首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The Nojima Fault Zone Probe was designed to study the properties and healing processes of the Nojima fault, which is the surface fault rupture of the Hyogo-ken Nanbu earthquake (M7.2) of 1995 (1995 Kobe earthquake). In this project, water injection experiments were conducted in a borehole of 1800 m depth at the Nojima fault. We set up electrodes around the borehole and observed self-potential variations to investigate the magnitude of electrokinetic and hydraulic parameters around the Nojima fault zone. In the 1997 experiment, self-potential variations were in the range of a few to about 20 mV across 320–450 m electrode dipoles with hydraulic pressure variations from 3.5 to 4 MPa. In the 2000 experiment, self-potential variations were in the range of a few to about 85 mV across 160–260 m electrode dipoles with the hydraulic pressure variations from 3 to 4.5 MPa. In the 2003 experiment, self-potential variations were in the range of a few to about 30 mV across 20–80 m electrode dipoles with hydraulic pressure of 4 MPa. These observed self-potential variations were explained well with an electrokinetic effect due to the underground flow of the injected water. From the observed results, we estimated that the ratio of hydraulic parameters (permeability, porosity, and tortuosity) to electrokinetic parameters (zeta potential and dielectric constant) decreased approximately 40% during eight years after the earthquake. This result suggests that the healing process around the fault zone progress.  相似文献   

2.
Water injection experiments were performed in 1997, 2000 and 2003 at the 1800 m borehole near the fracture zone of the 1995 Hyogo-ken Nanbu earthquake. During these experiments, a contraction of about 10− 8–10− 7 was observed with three-component strainmeters at a bottom of the 800 m borehole, 70 m southwest of the 1800 m borehole. We estimated hydraulic properties of the fracture zone near the Nojima fault by using the strain data to investigate a healing of the fault during the postseismic stage. We calculated pore pressure changes due to the water injection using Darcy's equation and obtained strain changes due to the pore pressure changes as elastic deformations of the crust. The calculated strain changes have a nearly agreement with the observed strain changes. Hydraulic conductivity in 1997, 2000 and 2003 was determined to be 0.9 ± 0.2 × 10− 6, 0.8 ± 0.2 × 10− 6 and 0.4 ± 0.1 × 10− 6 m/s, respectively. The reduced hydraulic conductivities in 2000 and 2003 suggest that the fractures had been healing.  相似文献   

3.
The active fault drilling at Nojima Hirabayashi after the 1995 Hyogoken-nanbu (Kobe) earthquake (MJMA = 7.2) provides us with a unique opportunity to investigate subsurface fault structure and the in-situ properties of fault and fluid. The borehole intersected the fault gouge of the Nojima fault at a depth interval of 623 m to 625 m. The lithology is mostly Cretaceous granodiorite with some porphyry dikes.The fault core is highly permeable due to fracturing. The borehole water was sampled in 1996 and 2000 from the depth interval between 630 and 650 m, just below the fault core. The chemical and isotopic compositions were analyzed. Carbon and oxygen isotope ratios of carbonates from the fault core were analyzed to estimate the origin of fluid.The following conclusions were obtained. (1) The ionic and isotopic compositions of borehole water did not change from 1996 to 2000. They are mostly derived from local ground water as mentioned by Sato and Takahashi [Sato, T., Takahashi, M., 2000. Chemical and isotopic compositions of groundwater obtained from the Hirabayashi well. Geological Survey of Japan Interim Report No. EQ/00/1, 187–192.]. (2) Geochemical speciation revealed that the borehole water was derived from a relatively deep reservoir, which may be situated at a depth of 3 to 4 km where the temperature is about 80–90 °C. (3) The shallower part of the Nojima fault (shallower than the reservoir depth) has not been healed from the hydrological viewpoints 5 years after the event, in contrast to the rapid healing detected by S wave splitting [Tadokoro, K., Ando, M., 2002. Evidence for rapid fault healing derived from temporal changes in S wave splitting, Geophys. Res. Lett., 29, 10.1029/2001GL013644.]. (4) Precipitation of calcite from the present borehole water since drilling supports the idea of precipitation of some calcite in coseismic hydraulic fractures in the fault core [Boullier, A-M., Fujimoto, K., Ohtani, T., Roman-Ross, G., Lewin, E., Ito, H., Pezard, P., Ildefonse, B., 2004. Textural evidence for recent co-seismic circulation of fluids in the Nojima fault zone, Awaji Island, Japan., Tectonophysics, 378, 165–181.]. (5) Carbon and oxygen isotope ratios of calcite indicated that the meteoric water flux had been localized at the fault core. (6) A difference in the carbon isotope ratio between the footwall and the hanging wall suggests that the fault has been acted as a hydrologic barrier, although the permeability along the fault is still high.  相似文献   

