首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
《Sedimentology》2018,65(3):809-841
Degradation of basin‐margin clinothems around the shelf‐edge rollover zone may lead to the generation of conduits through which gravity flows transport sediment downslope. Many studies from seismic‐reflection data sets show these features, but they lack small‐scale (centimetre to metre) sedimentary and stratigraphic observations on process interactions. Exhumed basin‐margin clinothems in the Tanqua depocentre (Karoo Basin) provide seismic‐reflection‐scale geometries and internal details of architecture with depositional dip and strike control. At the Geelhoek locality, clinothem parasequences comprise siltstone‐rich offshore deposits overlain by heterolithic prodelta facies and sandstone‐dominated deformed mouth bars. Three of these parasequences are truncated by a steep (6 to 22°), 100 m deep and 1·5 km wide asymmetrical composite erosion surface that delineates a shelf‐incised canyon. The fill, from base to top comprises: (i) thick‐bedded sandstone with intrabasinal clasts and multiple erosion surfaces; (ii) scour‐based interbedded sandstone and siltstone with tractional structures; and (iii) inverse‐graded to normal‐graded siltstone beds. An overlying 55 m thick coarsening‐upward parasequence fills the upper section of the canyon and extends across its interfluves. Younger parasequences display progressively shallower gradients during progradation and healing of the local accommodation. The incision surface resulted from initial oversteepening and high sediment supply triggering deformation and collapse at the shelf edge, enhanced by a relative sea‐level fall that did not result in subaerial exposure of the shelf edge. Previous work identified an underlying highly incised, sandstone‐rich shelf‐edge rollover zone across‐margin strike, suggesting that there was migration in the zone of shelf edge to upper‐slope incision over time. This study provides an unusual example of clinothem degradation and readjustment with three‐dimensional control in an exhumed basin‐margin succession. The work demonstrates that large‐scale erosion surfaces can develop and migrate due to a combination of factors at the shelf‐edge rollover zone and proposes additional criteria to predict clinothem incision and differential sediment bypass in consistently progradational systems.  相似文献   

2.
Depositional models that use heterogeneity in mud‐dominated successions to distinguish and diagnose environments within the offshore realm are still in their infancy, despite significant recent advances in understanding the complex and dynamic processes of mud deposition. Six cored intervals of the main body of the Mancos Shale, the lower Blue Gate Member, Uinta Basin, were examined sedimentologically, stratigraphically and geochemically in order to evaluate facies heterogeneity and depositional mechanisms. Unique sedimentological and geochemical features are used to identify three offshore environments of deposition: the prodelta, the mudbelt and the sediment‐starved shelf. Prodelta deposits consist of interlaminated siltstone and sandstone and exhibit variable and stressed trace fossil assemblages, and indicators of high sedimentation rates. The prodelta was dominated by river‐fed hyperpycnal flow. Mudbelt deposits consist of interlaminated siltstone and sandstone and are characterized by higher bioturbation indices and more diverse trace fossil assemblages. Ripples, scours, truncations and normally graded laminations are abundant in prodelta and mudbelt deposits indicating dynamic current conditions. Mudbelt sediment dispersal was achieved by both combined flow above storm wave base and current‐enhanced and wave‐enhanced sediment gravity flows below storm wave base. Sediment‐starved shelf deposits are dominantly siltstone to claystone with the highest calcite and organic content. Bioturbation is limited to absent. Sediment‐starved shelf deposits were the result of a combination of shelfal currents and hypopycnal settling of sediment. Despite representing the smallest volume, sediment‐starved shelf deposits are the most prospective for shale hydrocarbon resource development, due to elevated organic and carbonate content. Sediment‐starved shelf deposits are found in either retrogradational to aggradational parasequence sets or early distal aggradational to progradational parasequence sets, bounding the maximum flooding surface. An improved framework classification of offshore mudstone depositional processes based on diagnostic sedimentary criteria advances our predictive ability in complex and dynamic mud‐dominated environments and informs resource prospectivity.  相似文献   

3.
TThe Roper Group is a cyclic, predominantly marine, siliciclastic succession of Calymmian (Early Mesoproterozoic) age. It has a distribution of at least 145 000 km2 and a maximum known thickness of ～5000 m. In the Roper River district the middle part of the Roper Group (～1300 m thick) is characterised by the cyclical alternation of mudstone and sandstone units, and can be divided into six third‐order depositional sequences. A typical sequence is broadly progradational in aspect, and comprises a lower, mudstone‐rich, storm‐dominated shelf succession (up to 330 m thick), and a sequence‐capping unit dominated by tidal‐platform cross‐bedded sandstone (up to 80 m thick); both are interpreted as highstand systems tracts. Transgressive strata are poorly represented but where present are characterised by paralic to fluvial redbed assemblages that include ooidal ironstone. Roper Group sequences lack a distinct condensed section and sequence boundaries are mostly conformable. Erosional contacts separate mud‐rich shelf facies from sequence‐capping sandstones. We infer that these erosion surfaces were generated by episodic flexural tectonism, which also generated the accommodation and sediment supply for Roper sequences.  相似文献   

