共查询到20条相似文献，搜索用时 31 毫秒
1.
GEOLOGICAL AND GEOMORPHIC EXPRESSIONS OF LATE QUATERNARY STRIKE-SLIP ACTIVITY ON JINTA NANSHAN FAULT IN NORTHERN EDGE OF QING-ZANG BLOCK 
下载免费PDF全文
下载免费PDF全文 Jinta Nanshan Fault is an important fault in northeast front of Qing-Zang Plateau, and it is crucial for determining the eastern end of Altyn Tagh Fault. However, there is still debate on its significant strike-slip movement.
In this paper, we study the Late Quaternary activity of Jinta Nanshan Fault and its geological and geomorphic expressions by interpreting aerial photographs and high-resolution remote sensing images, surveying and mapping of geological and geomorphic appearances, digging and clarifying fault profiles and mapping deformation characteristics of micro-topographies, then we analyze whether strike-slip activity exists on Jinta Nanshan Fault.
We get a more complete fault geometry than previous studies from most recent remote sensing images. Active fault traces of Jinta Nanshan mainly include 2 nearly parallel, striking 100°~90° fault scarps, and can be divided into 3 segments. West segment and middle segment form a left stepover with 2~2.5km width, and another stepover with 1.2km width separates the middle and east segment.
We summarize geomorphic and geologic evidence relating to strike slip activity of Jinta Nanshan Fault. Geomorphic expressions are as follows:First, fault scarps with alternating facing directions; second, sinistral offset of stream channels and micro-topographies; third, pull-apart basins and compressive-ridges at discontinuous part of Jinta Nanshan Fault. Geologic expressions are as follows:First, fault plane characteristics, including extremely high fault plane angle, unstable dip directions and coexistence of normal fault and reverse fault; second, flower structures.
Strike-slip rate was estimated by using geomorphic surface age of Zheng et al.(2013)and left-lateral offset with differential GPS measurements of the same geomorphic surface at field site in Fig. 4e. We calculated a strike-slip rate of (0.19±0.05)mm/a, which is slightly larger than or almost the same with vertical slip rate of (0.11±0.03)mm/a from Zheng et al.(2013).
When we confirm the strike-slip activity of Jinta Nanshan, we discuss its potential dynamic sources:First, eastern extension of Altyn Tagh Fault and second, strain partitioning of northeastward extension of Qilian Shan thrust belt. The first one is explainable when it came to geometric pattern of several E-W striking fault and eastward decreasing strike slip rate, but the former cannot explain why the Heishan Fault, which locates between the the Altyn Tagh Fault and Jinta Nanshan Fault, is a pure high angle reverse fault. The latter seems more explainable, because oblique vectors may indeed partition onto a fault and manifest strike-slip activity. 相似文献
2.
利用1999—2007期GPS水平速度场数据,采用Defnode负位错反演程序估算了龙门山断裂在汶川地震前的闭锁程度和滑动亏损分布,结合龙门山断裂带附近地表水平应变率场结果,综合分析了震前地壳变形特征.反演结果表明,震前龙门山断裂中北段处于完全闭锁状态,闭锁深度达到21 km(闭锁比例0.99)左右,垂直断层方向的挤压滑动亏损速率约为2.2 mm/a,平行断层方向的右旋滑动亏损速率约为4.6 mm/a.龙门山断裂南段只有地表以下12 km闭锁程度较高(闭锁比例0.99),垂直断层方向滑动亏损速率约为1.4 mm/a,平行断层方向滑动亏损速率约为4.6 mm/a;在12~16 km处闭锁比例约为0.83,垂直断层方向滑动亏损速率约为1.2 mm/a,平行断层方向滑动亏损速率约为3.8 mm/a;在16~21 km处闭锁比例约为0.75,垂直断层方向滑动亏损速率约为1.1 mm/a,平行断层方向滑动亏损速率约为3.5 mm/a.在21~24 km处整条断裂均逐步转变为蠕滑.上述反演结果与区域应变计算获得的龙门山断裂带中北段整体应变积累速率较低、南段应变积累速率较高相一致,均表明中北段闭锁程度高、南段闭锁程度稍低,该特征可以较好地解释汶川地震时从震中向北东向单向破裂现象. 相似文献
3.
4.
