共查询到20条相似文献，搜索用时 15 毫秒
1.
Application of desingularized approach to water wave propagation over three-dimensional topography 总被引：1，自引：0，他引：1
A numerical approach based on desingularized boundary element method and mixed Eulerian–Lagrangian formulation [Zhang et al., 2006. Wave propagation in a fully nonlinear numerical wave tank: a desingularized method. Ocean Engineering 33, 2310–2331] is extended to solve the water wave propagation over arbitrary topography in a three-dimensional wave tank. A robust damping layer applicable for regular and irregular incident waves is employed to minimize the outgoing wave reflection back into the wave tank. Numerical results on the propagation of regular and irregular incident waves over the flat bottom and linear incident waves over an elliptical shoal show good concurrence with the corresponding analytical solutions and experimental data. 相似文献
2.
We develop techniques of numerical wave generation in the time-dependent extended mild-slope equations of Suh et al. [1997. Time-dependent equations for wave propagation on rapidly varying topography. Coastal Engineering 32, 91–117] and Lee et al. [2003. Extended mild-slope equation for random waves. Coastal Engineering 48, 277–287] for random waves using a source function method. Numerical results for both regular and irregular waves in one and two horizontal dimensions show that the wave heights and the frequency spectra are properly reproduced. The waves that pass through the wave generation region do not cause any numerical disturbances, showing usefulness of the source function method in avoiding re-reflection problems at the offshore boundary. 相似文献
3.
The Breaking Celerity Index (BCI) is proposed as a new wave breaking criterion for Boussinesq-type equations wave propagation models (BTE).The BCI effectiveness in determining the breaking initiation location has been verified against data from different experimental investigations conducted with incident regular and irregular waves propagating along uniform slope [Utku, M. (1999). “The Relative Trough Froude Number. A New Criteria for Wave Breaking”. Ph.D. Dissertation, Dept. of Civil and Enviromental Engineering, Old Dominion University, Norfolk, VA; Gonsalves Veloso dos Reis, M.T.L. (1992). “Characteristics of waves in the surf zone”. MS Thesis, Department of Civil Engineering, University of Liverpool., Liverpool; Lara, J.L., Losada, I.J., and Liu, P.L.-F. (2006). “Breaking waves over a mild gravel slope: experimental and numerical analysis”. Journal of Geophysical Research, VOL 111, C11019] and barred beaches [Tomasicchio, G.R., and Sancho, F. (2002). “On wave induced undertow at a barred beach”. Proceedings of 28th International Conference on Coastal Engineering, ASCE, New York, 557–569]. The considered experiments were carried out in small-scale and large-scale facilities. In addition, one set of data has been obtained by the use of the COBRAS model based upon the Reynolds Averaged Navier Stokes (RANS) equations [Liu, P.L.-F., Lin, P., Hsu, T., Chang, K., Losada, I.J., Vidal, C., and Sakakiyama, T. (2000). “A Reynolds averaged Navier–Stokes equation model for nonlinear water wave and structure interactions”. Proceedings of Coastal Structures ‘99, Balkema, Rotterdam, 169–174; Losada, I.J., Lara, J.L., and Liu, P.L.-F. (2005). “Numerical simulation based on a RANS model of wave groups on an impermeable slope”. Proceedings of Fifth International Symposium WAVES 2005, Madrid].Numerical simulations have been performed with the 1D-FUNWAVE model [Kirby, J.T., Wei, G., Chen, Q., Kennedy, A.B., and Dalrymple, R.A. (1998). “FUNWAVE 1.0 Fully Nonlinear Boussinesq Wave Model Documentation and User's Manual”. Research Report No CACR-98-06, Center for Applied Coastal Research, University of Delaware, Newark]. With regard to the adopted experimental conditions, the breaking location has been calculated for different trigger mechanisms [Zelt, J.A. (1991). “The run-up of nonbreaking and breaking solitary waves”. Coastal Engineering, 15, 205–246; Kennedy, A.B., Chen, Q., Kirby, J.T., and Dalrymple, R.A. (2000). “Boussinesq modeling of wave transformation, breaking and run-up. I: 1D”. Journal of Waterway, Port, Coastal and Ocean Engineering, 126, 39–47; Utku, M., and Basco, D.R. (2002). “A new criteria for wave breaking based on the Relative Trough Froude Number”. Proceedings of 28th International Conference on Coastal Engineering, ASCE, New York, 258–268] including the proposed BCI.The calculations have shown that BCI gives a better agreement with the physical data with respect to the other trigger criteria, both for spilling and plunging breaking events, with a not negligible reduction of the calculation time. 相似文献
4.
