首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 296 毫秒
1.
中国大陆M2波理论应变潮汐模型   总被引:1,自引:0,他引:1       下载免费PDF全文
本文主要研究和讨论了我国大陆固体潮和海潮负荷效应的M2波理论应变潮汐模型。推导了球扇波应变张量大地系数和计算公式,着重研究和计算了M2波海潮应变负荷效应,讨论了计算方法,计算中采用了到目前为止最新的Schwiderski(M2)全球海潮图和沈育疆近中国海潮汐图;给出了40个点的负荷效应结果,并绘制了中国大陆固体应变潮、海潮应变负荷效应同相位,相差π/2相位以及总效应的应变花。为理论研究,观测资料的分析和改正提供了理论参考模型。  相似文献   

2.
采用Green函数方法,高分辨率中国近海区域海潮模型和TOPO7.0全球海洋潮汐模型,以及Gutenberg-BullenA地球模型计算了负荷潮.结果表明,渤、黄、东海M2垂向位移负荷潮振幅最大值出现在浙江外海约150km处,其值超过28mm;次大值位于仁川湾,超过20mm;第三大值位于北黄海东北部,超过14mm.S2垂向位移负荷潮在上述三处的振幅值分别超过10,8和4mm.K1和O1垂向位移负荷潮振幅在琉球群岛中北部附近为最大,分别超过13和10mm:向内海逐渐减小.半日分潮垂向位移负荷潮基本上与海洋潮汐对应分潮具有相反的位相.在东海大部和南黄海东部全日分潮垂向位移负荷潮与对应的海潮分潮基本上具有反位相的关系,而在渤、黄海其余海域基本上不具有反位相关系.在研究海区内,全日潮的垂向位移负荷潮不出现无潮点.自吸-负荷平衡潮分布特征与垂向位移负荷潮相近,其振幅大约是垂向位移负荷潮的1.2~1.7倍,其位相与垂向位移负荷潮基本上相反.M2最大振幅值也出现在浙江外海,超过42mm.  相似文献   

3.
采用引潮势和海潮潮族作为输入函数,对北京实测的重力潮汐进行了响应分析,将频率相同的引潮力产生的重力天文(引力)潮和海洋潮汐负荷效应产生的重力负荷潮分离开.再对重力天文潮和负荷潮进行调和分析,得到北京重力天文潮和负荷潮的平均变幅分别为121.5和7.5微伽.海洋潮汐的负荷影响为北京重力天文潮的6.2%.  相似文献   

4.
本文探讨重力海洋负荷潮的计算方法,比较三种不同的 M2海潮共潮图的计算结果,给出中国内陆及京津唐张地区重力负荷潮 M2、K1分潮的地理分布图.   相似文献   

5.
热带气旋能在短期内造成海水和大气质量的重新分布,使得近海地表受力发生变化,进而产生非潮汐负荷形变,对现今高精度大地测量的影响已不容忽视.为了保证空间大地测量结果的精度和稳定性,热带气旋引起的地表形变必须进行有效的估计.因此本文联合NOS、GLOSS验潮站数据与海潮模型,通过获取非潮汐残余量分析了热带气旋“MATTHEW”引起的风暴潮.利用ECCO海洋环流模型、ERAin大气再分析模型、HUGO-m海洋动力学模型,分别估计了“MATTHEW”引起非潮汐海洋负荷、非潮汐大气负荷、动力学响应下非潮汐海洋负荷对地表位移的影响,结果表明热带气旋影响下的广大区域地表都不同程度受到非潮汐负荷的作用,最大位移分别达到-9.13 mm、3.31 mm、-6.11 mm,并且加入动力学响应的非潮汐海洋负荷要普遍大于IB(Inverted Barometer)响应下的结果.在对比不同位置站点所受负荷差异时,发现“大陆站”非潮汐海洋负荷形变普遍大于“岛屿站”,而“岛屿站”更易受非潮汐大气负荷的影响.  相似文献   

6.
本文利用计算应变负荷潮的积分Green函数方法,计算了全球Schwiderski海潮模型M_2分波在中国大陆产生的应变负荷潮.根据负荷潮的分布特点,中国大陆大致可以分成以东经100°为界的东、西两个区域.在东区,负荷潮主要受太平洋海潮的控制;在西部内陆地区,除太平洋海潮外,它们还明显地受印度洋海潮的影响.根据本文计算结果绘制的M_2分波应变负荷潮在中国大陆的地理分布图,为如何正确考虑M_2分波负荷潮对应变固体潮观测结果的影响提供了重要的参考资料.  相似文献   

