共查询到20条相似文献，搜索用时 15 毫秒
1.
Zhou Taofa Wu Mingan Fan Yu Duan Chao Yuan Feng Zhang Lejun Liu Jun Qian Bing Franco Pirajno David R. Cooke 《Ore Geology Reviews》2011,43(1):154-169
The Middle-Lower Yangtze (Changjiang) River Valley metallogenic belt is located on the northern margin of the Yangtze Craton of eastern China. Most polymetallic deposits in the Changjiang metallogenic belt are clustered in seven districts where magmatism of Mesozoic age (Yanshanian tectono-thermal event) is particularly extensive. From west to east these districts are: E-dong, Jiu-Rui, Anqing-Guichi, Lu-Zong, Tong-Ling, Ning-Wu and Ning-Zhen. World-class iron ore deposits occur in the Lu-Zong and Ning-Wu ore clusters, which are mainly located in continental fault-bound volcanic-sedimentary basins. One of these deposits is the Longqiao iron deposit, discovered in the northern part of the Lu-Zong Basin in 1985. This deposit consists of a single stratabound and stratiform orebody, hosted in sedimentary carbonate rocks of the Triassic Dongma'anshan Formation. A syenite pluton (Longqiao intrusion) is situated below the deposit. The iron ore is massive and disseminated and the ore minerals are mainly magnetite and minor pyrite. Wall rock alteration mostly consists of skarn minerals, such as diopside, garnet, potassic feldspar, quartz, chlorite, phlogopite and anhydrite. Thin sedimentary siderite beds of Triassic age occur as relict laminated ore at the top and the margin of the magnetite orebody. These sideritic laminae are part of Triassic evaporite-bearing carbonate deposits (Dongma'anshan Formation).Sulfur isotopic compositions show that the sulfur in the deposit was derived from a mixture of magmatic hydrothermal fluids and carbonate–evaporite host rocks. Similarly, the C and O isotopic compositions of limestones from the Dongma'anshan Formation indicate that these rocks interacted with magmatic hydrothermal fluids. The O isotopic compositions of the syenitic rocks and minerals from the deposit show that the hydrothermal magnetite and skarn minerals were formed from magmatic fluids. The Pb isotopic compositions of sulfides are similar to those of the Longqiao syenite. Phlogopite coexisting with magnetite in the magnetite ores yielded a plateau age of 130.5 ± 1.1 Ma (2σ), whereas the LA-ICP MS age of the syenite intrusion is 131.1 ± 1.5 Ma, which is slightly older than the age of phlogopite.The Longqiao syenite intrusion may have crystallized from a parental alkaline magma, generated by partial melting of lithospheric mantle, during extensional tectonics. The ore fluids were probably first derived from magma at depth, later emplaced in the sedimentary rocks of the Dongma'anshan Formation, where it interacted with siderite and evaporite-bearing carbonate strata, resulting in the formation of magnetite and skarn minerals. The Longqiao iron deposit is a skarn-type stratabound and stratiform mineral system, genetically and temporally related to the Longqiao syenite intrusion. The Longqiao syenite is part of the widespread Mesozoic intracontinental magmatism (Yanshanian event) in eastern China, which has been linked to lithospheric delamination and asthenospheric upwelling. 相似文献
2.
