共查询到20条相似文献，搜索用时 15 毫秒
1.
Jordi Pujadas Josep Maria Casas Josep Anton Muñoz Francese Sabat 《Geodinamica Acta》2013,26(3):195-206
AbstractThe structure of the southern Pyrenees, east of the Albanyà fault (Empordà area), consists of several Alpine thrust sheets. From bottom upwards three main structural units can be distinguished : the Roc de Frausa, the Biure-Bac Grillera and the Figueres units. The former involves basement and Paleogene cover rocks. This unit is deformed by E-W trending kilometric-scale folds, its north dipping floor thrust represents the sole thrust in this area. The middle unit is formed by an incomplete Mesozoic succession overlain by Garumnian and Eocene sediments. Mesozoic rocks internal structure consists of an imbricate stack. The floor thrust dips to the south and climbs up section southwards. The upper unit exibits the most complete Mesozoic sequence. Its floor thrust is subhorizontal. The lower and middle units thrust in a piggy-back sequence. The upper unit was emplaced out of sequence.Lower Eocene sedimentation in the Biure-Bac Grillera unit was controlled by emergent imbricate thrusts and synchronic extensional faults. One of these faults (La Salut fault) represents the boundary between a platform domain in the footwall and a subsident trough in the hangingwall. Southward thrust propagation produces the inversion of these faults and the development of cleavage-related folds in their hangingwalls (buttressing effect). This inversion is also recorded by syntectonic deposits, which have been grouped in four depositional sequences. The lower sequences represent the filling on the hangingwall trough and the upper sequences the spreading of clastics to the south once the extensional movement ends. 相似文献
2.
M. Parish 《Journal of Structural Geology》1984,6(3):247-255
The Gavarnie nappe is a feature of the Tertiary Pyrenean orogen and is shown to consist of at least two thrust sheets of Palaeozoic rocks which are overlain by a southward-dipping sequence of Cretaceous and Eocene sediments, showing folded thrust structures. The Gavarnie nappe covers a basement and Mesozoic cover-rock sequence which is exposed in the tectonic windows of La Larri and the Troumouse Cirque. Here, previously unrecognized thrusts involving basement were responsible for folding the overlying Gavarnie nappe. These basement-involved thrusts climb up section westwards giving a westward lowering of the Gavarnie thrust along strike. The structural evolution of the Gavarnie nappe in a region extending from Heas in France to the Valle de Pineta in Spain can be explained in terms of a piggy-back thrusting sequence. On a regional scale, thrust-tectonic models may be used to explain the double vergence of the Pyrenean chain where early southward-directed thrusting was responsible for structures in the South Pyrenean zone. A later northward-directed back thrusting event, or rotation of southward-directed thrust sheets by the stacking of lower thrust horses, can explain the steepness of structures in the axial zone and the northward-verging North Pyrenean thrust zone. Both models suggest that prior to the Pyrenean orogeny, some of the Hercynian structures in the axial zone were flatter lying, and have been rotated to their present steepness during the Pyrenean orogeny. 相似文献
3.
《Geodinamica Acta》2013,26(6):417-430
The Longi-Taormina Unit forms the “Dorsale calcaire” of the Peloritani Alpine Belt (southern Calabria-Peloritani Arc). It is made by a thick sedimentary cover of Meso-Cenozoic age overlying a Variscan weakly metamorphosed Cambrian to Carboniferous succession. The Palaeozoic series consists of pelitic to arenaceous sediments containing layers of acidic and basic volcanics. The acidic volcanics are affected by the “Caledonian” compressional deformations and are referred to Early Ordovician. The basic rocks belong to two different volcanic cycles; the first, not dated, is ascribed to the Caledonian cycle according to its geochemical signature; whereas the second, middle-late Devonian in age, is interpreted to have formed in the framework of pre-Variscan extensional tectonics. During the Variscan Orogeny (330 Ma), the area recorded metamorphism up to subgreenschist-to-greenschist facies and two main deformation phases, marked by syn-schistose early folds (Dv1), overprinted by dominantly NW-SE trending late folds (Dv2). During the Aquitanian, deformation related to the Alpine Orogeny led to imbrication of the Palaeozoic and Meso-Cenozoic series. The sedimentary cover was affected by a series of N090° to N130° trending folds. Detailed stratigraphical and structural investigations on the tectonic contact between the Longi-Taormina Unit, and the overlying Fondachelli Unit indicate that this structure is part of a frontal thrust ramp which developed during the Aquitanian. Our geological and structural studies on the Cambrian to Aquitanian rocks of the Longi-Taormina Unit of the Calabria-Peloritani Arc enable to unravel the complex geodynamic history of the central-western Mediterranean area. 相似文献
4.
