首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 125 毫秒
1.
Shelf‐edge deltas record the potential magnitude of sediment delivery from shallow water shelf into deep water slope and basin floor and, if un‐incised, represent the main increment of shelf‐margin growth into the basin, for that period. The three‐dimensional complexity of shelf‐edge delta systems and along‐strike variability at the shelf edge in particular, remains understudied. The Permian–Triassic Kookfontein Formation of the Tanqua Karoo Basin, South Africa, offers extensive three‐dimensional exposure (>100 km2) and therefore a unique opportunity to evaluate shelf‐edge strata from an outcrop perspective. Analysis of stratal geometry and facies distribution from 52 measured and correlated stratigraphic sections show the following: (i) In outer‐shelf areas, parasequences are characterized by undeformed, river‐dominated, storm‐wave influenced delta mouth‐bar sandstones interbedded with packages showing evidence of syn‐depositional deformation. The amount and intensity of soft‐sediment deformation increases significantly towards the shelf edge where slump units and debris flows sourced from collapsed mouth‐bar packages transport material down slope. (ii) On the upper slope, mouth‐bar and delta‐front sandstones pinch out within 2 km of the shelf break and most slump and debris flow units pinch out within 4 km of the shelf break. (iii) Further down the slope, parasequences consist of finer‐grained turbidites, characterized by interbedded, thin tabular siltstones and sandstones. The results highlight that river‐dominated, shelf‐edge deltas transport large volumes of sand to the upper slope, even when major shelf‐edge incisions are absent. In this case, transport to the upper slope through slumping, debris flows and un‐channellized low density turbidites is distributed evenly along strike.  相似文献   

2.
Shelf‐edge deltas are a key depositional environment for accreting sediment onto shelf‐margin clinoforms. The Moruga Formation, part of the palaeo‐Orinoco shelf‐margin sedimentary prism of south‐east Trinidad, provides new insight into the incremental growth of a Pliocene, storm wave‐dominated shelf margin. Relatively little is known about the mechanisms of sand bypass from the shelf‐break area of margins, and in particular from storm wave‐dominated margins which are generally characterized by drifting of sand along strike until meeting a canyon or channel. The studied St. Hilaire Siltstone and Trinity Hill Sandstone succession is 260 m thick and demonstrates a continuous transition from gullied (with turbidites) uppermost slope upward to storm wave‐dominated delta front on the outermost shelf. The basal upper‐slope deposits are dominantly mass‐transport deposited blocks, as well as associated turbidites and debrites with common soft‐sediment‐deformed strata. The overlying uppermost slope succession exhibits a spectacular set of gullies, which are separated by abundant slump‐scar unconformities (tops of rotational slides), then filled with debris‐flow conglomerates and sandy turbidite beds with interbedded mudstones. The top of the study succession, on the outer‐shelf area, contains repeated upward‐coarsening, sandstone‐rich parasequences (2 to 15 m thick) with abundant hummocky and swaley cross‐stratification, clear evidence of storm‐swell and storm wave‐dominated conditions. The observations suggest reconstruction of the unstable shelf margin as follows: (i) the aggradational storm wave‐dominated, shelf‐edge delta front became unstable and collapsed down the slope; (ii) the excavated scars of the shelf margin became gullied, but gradually healed (aggraded) by repeated infilling by debris flows and turbidites, and then new gullying and further infilling; and (iii) a renewed storm wave‐dominated delta‐front prograded out across the healed outer shelf, re‐establishing the newly stabilized shelf margin. The Moruga Formation study, along with only a few others in the literature, confirms the sediment bypass ability of storm wave‐dominated reaches of shelf edges, despite river‐dominated deltas being, by far, the most efficient shelf‐edge regime for sediment bypass at the shelf break.  相似文献   

