首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 484 毫秒
1.
Deep crustal reflection data that are critical for the interpretation of Laramide structure have been obtained by the Consortium for Continental Reflection Profiling (COCORP). The Laramide orogeny, which occurred from the late Cretaceous to early Eocene, is characterized in Wyoming by large uplifts of Precambrian basement, commonly flanked by reverse faults. The attitude of these faults at depth has been a major tectonic problem and is very important for deciding whether horizontal or vertical crustal movements were primarily responsible for the basement uplifts. COCORP has run 158 km of deep seismic reflection profiles (recording to 20-sec two-way travel time) across the southeastern end of the Wind River Mountains, the largest of these Laramide uplifts. Reflections from the thrust fault flanking the Wind River uplift can be clearly traced on the profiles to at least 24-km depth and possibly as deep as about 36 km with a fairly uniform apparent dip of 30°–35°. Other reflection events subparallel to the main Wind River thrust are present in the seismic profiles and may represent other faults. There is at least 21 km of crustal shortening along the thrust. There is no evidence in the reflection profiles for large-scale folding of the basement; the Wind River Mountains were formed predominantly by thrust movements. Gravity anomalies in the Wind River Mountains can be modeled by a thrust that displaces dense material in the lower crust. If the thrust ever cut the Moho, the effect is not observed in the gravity today. A proposed model for the presence of uplifted basement in Wyoming invokes a shallowly dipping, subducted Farallon plate beneath the North American continent; drag between the two plates localized compressional stresses in an area over 800 km into the North American plate causing large thrusts to develop. The earth's crust seems to have fractured as a fairly rigid plate  相似文献   

2.
Shallow and deep sources generate a gravity low in the central Iberian Peninsula. Long-wavelength shallow sources are two continental sedimentary basins, the Duero and the Tajo Basins, separated by a narrow mountainous chain called the Spanish Central System. To investigate the crustal density structure, a multitaper spectral analysis of gravity data was applied. To minimise biases due to misleading shallow and deep anomaly sources of similar wavelength, first an estimation of gravity anomaly due to Cenozoic sedimentary infill was made. Power spectral analysis indicates two crustal discontinuities at mean depths of 31.1 ± 3.6 and 11.6 ± 0.2 km, respectively. Comparisons with seismic data reveal that the shallow density discontinuity is related to the upper crust lower limit and the deeper source corresponds to the Moho discontinuity. A 3D-depth model for the Moho was obtained by inverse modelling of regional gravity anomalies in the Fourier domain. The Moho depth varies between a mean depth of 31 km and 34 km. Maximum depth is located in a NW–SE trough. Gravity modelling points to lateral density variations in the upper crust. The Central System structure is described as a crustal block uplifted by NE–SW reverse faults. The formation of the system involves displacement along an intracrustal detachment in the middle crust. This detachment would split into several high-angle reverse faults verging both NW and SE. The direction of transport is northwards, the detachment probably being rooted at the Moho.  相似文献   

3.
The stratigraphic and tectonic setting in the northwest part of Himalayan belt is complex and thrusted due to the collision of Indian plate and the Eurasian plate. During the past, the Himalaya is divided into four parts; these are Outer Himalaya, Lesser Himalaya, Greater or Higher Himalaya and Tethys Himalaya. The appearance of basement rocks played a significant role in the Himalayan periphery for stratigraphic, structural and tectonic movement. The deformation pattern of the crustal rocks causing the rise of basement rocks which constitutes an integral part of crustal configuration during the evolutionary stages of the Himalaya. In this study, an attempt has been made to estimate the basement depth configuration using spectral analysis and Euler deconvolution technique of gravity data in the northwest Himalaya region. The elevation increases continuously from 500 m to 5100 m in SW to NE direction, however, Bouguer gravity anomaly decreases continuously from ?130 mGal to ?390 mGal in SW to NE direction due to the isostaic adjustment. Gravity anomaly is very low near Harsil, Badrinath and Joshimath area and observed higher elevation due to the deep rooted basement. However, there are extrusion of crystalline basement in and around the Badrinath area due to the resettlement of geologic process which are overlaid to the top surface of the sedimentary layers. Euler deconvolution technique has been applied to detect the direct basement depth and results show a good correlation with the average depth of the spectral analysis and other works carried by different authors. Three gravity profiles are selected in appropriate places orienting SW-NE direction with a profile length of 160 km, 150 km and 140 km respectively in the study area for calculating the average depth of the basement rock. The average basement depth calculated is around 11.27 km using the spectral analysis technique and results are well correlated with the results of various workers. Euler deconvolution studies along the three selected profiles have been interpreted. It has been observed that there are more number of cluster points falling between depth ranges of 10 to 15 km, dipping in SW to NE direction. Euler’s study shows deep rooted connection near Main Frontal Thrust (MFT), Main Boundary Thrust (MBT), Main Central Thrust (MCT), Bearing Thrust (BT) and Vaikrita Thrust (VT) locations as per profile study. Based on these studies three geological models have been prepared along the profiles showing different tectonic resettlement and depth of crystalline basement. Crystalline rocks exposed at the surface may be due to uplift along the shear in the MCT zone by kinetic flow basically, Munsiayari Thrust (MT) and VT in the of NW-Himalaya region.  相似文献   