The Peloritani Mountains are a fragment of an orogen variably attributed to the Alpine or Hercynian orogeny. On the basis of 39Ar-40Ar, U-Pb and Rb-Sr dating, the main metamorphism of the two medium–high grade metamorphic units, the Mela and Aspromonte Units, and most of the thrusting responsible for stacking the orogenic edifice are seen to be Hercynian. The main thrusting of the Aspromonte Unit over the lower grade units took place at 301±2 Ma. Brittle deformation during Tertiary reactivation of Hercynian thrust planes did not generate any rejuvenation of white micas in the studied sector. Our dataset shows a great complexity and we propose to unravel it by considering different levels of information. To first order, the Mela and Aspromonte Units differ in their metamorphic paths and their geochronological evolution. The Mela Unit shows generally younger ages (Carboniferous) than the Aspromonte Unit and, unlike the latter, was extensively retrogressed in greenschist facies. The Aspromonte Unit is itself geochronologically heterogeneous. Proterozoic ages are preserved both in titanite and in amphibole relics of one tectonic subunit; Devonian to Carboniferous amphibole ages are found in different other subunits; tertiary overprint is minor and spatially limited. We propose to consider the chronologically heterogeneous subunits as accreted pre-Hercynian terranes amalgamated late during the Hercynian orogeny. Micas in both units give scattered Mesozoic 39Ar-40Ar and Rb-Sr ages, with evidence for heterochemical mica generations. We interpret them as a result of widespread hydrothermal circulation event(s). Tertiary overprint is generally absent, with the exception of a small area near Messina where biotite and muscovite underwent a complex recrystallisation history in the interval between 48 and 61 Ma.An erratum to this article can be found at 相似文献
5.
James F. Tull 《Journal of Structural Geology》1984,6(3):223-234
Late Palaeozoic deformation in the southern Appalachians is believed to be related to the collisional events that formed Pangaea. The Appalachian foreland fold and thrust belt in Alabama is a region of thin-skinned deformed Palaeozoic sedimentary rocks ranging in age from Early Cambrian to Late Carboniferous, bounded to the northwest by relatively undeformed rocks of the Appalachian Plateau and to the southeast by crystalline thrust sheets containing metasedimentary and metaigneous rocks ranging in age from late Precambrian to Early Devonian. A late Palaeozoic kinematic sequence derived for a part of this region indicates complex spatial and temporal relationships between folding, thrusting, and tectonic level of décollement. Earliest recognized (Carboniferous(?) or younger) compressional deformation in the foreland, observable within the southernmost thrust sheets in the foreland, is a set of large-scale, tight to isoclinal upright folds which preceded thrafing, and may represent the initial wave of compression in the foreland. Stage 2 involved emplacement of low-angle far-traveled thrust sheets which cut Lower Carboniferous rocks and cut progressively to lower tectonic levels to the southwest, terminating with arrival onto the foreland rocks of a low-grade crystalline nappe. Stage 3 involved redeformation of the stage 2 nappe pile by large-scale upright folds oriented approximately parallel to the former thrusts and believed to be related to ramping or imbrication from a deeper décollement in the foreland rocks below. Stage 4 involved renewed low-angle thrusting within the Piedmont rocks, emplacement of a high-grade metamorphic thrust sheet, and decapitation of stage 3 folds. Stage 5 is represented by large-scale cross-folding at a high angle to previous thrust boundaries and fold phases, and may be related to ramping or imbrication on deep décollements within the now mostly buried Ouachita orogen thrust belt to the southwest. Superposed upon these folds are stage 6 high-angle thrust faults with Appalachian trends representing the youngest (Late Carboniferous or younger, structures in the kinematic sequence. 相似文献
6.
