共查询到20条相似文献，搜索用时 31 毫秒
1.
To support the adoption of precision agricultural practices in horticultural tree crops, prior research has investigated the relationship between crop vigour (height, canopy density, health) as measured by remote sensing technologies, to fruit quality, yield and pruning requirements. However, few studies have compared the accuracy of different remote sensing technologies for the estimation of tree height. In this study, we evaluated the accuracy, flexibility, aerial coverage and limitations of five techniques to measure the height of two types of horticultural tree crops, mango and avocado trees. Canopy height estimates from Terrestrial Laser Scanning (TLS) were used as a reference dataset against height estimates from Airborne Laser Scanning (ALS) data, WorldView-3 (WV-3) stereo imagery, Unmanned Aerial Vehicle (UAV) based RGB and multi-spectral imagery, and field measurements. Overall, imagery obtained from the UAV platform were found to provide tree height measurement comparable to that from the TLS (R2 = 0.89, RMSE = 0.19 m and rRMSE = 5.37 % for mango trees; R2 = 0.81, RMSE = 0.42 m and rRMSE = 4.75 % for avocado trees), although coverage area is limited to 1–10 km2 due to battery life and line-of-sight flight regulations. The ALS data also achieved reasonable accuracy for both mango and avocado trees (R2 = 0.67, RMSE = 0.24 m and rRMSE = 7.39 % for mango trees; R2 = 0.63, RMSE = 0.43 m and rRMSE = 5.04 % for avocado trees), providing both optimal point density and flight altitude, and therefore offers an effective platform for large areas (10 km2–100 km2). However, cost and availability of ALS data is a consideration. WV-3 stereo imagery produced the lowest accuracies for both tree crops (R2 = 0.50, RMSE = 0.84 m and rRMSE = 32.64 % for mango trees; R2 = 0.45, RMSE = 0.74 m and rRMSE = 8.51 % for avocado trees) when compared to other remote sensing platforms, but may still present a viable option due to cost and commercial availability when large area coverage is required. This research provides industries and growers with valuable information on how to select the most appropriate approach and the optimal parameters for each remote sensing platform to assess canopy height for mango and avocado trees. 相似文献
2.
Janne Heiskanen Miina Rautiainen Lauri Korhonen Matti Mõttus Pauline Stenberg 《International Journal of Applied Earth Observation and Geoinformation》2011
Spectral invariants provide a novel approach for characterizing canopy structure in forest reflectance models and for mapping biophysical variables using satellite images. We applied a photon recollision probability (p) based forest reflectance model (PARAS) to retrieve leaf area index (LAI) from fine resolution SPOT HRVIR and Landsat ETM+ satellite data. First, PARAS was parameterized using an extensive database of LAI-2000 measurements from five conifer-dominated boreal forest sites in Finland, and mixtures of field-measured forest understory spectra. The selected vegetation indices (e.g. reduced simple ratio, RSR), neural networks and kNN method were used to retrieve effective LAI (Le) based on reflectance model simulations. For comparison, we established empirical vegetation index-LAI regression models for our study sites. The empirical RSR–Le regression performed best when applied to an independent test site in southern Finland [RMSE 0.57 (24.2%)]. However, the difference to the best reflectance model based retrievals produced by neural networks was only marginal [RMSE 0.59 (25.1%)]. According to this study, the PARAS model provides a simple and flexible modelling tool for calibrating algorithms for LAI retrieval in conifer-dominated boreal forests. The advantage of PARAS is that it directly uses field measurements to parameterize canopy structure (LAI-2000, hemispherical photographs) and optical properties of foliage and understory. 相似文献
3.
Fertility, or the availability of nutrients and water, controls forest productivity. It affects its carbon sequestration, and thus the forest's effect on climate, as well as its commercial value. Although the availability of nutrients cannot be measured directly using remote sensing methods, fertility alters several vegetation traits detectable from the reflectance spectra of the forest stand, including its pigment content and water stress. However, forest reflectance is also influenced by other factors, such as species composition and stand age. Here, we present a case study demonstrating how data obtained using imaging spectroscopy is correlated with site fertility. The study was carried out in Hyytiälä, Finland, in the southern boreal forest zone. We used a database of state-owned forest stands including basic forestry variables and a site fertility index. To test the suitability of imaging spectroscopy with different spatial and spectral resolutions for site fertility mapping, we performed two airborne acquisitions using different sensor configurations. First, the sensor was flown at a high altitude with high spectral resolution resulting in a pixel size in the order of a tree crown. Next, the same area was flown to provide reflectance data with sub-meter spatial resolution. However, to maintain usable signal-to-noise ratios, several spectral channels inside the sensor were combined, thus reducing spectral resolution. We correlated a number of narrowband vegetation indices (describing canopy biochemical composition, structure, and photosynthetic activity) on site fertility. Overall, site fertility had a significant influence on the vegetation indices but the strength of the correlation depended on dominant species. We found that high spatial resolution data calculated from the spectra of sunlit parts of tree crowns had the strongest correlation with site fertility. 相似文献
4.