通过卫星影像解译、野外实地调查与地质填图,对滇西南地区黑河断裂中西段晚第四纪构造活动特征进行了研究.结果表明,黑河断裂为一条规模较大的区域性活动断裂带,西起沧源县南,向东南止于澜沧江断裂,全长约168 km,走向280°～310°.该断裂晚第四纪新活动性具有一定的差异性和分段性.根据其几何结构、最新活动性及1988年澜沧7.6级地震破裂带特征,可将黑河断裂从西向东划分为沧源-木戛、木戛-南代和南代-勐往三条次级断裂段.其中的中、西段长约88 km,全新世活动显著,活动性质以右旋走滑为主.沿断裂形成了丰富的断错地貌现象.西段断裂的最新活动断错了全新世晚期地层;中段是1988年澜沧7.6级地震的发震断裂之一.根据对断错冲沟的测量和年代测试,得到其全新世以来右旋滑动速率为(3.54±0.78)mm/a,与区域上其它断裂的滑动速率大致相当,反映了其区域构造活动的整体性和协调性. 相似文献
5.
6.
The Riyue Mt. Fault is a secondary fault controlled by the major regional boundary faults (East Kunlun Fault and Qilian-Haiyuan Fault). It lies in the interior of Qaidam-Qilianshan block and between the major regional boundary faults. The Riyue Mt. fault zone locates in the special tectonic setting which can provide some evidences for recent activity of outward extension of NE Tibetan plateau, so it is of significance to determine the activity of Riyue Mt. Fault since late Pleistocene to Holocene. In this paper, we have obtained some findings along the Dezhou segment of Riyue Mt. Fault by interpreting the piedmont alluvial fans, measuring fault scarps, and excavating trenches across the fault scarp. The findings are as follows:(1) Since the late Pleistocene, there are an alluvial fan fp and three river terraces T1-T3 formed on the Dezhou segment. The abandonment age of fp is approximately (21.2±0.6) ka, and that of the river terrace T2 is (12.4±0.11) ka. (2) Since the late Pleistocene, the dextral strike-slip rate of the Riyue Mt. Fault is (2.41±0.25) mm/a. In the Holocene, the dextral strike-slip rate of the fault is (2.18±0.40) mm/a, and its vertical displacement rate is (0.24±0.16) mm/a. This result indicates that the dextral strike-slip rate of the Riyue Mt. Fault has not changed since the late Pleistocene. It is believed that, as one of the dextral strikeslip faults, sandwiched between the the regional big left-lateral strike-slip faults, the Riyue Mt. Fault didn't cut the boundary zone of the large block. What's more, the dextral strike-slip faults play an important role in the coordination of deformation between the sub-blocks during the long term growth and expansion of the northeast Tibetan plateau. 相似文献
7.
8.
The Qujiang Fault is one of the most seismically active faults in western Yunnan, China and is considered to be the seismogenic fault of the 1970 MS7.7 Tonghai earthquake. The Qujiang Fault is located at the southeastern tip of the Sichuan-Yunnan block. In this study, we examine the geometry, kinematics, and geomorphology of this fault through field observations and satellite images. The fault is characterized by dextral strike-slip movements with dip-slip components and can be divided into northwest and southeast segments according to different kinematics. The northwest segment shows right-lateral strike-slip with normal components, whereas it is characterized by dextral movements with the northeast wall thrusting over the opposite in the southeast segment. The offset landforms are well developed along the strike of the fault with displacements ranging from 3.7m to 830m. The Late Quaternary right-lateral slip rate was determined to be 2.3～4.0mm/a through dating and measuring on the offset features. The variation of the slip and uplift rates along the fault strike corresponds well to the fault kinematics segmentation: the slip rate on the northwest segment is above 3mm/a with an uplift rate of 0.6～0.8mm/a; however, influenced by the Xiaojiang Fault, the southeast segment shows apparent thrust components. The slip rate decreases to below 3.0mm/a with an uplift rate of 1.1mm/a, indicating different uplift between the northwest and southeast segments. 相似文献
9.