3.
Shelf‐edge deltas play a critical role in shelf‐margin accretion and deepwater sediment delivery, yet much remains to be understood about the detailed linkage between shelf edge and slope sedimentation. The shelf edge separates the flat‐lying shelf from steeper slope regions, and is observable in seismic data and continuous outcrops; however, it is commonly obscured in non‐continuous outcrops. Defining this zone is essential because it segregates areas dominated by shelf currents from those governed by gravity‐driven processes. Understanding this linkage is paramount for predicting and characterizing associated deepwater reservoirs. In the Tanqua Karoo Basin, the Permian Kookfontein Formation shelf‐slope clinothems are well‐exposed for 21 km along depositional strike and dip. Two independent methods identified the shelf‐edge position, indicating that it is defined by: (i) a transition from predominantly shelf‐current to gravitational deposits; (ii) an increase in soft‐sediment deformation; (iii) a significant gradient increase; and (iv) clinothem thickening. A quantitative approach was used to assess the impact of process‐regime variability along the shelf edge on downslope sedimentation. Facies proportions were quantified from sedimentary logs and photographic panels, and integrated with mapped key surfaces to construct a stratigraphic grid. Spatial variability in facies proportions highlights two types of shelf‐edge depositional zones within the same shelf‐edge delta. Where deposition occurred in fluvial‐dominated zones, the slope is sand rich, channelized with channels widening downslope, and rich in collapse features. Where deltaic deposits indicate considerable tidal reworking, the deposits are thin and pinch‐out close to the shelf edge, and the slope is sand poor and lacks channelization. Amplification of tidal energy, and decrease in fluvial drive on the shelf, coincides with a decrease in mouth bar and shelf‐edge collapse, and a lack of channelization on the slope. This analysis suggests that process‐regime variability along the shelf edge exercised significant control on shelf‐edge progradation, slope channelization and deepwater sediment delivery.  相似文献   

4.
The margin of the Foz do Amazonas Basin saw a shift from predominantly carbonate to siliciclastic sedimentation in the early late Miocene. By this time, the Amazon shelf had also been incised by a canyon that allowed direct influx of sediment to the basin floor, thus confirming that the palaeo‐Amazon fan had already initiated by that time (9.5–8.3 Ma). Above this interval, during a prolonged lowstand, Messinian third‐order sequences are preserved only in the incised‐valley fills of the canyon with no equivalent strata on the shelf. Third‐ and fourth‐order sequences younger than Messinian are preserved on the shelf after sea‐level rise above the shelf by the early Pliocene. Sequences younger than 3.8 Ma often show fourth‐order cyclicity with an average duration of 400 ka (larger scale eccentricity cycles) often preserved in high‐sedimentation‐rate areas of river deltas. Mass wasting and transportation of slope sediments to the basin began to play an important role in sediment dispersal at least as far back as the mid‐Pliocene, after rapid progradation had produced steeper slopes more prone to failure.  相似文献   

5.
The Gulf of Papua inner mid-shelf clinothem and lowstand deposits in Pandora Trough record sediment source and routing through the last sea-level cycle on 20 kyr cycles. Clay mineralogy tracked dispersal of sediment from the two types of rivers (wide versus narrow floodplains) to constrain the contributions of river systems to the Gulf of Papua clinothem and Pandora Trough deposits. Fly River sediment has higher illite:smectite than clays from the small mountainous rivers (Bamu, Turama, Kikori and Purari rivers) that drain regions with more limestones. X-ray diffraction shows high illite:smectite proximal to the Fly River delta that decrease towards the north-east. Downcore mineralogy of inner mid-shelf cores reveals that the largest shifts in illite:smectite correspond to changes in sediment units. The relict clinothem emplaced on the Gulf of Papua shelf during Marine Isotope Stage 3 has lower illite:smectite than the Holocene clinothem that has been building since 2 ka and the Marine Isotope Stage 5a relict clinothem. In the inner mid-shelf, downcore decreases in illite:smectite during Marine Isotope Stage 3 suggest that this region received less clay from the Fly River and more contributions from small mountainous rivers. During Marine Isotope Stage 3, the exposed physiography and narrower shelf in this region may have deflected Fly River sediment more south-eastward, where it bypassed the inner shelf via the Kiwai, Purutu and Umuda valleys and was deposited in the Pandora Trough. The Fly River may have been more susceptible to valley incision because of its limited shelf accommodation and higher ratio of water to sediment discharge. Such bypass of the inner mid-shelf by Fly River sediment during the Marine Isotope Stage 2 sea-level lowstand is recorded in Pandora Trough deposits with high illite:smectite ratios. Inner mid-shelf clinothems with compositional shifts on the order of 20 kyr may be influenced by shelf physiography, accommodation and the variable incision by small and large rivers.  相似文献   

