首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 65 毫秒
1.
《Geodinamica Acta》2013,26(5):327-351
A geological study carried out in the southern part of the Larderello geothermal area (Northern Apennines) provides new information on the development mechanism and timing of the earlier extensional structures that formed during the Miocene post-collisional tectonics which affected the orogen. Staircase low-angle normal faults (LANFs) affected a multilayered thickened upper crust after the collisional stage, producing the lateral segmentation of the Tuscan Nappe, the deeper non-metamorphic tectonic unit of the Northern Apennines in the Tuscan area. The tectonic history recorded in two Tuscan Nappe discontinuous bodies revealed that the LANFs took place during the Middle–Late Miocene, displacing collisional structures developed from the Late Oligocene. These Tuscan Nappe bodies are delimited by detachment faults located at the base, within the Tuscan evaporites, and at the top within the Ligurian Units. Their western and eastern margins coincide with east-dipping ramps. These structures and the Tuscan Nappe bodies were later dissected by Pliocene–Quaternary high-angle normal faults. The reconstructed deformation history implies that the Tuscan Nappe bodies are extensional horses developed through an earlier asymmetrical east-dipping extensional duplex system, involved in block faulting during the later, Pliocene-Quaternary, stage of extension.  相似文献   

2.
The Vado di Corno Fault Zone (VCFZ) is an active extensional fault cutting through carbonates in the Italian Central Apennines. The fault zone was exhumed from ∼2 km depth and accommodated a normal throw of ∼2 km since Early-Pleistocene. In the studied area, the master fault of the VCFZ dips N210/54° and juxtaposes Quaternary colluvial deposits in the hangingwall with cataclastic dolostones in the footwall. Detailed mapping of the fault zone rocks within the ∼300 m thick footwall-block evidenced the presence of five main structural units (Low Strain Damage Zone, High Strain Damage Zone, Breccia Unit, Cataclastic Unit 1 and Cataclastic Unit 2). The Breccia Unit results from the Pleistocene extensional reactivation of a pre-existing Pliocene thrust. The Cataclastic Unit 1 forms a ∼40 m thick band lining the master fault and recording in-situ shattering due to the propagation of multiple seismic ruptures. Seismic faulting is suggested also by the occurrence of mirror-like slip surfaces, highly localized sheared calcite-bearing veins and fluidized cataclasites. The VCFZ architecture compares well with seismological studies of the L'Aquila 2009 seismic sequence (mainshock MW 6.1), which imaged the reactivation of shallow-seated low-angle normal faults (Breccia Unit) cut by major high-angle normal faults (Cataclastic Units).  相似文献   

3.
《Geodinamica Acta》2013,26(6):375-387
Information from surface and subsurface geology (boreholes and seismic reflection lines) are used to depict the geometry of the extensional structures (low-angle normal faults and related Tuscan Nappe megaboudins) affecting the Mt. Amiata geothermal area and developed during the early stage of the extensional tectonics which affected the inner Northern Apennines and Tyrrhenian Sea from the Early-Middle Miocene. Normal faulting involved the thickened middle-upper crust after the collisional stage and, in the Mt. Amiata region, took place over relatively short periods (5-7 Ma) characterised by rapid extensional strain rates. Normal faults showing articulated geometry (flat-ramp-flat) characterised by subhorizontal detachments (flats) and synthetic ramps, caused widespread megaboudinage mainly in the sedimentary tectonic units and particularly in the Tuscan Nappe. Evaporites occurring at the base of the Tuscan Nappe, the deepest sedimentary tectonic unit of the Northern Apennines, controlled the geometry of the faults, and rift-raft tectonics may be the style of this first extensional phase. Three Tuscan Nappe extensional horses (megaboudins) have been recognised in the subsurface of the Mt. Amiata area. They are characterised, in map view, by elliptical shapes and show a mean NNW-SSE lengthening. They are delimited at the base and at the top by east-dipping flats, while their western and eastern margins coincide with east-dipping ramps. On the whole, considering their geometrical features, these megaboudins correspond to extensional horses belonging to an asymmetrical east-dipping extensional duplex system.

