共查询到20条相似文献，搜索用时 83 毫秒
1.
How was Taiwan created? 总被引：4，自引：0，他引：4
Since the beginning of formation of proto-Taiwan during late Miocene (9 Ma), the subducting Philippine (PH) Sea plate moved continuously through time in the N307° direction at a 5.6 cm/year velocity with respect to Eurasia (EU), tearing the Eurasian plate. Strain states within the EU crust are different on each side of the western PH Sea plate boundary (extensional in the Okinawa Trough and northeastern Taiwan versus contractional for the rest of Taiwan Island). The B feature corresponds to the boundary between the continental and oceanic parts of the subducting Eurasian plate and lies in the prolongation of the ocean–continent boundary of the northern South China Sea. Strain rates in the Philippines to northern Taiwan accretionary prism are similar on each side of B (contractional), though with different strain directions, perhaps in relation with the change of nature of the EU slab across B. Consequently, in the process of Taiwan mountain building, the deformation style was probably not changing continuously from the Manila to the Ryukyu subduction zones. The Luzon intra-oceanic arc only formed south of B, above the subducting Eurasian oceanic lithosphere. North of B, the Luzon arc collided with EU simultaneously with the eastward subduction of a portion of EU continental lithosphere beneath the Luzon arc. In its northern portion, the lower part of the Luzon arc was subducting beneath Eurasia while the upper part accreted against the Ryukyu forearc. Among the consequences of such a simple geodynamic model: (i) The notion of continuum from subduction to collision might be questioned. (ii) Traces of the Miocene volcanic arc were never found in the southwestern Ryukyu arc. We suggest that the portion of EU continental lithosphere, which has subducted beneath the Coastal Range, might include the Miocene Ryukyu arc volcanoes formed west of 126°E longitude and which are missing today. (iii) The 150-km-wide oceanic domain located south of B between the Luzon arc and the Manila trench, above the subducting oceanic EU plate (South China Sea) was progressively incorporated into the EU plate north of B. 相似文献
2.
西太平洋边缘构造带是地球上规模最大最复杂的板块边界,以台湾和马鲁古海为界,自北往南大致可以分为3段。北段是典型的沟-弧-盆体系,千岛海盆、日本海盆及冲绳海槽均为典型的弧后扩张盆地。中段菲律宾岛弧构造带为双向俯冲带,构造复杂,新生代经历大的位移和重组,使得欧亚大陆边缘的南海、苏禄海和苏拉威西海成因存在很大的争议。南段新几内亚—所罗门构造带是太平洋板块、印度—澳大利亚及欧亚板块共同作用的结果,既有不同阶段的俯冲、碰撞,也有大规模的走滑与弧后的扩张,其间既有新扩张的海盆,又有正在俯冲消亡的海盆。台湾岛处于枢纽部位,欧亚板块在此被撕裂,南部欧亚大陆边缘南海洋壳沿马尼拉海沟俯冲于菲律宾岛弧之下,而北部菲律宾海洋壳沿琉球海沟俯冲欧亚大陆之下。马鲁古海是西太平洋板块边界又一转折点,马鲁古海板块往东下插于哈马黑拉之下,往西下插于桑义赫弧,形成反U形双向俯冲汇聚带,其洋壳板块已基本全部消失,致使哈马黑拉弧与桑义赫弧形成弧-弧碰撞。 相似文献
3.
A synthesis of the geologic evolution of Taiwan 总被引：2，自引：0，他引：2
C.S. Ho 《Tectonophysics》1986,125(1-3)
The island arc of Taiwan is composed of Cenozoic geosynclinal sediments more than 10,000 m thick, lying on a pre-Tertiary metamorphic basement. Pleistocene to Miocene andesitic islands surround the main island and are related mostly to arc magmatism. The Penghu Island Group in the Taiwan Strait is covered with Pleistocene flood basalt. Neogene shallow marine clastic sediments are exposed mainly in the western foothills with Pleistocene andesitic extrusives at the northern tip and the northeastern offshore islands. A thick sequence of Paleogene to Miocene argillitic to slaty metaclastic rocks underlies the western Central Range and forms the immediate sedimentary cover on the pre-Tertiary metamorphic complex to the east, which represents an older Mesozoic arc-trench system. The Coastal Range in eastern Taiwan is a Neogene andesitic magmatic arc, including also a large variety of volcaniclastic and turbiditic sediments. Cenozoic Taiwan is the site of arc-continent collision where the Luzon arc on the Philippine Sea plate overrides the Chinese continental margin on the Eurasian plate. East and northeast of Taiwan, the polarity of subduction changes whereby the oceanic Philippine Sea plate is subducting beneath the Ryukyu arc system on the Eurasian plate. Continent-arc collision in Taiwan island is anomalous and may occur in a broad belt of deformation rather than along a well-defined plate boundary or subduction zone. 相似文献
4.