6.
Pliocene age deposits of the palaeo‐Orinoco Delta are evaluated in the Mayaro Formation, which crops out along the western margin of the Columbus Basin in south‐east Trinidad. This sandstone‐dominated interval records the diachronous, basinwards migration of the shelf edge of the palaeo‐Orinoco Delta, as it prograded eastwards during the Pliocene–Pleistocene (ca 3·5 Ma). The basin setting was characterized by exceptionally high rates of growth‐fault controlled sediment supply and accommodation space creation resulting in a gross basin‐fill of around 12 km, with some of the highest subsidence rates in the world (ca 5 to 10 m ka?1). This analysis demonstrates that the Mayaro Formation was deposited within large and mainly wave‐influenced shelf‐edge deltas. These are manifested as multiple stacks of coarsening upward parasequences at scales ranging from tens to hundreds of metres in thickness, which are dominated by storm‐influenced and wave‐influenced proximal delta‐front sandstones with extensive, amalgamated swaley and hummocky cross‐stratification. These proximal delta‐front successions pass gradationally downwards into 10s to 100 m thick distal delta front to mud‐dominated upper slope deposits characterized by a wide variety of sedimentary processes, including distal river flood and storm‐related currents, slumps and other gravity flows. Isolated and subordinate sandstone bodies occur as gully fills, while extensive soft sediment deformation attests to the high sedimentation rates along a slope within a tectonically active basin. The vertical stratigraphic organization of the facies associations, together with the often cryptic nature of parasequence stacking patterns and sequence stratigraphic surfaces, are the combined product of the rapid rates of accommodation space creation, high rates of sediment supply and glacio‐eustasy in the 40 to 100 Ka Milankovitch frequency range. The stratigraphic framework described herein contrasts strikingly with that described from passive continental margins, but compares favourably to other tectonically active, deltaic settings (for example, the Baram Delta Province of north‐west Borneo).  相似文献   

7.
The dominance of isotropic hummocky cross‐stratification, recording deposition solely by oscillatory flows, in many ancient storm‐dominated shoreface–shelf successions is enigmatic. Based on conventional sedimentological investigations, this study shows that storm deposits in three different and stratigraphically separated siliciclastic sediment wedges within the Lower Cretaceous succession in Svalbard record various depositional processes and principally contrasting sequence stratigraphic architectures. The lower wedge is characterized by low, but comparatively steeper, depositional dips than the middle and upper wedges, and records a change from storm‐dominated offshore transition – lower shoreface to storm‐dominated prodelta – distal delta front deposits. The occurrence of anisotropic hummocky cross‐stratification sandstone beds, scour‐and‐fill features of possible hyperpycnal‐flow origin, and wave‐modified turbidites within this part of the wedge suggests that the proximity to a fluvio‐deltaic system influenced the observed storm‐bed variability. The mudstone‐dominated part of the lower wedge records offshore shelf deposition below storm‐wave base. In the middle wedge, scours, gutter casts and anisotropic hummocky cross‐stratified storm beds occur in inferred distal settings in association with bathymetric steps situated across the platform break of retrogradationally stacked parasequences. These steps gave rise to localized, steeper‐gradient depositional dips which promoted the generation of basinward‐directed flows that occasionally scoured into the underlying seafloor. Storm‐wave and tidal current interaction promoted the development and migration of large‐scale, compound bedforms and smaller‐scale hummocky bedforms preserved as anisotropic hummocky cross‐stratification. The upper wedge consists of thick, seaward‐stepping successions of isotropic hummocky cross‐stratification‐bearing sandstone beds attributed to progradation across a shallow, gently dipping ramp‐type shelf. The associated distal facies are characterized by abundant lenticular, wave ripple cross‐laminated sandstone, suggesting that the basin floor was predominantly positioned above, but near, storm‐wave base. Consequently, shelf morphology and physiography, and the nature of the feeder system (for example, proximity to deltaic systems) are inferred to exert some control on storm‐bed variability and the resulting stratigraphic architecture.  相似文献   