Rollover anticlines deformed the western ramp of the megaboudins and rotated the uppermost flat as well as all the structures previously developed, which became steeply-dipping to the west.  相似文献   

4.
Fault tip regions, relay ramps and accommodation zones in between major segments of extensional fault systems provide zones of additional structural and stratigraphic complexities and also significantly affect their hydraulic behaviour. The great interest for both academic and industrial purposes encouraged specific studies of fault tip regions that, in some cases, produced controversial results. We approached the study of fault tip regions by integrating structural, AMS and stratigraphic analyses of the tip of an extensional growth fault system in the Tarquinia basin, on the Tyrrhenian side of the Northern Apennines. Detailed structural mapping indicates the occurrence of systematic relationships between the orientation of the main subsidiary fault zones, the orientation and position of the two main joint sets developed in the fault damage zones, and the overprinting relationships between the two main joint sets themselves. Microstructural analysis of fault core rocks indicates a progression of deformation from soft-sediment to brittle conditions. The AMS study supports the evolution of deformation under a constantly oriented stress field. By combining this multidisciplinary information we propose an evolutionary model for the tip of the extensional growth fault system that accounts for the progressively changing sediment rheological properties, and for the time dependent subsidiary deformation pattern by invoking the interplay between the regional stress field and the local, kinematically-derived one by fault activity. We also speculate on the overall implications for fluid flow of the proposed evolutionary model.  相似文献   

5.
This paper discusses the possible influence of syn-sedimentary structures on the development of orogenic structures during positive tectonic inversion in the inner Northern Apennines (Italy). Examples from key areas located in southern Tuscany provided original cartographic, structural and kinematics data for Late Oligocene-Early Miocene thrusts, organized in duplex systems, verging in the opposite direction of the foreland propagation (back-thrusts), which affected the Late Triassic-Oligocene sedimentary succession of the Tuscan Domain, previously affected by pre-orogenic structures. These latter consist of mesoscopic-to cartographic-scale Jurassic syn-sedimentary normal faults and extensional structures, which gave rise to effective stratigraphic lateral variation and mechanical heterogeneities. Structural analysis of both syn-sedimentary faults and back-thrusts were therefore compared in order to discuss the possible role of the pre-existing anisotropies in influencing the evolution of the back-thrusts. As a result, it can be reasonably proposed that back-thrusts trajectories and stacking pattern were controlled by relevant syn-sedimentary normal faults; these latter were reactivated, in some cases, if properly oriented. Such an issue adds new inputs for discussing the potential role of structural inheritance during tectonic inversions, and helps to better understand the processes suitable for the development of back-thrusts in the inner zones of orogenic belts, as it is the case of the inner Northern Apennines.  相似文献   

6.
This paper deals with the tectonic control on the hydrothermal system that gave rise to Sb–Hg ore deposits in the Monte Amiata area that was one of the most relevant mining district for the exploitation of mercury in Italy. The study area (Selvena mining district) is located in southern Tuscany (inner Northern Apennines) one of the most important mineralized area in the western Mediterranean region. Southern Tuscany was severely affected by Middle–Late Miocene low-angle normal faults, later dissected by Pliocene–Pleistocene faults, coeval magmatism (Late Miocene–Pleistocene) and hydrothermal activity (Pliocene–Present). The Selvena mining district is located south of Middle Pleistocene Monte Amiata volcanic complex. Our structural and kinematic study is based on the integration among fieldwork, borehole and mine data. The results highlight two Pleistocene–Holocene left-lateral transtensional shear zones linked by normal faults, defining a coeval pull-apart structure. Here, the Sb–Hg mineralization, transported by meteoric hydrothermal fluids mainly, is particularly diffuse and concentrated in the cataclasites and in damage zones of the normal faults. Furthermore, a widespread mineralization also occurs in the cataclasites of Miocene low-angle normal faults. Mine evidence suggests that ore-bearing fluids percolated through structural conduits located along the fault planes and resulting parallel to the intermediate stress axis. Geological structures and ore deposit distribution are related to a single hydrothermal circuit, with meteoric water channelled to depth through conduits parallel to the intermediate stress axis of the transcurrent shear zones; then, hydrothermal fluids mainly ascended through the almost vertical deformation zones located at the intersection between normal and strike-slip faults. Thus, hydrothermal fluids permeated also the Middle–Late Miocene cataclasites. This study shed light on the relationships between geological structures and mineralization in southern Tuscany and underlines the importance to investigate mine areas to understand hydrothermal fluids path.  相似文献   

