首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 267 毫秒
1.
《Geodinamica Acta》2000,13(2-3):67-85
The structure of western Provence (SE France) is the result of successive deformations connected to the building of the Pyrenees and the Alps. It is a seismically active region still undergoing deformation. The aim of this study is to characterize the recent deformation in western Provence and to integrate the cumulated displacements in a coherent deformation model. In order to do this, we identified the recent structures that concentrate the deformation. We used the Miocene as a sedimentary marker to estimate the discontinuous deformation over the last 20 Ma and geomorphic surfaces to evaluate the amount of the post-Miocene deformation. Miocene terrains are deformed along south-vergent thrusts such as Le Luberon, Les Costes, La Trévaresse or Les Alpilles, and along sinistral strike-slip faults such as the Durance and Nîmes faults. North-vergent Pyrenean thrusts such as L’Étoile-Sainte Baume, Sainte Victoire or the Eguilles thrusts were not reactivated during the Alpine phase. Field evidence shows that in the Luberon, the main folding phase occurred during, or immediately after the Burdigalian (20.5–16 Ma). The shortening measured on a regional N–S cross-section is of a few kilometres, implying a deformation of 0.1–0.2 mm·year–1 since the beginning of the Miocene. Geomorphic surfaces have been reported on cross-sections of the E–W thrusts. The intensity of the deformation decreases southward and through time during the Miocene. Pliocene surfaces are not deformed near the active structures, except at the front of the Digne thrust. Furthermore, Quaternary geomorphic markers such as alluvial fans are not affected by the Durance strike-slip fault. Our results show that from Miocene to the Present, Provence was not intensively deformed (0.1–0.2 mm·year–1), and occurred in a short period of time during the Miocene. It is coherent with the southward emplacement of the Alpine Digne thrust being the cause of this deformation. Since the end of the Miocene, there have been no major displacements on any of the active structures.  相似文献   

2.
The Variscan Belt in western Europe shows an arcuate geometry that is usually named Ibero-Armorican Arc. The nucleus of this arc, known as the Asturian Arc, comprises the Cantabrian Zone which is a foreland fold and thrust belt. The Trubia River area is located in the inflexion zone of the Asturian Arc, which is a strategic structural position for unraveling the geometry and kinematics of the Variscan thrust sheets and related folds. Geological mapping, construction of stratigraphic and structural cross sections, analysis of kinematic indicators, and estimate of shortening for each cross section have been carried out. This area consists of two major antiform-synform pairs related to two imbricate thrust systems. These folds are asymmetric, tight, and their axial traces follow the trend of the Asturian Arc. They have been interpreted as fault-propagation folds. The emplacement directions measured in the Trubia River area change from north to south and converge towards the core of the Asturian Arc. The minimum shortening estimated ranges between 16.4 and 17.6 km, which corresponds to 56.9 and 59.4%. The complex cross-cutting relationships between folds and thrusts suggest that, in general, the different structural units followed a forward-breaking sequence of emplacement, with some breaching and a few out-of-sequence thrusts. The analysis of the transport vectors together with the disposition of the fold axes and post-thrusting faults that deform the thrust stack are evidence of a late deformation event that is partially or totally responsible for the arcuate form of the Asturian Arc. The timing of the Asturian Arc, amount of shortening, and sequence of emplacement of the structures are in accordance with previous regional studies of the Cantabrian Zone.  相似文献   

3.
Balanced and restored cross-sections through the central and eastern Pyrenees, constructed using both surface and borehole data, demonstrate the presence of c.18km of shortening above a flat lying N-directed Alpine décollement surface. Hangingwall diagrams show how the North Pyrenean satellite massifs are culminations within this thrust system. Pre-thrusting structures such as subhorizontal stretching lineations in the North Pyrenean Fault zone became rotated above these culminations as the North Pyrenean Fault was cut by Alpine thrusts. Stratigraphic evidence demonstrates that N-directed thrust movements occurred between mid Eocene and Oligocene time, and this is similar to the age of major S-directed thrust movements on the south side of the Axial Zone. The N-directed thrust system probably originated as a series of backthrusts to the dominant S-directed structures.  相似文献   

4.
Abstract

The structure of the Pyrenean pre-Hercynian rocks involved in the “Axial Zone” antiformal stack, results from the association of Hercynian cleavage-related folds and Hercynian and Alpine thrusts. Some of these Alpine and Hercynian thrusts separate thrust sheets in which Upper Paleozoic rocks, Devonian and pre-Hercynian Carboniferous, exhibit different lithostratigraphy and internal structure.