V. J. Morand 《Australian Journal of Earth Sciences》2013,60(3):257-270
The Late Silurian to Middle Devonian Calliope Volcanic Assemblage in the Rockhampton region is deformed into a set of northwest‐trending gently plunging folds with steep axial plane cleavage. Folds become tighter and cleavage intensifies towards the bounding Yarrol Fault to the east. These folds and associated cleavage also deformed Carboniferous and Permian rocks, and the age of this deformation is Middle to Late Permian (Hunter‐Bowen Orogeny). In the Stanage Bay area, both the Calliope Volcanic Assemblage and younger strata generally have one cleavage, although here it strikes north to northeast. This cleavage is also considered to be of Hunter‐Bowen age. Metamorphic grade in the Calliope Volcanic Assemblage ranges from prehnite‐pumpellyite to greenschist facies, with higher grades in the more strongly cleaved rocks. In the Rockhampton region the Calliope Volcanic Assemblage is part of a west‐vergent fold and thrust belt, the Yarrol Fault representing a major thrust within this system. A Late Devonian unconformity followed minor folding of the Calliope Volcanic Assemblage, but no cleavage was formed. The unconformity does not represent a collision between an exotic island arc and continental Australia as previously suggested. 相似文献
7.
8.
In Cap Corse, progressive deformation during Late Cretaceous obduction of the ophiolitic Schistes Lustrés (sensu lato) as a pile of imbricate, lens-shaped units during blueschist facies metamorphism was non-coaxial. Two zones are recognized: a lower series emplaced towards the west is overlain by a series emplaced towards the south-southwest in Cap Corse. Equivalent structures (differing only in orientation) occur in both zones. The change in thrust direction was responsible for local refolding and reorientation of previously formed structures, parallel to the new stretching direction immediately below the thrust contact between the two zones, and within localized shear zones in the underlying series.Both zones are refolded about E-overturned F2 folds trending between 350 and 025°. Local minor E-directed thrusts occur associated with the F2 folds. This second deformation of Middle Eocene age is considered to be related to the backthrusting of an overlying klippe containing gneisses of South Alpine origin, and is followed by a third Late Eocene phase of upright 060°-trending F3 folds accompanied by greenschist facies metamorphism. 相似文献
9.
In the Pyrenees, the development of mylonites zones is one of the most striking structural features. Two sets of mylonites of regional extent have been recognized: large longitudinal E-W to N110°E trending zones (e.g. Mérens fault and North Pyrenean fault) and oblique NW-SE trending zones cross-cutting both the Hercynian and the post-Hercynian terrains. The longitudinal zones limit the major structural zones of the Pyrenees and are associated with NW-SE “en échelons” folds in the Mesozoic terrains and rotations of rootless plutonic or gneissic massifs, acting as competent inclusions in a more ductile matrix, in the Hercynian basement. The oblique mylonite zones limit map-scale fold-bands and appear as the sheared limbs of these folds.The age of the oblique zones and of the major movements along the longitudinal zones is clearly Alpine and the “en échelons” folds seem to have controlled the sedimentation during the Upper Albian and possibly during the Upper Cretaceous. Early movements along the longitudinal zones may have been Hercynian.The analysis of the structures at all scales leads us to interpret these mylonite zones and associated structures as the ultimate result of a transcurrent simple shear acting during the whole Mesozoic period. This strike-slip shearing was probably associated with an extension perpendicular to it from the Permian to the Upper Cretaceous and then to a shortening component also perpendicular to it from the Late Cretaceous to the Eocene.The development of the mylonite zones appears to have predated the major Alpine thrusting but to have been reactivated during this thrusting, acting as initiation sites for the thrusts or as oblique ramps in the case of the oblique mylonite zones. 相似文献
10.