7.
The Gubbio fault is an active normal fault defined by an important morphological scarp and normal fault focal mechanism solutions. This fault truncates the inherited Miocene Gubbio anticline and juxtaposes Mesozoic limestones in the footwall against Quaternary lacustrine deposits in the hanging wall. The offset is more than 2000 m of geological throw accumulated during a poly-phased history, as suggested by previous works, and has generated a complex zone of carbonate-rich fault-related structures. We report the results of a multidisciplinary study that integrates detailed outcrop and petrographic analysis of two well-exposed areas along the Gubbio fault zone, geochemical analysis (fluid inclusions, stable isotopes, and trace elements) of calcite-sealed fault-related structures and fault rocks, and biostratigraphic controls. Our aims are: (i) the characterization of the deformation features and their spatial–temporal relationships, and (ii) the determination of the P/T conditions and the fluid behaviour during deformation to achieve a better understanding of fluid–rock interaction in fault zones.We show that few of the observed structures can be attributed to an inherited shortening phase while the most abundant structures and fault rocks are related to extensional tectonics. The outcropping extensional patterns formed at depths less than 2.5–3 km, in a confined fluid system isolated from meteoric water, and the fault structures are the response to a small amount of cumulated displacement, 12–19% of the total geological throw.  相似文献   

8.
The role of hydrothermal fluids in assisting the activity of strike-slip faults is investigated using a range of new geological, geophysical, and geochemical data obtained on the Argentat fault, Massif Central, France. This fault zone, 180-km-long and 6 to 8 km-width, has experienced coeval intense channeling of hydrothermal fluids and brittle deformation during a short time span (300–295 Ma). According to seismic data, the fault core is a 4-km-wide, vertical zone of high fracture density that rooted in the middle crust (~ 13 km) and that involved fluids in its deeper parts (9–13 km depth). If stress analyses in the fault core and strain analyses in the damage zone both support a left-lateral movement along the fault zone, it is inferred that hydrothermal fluids have strongly influenced fault development, and the resulting fault has influenced fluid flow. Fluid pressure made easier fracturing and faulting in zones of competent rocks units and along rheological boundaries. Repeated cycles of increase of fault-fracture permeability then overpressure of hydrothermal fluids at fault extremity favored strong and fast development of the crustal-scale strike-slip fault. The high permeability obtained along the fault zone permitted a decrease of coupling across the weak fault core. Connections between shallower and lower crustal fluids reservoirs precipitate the decrease of fault activity by quartz precipitation and sulfides deposition. The zones of intense hydrothermal alteration at shallows crustal levels and the zones of fluid overpressure at the base of the upper crust both controlled the final geometry of the crustal-scale fault zone.  相似文献   

9.
粤北南雄陆相红色盆地及其紧邻的诸广山花岗岩区,是中国重要的花岗岩型铀成矿带。研究表明,南雄断裂带属于伸展体系下的低角度剥离断层,为浅层次的热隆伸展构造,断裂带上部为脆性变形层,下部为韧性变形层,既是导矿构造。又是储矿构造。钻孔岩心揭露表明,断裂带岩石包括构造角砾岩、碎裂岩和糜棱岩。岩石具有显著的碱交代蚀变特征,部分糜棱岩后期遭受构造作用产生破碎,且有基性岩脉穿插。样品地球化学特征分析表明,碱交代和糜棱岩化程度与铀元素的富集有对应关系。这一规律性说明岩石的碱交代和糜棱岩化对铀富集的空间分布有重要作用。  相似文献   

