首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
This paper attempts to characterize the coals of Satpura Gondwana basin using a large number of pillar coal samples drawn from the working coal mines of Pench, Kanhan, and Tawa (Pathakhera) Valley Coalfields of this basin. This westernmost Gondwana basin of Peninsular India is graben/half-graben type and occupies an area of 12 000 km2 with sedimentary fills (>5000 m) ranging in age from Permian to Cretaceous. The Barakar Formation (Permian) is exclusively coal-bearing with a total coal reserve of nearly 2000 Mt. The results show that the coals of this basin are equally rich in inertinite (22.8–58.7%, 24.5–62.0% mmf basis) and vitrinite (24.4–52.4%, 24.4–56.0% mmf basis). The concentration of liptinite ranges from 8.8% to 23.2% (9.0–26.0% mmf basis). The dominant microlithotypes of these coals are inertite and vitrite with comparatively low concentrations of vitrinertite and clarite. The vitrinite reflectance (Rom% values) suggests that the Pench Valley (0.30–0.58%) coals are subbituminous C to high volatile C bituminous in rank, while the Kanhan and Tawa Valley coals (0.52–0.92%) are subbituminous A to high volatile A bituminous in rank. The localized enhancement of rank in the latter two basins has been attributed to the extraneous heat flow from deep-seated igneous intrusions in the basin. The microlithotype composition of these coals is suggestive of their evolution in limno-telmatic zones, under fluvio-lacustrine control with the development of upper deltaic and lower deltaic conditions near the fresh water lacustrines. The floral input is characteristic of forest swamps with intermittent floods, leading to the development of reed moor and open moor facies, particularly in the Pench Valley basin. The Gelification Index (GI) and Tissue Preservation Index (TPI) are suggestive of terrestrial origin with high tree density. Further, moderately high GI and exceedingly high telovitrinite based TPI along with high ash content, particularly for the coals of Kanhan and Tawa Valley Coalfields, are indicative of the recurrence of drier conditions in the forested swamps. Furthermore, lateral variation in TPI values is indicative of increase in the rate of subsidence vis-à-vis depth of the basin from east to west (Pench to Tawa Valley Coalfield). The Ground Water Index (GWI) suggests that these coals have evolved in mires under ombotrophic to mesotrophic hydrological conditions. The Vegetation Index (VI) values are indicative of the dominance of herbaceous plants in the formation of Pench Valley coals and comparatively better forest input in the formation of Kanhan and Tawa Valley coals.  相似文献   

2.
Floral character in mires has changed progressively through time. In the Carboniferous, pteridophytes, sphenophytes and lycophytes were dominant but by the Permian gymnosperms were an important component of mire flora. During the early Mesozoic gymnosperms remained the characteristic mire vegetation, together with pteridophytes, and conifers became dominant during the Jurassic. Cretaceous and Paleocene vegetation are similar, with taxodiaceous flora being important in mire vegetation. From the Eocene onwards, however, angiosperms were increasingly dominant in mire communities and in the Miocene herbaceous vegetation began to play a significant role. Together with these changes in floral character at least three aspects of coal character also appear to vary sequentially with time and are distinctive in the Tertiary: (1) proportions and thickness of vitrain banding, (2) coal bed thickness and (3) proportions of carbonised material. A compilation has been made of data from the coal literature comparing older coals with those of the Tertiary, in order to give a perspective in which to examine Tertiary coals. It was found that only Tertiary coals contain significant proportions of coal devoid of vitrain bands. In addition, Tertiary coals are the thickest recorded coal beds and generally contain low percentages of carbonised material (many less than 5%) as compared to older coals. It is interesting to note that Paleocene coal beds are similar to Cretaceous coals in that they tend to be thinner and contain higher proportions of carbonised material than do younger Tertiary coals.The absence of vitrain bands in some Tertiary coal beds is thought to result from the floras dominated by angiosperms, which are relatively easily degraded as compared to gymnosperms. The thickness of Tertiary coals may be related to an increase in biomass production from the Carboniferous through to the Tertiary, as plants made less investment in producing lignin, an energy-intensive process. In addition, with less lignin in plants, easier degradation of biomass may have facilitated nutrient recycling which, in turn, led to greater biomass production. Increased biomass production may have also ‘diluted’ the carbonised material present in some Tertiary peats, leading to lower proportions in the coal. Another possible cause of decreased carbonised components in Tertiary coal is that decreasing lignin content resulted in decreased charring during fires, as lignin is particularly prone to charring. A third possibility is that the carbonised component of peat may be concentrated during coalification so that Tertiary coals, generally of lower rank than Mesozoic or Paleozoic coals, contain a smaller fraction of carbonised plant material. It is not at present clear which of these mechanisms may have affected carbonised material in peat and coal but it is clear that lignin type and content has had an important role in determining peat and coal character since the Paleozoic.  相似文献   

