共查询到19条相似文献，搜索用时 562 毫秒
1.
磁流变阻尼器的两种力学模型和试验验证 总被引：41，自引：3，他引：41
本文根据我们设计制作出的磁流变阻尼器的阻尼特性试验结果，提出了描述阻尼器动态特性的两种新的力学模型。一种称之为修正的Bingham模型，它由Bingham单元（库仑摩擦单元与粘滞单元并联）与弹簧单元串联组成。该弹簧单元与磁流变液屈服前区的初始剪切模量和蓄能器的刚度等有关。另一种称为修正的Dahl模型，它采用Dahl模型来模拟库仑摩擦力，克服了常用的Bouc-Wen模型需要确定的参数过多的缺点。为了使模型在阻尼器的电流强度（磁场强度）改变的情况下仍然有效，引入一个内变量描述模型参数与电流强度（磁场强度）的关系。最后，通过理论分析与试验结果的比较，证明本文提出的两种力学模型能够较为精确地描述大多数的磁流变阻尼器在改变电流强度（磁场强度）情况下的动态特性。 相似文献
2.
3.
500kN 足尺磁流变液阻尼器设计的关键技术 总被引：1，自引：0，他引：1
对我们制作的、目前出力居世界前列的500kN足尺MR阻尼器设计的关键技术、阻尼器的性能试验及力学模型的参数识别进行了研究。在对磁流变液材料的最大屈服剪应力、抗沉降稳定性以及磁滞响应时间等关键性能试验分析的基础上,确认该磁流变液的抗沉降稳定性和其他两项性能指标满足MR阻尼器的设计与工程应用要求。同时,对此500kN足尺MR阻尼器设计的关键技术,包括内置式碟型弹簧蓄能器、磁场防漏设计以及引线保护等进行了介绍;并通过对此MR阻尼器性能的试验,依据阻尼最小二乘法,对MR阻尼器采用的修正的B ingham模型的参数进行了识别,得到了与试验结果吻合的MR阻尼器的力学模型。通过研究可知,高性能磁流变液材料的制备以及MR阻尼器设计的关键技术是大吨位足尺MR阻尼器成功的关键。 相似文献
4.
5.
足尺磁流变阻尼器的建模及动态特性 总被引：15，自引：4，他引：15
在过去三十年左右的时间里,结构保护系统受到了广大研究者的普遍关注.这种保护系统可以用来降低自然灾害(如地震、强风)对上木工程建筑的损害.由于磁流变阻尼器机械结构简单,动态范围大,能耗低,回复力大,鲁棒性良好,能够在满足不同工程项目需求的同时提供有效的结构抗震抗风手段,目前它是一种非常有前途的半主动结构减震装置.本文首先介绍了磁流变液体和装置的主要特性和优点,建立了磁流变阻尼器的伪静力轴对称模型,并将其结果和平行板模型以及阻尼器实验结果进行了比较.尽管伪静力模型对于阻尼器的设计十分有效,但是它们还不足以描述阻尼器的动态特性.对实际工程应用来说,动态响应时间是一项非常重要的性能指标.文章还讨论了影响磁流变阻尼器动态响应时间的因素,建立了基于Bouc-Wen模型的阻尼器动态模型.同时文章也提出了优化阻尼器动态响应的途径和方法以及其实验验证. 相似文献
6.
安装MR阻尼器工程结构的非参数模型自适应控制 总被引：4，自引：0，他引：4
本文首先建立了结构一磁流变阻尼器非线性系统的非参数模型,该模型不需要太多的受控结构的先验知识,且具有结构简单、参数少,是时变增量形式等优点,因此适合于非线性控制系统的设计。在此基础上,本文提出了非参数模型学习自适应半主动控制算法,并以一个6层框架结构为例,进行了深入的仿真数值分析。计算结果表明,采用本文提出的控制算法能得到令人满意的控制效果。通过在较大范围内选取结构参数值,验证了算法具有较好的鲁棒性。 相似文献
7.