4.
New deep reflection seismic, bathymetry, gravity and magnetic data have been acquired in a marine geophysical survey of the southern South China Sea, including the Dangerous Grounds, Northwest Borneo Trough and the Central Luconia Platform. The seismic and bathymetry data map the topography of shallow density interfaces, allowing the application of gravity modeling to delineate the thickness and composition of the deeper crustal layers. Many of the strongest gravity anomalies across the area are accounted for by the basement topography mapped in the seismic data, with substantial basement relief associated with major rift development. The total crustal thickness is however quite constant, with variations only between 25 and 30 km across the Central Luconia Platform and Dangerous Grounds. The Northwest Borneo Trough is underlain by thinned crust (25–20 km total crustal thickness) consistent with the substantial water depths. There is no evidence of any crustal suture associated with the trough, nor any evidence of relict oceanic crust beneath the trough. The crustal thinning also does not extend along the complete length of the trough, with crustal thicknesses of 25 km and more modeled on the most easterly lines to cross the trough. Modeled magnetic field variations are also consistent with the study area being underlain by continental crust, with the magnetic field variations well explained by irregular magnetisations consistent with inhomogeneous continental crust, terminating at the basement unconformity as mapped from the seismic data.  相似文献   

5.
We present a gravity model of the crustal structure in southern Mexico based on interpretation of a detailed marine gravity profile perpendicularly across the Middle America Trench offshore from Acapulco, and a regional gravity transect extending into continental Mexico across the Sierra Madre del Sur, the central sector of the Trans-Mexican Volcanic Belt, the Sierra Madre Oriental, the Coastal Plain, and into the Gulf of Mexico. The elastic thickness of the Cocos lithospheric plate was found to be 30 km. In agreement with a previous seismic refraction study, no major differences in crustal structure were observed on both sides of the O’Gorman Fracture Zone. The gravity high seaward of the trench is interpreted as due to the incipient flexure and crustal thinning. The gravity low at the axis of the trench is explained by the increase in water depth and the existence of low-density accreted or continental-derived sediments (2.25 and 2.40 g/cm3). A gravity high of 50 mGal extending about 100 km landward is interpreted as caused by local shoaling of the Moho. The crust attains a thickness of 42 km under the Trans-Mexican Volcanic Belt but thins beneath the Coastal Plain and the continental slope of the Gulf of Mexico. Gravity highs around the Sierra de Tamaulipas are interpreted in terms of relief of the lower–upper crustal interface, implying a shallow basement.  相似文献   