3.
The Carboniferous succession in the Donets Basin hosts about 130 seams, each with a thickness over 0.45 m. Nine economically important seams from the (south)western Donets Basin are studied using organic petrographical, inorganic geochemical, and organic geochemical techniques. The main aim of the study is the reconstruction of peat facies of Serpukhovian (Mississippian) and Moscovian (Middle Pennsylvanian) coals.Formation of major coal seams commenced during Serpukhovian times. Early Serpukhovian coal accumulated in a relatively narrow shore-zone and is rich in inertinite and liptinite. Very low ash yields, low to moderate sulphur contents, and upward increasing inertinite contents suggest coal deposition in raised mires.Moscovian coal has a significantly wider lateral extension and is generally rich in vitrinite. Coal properties vary widely in response to different peat facies. Low-sulphur, low-ash k7 coal was formed in a raised mire or in a low-lying mire without detrital input. l1 and l3 seams containing several fluvial partings were formed in low-lying mires. Both seams are more than 2 m thick. Seams m2 and m3 contain high-sulphur coal, a consequence of deposition in a peat with marine influence. In contrast, syngenetic sulphur content is low in the m51 upper seam, which was formed in a lacustrine setting. The late Moscovian n1 seam, up to 2.4 m thick, accumulated in a swamp with a vegetation rich in bryophytes and pteridophytes. The properties of the n1 seam are transitional between those of Serpukhovian and other Moscovian seams. Differences in maceral composition between Serpukhovian and Moscovian coals probably reflect changes in climate and vegetation type.Tuff layers are observed in the l1, l3, and m3 seams. The l3 and m3 seams contain abundant authigenic quartz. Trace element contents are high in many seams. As contents are especially high in seams c102, k7, l3 and m3. Ash in the l3 seam contains up to 8000 ppm As. Co is enriched near the base of several seams. Maxima up to 2400 ppm occur in the ash of the k7 and l3 seams. Cd contents in ash are frequently as high as 30 or 40 ppm.  相似文献   

4.
The effect of petrographic composition on the methane sorption capacity has been determined for a suite of coals and organic-rich shales. Subbituminous and bituminous coals were separated into bright and dull lithotypes by hand-picking. The methane sorption capacities range between 0.5 and 23.9 cm3/g at a pressure of 6 MPa. The low volatile bituminous Canmore coal and the anthracite sample have the highest capacities with the “natural coke” having the lowest. For low-rank coals there is no significant difference between bright and dull samples except for one coal with the dull sample having a greater sorption capacity than its bright equivalent. For higher-rank coals, the bright samples have a greater methane capacity than the dull samples and the difference between sample pairs increases with rank. The boghead coal samples have the highest sorption capacities in the liptinite-rich coals suite and are higher than subbituminous to medium volatile bituminous samples. Pore size distribution indicates that methane is held as solution gas in liptinite-rich coals and by physical sorption in micropores in liptinite-poor coals. These contrasting processes illustrate that liptinite-rich samples need to be independently assessed. The positive relationship between reactive inertinite content and methane sorption capacity occurs within the subbituminous to medium volatile bituminous coals because the reactive inertinite is structurally similar to vitrinite and have a higher microporosity than non-reactive inertinite. Reactivity of inertinite should be assessed in CBM studies of dull coals to provide a better understanding of petrographic composition effects on methane capacity.  相似文献   

5.
In the Leão-Butiá Coalfield, Rio Grande do Sul the coal seams occur in the Rio Bonito Formation, Guatá Group, Tubarão Supergroup of the Paraná Basin, Brazil and are of Permian (Artinskian–Kungurian) age.This study is the first detailed investigation on the coal petrographic characterization of the coal-bearing sequence in relation to the depositional settings of the precursor mires, both in terms of whole seam characterization and in-seam variations. The study is based on the analyses of nine coal seams (I2, CI, L4, L3, L2, L1, S3, S2, S1), which were selected from core of borehole D-193, Leão-Butiá and represent the entire coal-bearing sequence.The interpretation of coal facies and depositional environment is based on lithotype, maceral and microlithotype analyses using different facies-critical petrographic indices, which were displayed in coal facies diagrams. The seams are characterized by the predominance of dull lithotypes (dull, banded dull). The dullness of the coal is attributed to relatively high mineral matter, inertinite and liptinite contents. The petrographic composition is dominated by vitrinite (28–70 vol.% mmf) and inertinite (> 30 vol.% mmf) groups. Liptinite contents range from 7 to 30 vol.% (mmf) and mineral matter from 4–30 vol.%. Microlithotypes associations are dominated by vitrite, duroclarite, carbominerite and inertite. It is suggested that the observed vertical variations in petrographic characteristics (lithotypes, microlithotypes, macerals, vitrinite reflectance) were controlled by groundwater level fluctuations in the ancient mires due to different accommodation/peat accumulation rates.Correlation of the borehole strata with the general sequence-stratigraphical setting suggests that the alluvial fan system and the coal-bearing mudstone succession are linked to a late transgressive systems tract of sequence 2. Based on average compositional values obtained from coal facies diagrams, a deposition in a limno-telmatic to limnic coal facies is suggested.  相似文献   