4.
A. Guy Plint 《Sedimentology》2014,61(3):609-647
Determining sediment transport direction in ancient mudrocks is difficult. In order to determine both process and direction of mud transport, a portion of a well‐mapped Cretaceous delta system was studied. Oriented samples from outcrop represent prodelta environments from ca 10 to 120 km offshore. Oriented thin sections of mudstone, cut in three planes, allowed bed microstructure and palaeoflow directions to be determined. Clay mineral platelets are packaged in equant, face‐face aggregates 2 to 5 μm in diameter that have a random orientation; these aggregates may have formed through flocculation in fluid mud. Cohesive mud was eroded by storms to make intraclastic aggregates 5 to 20 μm in diameter. Mudstone beds are millimetre‐scale, and four microfacies are recognized: Well‐sorted siltstone forms millimetre‐scale combined‐flow ripples overlying scoured surfaces; deposition was from turbulent combined flow. Silt‐streaked claystone comprises parallel, sub‐millimetre laminae of siliceous silt and clay aggregates sorted by shear in the boundary layer beneath a wave‐supported gravity flow of fluid mud. Silty claystone comprises fine siliceous silt grains floating in a matrix of clay and was deposited by vertical settling as fluid mud gelled under minimal current shear. Homogeneous clay‐rich mudstone has little silt and may represent late‐stage settling of fluid mud, or settling from wave‐dissipated fluid mud. It is difficult or impossible to correlate millimetre‐scale beds between thin sections from the same sample, spaced only ca 20 mm apart, due to lateral facies change and localized scour and fill. Combined‐flow ripples in siltstone show strong preferred migration directly down the regional prodelta slope, estimated at ca 1 : 1000. Ripple migration was effected by drag exerted by an overlying layer of downslope‐flowing, wave‐supported fluid mud. In the upper part of the studied section, centimetre‐scale interbeds of very fine to fine‐grained sandstone show wave ripple crests trending shore normal, whereas combined‐flow ripples migrated obliquely alongshore and offshore. Storm winds blowing from the north‐east drove shore‐oblique geostrophic sand transport whereas simultaneously, wave‐supported flows of fluid mud travelled downslope under the influence of gravity. Effective wave base for sand, estimated at ca 40 m, intersected the prodelta surface ca 80 km offshore whereas wave base for mud was at ca 70 m and lay ca 120 km offshore. Small‐scale bioturbation of mud beds co‐occurs with interbedded sandstone but stratigraphically lower, sand‐free mudstone has few or no signs of benthic fauna. It is likely that a combination of soupground substrate, frequent storm emplacement of fluid mud, low nutrient availability and possibly reduced bottom‐water oxygen content collectively inhibited benthic fauna in the distal prodelta.  相似文献   

5.
  相似文献   

6.
The Sierra Grande Formation (Silurian-Early Devonian) consists of quartz arenites associated with clast supported conglomerates, mudstones, shales and ironstones. Eight sedimentary facies are recognized: cross-stratified and massive sandstone, plane bedded sandstone, ripple laminated sandstone, interstratified sandstone and mudstone, laminated mudstone and shale, oolitic ironstone, massive conglomerate and sheet conglomerate lags. These facies are interpreted as shallow marine deposits, ranging from foreshore to inner platform environments. Facies associations, based on vertical relationships among lithofacies, suggest several depositional zones: (a) beach to upper shoreface, with abundant plane bedded and massive bioturbated sandstones; (b) upper shoreface to breaker zone, characterized by multistorey cross-stratified and massive sandstone bodies interpreted as subtidal longshore-flow induced sand bars; (c) subtidal, nearshore tidal sand bars, consisting of upward fining sandstone sequences; (d) lower shoreface zone, dominated by ripple laminated sandstone, associated with cross-stratified and horizontal laminated sandstone, formed by translatory and oscillatory flows; and (e) transitional nearshore-offshore and inner platform zones, with heterolithic and pelitic successions, and oolitic ironstone horizons. Tidal currents, fair weather waves and storm events interacted during the deposition of the Sierra Grande Formation. However, the relevant features of the siliciclastics suggest that fair weather and storm waves were the most important mechanisms in sediment accumulation. The Silurian-Lower Devonian platform was part of a continental interior sag located between southern South America and southern Africa. The Sierra Grande Formation was deposited during a second order sea level rise, in which a shallow epeiric sea flooded a deeply weathered low relief continent.  相似文献   

