共查询到16条相似文献，搜索用时 195 毫秒
1.
对摩擦摆基础隔震结构进行了地震反应分析,研究了支座滑道半径对支座位移、楼层加速度和楼层剪力的影响,表明当支座的摩擦系数较小时,随着支座滑道半径的增大,隔震结构的自振周期增大,摩擦摆支座位移逐渐增大,结构的加速度反应和楼层剪力减小当支座的摩擦系数较大时,改变支座的滑道半径,调整基础隔震结构周期对支座位移、结构加速度反应和... 相似文献
2.
3.
4.
抗拔型三重摩擦摆隔震支座是一种新型隔震支座。以框架结构为例,利用ANSYS软件建立了6层和10层普通抗震结构和带该支座的基础隔震结构模型;通过模态分析,得到了结构的自振周期;通过地震响应分析,提取了6层框架隔震层和顶层的位移、加速度和剪力时程曲线,并提取了不同层数不同结构类型的各层间位移、加速度幅值。结果表明：与抗震结构相比,基础隔震结构周期显著增大;隔震结构的变形主要集中在隔震层,隔震层以上的结构基本为整体平动,结构的地震位移反应得到了有效的减小;采用抗拔型三重摩擦摆隔震支座能降低结构地震加速度反应;设置抗拔型三重摩擦摆隔震支座的多层数隔震结构的能量衰减不如低层数的隔震结构迅速。 相似文献
5.
6.
通过模型振动台试验和数值仿真,对适用于高层建筑结构的大吨位摩擦摆隔震支座在不同地震荷载工况下的动力响应和隔震性能进行了深入研究,试验模型的力学及承载性能在不同地震动水准下保持较好,且随着输入激励的增大,支座耗能能力逐渐提高,减隔震效果逐渐增强。隔震支座的数值模拟结果和振动台试验结果吻合良好,取得了较好的模拟效果。在此基础上,选取一复杂高层建筑结构作为研究对象,进行了不同地震波小震和大震激励作用下的动力响应分析,通过对比设置隔震支座与未设置隔震支座的计算结果,总结了高层建筑结构的动力响应规律。结果表明:(1)摩擦摆隔震支座耗能能力随着地震作用的增大而增强;(2)不同类型地震波作用对复杂高层建筑结构的响应明显不同:长周期地震波作用下结构响应明显比普通地震波作用下的结果大,且长周期地震波对结构位移响应的影响较加速度明显;(3)摩擦摆隔震支座对复杂高层建筑结构的地震反应有较为理想的隔震效果,不同地震波作用下结构响应的隔震效果有所不同,且不同响应之间的隔震效果也不相同,位移响应的隔震效果明显大于加速度的隔震效果。 相似文献
7.
近断层地震动中长周期、短持时和高能量的加速度脉冲将对高层摩擦摆基础隔震结构的减震性能产生不利影响,考虑土-结构相互作用（SSI效应）后的隔震结构将产生动力耦合效应,可能进一步放大隔震结构地震响应。为此,通过一幢框架-核心筒高层摩擦摆基础隔震结构的非线性地震响应分析,考察近断层脉冲型地震动作用下框架-核心筒摩擦摆基础隔震结构的层间位移角、楼层加速度和隔震层变形等响应规律,揭示隔震体系的损伤机理。基于集总参数SR （sway-rocking）模型,分析不同场地类别与不同地震动类型对隔震体系动力响应影响规律。结果表明:高层摩擦摆基础隔震结构在近断层脉冲型地震动作用下的减震效果相比普通地震动减震效果变差,楼层剪力、层间位移角和隔震层变形等超越普通地震动作用下的1.5倍;对于Ⅲ和Ⅳ类场地类别,考虑SSI效应使隔震结构的地震响应进一步放大,弹塑性层间位移角随着土质变软增大尤为明显。 相似文献
8.