4.
Three boreholes were drilled near the Nojima fault, which the 1995 Hyogoken–Nanbu earthquake occurred on. In order to research the properties and the healing process of the fault, water injection experiments were conducted every 3 years. In this report, we researched the permeability of the fault as a measurement of crack density or porosity of the fault zone. Pore water pressure changes in rock due to the water injections at one borehole were observed as discharge changes or groundwater level changes at the other borehole. Using numerical calculations, the permeability of the fault fracture zone was estimated for each experiment. The permeability has been decreasing as time passed, which is thought to show the fault healing process of the Nojima fault after the 1995 Hyogoken–Nanbu earthquake.  相似文献   

5.
Fission-track (FT) thermochronologic analysis was performed on zircon separates from rocks in and around the Nojima fault, which was activated during the 1995 Kobe earthquake. Samples were collected from the University Group 500 m (UG-500) borehole and nearby outcrops. FT lengths in zircons from localities > 25 m away from the fault plane as well as one 0.1 m away from the fault in the footwall are characterized by concordant mean values of  10–11 μm and unimodal distributions with negative skewness, which showed no signs of appreciable reduction in FT length. In contrast, those adjacent (< 3 m) to the fault at depths on the hanging wall side showed significantly reduced mean track lengths of  6–8 μm and distributions having a peak around 6–7 μm with rather positive skewness. The former pattern is interpreted to reflect cooling through the zircon partial annealing zone (ZPAZ), without later, partial thermal overprints. The latter indicates substantial track shortening due probably to secondary heating by a thermal event(s) that locally perturbed the geothermal structure. Modeled zircon FT length and age data of partially annealed samples from the UG-500 borehole revealed a cooling episode in the ZPAZ that started at  4 Ma within  3 m from the fault plane, whereas those from the Geological Survey of Japan 750 m borehole record cooling started at  31–38 Ma within  25 m from the fault. On the basis of one-dimensional heat conduction modeling as well as the consistency between the degree of FT annealing and the degree of deformation/alteration of borehole rocks, these cooling ages in both boreholes are interpreted as consequences of ancient thermal overprints by heat transfer or dispersion via fluids in the fault zone. Together with the zircon FT data of a pseudotachylyte layer recently analyzed, it is suggested that the present Nojima fault system was reactivated in the Middle Quaternary from an ancient fault initiated at  56 Ma at mid-crustal depths. Also shown is a temporal/spatial variation in terms of the thermal anomalies recorded in the fault rocks, implying heterogeneity of hot fluid flows in the fault zone.  相似文献   

6.
H. Austrheim  T. Prestvik   《Lithos》2008,104(1-4):177-198
  相似文献   

7.
碳酸盐岩断裂破碎带结构、分布与发育机制   总被引：1，自引：0，他引：1  
断裂带通常包括狭窄的断层核与宽阔的破碎带,并对岩石物理及其水力学、流体与渗透性具有重要作用。根据断裂破碎带结构的差异,将碳酸盐岩断层核划分为颗粒支撑、基质支撑与胶结支撑等3种类型,将碳酸盐岩破碎带划分碎裂带与裂缝带。不同类型碳酸盐岩断层核与破碎带形成多种类型组合,并造成断裂破碎带多种复杂的渗流结构。通过井一震资料的结合,可以判识沉积盆地内部较宽的碳酸盐岩断裂破碎带,其宽度一位移关系可以指示断裂破碎带的不同生长方式与机制。复杂内部结构、多期构造成岩作用与non-Andersonian破裂机制可能导致碳酸盐岩断裂破碎带的异常生长,也是碳酸盐岩断裂破碎带机理研究的重要方向。  相似文献   