7.
The Otekura Formation (Early Jurassic, Pseudaucella zone) at Sandy Bay comprises part of a 10+ km thick, regressive, forearc shelf and slope sequence, the Hokonui facies belt of the Rangitata Geosyncline. The Otekura Formation is dominantly fine grained, being mostly mudstone, silty mudstone and siltstone. The sediments are volcanogenic throughout. The upper 150 m of the formation contains two 20 m thick, channelized bodies of medium-thick bedded sandy flysch, each associated with thin bedded muddy flysch interpreted as overbank turbidites. Directional indicators within the channel sequence indicate emplacement from the south-southwest. In contrast, rare turbidites that occur below the channel sequence, within the background mudstone sediment, were emplaced from the east, i.e. at right angles to the channelized flows. The immediately overlying Omaru Formation contains more abundant macrofossils, intraclastic conglomerates, and appreciable amounts of traction-emplaced cross-bedded sand. Bioturbated calcareous siltstones with an in situ molluscan fauna follow (Boatlanding Formation), and are of shelf origin. The Omaru Formation is therefore interpreted as a shelf-slope break deposit, and the Otekura Formation as an upper slope facies. Reconnaissance studies indicate that the Otekura Formation is underlain by several kilometres of dominantly fine grained, deep water slope sediments, containing occasional sand and conglomerate filled channels similar to those here described in detail from the Otekura Formation. Such channels are inferred to form when a mass-transported sand, derived from failure higher on the slope, ploughs erosively into the sea floor. After their incision, the channels served for a short time as conduits for downslope transport of sediment, the redeposited deposits of which are found filling each channel. Both channel fills at Sandy Bay are capped by thin-bedded turbidites inferred to have overspilled from similar channels nearby on the slope.  相似文献   

8.
The Miocene to Modern Baram Delta Province is a highly efficient source to sink system that has accumulated 9 to 12 km of coastal–deltaic to shelf sediments over the past 15 Myr. Facies analysis based on ca 1 km of total vertical outcrop stratigraphy, combined with subsurface geology and sedimentary processes in the present‐day Baram Delta Province, suggests a ‘storm‐flood’ depositional model comprising two distinct periods: (i) fair‐weather periods are dominated by alongshore sediment reworking and coastal sand accumulation; and (ii) monsoon‐driven storm periods are characterized by increased wave‐energy and offshore‐directed downwelling storm flow that occur simultaneously with peak fluvial discharge caused by storm precipitation (‘storm‐floods’). The modern equivalent environment has the following characteristics: (i) humid‐tropical monsoonal climate; (ii) narrow (ca <100 km) and steep (ca 1°), densely vegetated, coastal plain; (iii) deep tropical weathering of a mudstone‐dominated hinterland; (iv) multiple independent, small to moderate‐sized (102 to 105 km2) drainage basins; (v) predominance of river‐mouth bypassing; and (vi) supply‐dominated shelf. The ancient, proximal part of this system (the onshore Belait Formation) is dominated by strongly cyclical sandier‐upward successions (metre to decametre‐scale) comprising (from bottom to top): (i) finely laminated mudstone with millimetre‐scale silty laminae; (ii) heterolithic sandstone–mudstone alternations (centimetre to metre‐scale); and (iii) sharp‐based, swaley cross‐stratified sandstone beds and bedsets (metre to decimetre‐scale). Gutter casts (decimetre to metre‐scale) are widespread, they are filled with swaley cross‐stratified sandstone and their long axes are oriented perpendicular to the palaeo‐shoreline. The gutter casts and other associated waning‐flow event beds suggest that erosion and deposition was controlled by high‐energy, offshore‐directed, oscillatory‐dominated, sediment‐laden combined flows within a shoreface to delta front setting. The presence of multiple river mouths and exceptionally high rates of accommodation creation (characteristic of the Neogene to Recent Baram Delta Province; up to 3000 m Ma−1), in a ‘storm‐flood’‐dominated environment, resulted in a highly efficient and effective offshore‐directed sediment transport system.  相似文献   

9.
The Kaskapau and Cardium Formations span Late Cenomanian to Early Coniacian time and were deposited on a low‐gradient foredeep ramp. The studied portion of the Kaskapau Formation spans ca 3·5 Myr and forms a mudstone‐dominated wedge thinning from 700 to <50 m from SW to NE over ca 300 km. In contrast, the Cardium Formation spans about 2·1 Myr, is about 100 m thick, sandstone‐rich and broadly tabular. The Kaskapau and Cardium Formations are divided, respectively, into 28 and nine allomembers, each bounded by marine flooding surfaces. Kaskapau allomembers 1 to 7 show about 200 km of offlap from the forebulge, accompanied by progradation of thin sandstones from the eroded forebulge crest. In contrast, Kaskapau allomembers 8 to 28 and Cardium allomembers C1 to C9 show overall onlap onto the forebulge of about 350 km, and contain no forebulge‐derived sandstones. This broad pattern is interpreted as recording a latest Cenomanian pulse of tectonic loading which led to shoreline back‐step in the proximal foredeep and coeval uplift of the forebulge, leading to erosion. The advance of the sediment wedge after Kaskapau allomember 7 is attributed primarily to the isostatic effect of a distributed sediment load; the advance of the orogenic wedge had a subordinate effect on subsidence of the forebulge. For Kaskapau allomembers 1 to 6, isopachs trend north to south, suggesting a load directly to the west; allomembers 7 to 28 show an abrupt rotation of isopachs to NW–SE, suggesting that the load shifted several hundred kilometres to the south. This re‐orientation might be related to a change from an approximately orthogonal to a dextral transpressive stress regime. Within the longer‐term offlap–onlap cycle recorded by the Kaskapau and Cardium Formations, individual allomembers are grouped into packages reflecting higher‐frequency onlap–offlap cycles, each spanning ca 0·5 to 0·7 Myr. Offlap from the forebulge tends to be accompanied by more pronounced transgression in the foredeep, whereas onlap onto the forebulge is accompanied by progradation of tongues of shoreface sandstone. This relationship suggests that changes in deformation rate in the orogenic wedge modulated proximal subsidence rate, enhancing or suppressing shoreline progradation, and also causing subtle uplift or subsidence of the forebulge region. Wedge‐shaped allomembers in the Kaskapau Formation contain shoreface sandstone and conglomerate that prograded, respectively, <40 and <25 km from the preserved basin margin; progradation of coarse clastics was limited by rapid flexural subsidence. Tabular allomembers of the Cardium Formation imply a low flexural subsidence rate and contain sandy and conglomeratic shoreface deposits that prograded up to ca 180 km from the preserved basin margin. This relationship suggests that low rates of flexural subsidence promoted steeper alluvial gradients, more vigorous gravel transport and more extensive shoreface progradation. Overall, observed stratal geometry and facies distribution is explained readily in terms of current elastic flexural models. Most shoreface sandstones in the proximal foredeep show evidence of forced regression. Eustasy provides the most plausible explanation for relative sea‐level rise–fall cycles on the 125 kyr allomember timescale. Geometric relationships suggest eustatic oscillations of about 10 m. Forced regressive shoreface development was suppressed during Kaskapau allomembers 1 to 10 when the rate of flexural subsidence was at its highest.  相似文献   

