共查询到20条相似文献，搜索用时 46 毫秒
1.
This paper presents a methodology for identifying soil permeability from pressuremeter test. On the first part we present a numerical analysis of the permeability effects on the test results. We demonstrate that different drainage conditions arise during test, as a function of the loading rate and the soil permeability. We also studied the pore pressure dissipation during strain holding stages. Based on this analysis of these tests, we propose a general procedure to identify simultaneously mechanical parameters and permeability from pressuremeter tests with strain holding test stages. This procedure was applied on tests performed on natural Saint–Herblain clay. An apparatus called pressio‐triax was developed for this purpose. The values of the mechanical parameters as well as of the permeability value were found to agree very well with the values of the same parameters obtained from conventional laboratory tests. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
2.
This paper discusses the quality of the procedure employed in identifying soil parameters by inverse analysis. This procedure includes a FEM‐simulation for which two constitutive models—a linear elastic perfectly plastic Mohr–Coulomb model and a strain‐hardening elasto‐plastic model—are successively considered. Two kinds of optimization algorithms have been used: a deterministic simplex method and a stochastic genetic method. The soil data come from the results of two pressuremeter tests, complemented by triaxial and resonant column testing. First, the inverse analysis has been performed separately on each pressuremeter test. The genetic method presents the advantage of providing a collection of satisfactory solutions, among which a geotechnical engineer has to choose the optimal one based on his scientific background and/or additional analyses based on further experimental test results. This advantage is enhanced when all the constitutive parameters sensitive to the considered problem have to be identified without restrictions in the search space. Second, the experimental values of the two pressuremeter tests have been processed simultaneously, so that the inverse analysis becomes a multi‐objective optimization problem. The genetic method allows the user to choose the most suitable parameter set according to the Pareto frontier and to guarantee the coherence between the tests. The sets of optimized parameters obtained from inverse analyses are then used to calculate the response of a spread footing, which is part of a predictive benchmark. The numerical results with respect to both the constitutive models and the inverse analysis procedure are discussed. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
3.
4.
为了认识冻土旁压试验结果与常规试验结果之间的关系,在室内分别开展了冻结重塑黏土的旁压试验和单轴压缩试验,并对试验结果进行了对比分析。结果表明,在各级荷载作用下旁压曲线一般都呈现应变速率衰减的趋势,而单轴曲线在冻土破坏时会出现渐进流动阶段。旁压试验的应力-应变曲线呈现应变硬化型,而且出现初始拟弹性阶段;而单轴试验的应力-应变曲线则属于应变软化型,并在轴向应变大约为10%时达到剪应力峰值。温度相同时,旁压试验的剪切强度以及初始弹性模量都要大于单轴试验,且温度越低差值越大。 相似文献
5.
A bounding surface elasto‐viscoplastic constitutive model for non‐isothermal cyclic analysis of asphaltic materials 
下载免费PDF全文
下载免费PDF全文 An elasto‐viscoplastic constitutive model for asphaltic materials is presented within the context of bounding surface plasticity theory, taking into account the effects of the stress state, void binder degree of saturation, temperature and strain rate on the material behaviour. A stress state dependent non‐linear elasticity model is introduced to represent time‐independent recoverable portion of the deformation. The consistent visco‐plasticity framework is utilised to capture the rate‐dependent, non‐recoverable strain components. The material parameters introduced in the model are identified, and their determination from conventional laboratory tests is discussed. The capability of the model to reproduce experimentally observed response of asphaltic materials is demonstrated through numerical simulations of several laboratory test data from the literature. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
6.
Akira Murakami Takayuki Shuku Shin‐ichi Nishimura Kazunori Fujisawa Kazuyuki Nakamura 《国际地质力学数值与分析法杂志》2013,37(11):1642-1669
A computational method, incorporating the finite element model (FEM) into data assimilation using the particle filter, is presented for identifying elasto‐plastic material properties based on sequential measurements under the known changing traction boundary conditions to overcome some difficulties in identifying the parameters for elasto‐plastic problems from which the existing inverse analysis strategies have suffered. A soil–water coupled problem, which uses the elasto‐plastic constitutive model, is dealt with as the geotechnical application. Measured data on the settlement and the pore pressure are obtained from a synthetic FEM computation as the forward problem under the known parameters to be identified for both the element tests and the ground behavior during the embankment construction sequence. Parameter identification for elasto‐plastic problems, such as soil behavior, should be made by considering the measurements of deformation and/or pore pressure step by step from the initial stage of construction and throughout the deformation history under the changing traction boundary conditions because of the embankment or the excavation because the ground behavior is highly dependent on the loading history. Thus, it appears that sequential data assimilation techniques, such as the particle filter, are the preferable tools that can provide estimates of the state variables, that is, deformation, pore pressure, and unknown parameters, for the constitutive model in geotechnical practice. The present paper discusses the priority of the particle filter in its application to initial/boundary value problems for elasto‐plastic materials and demonstrates a couple of numerical examples. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
7.