6.
Spectral analysis of digital data of the Bouguer anomaly map of NW India suggests maximum depth of causative sources as 134 km that represents the regional field and coincides with the upwarped lithosphere — asthenosphere boundary as inferred from seismic tomography. This upwarping of the Indian plate in this section is related to the lithospheric flexure due to its down thrusting along the Himalayan front. The other causative layers are located at depths of 33, 17, and 6 km indicating depth to the sources along the Moho, lower crust and the basement under Ganga foredeep, the former two also appear to be upwarped as crustal bulge with respect to their depths in adjoining sections. The gravity and the geoid anomaly maps of the NW India provide two specific trends, NW-SE and NE-SW oriented highs due to the lithospheric flexure along the NW Himalayan fold belt in the north and the Western fold belt (Kirthar -Sulaiman ranges, Pakistan) and the Aravalli Delhi Fold Belt (ADFB) in the west, respectively. The lithospheric flexures also manifest them self as crustal bulge and shallow basement ridges such as Delhi — Lahore — Sagodha ridge and Jaisalmer — Ganganagar ridge. There are other NE-SW oriented gravity and geoid highs that may be related to thermal events such as plumes that affected this region. The ADFB and its margin faults extend through Ganga basin and intersect the NW Himalayan front in the Nahan salient and the Dehradun reentrant that are more seismogenic. Similarly, the extension of NE-SW oriented gravity highs associated with Jaisalmer — Ganganagar flexure and ridge towards the Himalayan front meets the gravity highs of the Kangra reentrant that is also seismogenic and experienced a 7.8 magnitude earthquake in 1905. Even parts of the lithospheric flexure and related basement ridge of Delhi — Lahore — Sargodha show more seismic activity in its western part and around Delhi as compared to other parts. The geoid highs over the Jaisalmer — Ganganagar ridge passes through Kachchh rift and connects it to plate boundaries towards the SW (Murray ridge) and NW (Kirthar range) that makes the Kachchh as a part of a diffused plate boundary, which, is one of the most seismogenic regions with large scale mafic intrusive that is supported from 3-D seismic tomography. The modeling of regional gravity field along a profile, Ganganagar — Chandigarh extended beyond the Main Central Thrust (MCT) constrained from the various seismic studies across different parts of the Himalaya suggests crustal thickening from 35-36 km under plains up to ～56 km under the MCT for a density of 3.1 g/cm3 and 3.25 g/cm3 of the lower most crust and the upper mantle, respectively. An upwarping of ～3 km in the Moho, crust and basement south of the Himalayan frontal thrusts is noticed due to the lithospheric flexure. High density for the lower most crust indicates partial eclogitization that releases copious fluid that may cause reduction of density in the upper mantle due to sepentinization (3.25 g/cm3). It has also been reported from some other sections of Himalaya. Modeling of the residual gravity and magnetic fields along the same profile suggest gravity highs and lows of NW India to be caused by basement ridges and depressions, respectively. Basement also shows high susceptibility indicating their association with mafic rocks. High density and high magnetization rocks in the basement north of Chandigarh may represent part of the ADFB extending to the Himalayan front primarily in the Nahan salient. The Nahan salient shows a basement uplift of ～ 2 km that appears to have diverted courses of major rivers on either sides of it. The shallow crustal model has also delineated major Himalayan thrusts that merge subsurface into the Main Himalayan Thrust (MHT), which, is a decollment plane.  相似文献   

7.
In the eastern part of the Indian shield,late PaleozoiceMesozoic sedimentary rocks of the Talchir Basin lie precisely along a contact of Neoproterozoic age between granulites of the Eastern Ghats Mobile Belt(EGMB)and amphibolite facies rocks of the Rengali Province.At present,the northern part of the basin experiences periodic seismicity by reactivation of faults located both within the basin,and in the Rengali Province to the north.Detailed gravity data collected across the basin show that Bouguer anomalies decrease from the EGMB(wt15 mGal),through the basin(w 10 mGal),into the Rengali Province(w 15 mGal).The data are consistent with the reportedly uncompensated nature of the EGMB,and indicate that the crust below the Rengali Province has a cratonic gravity signature.The contact between the two domains with distinct sub-surface structure,inferred from gravity data,coincides with the North Orissa Boundary Fault(NOBF)that defnes the northern boundary of the Talchir Basin.Post-Gondwana faults are also localized along the northern margin of the basin,and present-day seismic tremors also have epicenters close to the NOBF.This indicates that the NOBF was formed by reactivation of a Neoproterozoic terrane boundary,and continues to be susceptible to seismic activity even at the present-day.  相似文献   

8.
利用最新多道地震剖面资料,结合重力、磁力、地形等地球物理资料,揭示了中沙地块南部断裂空间展布特征、断裂发育时期、断裂内部构造形变特征及深部地壳结构,并基于认识探讨了断裂的发育机制。研究结果认为,中沙地块南部陆缘构造属性为非火山型被动大陆边缘：地壳性质从西北向东南由减薄陆壳向洋陆过渡壳再向正常洋壳发育变化;Moho面埋深从中沙地块下方的26 km快速抬升到海盆的10~12 km;从中沙地块陡坡至其前缘海域的重力异常明显负异常区为洋陆过渡带,在重力由高值负异常上升到海盆的低值正、负异常的边界为洋陆边界。中沙地块南部发育有4组阶梯状向海倾的深大正断裂,主要发育时期为晚渐新世到中中新世。断裂早期发育与南海东部次海盆近NS向扩张有关,后期遭受挤压变形、与菲律宾海板块向南海的NWW向仰冲有关。该研究有助于更好认识南海海盆的扩张历史和南海被动大陆边缘的类型。  相似文献   