In order to know both, the original Devonian facies distribution and the structural characteristics, the effects of the Alpine and the Hercynian thrusts must be considered. If a conceptual restored cross-section is constructed taking into account both the Alpine and Hercynian thrusts, a different Devonian facies distribution is achieved. Devonian carbonatic successions were originally located in a northernmost position, whereas sequences made by alternations of slates and limestones lie in southernmost areas. Moreover, a N-S variation of the Hercynian structural style appears. In the northern units thrusts are synchronous to folding development and they are the most conspicuous structures. In the intermediate units, thrust postdate cleavage-related folds, and in the southernmost units several folding episodes, previous to the thrusts, are well developed.

We present some examples which enable us to discuss the importance of the Hercynian and Alpine thrusts in the reconstruction of the Pyrenean pre-Alpine geology.  相似文献   

5.
The Mont Blanc massif is one of a chain of basement culminations which crop out along the external French Alps. Its southwestern margin is interpreted as being a major thrust belt which propagated in a piggy-back sequence towards the foreland. These imbricates have developed in the footwall of the high-level Valais thrust. The depth to the floor thrust and shortening within imbricates above this thrust are estimated by a series of partially balanced cross-sections drawn between the ‘synclinal median’ and the Valais thrust. These sections restore to a pre-thrust length of at least 50 km, probably exceeding 100 km, above a floor thrust never deeper than 1 km below the sub-Triassic unconformity. All this thrust displacement is transferred via a series of lateral branch lines onto the Mont Blanc thrust in the Chamonix area. A corollary of this is that the Aiguilles Rouges and the main part of the Mont Blanc massif were separated by probably as much as 100 km prior to Alpine thrusting. Such large shortening estimates imply a hitherto unsuspected Dauphinois stratigraphic consistency in both thickness and lithology.To achieve a balance a restored crustal cross-section must show an equal length of both lower and upper crust. Thus a high-level basal detachment which floors large thrust displacements must overlie a long, undeformed lower crustal wedge. A restored section 100 km long requires such a lower crustal wedge to exist beneath the entire Alpine internal zones. Perrier & Vialon's crustal velocity profile through the western Alps is reinterpreted in these terms. The Ivrea body is considered to be a portion of an external lower crustal wedge which has been uplifted by thrusts after most of the displacement on the external thrust belt.  相似文献   

6.
Abstract

Positive structural inversion involves the uplift of rocks on the hanging-walls of faults, by dip slip or oblique slip movements. Controlling factors include the strike and dip of the earlier normal faults, the type of normal faults — whether they were listric or rotated blocks, the time lapsed since extension and the amount of contraction relative to extension. Steeply dipping faults are difficult to invert by dip slip movements; they form buttresses to displacement on both cover detachments and on deeper level but gently inclined basement faults. The decrease in displacement on the hanging-walls of such steep buttresses leads to the generation of layer parallel shortening, gentle to tight folds — depending on the amount of contractional displacement, back-folds and back-thrust systems, and short-cut thrust geometries — where the contractional fault slices across the footwall of the earlier normal fault to enclose a “floating horse”. However, early steeply dipping normal faults readily form oblique to strike slip inversion structures and often tramline the subsequent shortening into particular directions.

Examples are given from the strongly inverted structures of the western Alps and the weakly inverted structures of the Alpine foreland. Extensional faulting developed during the Triassic to Jurassic, during the initial opening of the central Atlantic, while the main phases of inversion date from the end Cretaceous when spreading began in the north Atlantic and there was a change of relative motion between Europe and Africa. During the mid-Tertiary well over 100 km of Alpine shortening took place; Alpine thrusts, often detached along, or close to, the basement-cover interface, stacking the late Jurassic to Cretaceous sediments of the post-extensional subsidence phase. These high level detachments were joined and breached by lower level faults in the basement which, in the external zones of the western Alps, generally reactivated and rotated the earlier east dipping half-graben bounding faults. The external massifs are essentially uplifted half-graben blocks. There was more reactivation and stacking of basement sheets in the eastern part of this external zone, where the faults had been rotated into more gentle dips above a shallower extensional detachment than on the steeper faults to the west.