10.
Although facies models of braided, meandering and anastomosing rivers have provided the cornerstones of fluvial sedimentology for several decades, the depositional processes and external controls on sheetflow fluvial systems remain poorly understood. Sheetflow fluvial systems represent a volumetrically significant part of the non‐marine sedimentary record and documented here are the lithofacies, depositional processes and possible roles of rapid subsidence and arid climate in generating a sheetflow‐dominated fluvial system in the Cenozoic hinterland of the central Andes. A 6500 m thick succession comprising the Late Eocene–Oligocene Potoco Formation is exposed continuously for >100 km along the eastern limb of the Corque syncline in the high Altiplano plateau of Bolivia. Fluvial sandstone and mudstone units were deposited over an extensive region (>10 000 km2) with remarkably few incised channels or stacked‐channel complexes. The Potoco succession provides an exceptional example of rapid production of accommodation sustained over a prolonged period of time in a non‐marine setting (>0·45 mm year−1 for 14 Myr). The lower ≈4000 m of the succession coarsens upward and consists of fine‐grained to medium‐grained sandstone, mudstone and gypsum deposits with palaeocurrent indicators demonstrating eastward transport. The upper 2500 m also coarsens upward, but contains mostly fine‐grained to medium‐grained sandstone that exhibits westward palaeoflow. Three facies associations were identified from the Potoco Formation and are interpreted to represent different depositional environments in a sheetflow‐dominated system. (i) Playa lake deposits confined to the lower 750 m are composed of interbedded gypsum, gypsiferous mudstone and sandstone. (ii) Floodplain deposits occur throughout the succession and include laterally extensive (>200 m) laminated to massive mudstone and horizontally stratified and ripple cross‐stratified sandstone. Pedogenic alteration and root casts are common. (iii) Poorly confined channel and unconfined sheet sandstone deposits include laterally continuous beds (50 to >200 m) that are defined primarily by horizontally stratified and ripple cross‐stratified sandstone encased in mudstone‐rich floodplain deposits. The ubiquitous thin‐sheet geometry and spatial distribution of individual facies within channel sandstone and floodplain deposits suggest that confined to unconfined, episodic (flash) flood events were the primary mode of deposition. The laterally extensive deposition and possible distributary nature of this sheetflow‐dominated system are attributed to fluvial fan conditions in an arid to semi‐arid, possibly seasonal, environment. High rates of sediment accumulation and tectonic subsidence during early Andean orogenesis may have favoured the development and long‐term maintenance of a sheetflow system rather than a braided, meandering or anastomosing fluvial style. It is suggested here that rapidly produced accommodation space and a relatively arid, seasonal climate are critical conditions promoting the generation of sheetflow‐dominated fluvial systems.  相似文献   

