共查询到18条相似文献，搜索用时 218 毫秒
1.
2.
在大震或特大震下,黏滞阻尼器可能因某个极限状态的出现而发生破坏。现有在斜拉桥上设置黏滞阻尼器的研究多集中在阻尼器的参数优化上,很少考虑到阻尼器失效对斜拉桥抗震性能的影响。针对这一问题,以某三塔斜拉桥为背景,利用OpenSees平台建立斜拉桥有限元模型和可以考虑承载力及行程极限的黏滞阻尼器模型;分析黏滞阻尼器的阻尼系数和阻尼指数对斜拉桥地震响应的影响,确定阻尼器参数的取值;对不安装阻尼器、安装不考虑极限状态及考虑极限状态阻尼器等多种工况的斜拉桥进行非线性时程分析,对比各工况斜拉桥的地震响应。分析结果表明,在大震下,考虑极限状态阻尼器的耗能能力及减震效果将显著降低;不考虑阻尼器达到极限状态后失效的情况将高估耗能减震设计斜拉桥的抗震能力。 相似文献
3.
4.
被动及半主动摩擦阻尼器对合肥悲翠电视塔地震反应的 … 总被引：3，自引：0，他引：3
摩擦阻尼器是一种构造的耗能减振装置,已应用于国内外多座新建建筑的抗震设计和已建建筑的抗震加固。半主动摩擦阻尼器则通过调整阻尼器的起滑力来改善被动摩擦阻尼器的耗能减振性能。本文研究了被动及半主动摩擦阻尼器对于高耸塔架结构地震反应的减振效果。为满足摩擦阻尼器对高耸塔架结构风振控制的特殊需要,本文建立了合肥电视塔的空间桁架有限元模型和串联多自由度体系模型,并在形成控制力变换矩阵和计算摩擦阻尼器两端的相对 相似文献
5.
为了提高大跨度桥梁的抗震性能水平,基于粘滞阻尼器的结构减震控制技术成为专家学者研究的重点和工程设计人员首先考虑的抗震设防措施。现有成果主要集中在大跨度公路斜拉桥的研究和应用,在山区的非规则高墩钢桁连续梁桥研究的较少。以云南省元江大桥为例,采用Midas/civil建立弹性分析的有限元模型,对元江大桥进行了动力特性分析。采用快速非线性时程分析方法对粘滞阻尼器参数进行了优化分析,并且总结了粘滞阻尼器参数对高墩连续梁桥的减震作用规律。最后,通过有控和无控结构的地震动响应对比分析,评价了安装阻尼器后的结构主控部位的减震效果。结果表明:减震控制提高了结构的安全性。 相似文献
6.
消能减振房屋抗震设计方法研究述评 总被引：3，自引：0，他引：3
阐述了安装有粘滞流体阻尼器的消能减振房屋抗震设计的原理和方法,包括阻尼器的工作原理和计算模型,性能试验和检验的标准,附加阻尼比公式的推导和抗震设计方法等。 相似文献
7.
以鼓山大桥为工程背景,研究黏滞阻尼器对该桥抗震性能的影响。利用非线性动力时程分析的方法讨论了黏滞阻尼器参数C及ξ的不同组合对该桥塔底、墩底、梁端及塔顶等关键部分内力及变形的影响规律。综合考虑桥梁结构各个关键部位的反应情况,得出该桥的拟安装阻尼器的最优参数约为C=1500kN／（m·s）^0.3,ξ=0．30左右。分析结果表明：在纵桥向设置适当参数的阻尼器可有效减小纵桥向位移的同时改善关键构件受力。 相似文献
8.