6.
In order to get detailed information about the facies and genesis of Upper Carboniferous coal seams of Northwest Germany, maceral analyses of complete seam profiles (Westphalian B-D, mainly Westphalian C) were carried out. Four main facies and twelve subfacies could be distinguished. The main facies are:
1. (1) The sapropelic-coal facies, consisting of fine-grained inertinite and liptinite, which forms from organic sediments deposited at the bottom of moor lakes.
2. (2) The densosporinite facies which is high in inertinite and liptinite and low in vitrinite. Syngenetic pyrites, clastic layers, thick vitrains and fusains do not occur. This facies originates from peats of ‘open mires’ with higher groundwater table and herbaceous vegetation. The ‘open mire’ was situated in the centre of extensive swamps. Consequently, clastic sedimentation did not affect this swamp type and nutrient supply and pH values were low.
3. (3) The vitrinite-fusinite facies, which is high in vitrinite. This is the result of abundant vitrains. Under the microscope, fusains were mostly identified as fusinite. The vitrinite-fusinite facies originates from a forest mire. More or less abundant seam splits and clastic layers show that rivers flowed in the neighbourhood of this area.
4. (4) The shaly-coal facies, which represents the most marginal part of the former swamp frequently affected by clastic sedimentation.
Within the Carboniferous of the Ruhr Region it seems unlikely that the thin coal seams of the Namurian C and Westphalian A1 contain a densosporinite facies. The swamps were situated in the lower delta plain where they were often affected by marine influences. Consequently, coals are high in minerals and sulfur and they are thin and discontinous. The best conditions for the formation of extensive swamps, with open mires (densosporinite facies) in their central parts, prevailed during Westphalian A2 and B1 times. Low contents of sulfur and minerals and high content of inertinite are typical for these coals. Sedimentation mainly took place in the transitional zone from the lower to the upper delta plain. During the Westphalian B2 and C fluvial sedimentation dominated. Within the coal seams minerals, sulfur and pseudovitrinite increase while inertinite decreases. This is the consequence of coal of the densosporinite facies occurring with increased rarity. The coal seams of the Westphalian C2 contain no densosporinite facies because peat formation was restricted by increasing fluvial sedimentation and by a better drainage. As a consequence, extensive swamps with ‘open mires’ in the centre were no longer formed after the formation of the “Odin” seams. Above the “Odin” seams coal of the vitrinite-fusinite facies contains thick-walled torisporinites. Variations and lowering of the groundwater table caused mild oxidative influences during peat formation. This is documented by an increase in pseudovitrinite, the occurrence of torisporinites and the absence of spheroidal sideritic concretions. Sulfur content increases in the absence of the low-ash and low-sulfur coal of the densosporinite facies.In Upper Carboniferous coal seams of the Ibbenbüren Region the inertinite and telocollinite contents are higher than in those of the Ruhr Region. Therefore, variations of the groundwater table have been more pronounced and resulting oxidative influences must have been more severe. Seldom occurring marine and brackish horizons and a higher fusinite (fusain) content indicate a slight elevation of this area. From Early Westphalian D times onward, peat formation was no longer possible because of the better drainage. This resulted in severe oxidative conditions which excluded peat formation.  相似文献   

7.
The Buller Coalfield on the West Coast of the South Island, New Zealand, contains the Eocene Brunner Coal Measures. The coal measures unconformably overlie Paleozoic-Cretaceous basement rocks and are conformably overlain by, and laterally interfinger with, the Eocene marine Kaiata Formation. This study examines the lithofacies frameworks of the coal measures in order to interpret their depositional environments. The lower part of the coal measures is dominated by conglomeratic lithofacies that rest on a basal erosional surface and thicken in paleovalleys incised into an undulating peneplain surface. These lithofacies are overlain by sandstone, mudstone and organic-rich lithofacies of the upper part of the coal measures. The main coal seam of the organic-rich lithofacies is thick (10–20 m), extensive, locally split, and locally absent. This seam and associated coal seams in the Buller Coalfield are of low- to high-volatile bituminous rank (vitrinite reflectance between 0.65% and 1.75%). The main seam contains a variable percentage of ash and sulphur. These values are related to the thickening and areal distribution of the seam, which in turn, were controlled by the nature of clastic deposition and peat-forming mire systems, marine transgression and local tidal incursion. The conglomeratic lithofacies represent deposits of trunk and tributary braided streams that rapidly aggraded incised paleovalleys during sea-level stillstands. The main seam represents a deposit of raised mires that initially developed as topogenous mires on abandoned margins of inactive braidbelts. Peat accumulated in mires as a response to a rise in the water table, probably initially due to gradual sea-level rise and climate, and the resulting raised topography served as protection from floods.The upper part of the coal measures consists of sandstone lithofacies of fluvial origin and bioturbated sandstone, mudstone and organic-rich lithofacies, which represent deposits of paralic (deltaic, barrier shoreface, tidal and mire) and marine environments. The fluvial sandstone lithofacies accumulated in channels during a sea-level stillstand. The channels were infilled by coeval braided and meandering streams prior to transgression. Continued transgression, ranging from tidal channel-estuarine incursions to widespread but uneven paleoshoreline encroachment, accompanied by moderate basin subsidence, is marked by a stacked, back-stepping geometry of bioturbated sandstone and marine mudstone lithofacies. Final retrogradation (sea-level highstand) is marked by backfilling of estuaries and by rapid landward deposition of the marine Kaiata Formation in the late Eocene.  相似文献   