11.
Depositional slope systems along continental margins contain a record of sediment transfer from shallow‐water to deep‐water environments and represent an important area for natural resource exploration. However, well‐preserved outcrops of large‐scale depositional slopes with seismic‐scale exposures and tectonically intact stratigraphy are uncommon. Outcrop characterization of smaller‐scale depositional slope systems (i.e. < 700 m of undecompacted shelf‐to‐basin relief) has led to increased understanding of stratigraphic packaging of prograding slopes. Detailed stacking patterns of facies and sedimentary body architecture for larger‐scale slope systems, however, remain understudied. The Cretaceous Tres Pasos Formation of the Magallanes Basin, southern Chile, presents a unique opportunity to evaluate the stratigraphic evolution of such a slope system from an outcrop perspective. Inherited tectonic relief from a precursor oceanic basin phase created shelf‐to‐basin bathymetry comparable with continental margin systems (～1000 m). Sedimentological and architectural data from the Tres Pasos Formation at Cerro Divisadero reveal a record of continental margin‐scale depositional slope progradation and aggradation. Slope progradation is manifested as a vertical pattern exhibiting increasing amounts of sediment bypass upwards, which is interpreted as reflecting increasing gradient conditions. The well‐exposed, seismic‐scale outcrop is characterized by four 20 to 70 m thick sandstone‐rich successions, separated by mudstone‐rich intervals of comparable thickness (40 to 90 m). Sedimentary body geometry, facies distribution, internal bedding architecture, sandstone richness and degree of amalgamation were analysed in detail across a continuous 2·5 km long transect parallel to depositional dip. Deposition in the lower section (Units 1 and 2) was dominated by poorly channellized to unconfined sand‐laden flows and accumulation of mud‐rich mass transport deposits, which is interpreted as representing a base of slope to lower slope setting. Evidence for channellization and indicators of bypass of coarse‐grained turbidity currents are more common in the upper part of the > 600 m thick succession (Units 3 and 4), which is interpreted as reflecting increased gradient conditions as the system accreted basinward.  相似文献   

12.
The Taveyannaz sandstones of eastern Switzerland are a succession of turbidites found within the Tertiary North Helvetic Flysch system; they represent a portion of the early, underfilled stage of the North Alpine Foreland Basin. The Taveyannaz sandstones were deposited in two sub-basins (Inner and Outer basins) separated by a topographic high trending ENE-WSW (parallel to the subsequent structural strike of the region), interpreted as an emergent thrust tip that propagated into the basin. The southerly Inner basin is therefore considered as a ‘piggy-back’basin comprising a 140 m thick succession dominated by approximately 12 very thick bedded sandstones with thick mudstone caps; these very thick bedded sandstone-mudstone couplets are interpreted as having resulted from the ponding of megaturbidite flows in the topographically confined Inner basin. Intercalated with the very thick bedded sandstones are thin to medium bedded sandstones. The Outer (northerly) basin comprises at least 240 m of turbidites characterized by sandstone packets (5–50 m thick) with extensive amalgamation of beds and a dominantly symmetrical vertical bed thickness and grain size profile. Intercalated between the sandstone packets are laminated graded siltstones and mudstones. The Inner basin sediments underwent localized deformation on the sea floor, generating an irregular surface topography which was then capped by a mud sheet emplaced by superficial sliding. During the emplacement of the mud sheet, large sandstone blocks (up to 130 m across) were incorporated from the underlying succession. The resultant geometry of the upper surface of the Inner basin sandstones exhibits vertical walls which truncate, and are perpendicular to, the underlying beds. The depositional style and structural control of the Taveyannaz sandstones, in association with the emplacement of superficial mud sheets, reflect processes that are highly analogous to those occurring in modern accretionary wedge environments. The sandstone packets of the Outer basin reflect a cyclical pattern of sedimentation alternating between deposition of sandstones and mudstones. The autocyclical or allocyclical controls on these high frequency alternations are difficult to interpret; likely mechanisms include lobe switching, climatic variations, eustatic sea level fluctuations and changes of horizontal in-plane deviatoric stress on the lithosphere. In this example, an alternative mechanism is speculated upon. This is based on the analogy with accretionary wedge processes. In this hypothesis, it is proposed that high frequency fluctuations in the accommodation space available on the shelf may result from fluctuations in the topographic slope of an accretionary wedge around its critical taper. Hence, during periods of accelerated frontal accretion, the taper angle of the thrust wedge becomes subcritical resulting in a broad, low angle topographic slope and increased shelfal accommodation. Consequently, sediment becomes trapped in a relatively landward position. The necessary rejuvenation of the surface slope of the thrust wedge to a critical taper is achieved through internal reactivation resulting in tectonic uplift and hence a relative fall in sea level; this leads to the reworking of sediment to the base of slope or outer trench. Repeated alternations of relative sea level between a subcritical highstand and a supercritical lowstand are considered to be sufficient to generate the observed alternations between sandstone and mudstone packages in the turbidite basin.  相似文献   