Optimization techniques for identifying soil parameters in geotechnical engineering: Comparative study and enhancement 下载免费PDF全文
下载免费PDF全文 A comparative study of optimization techniques for identifying soil parameters in geotechnical engineering was first presented. The identification methodology with its 3 main parts, error function, search strategy, and identification procedure, was introduced and summarized. Then, current optimization methods were reviewed and classified into 3 categories with an introduction to their basic principles and applications in geotechnical engineering. A comparative study on the identification of model parameters from a synthetic pressuremeter and an excavation tests was then performed by using 5 among the mostly common optimization methods, including genetic algorithms, particle swarm optimization, simulated annealing, the differential evolution algorithm and the artificial bee colony algorithm. The results demonstrated that the differential evolution had the strongest search ability but the slowest convergence speed. All the selected methods could reach approximate solutions with very small objective errors, but these solutions were different from the preset parameters. To improve the identification performance, an enhanced algorithm was developed by implementing the Nelder‐Mead simplex method in a differential algorithm to accelerate the convergence speed with strong reliable search ability. The performance of the enhanced optimization algorithm was finally highlighted by identifying the Mohr‐Coulomb parameters from the 2 same synthetic cases and from 2 real pressuremeter tests in sand, and ANICREEP parameters from 2 real pressuremeter tests in soft clay. 相似文献
8.
An objective of this paper is to demonstrate that the small strain model developed by the authors can be incorporated into the conventional kinematic hardening plasticity framework to predict pre‐failure defor mations. The constitutive model described in this paper is constituted by three elliptical yield surfaces in triaxial stress space. Two inner surfaces are rotated ellipses of the same shape, representing the boundaries of the linear elastic and small strain regions, while the third surface is the modified Cam clay large‐scale yield surface. Within the linear elastic region, the soil behaviour is elastic with cross‐coupling between the shear and volumetric stress–strain components. Within the small strain region, the soil behaviour is elasto‐plastic, described by the kinematic hardening rule with an infinite number of loading surfaces defined by the incremental energy criterion. Within the large‐scale yield surface, the soil behaviour is elasto‐plastic, described by kinematic and isotropic hardening of the small strain region boundary. Since the yield surfaces have different shapes, the uniqueness of the plastic loading condition imposes a restriction on the ratio between their semi‐diameters. The model requires 12 parameters, which can be determined from a single consolidated undrained triaxial compression test. Copyright © 2000 John Wiley & Sons, Ltd. 相似文献
9.
This paper presents an elasto‐plastic model for non‐linear analyses of cement‐treated sand. Various laboratory tests were systematically carried out to investigate the pre‐peak and post‐peak behaviours of a cement‐treated sand. On the basis of these experimental results, the new model was built within the framework of a relatively simple elasto‐plastic theory. Two failure criteria are employed to express tensile and shear failure characteristics observed in the experimental results of the cement‐treated sand. The proposed model can describe strain‐hardening and strain‐softening responses under both failure modes. In the strain‐softening rules, the smeared crack concept is used, and a characteristic length is considered to avoid the issue of mesh‐size dependency. Since the failure criterion and strain‐hardening/softening rules are based on the experimental evidences, the model is relatively easy to understand and the parameters used in the model have clear physical meaning. The proposed model was applied to simulate the behaviour of cement‐treated sand in various laboratory tests, allowing for a reasonable comprehensive evaluation. It was demonstrated that the proposed model is suitable for describing both the tensile and shear failure behaviours of cement‐treated sand. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
10.