There is no direct relationship between the weaker inversion of the Alpine foreland and the major orogenic contraction of the western Alps; the inversion structures of southern Britain and the Channel were separated from the Alps by a zone of rifting from late Eocene to Miocene which affected the Rhone, Bresse and Rhine regions. Though they relate to the same plate movements which formed the Alps, the weaker inversion structures must have been generated by within plate stresses, or from those emanating from the Atlantic rather than the Tethyan margin.  相似文献   

7.
The Phanerozoic geodynamic evolution of Europe is reviewed for the purpose of identifying its bearing on the petrogenesis of the Cenozoic European Volcanic Province. Several events capable of modifying the chemistry and mineralogy of the mantle, such as subduction of oceanic crust, continent-continent collision, and ocean formation are emphasized. The area now occupied by the Mediterranean Sea and, in general, all of Europe, underwent a complex geodynamic evolution, involving large relative crustal movements. The Paleozoic to Recent evolution of the circum-Mediterranean Sea area can be summarized as follows: (1) extension during the Precambrian (presence of ～3000 to 4000 km wide oceanic crust between Laurussia (consisting of the Laurentian and Baltica-Fenno-scandian cratons) and Gondwana (South America, Africa, Australia, India, and Antarctica); (2) collisional movements with the formation of “Andean-type” margins during the Late Precambrian to Middle Paleozoic, followed by “Himalayan-type” margins during the Carboniferous (Hercynian orogeny sensu stricto); (3) change of plate movements and development of tensional (transtensive) stresses at the end of the Paleozoic, as indicated by the formation of the North Atlantic-Tethys rift system, with the Cretaceous formation of the Ligurian-Piedmontese and the Mesogean Ocean; (4) the Alpine orogeny, with a two-stage compressive cycle-(a) Eoalpine (Paleogene closure of the Ligurian-Piedmontese Ocean; formation of the Betic Cordillera, western-northern Alps, and Carpatho-Balkan Arc), with Europe-verging thrusts; and (b) Neoalpine (Neogene-Pleistocene formation of the Apennine, Maghrebide, Dinaride, and Hellenide chains, plus the backthrusted southern Alps, all with African vergence; opening of two diachronous backarc basins-the Ligurian-Provencal Basin and the Tyrrhenian Sea-in the western Mediterranean). Hercynian-age modifications (the most important of which are subduction-related) led to almost unique isotopic ratios, such as low 143Nd/144Nd, 206Pb/204Pb, 3He/4He, and slightly radiogenic 87Sr/86Sr ratios.

During the Cenozoic and Quaternary, widespread magmatic activity developed throughout Europe. These products, mainly represented by mildly to strongly alkaline rocks with sodic affinity and tholeiitic mafic rocks (basanite, alkali basalts, tholeiitic basalts), show quite uniform geochemical and isotopic compositions typical of a within-plate tectonic setting. Moreover, subduction-related magmatism (mainly represented by low-to high-K calc-alkaline and shoshonitic series + ultrapotassic rocks such as lamproites) developed in response to the subduction systems of the Alpine orogeny. With respect to the circum-Italian realm, the igneous rocks emplaced during the last 30 Ma are essentially related to the Alpine orogeny. This activity is represented by rocks of extremely variable composition (alkaline-both sodic and potassic to ultrapotassic-and subalkaline [tholeiitic and calc-alkaline]) and probably carbonatitic.  相似文献   

8.
Modelling of gravity data taken across the Kohistan Island-Arc terrane in northern Pakistan can be used to constrain the shape and thickness of the Arc.Over 600 new gravity measurements were made across the Kohistan Island-Arc terrane in northern Pakistan. These data were taken along traverses normal to the structures bounding the Arc and were reduced to terrain-corrected Bouguer values. The reduced data were then modelled using standard two-dimensional modelling techniques.The southern margin of the Arc, the Main Mantle Thrust (MMT), dips to the north at approximately 45° and gradually flattens out at a depth of 7–9 km. The northern margin of the Arc, the Main Karkoram Thrust (MKT), also dips towards the north, but at a shallower initial angle (15°). From the models, the Arc terrane now appears to be around 7–9 km thick with the thicker sections occurring closer to the southern margin.The proposed model, in particular the angle of the MMT and the MKT, may have been significantly affected by the recent and rapid uplift that is occurring along the Nanga Parbat-Haramosh Massif.  相似文献   