8.
A petrological, organic geochemical and geochemical study was performed on coal samples from the Soko Mine, Soko Banja basin, Serbia. Ten coal and two carbonaceous clay samples were collected from fresh, working faces in the underground brown coal mine from different parts of the main coal seam. The Lower Miocene, low-rank coal of the Soko Mine is a typical humic coal with huminite concentrations of up to 76.2 vol.%, liptinite less than 14 vol.% and inertinite less than 11 vol.%. Ulminite is the most abundant maceral with variable amounts of densinite and clay minerals. Sporinite and resinite are the most common macerals of the liptinite group. Inertodetrinite is the most abundant maceral of the inertinite group. The mineral-bituminous groundmass identified in some coal samples, and carbonaceous marly clay, indicate sub-aquatic origin and strong bacterial decomposition. The mean random huminite reflectance (ulminite B) for the main coal seam is 0.40 ± 0.05% Rr, which is typical for an immature to early mature stage of organic matter.The extract yields from the coal of the Soko Banja basin ranges from 9413 to 14,096 ppm, in which alkanes constituted 1.0–20.1%, aromatics 1.3–14.7%, asphaltenes 28.1–76.2% and resins 20.2–43.5%. The saturated hydrocarbon fractions included n-C15 to n-C32, with an odd carbon number that predominate in almost all the samples. The contents of n-C27 and n-C29 alkanes are extremely high in some samples, as a contribution of epicuticular waxes from higher plants. Acyclic isoprenoid hydrocarbons are minor constituents in the aliphatic fraction, and the pristane/phytane (Pr/Ph) ratio varies between 0.56 and 3.13, which implies anaerobic to oxic conditions during sedimentation. The most abundant diterpanes were abietane, dehydroabietane and 16α(H)-phyllocladane. In samples from the upper part of the coal seam, diterpanes are the dominant constituents of the alkane fraction. Polycyclic alkanes of the triterpane type are important constituents of alkane fractions. The occurrence of ββ- and αβ-type hopanes from C27 to C31, but without C28, is typical for the Soko Banja coals.The major and trace elements in the coal were analysed using X-ray fluorescence (XRF), and inductively coupled plasma-mass spectrometry (ICP-MS). In comparison with world lignites, using the geometric mean value, the coal from the Soko Banja Basin has a high content of strontium (306.953 mg/kg). Higher values than the world lignites were obtained for Mo (3.614 mg/kg), Ni (8.119 mg/kg), Se (0.884 mg/kg), U (2.642 mg/kg) and W (0.148 mg/kg). Correlation analysis shows inorganic affinity for almost all the major and trace elements, except for S, which has an organic affinity.  相似文献   

9.
Low rank coals from two disparate geological settings have been subjected to petrographic and palynological analysis. The stratigraphic units studied and their locations are the Amphitheatre Formation, St Elias Mountains, Yukon Territory, of Eocene to Oligocene age; and the base of the Ravenscrag Formation, south-central Saskatchewan, of latest Cretaceous to earliest Paleocene age.The depositional setting of the Amphitheatre Formation ranges from distal sand-dominated braided stream and lacustrine environments to proximal gravel-dominated fluvial environments. The coals are low in inertinite (< 6%) and mostly high in huminite (> 85%). In localities with a dominance of angiosperm pollen the relative abundance of eu-ulminite B and densinite is greatest whereas in the ones with a dominantly coniferous pollen assemblage eu-ulminite A is the most prominent maceral. These observations suggest as an immediate cause/effect relationship, an at least partial dependance of present maceral content on floral precursors. This in turn probably reflects a certain combination of depositional environment conditions (pH, Eh, temperature, etc.), that likely controlled the plant community and the preservation of vegetal matter.The depositional environment of coals from the basal part of the Ravenscrag Formation contrasts sharply with that of the Amphitheatre. The Ravenscrag coals formed within a low energy, stable, floodplain environment. Palynological and coal maceral profiles for the basal Ravenscrag Formation coal, which spans the Cretaceous-Tertiary boundary, indicates that the environment of deposition progressed from an open canopied swamp forest with areas of open water, through a phase of low-lying to open water swamps with herbaceous, pterophytic vegetation to, at least locally, raised bogs. The change in coal petrography across the Cretaceous-Tertiary boundary is shown to be relatively minor in comparison to subsequent changes in coal petrography in the earliest Paleocene and to changes that occur in the palynological assemblages across the boundary interval.  相似文献   