This paper presents a relatively simple method for three‐dimensional liquefaction analysis of granular soil under offshore foundations. In this method, the Mohr–Coulomb model, which defines the elasto–plastic stress–strain relationship under monotonic loading, is modified to accommodate the plastic strains generated by cyclic loading. The effects of cyclic loading, evaluated from the results of laboratory tests on saturated samples of soil, are incorporated into the model. The method is implemented in an efficient finite element program for analyses of three‐dimensional consolidating soil. The practicability of the model is demonstrated by analysis of a typical offshore foundation, and the predictions of the numerical analysis are compared with the observed behaviour of the foundation. Copyright © 2000 John Wiley & Sons, Ltd. 相似文献
11.
12.
Christophe Dano Pierre‐Yves Hicher Damien Rangeard Philippe Marchina 《国际地质力学数值与分析法杂志》2007,31(10):1197-1215
This paper presents a prospective study for identifying selected parameters of the modified Cam‐Clay model representing the behaviour of heavy oil reservoirs. The first part shows that the plastic compressibility, which controls the main recovery mechanism of such reservoirs, can be accurately determined, simultaneously with other parameters, by an inverse analysis of pressure–strain curves. The conditions of the identification procedure mainly involve two tests conducted under different drainage conditions or at different strain rates. The numerical study also establishes the sequence of an original in situ experimental program, in which three dilatometer tests at a relatively great depth (several hundreds of metres) were carried out. The comparison of the experimental data with the numerical computations reveals a significant over‐consolidation ratio which does not allow the plastic compressibility to be determined but supports the findings regarding the geological erosion of the site. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
13.
This paper presents a numerical model for the elasto‐plastic electro‐osmosis consolidation of unsaturated clays experiencing large strains, by considering electro‐osmosis and hydro‐mechanical flows in a deformable multiphase porous medium. The coupled governing equations involving the pore water flow, pore gas flow, electric flow and mechanical deformation in unsaturated clays are derived within the framework of averaging theory and solved numerically using finite elements. The displacements of the solid phase, the pressure of the water phase, the pressure of the gas phase and the electric potential are taken as the primary unknowns in the proposed model. The nonlinear variation of transport parameters during electro‐osmosis consolidation are incorporated into the model using empirical expressions that strongly depend on the degree of water saturation, whereas the Barcelona Basic Model is employed to simulate the elasto‐plastic mechanical behaviour of unsaturated clays. The accuracy of the proposed model is evaluated by validating it against two well‐known numerical examples, involving electro‐osmosis and unsaturated soil behaviour respectively. Two further examples are then investigated to study the capability of the computational algorithm in modelling multiphase flow in electro‐osmosis consolidation. Finally, the effects of gas generation at the anode, the deformation characteristics, the degree of saturation and the time dependent evolution of the excess pore pressure are discussed. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
14.
This paper presents a numerical procedure of material parameter identification for the coupled hydro‐mechanical boundary value problem (BVP) of the self‐boring pressuremeter test (SBPT) in clay. First, the neural network (NN) technique is applied to obtain an initial estimate of model parameters, taking into account the possible drainage conditions during the expansion test. This technique is used to avoid potential pitfalls related to the conventional gradient‐based optimization techniques, considered here as a corrector that improves predicted parameters. Parameter identification based on measurements obtained through the pressuremeter expansion test and two types of holding tests is illustrated on the Modified Cam clay model. NNs are trained using a set of test samples, which are generated by means of finite element simulations of SBPT. The measurements obtained through expansion and consolidation tests are normalized so that NN predictors operate independently of the testing depth. Examples of parameter determination are demonstrated on both numerical and field data. The efficiency of the combined parameter identification in terms of accuracy, effectiveness and computational effort is also discussed. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
15.
This paper describes a modified elasto‐plasticity damage model to capture monotonic and cyclic behavior of the interface between a geotextile and gravelly soil. New damage variable and shear strength criterion are introduced on the basis of test observations. The formulations of the modified model are obtained by extending those of the original interface model. The model parameters with physical meaning are easily determined from a group of cyclic shear tests and a confining compression test. The model predictions are compared with the results of a series of direct shear tests and large‐scale pullout tests. The comparison results demonstrate that the model accurately describes the monotonic and cyclic stress–strain relationship of the interface between a geotextile and gravelly soil while capturing new characteristics: (1) the strength that is nonlinearly dependent on the normal stress; (2) significant shear strain‐softening; (3) the comprehensive volumetric strain response with dependency on the shear direction; and (4) the evolution of behavior associated with the changes in the physical state that includes the geotextile damage. This model is used in a finite element analysis of pullout tests, indicating that the tensile modulus of a geotextile has a significant effect on the response of the geotextile–gravel system. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
16.