The Luzon Island is a volcanic arc sandwiched by the eastward subducting South China Sea and the northwestward subducting Philippine Sea plate.Through experiments of plane-stress,elastic,and 2-dimensional finite-element modeling,we evaluated the relationship between plate kinematics and present-day deformation of Luzon Island and adjacent sea areas.The concept of coupling rate was applied to define the boundary velocities along the subduction zones.The distribution of velocity fields calculated in our models was compared with the velocity field revealed by recent geodetic (GPS) observations.The best model was obtained that accounts for the observed velocity field within the limits of acceptable mechanical parameters and reasonable boundary conditions.Sensitivity of the selection of parameters and boundary conditions were evaluated.The model is sensitive to the direction of convergence between the South China Sea and the Philippine Sea plates,and to different coupling rates in the Manila trench,Philippine trench and eastern Luzon trough.We suggest that a change of±15° of the di rection of motion of the Philippine Sea plate can induce important changes in the distribution of the computed displacement trajectories,and the movement of the Philippine Sea plate toward azimuth330° best explains the velocity pattern observed in Luzon Island.In addition,through sensitivity analysis we conclude that the coupling rate in the Manila trench is much smaller compared with the rates in the eastern Luzon trough and the Philippine trench.This indicates that a significant part of momentum of the Philippine Sea plate motion has been absorbed by the Manila trench;whereas,a part of the momentum has been transmitted into Luzon Island through the eastern Luzon trough and the Philippine trench. 相似文献
5.
台湾造山带是中新世晚期以来相邻菲律宾海板块往北西方向移动,导致北吕宋岛弧系统及弧前增生楔与欧亚大陆边缘斜碰撞形成的。目前该造山带仍在活动,虽然规模很小,但形成了多数大型碰撞造山带中的所有构造单元,是研究年轻造山系统的理想野外实验室,为理解西太平洋弧-陆碰撞过程和边缘海演化提供了一个独特的窗口。本文总结了二十一世纪以来对台湾造山带的诸多研究进展,讨论了其构造单元划分及演化过程。我们将台湾造山带重新划分为6个构造单元,由西至东分依次为:(1)西部前陆盆地;(2)中央山脉褶皱逆冲带;(3)太鲁阁带;(4)玉里-利吉蛇绿混杂岩带;(5)纵谷磨拉石盆地;(6)海岸山脉岛弧系统。其中,西部前陆盆地为6.5Ma以来伴随台湾造山带的隆升剥蚀形成沉积盆地。中央山脉褶皱逆冲带为新生代(57~5.3Ma)欧亚大陆东缘伸展盆地沉积物由于弧-陆碰撞受褶皱、逆冲及变质作用改造形成的。太鲁阁带是造山带中的古老陆块,主要记录中生代古太平洋俯冲在欧亚大陆活动边缘形成的岩浆、沉积和变质岩作用。玉里-利吉蛇绿混杂岩带和海岸山脉岛弧系统分别为中新世中期(~18Ma)以来南中国海板块向菲律宾海板块之下俯冲形成的岛弧和弧前增生楔,其中玉里混杂岩中有典型低温高压变质作用记录,变质年龄为11~9Ma;岛弧火山作用的主要时限为9.2~4.2Ma。纵谷磨拉石盆地记录1.1Ma以来的山间盆地沉积。台湾造山带的构造演化可划分为4个阶段:(a)古太平洋板块俯冲与欧亚大陆边缘增生阶段(200~60Ma);(b)欧亚大陆东缘伸展和南中国海扩张阶段(60~18Ma);(c)南中国海俯冲阶段(18~4Ma);(d)弧-陆碰撞阶段(<6Ma)。台湾弧-陆碰撞造山带是一个特殊案例,其弧-陆碰撞并不伴随着弧-陆之间的洋盆消亡,而是由于北吕宋岛弧及弧前增生楔伴随菲律宾海板块运动向西北方走滑,仰冲到欧亚大陆边缘,形成现今的台湾造山带。 相似文献
6.
