首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 467 毫秒
1.
用负热电离质谱法对自行研制生产的97Tc稀释剂同位素组成进行分析测定,并采用同位素稀释质谱法对其浓度进行标定,选用等概率模型对同位素比值测定结果进行校正,组成分析扩展不确定度为1.3%(K=2),浓度标定扩展不确定度为2.07%(K=2)。  相似文献   

2.
Aqueous solutions of increasing pH (7.0, 10.6 and 12.6) were used to extract exhaustively the organic matter (OM) from a pelo-stagnogley (heavy clay) soil in long term cultivation. OM yield was 1.7 times greater when the extracts were processed using an XAD-8 and XAD-4 resin-in-tandem procedure than that from the procedure of the International Humic Substances Society (IHSS). The substantial difference can be attributed to the amount retained by the XAD-4 resin, which is lost in the IHSS process. Elemental, δ13C, δ15N, cation exchange capacity, neutral sugars, amino acids and solid state CPMAS 13C NMR analyses indicated significant, but rational similarities and differences between the various fractions isolated. There was strong NMR evidence for material derived from lignin in all the humic and fulvic acid isolates. The signals were attenuated in the more transformed/oxidized fractions isolated at lower pH. Novel humic acid fractions enriched in carbohydrate/peptide functionalities were isolated from the more hydrophobic extracts at pH 10.6 and 12.6. Isolates from XAD-4, of microbial origin, were enriched in neutral sugars but not in amino acids, and had minimal aromaticity. Components isolated from the cultivated soil were broadly similar to those from a comparable soil in long term grassland. The compositions of fractions isolated from the drainage water were similar to those extracted from the soil but had higher carboxyl content. The amount and composition of the various organic fractions in grassland and the continuously cropped soil are discussed in terms of their potential to contribute to carbon sequestration by soil under similar management regimes.  相似文献   

3.
In this study we determined rubidium isotope ratios in twenty-one commonly used international geological reference materials, including igneous, sedimentary and metamorphic rocks, as well as an IAPSO seawater reference material. All δ87Rb results were obtained relative to the NIST SRM 984 reference material. For most reference materials, Rb was purified using a single column loaded with Sr-spec resin. For reference materials containing low Rb but high mass fractions of matrix elements (such as basic rock and seawater), Rb was purified using two-column chromatography, with the first column packed with AGMP-50 resin and the second column packed with Sr-spec resin. Two methods for instrumental mass bias correction, sample-standard bracketing (SSB) mode, and the combined sample-standard bracketing and Zr internal normalisation (C-SSBIN) method, were compared for Rb isotopic measurements by multi-collector inductively coupled plasma-mass spectrometry (MC-ICP-MS). The long-term reproducibility of Rb isotopic measurements using both methods was similar, better than 0.06‰ (2s, standard deviation) for NIST SRM 984. Significant Rb isotopic fractionation was observed among the reference materials, with an overall variation in δ87Rb values of approximately 0.5‰. The δ87Rb values of igneous rocks ranged from -0.28‰ to +0.06‰, showing a trend from heavier isotopic compositions in mafic rocks to lighter δ87Rb values in the more evolved felsic rocks. The sedimentary and metamorphic rocks had Rb isotope ratios similar to those of igneous rocks. The δ87Rb values of the reference materials related to low-temperature geological processes showed a wider range than those of high-temperature processes. Notably, the IAPSO seawater reference material had a δ87Rb value of +0.14‰, which deviated from that of igneous rocks, and represents the heaviest reservoir of Rb isotopes found thus far on Earth. The comprehensive dataset presented here has the potential to serve for quality assurance purposes, and provide a framework for interlaboratory comparisons of Rb isotope ratios.  相似文献   

4.
Calcium isotopic compositions of sixteen Ca‐bearing USGS geological reference materials including igneous and sedimentary rocks are reported. Calcium isotopic compositions were determined in two laboratories (GPMR, State Key Laboratory of Geological Processes and Mineral Resources, China University of Geosciences, Wuhan; and CIG, Centre for Isotope Geochemistry, University of California, Berkeley) using the 42Ca‐48Ca double‐spike technique by thermal ionisation mass spectrometry. As opposed to common cation exchange resin, a micro‐column filled with Ca‐selective resin (DGA resin) was used in order to achieve high recovery (> 96%) and efficient separation of Ca from the sample matrix. The intermediate measurement precision was evaluated at 0.14‰ (2s) for δ44/40CaSRM915a at GPMR, based on replicate measurements of pure Ca reference material NIST SRM 915a, NIST SRM 915b and seawater. Overall, the measurement uncertainties in both laboratories were better than 0.15‰ at the 2s level. Result validation was carried out for all available data sets. The Ca isotopic compositions of USGS reference materials are not only in agreement between GPMR and CIG, but also in agreement with previously published data within quoted uncertainties. The comprehensive data set reported in this study serves as a reference for both quality assurance and interlaboratory comparison of high precision Ca isotopic study.  相似文献   