Khin Zaw Stephen G. Peters Paul Cromie Clive Burrett Zengqian Hou 《Ore Geology Reviews》2007,31(1-4):3-47
The South China Region is rich in mineral resources and has a wide diversity of deposit types. The region has undergone multiple tectonic and magmatic events and related metallogenic processes throughout the earth history. These tectonic and metallogenic processes were responsible for the formation of the diverse styles of base and precious metal deposits in South China making it one of the resource-rich regions in the world. During the Proterozoic, the South China Craton was characterised by rifting of continental margin before eruption of submarine volcanics and development of platform carbonate rocks, and the formation of VHMS, stratabound copper and MVT deposits. The Phanerozoic metallogeny of South China was related to opening and closing of the Tethyan Ocean involving multiple orogenies by subduction, back-arc rifting, arc–continent collision and post-collisional extension during the Indosinian (Triassic), Yanshanian (Jurassic to Cretaceous) and Himalayan (Tertiary) Orogenies. The Late Palaeozoic was a productive metallogenic period for South China resulting from break-up and rifting of Gondwana. Significant stratabound base and precious metal deposits were formed during the Devonian and Carboniferous (e.g., Fankou and Dabaoshan deposits). These Late Palaeozoic SEDEX-style deposits have been often overprinted by skarn systems associated with Yanshanian magmatism (e.g., Chengmenshan, Dongguashan and Qixiashan). A number of Late Palaeozoic to Early Mesozoic VHMS deposits also developed in the Sanjiang fold belt in the western part of South China (e.g., Laochang and Gacun).South China has significant sedimentary rock-hosted Carlin-like deposits, which occur in the Devonian- to Triassic-aged accretionary wedge or rift basins at the margin of the South China Craton. They are present in a region at the junction of Yunnan, Guizhou, and Guangxi Provinces called the ‘Southern Golden Triangle’, and are also present in NW Sichuan, Gansu and Shaanxi, in an area known as the ‘Northern Golden Triangle’ of China. These deposits are mostly epigenetic hydrothermal micron-disseminated gold deposits with associated As, Hg, Sb + Tl mineralisation similar to Carlin-type deposits in USA. The important deposits in the Southern Golden Triangle are Jinfeng (Lannigou), Zimudang, Getang, Yata and Banqi in Guizhou Province, and the Jinya and Gaolong deposits in Guangxi District. The most important deposits in the Northern Golden Triangle are the Dongbeizhai and Qiaoqiaoshang deposits.Many porphyry-related polymetallic copper–lead–zinc and gold skarn deposits occur in South China. These deposits are related to Indosinian (Triassic) and Yanshanian (Jurassic to Cretaceous) magmatism associated with collision of the South China and North China Cratons and westward subduction of the Palaeo-Pacific Plate. Most of these deposits are distributed along the Lower to Middle Yangtze River metallogenic belt. The most significant deposits are Tonglushan, Jilongshan, Fengshandong, Shitouzui and Jiguanzui. Au–(Ag–Mo)-rich porphyry-related Cu–Fe skarn deposits are also present (Chengmenshan and Wushan in Jiangxi Province and Xinqiao, Mashan-Tianmashan, Shizishan and Huangshilaoshan in Anhui Province). The South China fold belt extending from Fujian to Zhejiang Provinces is characterised by well-developed Yanshanian intrusive to subvolcanic rocks associated with porphyry to epithermal type mineralisation and mesothermal vein deposits. The largest porphyry copper deposit in China, Dexing, occurs in Jiangxi Province and is hosted by Yanshanian granodiorite. The high-sulphidation epithermal system occurs at the Zijinshan district in Fujian Province and epithermal to mesothermal vein-type deposits are also found in the Zhejiang Province (e.g., Zhilingtou). Part of Shandong Province is located at the northern margin of the South China Craton and the province has unique world class granite-hosted orogenic gold deposits. Occurrences of Pt–Pd–Ni–Cu–Co are found in Permian-aged Emeishan continental flood basalt (ECFB) in South China (Jinbaoshan and Baimazhai in Yunnan Province and Yangliuping in Sichuan Province). South China also has major vein-type tungsten–tin–bismuth–beryllium–sulphide and REE deposits associated with Yanshanian magmatism (e.g., Shizhuyuan and Xihuashan), important world class stratabound base metal–tin deposits (Dachang deposit), and the large antimony deposits (Xikuangshan and Woxi). During the Himalayan Orogeny, many giant deposits were formed in South China including the recently emerging Yulong and Gangdese porphyry copper belts in Tibet and the Ailaoshan orogenic gold deposits in Yunnan. 相似文献
3.
4.