F. Moseley J.C. Cuttell E.W. Lange D. Stevens J.R. Warbrick 《Journal of Structural Geology》1981,3(3):237-251
The Pre-Betic is the most northerly of the Alpine zones forming the Betic Cordilleras of southern Spain. It consists of strongly folded and faulted Mesozoic and Tertiary rocks, the oldest of which are ferruginous and gypsiferous Triassic mudstones, followed by a predominantly carbonate facies of Cretaceous, Palaeogene and Miocene age. Although this sequence is interrupted by a number of minor unconformities, the major structures were formed during the middle or late Miocene. The highly incompetent Triassic rocks are the most strongly deformed, and form diapiric intrusions discordant to regional structural trends in the younger rocks. The latter are essentially of two facies: massive competent limestones which are deformed by relatively simple folds of large wavelength, and highly incompetent marl-limestone interbeds with complex disharmonic folds and crush belts. Faults include low-angle and high-angle thrusts, gravity slides and wrench faults. The regional tectonic strike is ENE to NE, but the diapiric intrusions mostly follow WNW and N directions. These intrusions have pushed the younger rocks aside, the result being polyphase structures of several trends.Less intense post-Miocene tectonics are mostly associated with continued diapirism and have resulted in the folding and tilting of the late Miocene to Quaternary elastic sediments. 相似文献
11.
We can distinguish four main units within the Marimanya massif: the Cambro-Ordovician detrital series; a carbonate unit, mainly made up of massive limestones dated as Silurian-Devonian; dark slates and limestones dated as Middle-Upper Devonian; and the late Hercynian Marimanya intrusive, mainly composed of granites and granodiorites. Mapping has shown that the carbonate units lie on different levels of the Cambro-Ordovician series and even on the dark slates and limestones. This abnormal contact is demonstrated to be a thrust. The thrusting surface is affected by Hercynian folds with vertical axial planes, a fold axis trending E-W and an associated cleavage. Moreover, it is cut by the late Hercynian intrusive. Consequently, considering paleontological and structural data as well as the regional context, the most reasonable interpretation is that this structure represents a Hercynian thrust, probably with southward displacement. 相似文献
12.
M.W. Fischer 《Journal of Structural Geology》1984,6(6):721-726
Balanced and restored cross-sections through the central and eastern Pyrenees, constructed using both surface and borehole data, demonstrate the presence of c.18km of shortening above a flat lying N-directed Alpine décollement surface. Hangingwall diagrams show how the North Pyrenean satellite massifs are culminations within this thrust system. Pre-thrusting structures such as subhorizontal stretching lineations in the North Pyrenean Fault zone became rotated above these culminations as the North Pyrenean Fault was cut by Alpine thrusts. Stratigraphic evidence demonstrates that N-directed thrust movements occurred between mid Eocene and Oligocene time, and this is similar to the age of major S-directed thrust movements on the south side of the Axial Zone. The N-directed thrust system probably originated as a series of backthrusts to the dominant S-directed structures. 相似文献
13.
From the early Late Permian onwards, the northeastern part of the Sydney Basin, New South Wales, (encompassing the Hunter Coalfield) developed as a foreland basin to the rising New England Orogen lying to the east and northeast. Structurally, Permian rocks in the Hunter Coalfield lie in the frontal part of a foreland fold‐thrust belt that propagated westwards from the adjacent New England Orogen. Thrust faults and folds are common in the inner part of the Sydney Basin. Small‐scale thrusts are restricted to individual stratigraphic units (with a major ‘upper decollement horizon’ occurring in the mechanically weak Mulbring Siltstone), but major thrusts are inferred to sole into a floor thrust at a poorly constrained depth of approximately 3 km. Folds appear to have formed mainly as hangingwall anticlines above these splaying thrust faults. Other folds formed as flat‐topped anticlines developed above ramps in that floor thrust, as intervening synclines ahead of such ramp anticlines, or as decollement folds. These contractional structures were overprinted by extensional faults developed during compressional deformation or afterwards during post‐thrusting relaxation and/or subsequent extension. The southern part of the Hunter Coalfield (and the Newcastle Coalfield to the east) occupies a structural recess in the western margin of the New England Orogen and its offshore continuation, the Currarong Orogen. Rocks in this recess underwent a two‐stage deformation history. West‐northwest‐trending stage one structures such as the southern part of the Hunter Thrust and the Hunter River Transverse Zone (a reactivated syndepositional transfer fault) developed in response to maximum regional compression from the east‐northeast. These were followed by stage two folds and thrusts oriented north‐south and developed from maximum compression oriented east‐west. The Hunter Thrust itself was folded by these later folds, and the Hunter River Transverse Zone underwent strike‐slip reactivation. 相似文献
14.