The numerical model COBRAS-UC [Losada, I.J., Lara, J.L., Guanche,R., Gonzalez-Ondina, J.M. (2008). Numerical analysis of wave overtopping of rubble mound breakwaters. Coastal Engineering, Vol 55 (1), 47–62.] is used to carry out a two-dimensional analysis of wave induced loads on coastal structures. The model calculates pressure, forces and moments for two different cross-sections corresponding to a low-mound and a conventional rubble-mound breakwater with a crown-wall under regular and irregular incident wave conditions. Predicted results are compared with experimental information provided in Losada et al. [Losada, I.J., Lara, J.L., Guanche,R., Gonzalez-Ondina, J.M. (2008). Numerical analysis of wave overtopping of rubble mound breakwaters. Coastal Engineering, Vol 55 (1), 47–62.] and Lara et al. [Lara, J.L., Losada, I.J., Guanche, R. (2008). “Wave interaction with low mound breakwaters using a RANS model”. Ocean engineering (35), pp 1388–1400; doi:10.1016/j.oceaneng.2008.05.006.] on a 1:20 scale. Good agreement is found, and the differences between both typologies are explained in detail. Additionally, numerical results are also compared with several semi-empirical formulae recommended for design at both the 1:20 model scale and two prototype cross-sections. Results suggest that COBRAS-UC is able to provide realistic stability information that can be used to complete the approach based on currently existing methods and tools. 相似文献
5.
In this paper, a finite difference scheme with an efficient 2-D numerical wave absorber for solving the extended Boussinesq equations as derived by Nwogu (Nwogu, O., 1993. Alternative form of Boussinesq equations for nearshore wave propagation. J. Waterway, Port, Coastal and Ocean Engineering, ASCE 119, 618–638) is proposed. The alternate direction iterative method combined with an efficient predictor-corrector scheme are adopted for the numerical solution of the governing differential equations. To parameterize the contribution of unresolved small-scale motions, the philosophy of the large eddy simulation is applied on the horizontal plane. The proposed method is verified by two test cases where experimental data are available for comparison. The first case is wave diffraction around a semi-infinite breakwater studied by Briggs et al. (Briggs, M.J., Thompson, E.F., Vincent, C.L., 1995. Wave diffraction around breakwater. Journal of Waterway, Port, Coastal, and Ocean Engineering, ASCE 121, 23–35). The other case is wave concentration by a navigation channel as reported by Yu et al. (Yu, Y.-X., Liu, S.-X., Li, Y.S., Wai, O.W.H., 2000. Refraction and diffraction of random waves through breakwater. Ocean Engineering 27, 489–509). Numerical results agree very well with the corresponding experimental data in both cases. 相似文献
6.
《Coastal Engineering》2006,53(2-3):157-170
Influence of various factors affecting the longshore currents induced by obliquely incident random waves is examined through numerical calculation. Seven numerical models for random wave breaking process are found to yield large differences in the wave heights in the surf zone and longshore current velocities. The turbulent eddy viscosity formulation by Larson and Kraus [Larson, M. and Kraus, N.C. (1991): Numerical model of longshore current for bar and trough beaches, J. Waterway, Port, Coastal, and Ocean Eng., ASCE, 117 (4), pp. 326-347.] functions almost equal to that by Battjes [Battjes, J.A. (1975): Modeling of turbulence in the surf zone, Proc. Symp. Modeling Techniques, pp. 1050–1061.], but the formulation by Longuet-Higgins [Longuet-Higgins, M.S. (1970): Longshore current generated by obliquely incident sea waves, 1 and 2, J. Geophys. Res., 75 (33), pp. 6779–6801.] produces excessive diffusion of longshore currents into the offshore zone. The generation and decay process of the surface roller is indispensable in the longshore current analysis. The random wave transformation model called PEGBIS (Parabolic Equation with Gradational Breaker Index for Spectral waves) by Goda [Goda, Y. (2004): A 2-D random wave transformation model with gradational breaker index, Coastal Engineering Journal, JSCE and World Scientific, 46 (1), pp. 1–38.] produced good agreement with several laboratory and field data of longshore currents. 相似文献
7.