Jingwen Mao Yitian Wang Bernd Lehmann Jinjie Yu Andao Du Yanxiong Mei Yongfeng Li Wenshuan Zang Holly J. Stein Taofa Zhou 《Ore Geology Reviews》2006,29(3-4):307-324
The area of the Middle–Lower Yangtze River valley, Eastern China, extending from Wuhan (Hubei province) to western Zhenjiang (Jiangsu province), hosts an important belt of Cu–Au–Mo and Fe deposits. There are two styles of mineralization, i.e., skarn/porphyry/stratabound Cu–Au–Mo–(Fe) deposits and magnetite porphyry deposits in several NNE-trending Cretaceous fault-bound volcanic basins. The origin of both deposit systems is much debated. We dated 11 molybdenite samples from five skarn/porphyry Cu–Au–Mo deposits and 5 molybdenite samples from the Datuanshan stratabound Cu–Au–Mo deposit by ICP-MS Re–Os isotope analysis. Nine samples from the same set were additionally analyzed by NTIMS on Re–Os. Results from the two methods are almost identical. The Re–Os model ages of 16 molybdenite samples range from 134.7 ± 2.3 to 143.7 ± 1.6 Ma (2σ). The model ages of the five samples from the Datuanshan stratabound deposit vary from 138.0 ± 3.2 to 140.8 ± 2.0 Ma, with a mean of 139.3 ± 2.6 Ma; their isochron age is 139.1 ± 2.7 Ma with an initial Os ratio of 0.7 ± 8.1 (MSWD = 0.29). These data indicate that the porphyry/skarn systems and the stratabound deposits have the same age and suggest an origin within the same metallogenic system. Albite 40Ar/39Ar dating of the magnetite porphyry deposits indicates that they formed at 123 to 125 Ma, i.e., 10–20 Ma later. Both mineralization styles characterize transitional geodynamic regimes, i.e., the period around 140 Ma when the main NS-trending compressional regime changed to an EW-trending lithospheric extensional regime, and the period of 125–115 Ma of dramatic EW-trending lithospheric extension. 相似文献
5.
Taofa Zhou Feng Yuan Shucang Yue Xiaodong Liu Xin Zhang Yu Fan 《Ore Geology Reviews》2007,31(1-4):279-303
The Yueshan mineral belt is geotectonically located at the centre of the Changjiang deep fracture zone or depression of the lower Yangtze platform. Two main types of ore deposits occur in the Yueshan orefield: Cu–Au–(Fe) skarn deposits and Cu–Mo–Au–(Pb–Zn) hydrothermal vein-type deposits. Almost all deposits of economic interest are concentrated within and around the eastern and northern branches of the Yueshan dioritic intrusion. In the vicinity of the Zongpu and Wuhen intrusions, there are many Cu–Pb–Zn–Au–(S) vein-type and a few Cu–Fe–(Au) skarn-type occurrences.Fluid inclusion studies show that the ore-forming fluids are characterised by a Cl−(S)–Na+–K+ chemical association. Hydrothermal activity associated with the above two deposit types was related to the Yueshan intrusion. The fluid salinity was high during the mineralisation processes and the fluid also underwent boiling and mixed with meteoric water. In comparison, the hydrothermal activity related to the Zongpu and Wuhen intrusions was characterised by low salinity fluids. Chlorine and sulphur species played an important role in the transport of ore-forming components.Hydrogen- and oxygen-isotope data also suggest that the ore-forming fluids in the Yueshan mineral belt consisted of magmatic water, mixed in various proportions with meteoric water. The enrichment of ore-forming components in the magmatic waters resulted from fluid–melt partitioning. The ore fluids of magmatic origin formed large Cu–Au deposits, whereas ore fluids of mixed magmatic-meteoric origin formed small- to medium-sized deposits.The sulphur isotopic composition of the skarn- and vein-type deposits varies from − 11.3‰ to + 19.2‰ and from + 4.2‰ to + 10.0‰, respectively. These variations do not appear to have been resulted from changes of physicochemical conditions, rather due to compositional variation of sulphur at the source(s) and by water–rock interaction. Complex water–rock interaction between the ore-bearing magmatic fluids and sedimentary wall rocks was responsible for sulphur mixing. Lead and silicon isotopic compositions of the two deposit types and host rocks provide similar indications for the sources and evolution of the ore-forming fluids.Hydrodynamic calculations show that magmatic ore-forming fluids were channelled upwards into faults, fractures and porous media with velocities of 1.4 m/s, 9.8 × 10− 1 to 9.8 × 10− 7 m/s and 3.6 × 10− 7 to 4.6 × 10− 7 m/s, respectively. A decrease of fluid migration velocity in porous media or tiny fractures in the contact zones between the intrusive rocks and the Triassic sedimentary rocks led to the deposition of the ore-forming components. The major species responsible for Cu transport are deduced to have been CuCl, CuCl2−, CuCl32− and CuClOH, whereas Au was transported as Au2(HS)2S2−, Au(HS)2−, AuHS and AuH3SiO4 complexes. Cooling and a decrease in chloride ion concentration caused by fluid boiling and mixing were the principal causes of Cu deposition. Gold deposition was related to decrease of pH, total sulphur concentration and fO2, which resulted from fluid boiling and mixing.Geological and geochemical characteristics of the two deposit types in the Yueshan mineral belt suggest that there is a close genetic relationship with the dioritic magmatism. Geochronological data show that the magmatic activity and the mineralisation took place between 130 and 136 Ma and represent a continuous process during the Yanshanian time. The cooling of the intrusions and the mineralisation event might have lasted about 6 Ma. The cooling rate of the magmatic intrusions was 80 to 120 °C my− 1, which permitted sufficient heat supply by magma to the ore-forming system. 相似文献
6.