摩擦摆基础隔震上部偏心结构地震反应影响因素分析 总被引：1，自引：0，他引：1
对上部结构存在偏心的摩擦摆基础隔震结构进行了水平双向地震作用下的地震反应分析,研究了上部结构偏心距和抗扭刚度对结构地震反应的影响。分析表明:上部结构偏心距对上部结构和隔震层的位移反应和加速度反应均有较大影响,即使在上部结构偏心距较小时,其对结构地震反应仍有一定程度的影响;上部结构的抗扭刚度对上部结构的加速度反应影响较小,而对上部结构的位移反应影响较大;上部结构的抗扭刚度对隔震层的加速度反应和位移反应影响较小。因而,对于上部结构存在偏心的摩擦摆基础隔震结构,应减小上部结构偏心距并增大其抗扭刚度以减小摩擦摆基础隔震结构的扭转反应。 相似文献
9.
《地震工程与工程振动》2016,(2)
滑动摩擦隔震支座具有良好的耗能能力、较大水平位移能力和较好的耐久性能,为桥梁减隔震设计提供了一种新方法。本文针对分别安装有单球面摩擦摆支座、双凹面摩擦摆支座、多球面滑动摩擦支座的3种隔震桥梁模型开展了振动台试验研究。通过观察和量测模型桥梁位移、加速度等反应,得出采用3种滑动摩擦支座的隔震桥梁反应特性和隔震效果。由此可知,滑动摩擦隔震支座能有效减小地震对桥梁上部结构的影响,滑动摩擦隔震支座的自振周期与桥梁上部结构无关,只与支座摩擦系数和等效曲率半径相关。 相似文献
10.
为充分了解板式橡胶支座对斜交连续梁桥地震反应的影响,利用OpenSees软件建立简化的斜交桥计算模型进行时程分析,研究板式橡胶支座摩擦滑移效应,以及支座动摩擦系数、剪切刚度、局部脱空等参数对斜交桥地震反应的影响。结果表明:板式橡胶支座考虑摩擦滑移后,不仅桥面位移和转角显著增大,而且出现残余位移和残余转角;随着支座剪切刚度的增大,桥面位移和转角均明显减小;随着桥墩处支座动摩擦系数的增大,桥面位移、转角均呈增长趋势,然而桥台处支座动摩擦系数的影响与之相反;桥墩处局部支座脱空对斜交桥的影响明显大于桥台支座。 相似文献
11.
The force–displacement behavior of the Friction Pendulum? (FP) bearing is a function of the coefficient of sliding friction, axial load on the bearing and effective radius of the sliding surface. The coefficient of friction varies during the course of an earthquake with sliding velocity, axial pressure and temperature at the sliding surface. The velocity and axial pressure on the bearing depend on the response of the superstructure to the earthquake shaking. The temperature at an instant in time during earthquake shaking is a function of the histories of the coefficient of friction, sliding velocity and axial pressure, and the travel path of the slider on the sliding surface. A unified framework accommodating the complex interdependence of the coefficient of friction, sliding velocity, axial pressure and temperature is presented for implementation in nonlinear response‐history analysis. Expressions to define the relationship between the coefficient of friction and sliding velocity, axial pressure, and temperature are proposed, based on available experimental data. Response‐history analyses are performed on FP bearings with a range of geometrical and liner mechanical properties and static axial pressure. Friction is described using five different models that consider the dependence of the coefficient of friction on axial pressure, sliding velocity and temperature. Frictional heating is the most important factor that influences the maximum displacement of the isolation system and floor spectral demands if the static axial pressure is high. Isolation system displacements are not significantly affected by considerations of the influence of axial pressure and velocity on the coefficient of friction. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
12.
针对西昌市某高层钢筋混凝土剪力墙结构进行了橡胶支座隔震设计和抗震性能分析。西昌市抗震设防烈度为9度,历史上曾发生过7.5级地震。该工程场址地质构造较复杂,东侧区域有一条隐伏断层,属则木河断裂带次生断层。则木河断裂带是川西主要发震断裂带之一,至今仍是一条活动较强烈的大断裂。按照《建筑抗震设计规范》(2016版)要求,取近场影响系数1.5,以提高结构的安全度;选取Ⅱ类场地5条天然地震波和2条人工模拟地震波,共计七条符合规范要求的地震波;基于SAP2000软件对结构进行了隔震设计,中震作用下结构层间剪力和倾覆弯矩减震系数最大值为0.24,比非隔震结构地震响应减小显著,罕遇地震下隔震支座的面压、水平位移能够满足规范要求。采用ABAQUS对结构进行了罕遇地震动力弹塑性时程分析,结果表明结构能够满足"大震不倒"的抗震设防目标。 相似文献
13.