The Philippine Sea plate, located between the Pacific, Eurasian and Australian plates, is the world's largest marginal basin plate. The motion of the Philippine Sea plate through time is poorly understood as it is almost entirely surrounded by subduction zones and hence, previous studies have relied on palaeomagnetic analysis to constrain its rotation. We present a comprehensive analysis of geophysical data within the Parece Vela and Shikoku Basins—two Oligocene to Miocene back-arc basins—which provide independent constraints on the rotational history of the Philippine Sea plate by means of their seafloor spreading record. We have created a detailed plate model for the opening of the Parece Vela and Shikoku Basins based on an analysis of all available magnetic, gravity and bathymetric data in the region. Subduction along the Izu–Bonin–Mariana trench led to trench roll-back, arc rupture and back-arc rifting in the Parece Vela and Shikoku Basins at 30 Ma. Seafloor spreading in both basins developed by chron 9o (28 Ma), and possibly by chron 10o (29 Ma), as a northward and southward propagating rift, respectively. The spreading orientation in the Parece Vela Basin was E–W as opposed to ENE–WSW in the Shikoku Basin. The spreading ridges joined by chron 6By (23 Ma) and formed a R–R–R triple junction to accommodate the difference in spreading orientations in both basins. At chron 6No (20 Ma), the spreading direction in the Parece Vela Basin changed from E–W to NE–SW. At chron 5Ey (19 Ma), the spreading direction in the Shikoku Basin changed from ENE–WSW to NE–SW. This change was accompanied by a marked decrease in spreading rate. Cessation of back-arc opening occurred at 15 Ma, a time of regional plate reorganisation in SE Asia. We interpret the dramatic change in spreading rate and direction from E–W to NE–SW at 20±1.3 Ma as an expression of Philippine Sea plate rotation and is constrained by the spacing between our magnetic anomaly identifications and the curvature of the fracture zones. This rotation was previously thought to have begun at 25 Ma as a result of a global change in plate motions. Our results suggest that the Philippine Sea plate rotated clockwise by about 4° between 20 and 15 Ma about a pole located 35°N, 84°E. This implies that the majority of the 34° clockwise rotation inferred to have occurred between 25 and 5 Ma from paleomagnetic data may have in fact been confined to the period between 15 and 5 Ma. 相似文献
7.
Taiwan is located in the axis of the Manila Trench. It results from an oblique collision between the northernmost part of the Luzon arc and the Chinese passive margin. This active collision follows the subduction of the Oligocene-Miocene oceanic crust of the South China Sea along the Manila Trench. The tectonized Chinese margin emerged in the Hengchun peninsula (South Taiwan). Gentle folds which are delineated by the Quaternary reefal limestones demonstrate Recent deformations. These folds deformed a thick detrital sequence of Miocene age (Ssuchung Chi series) which was previously strongly folded and thrust westward (axis NS-N20) upon the Renting mélange of Latest Miocene age. These main deformations, sealed by the Middle Pliocene, are the evidence for the onset of collision in this part of Taiwan at the end of the Miocene. Because of its obliquity, the collision started already in the northern part of Taiwan during the Late Miocene (6-7-8 Ma ?).The Ssuchung Chi series, a sequence of proximal turbidites, has contained, since the Middle Miocene (NN 6~13 Ma), fragments of an Oligocene to Lower Miocene oceanic crust. This ophiolitic material is very similar to the East Taiwan Ophiolite of the Coastal Range. It originated most probably from a slice of South China Sea crust obducted in Middle Miocene times (13–14 Ma) upon the Chinese margin (North of the Hengchun peninsula). This obduction occurred 7 to 8 Ma before the beginning of collision. These results make it possible to propose an evolutionary model for Taiwan from the Oligocene to the Recent, with the different phases of a collision between a volcanic arc and a passive margin. 相似文献
8.
Philippe Huchon Eric Barrier Jean-Claude de Bremaecker Jacques Angelier 《Tectonophysics》1986,125(1-3)
Field analyses of Plio-Quaternary compressional deformations in Taiwan have enabled us to reconstruct the paleostress trajectories resulting from the collision of the Luzon arc (Philippine Sea plate) with the Chinese continental margin (Eurasian plate). The direction of the maximum compressional stress σ1 shows a fan-shaped pattern that we interpret as resulting from the collision of a rigid body (the Luzon arc) indenting a more deformable material (the thick sediments of the Chinese continental margin). Simple analytical models qualitatively explain the fan-shaped pattern, but the influence of various parameters such as boundary conditions and rheology cannot be quantitatively accounted for by this approach. Consequently, we have used a finite element technique to compute the stresses and strains induced by the push of a rigid body against a two-dimensional, viscous material. The boundary conditions are the velocities based on plate kinematics. A motion in the N300°E direction best explains the stress trajectories observed in central Taiwan. Viscosity contrasts as well as small changes in the shape of the northern edge of the indenter have little influence on the computed stress pattern. The most important parameter is the direction of convergence. Our model quantitatively explains the general pattern of the stress trajectories observed in the collision zone of Taiwan, between the Philippine Sea plate and Eurasia. 相似文献
9.