5.
应用多接收器电感耦合等离子体质谱仪(MC-ICP-MS)测定地质样品中锶、钕同位素组成时,化学前处理流程冗长、复杂,且容易出现样品未完全溶解的现象。本文采用微波消解法消解样品,在保证消解效果的前提下有效地缩短了溶样时间,在此基础上研究了锶、钕化学分离和质谱测试流程,重点考察了树脂柱的回收率和记忆效应。结果表明:树脂经10次使用后的锶、钕流程空白均低于1.0 ng,但回收率明显下降,分别由原来的98%和90%降到20%和50%,若待测样品中锶、钕含量较低,所接收的锶、钕则达不到质谱仪测试范围,因此建议锶特效树脂使用次数不超过5次,AG50W-X8稀土柱和Ln树脂使用次数不超过10次。整套流程应用于国际地质标准样品(BCR-2、W-2a、BHVO-2、AGV-2)的锶、钕分离,MC-ICP-MS所得的87Sr/86Sr、143Nd/144Nd测定值与文献报道值一致,仪器的内精度2SE(n=50)和方法的外精度2SD(n=6)均优于0.0015%,表明该流程可以满足地质样品中锶、钕同位素高精度测定的要求。  相似文献   

6.
A novel preconcentration method is presented for the determination of Mo isotope ratios by multi‐collector inductively coupled plasma‐mass spectrometry (MC‐ICP‐MS) in geological samples. The method is based on the separation of Mo by extraction chromatography using N‐benzoyl‐N‐phenylhydroxylamine (BPHA) supported on a microporous acrylic ester polymeric resin (Amberlite CG‐71). By optimising the procedure, Mo could be simply and effectively separated from virtually all matrix elements with a single pass through a small volume of BPHA resin (0.5 ml). This technique for separation and enrichment of Mo is characterised by high selectivity, column efficiency and recovery (~ 100%), and low total procedural blank (~ 0.18 ng). A 100Mo‐97Mo double spike was mixed with samples before digestion and column separation, which enabled natural mass‐dependent isotopic fractionation to be determined with a measurement reproducibility of  < 0.09‰ (δ98/95Mo, 2s) by MC‐ICP‐MS. The mean δ98/95MoSRM 3134 (NIST SRM 3134 Mo reference material; Lot No. 891307) composition of the IAPSO seawater reference material measured in this study was 2.00 ± 0.03‰ (2s, n = 3), which is consistent with previously published values. The described procedure facilitated efficient and rapid Mo isotopic determination in various types of geological samples.  相似文献   

7.
The purpose of the study was to evaluate the influence of polyvalent cations known to form complexes with natural organic substances on the operational fractionation of dissolved organic matter (DOM) using XAD-8 adsorber resin. Dissolved organic matter solutions from a forest floor were treated with increasing concentrations of polyvalent metal cations (Ca2+, Al3+, Fe3+) at different pH levels. Then the concentrations of total dissolved organic carbon (DOC) and the distribution between hydrophilic and hydrophobic DOC were determined. The concentrations of total DOC decreased slightly when the C/metal ratio was less than 10, especially for Al and Fe. Hydrophilic DOC increased and hydrophobic DOC decreased with increasing concentrations of metal cations. Effects increased in the order Ca<Al<Fe and were more pronounced at low DOC concentrations and high pH values. The reason for the reduction of the DOC concentrations seemed to be the formation of insoluble metal–DOM complexes, while soluble metal–DOM complexes may induce an alteration of the distribution between hydrophilic and hydrophobic DOC. Thus, the polyvalent cations and their concentration need to be considered when DOM fraction distributions, determined with XAD-8 resin, of different waters are compared, especially at low DOC contents and high pH.  相似文献   