Optimization framework for calibration of constitutive models enhanced by neural networks 总被引：1，自引：0，他引：1
A two‐level procedure designed for the estimation of constitutive model parameters is presented in this paper. The neural network (NN) approach at the first level is applied to achieve the first approximation of parameters. This technique is used to avoid potential pitfalls related to the conventional gradient‐based optimization techniques, considered here as a corrector that improves predicted parameters. The feed‐forward NN (FFNN) and the modified Gauss–Newton algorithms are briefly presented. The proposed framework is verified for the elasto‐plastic modified Cam Clay model that can be calibrated based on standard triaxial laboratory tests, i.e. the isotropic consolidation test and the drained compression test. Two different formulations of the input data to the NN, enhanced by a dimensional reduction of experimental data using principal component analysis, are presented. The determination of model characteristics is demonstrated, first on numerical pseudo‐experiments and then on the experimental data. The efficiency of the proposed approach by means of accuracy and computational effort is also discussed. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
17.
Ali Soleimanbeigi 《Geotechnical and Geological Engineering》2013,31(5):1511-1524
Undrained shear strength (su) of foundation soil of Marquette interchange near Milwaukee, Wisconsin was evaluated from the results of a number of pressuremeter tests conducted on normally consolidated (NC) organic silts and overconsolidated (OC) silty clay. The su-values were interpreted from traditional closed-form methods. The pressuremeter geometry and test sequence as well as response of the soil profiles were also simulated using axisymmetric finite element (FE) method with Cam-Clay soil model. The Cam-Clay model parameters were estimated from laboratory tests on undisturbed soil samples. Results show that the su estimated from the rate of cavity pressure change with volumetric strain (referred to as direct traditional method) is almost twice the su estimated from an indirect traditional method that estimates su from shear modulus, in situ horizontal stress, and ultimate cavity pressure obtained from the cavity pressure curves. The su-values predicted from the FE models are lower than those estimated from the traditional methods and shows that the assumption of infinite pressuremeter length in traditional methods results in overprediction of undrained shear strength by a factor of 1.5 for NC clay and 2.2 for OC clay. The results of finite element analysis considering Cam-Clay soil model and finite length for pressuremeters suggest the undrained shear strength of 63 ± 7 kPa for NC organic silt and 259 ± 68 kPa for OC silty clay. 相似文献
18.
A multiphase coupled elasto‐viscoplastic finite element analysis formulation, based on the theory of porous media, is used to describe the rainfall infiltration process into a one‐dimensional soil column. Using this framework, we have numerically analyzed the generation of pore water pressure and deformations when rainfall is applied to the soil. A parametric study, including rainfall intensity, soil–water characteristic curves, and permeability, is carried out to observe their influence on the changes in pore water pressure and volumetric strain. From the numerical results, it is shown that the generation of pore water pressure and volumetric strain is mainly controlled by material parameters α and n′ that describe the soil–water characteristic curve. A comparison with the laboratory results shows that the proposed method can describe very well the characteristics observed during the experiments of one‐dimensional water infiltration into a layered unsaturated soil column. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
19.
The purpose of the present paper is to clarify the effects of permeability and initial heterogeneity on the strain localization of fluid‐saturated cohesive soil modelled by a strain gradient‐dependent poro‐viscoplastic constitutive model. The effects of permeability and gradient parameters on the growth rate of the fluctuation were obtained by a linear instability analysis. Deformation behaviour of clay specimens modelled as a viscoplastic model with a second order strain gradient during shear was numerically analysed by a soil–water coupled FEM under both globally undrained and partially drained conditions. It was found that the deformation pattern and the stress–strain curve greatly depend on the permeability, the drainage conditions and the initial non‐homogeneous properties. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
20.
固结与流变特性及其参数取值研究是软基上结构物长期沉降课题的重要组成部分。针对宁波轨道交通工程的两个典型土层,开展了基于GDS固结仪的流变固结试验,获得了土样的主固结与次固结性状参数。采用Gibson三元件流变模型结合Matlab软件的拟合功能,得到了土样的三元件流变模型参数。通过对试验结果进行分析总结,发现宁波软土的次固结过程表现出较明显的非线性。次固结系数Ca与压缩指数Cc近似符合 Ca/Cc=0.02±0.01。宁波软土的一维流变过程符合Gibson三元件流变模型规律,且其模量参数和黏滞系数均随固结压力的增大而增大。 相似文献