10.
Boehmite-rich coal of Pennsylvanian age was discovered earlier at the Heidaigou Surface Mine, Jungar Coalfield, Inner Mongolia, China. This paper reports new results on 29 bench samples of the no. 6 coal from a drill core from the adjacent Haerwusu Surface Mine, and provides new insights into the origin of the minerals and elements present. The results show that the proportion of inertinite in the no. 6 coal is higher than in other Late Paleozoic coals in northern China. Based on mineral proportions (boehmite to kaolinite ratio) and major element concentrations in the coal benches of the drill core, the no. 6 coal may be divided into five sections (I to V). Major minerals in Sections I and V are kaolinite. Sections II and IV are mainly kaolinite with a trace of boehmite, and Section III is high in boehmite. The boehmite is derived from bauxite in the weathered surface (Benxi Formation) in the sediment-source region. The no. 6 coal is rich in Al2O3 (8.89%), TiO2 (0.47%), Li (116 μg/g), F (286 μg/g), Ga (18 μg/g), Se (6.1 μg/g), Sr (350 μg/g), Zr (268 μg/g), REEs (172 μg/g), Pb (30 μg/g), and Th (17 μg/g). The elements are classified into five associations by cluster analysis, i.e. Groups A, B, C, D, and E. Group A (ash–SiO2–Al2O3–Na2O–Li) and Group B (REE–Sc–In–Y–K2O–Rb–Zr–Hf–Cs–U–P2O5–Sr–Ba–Ge) are strongly correlated with ash yield and mainly have an inorganic affinity. The elements that are negatively or less strongly correlated with ash yield (with exceptions of Fe2O3, Be, V, and Ni) are grouped in the remaining three associations: Group C, Se–Pb–Hg–Th–TiO2–Bi–Nb–Ta–Cd–Sn; Group D, Co–Mo–Tl–Be–Ni–Sb–MgO–Re–Ga–W–Zn–V–Cr–F–Cu; and Group E, S–As–CaO–MnO–Fe2O3. Aluminum is mainly distributed in boehmite, followed by kaolinite. The high correlation coefficients of the Li–ash, Li–Al2O3, and Li–SiO2 pairs indicate that Li is related to the aluminosilicates in the coal. The boehmite-rich coal is high in gallium and F, which occur in boehmite and the organic matter. Selenium and Pb are mainly in epigenetic clausthalite fillings in fractures. The abundant rare earth elements in the coal benches were supplied from two sources: the bauxite on the weathered surface of the Benxi Formation and from adjacent partings by groundwater leaching during diagenesis. The light rare earth elements (LREEs) are more easily leached from the partings and incorporated into the organic matter than the heavy REEs, leading to a higher ratio of LREEs to HREEs in the coal benches than in the overlying partings.  相似文献   

11.
The Obed-Marsh coal deposit is of Late Paleocene age, and contains over 200 million tons of subbituminous-B to high-volatile bituminous-C coal.Petrographic analysis of three sections from seams 1 and 2 reveals high amounts of huminite and relatively low amounts of liptinite and inertinite, with the exception of some intervals in both seems. The persistent high ratio of huminite to liptinite and inertinite indicates a relatively reducing environment, a feature also expressed by the relatively low inertinite content. Examination of the in-seam profiles also indicates undisturbed peat accumulation over long periods of time.The Obed coals, similar in rank and composition to the Hat Creek coals of British Columbia, formed in a freshwater environment and can be used as feedstock for combustion/gasification. Furthermore, the intervals rich in liptinite and petroleum-like substances may be utilized for liquefaction (hydrogenation).  相似文献   

12.
One hundred twenty-two samples of Jurassic and Paleogene brown coals and 1254 peat samples from the south-eastern region of the Western-Siberian platform were analyzed for gold by the neutron-activation method. Mean content of Au in Jurassic coals is 30 ± 8 ppb, in Paleogene coals is 10.6 ± 4.8 ppb, and in peat is 6 ± 1.4 ppb. Concentrations of gold as high as 4.4 ppm were found in coal ash and 0.48 ppm in the peat ash. Coal beds with anomalous gold contents were found at Western-Siberian platform for the first time.Negative correlation between gold and ash yield in coals and peat and highest gold concentrations were found in low-ash and ultra-low-ash coals and peat. Primarily this is due to gold's association with organic matter.For the investigation of mode of occurrence of Au in peat the bitumen, water-soluble and high-hydrolyzed substances, humic acids, cellulose and lignin were extracted from it. It was determined that in peat about 95% of gold is combined with organic matter. Forty to sixty percent of Au is contained in humic acids and the same content is in lignin. Bitumens, water-soluble and high-hydrolyzed substances contain no more than 1% of general gold quantity in peat.The conditions of accumulation of high gold concentrations were considered. The authors suggest that Au accumulation in peat and brown coals and the connection between anomalous gold concentrations and organic matter in low-ash coals and peat can explain a biogenic–sorption mechanism of Au accumulation. The sources of formation of Au high concentration were various Au–Sb, Au–Ag Au–As–Sb deposits that are abundant in the Southern and South-Eastern peripheries of the coal basin.  相似文献   