《Sedimentary Geology》2002,146(1-2):133-154
The Catalan Coastal ranges are the alpine structural unit parallel to the Mediterranean coast in the NE of the Iberian Peninsula. They shape the southeastern margin of the Ebro Foreland basin (the latest stage of the South Pyrenean Foreland trough). The Paleogene sedimentary evolution of this basin margin is closely related to the tectonic evolution of the adjoining Catalan Coastal ranges, a transpressive chain characterized mainly by contractional structures (NNW-verging folds and thrusts).The syntectonic condition of the Paleogene deposits of the Ebro basin is evidenced by facies directly related to the growth of specific structures, thinning, fanning and truncation of the sedimentary units towards the growing structures, as well as to abrupt changes in the composition of the coarse-grained sediments caused by tectonic activity or landslides in the catchment area.A tectonosedimentary evolution of approximately 17 Ma has been deduced: (a) folds and thrusts involving Mesozoic rocks were developed during Ypresian (resulting in the deposition of Mesozoic cover derived breccias); (b) large-scale fold growth mostly from Lutetian to early Bartonian (leading to progressive unconformities, fanning and growth strata); and (c) out-of-sequence basement-involving thrusting during Lutetian and Bartonian (development of large alluvial fans). These events did not take place simultaneously along the 30-km long basin margin studied. There is a clear NE to SW migration of the deformation, as observed along the whole Catalan Coastal ranges and the South Pyrenean Foreland basin. 相似文献
15.
Thierry Dumont Jean-Daniel Champagnac Christian Crouzet Philippe Rochat 《Swiss Journal of Geoscience》2008,101(1):89-110
Three-dimensional modelling tools are used with structural and palaeomagnetic analysis to constrain the tectonic history of part of the Dauphiné zone (external Western Alps). Four compressive events are identified, three of them being older than the latest Oligocene. Deformation D1 consists of W–SW directed folds in the Mesozoic cover of the study area. This event, better recorded in the central and southern Pelvoux massif, could be of Eocene age or older. Deformation D2 induced N-NW-oriented basement thrusting and affected the whole southern Dauphiné basement massifs south of the study area. The main compressional event in the study area (D3) was WNW oriented and occurred before 24 Ma under a thick tectonic load probably of Penninic nappes. The D2-D3 shift corresponds to a rapid transition from northward propagation of the Alpine collision directly driven by Africa-Europe convergence, to the onset of westward escape into the Western Alpine arc. This Oligocene change in the collisional regime is recorded in the whole Alpine realm, and led to the activation of the Insubric line. The last event (D4) is late Miocene in age and coeval with the final uplift of the Grandes Rousses and Belledonne external massifs. It produced strike-slip faulting and local rotations that significantly deformed earlier Alpine folds and thrusts, Tethyan fault blocks and Hercynian structures. 3D modelling of an initially horizontal surface, the interface between basement and Mesozoic cover, highlights large-scale basement involved asymmetric folding that is also detected using structural analysis. Both, Jurassic block faulting and basement fold-and-thrust shortening were strongly dependent on the orientation of Tethyan extension and Alpine shortening relative to the late Hercynian fabric. The latter’s reactivation in response to oblique Jurassic extension produced an en-échelon syn-rift fault pattern, best developed in the western, strongly foliated basement units. Its Alpine reactivation occurred with maximum efficiency during the early stages of lateral escape, with tectonic transport in the overlying units being sub-perpendicular to it. 相似文献
16.