通过设置粘滞阻尼器减小结构的地震反应是一种有效的被动控制方式,为与现行抗震设计水平相适应,减震结构和控制装置的设计也应该以可靠度为基础。本文结合粘滞阻尼减震结构的受力特性建立了此类耗能减震结构动力可靠度分析的实用简化计算方法。首先通过等价线性化方法,给出了层间三线型恢复力模型的等效平均刚度,粘滞阻尼器采用等效线性化的力学模型,建立了安装粘滞阻尼减震结构的等效线性随机分析模型。然后采用随机状态空间方法进行了粘滞阻尼减震结构的地震反应分析,基于层间变形失效准则和首次超越理论分析了粘滞阻尼减震结构的可靠度,并以粘滞流体阻尼器的变形超过其自身极限变形作为阻尼器的失效模式,讨论了粘滞阻尼器可靠度的计算。最后通过一个设置粘滞流体阻尼器的框架结构计算实例,说明了这种方法的运用。该方法可以作为一种实用的方法对振动控制结构在不同破坏状态下的抗震可靠度进行分析,为基于性能的抗震设计和优化提供参考。 相似文献
9.
为研究附设黏滞阻尼器的传统风格建筑混凝土梁-柱节点地震损伤演化规律,进行6个该类型构件的动力荷载试验,并分别采用位移型、能量型及位移-能量混合型损伤模型对其进行全过程评价,采用Park-Ang模型分析试件黏滞阻尼器型号、试件类型等因素对混凝土传统风格建筑梁柱节点损伤行为的影响。研究结果表明：附设黏滞阻尼器可显著提升传统风格建筑节点的承载能力、延性性能及耗能能力,结构的抗震性能得到较大幅度的提升;Park-Ang损伤模型与Banon损伤模型适用于传统风格建筑节点损伤演化规律的描述,建议对该类型节点的损伤规律表征选用该损伤模型。黏滞阻尼器型号可在一定程度上影响传统风格建筑的损伤演化发展;设计阻尼力大的试件虽然延性有所提高,但受荷过程中累积损伤也较大。 相似文献
10.
被动及半主动摩擦阻尼器对合肥翡翠电视塔地震反应的控制 总被引：5，自引：0，他引：5
摩擦阻尼器是一种构造简单的耗能减振装置,已应用于国内外多座新建建筑的抗震设计和已建建筑的抗震加固．半主动磨擦阻尼器则通过调整阻尼器的起滑力来改善被动摩擦阻尼器的耗能减振性能。本文研究了被动及半主动摩擦阻尼器对于高耸塔架结构地震反应的减振效果。为满足摩擦阻尼器对高耸塔架结构风振控制的特殊需要,本文建立了合肥电视塔的空间桁架有限元模型和串联多自由度体系模型,并在形成控制力变换矩阵和计算摩擦阻尼器两端的相对位移的过程中综合地运用了这两种力学模型。在半主动摩擦阻尼器的控制策略方面,本文提出了一种基于次优控制理论的半主动控制策略．本文研究表明,摩擦阻尼器可以抑制高耸塔架结构的地震反应．而半主动摩擦阻尼辞的耗能减振效果明显优于被动摩擦阻尼器． 相似文献
11.
In this study, several mass dampers were designed and fabricated to suppress the seismic responses of a ¼‐scale three‐storey building structure. The dynamic properties of the dampers and structure were identified from free and forced vibration tests. The building structure with or without the dampers was, respectively, tested on a shake table under the white noise excitation, the scaled 1940 El Centro earthquake and the scaled 1952 Taft earthquake. The dampers were placed on the building floors using the sequential procedure developed by the authors in previous studies. Experimental results indicated that the multiple damper system is substantially superior to a single tuned mass damper in mitigating the floor accelerations even though the multiple dampers are sub‐optimal in terms of tuning frequency, damping and placement. These results validated the sequential procedure for placement of the multiple dampers. The structure was also analysed numerically based on the shake table excitation and the identified structure and damper parameters for all test cases. Numerical and experimental results are in good agreement, validating the dynamic properties identified. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
12.
阻尼器是一种效果良好的减震装置,将阻尼器安装于结构中能够适时为结构体系提供阻尼力,从而减小地震作用对结构的破坏。黏滞阻尼器对振动的反应比较敏感,在结构受到较小振动时就可以发挥其减震效果,其阻尼力会随着振动周期和使用状态温度的不同而变化。当地震发生时,安装在结构中的阻尼器会消减地震作用,降低传导到主结构体系的地震能量,减小结构相对位移。本文介绍了黏滞阻尼器的工作原理和安装有黏滞阻尼器的结构体系的阻尼比的计算方法,对减震结构的减震效果的评析方法做出探讨,并以一安装有黏滞阻尼器的台湾某既有钢框架结构为例,分析了(1)该结构在遭受地震作用时的地震反应;(2)该结构体系在不同地震作用水平时的阻尼比,包括主体结构阻尼比和黏滞阻尼器阻尼比;(3)结构安装黏滞阻尼器后的减震效果。实例对本文的减震评析方法和减震效果进行了说明和分析,计算及分析结果表明利用黏滞阻尼器加固既有结构能够取得较好的减震效果,本文所提减震效果评析方法是一种实用有效的评析方法,对类似工程的减震评析具有一定的参考价值。 相似文献
13.