针对曲线桥梁在地震中因固定支座处及桥墩底部受力过大而破坏严重的现象,提出考虑支座摩擦滑移隔震的曲线桥梁抗震设计方法,通过大型振动台模型试验,研究曲线桥梁考虑支座摩擦滑移时的隔震机理。试验结果表明:支座摩擦滑移可有效减小地震作用下曲线桥梁的桥墩加速度响应,但同时会增加桥墩与梁体间的相对位移;曲线桥梁进行隔震设计后,桥墩的应变响应明显减小,证明该设计方法可有效避免地震作用下桥墩底部产生较大的损伤;最后,探讨了考虑支座摩擦滑移时曲线桥梁的隔震机理并与震害进行了对比验证。研究成果可为曲线桥梁的减震隔设计提供新的视角。 相似文献
14.
The seismic performance of a self-centering precast reinforced concrete (RC) frame with shear walls was investigated in this paper. The lateral force resistance was provided by self-centering precast RC shear walls (SPCW), which utilize a combination of unbonded prestressed post-tensioned (PT) tendons and mild steel reinforcing bars for flexural resistance across base joints. The structures concentrated deformations at the bottom joints and the unbonded PT tendons provided the self-centering restoring force. A 1/3-scale model of a five-story self-centering RC frame with shear walls was designed and tested on a shake-table under a series of bi-directional earthquake excitations with increasing intensity. The acceleration response, roof displacement, inter-story drifts, residual drifts, shear force ratios, hysteresis curves, and local behaviour of the test specimen were analysed and evaluated. The results demonstrated that seismic performance of the test specimen was satisfactory in the plane of the shear wall; however, the structure sustained inter-story drift levels up to 2.45%. Negligible residual drifts were recorded after all applied earthquake excitations. Based on the shake-table test results, it is feasible to apply and popularize a self-centering precast RC frame with shear walls as a structural system in seismic regions. 相似文献
15.
针对非规则人字形桥梁在地震作用下灾变严重的问题,以一座非规则人字形桥梁为研究对象,建立其空间分析模型,研究综合考虑支座摩擦滑移、结构碰撞对非规则人字形桥梁地震响应的影响。结果表明:邻梁间的碰撞作用可使得桥梁墩顶位移及内力相比不考虑时有所减小,但同时也使梁体产生了较大的加速度脉冲效应;当考虑支座摩擦滑移和结构碰撞时,固定墩墩顶位移和邻梁相对位移峰值有一定程度增大,然而对梁体加速度脉冲效应结果影响并无统一规律;纵向地震波作用下,非规则人字形桥梁不仅存在顺桥向的碰撞,横桥向的碰撞响应也不容忽视。非规则人字形桥梁进行抗震设计计算时应选取符合实际情况的计算模型,考虑支座摩擦滑移及结构间的碰撞。 相似文献
16.
Cheung Pakchiu 《地震工程与工程振动(英文版)》2012,11(2):173-183
During past strong earthquakes, highway bridges have sustained severe damage or even collapse due to excessive displacements and/or very large lateral forces. For commonly used isolation bearings with a pure friction sliding surface, seismic forces may be reduced but displacements are often unconstrained. In this paper, an alternative seismic bearing system, called the cable-sliding friction bearing system, is developed by integrating seismic isolation devices with displacement restrainers consisting of cables attached to the upper and lower plates of the bearing. Restoring forces are provided to limit the displacements of the sliding component. Design parameters including the length and stiffness of the cables, friction coefficient, strength of the shear bolt in a fixed-type bearing, and movements under earthquake excitations are discussed. Laboratory testing of a prototype bearing subjected to vertical loads and quasi-static cyclic lateral loads, and corresponding numerical finite element simulation analysis, were carried out. It is shown that the numerical simulation shows good agreement with the experimental force-displacement hysteretic response, indicating the viability of the new bearing system. In addition, practical application of this bearing system to a multi-span bridge in China and its design advantages are discussed. 相似文献