9.
The Cauvery–Palar basin is a major peri-cratonic rift basin located along the Eastern Continental Margin of India (ECMI) that had formed during the rift-drift events associated with the breakup of eastern Gondwanaland (mainly India–Sri Lanka–East Antarctica). In the present study, we carry out an integrated analysis of the potential field data across the basin to understand the crustal structure and the associated rift tectonics. The composite-magnetic anomaly map of the basin clearly shows the onshore-to-offshore structural continuity, and presence of several high-low trends related to either intrusive rocks or the faults. The Curie depth estimated from the spectral analysis of offshore magnetic anomaly data gave rise to 23 km in the offshore Cauvery–Palar basin. The 2D gravity and magnetic crustal models indicate several crustal blocks separated by major structures or faults, and the rift-related volcanic intrusive rocks that characterize the basin. The crustal models further reveal that the crust below southeast Indian shield margin is ～36 km thick and thins down to as much as 13–16 km in the Ocean Continent Transition (OCT) region and increases to around 19–21 km towards deep oceanic areas of the basin. The faulted Moho geometry with maximum stretching in the Cauvery basin indicates shearing or low angle rifting at the time of breakup between India–Sri Lanka and the East Antarctica. However, the additional stretching observed in the Cauvery basin region could be ascribed to the subsequent rifting of Sri Lanka from India. The abnormal thinning of crust at the OCT is interpreted as the probable zone of emplaced Proto-Oceanic Crust (POC) rocks during the breakup. The derived crustal structure along with other geophysical data further reiterates sheared nature of the southern part of the ECMI.  相似文献   

10.
The Southern Granulite Terrain (SGT) is composed of high-grade granulite domain occurring to the south of Dharwar Craton (DC). The structural units of SGT show a marked change in the structural trend from the dominant north–south in DC to east–west trend in SGT and primarily consist of different crustal blocks divided by major shear zones. The Bouguer anomaly map prepared based on nearly 3900 gravity observations shows that the anomalies are predominantly negative and vary between −125 mGal and +22 mGal. The trends of the anomalies follow structural grain of the terrain and exhibit considerable variations within the charnockite bodies. Two-dimensional wavelength filtering as well as Zero Free-air based (ZFb) analysis of the Geoid-Corrected Bouguer Anomaly map of the region is found to be very useful in preparing regional gravity anomaly map and inversion of this map gave rise to crustal thicknesses of 37–44 km in the SGT. Crustal density structure along four regional gravity profiles cutting across major shear zones, lineaments, plateaus and other important geological structures bring out the following structural information. The Bavali Shear Zone extending at least up to 10 km depth is manifested as a plane separating two contrasting upper crustal blocks on both sides and the gravity high north of it reveals the presence of a high density mass at the base of the crust below Coorg. The steepness of the Moyar and Bhavani shears on either side of Nilgiri plateau indicates uplift of the plateau due to block faulting with a high density mass at the crustal base. The Bhavani Shear Zone is manifested as a steep southerly dipping plane extending to deeper levels along which alkaline and granite rocks intruded into the top crustal layer. The gravity high over Palghat gap is due to the upwarping of Moho by 1–2 km with the presence of a high density mass at intermediate crustal levels. The gravity low in Periyar plateau is due to the granite emplacement, mid-crustal interface and the thicker crust. The feeble gravity signature across the Achankovil shear characterized by sharp velocity contrast indicates that the shear is not a superficial structure but a crustal scale zone of deformation reaching up to mid-crustal level.  相似文献   