基于非相干光源叠加的原理,建立了太阳-激光双光源植被冠层方向反射模型。首先,分析了太阳光和激光的特点,指出了其协同应用对植被定量遥感探测的应用潜力;其次,利用Li-Strahler几何光学模型和辐射传输SAIL模型,进行了双光源情况下的模拟研究,发现在非相干叠加的情况下,当两种光源在不同角度入射时,会出现双热点的现象,并且其强度受到两种光源各自强度的影响。基于上述原理,分别针对两种模型进行试验研究,利用模拟“树木”进行了稀疏分布的几何光学模型研究,利用小麦进行了浓密分布条件下的辐射传输模型试验研究,试验结果表明了基本原理及模拟结果的可靠性。结合相关研究分析表明,双光源建模有利于定量遥感机理模型的求解,可以利用构造的“热点”信息进行植被结构参数提取,同时对于主被动遥感协同应用和激光的植被定量遥感研究具有重要价值。 相似文献
5.
叶面积指数（LAI）和叶倾角分布（LAD）是决定植被冠层结构的重要参数。在计算机模拟植被冠层,两个参数是植被三维真实结构生成的重要控制因子。本论文中,结合计算机图像学理论,基于实验的地面实测结构参数数据利用可改写的扩展L-system方法生成草以及白杨树的真实三维场景。RGM（A radiosity-graphics combined model）模型是基于辐射度方法的计算机模拟模型,利用此模型来计算生成的三维场景可见光及近红外波段的冠层辐射特性,如冠层波谱以及方向反射特性等。在本研究中,模拟了两种不同下垫面的白杨林地：（1）下垫面只有土壤的白杨树场景;（2）下垫面包括土壤和草的白杨树。在特定的场景组分光学特性下,模拟得到两种情况的主平面冠层BRF（bi-di-rectional reflectance factor）,并对两者的差异进行了分析。可以看出,下垫面对冠层BRF的影响不可忽视。但是,由于白杨林地结构的复杂,大尺度的场景中必须由成千上万个面元组成,因此辐射度方法不能模拟大尺度的真实结构场景。为了拓展辐射度方法应用范围,根据白杨树树冠的特点,将其抽象为椭球体,从而减少场景组成面元个数,满足了辐射度方法的要求。并结合几何光学模型的思想,在对椭球体面元赋值加入了间隙率;并考虑了整个树冠的承照面以及阴影面的差异,模拟大尺度林地冠层BRF,且与GOMS模型结果符合的很好。通过以上研究,可以看出计算机模拟为遥感研究获取多角度数据信息提供了一种很好的手段。 相似文献
6.
7.
Sentinel-2卫星落叶松林龄信息反演 总被引：1，自引：0，他引：1
林龄结构信息能够有效反映区域森林群落不同生长阶段的固碳能力,对于评估森林生态系统的健康状况具有重要意义。本研究以中国温带典型优势树种落叶松林为研究对象,分别选择其芽萌动期、展叶期和落叶期时段的Sentinel-2影像,采用多元线性回归（MLR）、随机森林（RF）、支持向量机回归（SVR）、前馈反向传播神经网络（BP）以及多元自适应回归样条（MARS）等5种方法依次构建落叶松林龄反演模型。通过相关性分析首先确定最佳遥感反演物候期,并在此基础上根据相关性差异筛选出5个最优特征变量用于模型反演,分别为冠层含水量（CWC）,归一化水体指数（NDWI）,叶面积指数（LAI）,光合有效辐射吸收率（FAPAR）和植被覆盖度（FVC）。研究结果表明,展叶期为落叶松林最佳遥感反演物候期。除植被衰减指数（PSRI）以及落叶期的NDVI、RVI外,落叶松林龄与各指标之间均呈负相关关系,其中与冠层含水量（CWC）的相关性最高,pearson相关系数达到-0.74（p<0.01）。此外,不同模型反演结果表明,随机森林模型（RF）为最佳落叶松林龄估测模型,其平均决定系数R2和平均均方根误差RMSE分别为0.89和2.91 a;多元线性回归模型（MLR）的林龄估测结果最差,其平均决定系数R2和平均均方根误差RMSE仅为0.57和5.69 a,非线性模型能更好的解释林龄与建模变量之间的关系。 相似文献
8.