Yasushi Watanabe 《Mineralium Deposita》2005,40(3):307-323
Kyushu Island, Japan, is located at the junction of the Southwest Japan arc and the Ryukyu arc. There are two major late Cenozoic
epithermal gold-silver provinces in Kyushu, which are termed the Northern and Southern provinces. The provinces are characterized
by: 1) Pliocene volcanism dominated by calc-alkaline andesite, followed by Quaternary volcanism including extrusion of both
calc-alkaline and tholeiitic magmas; 2) formation of extensional grabens; 3) Pliocene to Pleistocene mineralization, which
was dominated by abundant low sulfidation (LS) epithermal deposits with a few high sulfidation (HS) examples. The two epithermal
gold-silver provinces have evolved differently since about 5 Ma; the Northern province has exhibited diminished hydrothermal
activity from the Pliocene to Pleistocene, whereas the Southern province has witnessed increased hydrothermal activity mainly
in easterly and northerly directions. Changes of tectonic setting from the Pliocene to Pleistocene account for the variable
trends in epithermal gold deposit formation. Westward oblique subduction of the Philippine Sea plate beneath the Southwest
Japan arc caused development of the Hohi graben and arc-related volcanism at about 6 Ma. This was associated with widespread
LS mineralization in and surrounding the Hohi graben, as is represented by the Bajo and Taio deposits. The subduction of the
relatively buoyant Kyushu-Palau ridge during the early Pliocene strengthened the coupling between the slab and overriding
Ryukyu arc, leading to polygenetic andesite volcanism with associated HS (Kasuga, Iwato, and Akeshi) and LS (Kushikino) mineral
deposits forming in the Southern province. A change of the subduction direction of the Philippine Sea plate, from west to
north-northwest in the early Pliocene, increased the orthogonal convergence rate between the Southwest Japan arc and the Philippine
Sea plate, resulting in a decrease of volcanic and hydrothermal activity in the Hohi graben of the Northern province. The
more northerly subduction of the Philippine Sea plate shifted the locus of the Kyushu-Palau ridge subduction northward, resulting
in underplating of the older (85–60 Ma), negatively buoyant Amami basin oceanic slab in the Southern province, rather than
continued subduction of the young (27–15 Ma), buoyant Shikoku basin slab. This replacement caused steepening of the slab angle
and slab-rollback in the Southern province, which was associated with regional extension, an eastward shift of the Ryukyu
volcanic front, and development of the Kagoshima and Shimabara grabens, as well as the Okinawa trough. Rhyolite and basalt
volcanism, in addition to andesite volcanism, have occurred since 2 Ma in the area of the Ryukyu back arc; coincident LS mineralization
at Hishikari and Ohkuchi was affiliated with the rhyolite volcanism. Another change of the subduction direction of the Philippine
Sea plate to the northwest occurred at 2–1 Ma. The forearc sliver of the Southwest Japan arc shifted westward, in association
with right-lateral strike-slip faulting along the Median tectonic line, due to the increase of the westward convergence rate.
This shift resulted in shortening and cessation of graben development in the Hohi area, restricting the subsequent volcanism
and related hydrothermal activity to the central part of the graben. 相似文献
10.