This paper presents a mathematical model which computes the hydrodynamic characteristics of a curtainwall–pile breakwater (CPB) using circular piles, by modifying the model developed for rectangular piles by Suh et al. [2006. Hydrodynamic characteristics of pile-supported vertical wall breakwaters. Journal of Waterway, Port, Coastal and Ocean Engineering 132(2), 83–96]. To examine the validity of the model, laboratory experiments have been conducted for CPB with various values of draft of curtain wall, spacing between piles, and wave height and period. Comparisons between measurement and prediction show that the mathematical model adequately reproduces most of the important features of the experimental results. The mathematical model based on linear wave theory tends to over-predict the reflection coefficient as the wave height increases. As the draft of the curtain wall increases and the porosity between piles decreases, the reflection and transmission coefficient increases and decreases, respectively, as expected. As the relative water depth increases, however, the effect of porosity disappears because the wave motion is minimal in the lower part of a water column for short waves. 相似文献
8.
9.
The study describes a new fixed-frequency Stokes wave theory that differs from previous Stokes wave theories that fix the wave number. The present wave expansion analytically reveals that the wavelength increases with wave height and exceeds than the wavelength obtained by linear wave theory. A method proposed to comparably transform the wave celerity of Fenton's [Fenton, J.D., 1985. A fifth-order Stokes theory for steady waves. Journal of Waterway, Port, Coastal and Ocean Engineering 111, 216–234.] wave theory to the present one. A direct calculation of the wavelength is introduced for practical solutions, avoiding the need to solve a nonlinear equation using an iterative numerical method. 相似文献
10.
《Coastal Engineering》2006,53(5-6):395-417
This paper is the second part of the work presented by Garcia et al. [Garcia, N., Lara, J.L., Losada, I.J., 2004. 2-D numerical analysis of near-field flow at low-crested breakwaters. Coastal Engineering 51 (10), 991–1020]. In the mentioned paper, flow conditions at low-crested rubble-mound breakwaters under regular wave attack were examined, using a combination of measured data of free surface, bottom pressure and fluid velocities from small-scale experiments and numerical results provided by a VOF-type model (COBRAS) based on the Reynolds-Averaged Navier–Stokes (RANS) equations. This paper demonstrates the capability of the COBRAS model to reproduce irregular wave interaction with submerged permeable breakwaters. Data provided by the numerical model are compared to experimental data of laboratory tests, and the main processes of wave–structure interaction are examined using both experimental and numerical results. The numerical model validation is carried out in two steps. First, the procedure of irregular wave generation is verified to work properly, comparing experimental and numerical data of different cases of irregular wave trains propagating over a flat bottom. Next, the validation of the numerical model for wave interaction with submerged rubble-mound breakwaters is performed through the simulation of small-scale laboratory tests on different incident wave spectra. Results show that the numerical model adequately reproduces the main aspects of the interaction of random waves with submerged porous breakwaters, especially the spectral energy decay at the structure and the spectrum broadening past the structure. The simulations give good results in terms of height envelopes, mean level, spectral shape, root-mean-square height for both free surface displacement and dynamic pressure inside the breakwater. Moreover, large-scale simulations have been conducted, on both regular and irregular incident wave conditions. The overall pattern of the wave interaction with a large-scale submerged breakwater is adequately reproduced by the numerical model. The processes of wave reflection, shoaling and breaking are correctly captured. The good results achieved at a near prototype scale are promising regarding the use of the numerical model for design purposes. 相似文献
11.