青海省都兰地区位于东昆仑成矿带东段、祁漫塔格-都兰构造岩浆带中,发育矽卡岩型铁多金属矿。本文基于详细的区域地质和矿床地质特征描述,总结了矽卡岩型铁多金属矿床的主要控矿因素、成矿规律和成矿模式,提出主要找矿标志。认为该类矿床大多产于中酸性花岗质侵入岩与寒武系一奥陶系滩间山群和石炭系地层接触带及外接触带部位,中-晚三叠世是... 相似文献
7.
Porphyry Cu–Au and associated polymetallic Fe–Cu–Au deposits in the Beiya Area, western Yunnan Province, south China 总被引：1，自引：0，他引：1
The Alkaline porphyries in the Beiya area are located east of the Jinshajiang suture, as part of a Cenozoic alkali-rich porphyry belt in western Yunnan. The main rock types include quartz-albite porphyry, quartz-K-feldspar porphyry and biotite–K-feldspar porphyry. These porphyries are characterised by high alkalinity [(K2O + Na2O)% > 10%], high silica (SiO2% > 65%), high Sr (> 400 ppm) and 87Sr/86Sr (> 0.706)] ratio and were intruded at 65.5 Ma, between 25.5 to 32.5 Ma, and about 3.8 Ma, respectively. There are five main types of mineral deposits in the Beiya area: (1) porphyry Cu–Au deposits, (2) magmatic Fe–Au deposits, (3) sedimentary polymetallic deposits, (4) polymetallic skarn deposits, and (5) palaeoplacers associated with karsts. The porphyry Cu–Au and polymetallic skarn deposits are associated with quartz–albite porphyry bodies. The Fe–Au and polymetallic sedimentary deposits are part of an ore-forming system that produced considerable Au in the Beiya area, and are characterised by low concentrations of La, Ti, and Co, and high concentrations of Y, Yb, and Sc.The Cenozoic porphyries in western Yunnan display increased alkalinity away from the Triassic Jinshajiang suture. Distribution of both the porphyries and sedimentary deposits in the Beiya area are interpreted to be related to partial melting in a disjointed region between upper mantle lithosphere of the Yangtze Plate and Gondwana continent, and lie within a shear zone between buried Palaeo-Tethyan oceanic lithosphere and upper mantle lithosphere, caused by the subduction and collision of India and Asia. 相似文献
8.
Sedimentary rock-hosted Au deposits in the Dian–Qian–Gui area in southwest China are hosted in Paleozoic and early Mesozoic sedimentary rocks along the southwest margin of the Yangtze (South China) Precambrian craton. Most deposits have characteristics similar to Carlin-type Au deposits and are spatially associated, on a regional scale, with deposits of coal, Sb, barite, As, Tl, and Hg. Sedimentary rock-hosted Au deposits are disseminated stratabound and(or) structurally controlled. The deposits have many similar characteristics, particularly mineralogy, geochemistry, host rock, and structural control. Most deposits are associated with structural domes, stratabound breccia bodies, unconformity surfaces or intense brittle–ductile deformation zones, such as the Youjiang fault system. Typical characteristics include impure carbonate rock or calcareous and carbonaceous host rock that contains disseminated pyrite, marcasite, and arsenopyrite—usually with μm-sized Au, commonly in As-rich rims of pyrite and in disseminations. Late realgar, orpiment, stibnite, and Hg minerals are spatially associated with earlier forming sulfide minerals. Minor base–metal sulfides, such as galena, sphalerite, chalcopyrite, and Pb–Sb–As–sulphosalts also are present. The rocks locally are silicified and altered to sericite–clay (illite). Rocks and(or) stream-sediment geochemical signatures typically include elevated concentrations of As, Sb, Hg, Tl, and Ba. A general lack of igneous rocks in the Dian–Qian–Gui area implies non-pluton-related, ore forming processes. Some deposits contain evidence that sources of the metal may have originated in carbonaceous parts of the sedimentary pile or other sedimentary or volcanic horizons. This genetic process may be associated with formation and mobilization of petroleum and Hg in the region and may also be related to As-, Au-, and Tl-bearing coal horizons. Many deposits also contain textures and features indicative of strong structural control by tectonic domes or shear zones and also suggest syndeformational ore deposition, possibly related to the Youjiang fault system. Several sedimentary rock-hosted Au deposits in the Dian–Qian–Gui area also are of the red earth-type and Au grades have been concentrated and enhanced during episodes of deep weathering. 相似文献
9.