10.
《地学前缘(英文版)》2019,10(6):2093-2100
In quartzo-feldspathic continental crust with moderate-to-high heat flow,seismic activity extends to depths of 10-20 km,bounded by isotherms in the 350-450 C range.Fluid overpressuring above hydrostatic in seismogenic crust,is heterogeneous but tends to develop in the lower seismogenic zone(basal seismogenic zone reservoir=b.s.z.reservoir) where the transition between hydrostatically pressured and overpressured crust is likely an irregular,time-dependent.3-D interface with overpressuring concentrated around active faults and their ductile shear zone roots.The term Arterial Fault is applied to fault structures that root in portions of the crust where pore fluids are overpressured(i.e.at hydrostatic pressure) and serve as feeders for such fluids and their contained solutes into overlying parts of the crust.While arterial flow may occur on any type of fault,it is most likely to be associated with reverse faults in areas of horizontal compression where fluid overpressuring is most easily sustained.Frictional stability and flow permeability of faults are both affected by the state of stress on the fault(shear stress,τ;normal stress,σ_n),the level of pore-fluid pressure,P_f,and episodes of fault slip,allowing for a complex interplay between fault movement and fluid flow.For seismically active faults the time dependence of permeability is critical,leading to fault-valve behaviour whereby overpressures accumulate at depth during interseismic intervals with fluid discharged along enhanced fault-fracture permeability following each rupture event.Patterns of mineralization also suggest that flow along faults is non-uniform,concentrating along tortuous pathways within the fault surface.Equivalent hydrostatic head above ground level for near-lithostatic overpressures at depth(1.65×depth of zone) provides a measure of arterial potential.Settings for arterial faults include fault systems developed in compacting sedimentary basins,faults penetrating zones of active plutonic intrusion that encounter overpressured fluids exsolved from magma,together with those derived from contact metamorphism of fluid-rich wallrocks,and/or from regional devolatilisation accompanying prograde metamorphism.Specially significant are active faults within accretionary prisms rooted into overpressured subduction interfaces,and steep reverse faults activated by high overpressures from b.s.z.reservoirs during compressional inversion.  相似文献   

11.
Faults in carbonates are well known sources of upper crustal seismicity throughout the world. In the outer sector of the Northern Apennines, ancient carbonate-bearing thrusts are exposed at the surface and represent analogues of structures generating seismicity at depth. We describe the geometry, internal structure and deformation mechanisms of three large-displacement thrusts from the km scale to the microscale. Fault architecture and deformation mechanisms are all influenced by the lithology of faulted rocks. Where thrusts cut across bedded or marly limestones, fault zones are thick (tens of metres) and display foliated rocks (S-CC′ tectonites and/or YPR cataclasites) characterized by intense pressure-solution deformation. In massive limestones, faulting occurs in localized, narrow zones that exhibit abundant brittle deformation. A general model for a heterogeneous, carbonate-bearing thrust is proposed and discussed. Fault structure, affected by stratigraphic heterogeneity and inherited structures, influences the location of geometrical asperities and fault strain rates. The presence of clay minerals and the strain rate experienced by fault rocks modulate the shifting from cataclasis-dominated towards pressure-solution-dominated deformation. Resulting structural heterogeneity of these faults may mirror their mechanical and seismic behaviour: we suggest that seismic asperities are located at the boundaries of massive limestones in narrow zones of localized slip whereas weak shear zones constitute slowly slipping portions of the fault, reflecting other types of “aseismic” behaviour.  相似文献   