8.
Burial depth, cumulative displacement, and peak temperature of frictional heat of a fault system are estimated by thermal analysis in the fold–thrust belt of the Western Foothills complex, western Taiwan based on the vitrinite reflectance technique. The regional thermal structure across the complex reveals that the rocks were exposed to maximum temperatures ranging from 100 °C to 180 °C, which corresponds to a burial depth of 3.7–6.7 km. A large thermal difference of 90 °C were observed at the Shuilikeng fault which make the eastern boundary of the fold–thrust belt where it is in contact with metamorphic rock of Hsuehshan Range. The large thermal difference corresponds to cumulative displacements on the Shuilikeng fault estimated to be in the range of 5.2–6.9 km. However, thermal differences in across the Shuangtung and Chelungpu faults cannot be determined apparently due to small vertical offsets. The large displacement observed across the Shuilikeng fault is absent at the other faults which are interpreted to be younger faults within the piggyback thrust system. Localized high temperatures adjacent to fault zones were observed in core samples penetrating the Chelungpu fault. Three major fracture zones were observed at core lengths of 225 m, 330 m, and 405 m and the two lower zones which comprise dark gray narrow shear zones. A value of vitrinite reflectance of 1.8%, higher than the background value of 0.8%, is limited at a narrow shear zone of 1 cm thickness at the fracture zone at 330 m. The estimated peak temperature in the range of 550–680 °C in the shear zone is far higher than the background temperature of 130 °C, and it is interpreted as due to frictional heating during seismic faulting.  相似文献   

9.
We have analyzed the Nojima fault NIED 1800 m drill core samples by ESR (Electron Spin Resonance) to detect seismic frictional heating events, especially during the 1995 Kobe Earthquake. Dark gray fault gouge with foliation > 10 cm away from the fault plane at about 1140 m in depth, which was produced by ancient fault movements, has a FMR (ferrimagnetic resonance) signal. Heating experiments show that this FMR signal is derived from ferrimagnetic trivalent ion oxides (γ-Fe2O3: maghemite) with imperfect crystallinity, which is produced by thermal dehydration of γ-FeOOH (lepidocrocite) or Fe(OH)3 (limonite). The existence of the FMR signal means that dry heating such as frictional heating once occurred, and that the frictional heat temperature along the dark gray fault gouge may have risen to over 350 °C during ancient seismic fault slip. In order to detect frictional heating events in fault zones, the increase of the FMR signal and the color change of fault gouge into dark gray or black are important indexes. On the other hand, no FMR signal is detected from the fault gouges just on two fault planes at about 1140 m and 1300 m in depth, which are considered to be possible main fault planes in the 1995 Kobe Earthquake. These two fault planes may not have played an important role of fault slip in the Earthquake.  相似文献   