Investigated are earthquake responses of one‐way symmetric‐plan, one‐storey systems with non‐linear fluid viscous dampers (FVDs) attached in series to a linear brace (i.e. Chevron or inverted V‐shape braces).Thus, the non‐linear damper is viscous when the brace is considered rigid or viscoelastic (VE) when the brace is flexible. The energy dissipation capacity of a non‐linear FVD is characterized by an amplitude‐dependent damping ratio for an energy‐equivalent linear FVD, which is determined assuming the damper undergoes harmonic motion. Although this formulation is shown to be advantageous for single‐degree‐of‐freedom (SDF) systems, it is difficult to extend its application to multi‐degree‐of‐freedom (MDF) systems for two reasons: (1) the assumption that dampers undergo harmonic motion in parameterizing the non‐linear damper is not valid for its earthquake‐induced motion of an MDF system; and (2) ensuring simultaneous convergence of all unknown amplitudes of dampers is difficult in an iterative solution of the non‐linear system. To date, these limitations have precluded the parametric study of the dynamics of MDF systems with non‐linear viscous or VE dampers. However, they are overcome in this investigation using concepts of modal analysis because the system is weakly non‐linear due to supplemental damping. It is found that structural response is only weakly affected by damper non‐linearity and is increased by a small amount due to bracing flexibility. Thus, the effectiveness of supplemental damping in reducing structural responses and its dependence on the planwise distribution of non‐linear VE dampers were found to be similar to that of linear FVDs documented elsewhere. As expected, non‐linear viscous and VE dampers achieve essentially the same reduction in response but with much smaller damper force compared to linear dampers. Finally, the findings in this investigation indicate that the earthquake response of the asymmetric systems with non‐linear viscous or VE dampers can be estimated with sufficient accuracy for design applications by analysing the same asymmetric systems with all non‐linear dampers replaced by energy‐equivalent linear viscous dampers. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
14.
Adding dampers is a commonly adopted seismic risk mitigation strategy for modern buildings, and the corresponding design procedure of dampers has been well established by the Chinese Building Code. Even though all types of dampers are designed by the same procedure, actual seismic performance of the building may differ from one to the others. In this study, a nine-story benchmark steel building is established, and three different and typical types of dampers are designed according to the Chinese Building Code to realize structural vibration control under strong earthquake excitation. The seismic response of the prototype building equipped with a viscoelastic damper, viscous damper and buckling-restrained brace(BRB) subjected to 10 earthquake records are calculated, and Incremental Dynamic Analysis(IDA) is performed to describe progressive damage of the structure under increasing earthquake intensity. In the perspective of fragility, it shows that the viscoelastic damper has the highest collapse margin ratio(CMR), and the viscous damper provides the best drift control. Both the BRB and viscoelastic dampers can effectively reduce the floor acceleration responses in the mid-rise building. 相似文献
15.
Investigated is the accuracy in estimating the response of asymmetric one‐storey systems with non‐linear viscoelastic (VE) dampers by analysing the corresponding linear viscous system wherein all non‐linear VE dampers are replaced by their energy‐equivalent linear viscous dampers. The response of the corresponding linear viscous system is determined by response history analysis (RHA) and by response spectrum analysis (RSA) extended for non‐classically damped systems. The flexible and stiff edge deformations and plan rotation of the corresponding linear viscous system determined by the extended RSA procedure is shown to be sufficiently accurate for design applications with errors generally between 10 and 20%. Although similar accuracy is also shown for the ‘pseudo‐velocity’ of non‐linear VE dampers, the peak force of the non‐linear VE damper cannot be estimated directly from the peak damper force of the corresponding linear viscous system. A simple correction for damper force is proposed and shown to be accurate (with errors not exceeding 15%). For practical applications, an iterative linear analysis procedure is developed for determining the amplitude‐ and frequency‐dependent supplemental damping properties of the corresponding linear viscous system and for estimating the response of asymmetric one‐storey systems with non‐linear VE dampers from the earthquake design (or response) spectrum. Finally, a procedure is developed for designing non‐linear supplemental damping systems that satisfy given design criteria for a given design spectrum. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
16.