磁流变阻尼器作为一种比较典型的半主动控制元件,具有构造简单、响应速度快、耐久性好、阻尼力大且连续可调等优点。即使地震中能源中断,磁流变阻尼器仍可以作为被动耗能装置继续工作发挥作用,可靠性高。设计合理有效的磁流变阻尼器半主动控制方法,对于整体结构的减震效果尤其重要。提出一种改进的磁流变阻尼器的半主动控制策略-改进的Bang-Bang控制策略,对装有磁流变阻尼器的减震控制3层框架结构进行了一系列的实时混合模拟试验,对多种半主动控制方法下的振动控制效果进行试验分析。试验结果表明:磁流变阻尼器对框架结构的减震效果显著,并验证了提出的磁流变阻尼器半主动控制策略的有效性。 相似文献
8.
9.
基于AFSMC算法的结构非线性振动MR控制与仿真分析 总被引：2，自引：0，他引：2
作为最近发展起来的高性能半主动控制装置,磁流变阻尼器通过改变磁场强度来调节控制力,可靠度高,体积小,出力大,并且具有Fail-Safe的特点,是一种具有广泛应用前景的新型结构控制装置。本文主要研究结构非线性振动的磁流变阻尼半主动控制。首先采用我们提出的自适应模糊滑模控制(AFSMC)算法得到了结构非线性振动的主动控制力,然后参照主动控制力,提出和仿真实现了结构非线性振动的磁流变阻尼半主动控制。最后,针对3层和20层benchm ark非线性模型,每层均设置一个磁流变阻尼器,对在给定的地震动下的结构响应进行了计算,分析了半主动控制跟踪主动控制的效果,并且对于半主动控制下的结构位移响应、加速度响应等各项指标也进行了对比分析。仿真结果表明,由于自适应模糊滑模控制算法与半主动控制算法相结合可以很好地实现结构非线性振动的半主动控制,所以能够得到令人满意的控制结果。 相似文献
10.
广畅国际大厦磁流变和粘滞阻尼器抗震分析 总被引：4，自引：0，他引：4
针对上海广畅国际大厦的抗震问题，通过对不同控制装置的优缺点和适用范围进行比较分析后，采用磁流变阻尼器和粘滞阻尼器相结合的方式，探讨了该结构在无控和安装控制装置后在地震作用下的动力响应和控制效果。文中通过建立结构的力学模型，首先分析了无控结构的动力特性；此后分析了无控结构以及安装磁流变阻尼器和粘滞阻尼器的结构在多遇地震以及罕遇地震作用下的动力响应。分析结果表明，采取磁流变阻尼器以及粘滞阻尼器相结合的方式，能够有效地控制该结构在地震作用下的响应。 相似文献
11.
Based on the Bingham parallel-plate model, a simplified design method of shear-valve magnetorheological(MR) dampers is proposed considering the magnetic circuit optimization. Correspondingly, a new MR damper with a full-length effective damping path is proposed. The prototype dampers are also fabricated and studied numerically and experimentally. According to the test results, the Bingham parallel-plate model is further modified to obtain a damping force prediction model of the proposed MR dampers. This prediction model considers the magnetic saturation phenomenon. The study indicates that the proposed simplified design method is simple, effective and reliable. The maximum damping force of the proposed MR dampers with a full-length effective damping path is at least twice as large as those of conventional MR dampers. The dynamic range of damping force increases by at least 70%. The proposed damping force prediction model considers the magnetic saturation phenomenon and it can realize the actual characteristic of MR fluids. The model is able to predict the actual damping force of MR dampers precisely. 相似文献
12.