XIANG HongFa WAN JingLin HAN ZhuJun GUO ShunMin ZHANG WanXia CHEN LiChun DONG XingQuan 《中国科学D辑(英文版)》2007,50(3)
Tectonically,the large-scale right-lateral strike-slip movement along the Red River fault zone is characterized at its late phase with the southeastward extension and deformation of the Northwestern Yunnan normal fault depression on its northern segment,and the dextral shear displacement on its central-southern segment.Research of the relations between stratum deformation and fault movement on the typical fault segments,such as Jianchuan,southeast Midu,Yuanjiang River,Yuanyang,etc.since the Miocene Epoch shows that there are two times dextral faulting dominated by normal shearing occurring along the Red River fault zone since the Miocene Epoch.The fission track dating (abbreviated to FT dating,the same below) is conducted on apatite samples collected from the above fault segments and relating to these movements.Based on the measured single grain's age and the confined track length,we choose the Laslet annealing model to retrieve the thermal history of the samples,and the results show that the fault zone experienced two times obvious shear displacement,one in 5.5 ±1.5 MaBP and the other in 2.1±0.8 MaBP.The central-southern segment sees two intensive uplifts of mountain mass in the Yuanjiang River-Yuanyang region at 3.6-3.8 MaBP and 1.6-2.3 MaBP,which correspond to the above-mentioned two dextral normal displacement events since the late Miocene Epoch. 相似文献
10.
11.
昌马断裂带是是青藏高原北部一条活动强烈的左旋走滑断裂带。它表现为重力、航磁、地壳厚度的综合异常梯度带，属于断面陡、切割深的超岩石圈断裂。昌马断裂带由１２条长４公里至１８公里不等的不连续的主断层和４条次级断层组成，可划分为东、中、西三大段落。断裂的水平位移和滑动速率具有分段性，全新世以来，东、中、西三段的左旋水平滑动速率分别为４．１毫米／年，２．６毫米／年和１．５毫米／年。北东东、北北西和北西西三个方向断层的位移具有分级特征，不同级别的位移具有良好的同步性。全新世以来北东东、北北西和北西西三个方向断层的水平滑动速率分别为４．１毫米／年、３．８毫米／年和２．７毫米／年。白垩纪以来，昌马断裂呈天平式运动，显示了枢纽断裂运动特征，枢纽轴位于断裂中段。昌马地震震源破裂性质及其反映的震源应力场与地震破裂带的破裂性质及其反映的构造应力场不一致。昌马地震震源机制解反映了北北西～南南东挤压，作用应力近于水平的震源应力场；昌马地震破裂带的变形组合反映了东北～南西挤压的构造应力场。昌马地震破裂带长１２０公里，分为东部正走滑段、中部逆走滑段和西部尾端破裂段，显示了多个水平位移峰值。全新世以来，沿昌马断裂发生了６次强震事件，强震复发 相似文献
12.
利用１４Ｃ、热释光（ＴＬ）样品年代及扩散方程计算结果，结合区域黄土剖面中古土壤年龄，对毛毛山地区晚第四纪各级地貌年龄进行了对比研究。根据毛毛山活动断裂水平位移和垂直位移分布明显的分组特征，求得毛毛山断裂带不同段落不同时段的平均滑动速率。大约自中更新世晚期以来，毛毛山断裂走滑段的平均水平滑动速率为２．３～３．９ｍｍ／ａ，垂直滑动速率为０．０７～０．１９ｍｍ／ａ；天祝盆地倾滑段垂直滑动速率为０．１１～０．８６ｍｍ／ａ。沿断裂带滑动速率具明显的非均匀性特点，表现为自东向西水平位移具累积滑动亏损特征，垂直位移则具补偿性 相似文献
13.
Zhou Rongjun 《中国地震研究》2005,19(3):292-305
INTRODUCTIONGeological investigations since the1970s have shown that the sub_longitudinal Jinshajiang andHonghe(Red River)fault zones constitutethe western boundary of“Rhombic Sichuan_Yunnan Block”onthe Sichuan_Tibet border and display mainly dextral sh… 相似文献
14.