8.
The Upper Cretaceous Cerro Toro Formation in the Silla Syncline, Parque Nacional Torres del Paine, Magallanes Basin, Chile, includes over 1100 m of mainly thin‐bedded mud‐rich turbidites containing three thick divisions of coarse conglomerate and sandstone. Facies distributions, stacking patterns and lateral relationships indicate that the coarse‐grained sandstone and conglomerate units represent the fill of a series of large south to south‐east trending deep‐water channels or channel complexes. The middle coarse division, informally named the Paine member, represents the fill of at least three discrete channels or channel complexes, termed Paine A, B and C. The uppermost of these, Paine C, represents a channel belt about 3·5 km wide and its fill displays explicit details of channel geometry, channel margins, and the processes of channel development and evolution. Along its northern margin, Paine C consists of stacked, laterally offset channels, each eroded into fine‐grained mudstone and thin‐bedded sandy turbidites. Along its southern margin, the Paine C complex was bounded by a single, deeply incised but stepped erosional surface. The evolution of the Paine C channel occurred through multiple cycles of activity, each involving: (i) an initial period of channel erosion into underlying fine‐grained sediments; (ii) deposition of coarse‐grained pebble to cobble conglomerate and sandstone within the channel; and (iii) waning of coarse sediment deposition and accumulation of a widespread sheet of fine‐grained, thin‐bedded turbidites inside and outside the channel. The thin‐bedded turbidites deposited within, and adjacent to, the channel along the northern margin of the Paine C complex do not appear to represent levée deposits but, rather, a separate fine‐grained turbidite system that impinged on the Paine C channel from the north. The Cerro Toro channel complex in the Silla Syncline may mark either an early axial zone of the Magallanes Basin or a local slope mini‐basin developed behind a zone of slope faulting and folding now present immediately east of the syncline. If the latter, flows moving downslope toward the basin axis further east were diverted to the south by this developing structural high, deposited part of their coarse sediment loads, and exited the mini‐basin at a point located near the south‐eastern edge of the present Silla Syncline.  相似文献   

9.
Regional mapping of Middle Albian, shallow‐marine clastic strata over ca 100 000 km2 of the Western Canada Foreland Basin was undertaken to investigate the relationship between large‐scale stratal architecture and lithology. Results suggest that, over ca 5 Myr, stratal geometry and facies were dynamically linked to tectonic activity in the adjacent Cordillera. Higher frequency modulation of accommodation is most reasonably ascribed to eustasy. The Harmon and Cadotte alloformations were deposited at the southern end of an embayment of the Arctic Ocean. The Harmon alloformation, forming the lower part of the succession, constitutes a wedge of marine mudstone that thickens westward over 400 km from <5 m near the forebulge to >150 m in the foredeep. Constituent allomembers are also wedge‐shaped but lack distinct clinothems, a rollover point or downlapping geometry. Ubiquitous wave ripples indicate that the sea floor lay above storm wave base. Deposition took place on an extremely low‐gradient ramp, where accommodation was limited by effective wave base. Lobate, river‐dominated deltas fringed the southern margin of the basin. The largest deltas are stacked in the same area, suggesting protracted stability of the feeder river. A buried palaeo‐valley on the underlying sub‐Cretaceous unconformity may have influenced compaction and controlled river location for ca 3 Myr. Adjacent to the western Cordillera, a predominantly mudstone succession is interbedded with abundant storm beds of very fine‐grained sandstone and siltstone that reflect supply from the adjacent orogen. Bioturbation indices in the Harmon alloformation range from zero to six which reflects the influence of stressors related to river‐mouth proximity. Harmon alloformation mudstone grades abruptly upward into marine sandstone and conglomerate of the overlying Cadotte alloformation. The Cadotte is composed of three allomembers ‘CA’ to ‘CC’, that represent the deposits of prograding strandplains 200 × 300 km in extent. Allomembers ‘CA’ and ‘CB’ are strongly sandstone‐dominated, whereas allomember ‘CC’ contains abundant conglomerate in the west. The dominantly aggradational wedge of Harmon alloformation mudstone records flexural subsidence driven by active thickening in the adjacent orogen: the high accommodation rate trapped coarser clastic detritus close to the basin margin. In contrast, the tabular, highly progradational sandstone and conglomerate bodies of the Cadotte alloformation record a low subsidence rate, implying tectonic quiescence in the adjacent orogen. Erosional unloading of the orogen through Cadotte time steepened rivers to the extent that they delivered gravel to the shore. These observations support an ‘anti‐tectonic’ model of gravel supply proposed previously for the United States portion of the Cretaceous foreland basin. Because Cadotte allomembers do not thicken appreciably into the foredeep, accommodation changes that controlled these transgressive–regressive successions were probably of eustatic origin.  相似文献   