11.
The South China Sea (SCS) is a region of interaction among three major plates: the Pacific, Indo-Australian and Eurasian. The collision of the Indian subcontinent with the Eurasian plate in the northwest, back-arc spreading at the center, and subduction beneath the Philippine plate along Manila trench in the east and the collision along Palawan trough in the south have produced complex tectonic features within and along the SCS. This investigation examines the satellite-derived gravity anomalies of the SCS and compares them with major tectonic features of the area. A map of Bouguer gravity anomaly is derived in conjunction with available seafloor topography to investigate the crustal structure. The residual isostatic gravity anomaly is calculated assuming that the Cenozoic sedimentary load is isostatically compensated. The features in the gravity anomalies in general correlate remarkably well with the major geological features, including offsets in the seafloor spreading segments, major faults, basins, seamounts and other manifestations of magmatism and volcanism on the seafloor. They also correlate with the presumed location of continental-oceanic crust boundary. The region underlain by oceanic crust in the central part of the SCS is characterized by a large positive Bouguer gravity anomaly (220–330 mgal) as well as large free-air and residual isostatic anomalies. There are, however, important differences among spreading segments. For example, in terms of free-air gravity anomaly, the southwest section of mid-ocean has an approximately 50 km wide belt of gravity low superimposed on a broad high of 45 mgal running NW–SE, whereas there are no similar features in other spreading segments. There are indications that gravity anomalies may represent lateral variation in upper crustal density structure. For instance, free air and isostatic anomalies show large positive anomalies in the east of the Namconson basin, which coincide with areas of dense volcanic material known from seismic surveys. The Red River Fault system are clearly identified in the satellite gravity anomalies, including three major faults, Songchay Fault in the southwest, Songlo Fault in the Northeast and Central Fault in the center of the basin. They are elongated in NW–SE direction between 20±30'N and 17°N and reach to Vietnam Scarp Fault around 16°30'N. It is also defined that the crustal density in the south side of the Central Basin is denser than that in the north side of the Central Basin.  相似文献   

12.
Gravity and magnetic data of the Kachchh basin and surrounding regions have delineated major E–W and NW–SE oriented lineaments and faults, which are even extending up to plate boundaries in the north Arabian Sea and western boundary of the Indian plate, respectively. The epicentral zone of Bhuj earthquake and its aftershocks is located over the junction of Rann of Kachchh and median uplifts viz. Kachchh mainland and Wagad uplifts, which are separated by thrust faults. Gravity data with constraints from the results of the seismic studies along a profile suggest that the basement is uplifted towards the north along thrust faults dipping 40–60° south. Similarly gravity and magnetic modeling along a profile across Wagad uplift suggest south dipping (50–60°) basement contacts separating rocks of high susceptibility and density towards the north. One of these contacts coincides with the fault plane of the Bhuj earthquake as inferred from seismological studies and its projection on the surface coincides with the E–W oriented north Wagad thrust fault. A circular gravity high in contact with the fault in northern part of the Wagad uplift along with high amplitude magnetic anomaly suggests plug type mafic intrusive in this region. Several such gravity anomalies are observed over the island belt in the Rann of Kachchh indicating their association with mafic intrusions. The contact of these intrusives with the country rock demarcates shallow crustal inhomogeneities, which provides excellent sites for the accumulation of regional stress. A regional gravity anomaly map based on the concept of isostasy presents two centers of gravity lows of −11 to −13 mGal (10−5 m/s2) representing mass deficiency in the epicentral region. Their best-fit model constrained from the receiver function analysis and seismic refraction studies suggest crustal root of 7–8 km (deep crustal inhomogeneity) under them for a standard density contrast of −400 kg/m3. It is, therefore, suggested that significant amount of stress get concentrated in this region due to (a) buoyant crustal root, (b) regional stress due to plate tectonic forces, and (c) mafic intrusives as stress concentrators and the same might be responsible for the frequent and large magnitude earthquakes in this region including the Bhuj earthquake of January 26, 2001.  相似文献   

13.
By compiling wide-angle seismic velocity profiles along the 400-km-long Lofoten–Vesterålen continental margin off Norway, and integrating them with an extensive seismic reflection data set and crustal-scale two-dimensional gravity modelling, we outline the crustal margin structure. The structure is illustrated by across-margin regional transects and by contour maps of depth to Moho, thickness of the crystalline crust, and thickness of the 7+ km/s lower crustal body. The data reveal a normal thickness oceanic crust seaward of anomaly 23 and an increase in thickness towards the continent–ocean boundary associated with breakup magmatism. The southern boundary of the Lofoten–Vesterålen margin, the Bivrost Fracture Zone and its landward prolongation, appears as a major across-margin magmatic and structural crustal feature that governed the evolution of the margin. In particular, a steeply dipping and relatively narrow, 10–40-km-wide, Moho-gradient zone exists within a continent–ocean transition, which decreases in width northward along the Lofoten–Vesterålen margin. To the south, the zone continues along the Vøring margin, however it is offset 70–80 km to the northwest along the Bivrost Fracture Zone/Lineament. Here, the Moho-gradient zone corresponds to a distinct, 25-km-wide, zone of rapid landward increase in crustal thickness that defines the transition between the Lofoten platform and the Vøring Basin. The continental crust on the Lofoten–Vesterålen margin reaches a thickness of 26 km and appears to have experienced only moderate extension, contrasting with the greatly extended crust in the Vøring Basin farther south. There are also distinct differences between the Lofoten and Vesterålen margin segments as revealed by changes in structural style and crustal thickness as well as in the extent of elongate potential-field anomalies. These changes may be related to transfer zones. Gravity modelling shows that the prominent belt of shelf-edge gravity anomalies results from a shallow basement structural relief, while the elongate Lofoten Islands belt requires increased lower crustal densities along the entire area of crustal thinning beneath the islands. Furthermore, gravity modelling offers a robust diagnostic tool for the existence of the lower crustal body. From modelling results and previous studies on- and off-shore mid-Norway, we postulate that the development of a core complex in the middle to lower crust in the Lofoten Islands region, which has been exhumed along detachments during large-scale extension, brought high-grade, lower crustal rocks, possibly including accreted decompressional melts, to shallower levels.  相似文献   