Magneto‐rheological (MR) dampers are a promising device for seismic hazard mitigation because their damping characteristics can be varied adaptively using an appropriate control law. During the last few decades researchers have investigated the behavior of MR dampers and semi‐active control laws associated with these types of dampers for earthquake hazard mitigation. A majority of this research has involved small‐scale MR dampers. To investigate the dynamic behavior of a large‐scale MR damper, characterization tests were conducted at the Lehigh Network for Earthquake Engineering Simulation equipment site on large‐scale MR dampers. A new MR damper model, called the Maxwell Nonlinear Slider (MNS) model, is developed based on the characterization tests and is reported in this paper. The MNS model can independently describe the pre‐yield and post‐yield behavior of an MR damper, which makes it easy to identify the model parameters. The MNS model utilizes Hershel–Bulkley visco‐plasticity to describe the post‐yield non‐Newtonian fluid behavior, that is, shear thinning and thickening behavior, of the MR fluid that occurs in the dampers. The predicted response of a large‐scale damper from the MNS model along with that from existing Bouc–Wen and hyperbolic tangent models, are compared with measured response from various experiments. The comparisons show that the MNS model achieves better accuracy than the existing models in predicting damper response under cyclic loading. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
13.
Pounding between adjacent superstructures has been a major cause of highway bridge damage in the past several earthquakes. This paper presents an experimental and analytical study on pounding reduction of highway bridges subjected to earthquake ground motions by using magnetorheological (MR) dampers. An analytical model, which incorporates structural pounding and MR dampers, is developed. A series of shaking table tests on a 1:20 scaled base‐isolated bridge model are performed to investigate the effects of pounding between adjacent superstructures on the dynamics of the structures. Based on the test results, the parameters of the linear and the nonlinear viscoelastic impact models are identified. Performance of the semiactive system for reducing structural pounding is also investigated experimentally, in which the MR dampers are used in conjunction with the proposed control strategy, to verify the effectiveness of the MR dampers. Structural responses are also simulated by using the established analytical model and compared with the shaking table test results. The results show that pounding between adjacent superstructures of the highway bridge significantly increases the structural acceleration responses. For the base‐isolated bridge model considered here, the semiactive control system with MR dampers effectively precludes pounding. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
14.
本文采用Spencer提出的MR模型,对斜拉索和MR阻尼器组成的系统进行了动力分析,考察了MR阻尼器型号、安装位置、施加的电压以及斜拉索基频(张力、索长、质量)、激励荷载(类型、频率、大小)等各种因素对斜拉索共振峰频率漂移的影响。进而对钱江三桥南岸154m长的斜拉索进行了现场试验。斜拉索自由振动的衰减信号通过阶跃激励的方法获得,经小波变换、Hilbert变换识别出系统的共振峰频率,并与斜拉索在安装油阻尼器和无阻尼器两种情况进行了比较。计算了杭州湾大桥330m长的索在被动控制、半主动控制下的各阶共振峰频率。研究表明,斜拉索在安装MR阻尼器后共振峰频率略微增大。其影响程度比安装油阻尼器时要大。因此MR阻尼器的制振效果除主要来自耗能外,还有部分来自调频作用。 相似文献
15.
高架桥梁地震响应模糊半主动控制 总被引：3，自引：0，他引：3
陈水生 《地震工程与工程振动》2005,25(6):165-171
提出了使用MR阻尼器（Magnetorheological Damper）作为控制设备，以模糊集为基础的半主动控制算法，研究了8种模糊控制规则在高架桥梁地震响应中的控制效果。本文提出的模糊方法的优势在于算法自身的鲁棒性、处理非线性问题的能力和不需要结构的精确数学模型，算法需要的输入变量少，模糊算法的输出直接控制MR阻尼器的输入电压，与LQR-clipped算法不同，MR阻尼器的输入电压可以是零与最大值之间的任意值。根据高架桥梁的结构特点，将典型的墩-支座-桥面结构简化为一个两自由度的线性系统，计算了El Centro地震激励下，MR模糊半主动控制的地震响应，并分别与没有控制及其他控制时的地震响应进行了对比，分析了各种控制算法的控制效果。研究结果表明，MR模糊半主动控制算法可以达到LQR-clipped半主动的控制效果，且模糊控制所需要的控制力较小，为有效地发挥MR阻尼器的功能提供了一种简单的半主动算法。 相似文献
16.