10.
Based on high-quality two-dimensional seismic profiles and well data, the seismic reflection characteristics from the late Pliocene and Pleistocene succession of the Qiongdongnan Basin in the South China Sea have been analysed. The result will help in understanding the sedimentological development of slope areas. Twenty coeval clinothems are recognized and four major clinothem types are distinguished. In addition, three types of shelf-edge trajectories are recognized. The various parameters of the clinothems are analysed quantitatively and the relationships between the various clinothem types are studied in combination with the controlling roles. It is concluded that: (i) the shelf-edge trajectories are related to the type of clinothem; (ii) fluctuations in the relative sea level, in combination with variations in sediment supply, result in different clinothem types and geometric parameters; these parameters show interdependencies; (iii) the alternations of progradation and aggradation of clinothems may provide information of the relative sea level and changes in sediment supply; (iv) some lowstand fans could develop at the foot of the slope in the central–eastern part of the basin when the relative sea level started to fall or began to rise. The results of the present study are consequently significant for further quantitative analyses of the characteristics and development of the continental slope, not only in the Qiongdongnan Basin, but also in other basins.  相似文献   

11.
During the Carboniferous Period the Yarrol and New England Orogens comprised an active depositional margin east of cratonised parts of Australia. Patterns of deposition within the orogens were probably controlled by dextral shear systems believed responsible for tectonism and the positions of the various depositional elements (volcanic chain, shelf, slope and basin, pull‐apart troughs and graben), and global changes in sea level. These patterns are illustrated by a series of non‐palin‐spastic palaeogeographic reconstructions.

In the Early Carboniferous, similar patterns of deposition existed within the western volcanic chain, marine shelf, and eastern slope and basin provinces of both orogens. Sediments were deposited in two cycles. They range from volcanic fluvial and marine sandstone to siltstone, mudstone and turbidites. Complex depositional patterns within shelfal regions are shown in detailed palaeogeographic reconstructions.

This uniform pattern changed during the latest Visean and Namurian, with the uplift of the New England Arch, subsidence of a non‐marine graben (Werrie Trough) to the west, and development of a new shelf in the east. The Werrie Trough received volcanics as well as fluvial and glacigene sediments, and the shelf marine sandstone and siltstone. The Yarrol Orogen was unaffected by tectonism but there was a change in provenance.

Late in the Carboniferous the Yarrol Orogen was restructured by the intrusion of granitoids into the former volcanic chain, and development of the Yarrol and North D'Aguilar Troughs as probable pull‐apart basins. In the New England Arch, deformation and metamorphism were followed by intrusion of S‐type granitoids. A comparable episode of deformation and metamorphism affected the southeastern part of the Yarrol Orogen at the end of the Carboniferous Period. This partial cratonisation of the mobile zone was a prelude to widespread basin formation during the Permian Period.  相似文献   