Geological analysis and FT dating of the large-scale right-lateral strike-slip movement of the Red River fault zone 总被引：1，自引：1，他引：1
XIANG HongFa WAN JingLin HAN ZhuJun GUO ShunMin ZHANG WanXia CHEN LiChun & DONG XingQuan Institute of Geology China Earthquake Administration Beijing China Earthquake Administration of Yunnan Province Kunming China 《中国科学D辑(英文版)》2007,50(3):331-342
Tectonically, the large-scale right-lateral strike-slip movement along the Red River fault zone is char-acterized at its late phase with the southeastward extension and deformation of the Northwestern Yunnan normal fault depression on its northern segment, and the dextral shear displacement on its central-southern segment. Research of the relations between stratum deformation and fault movement on the typical fault segments, such as Jianchuan, southeast Midu, Yuanjiang River, Yuanyang, etc. since the Miocene Epoch shows that there are two times dextral faulting dominated by normal shearing occurring along the Red River fault zone since the Miocene Epoch. The fission track dating (abbrevi-ated to FT dating, the same below) is conducted on apatite samples collected from the above fault segments and relating to these movements. Based on the measured single grain’s age and the con-fined track length, we choose the Laslet annealing model to retrieve the thermal history of the samples, and the results show that the fault zone experienced two times obvious shear displacement, one in 5.5 ± 1.5 MaBP and the other in 2.1± 0.8 MaBP. The central-southern segment sees two intensive uplifts of mountain mass in the Yuanjiang River-Yuanyang region at 3.6―3.8 MaBP and 1.6―2.3 MaBP, which correspond to the above-mentioned two dextral normal displacement events since the late Miocene Epoch. 相似文献
15.
ANALYSIS OF EVOLUTION OF THE RIYUESHAN FAULT SINCE LATE PLEISTOCENE USING STRUCTURAL GEOMORPHOLOGY 下载免费PDF全文
下载免费PDF全文 The northeastern margin of Tibetan plateau is an active block controlled by the eastern Kunlun fault zone, the Qilian Shan-Haiyuan fault zone, and the Altyn Tagh fault zone. It is the frontier and the sensitive area of neotectonic activity since the Cenozoic. There are widespread folds, thrust faults and stike-slip faults in the northeastern Tibetan plateau produced by the intensive tectonic deformation, indicating that this area is suffering the crustal shortening, left-lateral shear and vertical uplift. The Riyueshan Fault is one of the major faults in the dextral strike-slip faults systems, which lies between the two major large-scale left-lateral strike-slip faults, the Qilian-Haiyuan Fault and the eastern Kunlun Fault. In the process of growing and expanding of the entire Tibetan plateau, the dextral strike-slip faults play an important role in regulating the deformation and transformation between the secondary blocks. In the early Quaternary, because of the northeastward expansion of the northeastern Tibetan plateau, tectonic deformations such as NE-direction extrusion shortening, clockwise rotation, and SEE-direction extrusion occurred in the northeastern margin of the Tibetan plateau, which lead to the left-lateral slip movement of the NWW-trending major regional boundary faults. As the result, the NNW-trending faults which lie between these NWW direction faults are developed. The main geomorphic units developed within the research area are controlled by the Riyueshan Fault, formed due to the northeastward motion of the Tibet block. These geomorphic units could be classified as:Qinghai Lake Basin, Haiyan Basin, Datonghe Basin, Dezhou Basin, and the mountains developed between the basins such as the Datongshan and the Riyueshan. Paleo basins, alluvial fans, multiple levels of terraces are developed at mountain fronts. The climate variation caused the formation of the geomorphic units during the expansion period of the lakes within the northeastern Tibetan plateau. There are two levels of alluvial fans and three levels of fluvial terrace developed in the study area, the sediments of the alluvial fans and fluvial terraces formed by different sources are developed in the same period. The Riyueshan Fault connects with the NNW-trending left-lateral strike-slip north marginal Tuoleshan fault in the north, and obliquely connects with the Lajishan thrust fault in the south. The fault extends for about 180km from north to south, passing through Datonghe, Reshui coal mine, Chaka River, Tuole, Ketu and Xicha, and connecting with the Lajishan thrusts near the Kesuer Basin. The Riyueshan Fault consists of five discontinuous right-step en-echelon sub-fault segments, with a spacing of 2~3km, and pull-apart basins are formed in the stepovers.