13.
Although the Permian–Triassic Semanggol Formation is widely distributed in northwestern Peninsula Malaysia and is made of various lithofacies, its sedimentology and possible relation with the Permian–Triassic boundary (PTB) were not considered before. In this study, detailed facies analysis was conducted for two sections of the Semanggol Formation at the Bukit Kukus and Baling areas, South Kedah to clarify its sedimentology and relation to the PTB. Four facies from the Permian part of the Semanggol Formation that were identified at the Bukit Kukus section include laminated black mudstone, interbedded mudstone and sandstone, volcanogenic sediments, and bedded chert. In Baling area, the Triassic part of the formation is classified into three members. The lower member comprises of claystone and bedded chert facies, while the middle member is composed of sandstone and claystone interbeds (rhythmite). On the other hand, the upper member is grouped into two main units. The lower unit is mainly claystone and includes two facies: the varve-like laminated silt and clay and massive black claystone. The upper unit is composed of various sandstone lithofacies ranging from hummocky cross stratified (HCS) sandstone to thinly laminated sandstone to burrowed sandstone facies. The HCS sandstones occur as two units of fine-grained poorly sorted sandstone with clay lenses as flaser structure and are separated by a hard iron crust. They also show coarse grains of lag deposits at their bases. The laminated black mudstone at the lowermost part of the Semanggol Formation represents a reducing and quite conditions, which is most probably below the fairweather wave base in offshore environment that changed upwards into a fining upward sequence of tide environment. Abundance of chert beds in the volcanogenic sediments suggests the deposition of tuffs and volcanic ashes in deep marine setting which continues to form the Permian pelagic bedded chert and claystone. The bedded chert in the lower member of the Triassic section suggests its formation in deep marine conditions. The rhythmic sandstone and claystone interbeds of the middle member are suggestive for its formation as a distal fan of a turbidite sequence. Lithology and primary sedimentary structure of the upper member suggest its deposition in environments range from deep marine represented by the varve-like laminated silt and clay to subtidal environment corresponds to the massive black claystone to coastal environment represented by the hummocky sandstone units and reaches the maximum regression at the hiatus surface. Another cycle of transgression can be indicated from the second hummocky unit with transgressive lag deposits that develops to relatively deeper conditions as indicated from the formation of relatively thick laminated sandstone and bioturbated massive sandstone facies that represent tidal and subtidal environment, respectively. Late Permian lithological variation from the radiolarian chert into early Triassic claystone probably resulted from a decrease in productivity of radiolarians and might represent a PTB in the Semanggol Formation. Volcanogenic sediments in the studied section can be used as an evidence for volcanic activities at the end of the Permian, which is probably connected to the nearby volcanic ash layers in the eastern China, the ultimate cause of the PTB in this area. Black mudstone in the Permian part of the studied section may be interrelated to the Latest Permian Anoxia that started to build in the deep ocean well before the event on shallow shelves.  相似文献   

14.
A balance between primary production, rates of sediment accumulation or dilution, and biological or diagenetic destruction has long been considered a key control on organic carbon preservation in modern offshore marine environments. Additionally, current understanding of sediment transport processes in offshore environments has advanced in the last decade to include variable energy and dynamic mechanisms, requiring a re‐evaluation of ancient deposits in these systems. The Juana Lopez Member of the Mancos Shale preserves organic carbon‐rich mudstone interbedded and interlaminated with sandstone that records high energy traction flow conditions. Core, outcrop and geochemical data from the Juana Lopez Member were used to elucidate sediment provenance and processes controlling organic carbon preservation and distribution in this mudstone‐dominated system. Five dominant lithofacies with varying grain size, sedimentary fabrics, composition and grain origins were differentiated and were deposited in three main environments: the prodelta, fringe zone and low angle offshore ramp. Basal deposits of the Juana Lopez Member consist of siliceous sandstone‐dominated, heterolithic deposits with characteristic sedimentary structures (for example, current ripples and normal grading) that indicate offshore‐directed underflows, or hyperpycnites, delivered from the updip Ferron/Frontier deltaic system. In the upper portion of the Juana Lopez Member, a compositional change to biogenic carbonate‐rich sandstone and mudstone is interpreted to be as a result of increased accommodation in central Utah (USA), associated base‐level rise and shoreline‐parallel sediment transport. Non‐parallel laminated, organic carbon‐rich mudstone is preserved throughout the Juana Lopez Member. Depositional fabrics and trace element signatures suggest that these deposits are the result of dynamic conditions at the sea floor and in the oxic to suboxic water column, further challenging the notion that organic‐bearing mudstone is deposited solely through suspension settling in anoxic waters. Punctuated delivery of organic carbon laden sediment from mixed terrestrial and marine sources resulted in an event‐bed style of organic carbon deposition and preservation.  相似文献   

15.
《Sedimentology》2018,65(5):1447-1481
  相似文献   

16.
The dominance of isotropic hummocky cross‐stratification, recording deposition solely by oscillatory flows, in many ancient storm‐dominated shoreface–shelf successions is enigmatic. Based on conventional sedimentological investigations, this study shows that storm deposits in three different and stratigraphically separated siliciclastic sediment wedges within the Lower Cretaceous succession in Svalbard record various depositional processes and principally contrasting sequence stratigraphic architectures. The lower wedge is characterized by low, but comparatively steeper, depositional dips than the middle and upper wedges, and records a change from storm‐dominated offshore transition – lower shoreface to storm‐dominated prodelta – distal delta front deposits. The occurrence of anisotropic hummocky cross‐stratification sandstone beds, scour‐and‐fill features of possible hyperpycnal‐flow origin, and wave‐modified turbidites within this part of the wedge suggests that the proximity to a fluvio‐deltaic system influenced the observed storm‐bed variability. The mudstone‐dominated part of the lower wedge records offshore shelf deposition below storm‐wave base. In the middle wedge, scours, gutter casts and anisotropic hummocky cross‐stratified storm beds occur in inferred distal settings in association with bathymetric steps situated across the platform break of retrogradationally stacked parasequences. These steps gave rise to localized, steeper‐gradient depositional dips which promoted the generation of basinward‐directed flows that occasionally scoured into the underlying seafloor. Storm‐wave and tidal current interaction promoted the development and migration of large‐scale, compound bedforms and smaller‐scale hummocky bedforms preserved as anisotropic hummocky cross‐stratification. The upper wedge consists of thick, seaward‐stepping successions of isotropic hummocky cross‐stratification‐bearing sandstone beds attributed to progradation across a shallow, gently dipping ramp‐type shelf. The associated distal facies are characterized by abundant lenticular, wave ripple cross‐laminated sandstone, suggesting that the basin floor was predominantly positioned above, but near, storm‐wave base. Consequently, shelf morphology and physiography, and the nature of the feeder system (for example, proximity to deltaic systems) are inferred to exert some control on storm‐bed variability and the resulting stratigraphic architecture.  相似文献   