10.
An 1800-m-deep borehole into the Nojima fault zone was drilled at Nojima-Hirabayashi, Japan, after the 1995 Hyogo-ken Nanbu (Kobe) earthquake. Three possible fracture zones were detected at depths of about 1140, 1300, and 1800 m. To assess these fracture zones in this recently active fault, we analyzed the distributions of fault rocks, minerals, and chemical elements in these zones. The central fault plane in the shallowest fracture zone was identified by foliated blue-gray gouge at a depth of 1140 m. The degree of fracturing was evidently greater in the hanging wall than in the footwall. Minerals detected in this zone were quartz, orthoclase, plagioclase, and biotite, as in the parent rock (granodiorite), and also kaolinite, smectite, laumontite, stilbite, calcite, ankerite, and siderite, which are related to hydrothermal alteration. Biotite was absent in both the hanging wall and footwall across the central fault plane, but it was absent over a greater distance from the central fault plane in the hanging wall than in the footwall. Major element compositions across this zone suggested that hydrothermal alteration minerals such as kaolinite and smectite occurred across the central fault plane for a greater distance in the hanging wall than in the footwall. Similarly, H2O+ and CO2 had higher concentrations in the hanging wall than in the footwall. This asymmetrical distribution pattern is probably due to the greater degree of wall–rock fracturing and associated alteration in the hanging wall. We attributed the characteristics of this zone to fault activity and fluid–rock interactions. We analyzed the other fracture zones along this fault in the same way. In the fracture zone at about 1300 m depth, we detected the same kinds of hydrothermal alteration minerals as in the shallower zone, but they were in fewer samples. We detected relatively little H2O+ and CO2, and little evidence for movement of the major chemical elements, indicating little past fluid–rock interaction. In the fracture zone at about 1800 m depth, H2O+ and CO2 were very enriched throughout the interval, as in the fracture zone at about 1140 m depth. However, smectite was absent and chlorite was present, indicating the occurrence of chloritization, which requires a temperature of more than 200 °C. Only smectite can form under the present conditions in these fracture zones. The chloritization probably occurred in the past when the fracture zone was deeper than it is now. These observations suggest that among the three fracture zones, that at about 1140 m depth was the most activated at the time of the 1995 Hyogo-ken Nanbu (Kobe) earthquake.  相似文献   

11.
Field investigations reveal spatial variations in fault zone width along strike-slip active faults of the Arima–Takatsuki Tectonic Line (ATTL) and the Rokko–Awaji Fault Zone (RAFZ) of southwest Japan, which together form a left-stepping geometric pattern. The fault zones are composed of damage zones dominated by fractured host rocks, non-foliated and foliated cataclasites, and a fault core zone that consists of cataclastic rocks including fault gouge and fault breccia. The fault damage zones of the ATTL are characterized by subsidiary faults and fractures that are asymmetrically developed on each side of the main fault. The width of the damage zone varies along faults developed within granitic rocks of the ATTL and RAFZ, from ∼50 to ∼1000 m. In contrast, the width of the damage zone within rhyolitic tuff on the northwestern side of the ATTL varies from ∼30 to ∼100 m. The fault core zone is generally concentrated in a narrow zone of ∼0.5–∼5 m in width, consisting mainly of pulverized cataclastic rocks that lack the primary cohesion of the host rocks, including a narrow zone of fault gouge (<0.5 m) and fault-breccia zones either side of the fault. The present results indicate that spatial variations in the width of damage zone and the asymmetric distribution of damage zones across the studied strike-slip faults are mainly caused by local concentrations in compressive stress within an overstep area between left-stepping strike-slip faults of the ATTL and RAFZ. The findings demonstrate that fault zone structures and the spatial distribution in the width of damage zone are strongly affected by the geometric patterns of strike-slip faults.  相似文献   

12.
断裂带通常包括狭窄的断层核与宽阔的破碎带,并对岩石物理及其水力学、流体与渗透性具有重要作用。根据断裂破碎带结构的差异,将碳酸盐岩断层核划分为颗粒支撑、基质支撑与胶结支撑等3种类型,将碳酸盐岩破碎带划分碎裂带与裂缝带。不同类型碳酸盐岩断层核与破碎带形成多种类型组合,并造成断裂破碎带多种复杂的渗流结构。通过井—震资料的结合,可以判识沉积盆地内部较宽的碳酸盐岩断裂破碎带,其宽度—位移关系可以指示断裂破碎带的不同生长方式与机制。复杂内部结构、多期构造成岩作用与non-Andersonian破裂机制可能导致碳酸盐岩断裂破碎带的异常生长,也是碳酸盐岩断裂破碎带机理研究的重要方向。  相似文献   