7.
黄石台ORBES-81型伸缩仪观测结果的调和分析及海潮改正   总被引:1,自引:1,他引:1  
本文对黄石台ORBES-81型石英伸缩仪的应变固体潮观测资料作了分析计算,其调和分析结果为:对O_1波,振幅因子0.4219,相位滞后6°36';对M_2波,振幅因子0.4256,相位滞后-4°42'.同时,讨论了海潮引起的负荷潮汐应变的改正问题.模拟计算发现负荷潮汐应变与体潮应变大致为同一量级,文中列出了海潮改正后的结果,并作了讨论.最后,对黄石台伸缩仪的架设方位作了评价.  相似文献   

8.
本文对黄石台ORBES-81型石英伸缩仪的应变固体潮观测资料作了分析计算,其调和分析结果为:对O1波,振幅因子0.4219,相位滞后6°36';对M2波,振幅因子0.4256,相位滞后-4°42'.同时,讨论了海潮引起的负荷潮汐应变的改正问题.模拟计算发现负荷潮汐应变与体潮应变大致为同一量级,文中列出了海潮改正后的结果,并作了讨论.最后,对黄石台伸缩仪的架设方位作了评价.  相似文献   

9.
大量计算工作表明,负荷效应计算精度主要取决于: 1.海洋潮汐模型,特别是主波的精度; 2.地壳及上地幔结构模型的选择;  相似文献   

10.
吴庆鹏  朱文璐 《地震学报》1992,14(4):485-492
根据 Schwiderski 海潮图,利用笔者提出的计算应变负荷潮的积分 Green 函数方法,计算了全球海潮 K1分波在中国大陆产生的应变负荷潮,并在此基础上绘制了负荷潮诸分量在中国大陆的分布图.在中国大陆东部地区,K1分波应变负荷潮主要受太平洋海潮的控制.在广东、广西南部沿海地区,它们明显受南海海潮的影响;在西部地区,除太平洋海潮外,负荷潮还显著受印度洋海潮的影响.在东部沿海地区,K1分波应变负荷潮的振幅可达固体潮振幅的15%-50%,在西部内陆地区亦可达百分之几.因而,在解释 K1分波应变固体潮在中国大陆的观测结果时,必须考虑负荷潮的影响.   相似文献   

11.
Traditionally, ocean tides have been modeled in frequency domain with a forcing from selected tidal constituents. It is a natural approach; however, it implicitly neglects non-linearities of ocean dynamics. An alternative approach is time-domain modeling with a forcing given by the full lunisolar potential, i.e., all tidal waves are a priori included. This approach has been applied in several ocean tide models; however, some challenging tasks still remain, for example, assimilation of satellite altimetry data. In this paper, we introduce the assimilative scheme applicable in a time-domain model, which is an alternative to existing techniques used in assimilative ocean tide models. We present results from DEBOT, a global barotropic ocean tide model, which has two modes: DEBOT-h, a purely hydrodynamical mode, and DEBOT-a, an assimilative mode. The accuracy of DEBOT in both modes is assessed through a series of tests against tide gauge data which demonstrate that DEBOT is comparable to state-of-the-art global ocean tide models for major tidal constituents. Furthermore, as signals of all tidal frequencies are included in DEBOT, we also discuss modeling of minor tidal constituents and non-linear compound tides. Our modeling approach can be useful for those applications where the frequency domain approach is not suitable.  相似文献   

12.
上海佘山压容式钻孔应变仪观测资料的调和分析   总被引:2,自引:0,他引:2       下载免费PDF全文
对安装在上海佘山地震台的YRZ-2型压容式钻孔应变仪的观测资料分别进行了未经海潮改正和经过海潮改正的调和分析计算。结果表明:(1)各主要半日波的勒甫数l2与根据Gutenberg-Bullen地球模型A计算而得到的结果接近;(2)各主要日波的勒甫数l2较半日波明显地小,这可能是传感器和井壁之间的耦合状况以及整个观测系统的频响特征所致;(3)在上海,海潮负荷引起的应变效应在数值上与起潮力直接引起的应变效应相当,经海潮改正后,计算结果的精度有显著提高。   相似文献   

13.
中国大陆精密重力潮汐改正模型   总被引:12,自引:4,他引:8       下载免费PDF全文
利用理论和实验重力固体潮模型,充分考虑全球海潮和中国近海潮汐的负荷效应,建立了中国大陆的精密重力潮汐改正模型.结果表明,采用不同的固体潮模型会对重力潮汐结果产生相对变化幅度小于0.06%的差异;在沿海地区海潮负荷的影响约为整个潮汐的4%,而中部地区约为1%,其中中国近海潮汐模型的影响约占整个海潮负荷的10%,内插或外推潮波的负荷约占海潮负荷的3%.通过比较实测的重力数据表明,本文给出的重力潮汐改正模型的精度远远优于0.5×10-8 m·s-2,说明了本文构建的模型的实用性,可为中国大陆高精度重力测量提供有效参考和精密的改正模型.  相似文献   