8.
The recommended concentrations of 239Pu, 240Pu and 239+240Pu in reference material IAEA‐315 (marine sediment) were estimated by three analytical methods: isotope dilution thermal ionisation mass spectrometry (TIMS), isotope dilution inductively coupled plasma‐mass spectrometry (ICP‐MS) and alpha spectrometry. The determination of 239Pu and 240Pu (239+240Pu by alpha spectrometry) was carried out with samples from randomly selected bottles using each method. Plutonium‐238 was also measured by alpha spectrometry. A plutonium‐242 reference material was used as a spike for the quantitative analysis. The influence of 242Pu in the samples was therefore calculated; however, this contribution was less than the range of uncertainty and did not influence the final results. The obtained data were statistically analysed using variance component analysis and paired comparison. The combined standard uncertainties from “method/measurement”, “bottle” and “sub‐sample” were in the order of 3 to 6%. The main contributions to the uncertainty were from the material heterogeneity and from systematic differences between methods. Based on this study with twenty‐seven analyses using 10–14 g sample mass, concentrations of (38 ± 3) Bq kg?1, (28 ± 3) Bq kg?1 and (66 ± 4) Bq kg?1 are proposed as recommended values for 239Pu, 240Pu and 239+240Pu, respectively, and (9.5 ± 0.4) Bq kg?1 for 238Pu as an information value in reference material IAEA‐315. In mass concentration units, these amount to (16.4 ± 1.2) ng kg?1, (3.3 ± 0.4) ng kg?1 and (0.015 ± 0.003) ng kg?1 for 239Pu, 240Pu and 238Pu, respectively. The certified reference materials NIST 4350B and NIST 4354 were also analysed by TIMS for quality assurance of the method used in this study.  相似文献   

9.
A passive sampling system for use with rhodamine WT (RWT) in groundwater tracing experiments was developed to assist in the characterisation of groundwater flow paths. Amberlite XAD-7 resin was found to be suitable for adsorption of RWT, which can then be extracted using an ethanol/water mix and analysed fluorometrically. Batch and column experiments showed that XAD-7 resin has a high RWT capacity. The adsorption was slightly dependent on pH, but was always above 75% under batch conditions. The resin had a high percentage mass recovery at flow velocities around 1.5 m/day, but this decreased with increasing flow velocities. Desorption of RWT off the resin in water is dependent on the flow velocity of water and the time after the peak RWT has passed. The mass of RWT extracted from the resin bags correlated very well with both the RWT mass flux in the water and the peak concentrations observed in the monitoring wells in a field experiment. The results of resin bags were reproducible in the field with a mean coefficient of variation equal to 16%. This method has been successfully applied to two field situations with different flow velocities to indicate groundwater flow paths. Electronic Publication  相似文献   

10.
彭子成 《第四纪研究》1997,17(3):258-264
近10年来国际上用热电离质谱代替α谱仪测定不平衡铀系样品的年龄,在造礁珊瑚、洞穴堆积物、年轻火山岩和湖泊沉积物等领域已取得了显著的成果。该技术有明显的优点,如样品用量少,测试时间短,测量精度高,测年范围宽,是中更新世至全新世以来有效的测年方法之一,可为全球变化研究提供高精度和高灵敏度的年龄谱,展示了热电离质谱技术如同加速器质谱技术一样,有广阔的应用前景。我们曾用MAT-262质谱仪对国内石笋标样(GBW04412,GBW04413)和国际珊瑚标样(RKM-4)进行过测试,取得了与标准值一致的结果。  相似文献   

11.
Charred organic remains are ubiquitous in the archaeological and fossil record and are often used to interpret past environments and climate. This study focuses on the physical and chemical alteration that takes place during heating (i.e. charring). Modifications to the internal and external morphology were noted alongside the change in molecular and stable carbon isotope signature. Molecular analyses were undertaken using direct temperature resolved mass spectrometry and the stable carbon isotopes determined using isotope ratio mass spectrometry. The results of this study document a general enrichment in 13C/12C composition of charred material which could reflect the changes observed in both the molecular composition and the relative proportions of the molecules formed. These results indicate that spurious results might be inferred when comparing the stable carbon isotope signature of charred/charcoalified material with uncharred organic matter  相似文献   

12.
海洋有孔虫的硼同位素能够反映海水酸碱度值的变化,为研究大气CO2浓度在长时间尺度上的变化提供了一种新的手段,甚至可能超出冰芯所能企及的范围。天然样品中硼同位素的测定方法最为常用的是热电离质谱法,分为正热电离质谱法与负热电离质谱法。目前海洋有孔虫硼同位素分析主要应用负热电离质谱法,该方法最大的优点是所需要的样品量比较小(<1ng B),实验精度却相对比较高(0.6‰~2.0‰;  2sd.)。近年来,基于常规负热电离质谱法发展的全蒸发负热电离质谱法通过分析完所有样品而有效降低分析过程中所发生的分馏效应所带来的影响,并使样品的信号最大化,该方法精度能够达到0.7‰(2s.d.)。本文详细介绍了常规负热电离质谱法和全蒸发负热电离质谱法的各个分析步骤,包括样品前处理、涂样、质谱分析、同质异位素干扰以及实验分析精度等方面。随着实验分析技术的进展,海洋有孔虫硼同位素已被用来重建长时间尺度(百万年和千万年)和短时间尺度(冰期-间冰期)的大气CO2浓度变化。现有的研究证实利用海洋浮游有孔虫硼同位素重建的大气CO2浓度变化与Vostok冰芯记录的大气CO2浓度变化吻合地很好。  相似文献   