13.
塔里木盆地走滑带碳酸盐岩断裂相特征及其与油气关系   总被引：2，自引：0，他引：2  
通过露头与井下资料的综合分析,塔里木盆地奥陶系碳酸盐岩走滑断裂带断裂相具有多样性,根据内部构造发育程度可以分为断层核发育、断层核欠发育两类。露头走滑带断层核部以裂缝带、透镜体、滑动面等断裂相发育为特征,断裂边缘的破碎带发育裂缝带、变形带。裂缝带主要分布在断层核附近50m的破碎带内,裂缝多开启,渗流性好。断裂核部透镜体发育,在破碎带也有分布,破碎角砾组合的透镜体多致密。滑动面具有平直截切型、渐变条带型等两种类型,多为开启的半充填活动面。变形带多为方解石与碎裂岩充填,破碎带局部部位裂缝与溶蚀作用较发育。利用地震剖面、构造图、相干图等资料可以判识塔里木盆地内部奥陶系碳酸盐岩走滑断裂相的特征及其发育程度,沿走滑断裂带走向上断裂相具有分段性与差异性,根据渗流性可以定性区分高渗透相、致密相区。沿断裂带高渗透相区是碳酸盐岩缝洞体储层发育的有利部位。断裂相的横向变化造成油气分布的区段性,形成高渗透相输导模式、致密相遮挡模式等两类成藏模式。走滑断裂带碳酸盐岩断裂相的特征及其控藏作用对油气勘探开发储层建模具有重要意义。  相似文献   

14.
Damage surrounding the core of faults is represented by deformation on a range of scales from microfracturing of the rock matrix to macroscopic fracture networks. The spatial distribution and geometric characterization of damage at various scales can help to predict fault growth processes, subsequent mechanics, bulk hydraulic and seismological properties of a fault zone. Within the excellently exposed Atacama fault system, northern Chile, micro- and macroscale fracture densities and orientation surrounding strike-slip faults with well-constrained displacements ranging over nearly 5 orders of magnitude (0.12 m–5000 m) have been analyzed. Faults have been studied that cut granodiorite and have been passively exhumed from 6 to 10 km depth. This allows direct comparison of the damage surrounding faults of different displacements. The faults consist of a fault core and associated damage zone. Macrofractures in the damage zone are predominantly shear fractures orientated at high angles to the faults studied. They have a reasonably well-defined exponential decrease with distance from the fault core. Microfractures are a combination of open, healed, partially healed and fluid inclusion planes (FIPs). FIPs are the earliest set of fractures and show an exponential decrease in fracture density with perpendicular distance from the fault core. Later microfractures do not show a clear relationship of microfracture density with perpendicular distance from the fault core. Damage zone widths defined by the density of FIPs scale with fault displacement but appear to reach a maximum at a few km displacement. One fault, where damage was characterized on both sides of the fault core shows no damage asymmetry. All faults appear to have a critical microfracture density at the fault core/damage zone boundary that is independent of displacement. An empirical relationship for microfracture density distribution with displacement is presented. Preferred FIP orientations have a high angle to the fault close to the fault core and become more diffuse with distance. Models that predict off-fault damage such as a migrating process zone during fault formation, wear from geometrical irregularities and dynamic rupture are all consistent with our data. We conclude it is very difficult to distinguish between them on the basis of field data alone, at least within the limits of this study.  相似文献   