利用中国地震台网和ISC台站记录的P波到时数据,采用球坐标系有限差分地震层析成像方法反演了南海东北部及其邻近地区壳幔三维P波速度结构,并分析了不同地质单元的构造差异及其深部特征。结果表明:南海东北部表现出陆架地区的岩石层特性,属于华南大陆向海区的延伸,岩石层厚度较大,现今不存在大规模的地幔热流活动,推测大陆边缘张裂作用仅限于地壳内部而没有延伸进入上地幔,具有非火山型大陆边缘的深部特点。中央海盆附近上地幔P波速度明显降低,与海盆下方地幔热流活动密切相关。不同的速度异常特征表明:华南大陆暨台湾地区属于欧亚大陆的正常地壳或是与菲律宾海板块相互作用产生的增厚型地壳,冲绳海槽则是弧后扩张产生的减薄型地壳。滨海断裂带作为华南大陆高速异常和南海北部高速异常的分界,代表了一定地质时期华南地块和南海地块的拼合边界。断裂附近的上地幔低速异常揭示了闽粤沿海岩浆作用的深层动力机制。吕宋岛弧、马尼拉海沟、东吕宋海槽的速度异常与其所处的特殊构造位置有密切的关系,清晰地反映出岛弧俯冲带的地壳结构差异;台湾南部至吕宋岛弧的上地幔低速异常揭示了两个重要火山链的深部构造特征,北吕宋海脊下方100 km深度的条带状高速异常有可能代表了俯冲下沉的岩石层板片。 相似文献
11.
Volcanoes were created, grew, uplifted, became dormant or extinct, and were accreted as part of continents during continuous arc–continent collision. Volcanic rocks in Eastern Taiwan’s Coastal Range (CR) are part of the northern Luzon Arc, an oceanic island arc produced by the subduction of the South China Sea Plate beneath the Philippine Sea Plate. Igneous rocks are characterized by intrusive bodies, lava and pyroclastic flows, and volcaniclastic rocks with minor tephra deposits. Based on volcanic facies associations, Sr–Nd isotopic geochemistry, and the geography of the region, four volcanoes were identified in the CR: Yuemei, Chimei, Chengkuangao, and Tuluanshan. Near-vent facies associations show different degrees of erosion in the volcanic edifices for Chimei, Chengkuangao, and Tuluanshan. Yuemei lacks near-vent rocks, implying that Yuemei’s main volcanic body may have been subducted at the Ryukyu Trench with the northward motion of the Philippine Sea Plate. These data suggest a hypothesis for the evolution of volcanism and geomorphology during arc growth and ensuing arc–continent collision in the northern Luzon Arc, which suggests that these volcanoes were formed from the seafloor, emerging as islands during arc volcanism. They then became dormant or extinct during collision, and finally, were uplifted and accreted by additional collision. The oldest volcano, Yuemei, may have already been subducted into the Ryukyu Trench. 相似文献
12.
Kirk McIntosh Yosio Nakamura T.-K. Wang R.-C. Shih Allen Chen C.-S. Liu 《Tectonophysics》2005,401(1-2):23-54
We have used combined onshore and offshore wide-angle seismic data sets to model the velocity structure of the Taiwan arc–continent collision along three cross-island transects. Although Taiwan is well known as a collisional orogen, relatively few data have been collected that reveal the deeper structure resulting from this lithospheric-scale process. Our southern transect crosses the Hengchun Peninsula of southernmost Taiwan and demonstrates characteristics of incipient collision. Here, 11-km-thick, transitional crust of the Eurasian plate (EUP) subducts beneath a large, rapidly growing accretionary prism. This prism also overrides the N. Luzon forearc to the east as it grows. Just west of the arc axis there is an abrupt discontinuity in the forearc velocity structure. Because this break is accompanied by intense seismicity, we interpret that the forearc block is being detached from the N. Luzon arc and Philippine Sea plate (PSP) at this point. Our middle transect illustrates the structure of the developing collision. Steep and overturned velocity contours indicate probable large-scale thrust boundaries across the orogen. The leading edge of the coherent PSP appears to extend to beneath the east coast of Taiwan. Deformation of the PSP is largely limited to the remnant N. Luzon arc with no evidence of crustal thickening to the east in the Huatung basin. Our northern transect illustrates slab–continent collision—the continuing collision of the PSP and EUP as the PSP subducts. The collisional contact is below 20 km depths along this transect NE of Hualien. This transect shows elements of the transition from arc–continent collision to Ryukyu arc subduction. Both of our models across the Central Range suggest that the Paleozoic to Mesozoic basement rocks there may have been emplaced as thick, coherent thrust sheets. This suggests a process of partial continental subduction followed by intra-crustal detachment and buoyancy-aided exhumation. Although our models provide previously unknown structural information about the Taiwan orogen, our data do not define the deepest orogenic structure nor the structure of western Taiwan. Additional seismic (active and passive), geologic, and geodynamic modeling work must be done to fully define the structure, the active deformation zones, and the key geodynamic process of the Taiwan arc–continent collision. 相似文献
13.