9.
The metamorphic rocks of Timor are reinterpreted in the light of reconnaissance mapping of the whole island. All metamorphic rocks that crop out in Timor are allochthonous. Several metamorphic massifs are reported for the first time, the outline of others is revised. On the basis of their grade, three distinct groups can be mapped: lustrous slate, amphibolite-serpentinite, and a granulite-amphibolite-greenschist complex. Each group has distinctive structural relations to other allochthonous elements. The granulite facies meta-anorthosite in Timor must have originated near the boundary between the continental mantle and the crust. These and related high-grade metamorphic rocks may represent slices of an ancient Asian continental basement. These rocks imply that the history of the Mesozoic-Cinozoic fold belt of the Outer Banda Arc extends into the Precambrian Era. The metamorphic rocks of Seram appear to be remarkably similar to those of Timor in grade, distribution and structural relations. The overthrust directions of the metamorphic rocks in Timor is southwards, in Seram it is northwards. As the islands are separated by the 4–5 km deep Banda Sea, these directly opposite thrusts may be explained in terms of the Banda Arc acquiring its sinuosity after the emplacement of the metamorphic rocks.  相似文献   

10.
The Northern Calcareous Alps (NCA) are the site of very large top-to-north convergent movements during Cretaceous–Tertiary Alpine mountain building. To determine the amount of shortening, the depth of detachment and the style of deformation, we retro-deformed an approximately 40 × 40 km area comprising the Lechtal and Allgäu Nappes. On the basis of all available geological data and processed sections of the TRANSALP reflection seismic experiment, coherent 3D models were constructed by splining lines from N–S cross-sections. Integration of 3D kinematic modeling and field data shows the following. The structure of the Lechtal Nappe is controlled by the Triassic Hauptdolomit. Four main thrusts link to a detachment at 2–6 km depth below sea level. Shortening estimates vary, from 25% (east) to 42% (west). Additional contraction is accommodated by folding. In the east the subjacent Allgäu Nappe can be traced about 10 km down-plunge, and is shortened by about one third. In the western part the downplunge width is at least 15–20 km, with restorable shortening of one third. The triple (Inntal, Lechtal, Allgäu Nappes) NCA nappe system was moved uniformly N–S to produce laterally heterogeneus shortening of 40–90 km or 50–67%. We suggest that the NCA are underlain by substantial amounts of buried Molasse sediments and/or overthrust units of Helvetic and Rheno-Danubian Flysch, indicating post-Eocene N–S shortening of at least 55 km. Restored to an initial configuration, the basin topography of the NCA reveals strong E–W thickness variations of the Triassic Wettersteinkalk and Hauptdolomit platform carbonates. Such variations may pertain to N–S trending growth faults, which were important precursors to later Jurassic extension of the Austroalpine passive margin. Such structures are unlikely to be seen in the conventional N–S cross-sections, but form an essential geometrical and mechanical element in later, convergent mountain building.  相似文献   

11.
This study is the first integrated geological and geophysical investigation of the Hidaka Collision Zone in southern Central Hokkaido, Japan, which shows complex collision tectonics with a westward vergence. The Hidaka Collision Zone consists of the Idon'nappu Belt (IB), the Poroshiri Ophiolite Belt (POB) and the Hidaka Metamorphic Belt (HMB) with the Hidaka Belt from west to east. The POB (metamorphosed ophiolites) is overthrust by the HMB (steeply eastward-dipping palaeo-arc crust) along the Hidaka Main Thrust (HMT), and in turn, thrusts over the Idon'nappu Belt (melanges) along the Hidaka Western Thrust (HWT). Seismic reflection and gravity surveys along a 20-km-long traverse across the southern Hidaka Mountains revealed hitherto unknown crustal structures of the collision zone such as listric thrusts, back thrusts, frontal thrust-and-fold structures, and duplex structures. The main findings are as follows. (1) The HMT, which dips steeply at the surface, is a listric fault dipping gently at a depth of 7 km beneath the eastern end of the HMB, and cutting across the lithological boundaries and schistosity of the Hidaka metamorphic rocks. (2) A second reflector is detected 1 km below the HMT reflector. The intervening part between these two reflectors is inferred to be the POB, which is only little exposed at the surface. This inference is supported by the high positive Bouguer anomalies along the Hidaka Mountains. (3) The shallow portion of the IB at the front of the collision zone has a number of NNE-dipping reflectors, indicative of imbricated fold-and-thrust structures. (4) Subhorizontal reflectors at a depth of 14 km are recognized intermittently at both sides of the seismic profile. These reflectors may correspond to the velocity boundary (5.9–6.6 km/s) previously obtained from seismic refraction profiling in the northern Hidaka Mountains. (5) These crustal structures as well as the back thrust found in the eastern end of the traverse represent characteristics of collisional tectonics resulting from the two collisional events since the Early Tertiary.  相似文献   