12.
Marine shelf strata of the Quinault Formation reflect the influences of storm–flood processes and convergent margin tectonism on sedimentation and palaeocommunity distributions in an active forearc basin of Early Pliocene age, western Washington, USA. The sedimentologic, ichnologic and invertebrate megafaunal character of coastal sea cliff exposures in the Pratt Cliff–Duck Creek area, Quinault Indian Nation, reveal five different sedimentary facies – scoured, Rosselia, bioturbated, mixed and Acharax. These facies document the shifting interplay and intensities among storms, waves and river‐flood plumes during transgression in inner to mid‐shelf settings. Storm sedimentation on the inner shelf is recorded north of Pratt Cliff by amalgamated, proximal tempestites of the scoured facies, which grade up‐section to thick deposits of hummocky cross‐stratified sandstone, indicative of strong wave influences. These hummocky beds alternate, in metre‐scale packages, with banded mudstone and siltstone that have distinctive sedimentologic and ichnofaunal characteristics (Rosselia facies). In particular the mudstone and siltstone occur as 1–15 cm‐thick, rhythmic, parallel beds that are laterally continuous, internally homogeneous to faintly laminated, and thus similar in nature to fine‐grained, oceanic flood deposits reported from shelf settings offshore the modern Eel River, northern California. The Quinault flood deposits are dominated by the ubiquitous trace fossil Rosselia socialis, comprising vertical, mud‐packed, flaring burrows with a sand‐filled central shaft which has been inferred as the feeding‐dwelling structure of a vermiform invertebrate adapted to high sedimentation rates in inner‐shelf settings. Fairweather conditions in between the higher energy periods of storms, waves and floods are recorded north of Pratt Cliff by the mixed facies, which is interpreted as representing the sand and mud zone of the inner‐ to mid‐shelf transition. Quieter, deeper, mid‐shelf, fairweather settings are typified by the bioturbated facies south of Pratt Cliff, where lower sedimentation rates and lower physical energies produced extensively bioturbated deposits of sandy siltstone punctuated, in places, by isolated sandy beds of distal tempestites. Quinault strata also chronicle stratigraphic signatures of subduction of the Juan de Fuca plate beneath western Washington during the Pliocene. For example, the imprint of geochemically unusual authigenic carbonates and a chemosynthetic palaeocommunity (Acharax facies) have been interpreted as a methane seep on the Quinault seafloor. Furthermore, a mobile rockground epifauna of pholadid bivalves became established on abundant, dark mudstone cobbles and pebbles sourced from the Hoh Assemblage, a Miocene accretionary prism that was actively deforming as well as interacting with Quinault forearc sediments during the Pliocene. Hoh mudstone clasts were supplied to the Quinault shelf via seafloor‐piercing diapirs and eroding mélange shear zones, exposures of which today occur in fault contact with Quinault strata along the coast from Taholah to the Raft River.  相似文献   

13.
The northern Gioia Basin of the south‐east Tyrrhenian Sea is a slope basin, ～ 20 km wide and ～ 50 km long, with a bathymetry of ≤ 1300 m, bounded by the Calabro‐Sicilian landmass and the Aeolian Island Arc. Coarse sediment is supplied from the Calabrian margin, where the shelf is very narrow to non‐existent, whereas the wider shelf on the Sicilian margin prevents supply by storing river‐fed sediments. The basin is dominated by the Gioia–Mesima canyon/channel system paralleled by a tongue‐shaped depositional lobe. Multibeam bathymetric surveys, sea floor reflectivity data and airgun seismic profiles reveal the recent evolution of the submarine system. Slope canyons and basin‐floor levéed channels formed where major rivers built deltas at the shelfless Calabrian margin and strong hyperpycnal flows predominated. The channels are a few hundred metres wide and a few tens of metres deep, with a downslope change from a straight to meandering pattern where the slope gradient decreases from 3·2% to 1·7%. The Mesima Channel has its lower segment abandoned because of avulsion and crevasse‐splay formation at an upslope bend. The adjacent Gioia Channel has had its upper segment straightened and lower segment entrenched because of erosional deepening of the Stromboli Valley into which it debouches and which acts as the local base level. Overbank features include levées, coalescent splays and ‘yazoo’ channels; their nature and surface characteristics depend upon the magnitude and sediment grain‐size of spill‐over flows. On an adjoining narrow shelf sliver of the Calabrian margin, in contrast, the coalescing plumes of sediment suspension supplied by an array of smaller coastal streams were apparently spilling over the shelf edge, scouring a funnel‐shaped bypass depression with chutes and forming an elongate, non‐channellized depositional lobe at the slope base. The study demonstrates the impact of sediment source type, shelf width, basin‐floor gradient and base‐level change on the style of deep‐water sedimentation.  相似文献   