14.
The Andaman arc in the northeastern Indian Ocean defines nearly 1100 km long active plate margin between the India and Burma plates where an oblique Benioff zone develops down to 200 km depth. Several east-trending seismologic sections taken across the Andaman Benioff Zone (ABZ) are presented here to detail the subduction zone geometry in a 3-D perspective. The slab gravity anomaly, computed from the 3-D ABZ configuration, is a smooth, long-wavelength and symmetric gravity high of 85 mGal amplitude centering to the immediate east of the Nicobar Island, where, a prominent gravity “high” follows the Nicobar Deep. The Slab-Residual Gravity Anomaly (SRGA) and Mantle Bouguer Anomaly (MBA) maps prepared for the Andaman plate margin bring out a double-peaked SRGA “low” in the range of − 150 to − 240 mGal and a wider-cum-larger MBA “low” having the amplitude of − 280 to − 315 mGal demarcating the Andaman arc–trench system. The gravity models provide evidences for structural control in propagating the rupture within the lithosphere. The plate margin configuration below the Andaman arc is sliced by the West Andaman Fault (WAF) as well as by a set of sympathetic faults of various proportions, often cutting across the fore-arc sediment package. Some of these fore-arc thrust faults clearly give rise to considerably high post-seismic activity, but the seismic incidence along the WAF further east is comparatively much less particularly in the north, although, the lack of depth resolution for many of the events prohibits tracing the downward continuity of these faults. Tectonic correlation of the gravity-derived models presented here tends to favour the presence of oceanic crust below the Andaman–Nicobar Outer Arc Ridge.  相似文献   

15.
A ～400 km long deep crustal reflection seismic survey was acquired in central Victoria, Australia, in 2006. It has provided information on crustal architecture across the western Lachlan Orogen and has greatly added to the understanding of the tectonic evolution. The east-dipping Moyston Fault is confirmed as the suture between the Delamerian and western Lachlan Orogens, and is shown to extend down to the Moho. The Avoca Fault, the boundary between the Stawell and Bendigo Zones, is a west-dipping listric reverse fault that intersects the Moyston Fault at a depth of about 22 km, forming a V-shaped geometry. Both the Stawell and Bendigo Zones can be divided broadly into a lower crustal region of interlayered and imbricated metavolcanic and metasedimentary rocks and an upper crustal region of tightly folded metasedimentary rocks. The Stawell Zone was probably part of a Cambrian accretionary system along the eastern Gondwanaland margin, and mafic rocks may have been partly consumed by Cambrian subduction. Much of the Early Cambrian oceanic crust beneath the Bendigo Zone was not subducted, and is preserved as a crustal-scale imbricate thrust stack. The seismic data have shown that a thin-skinned structural model appears to be valid for much of the Melbourne Zone, whereas the Stawell and Bendigo Zones have a thick-skinned structural style. Internal faults in the Stawell and Bendigo Zones are mostly west-dipping listric faults, which extend from the surface to near the base of the crust. The Heathcote Fault Zone, the boundary between the Bendigo and Melbourne Zones, extends to at least 20 km, and possibly to the Moho. A striking feature in the seismic data is the markedly different seismic character of the mid to lower crust of the Melbourne Zone. The deep seismic reflection data for the Melbourne Zone have revealed a multilayered crustal structure that supports the Selwyn Block model.  相似文献   