15.
The Hirabayashi borehole (Awaji Island, Japan) was drilled by the Geological Survey of Japan (GSJ) 1 year after the Hyogo-ken Nanbu (Kobe) earthquake (1995, MJMA=7.2). This has enabled scientists to study the complete sequence of deformation across the active Nojima fault, from undeformed granodiorite to the fault core. In the fault core, different types of gouge and fractures have been observed and can be interpreted in terms of a complex history of faulting and fluid circulation. Above the fault core and within the hanging wall, compacted cataclasites and gouge are cut by fractures which show high apparent porosity and are filled by 5–50 μm euhedral and zoned siderite and ankerite crystals. These carbonate-filled fractures have been observed within a 5.5-m-wide zone above the fault, but are especially abundant in the vicinity (1 m) of the fault. The log-normal crystal size distributions of the siderite and ankerite suggest that they originated by decaying-rate nucleation accompanied by surface-controlled growth in a fluid saturated with respect to these carbonates. These carbonate-filled fractures are interpreted as the result of co-seismic hydraulic fracturing and upward circulation of fluids in the hanging wall of the fault, with the fast nucleation of carbonates attributed to a sudden fluid or CO2 partial pressure drop due to fracturing. The fractures cut almost all visible structures at a thin section scale, although in some places, the original idiomorphic shape of carbonates is modified by a pressure-solution mechanism or the carbonate-filled fractures are cut and brecciated by very thin gouge zones; these features are attributed to low and high strain-rate mechanisms, respectively. The composition of the present-day groundwater is at near equilibrium or slightly oversaturated with respect to the siderite, calcite, dolomite and rhodochrosite. Taken together, this suggests that these fractures formed very late in the evolution of the fault zone, and may be induced by co-seismic hydraulic fracturing and circulation of a fluid with a similar composition to the present-day groundwater. They are therefore potentially related to recent earthquake activity (<1.2 Ma) on the Nojima fault.  相似文献   

16.
以野外观察描述为手段,系统研究了碳酸盐岩断裂变形机制的影响因素及断裂带结构演化过程,剖析了碳酸盐岩地层中断裂带结构与流体运移的关系。研究表明,影响碳酸盐岩内断裂变形机制的因素包括岩性、孔隙度、变形深度、温度、胶结作用、先存裂缝等,控制断裂带结构形成的因素包括滑动位移和破裂模式等。低孔隙度碳酸盐岩以裂缝发育为主,高孔隙度碳酸盐岩变形早期产生变形带,带内裂缝联接逐渐发育成断层带。随着埋藏深度的增加,断裂带结构不同：埋藏深度小于3 km,断层核主要发育无内聚力的断层角砾岩和断层泥;埋藏深度大于3 km,断层核普遍发育有内聚力的断层角砾岩和碎裂岩,破碎带发育多种成因的裂缝。随着位移的增加,破裂模式从早期的破裂作用变为后期的碎裂作用,最终形成碎裂流。断裂带演化是一个四维过程,断层核和破碎带发育情况直接影响断层对油气的运移和封闭的作用。断裂变形机制、断裂带内部结构以及与流体运移关系的研究,都可为封闭性提供重要的理论依据。  相似文献   

17.
The role of hydrothermal fluids in assisting the activity of strike-slip faults is investigated using a range of new geological, geophysical, and geochemical data obtained on the Argentat fault, Massif Central, France. This fault zone, 180-km-long and 6 to 8 km-width, has experienced coeval intense channeling of hydrothermal fluids and brittle deformation during a short time span (300–295 Ma). According to seismic data, the fault core is a 4-km-wide, vertical zone of high fracture density that rooted in the middle crust (~ 13 km) and that involved fluids in its deeper parts (9–13 km depth). If stress analyses in the fault core and strain analyses in the damage zone both support a left-lateral movement along the fault zone, it is inferred that hydrothermal fluids have strongly influenced fault development, and the resulting fault has influenced fluid flow. Fluid pressure made easier fracturing and faulting in zones of competent rocks units and along rheological boundaries. Repeated cycles of increase of fault-fracture permeability then overpressure of hydrothermal fluids at fault extremity favored strong and fast development of the crustal-scale strike-slip fault. The high permeability obtained along the fault zone permitted a decrease of coupling across the weak fault core. Connections between shallower and lower crustal fluids reservoirs precipitate the decrease of fault activity by quartz precipitation and sulfides deposition. The zones of intense hydrothermal alteration at shallows crustal levels and the zones of fluid overpressure at the base of the upper crust both controlled the final geometry of the crustal-scale fault zone.  相似文献   

