequences made by alternations of slates and limestones lie in southernmost areas. Moreover, a N-S variation of the Hercynian structural style appears. In the northern units thrusts are synchronous to folding development and they are the most conspicuous structures. In the intermediate units, thrust postdate cleavage-related folds, and in the southernmost units several folding episodes, previous to the thrusts, are well developed.

We present some examples which enable us to discuss the importance of the Hercynian and Alpine thrusts in the reconstruction of the Pyrenean pre-Alpine geology.  相似文献   

16.
The Wadi El-Shush area in the Central Eastern Desert (CED) of Egypt is occupied by the Sibai core complex and its surrounding Pan-African nappe complex. The sequence of metamorphic and structural events in the Sibai core complex and the enveloping Pan-African nappe can be summarized as follows: (1) high temperature metamorphism associated with partial melting of amphibolites and development of gneissic and migmatitic rocks, (2) between 740 and 660 Ma, oblique island arc accretion resulted in Pan-African nappe emplacement and the intrusion of syn-tectonic gneissic tonalite at about 680 ± 10 Ma. The NNW–SSE shortening associated with oblique island arc accretion produced low angle NNW-directed thrusts and open folds in volcaniclastic metasediments, schists and isolated serpentinite masses (Pan-African nappe) and created NNE-trending recumbent folds in syn-tectonic granites. The NNW–SSE shortening has produced imbricate structures and thrust duplexes in the Pan-African nappe, (3) NE-ward thrusting which deformed the Pan-African nappe into SW-dipping imbricate slices. The ENE–WSW compression event has created NE-directed thrusts, folded the NNW-directed thrusts and produced NW-trending major and minor folds in the Pan-African nappe. Prograde metamorphism (480–525 °C at 2–4.5 kbar) was synchronous with thrusting events, (4) retrograde metamorphism during sinistral shearing along NNW- to NW-striking strike-slip shear zones (660–580 Ma), marking the external boundaries of the Sibai core complex and related to the Najd Fault System. Sinistral shearing has produced steeply dipping mylonitic foliation and open plunging folds in the NNW- and NE-ward thrust planes. Presence of retrograde metamorphism supports the slow exhumation of Sibai core complex under brittle–ductile low temperature conditions. Arc-accretion caused thrusting, imbrication and crustal thickening, whereas gravitational collapse of a compressed and thickened lithosphere initiated the sinistral movement along transcurrent shear zones and low angle normal ductile shear zones and consequently, development and exhumation of Sibai core complex.  相似文献   

17.
论宁镇山脉推覆构造的特征与形成   总被引：1，自引：0，他引：1  
本文通过对宁镇山脉构造特征的分析,认为宁镇山脉是由三个自南而北推掩的构造片体组成的推覆构造。每个构造片体的表层褶皱与逆冲、逆掩断裂组合都是深层滑移的地面表象,反映了统一的构造应力场。推覆构造的主体北东东向延伸,略呈向北突出的弧形,主要形成于三叠纪晚期的印支运动即南象运动。属于扬子、华北两个古板块碰撞带的后缘构造。燕山中—晚期北北东向挤压构造对其产生横跨和叠加。  相似文献   

18.
In Cap Corse, progressive deformation during Late Cretaceous obduction of the ophiolitic Schistes Lustrés (sensu lato) as a pile of imbricate, lens-shaped units during blueschist facies metamorphism was non-coaxial. Two zones are recognized: a lower series emplaced towards the west is overlain by a series emplaced towards the south-southwest in Cap Corse. Equivalent structures (differing only in orientation) occur in both zones. The change in thrust direction was responsible for local refolding and reorientation of previously formed structures, parallel to the new stretching direction immediately below the thrust contact between the two zones, and within localized shear zones in the underlying series.Both zones are refolded about E-overturned F2 folds trending between 350 and 025°. Local minor E-directed thrusts occur associated with the F2 folds. This second deformation of Middle Eocene age is considered to be related to the backthrusting of an overlying klippe containing gneisses of South Alpine origin, and is followed by a third Late Eocene phase of upright 060°-trending F3 folds accompanied by greenschist facies metamorphism.  相似文献   