16.
The Gulf of Cadiz spans the plate boundary between Africa and Eurasia west of the Betic-Rif mountain belt. A narrow east dipping subduction zone descends beneath the Gulf of Cadiz and the straits of Gibraltar. The deep crustal structure of the Gulf and the adjacent SW Iberian and Moroccan margins is constrained by numerous multi-channel seismic reflection and wide-angle seismic surveys. A compilation of these existing studies is presented in the form of depth to basement, sediment thickness, depth to Moho and crustal thickness maps. These structural maps image an E-W trending trough, with thin (< 10 km) crust beneath the Gulf of Cadiz. This trough is filled by an eastward thickening wedge of sediments, reaching a thickness of 10-15 km in the eastern Gulf. These sediments are tectonically deformed, primarily along a series of westward-vergent thrust faults and represent a 200-250 km wide accretionary wedge. The northern and especially the southern limits of the accretionary wedge are marked by sharp morphological lineaments showing evidence of recent deformation. These tectonic limits are situated in an internal position with respect to the Miocene deformation front (external Betic and Rif allocthons), which has been abandoned. At the western boundary of the accretionary wedge, near the adjacent Seine and Horseshoe abyssal plains, an E-W trending basement high (Coral Patch Ridge) can be seen indenting the deformation front in an asymmetric manner. Analog modeling is performed using granular materials accreted against a semicircular backstop (representing the basement of the Rif and Betic mountain belts). The modeling initially produces a symmetric, arcuate accretionary wedge. The ensuing collision of an oblique rigid indenter retards accretion on one side, resulting in an embayment and a locally steeper deformation front. The deformation pattern observed in morphology and high-resolution seismic profiles suggests the accretionary wedge and underlying subduction system is still active. The implications of active subduction for the source region of the 1755 Lisbon earthquake and the regional seismic hazard assessment are discussed.  相似文献   

17.
青藏高原东北缘岩石圈密度与磁化强度及动力学含义   总被引：4，自引：0，他引：4  
利用横贯柴达木盆地南北的格尔木—花海子剖面岩石圈二维P波速度结构以及地震波速度与介质密度之间的关系,建立了该剖面岩石圈二维密度结构与二维磁化强度的初始模型。依据重磁同源原理,在柴达木盆地重、磁异常的二重约束下完成了重磁联合反演,获得了该剖面岩石圈二维密度结构与二维磁化强度分布。结果表明:柴达木盆地地壳厚度沿测线变化较大,平均厚度约60km。在柴达木盆地南缘地壳厚约50km,达布逊湖附近地壳最厚为63km左右,大柴旦附近地壳较薄,为50km左右。柴达木盆地的地壳纵向上可分为三层,即上地壳、中地壳与下地壳。位于盆地中部的中、下地壳分别发育大范围的壳内低密度体,并处于上地幔隆起的背景之上;横向上可将盆地分成南北两个部分,分界在达布逊湖附近。整个剖面结晶基底埋深变化也很大,在达布逊湖附近为12km,在昆仑山北缘基底几乎出露地表。结晶基底的展布形态与地壳底界,即莫霍面呈近似镜像对称。综合研究认为,柴达木盆地的岩石圈结构存在着明显的南北差异,其分界在达布逊湖的北面。在盆地南部,岩石圈介质横向变化较小,各层介质分布正常;在盆地的北侧,岩石圈结构特别在中、下地壳和上地幔顶部横向上发生了变化。壳内低密度体的存在意味着柴达木盆地具有较热的岩石圈和上地幔,加之基底界面与莫霍面的镜像对称分布,形成与准噶尔盆地和塔里木盆地的构造差异。多种地球物理参数所揭示的地壳上地幔结构及其横向变化特点为柴达木盆地构造演化及青藏高原北部边界的地球动力学研究提供了岩石圈尺度的地球物理证据。  相似文献   