13.
Peat mires retain a sensitive record of water‐table (base‐level) fluctuations throughout their accumulation. On this basis, coals provide one of the best opportunities to interpret high‐resolution base‐level change in ancient non‐marine deposits. The petrographic composition of 275 samples collected from 11 localities along a 100 km south‐west to north‐east transect across the regionally extensive (>37 000 km2) Pennsylvanian (Upper Carboniferous) Fire Clay coal of the Central Appalachian Basin, USA was analysed to determine its internal stratigraphy. The coal is positioned within the late lowstand/early transgressive systems tract of a fourth‐order depositional sequence. The results of the petrographic analyses reveal a cyclicity in the composition of the Fire Clay coal, which defines six units that are correlated over more than 100 km. Each coal cycle is characterized by a gradual upward transition from vitrinite‐dominated to inertinite‐dominated coal, which represents a ‘drying‐up’ succession. Increased concentrations of resistant peat components at the top of the drying‐up successions indicate reduced peat accumulation rates associated with slowing rate of water‐table rise, and may represent a residue of peat remaining from a phase of exposure and erosion resulting from a falling water table. These drying‐up successions are bound by surfaces that display an abrupt coal facies shift from inertinite‐rich to vitrinite‐rich coal, representing a rapid water‐table rise. Each cycle represents markedly different mire conditions with different aerial distributions, which supports the notion of temporal disconnection between each unit of coal, and suggests that considerable time may be ‘locked‐up’ in unit bounding exposure surfaces. Recognition that the rate of peat accumulation in a mire may vary considerably through time, has important implications for studies which assume that peat and coal successions provide continuous and time‐invariant records of base‐level fluctuations or palaeoecological change.  相似文献   

14.
Megascopic, micropetrographic and scanning-electron microscopic investigations of fibrous coal indicate that paleo-wildfires were common occurrences in the mire which produced Highvale coals. At least 20 fibrous coal (fusain) horizons have been identified in corehole samples from the pit no. 3 locality at Highvale, in the central Alberta Plains. Thicknesses of individual horizons vary, and are not particular to any stratigraphic position within coal seams. The majority of these fibrous horizons is within the two thick economic seams, the Highvale Nos. 1 and 2, which are characteristically megascopically dull. The dullness of given lithotypes is largely related to inertinite content with fibrous coal containing 51% inertinite on average, and selected horizons comprised of as much as 85% inertinite. Semifusinite and inertodetrinite are the predominant inertinites, with a few horizons exhibiting highly reflecting fusinite. Macrinite is rare, and micrinite is absent. SEM investigations reveal that certain fibrous coals exhibit excellent preservation of the original gymnospermous (Taxodium) woody tissue. Features such as homogenization and swelling of the cell walls, elimination of the middle lamellae, and preservation of bordered pits are clearly indicative of charcoal formation as a product of paleo-wildfires. Depending upon the nature of the fire, temperatures obtained and the nature of the mire vegetation, a wide range of inertinite precursors can be produced.  相似文献   

15.
The South Sumatra basin is among the most important coal producing basins in Indonesia. Results of an organic petrography study on coals from Tanjung Enim, South Sumatra Basin are reported. The studied low rank coals have a mean random huminite reflectance between 0.35% and 0.46% and are dominated by huminite (34.6–94.6 vol.%). Less abundant are liptinite (4.0–61.4 vol.%) and inertinite (0.2–43.9 vol.%). Minerals are found only in small amounts (0–2 vol.%); mostly as iron sulfide.Based on maceral assemblages, the coals can be grouped into five classes: (1) humotelinite-rich group, (2) humodetrinite-rich group, (3) humocollinite-rich group, (4) inertinite-rich group and (5) humodetrinite–liptinite-rich group. Comparing the distribution of maceral assemblages to the maceral or pre-maceral assemblages in modern tropical domed peat in Indonesia reveals many similarities. The basal section of the studied coal seams is represented typically by the humodetrinite–liptinite-rich group. This section might be derived from sapric or fine hemic peat often occurring at the base of modern peats. The middle section of the seams is characterized by humotelinite-rich and humocollinite-rich groups. The precursors of these groups were hemic and fine hemic peats. The top section of the coal seams is typically represented by the humodetrinite-rich or inertinite-rich group. These groups are the counterparts of fibric peat at the top of the modern peats. The sequence of maceral assemblages thus represents the change of topogenous to ombrogenous peat and the development of a raised peat bog.A comparison between the result of detailed maceral assemblage analysis and the paleodepositional environment as established from coal maceral ratio calculation indicates that the use of coal maceral ratio diagrams developed for other coal deposits fails to deduce paleo-peat development for these young tropical coals. In particular, mineral distribution and composition should not be neglected in coal facies interpretations.  相似文献   