17.
Regional mapping of Middle Albian, shallow‐marine clastic strata over ca 100 000 km2 of the Western Canada Foreland Basin was undertaken to investigate the relationship between large‐scale stratal architecture and lithology. Results suggest that, over ca 5 Myr, stratal geometry and facies were dynamically linked to tectonic activity in the adjacent Cordillera. Higher frequency modulation of accommodation is most reasonably ascribed to eustasy. The Harmon and Cadotte alloformations were deposited at the southern end of an embayment of the Arctic Ocean. The Harmon alloformation, forming the lower part of the succession, constitutes a wedge of marine mudstone that thickens westward over 400 km from <5 m near the forebulge to >150 m in the foredeep. Constituent allomembers are also wedge‐shaped but lack distinct clinothems, a rollover point or downlapping geometry. Ubiquitous wave ripples indicate that the sea floor lay above storm wave base. Deposition took place on an extremely low‐gradient ramp, where accommodation was limited by effective wave base. Lobate, river‐dominated deltas fringed the southern margin of the basin. The largest deltas are stacked in the same area, suggesting protracted stability of the feeder river. A buried palaeo‐valley on the underlying sub‐Cretaceous unconformity may have influenced compaction and controlled river location for ca 3 Myr. Adjacent to the western Cordillera, a predominantly mudstone succession is interbedded with abundant storm beds of very fine‐grained sandstone and siltstone that reflect supply from the adjacent orogen. Bioturbation indices in the Harmon alloformation range from zero to six which reflects the influence of stressors related to river‐mouth proximity. Harmon alloformation mudstone grades abruptly upward into marine sandstone and conglomerate of the overlying Cadotte alloformation. The Cadotte is composed of three allomembers ‘CA’ to ‘CC’, that represent the deposits of prograding strandplains 200 × 300 km in extent. Allomembers ‘CA’ and ‘CB’ are strongly sandstone‐dominated, whereas allomember ‘CC’ contains abundant conglomerate in the west. The dominantly aggradational wedge of Harmon alloformation mudstone records flexural subsidence driven by active thickening in the adjacent orogen: the high accommodation rate trapped coarser clastic detritus close to the basin margin. In contrast, the tabular, highly progradational sandstone and conglomerate bodies of the Cadotte alloformation record a low subsidence rate, implying tectonic quiescence in the adjacent orogen. Erosional unloading of the orogen through Cadotte time steepened rivers to the extent that they delivered gravel to the shore. These observations support an ‘anti‐tectonic’ model of gravel supply proposed previously for the United States portion of the Cretaceous foreland basin. Because Cadotte allomembers do not thicken appreciably into the foredeep, accommodation changes that controlled these transgressive–regressive successions were probably of eustatic origin.  相似文献   

18.
Stacked shallow marine cycles in the Lower Ordovician, Bell Island Group, of Bell Island, Newfoundland, show upward thickening and upward coarsening sequences which were deposited on a storm-affected shelf. In the Beach Formation each cycle has a facies sequence comprised, from base to top, of dark grey mudstones, light grey mudstones, tabular sandstones and mudstones, lenticular sandstones and mudstones, and thick bedded lenticular sandstones, reflecting a progressive increase of wave orbital velocities at the sediment surface. The mudstones and tabular sandstones reflect an environment in which the sea floor lay in the lower part of the wave orbital velocity field and in which tempestites were deposited as widespread sheets from weak combined flow currents. The lenticular sandstones in the succeeding facies are wave reworked sands, commonly lying in erosional hollows and having erosional tops and internal hummocky cross-stratification. Planar lamination is relatively uncommon and sole marks are mainly absent. In this facies oscillatory currents were dominant and accumulated sand in patches generally 10–30 m in diameter. The facies formed on the inner shelf where the oscillatory currents generated by storm waves had powerful erosional effects and also determined the depositional bedforms. Mud partings and second-order set boundaries within sandstone beds are believed to separate the products of individual storms so that many lenticular sandstone beds represent the amalgamation of several event beds. This interpretation has important implications for attempts to estimate event frequency by counting sandstone beds within a sequence and for estimates of sand budgets during storm events. The thick bedded lenticular facies appears to have been formed by erosion of the mud beds between the lenticular sands, leading to nearly complete amalgamation of several lenticular sand bodies except for residual mud partings. In the overlying Redmans Formation the process of amalgamation progressed even further so that nearly all the mud partings were removed, resulting in the formation of thick bedded tabular sandstones. Sequence stratigraphic analysis of the cyclical sequence suggests that the cycles were eustatically controlled. The rising limb of the sea level curve produced only the dark grey mudstone part of the cycle while the remainder of the cycle was deposited on the falling limb. There is a gradational but rapid facies transition from the tabular to the lenticular sandstone facies which is interpreted as occurring at the inflexion point on the falling limb. The thick bedded facies of the Beach Formation and the thick bedded tabular facies of the Redmans Formation represent periods of maximum sea level fall. The stacked cycles in the Beach Formation are interpreted as an aggradational, high frequency sequence or parasequence set bounded at the top by a sequence boundary and succeeded by the three aggradational parasequences of the Redmans Formation. The recognition of storm facies with sandstone beds of very different bed length has important implications for the reservoir modelling of such facies.  相似文献   