《International Geology Review》2012,54(16):1932-1944
Nephrite in the Fengtien area of the eastern part of the Central Mountain Range, Taiwan, is associated with antigorite-serpentinite within the Yuli belt, a late Cenozoic subduction–accretionary complex related to the eastward subduction of the South China Sea plate forming the Luzon arc. Diopsidite and clinozoisite rock are two other metasomatic components accompanying nephrite between serpentinites and the greenschist-facies country rock (carbonaceous material-)quartz-mica schist. Detrital zircons were separated from one clinozoisite rock sample, formed through metasomatic replacement after mica-quartz schist at temperatures of 320–420°C or slightly lower, which is lower than the metamorphic temperature conditions of the Yuli belt. Most of the detrital zircons have thin zircon rims less than 15–20 μm wide. These zircon rims, considered as newly formed during metasomatism leading to nephrite/diopsidite/clinozoisite rock formation, were dated by a high lateral resolution secondary ion mass spectrometer (CAMECA NanoSIMS NS50). The resulting 238U/206Pb-204Pb/206Pb inverse isochron gave an age of 3.3 ± 1.7 Ma. The collision of the Eurasian continental margin with the Luzon arc has been suggested to have begun at ca. 6.5 Ma in the Taiwan area. The nephrite formation processes therefore clearly post-dated South China Sea plate subduction. The present date, substantiated by the metamorphic and metasomatic temperature information, demonstrates that the fluid–rock interaction forming Fengtien nephrite would have taken place during a Barrovian-type metamorphic overprint resulting from arc-continent collision, leading to the exhumation of the Yuli belt. This conclusion on nephrite formation with regard to regional tectonics can serve as a working model for future studies on other nephrite deposits with similar occurrences, mostly embedded within Mesozoic or older subduction-accretionary complexes. The Fengtien nephrite deposit is therefore the youngest one of its kind exposed on Earth’s surface. 相似文献
14.
《Journal of Asian Earth Sciences》2000,18(5):603-631
Eastern Indonesia is the zone of interaction between three converging megaplates: Eurasia, the Pacific and Indo-Australia. The geological basis for interpretations of the Tertiary tectonic evolution of Eastern Indonesia is reviewed, and a series of plate tectonic reconstructions for this region at 5 million year intervals covering the last 35 million years is presented.The oldest reconstruction predates the onset of regional collisional deformation. At this time a simple plate configuration is interpreted, consisting of the northward-moving Australian continent approaching an approximately E–W oriented, southward-facing subduction zone extending from the southern margin of the Eurasian continent eastwards into the Pacific oceanic domain. Beginning at about 30 Ma the Australian continental margin commenced collision with the subduction zone along its entire palinspastically-restored northern margin, from Sulawesi in the west to Papua New Guinea in the east. From this time until ca 24 Ma, the Australian continent indented the former arc trend, with the northward convergence of Australia absorbed at the palaeo-northern boundary of the Philippine Sea Plate (the present-day Palau-Kyushu Ridge).At ca 24 Ma the present-day pattern of oblique convergence between the northern margin of Australia and the Philippine Sea Plate began to develop. At about this time a large portion of the Palaeogene colliding volcanic arc (the future eastern Philippines) began to detach from the northern continental margin by left-lateral strike slip. From ca 18 Ma oblique southward-directed subduction commenced at the Maramuni Arc in northern New Guinea. At ca 12 Ma the Sorong Fault Zone strike-slip system developed, effectively separating the Philippines from the Indonesian tectonic domain. The Sorong Fault Zone became inactive at ca 6 Ma, since which time the tectonics of eastern Indonesia has been dominated by the anticlockwise rotation of the Bird’s Head structural block by some 30–40°.Contemporaneously with post-18 Ma tectonism, the Banda Arc subduction–collision system developed off the northwestern margin of the Australian continent. Convergence between Indo-Australia and Eurasia was accommodated initially by northward subduction of the Indian Ocean, and subsequently, since ca 8 Ma, by the development of a second phase of arc-continent collision around the former passive continental margin of NW Australia. 相似文献
15.
大洋钻探与西太平洋构造 总被引：3，自引：0，他引：3
菲律宾海的深海钻探证了弧间扩张和残留弧形模式。小笠原－马里亚纳弧前区的钻探表明，俯冲带初生时伴着海底扩张，形成了异常宽阔的火山活动带。有许多出上蛇绿岩形成于俯冲带初生时的海底扩张环境。日本海的钻探揭示了日本边缘盆地的打开和关闭，新近形成的日本海东缘板边界对华北地区的构造有重要制约作用，中国东海和南海占有独特的构造位置，布置大洋钻探意义重大。文章还强调了中国地质学家从全球地质学的观点研究问题（而不仅 相似文献
16.