18.
Fission-track (FT) analysis using apatite and zircon was performed on samples from two fracture zones (FZ) at the depths of 1140 and 1310 m within the 1838 m borehole core penetrating the Ryoke Granitic Rocks in the Nojima Fault at Nojima-Hirabayashi, Awaji Island, Japan, drilled just after the 1995 Hyogo-ken Nanbu earthquake. Clear discordance in apatite and zircon FT age was found for two samples located at  2 m below the central part of each FZs where the presence of pseudotachylyte and/or fault gouge would predict the largest amount of slip. Asymmetric distribution was identified by discordant ages with respect to the central part of FZs. These very local discordant ages in the fault reflect thermal anomalies caused by secondary heating with an inferred maximum temperature in the region between apatite and zircon closure temperatures at a time post-48 Ma. As a source of the secondary heating, heat transfer or dispersion via geothermal fluids caused presumably the observed similarity in asymmetric distribution of discordant FT ages at two different FZs. Other samples yield concordant FT zircon and apatite ages and these indicate rapid cooling within the bounds of two closure temperatures of these minerals at  60 Ma of the Ryoke Granitic Rocks.  相似文献   

19.
The co-seismic deformations produced during the September 27, 2003 Chuya earthquake (Ms = 7.5) that affected the Gorny Altai, Russia, are described and discussed along a 30 km long segment. The co-seismic deformations have manifested themselves both in unconsolidated sediments as R- and R′-shears, extension fractures and contraction structures, and in bedrock as the reactivation of preexisting schistosity zones and individual fractures, as well as development of new ruptures and coarse crushing zones. It has been established that the pattern of earthquake ruptures represents a typical fault zone trending NW–SE with a width reaching 4–5 km and a dextral strike–slip kinematics. The initial stress field that produced the whole structural pattern of co-seismic deformations during the Chuya earthquake, is associated with a transcurrent regime with a NNW–SSE, almost N–S, trending of compressional stress axis (σ1), and a ENE–WSW, almost E–W, trending of tensional stress axis (σ3). The state of stress in the newly-formed fault zone is relatively uniform. The local stress variations are expressed in insignificant deviation of σ1 from N–S to NW–SE or NE–SW, in short-term fluctuations of relative stress values in keeping their spatial orientations, or in a local increase of the plunge angle of the σ1. The geometry of the fault zone associated with the Chuya earthquake has been compared with the mechanical model of fracturing in large continental fault zones with dextral strike–slip kinematics. It is apparent that the observed fracture pattern corresponds to the late disjunctive stage of faulting when the master fault is not fully developed but its segments are already clearly defined. It has been shown that fracturing in widely different rocks follows the common laws of the deformation of solid bodies, even close to the Earth surface, and with high rates of movements.  相似文献   

20.
This paper reviews the data concerning the fracture network and the hydraulic characteristics of faults in an active zone of the Gulf of Corinth. Pressure gap measured through fault planes shows that in this area the active normal faults (Aigion, Helike) act, at least temporarily and locally, as transversal seal. The analysis of the carbonate cements in the fractures on both the hangingwall and the footwall of the faults also suggests that they have acted as local seals during the whole fault zone evolution. However, the pressure and the characteristics of the water samples measured in the wells indicate that meteoric water circulates from the highest part of the relief to the coast, which means it goes through the fault zones. Field quantitative analysis and core studies from the AIG-10 well have been performed to define both regional and fault-related fracture networks. Then laboratory thin section observations have been done to recognize the different fault rocks characterizing the fault zone components. These two kinds of approach give information on the permeability characteristics of the fault zone. To synthesize the data, a schematic conceptual 3D fluid flow modeling has been performed taking into account fault zone permeability architecture, sedimentation, fluid flow, fault vertical offset and meteoric water influx, as well as compaction water flow. This modeling allows us to fit all the data with a model where the fault segments act as a seal whereas the relays between these segments allow for the regional flow from the Peloponnese topographic highs to the coast.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号