The Chengchao and Jinshandian deposits in the southeast Hubei Province are the two largest skarn Fe deposits in the Middle–Lower Yangtze River Valley metallogenic belt (MLYRVMB), China. They are characterized by NW-striking orebodies that are developed along the contacts between the Late Mesozoic granitoid and Triassic carbonate and clastic rocks. New sensitive high-resolution ion microprobe and laser ablation inductively coupled plasma mass spectrometry zircon U–Pb dating of the mineralization-related quartz diorite and granite at Chengchao yield ages of 129 ± 2 and 127 ± 2 Ma, respectively, and those at Jinshandian of 127 ± 2 and 133 ± 1 Ma, respectively. These results are interpreted as the crystallization age of these intrusions. Hydrothermal phlogopite samples from the skarn ores at Chengchao and Jinshandian have the plateau 40Ar–39Ar ages of 132.6 ± 1.4 and 131.6 ± 1.2 Ma, respectively. These results confirm that both intrusions and associated skarn Fe mineralization were formed contemporaneously in the middle Early Cretaceous time. New zircon U–Pb and phlogopite 40Ar–39Ar ages in this study, when combined with available precise geochronological data, demonstrate that there were two discontinuous igneous events, corresponding to two episodes of skarn Fe-bearing mineralization in the southeast Hubei Province: (1) 140–136 Ma diorites and quartz diorites and 141–137 Ma skarn Cu–Fe or Fe–Cu deposits and (2) 133–127 Ma quartz diorites and granites and 133–132 Ma skarn Fe deposits. This scenario is similar to that proposed for the entire MLYRVMB. The intrusions related to skarn Fe deposits show obviously petrological and geochemical differences from those related to skarn Cu–Fe or Fe–Cu deposits. The former are quartz diorite and diorite in petrology and have similar adakitic geochemical signatures and in equilibrium with a garnet-rich residue, whereas the latter are petrologically granite and quartz diorite that are distinguishable from adakitic rocks and in equilibrium with a plagioclase residue. These features indicated that two episodes of magmatism and the formation of skarn Fe-bearing deposits in the southeast Hubei Province, MLYRVMB, might be associated lithosphere thinning induced by asthenosphere upwelling during the Late Mesozoic. 相似文献
10.
Twenty‐one Mo–W–Cu deposits and prospects have been discovered in the Honggor–Shamai district, Inner Mongolia, north China during past 5 years. This district is located in the central and western parts of the Chagan Obo–Aoyoute–Chaobulen tectono‐magmatic belt, which is part of the Central Asian Orogenic Belt. The Mo–W–Cu deposits in the district are associated with Mesozoic granitoid intrusions and occur as veins, stockwork, and dissemination. The geological features of these newly discovered deposits are similar to porphyry‐type deposits worldwide. Two mineralization events have been identified: Indosinian (235–224 Ma) and Yanshanian (137–131 Ma). It is proposed that these deposits and prospects in the Honggor–Shamai district were related to the post‐collisional extension linked to the Indosinian orogeny during the Middle–Late Triassic period, but some of those deposits were overprinted by mineralization associated with the Cretaceous magmatic‐hydrothermal (Yanshanian) event. 相似文献
11.