18.
我们已完成了穿越准噶尔盆地及其周边地区的I-I、II-II、III-III、IV-IV和额敏—哈密剖面5条综合地球物理剖面。通过综合研究,初步了解准噶尔盆地及邻近地区的地球动力学问题:准噶尔盆地基底由北部的乌伦古地体和南部的玛纳斯地体组成。两者的分界为西西北方向的滴水泉—三个泉缝合线。其西部与北东向Dalbutte缝合带相连,东部与北西向的Cranamary缝合带相连。准噶尔盆地北部的乌伦古地体基底为双层构造,上层为泥盆系和下石炭统组成的褶皱基底,大致表现为北厚(3~5 km)、南薄(1~2 km)。缝合线以南的玛纳斯地体为单层基底,即新元古代结晶基底。准噶尔盆地地壳厚度为44~52 km,北薄南厚。周边山区地壳厚度高于盆地地区。盆地及邻近地区地壳分为上、中、下层,并且中地壳一般较薄。盆地地区的地壳存在多条深断裂。南北方向发育了6条主要深断裂,分别为红车、德伦山、石溪、呼图壁、彩南和阜康。这些断层倾角较大,向上延伸至上地壳下部,向下切入地壳基底界面。壳内水平构造和构造面无明显垂向断层,似有“开放断层”特征。这些断层是上地幔物质挤入地壳的良好通道。此外,该地区还有两条主要的横向深断层。一是北西西走向的滴水泉—三个泉深断裂,它向南倾斜,具有逆断层性质,可能会破坏滴水泉—三个泉缝合带。另一条是近东西向的昌吉—玛纳斯深断裂,向南倾斜,主要发育在中下地壳,具有逆断层性质。这些深断裂对盆地构造发育具有一定的控制作用。准噶尔盆地西部的莫霍面基本连续地延伸到了天山的莫霍面,并且后者的莫霍面深度明显大于前者。但是,盆地东部的莫霍面与博格达山脉的莫霍面并不连续。前者以叠加关系延伸到后者之下,表明盆地东部的地壳向博格达山脉俯冲。这有助于解释天山东部构造活动相对减弱而博格达山脉向北推高的构造地貌现象。周边准噶尔盆地具有挤压盆地-山地构造耦合格局,尤其是南部边界东部博格达—准东盆地的山地-盆地构造耦合。现在将准噶尔盆地与吐哈盆地分开的博格达山脉是年轻的、仍在上升的山脉。博格达山的隆升是印支运动以来多次推覆造山运动的反映,其现貌是新近纪以来新构造运动的结果。准噶尔盆地盖层发育经历了3个阶段:与天山和松潘—甘孜造山带形成有关的二叠纪—三叠纪前陆盆地阶段,区域压缩较弱的侏罗纪—早始新世陆内坳陷阶段,以及新近纪晚期以来与天山抬升有关的活化前陆盆地阶段。  相似文献   

19.
利用航磁、重力资料研究川滇地区大陆变形特征   总被引：1，自引：0，他引：1  
利用航磁、重力资料对川滇地区大陆变形特征进行了研究。航磁异常揭示了研究区内的基底性质及其横向差异,研究区内的强烈地震主要集中在航磁异常突变带上,基底性质横向差异有利于应力的相对集中,成为地震孕育和发生的有利部位。康定—绵阳一带刚性基底的阻挡造成了青藏高原下地壳物质向东的塑性流动被迫转向南东—南南东方向,进而造成了川滇菱形块体内广泛的地壳增厚,布格重力异常等值线呈向南东伸出的舌状是其地壳增厚作用的直观反映。川滇地区的大陆变形特征既存在广泛的地壳增厚现象,同时在下地壳塑性流动的驱动下,中、上地壳破碎成大小不一的块体,变形特征表现出整体刚性,因而不能简单地套用“地壳增厚”或“大陆逃逸”模式。  相似文献   

20.
An analysis of Bouguer gravity anomaly data and geothermal gradient data obtained from bottom hole and drill stem tests temperature is used to determine the crustal structure of the Sahel Basin in eastern Tunisia and its role in the maturation and location of the large number of oil and gas fields in the region. The regional Bouguer gravity anomaly field is dominated by gradual increase in values from the northwest to southeast and is may be caused by crustal thinning as revealed by regional seismic studies. In addition, higher geothermal gradients in the same region as the Bouguer gravity anomaly maximum add an additional constraint for the existence of crustal thinning in the region. A detailed analysis of the Bouguer gravity anomaly data was performed by both upward continuation and horizontal gradients. These two techniques were combined to show that the study area consists of two structural regions: (1) the North–South Axis (NOSA)–Zeramedine region which is characterized by northwest-dipping, northeast-striking faults, thicker crust (30–31 km) and low geothermal gradients, and (2) the Mahres–Kerkennah region which is characterized by vertical, northwest-striking faults, thinner crust (28–29 km) and higher geothermal gradients. The correlation of a variety of features includes mapped and geophysically defined faults, volcanic rocks, a thinned crust and high geothermal gradients within the same location as known oil and gas fields indicate that the faults are a major factor in the location of these petroleum accumulations.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号