花东海盆位于欧亚板块与菲律宾海板块交汇处,是现今西太平洋俯冲体系中唯一遗留的早白垩纪洋盆,是研究西太平洋俯冲构造演化与动力学机制的一个关键区域.前期研究发现,关于花东海盆的基础科学问题迫切需要解决:花东海盆的性质、年龄及形成演化历史如何?南北走向的加瓜海脊是花东海盆的东部边界吗?其隆升机制和构造属性如何?花东海盆的西部边界是马尼拉俯冲带吗?其各构造单元流体作用及其与花东海盆的构造关系如何?为了解决上述科学问题,在花东海盆开展主动源与被动源的综合地球物理探测和地质采样是非常必要的.一方面,可以采用纵/横波联合反演方法获取花东海盆及其东/西边界的深达地幔的精细速度结构,为构建西太平洋俯冲构造体系跨圈层的构造演化模式提供重要的地质地球物理证据,另一方面,为中国未来在花东海盆大洋钻探计划提供重要的基础数据. 相似文献
17.
Mireille Polve Rene C. Maury Sebastien Jego Herve Bellon Ahmed Margoum Graciano P. Yumul Jr Betchaida D. Payot Rodolfo A. Tamayo Jr Joseph Cotten 《Resource Geology》2007,57(2):197-218
Baguio, in the Central Cordillera of Northern Luzon, is a district that displays porphyry copper and epithermal gold mineralization, associated with Early Miocene–Pliocene–Quaternary calc‐alkaline and adakitic intrusions. Systematic sampling, K‐Ar dating, major and trace elements, and Sr, Nd, Pb isotopic analyses of fresh magmatic rocks indicate three magmatic pulses: an Early Miocene phase (21.2–18.7 Ma), a Middle–Late Miocene phase (15.3–8 Ma) and finally a Pliocene–Quaternary event (3–1 Ma). The first phase emplaced evolved calc‐alkaline magmas, essentially within the Agno Batholith complex, and is thought to be related to the westward‐dipping subduction of the West Philippine Basin. After a quiescence period during which the Kennon limestone was deposited, magmatic activity resumed at 15.3 Ma, in connection with the start of the subduction of the South China Sea along the Manila Trench. It emplaced first petrogenetically related and relatively unradiogenic low‐K calc‐alkaline lavas and intermediate adakites. Temporal geochemical patterns observed from 15.3 to 1 Ma include progressive enrichment in K and other large ion lithophile elements, increase in radiogenic Sr and Pb and corresponding decrease in radiogenic Nd. These features are thought to reflect the progressive addition to the Luzon arc mantle wedge of incompatible elements largely inherited from South China Sea sediments. The origin of the long quiescence period, from 8 to 3 Ma, remains problematic. It might represent a local consequence of the docking of the Zambales ophiolitic terrane to Northern Luzon. Then, magmatic activity resumed at 3 Ma, emplacing chemically diversified rocks ranging from low K to high K and including a large proportion of adakites, especially during the Quaternary (dacitic plugs). The authors tentatively relate this diversity to the development of a slab tear linked with the subduction of the fossil South China Sea ridge beneath the Baguio area. 相似文献
18.
菲律宾吕宋岛上约5Ma以来的斑岩铜金矿床主要集中在北部的Baguio和Mankayan地区,它们在时空上与黄岩海山链密切相关。1907~2013年间的地震数据表明,在吕宋岛中部(16°N)附近存在地震稀疏带。吕宋岛上的斑岩铜金矿床分布在该地震稀疏带的两侧。收集到的相应时期埃达克岩的Sr/Y-(La/Yb)N、Sr/Y-Y和La/Yb-Yb图解表明,这些埃达克岩几乎都是洋壳部分熔融形成的。与吕宋岛北部侵入型埃达克岩相比,位于16°N附近的埃达克岩具有更高的Sr含量,这可能与南海古扩张脊俯冲撕裂形成的板片窗有关。斜长石是辉长岩的主要矿物之一,因此,撕裂的洋壳边缘的辉长岩层部分熔融,形成具有更高Sr含量的埃达克质岩浆。而位于吕宋岛南部Bataan弧中的埃达克质火山岩,可能是在南海古扩张脊俯冲之前形成的。根据已发表的斑岩铜金矿床数据,Mankayan地区的成矿年龄在约3.5~1.4Ma,Baguio地区的成矿年龄在约3.1~0.5Ma之间,有从北向南变年轻的趋势,这与黄岩海山链沿马尼拉海沟向南迁移一致。此外,吕宋岛北部Mt.Cagua到Baguio之间存在一个延伸了220km的第四纪火山活动的空隙,该区域大部分火山已经在中新世停止活动。这可能是黄岩海山链的俯冲使得俯冲倾角逐渐变缓、挤压加强而导致的。同时期的斑岩铜矿床正好分布在这一火山空隙中,是俯冲洋壳部分熔融的产物。 相似文献
19.