西藏冈底斯地区矽卡岩型矿床资源潜力初析 总被引：21，自引：4，他引：21
近年来，随着地质调查工作的进展，在位于雅鲁藏布结合带与班公湖一怒江结合带之间的冈底斯构造-岩浆带内，新发现了一批矽卡岩型铁、铜、金、铅锌矿床，构成规模宏大的矽卡岩型成矿带。矽卡岩型矿床的含矿地层岩石为石炭系-二叠系、侏罗系和白垩系的灰岩、白云质灰岩和砂岩；有关的侵入岩主要是燕山期-喜马拉雅期的花岗岩、花岗闪长岩及其浅成相侵入体，多数为小-中型的岩株，一般具斑状结构。冈底斯成矿带的矽卡岩型矿床与长江中下游的铁铜金矽卡岩型矿床在许多方面可以相比较。冈底斯地区具有巨大的找矿潜力，有望成为中国新的富铜富铁资源基地。 相似文献
12.
Run-Sheng Han Cong-Qiang Liu Zhi-Long Huang Jin Chen De-Yun Ma Li Lei Geng-Sheng Ma 《Ore Geology Reviews》2007,31(1-4):360
The Huize Zn–Pb–(Ag) district, in the Sichuan–Yunnan–Guizhou Zn–Pb–(Ag) metallogenic region, contains significant high-grade, Zn–Pb–(Ag) deposits. The total metal reserve of Zn and Pb exceeds 5 Mt. The district has the following geological characteristics: (1) high ore grade (Zn + Pb ≥ 25 wt.%); (2) enrichment in Ag and a range of other trace elements (Ge, In, Ga, Cd, and Tl), with galena, sphalerite, and pyrite being the major carriers of Ag, Ge, Cd and Tl; (3) ore distribution controlled by both structural and lithological features; (4) simple and limited wall-rock alteration; (5) mineral zonation within the orebodies; and (6) the presence of evaporite layers in the ore-hosting wall rocks of the Early Carboniferous Baizuo Formation and the underlying basement.Fluid-inclusion and isotope geochemical data indicate that the ore fluid has homogenisation temperatures of 165–220 °C, and salinities of 6.6–12 wt.% NaCl equiv., and that the ore-forming fluids and metals were predominantly derived from the Kunyang Group basement rocks and the evaporite-bearing rocks of the cover strata. Ores were deposited along favourable, specific ore-controlling structures. The new laboratory and field studies indicate that the Huize Zn–Pb–(Ag) district is not a carbonate-replacement deposit containing massive sulphides, but rather the deposits can be designated as deformed, carbonate-hosted, MVT-type deposits. Detailed study of the deposits has provided new clues to the localisation of concealed orebodies in the Huize Zn–Pb–(Ag) district and of the potential for similar carbonate-hosted sulphide deposits elsewhere in NE Yunnan Province, as well as the Sichuan–Yunnan–Guizhou Zn–Pb–(Ag) metallogenic region. 相似文献
13.
The Huangshilao gold deposit (>13.5 t Au) is comprised of stratabound pyrite‐dominant massive sulfide ores, and is distinguished from the skarn Cu, Au, and Cu–Au deposits that are dominant in the Tongguanshan orefield, Tongling, east‐central China. The stratabound orebodies are situated along flexural slip faults along the unconformity between the Upper Devonian Wutong and the Upper Carboniferous Huanglong Formations. The ores, dominated by crystallized pyrite, colloform pyrite, and pyrrhotite, are systematically sampled from the underground stopes along strike drifts. The δ34S values of ore sulfides yield a wide variation from ?11.3 to 11.4‰, but mostly within 4–8‰, corresponding to the δ34S range (3.4–8.7‰) of the Yanshanian Tongguanshan and Tianshan quartz diorite intrusions in the Tongguanshan orefield, suggesting a magmatic dominated sulfur source. Few obvious negative δ34S values are induced by an involvement of sedimentation‐related biogenic sulfur. The wide δ34S variation denotes an incongruent physical and chemical interaction of the two sources. Combined analysis of gold contents and sulfur isotopes of the sulfides show that the magmatic hydrothermal solution provides primary metals despite a small quantity that may have been contributed by the sedimentary pyrites. The hydrothermal alteration, thermal metamorphism, trace element concentration in pyrites, and existing aeromagnetic data jointly suggest that the hydrothermal fluid migrated vertically from an intrusion below, along the flexural slip faults, but not laterally from the nearby outcrop of Tianshan stock. 相似文献
14.
15.
16.