9.
Varghese Ouseph Alappat Ashok Kumar Joshi Y. V. N. Krishnamurthy 《Journal of the Indian Society of Remote Sensing》2011,39(4):583-589
Optical remote sensing data have been extensively used to derive biophysical properties that relate forest type and composition.
However, stand density, stand height and stand volume cannot be estimated directly from optical remote sensing data owing
to poor sensitivity between these parameters and spectral reflectance. The ability of microwave energy to penetrate within
forest vegetation makes it possible to extract information on both the crown and trunk components from radar data. The type
of polarization employed determines the radar response to the various shapes and orientations of the scattering mechanisms
within the canopy or trunk. This study mainly presents experimental results obtained with airborne E-SAR using polarimetric
C and L bands over the tropical dry deciduous forest of Chandrapur Forest Division, Maharashtra. A detailed documentation
of the relationship between SAR C & L bands backscattering and forest stand variables has been provided in the present study
through linear correlation. Linear correlation of the single channel SAR derived estimates with the field measured means show
a good correlation between L HV backscattering coefficient with stand volume (r2 = 0.71) and L HH backscattering coefficient with stand density (r2 = 0.75). The results imply that SAR data has significant potential for stand menstruation in operational forestry. 相似文献
10.
In this paper, we carried out a laboratory experiment to study changes in canopy reflectance of Tamarugo plants under controlled water stress. Tamarugo (Prosopis tamarugo Phil.) is an endemic and endangered tree species adapted to the hyper-arid conditions of the Atacama Desert, Northern Chile. Observed variation in reflectance during the day (due to leaf movements) as well as changes over the experimental period (due to water stress) were successfully modelled by using the Soil-Leaf-Canopy (SLC) radiative transfer model. Empirical canopy reflectance changes were mostly explained by the parameters leaf area index (LAI), leaf inclination distribution function (LIDF) and equivalent water thickness (EWT) as shown by the SLC simulations. Diurnal leaf movements observed in Tamarugo plants (as adaptation to decrease direct solar irradiation at the hottest time of the day) had an important effect on canopy reflectance and were explained by the LIDF parameter. The results suggest that remote sensing based assessment of this desert tree should consider LAI and canopy water content (CWC) as water stress indicators. Consequently, we tested fifteen different vegetation indices and spectral absorption features proposed in literature for detecting changes of LAI and CWC, considering the effect of LIDF variations. A sensitivity analysis was carried out using SLC simulations with a broad range of LAI, LIDF and EWT values. The Water Index was the most sensitive remote sensing feature for estimating CWC for values less than 0.036 g/cm2, while the area under the curve for the spectral range 910–1070 nm was most sensitive for values higher than 0.036 g/cm2. The red-edge chlorophyll index (CIred-edge) performed the best for estimating LAI. Diurnal leaf movements had an effect on all remote sensing features tested, particularly on those for detecting changes in CWC. 相似文献
11.
12.
Forest canopy density stratification using biophysical modeling 总被引：1，自引：0，他引：1
Forest canopy density is an important parameter to assess the ecological conditionsviz, light penetration through canopy, undergrowth, surface reflectance, rainfall interception, etc. in a forest landscape. The rate of change in the cover and density has increased due to human need for fuel and fodder. Hence, quick, repetitive and accurate information about forest density is required at the local, regional, state and national levels for sustainable forest management. Satellite remote sensing has the potential to provide information on the forest canopy closure. The present study aims at forest canopy density mapping using satellite remote sensing data using three techniques: visual interpretation (VI), object oriented image segmentation (OOIS) and biophysical modeling (BM). On comparing the techniques, the BM has been found to be the better density mapping technique than other two in terms of accuracy, efficiency and high correlation with ground estimates. 相似文献
13.
遥感模型多参数反演相互影响机理的研究 总被引：2，自引：0，他引：2
遥感数据具有覆盖范围广、时间与空间分辨率高的特点,被广泛应用于提取区域范围内的一些重要的生物物理参数.为提高参数的提取精度,需要制定正确的反演策略.了解影响参数提取精度的因素、反演过程中各反演参数之间如何相互作用是制定合理反演策略的关键.本文通过数学推导与物理机理的分析,证明了影响参数反演精度的因素不但有冠层反射率数据的质量,还有反演过程中参与反演的未知参数的个数、参与反演的每个参数的敏感性及各个参数敏感性之间的相关性.最后通过对反演不同参数个数、不同数据质量进行了叶面积指数反演的精度分析,验证影响参数反演精度的各个因素. 相似文献
14.