The Riyueshan Fault is a secondary fault located in the Qaidam-Qilian active block which is controlled by the major boundary faults, such as the East Kunlun Fault and the Qilian-Haiyuan Fault. Its activity characteristics provide information of the outward expansion of the northeastern margin of Tibet. Tectonic landforms are developed along the Riyueshan Fault. Focusing on the distinct geomorphic deformation since late Pleistocene, the paper obtains the vertical displacement along the fault strike by RTK measurement method. Based on the fault growth-linkage theory, the evolution of the Riyueshan Fault and the related kinetic background are discussed. The following three conclusions are obtained:1)According to the characteristics of development of the three-stage 200km-long steep fault scarp developed in the landforms of the late Pleistocene alluvial fans and terraces, the Riyueshan Fault is divided into five segments, with the most important segment located in the third stepover(CD-3); 2)The three-stage displacement distribution pattern of the Riyueshan Fault reveals that the fault was formed by the growths and connections of multiple secondary faults and is in the second stage of fault growth and connection. With CD-3 as the boundary, the faults on the NW side continue to grow and connect; the fault activity time on the SE side is shorter, and the activity intensity is weaker; 3)The extreme value of the fault displacement distribution curve indicates the location of strain concentration and stress accumulation. With the stepover CD-3 as the boundary, the stress and strain on NW side are mainly concentrated in the middle and fault stepovers. The long-term accumulation range of stress on the SE side is relatively dispersed. The stress state may be related to the counterclockwise rotation inside the block under the compression of regional tectonic stress. 相似文献
16.
Introduction The 1303 Shanxi Hongtong M=8 earthquake is the earliest M=8 event determined in histori-cal records in China and the largest recorded in Shanxi fault-depression system in history. Some researchers have discussed the tectonic environment of this earthquake (DENG, et al, 1973; DENG, 1984; DENG, XU, 1994, 1995; Seismo-geological Brigade, State Seismological Bureau, Depart-ment of Geology and Geography, Peking University, 1979; LIU, XIAO, 1982; ZHANG, JIA, 1986; SU, … 相似文献
17.
小江断裂带西支断裂南段新活动初探 总被引：11，自引：0，他引：11
本文根据实地调查,分析了小江西支断裂南段两条分支断裂的展布特征及其活动性。用冲沟长度、错动量及平均侵蚀速率,估算了断裂的水平滑动速率。指出南段分支断裂作多重右阶斜列展布,现今活动以左旋走滑为主,兼有倾向运动分量,全新世以来平均水平滑动速率为1.66mm/a。 相似文献
18.
REDETERMINATION OF THE SURFACE RUPTURES CAUSED BY THE HONGYAPU,GANSU PROVINCE,M7 1/4 EARTHQUAKE OF 1609 下载免费PDF全文
下载免费PDF全文 The Hongyapu M7 1/4 earthquake in 1609 occurred on the Fodongmiao-Hongyazi fault, which is a Holocene active thrust in the middle segment of the northern Qilianshan overthrust fault zone, located in the north-eastern edge of the Tibet plateau. This earthquake caused death of more than 840 people, ruined the Hongyapu Village and had an affected area ca. 200km2. Previous work provided different opinions on the length of the earthquake surface rupture zone, such as 60km from the Bailanghe western riverbank to the Fenglehe eastern river bank, and only 11km from the Hongyazi village to eastern edge of the Hujiatai anticline. And the surface rupture zone appears in the western and middle segments of the Fodongmiao-Hongyazi fault zone.
Our detailed geomorphic analysis and topographic survey found that the surface rupture zone with a total length of ca 95km is present on the new geomorphic surfaces which are slightly higher than the modern allvial-dilvial fans and riverbeds, which begins from the Hongshuiba river, Jiuquan in the west extending to the Toudaodongwan, southern Gansu in the east along the Fodongmiao-Hongyazi Fault. The surface rupture zone occurred later than 0 A D, proved by the study of trenchs and chronology. Compared to the previous research on the epicenters of the historical major earthquakes in and around the study region, this surface rupture zone is considereded to be the surface rupture zone of the Hongyapu earthquake of 1609 in Gansu provice.
Average vertical co-seismic displacement of the 1609 Hongyapu earthquake is 1.1m with maximum 1.8m, dominated by thrusting. The NNW striking Xiaoqun segment shows thrust with a component of dextral strike slip and the NEE-trending East Hongshancun segment is also mainly thrust but with sinistral strike slipp. The lateral movement could be caused by the local change of the fault strike direction.
Based on the length of surface ruptures, the maximum coseismic displacement and fault dipping, this event is estimated to be of ca. MW7.0~MW7.4, close to the M7 1/4 suggested by previous studies. 相似文献
19.
20.