13.
固相吸附-液相色谱-质谱法测定饮用水中痕量有机污染物   总被引:1,自引:0,他引:1  
通过对自来水中有机污染物的检测,初步了解和评价了某市自来水中有机物污染状况.采用XAD-2树脂对水中有机物进行富集、液相色谱-质谱联用(LC-MS)法测定部分有机污染物.结果表明,自来水厂出厂水中检出有机污染物含量均未超过国家饮用水水质标准,但UPVC型水管中水头水有机物含量略微高于铸铁型水管,中断水中有机物含量基本相同.  相似文献   

14.
Chromium (Cr) isotopes have been widely used in various fields of Earth and planetary sciences. However, high‐precision measurements of Cr stable isotope ratios are still challenged by difficulties in purifying Cr and organic matter interference from resin using double‐spike thermal ionisation mass spectrometry. In this study, an improved and easily operated two‐column chemical separation procedure using AG50W‐X12 (200–400 mesh) resin is introduced. This resin has a higher cross‐linking density than AG50W‐X8, and this higher density generates better separation efficiency and higher saturation. Organic matter from the resin is a common cause of inhibition of the emission of Cr during analysis by TIMS. Here, perchloric and nitric acids were utilised to eliminate organic matter interference. The Cr isotope ratios of samples with lower Cr contents could be measured precisely by TIMS. The long‐term intermediate measurement precision of δ53/52CrNIST SRM 979 for BHVO‐2 is better than ± 0.031‰ (2s) over one year. Replicated digestions and measurements of geological reference materials (OKUM, MUH‐1, JP‐1, BHVO‐1, BHVO‐2, AGV‐2 and GSP‐2) yield δ53/52CrNIST SRM 979 results ranging from ?0.129‰ to ?0.032‰. The Cr isotope ratios of geological reference materials are consistent with the δ53/52CrNIST SRM 979 values reported by previous studies, and the measurement uncertainty (± 0.031‰, 2s) is significantly improved.  相似文献   

15.
本文初步建立了一种用硼特效树脂和阴、阳混和离子交换树脂相结合进行有孔虫中硼的分离和同位素测定的方法。该方法适用低硼含量 (纳克级 )的微体古生物中的硼的分离和同位素测定 ,分离过程不产生同位素分馏 ,满足了正热电离质谱法测定硼同位素的要求。  相似文献   

16.
硼硅玻璃是目前压水堆应用最多的可燃毒物材料,产品中硼同位素组成的准确测定对燃耗预估及产品质量判定具有重要意义。文章基于直接熔融热电离质谱法,首先探讨了硅元素对硼酸中硼同位素测量结果的影响,结果表明:Si/B质量比小于9时,硅对NIST 951a硼酸标准物质测量结果无显著干扰,采用直接熔融热电离质谱法测定核电用硼硅玻璃中硼同位素比值具有可行性;随后,详细分析了Na/B摩尔比、甘露醇和石墨加入量3个参数对测试结果的影响,得到的最佳参数为Na/B摩尔比9、加入甘露醇及3μL石墨发射剂;最后,采用优化测试参数,对实际硼硅玻璃样品进行了测试,并以NIST 951a硼酸标准物质为外标对测量结果进行分馏校正,结果发现分馏校正后样品的不确定度来源主要是标准物质。研究成果可满足硼硅玻璃的燃耗预估及产品质量的快速判定需要。  相似文献   

17.
We report the isotopic composition of molybdenum in twenty-three presolar SiC grains from the Murchison meteorite which have been measured by resonant ionization mass spectrometry (RIMS). Relative to terrestrial abundance (and normalized to s-process-only 96Mo), the majority of the analyzed grains show strong depletions in the p-process isotopes 92Mo and 94Mo and the r-process isotope 100Mo. Sixteen of these grains have δ-values <−600% for these three isotopes. The observed isotopic patterns of Mo from mainstream SiC grains clearly reveal the signature of s-process nucleosynthesis. Three-isotope plots of all grain data (δiMo vs. δ92Mo) show strong linear correlations with characteristic slopes. This finding suggests mixing of solar-like material and pure s-process material in the parent stars. Comparison with evolutionary calculations of nucleosynthesis and mixing in red giants suggests that low-mass thermally-pulsed symptotic giant branch (TP-AGB) stars are the most likely site for the observed s-process nucleosynthesis.  相似文献   