《地理信息系统科学与遥感》2013,50(2):229-248
This study evaluated the utility of narrowband (EO-1 Hyperion) and broadband (Landsat ETM+) remote sensing data for the estimation of leaf area index (LAI) in a tropical environment in Sulawesi, Indonesia. LAI was inferred from canopy gap fraction measurements taken in natural tropical forest and cocoa plantations. Single and multiple spectral bands and spectral indices were used as predictor variables in reduced major axis (RMA) and ordinary least squares (OLS) regression models. The predictive power of most regression models was notably higher when employing narrowband data instead of broadband data. Highly significant relationships between LAI and spectral reflectance were observed near the red-edge region and in most shortwave infrared (SWIR) bands. In contrast to most near-infrared (NIR) narrow bands, the correlation between SWIR reflectance and LAI was not confounded when including both vegetation types and did not suffer from saturation. The results demonstrate that leaf area index of a challenging tropical environment can be estimated with satisfactory accuracy from hyperspectral remote sensing data. 相似文献
15.
2-D delineation of individual citrus trees from UAV-based dense photogrammetric surface models 总被引：1，自引：0，他引：1
One of the challenges of remote sensing and computer vision lies in the three-dimensional (3-D) reconstruction of individual trees by using automated methods through very high-resolution (VHR) data sets. However, a successful and complete 3-D reconstruction relies on precise delineation of the trees in two dimensions. In this paper, we present an original approach to detect and delineate citrus trees using unmanned aerial vehicles based on photogrammetric digital surface models (DSMs). The symmetry of the citrus trees in a DSM is handled by an orientation-based radial symmetry transform which is computed in a unique way. Next, we propose an efficient strategy to accurately build influence regions of each tree, and then we delineate individual citrus trees through active contours by taking into account the influence region of each canopy. We also present two efficient strategies to filter out erroneously detected canopy regions without having any height thresholds. Experiments are carried out on eight test DSMs composed of different types of citrus orchards with varying densities and canopy sizes. Extensive comparisons to the state-of-the-art approaches reveal that our proposed approach provides superior detection and delineation performances through supporting a nice balance between precision and recall measures. 相似文献
16.
Rahul Tripathi Rabi N. Sahoo Vinay K. Sehgal R. K. Tomar Debashish Chakraborty S. Nagarajan 《Journal of the Indian Society of Remote Sensing》2012,40(1):19-28
The current development of satellite technology particularly in the sensors like POLDER and MISR, has emphasized more on directional
reflectance measurements (i.e. spectral reflectance of the target measured from different view zenith and azimuth angles)
of the earth surface features mainly the vegetation for retrieval of biophysical parameters at regional scale using radiative
transfer models. This approach being physical process based and uses directional reflectance measurement has been found to
better and more reliable compared to the conventional statistical approach used till date and takes care of anisotropic nature
(i.e. reflectance from the target is different if measured from different view angles) of the target. Keeping this in view
a field experiment was conducted in mustard crop to evaluate the radiative transfer model for biophysical parameter retrieval
through its inversion with the objectives set as (i) to relate canopy biophysical parameters and geometry to its bidirectional
reflectance, (ii) to evaluate a canopy reflectance model to best represent the radiative transfer within the canopy for its
inversion and (iii) to retrieve crop biophysical parameters through inversion of the model. Two varieties of the mustard crop
(Brassica juncea L) were grown with two nitrogen treatments. The bidirectional reflectance data obtained at 5 nm interval
for a range of 400–1100 nm were integrated to IRS LISS–II sensor’s four band values using Newton Cotes Integration technique.
Biophysical parameters like leaf area index, leaf chlorophyll content, leaf length, plant height and average leaf inclination
angle, biomass etc were estimated synchronizing with the bi-directional reflectance measurements. Radiative transfer model PROSAIL model was
validated and its inversion was done to retrieve LAI and ALA. Look Up Table (LUT) of Bidirectional reflectance distribution
function (BRDF) was prepared simulating through PROSAIL model varying only LAI (0.2 interval from 1.2 to 5.4 ) and ALA (5°
interval from 40° to 55°) parameters and inversion was done using a merit function and numerical optimization technique given
by Press et al. (1986). The derived LAI and ALA values from inversion were well matched with observed one with RMSE 0.521
and 5.57, respectively. 相似文献
17.