TERRACE DEFORMATION AND SLIP RATES OF THE DONGBIELIEKE FAULT IN WESTERN JUNGGAR BASIN SINCE THE LATE QUATERNARY 下载免费PDF全文
下载免费PDF全文 Strike-slip fault plays an important role in the process of tectonic deformation since Cenozoic in Asia. The role of strike-slip fault in the process of mountain building and continental deformation has always been an important issue of universal concern to the earth science community. Junggar Basin is located in the hinterland of Central Asia, bordering on the north the Altay region and the Baikal rift system, which are prone to devastating earthquakes, the Tianshan orogenic belt and the Tibet Plateau on the south, and the rigid blocks, such as Erdos, the South China, the North China Plain and Amur, on the east. Affected by the effect of the Indian-Eurasian collision on the south of the basin and at the same time, driven by the southward push of the Mongolian-Siberian plate, the active structures in the periphery of the basin show a relatively strong activity. The main deformation patterns are represented by the large-scale NNW-trending right-lateral strike-slip faults dominated by right-lateral shearing, the NNE-trending left-lateral strike-slip faults dominated by left-lateral shearing, and the thrust-nappe structure systems distributed in piedmont of Tianshan in the south of the basin. There are three near-parallel-distributed left-lateral strike-slip faults in the west edge of the basin, from the east to the west, they are:the Daerbute Fault, the Toli Fault and the Dongbielieke Fault. This paper focuses on the Dongbielieke Fault in the western Junggar region. The Dongbielieke Fault is a Holocene active fault, located at the key position of the western Junggar orogenic belt. The total length of the fault is 120km, striking NE. Since the late Quaternary, the continuous activity of the Dongbielieke Fault has caused obvious left-lateral displacement at all geomorphologic units along the fault, and a linear continuous straight steep scarp was formed on the eastern side of the Tacheng Basin. According to the strike and the movement of fault, the fault can be divided into three segments, namely, the north, middle and south segment.
In order to obtain a more accurate magnitude of the left-lateral strike-slip displacement and the accumulative left-lateral strike-slip displacement of different geomorphic surfaces, we chose the Ahebiedou River in the southern segment and used the UAV to take three-dimensional photographs to obtain the digital elevation model(the accuracy is 10cm). And on this basis, the amount of left-lateral strike-slip displacement of various geological masses and geomorphic surfaces(lines)since their formation is obtained. The maximum left-lateral displacement of the terrace T5 is(30.7±2.1)m and the minimum left-lateral displacement is(20.1±1.3)m; the left-lateral displacement of the terrace T4 is(12±0.9)m, and the left-lateral displacement of the terrace T2 is(8.7±0.6)m. OSL dating samples from the surface of different level terraces(T5, T4, T2 and T1)are collected, processed and measured, and the ages of the terraces of various levels are obtained. By measuring the amount of left-lateral displacements since the Late Quaternary of the Dongbielieke Fault and combining the dating results of the various geomorphic surfaces, the displacements and slip rates of the fault on each level of the terraces since the formation of the T5 terrace are calculated. Using the maximum displacement of(30.7±2.1)m of the T5 terrace and the age of the geomorphic surface on the west bank of the river, we obtained the slip rate of(0.7±0.11)mm/a; similarly, using the minimum displacement of(20.1±1.3)m and the age of the geomorphic surface of the east bank, we obtained the slip rate of(0.46±0.07)mm/a. T5 terrace is developed on both banks of the river and on both walls of the fault. After the terraces are offset by faulting, the terraces on foot wall in the left bank of the river are far away from the river, and the erosion basically stops. After that, the river mainly cuts the terraces on the east bank. Therefore, the west bank retains a more accurate displacement of the geomorphic surface(Gold et al., 2009), so the left-lateral slip rate of the T5 terrace is taken as(0.7±0.11)mm/a. The left-lateral slip rate calculated for T4 and T2 terraces is similar, with an average value of(0.91±0.18)mm/a. In the evolution process of river terraces, the lateral erosion of high-level terrace is much larger than that of low-level terrace, so the slip rate of T4 and T2 terraces is closer to the true value. The left-lateral slip rate of the Dongbielieke Fault since the late Quaternary is(0.91±0.18)m/a. Compared with the GPS slip rate in the western Junggar area, it is considered that the NE-trending strike-slip motion in this area is dominated by the Dongbielieke Fault, which absorbs a large amount of residual deformation while maintaining a relatively high left-lateral slip rate. 相似文献