12.
The 3-D seismic tomographic data are used together with field, core and well log structural information to determine the detailed 3-D architecture of fault zones in a granitic massif of volume 500×575×168 m at Mina Ratones area in the Albalá Granitic Pluton. To facilitate the integration of the different data, geostatistical simulation algorithms are applied to interpolate the relatively sparse structural (hard) control data conditioned to abundant but indirect 3-D (soft) seismic tomographic data. To effectively integrate geologic and tomographic data, 3-D migration of the velocity model from the time domain into the depth domain was essential. The resulting 3-D model constitutes an image of the fault zone architecture within the granitic massif that honours hard and soft data and provides an evaluation of the spatial variability of structural heterogeneities based on the computation of 3-D experimental variograms of Fracture Index (fault intensity) data. This probabilistic quantitative 3-D model of spatially heterogeneous fault zones is suitable for subsequent fluid flow simulations. The modeled image of the 3-D fault distribution is consistent with the fault architecture in the Mina Ratones area, which basically consists of two families of subvertical structures with NNE–SSW and ENE–WSW trends that displaces the surfaces of low-angle faults (North Fault) and follows their seismically detected staircase geometry. These brittle structures cut two subvertical dykes (27 and 27′ Dykes) with a NNE–SSW to N–S trend. The faults present high FI (FI>12) adjacent bands of irregular geometry in detail that intersect in space delimiting rhombohedral blocks of relatively less fractured granite (FI<6). Both structural domains likely correspond with the protolith and the damaged zone/fault core in the widely accepted model for fault zone architecture. Therefore, the construction of 3-D grids of the FI in granitic areas affected by brittle tectonics permits the quantitative structural characterization of the rock massif.  相似文献   

13.
Previous studies [O'Kane, A., Onasch, C.M., Farver, J., 2007. The role of fluids in low-temperature, fault-related deformation of quartz arenite. Journal of Structural Geology 29, 819--836; Cook, J., Dunne, W.M., Onasch, C.M., 2006. Development of a dilatant damage zone along a thrust relay in a low-porosity quartz arenite, Journal of Structural Geology 28, 776–792] found that quartz arenite within two fault zones in the Appalachian foreland thrust belt displays very different structural styles and histories despite deforming at similar pressures and temperatures during the Alleghanian orogeny. A comparison of the grain-scale deformation and fluid histories using transmitted and cathodoluminescence microscopy and fluid inclusion microthermometry, shows that fluid composition was a controlling factor for causing these differences. The Cove fault zone deformed in the presence of aqueous fluids, first a CaCl2 brine and then an iron-rich fluid. The precipitation of quartz cement from the brine kept pace with brittle deformation, maintaining overall rock cohesion in the fault zone. The introduction of iron-rich fluids caused a switch from precipitation to dissolution of quartz, along with precipitation of goethite. In a damage zone along a backthrust in the Cave Mountain anticline, early deformation occurred in the presence of an aqueous fluid from which quartz was precipitated. The latest deformation, however, occurred in the presence of a methane-rich fluid, which inhibited the precipitation of quartz cement producing porous breccias and open fractures despite deformation at 6 km depth. Fluid composition not only affected cementation in the fault zones, but also the selection of grain-scale deformation mechanisms. Therefore, it is a controlling factor in determining the behavior and strength of these fault zones.  相似文献   

14.
Two-dimensional, elastic, plane-strain, finite element models (FEMs) are generated to study the state of stress and failure induced by a low-angle normal fault, the Alto Tiberina Fault of the Northern Apennines (central Italy): it is beyond the scope of the present work to show that slip can occur on such a fault. The numerical study was performed to evaluate the influences on the local stress field of the litho-mechanical stratification of formations surrounding the fault, and those induced by the geometry of the fault. The performed models have shown the important role played by evaporites and basement formations of the Umbria-Marche succession as seismogenetic layers. The model results have also underlined that the flat-ramp geometry of the fault induces high relative concentration of stresses in correspondence with the low-angle, east-dipping, synthetic normal faults observed today in shallow depth near the Alto Tiberina surface trace. The stress regime predicted by the final model, in which the behavior of the Alto Tiberina together with the antithetic normal fault of Gubbio was simulated, reconciles available geological and geophysical observable to a greater extent. The numerical results can assist interpretation of the tectonic evolution of the region.  相似文献   