The effect of wave age on the wind gust spectrum over wind waves is considered by using the Ochi and Shin [1988. Wind turbulent spectra for design considerations of offshore structures. Proceedings of 20th Offshore Technology Conference, Paper No. 5736, Houston, Texas. pp. 461–467] spectrum together with the wave age dependant Volkov [2001. The dependence on wave age. In: Jones, I.S.F., Toba, Y. (Eds.), Wind Stress Over the Ocean. Cambridge University Press, Cambridge, UK, pp. 206–217] sea surface roughness formula. The wave age independent Charnock [1955. Wind stress on a water surface. Quarterly Journal of Royal Meteorological Society 81, 639–640] sea surface roughness is used as a reference. An example of results demonstrates a clear effect of wave age on the wind gust spectrum. 相似文献
12.
In this paper, performance of solid and perforated Π-type breakwaters was investigated experimentally. Both regular and irregular waves were used during testing. Four depths of immersions were selected for each breakwater and wave type. Different wave groups were generated over these breakwaters, and the transmission, reflection and energy-dissipation characteristics were determined. The results of the experimental study were evaluated and some empirical expressions based on the results were suggested to define the transmission, reflection and energy-dissipation coefficients for different immersion depths of solid and perforated breakwaters under regular and irregular waves. Moreover, performance of solid and perforated Π-type breakwaters were compared with that of solid and perforated U-type breakwaters investigated by Günaydın and Kabdaşlı [2006. Performance of solid and perforated U-type breakwaters under regular and irregular waves. Ocean Engineering 31, 1377–1405]. These comparisons showed that the most reasonable model and wave type are selected to determine requiring performance parameters. 相似文献
13.
14.
Separation of obliquely incident and reflected irregular waves by the Morlet wavelet transform 总被引：1，自引：0，他引：1
An existing 2D time-domain method for separating irregular incident and reflected waves by wavelet transform [Ma et al., 2010. A new method for separation of 2D incident and reflected waves by the Morlet wavelet transform. Coastal Eng., 57(6):597–603] is extended to account for obliquely incident irregular waves propagating over sloping bottoms. The linear shoaling and refraction coefficients are adopted to determine the amplitude and phase changes of waves. The optimal central frequency of the Morlet wavelet is determined by the minimum Shannon wavelet entropy. Numerical tests show that the present method can accurately separate waves over horizontal depths. For waves at sloping bottoms, however, the separation errors increase as bottom slope increases and are significant for waves with incident angle larger than π/3. 相似文献
15.
A numerical model for wave propagation in a harbour is verified by use of physical models.The extended time-dependent mild slope equation is employed as the governing equation,and the model is solved by use of ADI method containing the relaxation factor.Firstly,the reflection coefficient of waves in front of rubble-mound breakwaters under oblique incident waves is determined through physical model tests,and it is regarded as the basis for simulating partial reflection boundaries of the numerical model.Then model tests on refraction,diffraction and reflection of waves in a harbour are performed to measure wave height distribution.Comparative results between physical and numerical model tests show that the present numerical model can satisfactorily simulate the propagation of regular and irregular waves in a harbour with complex topography and boundary conditions. 相似文献
16.
Dag Myrhaug Muk Chen Ong Henrik Føien Cecilie Gjengedal Bernt J. Leira 《Ocean Engineering》2009,36(8):605-616
This paper provides a method by which the scour depth below pipelines and around single vertical piles for combined random waves plus current including effects of second-order wave asymmetry can be derived. Here the empirical formulas proposed by Sumer and Fredsøe [1996. Scour below pipelines in combined waves and current. In: Proceedings of the 15th OMAE Conference, Florence, Italy. Vol. 5, ASME, New York, pp. 595–602] for pipelines, and by Sumer and Fredsøe [2002. The mechanics of scour in the marine environment. World Scientific, Singapore] for vertical piles are used together with Stokes second-order wave theory by assuming the basic harmonic wave motion to be a stationary Gaussian narrow-band random process. Comparisons are made with the Sumer and Fredsøe [1996. Scour below pipelines in combined waves and current. In: Proceedings of the 15th OMAE Conference, Florence, Italy. Vol. 5, ASME, New York, pp. 595–602; 2001. Scour around pile in combined waves and current. Journal of Hydraulic Engineering, 127(5), 403–411] data for linear random waves plus current. An example of calculation is also presented. 相似文献
17.