福建政和夏山铅锌矿是福建省于20世纪50年代发现的大型铅锌矿,其成因类型长期存在分歧。前人多将其归为沉积-改造型铅锌矿床,即矿层在新元古代由含矿热水沉积形成,燕山期岩浆侵入仅对其进行了改造和富集;但也有部分学者认为夏山铅锌矿是受燕山期铜盆庵正长花岗岩侵入作用影响所形成的矽卡岩型铅锌矿床。本文通过对夏山铅锌矿矿区精细的地质调查表明,夏山铅锌矿体的分布及形态与矿区内花岗斑岩密切相关,铜盆庵岩体对夏山铅锌矿的影响表现在后期的叠加、富集作用。为精确厘定夏山铅锌矿成岩成矿时代,文章对夏山铅锌矿矿区内与成矿相关的花岗斑岩进行了精确的锆石La-ICP-MS U-Pb定年工作。测试结果表明矿区花岗斑岩的侵入时代为(173.0±1.7)Ma,要早于铜盆庵岩体(155～150 Ma),而夏山铅锌矿则形成于(173±1.7)Ma(燕山早期)。这一成矿时代与赣东北地区主要的铜、银、铅锌多金属矿的成矿时代较为一致,表明武夷山地区对华南中生代第一期爆发式成矿作用亦有积极响应,具有早燕山期铜、银、铅锌多金属矿的成矿潜力。而结合前人研究成果,将武夷成矿带北段成矿期次划分为173 Ma和90～125 Ma两个重要的成矿期次,这一研究结果对武夷山成矿带进一步开展隐伏、叠加矿床的找矿工作及成矿规律研究具有重要意义。 相似文献
17.
老厂坪子地区已发现十余个矿床(点),矿体赋存于花岗岩与碳酸盐岩接触带及其附近的断裂破碎带中,并受其双重控制。矿石品位较富,矽卡岩型和热液型成因,矿质来源于二叠系、三叠系碳酸盐岩及燕山早期岩浆岩。 相似文献
18.
喜峰口-叨尔登金成矿带上的金矿床产出空间各不相同,矿床的围岩有花岗岩、变质岩及沉积岩.矿体的分布均受控于断层破碎带,矿床成因与热液有关.通过对铅、硫以及包裹体水同位素的研究,确定了金矿在成矿时间上与燕山期花岗岩一致,成矿热液中的水主要来源于花岗岩,成矿物质黄铁矿中的硫来源于花岗岩.因此说明研究区的金矿为燕山期花岗岩期后热液成因.产于地壳深部的富含成矿物质的花岗岩浆在上侵过程中同化了部分太古宙变质岩并从中汲取了成矿物质,将其带到地壳浅部,最后沿构造裂隙充填成矿. 相似文献
19.
Abstract: Sn, B and Pb-Zn skarn, vein and disseminated deposits occur in the eastern part of Sikhote-Alin fold system associated with the late Cretaceous-earliest Paleogene volcano-plutonic complexes, which are products of a continental margin-type subduction along the East Sikhote-Alin belt. There are two metallogenic zones where the ore deposits are concentrated. The Taukha metallogenic zone combining B and Pb-Zn skarn, vein and disseminated deposits occurs on the main volcanic chain along the Japan Sea coast. Late Cretaceous-earliest Paleogene calc-alkaline plutonic and volcanic rocks of magnetite series predominate here. Volcanic rocks overlie on the lower Cretaceous Taukha terrane which consists of abundant olistostromes with numerous olistoliths of Triassic limestones. During the middle-late Cretaceous time, an ignimbrite erupted and formed a huge borosilicate skarn deposit. A later subduction related volcanism of the late Cretaceous-earliest Paleogene stage (70–55 Ma) was predominated by andesites and rhyodacites. Many Pb-Zn skarn and vein deposits were formed. Sulfur isotope compositions of galena in the B and Pb-Zn deposits of the Taukha metallogenic zone vary from –1. 3 to +2. 0%, averaging 0% in the δ34 S. 相似文献
20.