15.
Geological mapping coupled with structural investigations carried out in the Voltri Massif (eastern Ligurian Alps, Italy) provide new data for the interpretation of the tectonic context controlling main fabric development during exhumation of its high-pressure core. The Voltri Massif is here interpreted as a c. 30 km-long eclogite-bearing, asymmetric dome formed by the progressive verticalisation of the regional, second-phase mylonitic foliation developed during retrogressive greenschist metamorphic conditions. In this light, the exhumation history is driven by a ductile-to-brittle extensional process, operating through low-angle, top-to-the-W multiple detachment systems. A Late Eocene–Early Oligocene age for this extensional episode is proposed on the basis of structural correlations, stratigraphic and radiometric constraints. In this scenario, the Voltri Massif is interpreted as an extensional domain developed to accommodate the Late Eocene–Early Oligocene arching of the Western Alps–Northern Apennines orogenic system.  相似文献   

16.
Out-of-sequence thrusts (OSTs) exposed in ancient accretionary prisms are considered as fossil analogs of present-day megasplay faults in subduction margins and can provide direct information about the conditions of deformation during thrust activity. In modern as well as in ancient accretionary prisms, first-order megasplay faults or OSTs truncate or merge with faults of lesser importance called second-order OSTs. Structural analysis of the Makinokuchi fault, a branch of an Oligocene to lower Miocene second-order OST in the Tertiary Shimanto Belt of central Kyushu, SW Japan, brings information about the conditions of deformation at the time of thrusting. The studied exposure shows that the fault footwall and, to a much lesser extent, the fault hanging-wall, consist of quartz-cemented syntectonic dilatant hydraulic breccias testifying to pore fluid pressures larger than the least principal stress component. The footwall sandstones are crossed by several centimeters thick quartz veins that merge with the footwall breccias. The continuity between the veins and the breccias suggest that the veins acted as conduits which likely collected fluids from the footwall side sandstones upward and toward the fault. Fluid inclusions indicate that the quartz cementing the breccias and that filling the feeder veins crystallized from similar fluids and under similar pressure and temperature conditions (245–285 °C and 5–8 km depth). These similarities suggest that the fluids responsible for syn-tectonic hydraulic brecciation were collected from the footwall through the conduits. The fluid inclusion trapping temperatures are close to the temperatures expected to be reached along the seismogenic zone. Our analysis shows that fluid overpressures can play a key role in the growth and activity of second-order OSTs in accretionary prisms and suggests that fluids collected along second-order OSTs or splay faults may flow upward along first-order OSTs or megasplay faults.  相似文献   

17.
1800 m of drill core through the Nojima fault zone, Japan, reveals subsidiary fault and fracture networks that developed in the fault zone that triggered the 1995 Ms 7.2 Kobe earthquake. The subsidiary fault zones contain a fault gouge of < 1 cm bounded by thin zones of foliated cataclasite or breccia. Fractures are filled with calcite veins, calcite-cemented breccias, clay, and iron-oxide and carbonate alternation of the granitic host rock. These features are typical of extensional fractures that form the conduit network for fluid flux close to a major fault zone. The zone of distributed deformation surrounding the main fault is 50 m in width, and the dip of the Nojima fault at > 1 km depth is 75°. The fault-fracture networks associated with the Nojima fault zone are coseismic and were filled with carbonate and fine-grained material during repeated seismic-related infiltration of the fault zone by carbonate-bearing subsurface water. This study shows that fault-related fracture networks plays an important role as fluid flow conduits within seismically active faults, and can change in character from zones of high permeability to low permeability due to cementation and/or pore collapse.  相似文献   