The Gran Sasso chain in Central Italy is made up of an imbricate stack of eight thrust sheets, which were emplaced over the Upper Miocene—Lower Pliocene Laga Flysch. The thrust sheets are numbered from 1 to 8 in order of their decreasing elevation in the tectonic stack, and their basal thrusts are numbered from T1 to T8, accordingly. On the basis of their different deformation features, the major thrust faults fall into three groups: (1) thrust faults marked by thick belts of incoherent gouges and breccia zones (T1, T2, T3); (2) thrust faults characterized by a sharp plane which truncates folds that had developed in the footwall rocks (T5, T6); and (3) thrust faults truncating folds developed in both the hangingwall and footwall units, and bordered by foliated fault rocks (T7). The deformation features observed for the different faults seem to vary because of two combined factors: (1) lithologic changes in the footwall and hangingwall units separated by the thrust faults; and (2) increasing amounts of deformation in the deepest portions of the imbricate stack. The upper thrust sheets (from 1 to 6) are characterized by massive calcareous and dolomitic rocks, they maintain a homoclinal setting and are truncated up-section by the cataclastic thrust faults. The lowermost thrust sheets (7 and 8) are characterized by a multilayer with competence contrasts, which undergoes shear-induced folding prior to the final emplacement of the thrust sheets. Bedding and axial planes of folds rotate progressively towards the T5, T6, T7 and T8 thrust boundaries, and are subsequently truncated by propagation of the brittle thrust faults. The maximum deformation is observed along the T7 thrust fault, consistent with horizontal displacement that increases progressively from the uppermost to the lowermost thrust sheet in the tectonic stack. The axial planes of the folds developed in the hangingwall and footwall units are parallel to the T7 thrust fault, and foliated fault rocks have developed. Field data and petrographic analysis indicate that cleavage fabrics in the fault rocks form by a combination of cataclasis, cataclastic flow and pressure-solution slip, associated with pervasive shearing along subtly distributed slip zones parallel to the T7 thrust fault. The development of such fabrics at upper crustal levels creates easy-slip conditions in progressively thinner domains, which are regions of localized flow during the thrust sheet emplacement. 相似文献
17.
At the end of the western part of Bagharan Kuh Mountain in the northeast of Iran, mountain growth has been stopped toward the west because of the stress having been consumed by the thrusting movements and region rising instead of shear movement. Chahkand fault zone is situated at the western part of this mountain; this fault zone includes several thrust sheets that caused upper cretaceous ophiolite rocks up to younger units, peridotite exposure and fault related fold developing in the surface. In transverse perpendicular to the mountain toward the north, reduction in the parameters like faults dip, amount of deformation, peridotite outcrops show faults growth sequence and thrust sheets growth from mountain to plain, thus structural vergence is toward the northeast in this fault zone. Deformation in the east part of the region caused fault propagation fold with axial trend of WNW-ESE that is compatible with trending of fault plane. In the middle part, two types of folds is observed; in the first type, folding occurred before faulting and folds was cut by back thrust activity; in the second type, faults activity caused fault related folds with N60-90W axial trend. In order to hanging wall strain balance, back thrusts have been developed in the middle and western part which caused popup and fault bend folds with N20-70E trend. Back thrusts activity formed footwall synclines, micro folds, foliations, and uplift in this part of the region. Kinematic analysis of faults show stress axis σ1 = N201.6, 7, σ2 = N292.6, 7.1, σ3 = N64.8, 79.5; stress axis obtained by fold analysis confirm that minimum stress (σ3) is close to vertical so it is compatible with fault analysis. Based on the results, deformation in this region is controlled by compressional stress regime. This stress state is consistent with the direction of convergence between the Arabian and Eurasian plates. Also study of transposition, folded veins, different movements on the fault planes and back thrusts confirm the progressive deformation is dominant in this region that it increases from the east to the west. 相似文献
18.