Gang Yu Jiangfeng Chen Chunji Xue Yuchuan Chen Fukun Chen Xiaoyue Du 《Ore Geology Reviews》2009,35(3-4):367-382
The Qingchengzi orefield in northeastern China, is a concentration of several Pb–Zn, Ag, and Au ore deposits. A combination of geochronological and Pb, Sr isotopic investigations was conducted. Zircon SHRIMP U–Pb ages of 225.3 ± 1.8 Ma and 184.5 ± 1.6 Ma were obtained for the Xinling and Yaojiagou granites, respectively. By step-dissolution Rb–Sr dating, ages of 221 ± 12 Ma and 138.7 ± 4.1 Ma were obtained for the sphalerite of the Zhenzigou Zn–Pb deposit and pyrargyrite of the Ag ore in the Gaojiabaozi Ag deposit, respectively. Pb isotopic ratios of the Ag ore at Gaojiabaozi (206Pb/204Pb = 18.38 to 18.53) are higher than those of the Pb–Zn ores (206Pb/204Pb = 17.66 to 17.96; Chen et al. [Chen, J.F., Yu, G., Xue, C.J., Qian, H., He, J.F., Xing, Z., Zhang, X., 2005. Pb isotope geochemistry of lead, zinc, gold and silver deposit clustered region, Liaodong rift zone, northeastern China. Science in China Series D 48, 467–476.]). Triassic granites show low Pb isotopic ratios (206Pb/204Pb = 17.12 to 17.41, 207Pb/204Pb = 15.47 to 15.54, 208Pb/204Pb = 37.51 to 37.89) and metamorphic rocks of the Liaohe Group have high ratios (206Pb/204Pb = 18.20 to 24.28 and 18.32 to 20.06, 207Pb/204Pb = 15.69 to 16.44 and 15.66 to 15.98, 208Pb/204Pb = 37.29 to 38.61 and 38.69 to 40.00 for the marble of the Dashiqiao Formation and schist of the Gaixian Formation, respectively).Magmatic activities at Qingchengzi and in adjacent regions took place in three stages, and each contained several magmatic pulses: ca. 220 to 225 Ma and 211 to 216 Ma in the Triassic; 179 to 185 Ma, 163 to 168 Ma, 155 Ma and 149 Ma in the Jurassic, as well as ca. 140 to 130 Ma in the Early Cretaceous. The Triassic magmatism was part of the Triassic magmatic belt along the northern margin of the North China Craton produced in a post-collisional extensional setting, and granites in it formed by crustal melting induced by mantle magma. The Jurassic and Early Cretaceous magmatism was related to the lithospheric delamination in eastern China. The Triassic is the most important metallogenic stage at Qingchengzi. The Pb–Zn deposits, the Pb–Zn–Ag ore at Gaojiabaozi, and the gold deposits were all formed in this stage. They are temporally and spatially associated with the Triassic magmatic activity. Mineralization is very weak in the Jurassic. Ag ore at Gaojiabaozi was formed in the Early Cretaceous, which is suggested by the young Rb–Sr isochron age, field relations, and significantly different Pb isotopic ratios between the Pb–Zn–Ag and Ag ores. Pb isotopic compositions of the Pb–Zn ores suggest binary mixing for the source of the deposits. The magmatic end-member is the Triassic granites and the other metamorphic rocks of the Liaohe Group. Slightly different proportions of the two end-members, or an involvement of materials from hidden Cretaceous granites with slightly different Pb isotopic ratios, is postulated to interpret the difference of Pb isotopic compositions between the Pb–Zn–(Ag) and Ag ores. Sr isotopic ratios support this conclusion. At the western part of the Qingchengzi orefield, hydrothermal fluid driven by the heat provided by the now exposed Triassic granites deposited ore-forming materials in the low and middle horizons of the marbles of the Dashiqiao Formation near the intrusions to form mesothermal Zn–Pb deposits. In the eastern part, hydrothermal fluids associated with deep, hidden Triassic intrusions moved upward along a regional fault over a long distance and then deposited the ore-forming materials to form epithermal Au and Pb–Zn–Ag ores. Young magmatic activities are all represented by dykes across the entire orefield, suggesting that the corresponding main intrusion bodies are situated in the deep part of the crust. Among these, only intrusions with age of ca. 140 Ma might have released sufficient amounts of fluid to be responsible for the formation of the Ag ore at Gaojiabaozi.Our age results support previous conclusions that sphalerite can provide a reliable Rb–Sr age as long as the fluid inclusion phase is effectively separated from the “sulfide” phase. Our work suggests that the separation can be achieved by a step-resolution technique. Moreover, we suggest that pyrargyrite is a promising mineral for Rb–Sr isochron dating. 相似文献