工程结构地震响应模糊半主动控制 总被引：3，自引：1，他引：2
提出了使用MR阻尼器（Magnetorheological Damper）作为控制设备,模糊集为基础的半主动控制算法,并运用提出的算法对土木工程结构地震响应进行了振动控制分析.本文方法的优势在于算法自身的鲁棒性、处理非线性问题的能力和不需要结构的精确数学模型,算法需要的输入变量少,可以解决实际工程中结构响应信息难以测量的困难.模糊算法的输出直接控制MR阻尼器的输入电压,控制器的计算非常简单且易于在工程中实现.本文以一个3层框架结构为算例,分析了本文算法与前人研究算法的异同.数值结果表明,本文提出的模糊半主动控制具有较高的效率,可以减小需要的控制力,充分使用了MR阻尼器的输入电压可以调节的功能,使MR阻尼器的功能得到了更好的发挥. 相似文献
17.
A magneto‐rheological (MR) damper is a semi‐active device where the damper force capacity is controlled by varying the input current into the damper. In this paper, the dynamics of MR dampers associated with variable current input is studied. Electromagnetic theory is used to model the dynamics of an MR damper including the eddy current effect and the nonlinear hysteretic behavior of damper material magnetization. A nonlinear differential equation that relates the input current to the damper with a constant equivalent current is proposed. The nonlinear differential equation is combined with the Maxwell Nonlinear Slider (MNS) model to create the variable current MNS model to predict the damper force under variable input current and random damper displacement loading. The model is evaluated by comparing the predicted response of a large‐scale MR damper to the measured damper response from experiments. The experiments include a real‐time hybrid simulation of a 3‐story building structure with a large‐scale MR damper subjected to the design earthquake. The exceptional agreement observed between the predicted and experimental results illustrate the robustness and the accuracy of the variable current MNS model. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
18.
磁流变阻尼器在受控结构中的优化布置 总被引：4，自引：0，他引：4
高层建筑结构中由于地震引起的结构体系的振动是十分严重的,利用磁流变阻尼器进行振动控制的方法可以有效减小体系的振动反应、这种振动控制的效果,不仅取决于阻尼器出力大小和控制算法的优化,也取决于阻尼器在高层结构中的布置位置。首先对近年来出现的许多优化布置方法进行了阐述,论述了这些方法的优缺点,然后选用了一种优化布置方法并结合一个结构体系进行了阻尼器的优化布置研究,最后给出了阻尼器优化布置的几个原则。研究的结果表明通过阻尼器在高层结构中的优化布置可以有效提高振动控制的效果． 相似文献
19.
A two‐step direct method for estimating the seismic response of nonlinear structures equipped with nonlinear viscous dampers 
下载免费PDF全文
下载免费PDF全文 The insertion of fluid viscous dampers in building structures is an innovative technology that can improve significantly the seismic response. These devices could be very useful also in the retrofit of existing buildings. The effect of this typology of damping system is usually identified with an equivalent supplemental damping ratio, which depends on the maximum displacement of the structure, so that iterative procedures are required. In this paper, a simplified direct assessment method for nonlinear structures equipped with nonlinear fluid viscous dampers is proposed. The method proposed in this study is composed by two steps. The first one yields the direct estimate of the supplemental damping ratio provided by nonlinear viscous dampers in presence of a linear elastic structural response. The second step extends the procedure to structures with nonlinear behavior. Both graphical and analytical approaches have been developed. The proposed method has then been verified through several applications and comparisons with nonlinear dynamic analyses. Moreover, an investigation has been performed with regard to the influence of the relations that define the damping reduction factor and the hysteretic damping. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献