Theoretical investigations on solitary waves interacting with a surface-piercing concentric porous cylinder system are presented in this paper. The outer cylinder is porous and considered thin in thickness, while the inner cylinder is solid. Both cylinders are rigidly fixed on the bottom. Following Isaacson's [Isaacson, Micheal de St. Q., 1983. Solitary wave diffraction around large cylinder. Journal of the Waterway, Port, Coastal and Ocean Engineering 109(1), 121–127.] approach, we obtained the solutions for free-surface elevation and the corresponding velocity potential in terms of Fourier integrals. Numerical results are presented to show the effects of incident wave condition, porosity of the outer cylinder and radius ratio on wave forces and wave elevations around the inner and outer cylinders. 相似文献
18.
与海床不可渗透的情况相比,波浪在可渗透海床上传播时会发生波能衰减。本文将基于可渗透海床上一维修正型缓坡方程,建立方程求解的有限差分模型。将通过与不可渗透海床上矩形Bragg防波堤对波浪反射系数解析解的对比,验证有限差分模型的正确性和适用性。将进一步研究海床可渗透情况下,海床的渗透性参数、坝体的相对宽度、数量、浸没度对波浪反射系数的影响及其与海床不可渗透情况下的差异。本文研究发现,Bragg共振发生时的反射系数随坝体数量的增多而增大,随海床渗透性参数和坝体浸没度的增大而减小,并且存在一个坝体相对宽度值会使Bragg共振反射达到最大。相较于海床不可渗透的情况,发生Bragg共振反射的波浪频率几乎相同,但反射系数减小,而且零反射（或全透射）现象不再存在。 相似文献
19.
A comparison of the diffraction of multidirectional random waves using several selected wave spectrum models is presented in this paper. Six wave spectrum models, Bretschneider, Pierson–Moskowitz, ISSC, ITTC, Mitsuyasu, and JONSWAP spectrum, are considered. A discrete form for each of the given spectrum models is used to specify the incident wave conditions. Analytical solutions based on both the Fresnel integrals and polynomial approximations of the Fresnel integrals and numerical solutions of a boundary integral approach have been used to obtain the two-dimensional wave diffraction by a semi-infinite breakwater at uniform water depth. The diffraction of random waves is based on the cumulative superposition of linear diffraction solution. The results of predicted random wave diffraction for each of the given spectrum models are compared with those of the published physical model presented by Briggs et al. [1995. Wave diffraction around breakwater. Journal of Waterway, Port, Coastal and Ocean Engineering—ASCE 121(1), 23–35]. Reasonable agreement is obtained in all cases. The effect of the directional spreading function is also examined from the results of the random wave diffraction. Based on these comparisons, the present model for the analysis of various wave spectra is found to be an accurate and efficient tool for predicting the random wave field around a semi-infinite breakwater or inside a harbor of arbitrary geometry in practical applications. 相似文献
20.
Water level variations due to obliquely incident, shoaling and breaking waves on a plane sloping beach were discussed recently by Hsu et al. (Coastal Engineering, 53, 865–877, 2006). An inconsistency in this work with respect to the set-down, and its implications to circulation offshore of the breakpoint, was pointed out by Shi and Kirby (Coastal Engineering, 55, 1246 – 1249, 2008). Here we extend that discussion to include the surfzone momentum balance and wave-induced set-up. We discuss some remaining inconsistencies in the approximation of the surfzone momentum balance, derive and present a consistent approximation, and validate the new approximation through numerical comparison to a more exact model. 相似文献