19.
The Esla tectonic unit lies along the southern boundary of the Cantabrian–Asturian Arc, a highly curved foreland fold-thrust belt that was deformed during the final amalgamation of the Pangea supercontinent. Previous structural and paleomagnetic analyses of the Cantabrian–Asturian Arc suggest a two-stage tectonic history in which an originally linear belt was bent into its present configuration, creating an orocline. The Esla tectonic unit is a particularly complex region due to the interaction of rotating thrust sheets from the southern limb of the arc and the southward-directed thrusts of the Picos de Europa tectonic domain during late-stage north–south shortening and oroclinal bending. These structural interactions resulted in intense modification of early-phase thin-skinned tectonic structures that were previously affected by a deeper out-of-sequence antiformal stack that passively deformed the early thrust stack. A total of 75 paleomagnetic sites were collected from the Portilla and Santa Lucia formations, two carbonate passive-margin reef platform units from the middle Devonian. Similar to other regions of the Cantabrian–Asturian Arc, Esla Unit samples carry a secondary remanent magnetization that was acquired after initial thrusting and folding of Variscan deformation in the late Carboniferous. Protracted deformation during late-stage oroclinal bending caused reactivation of existing thrust sheets that include the Esla and younger Corniero and Valbuena thrusts. When combined with existing structural data and interpretations, these data indicate that the present-day sinuosity of the Esla Unit is the consequence of both secondary rotation of originally linear features in the western Esla exposures (e.g., frontal thrusts), and secondary modification and tightening of originally curvilinear features in the eastern Esla exposures (e.g., hanging-wall lateral/oblique ramps). Differences in structural style between the Esla and other tectonic units of the arc highlight the complex kinematics of oroclinal bending, which at the orogen-scale buckled an originally linear, north–south (in present-day coordinates) trending Cantabrian–Asturian thrust belt during the final stages of Pangea amalgamation.  相似文献   

20.
The Precambrian geology of west-central Madagascar is reviewed and re-interpreted in light of new field observations, Landsat Thematic Mapper image analysis, and U–Pb geochronology. The bedrock of the area consists of: (1) late Archean (to Paleoproterozoic) migmatite gneiss and schist; (2) Mesoproterozoic stratified rocks (Itremo, Amborompotsy, and Malakialina Groups) perhaps deposited unconformably on the older metamorphic rocks (1, above); (3) Proterozoic ( 1000 Ma–720 Ma) plutonic rocks emplaced into both units above (1 and 2), and; (4) latest Neoproterozoic to middle Cambrian ( 570–520 Ma) granitoids emplaced as regionally discordant and weakly foliated plutons throughout the regions.

The effects of Neoproterozoic orogenic processes are widespread throughout the region and our observations and isotopic measurements provide important constraints on the tectonic history of the region: (i) Archean gneisses and Mesoproterozoic stratified rocks are the crystalline basement and platformal sedimentary cover, respectively, of a continental fragment of undetermined tectonic affinity (East or West Gondwanan, or neither). (ii) This continental fragment (both basement and cover) was extensively invaded by subduction-related plutons in the period from  1000 Ma to  720 Ma that were emplaced prior to the onset of regional metamorphism and deformation. (iii) Continental collision related to Gondwana's amalgamation began after  720 Ma and before  570 Ma. Collision related deformation and metamorphism continued throughout the rest of the Neoproterozoic with thermal effects that lasted until  520 Ma. The oldest structures produced during continental collision were km-scale fold- and thrust-nappes with east or southeast-directed vergence (present-day direction). They resulted in the inversion and repetition of Archean and Proterozoic rocks throughout the region. During this early phase of convergence warm rocks were thrust over cool rocks thereby producing the present distribution of regional metamorphic isograds. The vergence of the nappes and the distribution of metamorphic rocks are consistent with their formation within a zone of west or northwest-dipping continental convergence (present-day direction). (iv) Later upright folding of the nappes (and related folds and thrusts) produced km-scale interference fold patterns. The geometry and orientation of these younger upright folds is consistent with E–W horizontal shortening (present-day direction) within a sinistral transpressive regime. We relate this final phase of deformation to motion along the Ranotsara and related shear zones of south Madagascar, and to the initial phases of lower crustal exhumation and extensional tectonics within greater Gondwana.  相似文献   


设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号