16.
鄂尔多斯盆地煤的灰分和硫、磷、氯含量研究   总被引：3，自引：0，他引：3  
详细阐述了鄂尔多斯盆地煤的灰分产率和硫、磷及氯含量的空间及垂向分布规律,并探讨了煤中硫。磷及氯含量的影响因素。研究结果表明,石炭-二叠纪煤以中灰煤为主,部分为高灰煤;低灰煤仅分布在局部地区,且灰分产率与全流呈负相关;延安组以特低灰—低灰煤为主,中灰煤次之,空间上灰分北高南低、东高西低;太原组以中高硫煤为主,山西组则以低硫煤为特征,空间上呈南高北低、西高车低之趋势;延安组亦以低硫煤为主。煤中形态硫以黄铁矿硫为主,有机硫次之,硫酸盐硫极少。从太原组到山西组再到延安组,煤中硫呈递减趋势,这与聚煤环境的变化密切相关。该盆地煤含磷低,少部分为特低磷煤。煤中氯的质量分数值平均为425．8×10-6,空间上中南部高、北西部低;垂向上,下部煤层中氯的含量高于中上部煤层,这可能与煤中氯的成因有关。  相似文献   

17.
More than 3800 coal thickness measurements, proximate analyses from 97 localities, and stratigraphic and sedimentological analyses from more than 300 outcrops and cores were used in conjunction with previously reported palynological and petrographic studies to map individual benches of the coal and document bench-scale variability in the Fire Clay (Hazard No. 4) coal bed across a 1860 km2 area of the Eastern Kentucky Coal Field. The bench architecture of the Fire Clay coal bed consists of uncommon leader benches, a persistent but variable lower bench, a widespread, and generally thick upper bench, and local, variable rider benches. Rheotrophic conditions are inferred for the leader benches and lower bench based on sedimentological associations, mixed palynomorph assemblages, locally common cannel coal layers, and generally high ash yields. The lower bench consistently exhibits vertical variability in petrography and palynology that reflects changing trophic conditions as topographic depressions infilled. Infilling also led to unconfined flooding and ultimately the drowning of the lower bench mire. The drowned mire was covered by an air-fall volcanic-ash deposit, which produced the characteristic flint clay parting. The extent and uniform thickness of the parting suggests that the ash layer was deposited in water on a relatively flat surface without a thick canopy or extensive standing vegetation across most of the study area. Ash deposits led to regional ponding and establishment of a second planar mire. Because the topography had become a broadly uniform, nutrient-rich surface, upper-bench peats became widespread with large areas of the mire distant to clastic sources. Vertical sections of thick (>70 cm), low-ash yield, upper coal bench show a common palynomorph change from arborescent lycopod dominance upward to fern and densospore-producing, small lycopod dominance, inferred as a shift from planar to ombrotrophic mire phases. Domed mires appear to have been surrounded by wide areas of planar mires, where the coal was thinner (<70 cm), higher in ash yield, and dominated by arborescent lycopods. Rectangular thickness trends suggest that syndepositional faulting influenced peat accumulation, and possibly the position of the domed mire phase. Faulting also influenced post-depositional clastic environments of deposition, resulting in sandstone channels with angular changes in orientation. Channnels and lateral facies were locally draped by high-ash-yield rider coal benches, which sometimes merged with the upper coal bench. These arborescent-lycopod dominant rider coal benches were profoundly controlled by paleotopography, much like the leader coal benches. Each of the benches of coal documented here represent distinctly different mires that came together to form the Fire Clay coal bed, rather than a single mire periodically split by clastic influx. This is significant as each bench of the coal has its own characteristics, which contribute to the total coal characteristics. The large data set allows interpretation of both vertical and lateral limits to postulated domed phases in the upper coal bench, and to the delineation of subtle tectonic structures that allow for meaningful thickness projections beyond the limits of present mining.  相似文献   