19.
The Lower Permian Wasp Head Formation (early to middle Sakmarian) is a ～95 m thick unit that was deposited during the transition to a non‐glacial period following the late Asselian to early Sakmarian glacial event in eastern Australia. This shallow marine, sandstone‐dominated unit can be subdivided into six facies associations. (i) The marine sediment gravity flow facies association consists of breccias and conglomerates deposited in upper shoreface water depths. (ii) Upper shoreface deposits consist of cross‐stratified, conglomeratic sandstones with an impoverished expression of the Skolithos Ichnofacies. (iii) Middle shoreface deposits consist of hummocky cross‐stratified sandstones with a trace fossil assemblage that represents the Skolithos Ichnofacies. (iv) Lower shoreface deposits are similar to middle shoreface deposits, but contain more pervasive bioturbation and a distal expression of the Skolithos Ichnofacies to a proximal expression of the Cruziana Ichnofacies. (v) Delta‐influenced, lower shoreface‐offshore transition deposits are distinguished by sparsely bioturbated carbonaceous mudstone drapes within a variety of shoreface and offshore deposits. Trace fossil assemblages represent distal expressions of the Skolithos Ichnofacies to stressed, proximal expressions of the Cruziana Ichnofacies. Impoverished trace fossil assemblages record variable and episodic environmental stresses possibly caused by fluctuations in sedimentation rates, substrate consistencies, salinity, oxygen levels, turbidity and other physio‐chemical stresses characteristic of deltaic conditions. (vi) The offshore transition‐offshore facies association consists of mudstone and admixed sandstone and mudstone with pervasive bioturbation and an archetypal to distal expression of the Cruziana Ichnofacies. The lowermost ～50 m of the formation consists of a single deepening upward cycle formed as the basin transitioned from glacioisostatic rebound following the Asselian to early Sakmarian glacial to a regime dominated by regional extensional subsidence without significant glacial influence. The upper ～45 m of the formation can be subdivided into three shallowing upward cycles (parasequences) that formed in the aftermath of rapid, possibly glacioeustatic, rises in relative sea‐level or due to autocyclic progradation patterns. The shift to a parasequence‐dominated architecture and progressive decrease in ice‐rafted debris upwards through the succession records the release from glacioisostatic rebound and amelioration of climate that accompanied the transition to broadly non‐glacial conditions.  相似文献   

20.
Pliocene age deposits of the palaeo‐Orinoco Delta are evaluated in the Mayaro Formation, which crops out along the western margin of the Columbus Basin in south‐east Trinidad. This sandstone‐dominated interval records the diachronous, basinwards migration of the shelf edge of the palaeo‐Orinoco Delta, as it prograded eastwards during the Pliocene–Pleistocene (ca 3·5 Ma). The basin setting was characterized by exceptionally high rates of growth‐fault controlled sediment supply and accommodation space creation resulting in a gross basin‐fill of around 12 km, with some of the highest subsidence rates in the world (ca 5 to 10 m ka?1). This analysis demonstrates that the Mayaro Formation was deposited within large and mainly wave‐influenced shelf‐edge deltas. These are manifested as multiple stacks of coarsening upward parasequences at scales ranging from tens to hundreds of metres in thickness, which are dominated by storm‐influenced and wave‐influenced proximal delta‐front sandstones with extensive, amalgamated swaley and hummocky cross‐stratification. These proximal delta‐front successions pass gradationally downwards into 10s to 100 m thick distal delta front to mud‐dominated upper slope deposits characterized by a wide variety of sedimentary processes, including distal river flood and storm‐related currents, slumps and other gravity flows. Isolated and subordinate sandstone bodies occur as gully fills, while extensive soft sediment deformation attests to the high sedimentation rates along a slope within a tectonically active basin. The vertical stratigraphic organization of the facies associations, together with the often cryptic nature of parasequence stacking patterns and sequence stratigraphic surfaces, are the combined product of the rapid rates of accommodation space creation, high rates of sediment supply and glacio‐eustasy in the 40 to 100 Ka Milankovitch frequency range. The stratigraphic framework described herein contrasts strikingly with that described from passive continental margins, but compares favourably to other tectonically active, deltaic settings (for example, the Baram Delta Province of north‐west Borneo).  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号