14.
武汉台重力潮汐长期观测结果   总被引:5,自引:1,他引:4       下载免费PDF全文
采用武汉台超导重力仪(SG C032)14年多的长期连续观测资料,研究了固体地球对二阶和三阶引潮力的响应特征,精密测定了重力潮汐参数,系统研究了最新的固体潮模型和海潮模型在中国大陆的有效性.采用最新的8个全球海潮模型计算了海潮负荷效应,从武汉台SG C032的观测中成功分离出63个2阶潮汐波群和15个3阶潮汐波群信号,3阶潮波涵盖了周日、半日和1/3日三个频段.重力潮汐观测的精度非常高,标准偏差达到1.116 nm·s-2,系统反映了非流体静力平衡、非弹性地球对2阶和3阶引潮力的响应特征.结果表明,现有的武汉国际重力潮汐基准在半日频段非常精确,但在周日频段存在比较明显的偏差,需要进一步精化.对于中国大陆的大地测量观测,固体潮可以采用Dehant等考虑地球内部介质非弹性和非流体静力平衡建立的固体潮理论模型或Xu 等基于全球SG观测建立的重力潮汐全球实验模型作为参考和改正模型,海潮负荷效应应该采用Nao99作为改正模型.  相似文献   

15.
Theoretical understanding of the earth's atmosphere is not possible without accounting for tidal waves and their interactions. In the thermosphere, tides represent the dominant motion system. Current observational efforts are aimed at providing tidal morphologies, i.e., maps of the vertical profiles of the tidal fields as a function of time for various locations. These are in hand for the mesosphere and have proved extraordinarily useful in deriving appropriate inputs for numerical models of the thermosphere. The basic latitudinal, seasonal, and solar cycle variation of the tides in the thermosphere is much less well known but the advent of coordinated global multi-day campaigns promises to ameliorate the situation. Progress would be facilitated by agreement on a standard data reduction procedure. Theoretical efforts are focused on simulating the observed morphologies and understanding the day to day variations while investigating mutual interactions and feedback between the mean atmosphere and the tidal, gravity, and planetary waves.  相似文献   

16.
中国东西重力潮汐剖面   总被引:5,自引:0,他引:5       下载免费PDF全文
为了检验体潮与海潮的理论模型,分析了中国东西重力潮汐剖面(1981年9月-1985年1月)。同时,为研究LaCoste ET-20和ET-21重力仪的格值系统,建立了一条由17台LaCoste G型和2台LaCoste D型重力仪观测的重力垂直基线。在基线上标定的结果表明,ET-21重力仪的格值大了1%。由标定得到的格值计算剖面上各测站的潮汐因子,经海潮改正后,接近Wahr模型值,振幅因子的残差:O1波小于0.3μGal,M2波小于0.4μGal。但是上海和拉萨的观测经海潮改正后,相位迟后有很大的改善,振幅因子却更偏离于模型值,其潮汐异常主要是近海的海潮模型不完善,以及在海潮计算中,所采用的地球模型未考虑地壳与上地幔的横向不均匀性所引起。  相似文献   

17.
《Journal of Geodynamics》2009,47(3-5):78-89
We analyzed gravity data obtained in Juneau and global positioning system (GPS) data obtained from three PBO sites in southeastern Alaska (SE-AK), which are part of a US research facility called ‘EarthScope’, and we compared the obtained tidal amplitudes and phases with those estimated from the predicted tides including both effects of the body tide and ocean tide. Global tide models predict the ocean tides in this region of complex coastline and bathymetry. To improve the accuracy of prediction, we developed a regional ocean tide model in SE-AK.Our comparison results suggest: (1) by taking into account the ocean tide effect, the amplitude differences between the observation and the predicted body tide is remarkably reduced for both the gravity and displacement (e.g. for the M2 constituent, 8.5–0.3 μGal, and 2.4–0.1 cm at the AB50 GPS site in Juneau in terms of the vector sum of three components of the north–south, east–west and up–down), even though the ocean tide loading is large in SE-AK. (2) We have confirmed the precise point positioning (PPP) method, which was used to extract the tidal signals from the original GPS time series, works well to recover the tidal signals. Although the GPS analysis results still contain noise due to the atmosphere and multipath, we may conclude that the GPS observation surely detects the tidal signals with the sub-centimeter accuracy or better for some of the tidal constituents. (3) In order to increase the accuracy of the tidal prediction in SE-AK, it is indispensable to improve the regional ocean tide model developed in this study, especially for the phase.  相似文献   