为了研究西太平洋弧后边缘海盆地的深部构造特征,于2015年在东海琉球岛弧弧后地区布设了一条穿过东海陆架盆地、钓鱼岛隆褶带、南冲绳海槽地区和琉球岛弧的主动源广角反射/折射深部地震剖面.利用走时正演和反演的方法得到的二维速度结构模型展现了西太平洋边缘弧后地区莫霍面的深度由东海陆架地区的大于30 km显著抬升至南冲绳海槽轴部的约16 km,地壳高度拉张减薄,并存在一系列显著的不连续下地壳高速体,速度达6.8~7.3 km/s,这是地幔上涌的显著表现.模型从深部结构角度展现了新生代以来西太平洋弧后盆地扩张中心的变迁,证实了西太平洋洋陆过渡带内深部上涌的软流圈在弧后拉张过程中不断地向洋跃迁,形成自西向东的构造迁移,并带动岩石圈进行幕式伸展,认为新生代向洋变新的构造迁移是太平洋俯冲带后撤引起的一系列弧后深-浅部地球动力效应. 相似文献
20.
Dmitriy V. Alexeiev Christoph Gaedicke Nikolay V. Tsukanov Ralf Freitag 《International Journal of Earth Sciences》2006,95(6):977-993
Structural evolution of the Kamchatka–Aleutian junction area in late Mesozoic and Tertiary was generally controlled by (1) the processes of subduction in Kronotskiy and Proto-Kamchatka subduction zones and (2) collision of the Kronotskiy arc against NE Eurasia margin. Two structural zones of the pre-Pliocene age and six structural assemblages are recognized in studied region. 1: Eastern ranges zone comprises SE-vergent thrust folded belt, which evolved in accretionary and collisional setting. Two structural assemblages (ER1 and ER2), developed there, document shortening in the NW–SE direction and in the N–S direction, respectively. 2: Eastern Peninsulas zone generally corresponds to Kronotskiy arc terrane. Four structural assemblages are recognized in this zone. They characterize (1) precollisional deformations in the accretionary wedge (EP1) and in the fore-arc basin and volcanic belt (EP2), and (2) syn-collisional deformation of the entire Kronotskiy terrane in plunging folds (EP3) and deformations in the foreland basin (EP4). Analysis of paleomagnetic declinations versus present day structural strike in the Kronotskiy arc terrane shows that originally the arc was trending from west to east. Relative position of the accretionary wedge, fore-arc basin and volcanic belt, as well as northward dipping thrusts in accretionary wedge indicate, that a northward dipping subduction zone was located south of the arc. The accretionary wedge developed from the Late Cretaceous through the Eocene, and it implies that the subduction zone maintained its direction and position during this time. It implies that Kronotskiy arc was neither a part of the Pacific nor Kula plates and was located on an individual smaller plate, which included the arc and Vetlovka back-arc basin. Motion of the Kronotskiy arc towards Eurasia was connected only with NW-directed subduction at Kamchatka margin since Middle Eocene (42–44 Ma). Emplacement of the Kronotskiy arc at the Kamchatka margin occurred between Late Eocene and Early Miocene. This is based on the age of syn-collisional plunging folds in Kronotskiy terrane, and provenance data for the Upper Eocene to Middle Miocene Tyushevka basin, which indicate in situ evolution of the basin with respect to Kamchatka. Collision was controlled by the common motion of the Kronotskiy arc with Pacific plate towards the northwest, and by the motion of the Eurasian margin towards the south. The latter motion was responsible for the southward deflection of the western part of the Kronotskiy arc (EP3 structures), and for oblique transpressional structures in the collisional belt (ER2 structures). 相似文献