12.
A new image of the French continental crust between Brabant (Belgium) and the Basque province of Spain is presented on the basis of considerable recent geological and geophysical information as well as the compilation and reInterprétation of previously available data. The resulting section, which shows the main basement structures to a depth of 45 km, also is the first nonspeculative image of the westernmost part of the Variscan orogen. The French Global Geoscience Transect reveals a complete picture of this orogen between its remnant root and the surface. The divergent thrusts are bounded on the north and in the south by the old Brabant and Ebro-Aquitaine cratons, respectively; these thrusts also involve two previous plate boundaries. The lower part of the orogen is limited by a layered lower crust, probably of Permian age. Near the surface the Hercynian orogen is buried—near the northern end of the transect by the Paris Basin, which can be considered an eastward extension of the English Channel, and in the south by the South Armorican continental margin, which makes a transition between the oceanic crust of the Bay of Biscay and the axis of the Variscan orogen. In this area, the deep Parentis graben is located at the site of pronounced crustal thinning, since only 7 km of Hercynian crust are now preserved.  相似文献   

13.
Three-dimensional modelling tools are used with structural and palaeomagnetic analysis to constrain the tectonic history of part of the Dauphiné zone (external Western Alps). Four compressive events are identified, three of them being older than the latest Oligocene. Deformation D1 consists of W–SW directed folds in the Mesozoic cover of the study area. This event, better recorded in the central and southern Pelvoux massif, could be of Eocene age or older. Deformation D2 induced N-NW-oriented basement thrusting and affected the whole southern Dauphiné basement massifs south of the study area. The main compressional event in the study area (D3) was WNW oriented and occurred before 24 Ma under a thick tectonic load probably of Penninic nappes. The D2-D3 shift corresponds to a rapid transition from northward propagation of the Alpine collision directly driven by Africa-Europe convergence, to the onset of westward escape into the Western Alpine arc. This Oligocene change in the collisional regime is recorded in the whole Alpine realm, and led to the activation of the Insubric line. The last event (D4) is late Miocene in age and coeval with the final uplift of the Grandes Rousses and Belledonne external massifs. It produced strike-slip faulting and local rotations that significantly deformed earlier Alpine folds and thrusts, Tethyan fault blocks and Hercynian structures. 3D modelling of an initially horizontal surface, the interface between basement and Mesozoic cover, highlights large-scale basement involved asymmetric folding that is also detected using structural analysis. Both, Jurassic block faulting and basement fold-and-thrust shortening were strongly dependent on the orientation of Tethyan extension and Alpine shortening relative to the late Hercynian fabric. The latter’s reactivation in response to oblique Jurassic extension produced an en-échelon syn-rift fault pattern, best developed in the western, strongly foliated basement units. Its Alpine reactivation occurred with maximum efficiency during the early stages of lateral escape, with tectonic transport in the overlying units being sub-perpendicular to it.  相似文献   

14.
Recent tomographic investigations performed down to ~300?km depth in the Calabrian Arc region gave insight in favor of the hypothesis that the Ionian subducting slab is continuous in depth beneath the central part of the Arc, while detachment of the deep portion of the subducting structure may have already taken place beneath the edges of the Arc itself. In the present study, we perform new geophysical analyses to further explore the structure of the subduction system and the structure and kinematics of the crustal units in the study area for a more comprehensive view of the local geodynamic scenario. Local earthquake tomography that we address to the exploration of the upper 40?km in the whole region of southern Italy furnishes P-wave velocity domains, suggesting southeast-ward long-term drifting of the southern Tyrrhenian unit with an advancement front matching well with the segment of Calabrian Arc where the subducting slab was found continuous and trench retreat can be presumed to have been active in the most recent times. This scenario of retreating subduction trench inducing drifting of the lithospheric unit overriding the subducting slab is further supported by the analysis of gravity anomalies, allowing us to better constrain the transitional zones between different subduction modes (continuous vs. detached slab) along the Arc. Also, the relocation of recent crustal seismicity, associated with geostructural data taken from the literature, provides evidence for NW-trending seismogenic structures in northeastern Sicily and northern Calabria that we interpret as Subduction-Transform Edge Propagator (STEP) faults guiding the southeast-ward drifting process of the southern Tyrrhenian unit. Crustal earthquake relocations show also seismolineaments in southern Calabria corresponding to the NE-trending longitudinal structures of the Arc where the great shallow earthquakes of 28 December 1908, and 5 and 7 February 1783 occurred. Seismicity and the extensional stress regime detected in these structures find also reasonable location in the proposed scenario, being interpretable in terms of shallow response of the central segment of the Arc to slab rollback and trench retreat.  相似文献   