The accurate estimation of leaf water content (LWC) and knowledge about its spatial variation are important for forest and agricultural management since LWC provides key information for evaluating plant physiology. Hyperspectral data have been widely used to estimate LWC. However, the canopy reflectance can be affected by canopy structure, thereby introducing error to the retrieval of LWC from hyperspectral data alone. Radiative transfer models (RTM) provide a robust approach to combine LiDAR and hyperspectral data in order to address the confounding effects caused by the variation of canopy structure. In this study, the INFORM model was adjusted to retrieve LWC from airborne hyperspectral and LiDAR data. Two structural parameters (i.e. stem density and crown diameter) in the input of the INFORM model that affect canopy reflectance most were replaced by canopy cover which could be directly obtained from LiDAR data. The LiDAR-derived canopy cover was used to constrain in the inversion procedure to alleviate the ill-posed problem. The models were validated against field measurements obtained from 26 forest plots and then used to map LWC in the southern part of the Bavarian Forest National Park in Germany. The results show that with the introduction of prior information of canopy cover obtained from LiDAR data, LWC could be retrieved with a good accuracy (R2 = 0.87, RMSE = 0.0022 g/cm2, nRMSE = 0.13). The adjustment of the INFORM model facilitated the introduction of prior information over a large extent, as the estimation of canopy cover can be achieved from airborne LiDAR data. 相似文献
18.
森林郁闭度是森林资源调查中的一个重要因子,对森林质量评价具有重要作用。随着人工智能技术和遥感技术的不断发展,研究如何利用深度学习有效协同不同空间覆盖能力的遥感数据实现区域森林郁闭度的估测具有重要意义。由此提出了一种协同应用高密度无人机激光雷达和高空间分辨率卫星遥感数据,对区域森林郁闭度进行定量估测的深度学习模型（UnetR）。对用于图像分类的Unet模型的损失函数进行改进,并在卷积层后加入批量归一化层,使其具有对连续变量进行定量估测的能力。与全卷积神经网络、随机森林和支持向量机回归模型进行对比实验。结果表明, UnetR模型的均方根误差较低,估测精度较高,为实现区域森林郁闭度遥感监测提供了一种人力成本低、自动化程度高的估测方法。 相似文献
19.
基于遥感的区域尺度森林地上生物量估算研究 总被引：1，自引：0，他引：1
森林是陆地生态系统最大的碳库,精确估算森林生物量是陆地碳循环研究的关键。首先从机载LiDAR数据中提取高度和密度统计量,采用逐步回归模型进行典型样区生物量估算;然后利用机载LiDAR数据估算的生物量作为样本数据,与多光谱遥感数据Landsat8 OLI的波段反射率及植被指数建立回归模型,实现区域尺度森林地上生物量估算。实验结果显示,机载LiDAR数据估算的鼎湖山样区生物量与地面实测生物量的相关性R2达0.81,生物量RMSE为40.85 t/ha,说明机载LiDAR点云数据的高度和密度统计量与生物量存在较高的相关性。以机载LiDAR数据估算的生物量为样本数据,结合多光谱遥感数据Landsat8 OLI估算粤西北地区的森林地上生物量,精度验证结果为:R2为0.58,RMSE为36.9 t/ha;针叶林、阔叶林和针阔叶混交林等3种不同森林类型生物量的估算结果为:R2分别为0.51(n=251)、0.58(n=235)和0.56(n=241),生物量RMSE分别为24.1 t/ha、31.3 t/ha和29.9 t/ha,估算精度相差不大。总体上看,利用遥感数据可以开展区域尺度的森林地上生物量估算,为森林固碳监测提供有力的参考数据。 相似文献
20.
结合机载LiDAR数据,提出了一种改进的GLAS光斑点冠层高度地形校正模型,以校正后的GLAS光斑点作为输入样本,结合MODIS遥感影像,利用支持向量回归（SVR）的方法对研究区森林冠层高度进行分生态区估测,并利用野外调查数据和机载LiDAR冠层高度结果对估测结果进行验证。结果显示:研究区的坡度等级直接影响GLAS光斑点森林冠层高度估测精度,改进的地形校正模型可以较好的减小坡度对GLAS光斑点森林冠层高度估测的影响,模型精度RMSE稳定在3.25~3.48 m;不同生态分区的SVR模型估测精度较为稳定,其RMSE=6.41~7.56 m;与算数平均高相比,样地的Lorey's高与制图结果拟合最好,不同生态分区平均估测精度为80.3%。机载LiDAR冠层高度结果的验证平均精度为79.5%,和Lorey's高验证结果呈现较好的一致性。 相似文献