18.
Forty-two bench samples of the Sewickley coal bed were collected from seven localities in the northern Appalachian Basin and analyzed palynologically, petrographically, and geochemically. The Sewickley coal bed occurs in the middle of the Pittsburgh Formation (Monongahela Group) and is of Late Pennsylvanian age. Palynologically, it is dominated by spores of tree ferns. Tree fern spore taxa in the Sewickley include Punctatisporites minutus, Punctatosporites minutus, Laevigatosporites minimus, Spinosporites exiguus, Apiculatasporites saetiger, and Thymospora spp. In fact, Punctatisporites minutus was so abundant that it had to be removed from the standard counts and recorded separately (average 73.2%). Even when Punctatisporites minutus is removed from the counts, tree fern spores still dominate a majority of the assemblages, averaging 64.4%. Among the tree fern spores identified in the Sewickley coal, Thymospora exhibits temporal and spatial abundance variation. Thymospora usually increases in abundance from the base to the top of the bed. Thymospora is also more abundant in columns that are thick (>100 cm) and low in ash yield (<12.0%, dry basis). Calamite spores (e.g. Calamospora spp., Laevigatosporites minor, and L. vulgaris) are the next most abundant plant group represented in the Sewickley coal, averaging 20%. Contributions from all other plant groups are minor in comparison.Petrographically, the Sewickley coal contains high percentages of vitrinite (average 82.3%, mineral matter-free (mmf)), with structured forms being more common than unstructured forms. In contrast, liptinite and inertinite macerals both occur in low percentages (average 7.7% and 10.0%, respectively). Geochemically, the Sewickley coal has a moderate ash yield (average 12.4%) and high total sulfur content (average 3.4%).Four localities contained a high ash or carbonaceous shale bench. These benches, which may be coeval, are strongly dominated by tree fern spores. Unlike the lower ash benches, they contain low percentages of vitrinite, which mainly occurs as unstructured vitrinite, and higher liptinite and inertinite contents.The accumulated data suggest that the Sewickley paleomire was probably a rheotrophic, planar mire that had a consistent water cover. This is supported by the high vitrinite contents, moderate ash yields, and high total sulfur contents. The high ash and carbonaceous shale benches probably represent either periods of dryness and substrate exposure, or flooding of the mire surface, the duration of which is unknown.  相似文献   

19.
Chars produced by the combustion of a set of three coals from Alberta, Canada, were classified morphologically using reflected light microscopy. Produced chars are different in morphological features, pore thickness, anisotropy and degree of reactivity, because of differences in the vitrinite and inertinite contents.The subbituminous A coal produced the highest percentage of unreactive or slightly reactive components due to its high inertinite content (20.0%), followed by isotropic cenospheres. Isotropic cenospheres, both thin- and thick-walled, and exploded cenospheres are the characteristic chars produced by the high-voltile bituminous B coal, whereas the low-volatile bituminous coking coal produced cenospheres with granular anisotropy (mosaic) on the walls and abundant coke fragmentsOptical microscopy is useful in differentiating the performance of a series of coals during combustion based on petrographic composition and rank and can aid in understanding the relationship between ‘reactive’ and ‘non-reactive’ coal macerals to burnout performance.  相似文献   

20.
Pakistan is rich in coal resources, which amount to around 186 billion tons. The Paleocene Padhrar and Darra Adam Khel coalfields are located in the Central Salt Range Punjab Province and the Khyber Pakhtunkhwa Province, Pakistan, respectively. Padhrar coal has not been studied in detail and the Darra Adam Khel coalfields are newly-discovered, so no research has been done, due to security considerations. In this study, an attempt has been made to study the geochemical and mineralogical characteristics of the Padhrar and Darra Adam Khel coals, in order to learn about the coal quality, element enrichment mechanism, sedimentary medium conditions and potentially valuable elements for coal utilization. The Padhrar and Darra Adam Khel coals are low to medium ash, low moisture content, high in volatiles and high total sulfur coal. The vitrinite reflectance in Darra Adam Khel coal is higher than in Padhrar coal, indicating either a greater burial depth or the effects of Himalayan tectonism. The vitrinite content is dominant in the Padhrar and Darra Adam Khel coals, followed by inertinite and liptinite, the major minerals including quartz, clay minerals, calcite and pyrite. The trace elements Ni, As, Be Zn, Ge, Mo, Ta, W, Co and Nb, Sn, Hf, Ta, Pb, Th, Cd, In, Be, V, Cr, Zr, Ag, Li, W and Co are concentrated in some of the Padhrar and Darra Adam Khel coal samples, respectively. The Padhrar coal shows positive Ce, Eu and Gd anomalies, with most of the Darra Adam Khel coal showing negative Ce, Eu and positive Gd anomalies with high LREE. The Al2O3/TiO2 values indicate that the sediment source of the Padhrar and Darra Adam Khel coals is mostly related to intermediate igneous rocks. The Sr/Ba, SiO2 + Al2O3, Fe2O3 + CaO + MgO/SiO2 + Al2O3 and high sulfur content in the Padhrar and Darra Adam Khel coals indicate epithermal and marine water influence with a tidal flat, coal-forming environment and a deltaic coal-forming environment, respectively.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号