Timing of metamorphism in the Tauern Window, Eastern Alps: Rb-Sr ages and fabric formation 总被引：3，自引：0，他引：3
The Peripheral Schieferhülle of the Tauern Window of the Eastern Alps represents post-Hercynian Penninic cover sequences and preserves a record of metamorphism in the Alpine orogeny, without the inherited remnants of Hercynian events that are retained in basement rocks. The temperature-time-deformation history of rocks at the lower levels of these cover sequences have been investigated by geochronological and petrographic study of units whose P-T evolution and structural setting are already well understood. The Eclogite Zone of the central Tauern formed from protoliths with Penninic cover affinities, and suffered early Alpine eclogite facies metamorphism before tectonic interposition between basement and cover. It then shared a common metamorphic history with these units, experiencing blueschist facies and subsequent greenschist facies conditions in the Alpine orogeny. The greenschist facies phase, associated with penetrative deformation in the cover and the influx of aqueous fluids, reset Sr isotopes in metasediments throughout the eclogite zone and cover schists, recording deformation and peak metamorphism at 28-30 Ma. The Peripheral Schieferhülle of the south-east Tauern Window yields Rb-Sr white mica ages which can be tied to the structural evolution of the metamorphic pile. Early prograde fabrics pre-date 31 Ma, and were reworked by the formation of the large north-east vergent Sonnblick fold structure at 28 Ma. Peak metamorphism post-dated this deformation, but by contrast to the equivalent levels in the central Tauern, peak metamorphic conditions did not lead to widespread homogenization of the Sr isotopes. Localized deformation continued into the cooling path until at least 23 Ma, partially or wholly resetting Sr white mica ages in some samples. These isotopic ages may be integrated with structural data in regional tectonic models, and may constrain changes in the style of crustal deformation and plate interaction. However, such interpretations must accommodate the demonstrable variation in thermal histories over small distances. 相似文献
19.
In northwest Spain thrust sheets occur in an arcuate fold belt. The fault style consists of an array of thrusts, merging downdip into a single décollement surface. Most of the thrust sheets were initiated as thrusts cutting across flat lying beds. Folds above the hanging-wall ramps and some minor structures indicate that the body of the nappes has been subjected to an inhomogeneous simple shear parallel to bedding (y = 1.15), with slip concentrated along bedding planes. This allows the rocks forming the nappe to remain unstrained. At the base of the nappes a thin zone of deformed rock exists. The thrust sheets die out laterally against an anticline-syncline couple, oblique to the thrust direction. A geometrical analysis shows that if anticline and syncline axes are oblique, the thrust sheet was emplaced with a rotational movement, which can be evaluated. As deformation progressed two sets of folds were formed: a circumferential set, following the arc, and a radial set. An arcuate trace of the thrust structures remains after unfolding the radial folds. With a rotational emplacement, the displacement vector for successive points has a progressively greater length, and forms a progressively lower angle with the thrust. The main thrust units are broken into several slices with rotational movements, so that each unit was curved as it was being emplaced, producing a first tightening of the arc. Later folding increased the arc curvature to its present shape. The palaeomagnetic data available support the above conclusions. 相似文献
20.
Graham D. Williams 《Journal of Structural Geology》1985,7(1):11-17
Surface structural data and published stratigraphies are combined to construct two balanced and restored sections through the Nogueras Zone of the south central Pyrenees. The allochthonous Nogueras Zone units are interpreted as the foreland-dipping margin of a major antiformal stack in the Palaeozoic rocks of the Pyrenean Axial Zone. Their structural evolution is summarized in a hangingwall sequence diagram. This reinterpretation of the Nogueras Zone is incorporated into a new NS balanced and restored section from the centre of the Pyrenean Axial Zone to the Ebro Basin. A classical ‘Rocky Mountains’ piggy-back thrust model is employed and the resulting section is a significant departure from those previously published. It is argued that ‘gravity gliding’ has never been an important mechanism in the Alpine Pyrenees. Section restoration casts doubt on the correlation of the surface expression of the North Pyrenean Fault and the seismically detected Moho step beneath it. 相似文献