高烈度地震对铁路桥梁安全造成巨大隐患,且次生灾害将引起较大经济损失。该大跨连续梁桥所处地震带正进入活跃期,未来有发生较大规模强烈地震的可能,但桥梁自身不具备高烈度抗震能力,需利用粘滞阻尼器对其进行减震处理。采用斜向设置阻尼器并配合双曲面球型支座,来控制可能发生的纵向和横向地震。通过数值模拟进行阻尼器参数敏感性分析以及减震效果讨论,进而确定其最优设置方案。选取相关参数作为评价指标,对比加设阻尼器前后易损部位的地震响应,确定其在高烈度地震荷载激励下的减震效果。研究结果表明:在液体粘滞阻尼器的作用下,使得各墩协同受力,大大增加了结构的整体性,同时能很好弥补减隔震支座不能很好的控制上部结构位移的缺点,同时能降低罕遇地震力对桥墩的冲击损伤。因此,在高烈度区大跨度桥梁中更有必要设置阻尼器来抗震。 相似文献
17.
Experimental research into the seismic performance of buildings with passive oil dampers has so far been restricted to large-scale testing of frames erected on laboratory shaking tables that ignore the foundation soil below. This simplification of the problem falls short of replicating dynamic soil-structure interaction that would occur in the field. This paper presents the first experimental attempt at utilising high gravity dynamic centrifuge testing to replicate the response of a damped building at a reduced model scale. The paper compares the dynamic response of two similar two-degree-of-freedom model sway frames, one control (bare) frame and one frame equipped with miniature oil dampers, both structures founded on shallow raft foundations in dry dense sand. The miniature oil dampers successfully mitigate floor accelerations, drifts, and storey shear forces in the damped frame with minor modification to the frame stiffness. For strong, near resonance motions, global rocking of the undamped frame associated with physical uplifting of the foundation from the soil surface and subsequent yielding of sand beneath has led to floor acceleration levels, which are comparable to those obtained in the damped building fitted with miniature oil dampers. Assessment of the instrumentation installed on the miniature oil dampers reveals a viscoelastic damper behaviour with a dependency on stroke magnitude and on velocity. 相似文献
18.
By advancing the technologies regarding seismic control of structures and development of earthquake resistance systems in the past decades application of different types of earthquake energy dissipation system has incredibly increased. Viscous damper device as a famous and the simplest earthquake energy dissipation system is implemented in many new structures and numerous number of researches have been done on the performance of viscous dampers in structures subjected to earthquake. The experience of recent severe earthquakes indicates that sometimes the earthquake energy dissipation devices are damaged during earthquakes and there is no function for structural control system. So, damage of earthquake energy dissipation systems such as viscous damper device must be considered during design of earthquake resistance structures.This paper demonstrates the development of three-dimensional elasto-plastic viscous damper element consisting of elastic damper in the middle part and two plastic hinges at both ends of the element which are compatible with the constitutive model to reinforce concrete structures and are capable to detect failure and damage in viscous damper device connections during earthquake excitation. The finite element model consists of reinforced concrete frame element and viscous damper element is developed and special finite element algorithm using Newmark׳s direct step-by-step integration is developed for inelastic dynamic analysis of structure with supplementary elasto-plastic viscous damper element. So based on all the developed components an especial finite computer program has been codified for “Nonlinear Analysis of Reinforced Concrete Buildings with Earthquake Energy Dissipation System”. The evaluation of seismic response of structure and damage detection in structural members and damper device was carried out by 3D modeling, of 3 story reinforced concrete frame building under earthquake multi-support excitation. 相似文献