15.
Orogens and rift zones have a finite number of regional faults. The accretionary prisms analysed here have a number of thrusts < 50, whereas extensional areas have a number of normal faults ranging between six and 44. The average spacing of thrusts is between 5 and 25 km; spacing of normal faults is more restricted into two peaks, at 25–29 km and 4–6 km, in which the latter is the most common. The number and spacing of faults appear to be mainly controlled by the depth of the decollement plane, which seems to be more variable in compressive settings with respect to rift zones. Basement‐involved orogens present fewer and more spaced thrusts; by contrast, a greater number of thrusts with shorter spacing characterize thin‐skinned thrust belts. The shallower the decollement is, the stronger it appears to control the palaeogeography, in the sense of rheological lateral variations in the sedimentary cover.  相似文献   

16.
More than 1400 km of two-dimensional seismic data were used to understand the geometries and structural evolution along the western margin of the Girardot Basin in the Upper Magdalena Valley. Horizons are calibrated against 50 wells and surface geological data (450 km of traverses). At the surface, low-angle dipping Miocene strata cover the central and eastern margins. The western margin is dominated by a series of en echelon synclines that expose Cretaceous–Oligocene strata. Most synclines are NNE–NE trending, whereas bounding thrusts are mainly NS oriented. Syncline margins are associated mostly with west-verging fold belts. These thrusts started deformation as early as the Eocene but were moderately to strongly reactivated during the Andean phase. The Girardot Basin fill records at least four stratigraphic sequences limited by unconformities. Several periods of structural deformation and uplifting and subsidence have affected the area. An early Tertiary deformation event is truncated by an Eocene unconformity along the western margin of the Girardot Basin. An Early Oligocene–Early Miocene folding and faulting event underlies the Miocene unconformity along the northern and eastern margin of the Girardot Basin. Finally, the Late Miocene–Pliocene Andean deformation folds and erodes the strata along the margins of the basin against the Central and Eastern Cordilleras.  相似文献   

17.
In Cap Corse, progressive deformation during Late Cretaceous obduction of the ophiolitic Schistes Lustrés (sensu lato) as a pile of imbricate, lens-shaped units during blueschist facies metamorphism was non-coaxial. Two zones are recognized: a lower series emplaced towards the west is overlain by a series emplaced towards the south-southwest in Cap Corse. Equivalent structures (differing only in orientation) occur in both zones. The change in thrust direction was responsible for local refolding and reorientation of previously formed structures, parallel to the new stretching direction immediately below the thrust contact between the two zones, and within localized shear zones in the underlying series.Both zones are refolded about E-overturned F2 folds trending between 350 and 025°. Local minor E-directed thrusts occur associated with the F2 folds. This second deformation of Middle Eocene age is considered to be related to the backthrusting of an overlying klippe containing gneisses of South Alpine origin, and is followed by a third Late Eocene phase of upright 060°-trending F3 folds accompanied by greenschist facies metamorphism.  相似文献   

18.
The presence of two regional seismic networks in southeastern France provides us high-quality data to investigate upper mantle flow by measuring the splitting of teleseismic shear waves induced by seismic anisotropy. The 10 three-component and broadband stations installed in Corsica, Provence, and western Alps efficiently complete the geographic coverage of anisotropy measurements performed in southern France using temporary experiments deployed on geodynamic targets such as the Pyrenees and the Massif Central. Teleseismic shear waves (mainly SKS and SKKS) are used to determine the splitting parameters: the fast polarization direction and the delay time. Delay times ranging between 1.0 and 1.5 s have been observed at most sites, but some larger delay times, above 2.0 s, have been observed at some stations, such as in northern Alps or Corsica, suggesting the presence of high strain zones in the upper mantle. The azimuths of the fast split shear waves define a simple and smooth pattern, trending homogeneously WNW–ESE in the Nice area and progressively rotating to NW–SE and to NS for stations located further North in the Alps. This pattern is in continuity with the measurements performed in the southern Massif Central and could be related to a large asthenospheric flow induced by the rotation of the Corsica–Sardinia lithospheric block and the retreat of the Apenninic slab. We show that seismic anisotropy nicely maps the route of the slab from the initial rifting phase along the Gulf of Lion (30–22 Ma) to the drifting of the Corsica–Sardinia lithospheric block accompanied by the creation of new oceanic lithosphere in the Liguro–Provençal basin (22–17 Ma). In the external and internal Alps, the pattern of the azimuth of the fast split waves follows the bend of the alpine arc. We propose that the mantle flow beneath this area could be influenced or perhaps controlled by the Alpine deep penetrative structures and that the Alpine lithospheric roots may have deflected part of the horizontal asthenospheric flow around its southernmost tip.  相似文献   