18.
Aluminium tracer diffusivities were measured in polycrystalline mullite. The artificial aluminium isotope 26Al was used as tracer isotope. An advanced preparation technique for the 26Al2O3 tracer source allowed to apply secondary ion mass spectrometry (SIMS) in order to analyse 26Al depth distributions in the polycrystalline material. Pre-exponential factors and activation enthalpies were determined for compositions of 78 wt.% Al2O3, 22 wt.% SiO2 (high-alumina material) and of 72 wt.% Al2O3, 28 wt.% SiO2 (low-alumina material), respectively. A strong dependence of the 26Al grain boundary diffusivity on the composition is observed. The results are discussed in comparison to previous data on grain boundary diffusivities of oxygen in mullite samples from the same batch. Dedicated to Prof. Hermann Schmalzried on the occasion of his 75th birthday.  相似文献   

19.
Inductively coupled plasma-mass spectrometry (ICP-MS) is capable of measuring isotopic and elemental abundances in geologic materials easily and rapidly. Although the precision of isotope ratio data obtained by ICP-MS is inferior to that by thermal ionization mass spectrometry, it is adequate for application to a number of geochemical exploration problems.National Institute of Standards and Technology (NIST) Pb metal standard reference material 981 (NBS981), was used as the isotopic standard to correct the measured isotope intensities for mass discrimination. The mean relative standard deviation (RSD) of the determinations of the abundances of 206Pb, 207Pb, and 208Pb in the two other NIST Pb isotope reference materials, NBS981 and NBS982, was better than 0.3%, whereas the RSD for the determination of the less abundant 204Pb was 0.4%. Accuracy was demonstrated by repeated analysis of NBS981, NBS982, and NBS983. The Student t-statistic ranged between −1.75 and 2.04 for the abundances of the 4 Pb isotopes in the three NIST materials.Data from a suite of 13 uraninite-rich samples from Labrador demonstrate the ability of ICP-MS to determine age and geochemical information sufficient for regional interpretations. The determined radiogenic 207Pb/206Pb ratios of 12 of the samples give ages between 1697 and 1805 Ma with average uncertainties (one standard deviation) of 4 Ma, whereas one of the samples has an age of 495 ± 4 Ma. The average age of the 12 samples was 1752 ± 27 Ma. Along with the Pb isotope intensities, 232Th and 238U were measured and the U-Pb age determined from a fit of the 206Pb/238U vs. 207Pb/235U for 9 of the samples. The concordia intercept age of 1740 Ma for the best-fit line is in good agreement with the mean 207Pb/206Pb age of 1752 Ma.  相似文献   

20.
Fullerenes have been detected in carbonaceous chondrite meteorites and in breccia samples from meteorite impact craters, but questions have been raised about contradictory results from similar samples and the sensitivities and accuracies of different analytical methods. We analyzed samples from three impact craters and detected C60 in samples from several locations; we also observed differences in the detection capabilities of various analytical techniques used in the search for fullerenes. The presence of C60 in rocks from the Onaping Formation of the Sudbury impact crater was confirmed. Low levels of C60 were also detected for the first time in samples from the Gardnos (Norway) and Ries (Germany) impact structures.We detected C60 in these samples using surface-enhanced laser desorption/ ionization (SELDI), but the related technique of microprobe laser-desorption, laser-ionization mass spectrometry (μL2MS) did not observe C60 above detection limits. We attribute the absence of μL2MS signal to aggregate formation caused by phthalic acid esters, which appear to easily contaminate samples either during storage or demineralization in plastic containers. The μL2MS technique is incapable of detecting aggregated C60, but aggregation does not suppress detection in SELDI. Phthalate-induced aggregation did, however, enhance SELDI detection of C60 in some cases, and we suggest that this enhancement may help explain previously reported differences in C60 detection from natural samples between laser desorption mass spectrometry (LDMS, a technique analogous to SELDI that has detected fullerenes in meteorite and impact breccia samples) and high-pressure liquid chromatography (HPLC). This work highlights the effects of phthalates and other indigenous compounds or contaminants on certain mass spectrometric techniques and lends support to the idea that several complementary analytical methods should be employed to investigate complex natural samples.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号