18.
The geometry and architecture of a well exposed syn-rift normal fault array in the Suez rift is examined. At pre-rift level, the Nukhul fault consists of a single zone of intense deformation up to 10 m wide, with a significant monocline in the hanging wall and much more limited folding in the footwall. At syn-rift level, the fault zone is characterised by a single discrete fault zone less than 2 m wide, with damage zone faults up to approximately 200 m into the hanging wall, and with no significant monocline developed. The evolution of the fault from a buried structure with associated fault-propagation folding, to a surface-breaking structure with associated surface faulting, has led to enhanced bedding-parallel slip at lower levels that is absent at higher levels. Strain is enhanced at breached relay ramps and bends inherited from pre-existing structures that were reactivated during rifting. Damage zone faults observed within the pre-rift show ramp-flat geometries associated with contrast in competency of the layers cut and commonly contain zones of scaly shale or clay smear. Damage zone faults within the syn-rift are commonly very straight, and may be discrete fault planes with no visible fault rock at the scale of observation, or contain relatively thin and simple zones of scaly shale or gouge. The geometric and architectural evolution of the fault array is interpreted to be the result of (i) the evolution from distributed trishear deformation during upward propagation of buried fault tips to surface faulting after faults breach the surface; (ii) differences in deformation response between lithified pre-rift units that display high competence contrasts during deformation, and unlithified syn-rift units that display low competence contrasts during deformation, and; (iii) the history of segmentation, growth and linkage of the faults that make up the fault array. This has important implications for fluid flow in fault zones.  相似文献   

19.
伸展型脆-韧性剪切带对沃溪钨锑金矿床的构造控制   总被引：6，自引：0，他引：6  
湖西沃溪钨锑金矿床受控于一条伸展型顺层脆-韧性剪切带。带内岩石在非共轴顺层剪切构造动力作用下发生变形分解，形成泥质构造根岩强变形带和砂质构造根岩弱变形域。泵吸中心-弱变形城中的承压矿液沿砂质构造根岩的ab面发生水力压裂而产生“D”型张剪裂隙。构造-流体双重动力系统的周期性振荡使主裂隙系统发生周期性的破裂-愈合作用而形成条带状复脉。矿液是通过隐蔽的低角度正断层、强变形带内的构造面理及弱变形城中的微裂隙系统运移的，说明在靠近滑脱面的弱变形城中水力压裂作用会增强，其矿化类型将以蚀变岩型为主、脉型为辅。  相似文献   

20.
Meso- and micro-structural studies of the well-exposed Balduini Thrust (Northern Apennines, Italy) indicate that the structure formed during a single folding event, contemporaneous with diagenesis, and is a zone comprising curved, en-échelon fault segments. The geometry of each segment is arcuate with pure compression at one end and right-lateral displacement along the other. The thrust developed during the Tortonian within a single mud-rich formation, the Upper Eocene–Upper Oligocene Scaglia Cinerea, but rheological variations within the unit led to differences in deformation style; zones of scaly fabric are discontinuous and calcite veins vary in abundance. The mesoscopic morphology of the veins and the distribution of calcium carbonate along the formation indicate variations in the distribution of fluids at the time of deformation, which affected both diagenesis and the structural response of the material. Systematic variations of mechanical properties within the thickness of the Scaglia Cinerea Formation account for the curvature of the propagating thrust. Together with the heterogeneity of the stress field, the confinement of the arcing thrust to this single, weak unit lead to repeated initiation of new fractures and hence segmentation of the propagating thrust. Geometric analysis of the calcite veins and their microscopic characters suggests that hydrofracturing was involved, with the Scaglia Cinerea Formation experiencing high fluid pressure followed by rapid water expulsion. The Balduini Thrust is therefore an example of a fluid-driven, refracted compound shear zone. The analysis presented here provides insights into the three-dimensional arrangement of fault zones and fluid-migration patterns during regional faulting.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号