18.
We analyzed gravity data obtained in Juneau and global positioning system (GPS) data obtained from three PBO sites in southeastern Alaska (SE-AK), which are part of a US research facility called ‘EarthScope’, and we compared the obtained tidal amplitudes and phases with those estimated from the predicted tides including both effects of the body tide and ocean tide. Global tide models predict the ocean tides in this region of complex coastline and bathymetry. To improve the accuracy of prediction, we developed a regional ocean tide model in SE-AK.Our comparison results suggest: (1) by taking into account the ocean tide effect, the amplitude differences between the observation and the predicted body tide is remarkably reduced for both the gravity and displacement (e.g. for the M2 constituent, 8.5–0.3 μGal, and 2.4–0.1 cm at the AB50 GPS site in Juneau in terms of the vector sum of three components of the north–south, east–west and up–down), even though the ocean tide loading is large in SE-AK. (2) We have confirmed the precise point positioning (PPP) method, which was used to extract the tidal signals from the original GPS time series, works well to recover the tidal signals. Although the GPS analysis results still contain noise due to the atmosphere and multipath, we may conclude that the GPS observation surely detects the tidal signals with the sub-centimeter accuracy or better for some of the tidal constituents. (3) In order to increase the accuracy of the tidal prediction in SE-AK, it is indispensable to improve the regional ocean tide model developed in this study, especially for the phase.  相似文献   

19.
A knowledge of the vertical component of the oceanic tidal load to a precision of at least one microgal is essential for the geophysical exploitation of the high-precision absolute and differential gravity measurements which are being made at ground level and in deep boreholes. On the other hand the ocean load and attraction signal contained in Earth tide gravity measurements can be extracted with a precision which is sufficient to characterize the behaviour of the oceanic tides in different basins and this provides a check of the validity of the presently proposed cotidal maps. The tidal gravity profiles made since 1971 from Europe to Polynesia, through East Africa, Asia and Australia, with correctly intercalibrated gravimeters, comprise information from 91 tidal gravity stations which is used in this paper with this goal in mind.A discussion of all possible sources of error is presented which shows that at the level of 0.5 μgal the observed effects cannot be ascribed to computational or instrumental errors. Cotidal maps which generate computed loads in agreement with the Earth tide gravity measurements over a sufficiently broad area can be used with confidence as a working standard to apply tidal corrections to high-precision measurements made by using new techniques in geodesy, geophysics and geodynamics, satellite altimetry, very long baseline interferometry, Moon and satellite laser ranging and absolute gravity. The recent cotidal maps calculated by Schwiderski for satellite altimetry reductions agree very well with land-based gravimeter observations of the diurnal components of the tides (O1, K1 and P1 waves) but his semi-diurnal component maps (M2, S2 and N2 waves) strangely appear less satisfactory in some large areas. The maps of Hendershott and Parke give good results in several large areas but not everywhere. More detailed investigations are needed not only for several coastal stations but mainly in the Himalayas.  相似文献   

20.
The tides and tidal energetics in the Indonesian seas are simulated using a three-dimensional finite volume coastal ocean model. The high-resolution coastline-fitted model is configured to better resolve the hydrodynamic processes around the numerous barrier islands. A large model domain is adopted to minimize the uncertainty adjacent to open boundaries. The model results with elevation assimilation based on a simple nudge scheme faithfully reproduced the general features of the barotropic tides in the Indonesian Seas. The mean root-mean-square errors between the observed and simulated tidal constants are 2.3, 1.1, 2.4, and 1.5 cm for M2, S2, K1, and O1, respectively. Analysis of the model solutions indicates that the semidiurnal tides in the Indonesian Seas are primarily dominated by the Indian Ocean, whereas the diurnal tides in this region are mainly influenced by the Pacific Ocean, which is consistent with previous studies. Examinations of tidal energy transport reveal that the tidal energy for both of the simulated tidal constituents are transported from the Indian Ocean into the IS mainly through the Lombok Strait and the Timor Sea, whereas only M2 energy enters the Banda Sea and continues northward. The tidal energy dissipates the most in the passages on both sides of Timor Island, with the maximum M2 and K1 tidal energy transport reaching about 750 and 650 kW m–1, respectively. The total energy losses of the four dominant constituents in the IS are nearly 338 GW, with the M2 constituent dissipating 240.8 GW. It is also shown that the bottom dissipation rate for the M2 tide is about 1–2 order of magnitudes larger than that of the other three tidal components in the Indonesian seas.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号