19.
The western Lucretili Mts. in the central Apennines (Latium, Italy) have been recently re-mapped in great detail and are the subject of combined stratigraphic, sedimentological and structural investigations. In this paper, we present a new stratigraphic interpretation of the Jurassic paleogeography of western Lucretili Mts., where a rift-derived intrabasinal paleo-high of the Alpine Tethys has been identified for the first time by means of facies analysis and biostratigraphic dating. Recognised facies associations, combined with dated stratigraphic sections, allow to define the morphology of the structural paleo-high and to identify the associated gravity-driven deposits (olistoliths) accumulated in the surrounding basin. Furthermore, we investigated the modes of interaction between Jurassic extensional structures and the subsequent contractional patterns developed during the Tertiary mountain building. In detail, the role played during Apennines tectonics by the paleo-escarpments bounding the paleo-high and by the surrounding olistoliths has been analysed. The paleo-escarpments either acted as focussing features for ENE-directed frontal thrust ramp localisation and were offset with small shortening amounts or reactivated as NNE striking high angle transpressional faults or preserved the original geometries as a result of variable orientation of paleo-escarpments with respect to the Neogene compressive stress field (with ENE oriented sigma1). Newly formed ENE striking tear faults connect these either inherited or neo-formed discontinuities. This complex stratigraphic and structural pattern is substantially different from the previous interpretations of this portion of the central Apennines based on a hypothesised layer-cake stratigraphy deformed by neo-formed Neogene thrusts. This contribution strengthens the importance of integrating facies analyses and structural investigations to detect the influence of pre-orogenic structures on compressive structural patterns, in an area where commercial seismic lines are not available and cannot help in reconstructing the subsurface geometries.  相似文献   

20.
The Esla tectonic unit lies along the southern boundary of the Cantabrian–Asturian Arc, a highly curved foreland fold-thrust belt that was deformed during the final amalgamation of the Pangea supercontinent. Previous structural and paleomagnetic analyses of the Cantabrian–Asturian Arc suggest a two-stage tectonic history in which an originally linear belt was bent into its present configuration, creating an orocline. The Esla tectonic unit is a particularly complex region due to the interaction of rotating thrust sheets from the southern limb of the arc and the southward-directed thrusts of the Picos de Europa tectonic domain during late-stage north–south shortening and oroclinal bending. These structural interactions resulted in intense modification of early-phase thin-skinned tectonic structures that were previously affected by a deeper out-of-sequence antiformal stack that passively deformed the early thrust stack. A total of 75 paleomagnetic sites were collected from the Portilla and Santa Lucia formations, two carbonate passive-margin reef platform units from the middle Devonian. Similar to other regions of the Cantabrian–Asturian Arc, Esla Unit samples carry a secondary remanent magnetization that was acquired after initial thrusting and folding of Variscan deformation in the late Carboniferous. Protracted deformation during late-stage oroclinal bending caused reactivation of existing thrust sheets that include the Esla and younger Corniero and Valbuena thrusts. When combined with existing structural data and interpretations, these data indicate that the present-day sinuosity of the Esla Unit is the consequence of both secondary rotation of originally linear features in the western Esla exposures (e.g., frontal thrusts), and secondary modification and tightening of originally curvilinear features in the eastern Esla exposures (e.g., hanging-wall lateral/oblique ramps). Differences in structural style between the Esla and other tectonic units of the arc highlight the complex kinematics of oroclinal bending, which at the orogen-scale buckled an originally linear, north–south (in present-day coordinates) trending Cantabrian–Asturian thrust belt during the final stages of Pangea amalgamation.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号