14.
The Palaeoproterozoic Frere Formation (ca 1.89 Gyr old) of the Earaheedy Basin, Western Australia, is a ca 600 m thick succession of iron formation and fine‐grained, clastic sedimentary rocks that accumulated on an unrimmed continental margin with oceanic upwelling. Lithofacies stacking patterns suggest that deposition occurred during a marine transgression punctuated by higher frequency relative sea‐level fluctuations that produced five parasequences. Decametre‐scale parasequences are defined by flooding surfaces overlain by either laminated magnetite or magnetite‐bearing, hummocky cross‐stratified sandstone that grades upward into interbedded hematite‐rich mudstone and trough cross‐stratified granular iron formation. Each aggradational cycle is interpreted to record progradation of intertidal and tidal channel sediments over shallow subtidal and storm‐generated deposits of the middle shelf. The presence of aeolian deposits, mud cracks and absence of coarse clastics indicate deposition along an arid coastline with significant wind‐blown sediment input. Iron formation in the Frere Formation, in contrast to most other Palaeoproterozoic examples, was deposited almost exclusively in peritidal environments. These other continental margin iron formations also reflect upwelling of anoxic, Fe‐rich sea water, but accumulated in the full spectrum of shelf environments. Dilution by fine‐grained, windblown terrigenous clastic sediment probably prevented the Frere iron formation from forming in deeper settings. Lithofacies associations and interpreted paragenetic pathways of Fe‐rich lithofacies further suggest precipitation in sea water with a prominent oxygen chemocline. Although essentially unmetamorphosed, the complex diagenetic history of the Frere Formation demonstrates that understanding the alteration of iron formation is a prerequisite for any investigation seeking to interpret ocean‐atmosphere evolution. Unlike studies that focus exclusively on their chemistry, an approach that also considers palaeoenvironment and oceanography, as well the effects of post‐depositional fluid flow and alteration, mitigates the potential for incorrectly interpreting geochemical data.  相似文献   

15.
Sandstone bodies in the Sunnyside Delta Interval of the Eocene Green River Formation, Uinta Basin, previously considered as point bars formed in meandering rivers and other types of fluvial bars, are herein interpreted as delta mouth‐bar deposits. The sandstone bodies have been examined in a 2300 m long cliff section along the Argyle and Nine Mile Canyons at the southern margin of the Uinta lake basin. The sandstone bodies occur in three stratigraphic intervals, separated by lacustrine mudstone and limestone. Together these stratigraphic intervals form a regressive‐transgressive sequence. Individual sandstone bodies are texturally sharp‐based towards mudstone substratum. In proximal parts, the mouth‐bar deposits only contain sandstone, whereas in frontal and lateral positions mudstone drapes separate mouth‐bar clinothems. The clinothems pass gradually into greenish‐grey lacustrine mudstone at their toes. Horizontally bedded or laminated lacustrine mudstone onlaps the convex‐upward sandstone bars. The mouth‐bar deposits are connected to terminal distributary channel deposits. Together, these mouth‐bar/channel sandstone bodies accumulated from unidirectional jet flow during three stages of delta advance, separated by lacustrine flooding intervals. Key criteria to distinguish the mouth‐bar deposits from fluvial point bar deposits are: (i) geometry; (ii) bounding contacts; (iii) internal structure; (iv) palaeocurrent orientations; and (v) the genetic association of the deposits with lacustrine mudstone and limestone.  相似文献   

16.
东非陆缘深水盆地具有巨大油气资源潜力,但对陆坡峡谷沉积特征研究较少,制约有利储集层预测。本研究利用三维地震资料,对东非坦桑尼亚滨海盆地陆坡峡谷开展精细研究。结果表明:(1)研究区陆坡发育多条大型海底峡谷;上陆坡处,坡度较陡,峡谷内以侵蚀作用为主,沉积物主要局限在褶皱推覆带的翼部;褶皱推覆带之外的下陆坡区,坡度变缓,峡谷末端发育席状砂质沉积及砂泥混杂的碎屑流沉积,同时在峡谷北侧发育向北延伸的泥质漂积体;在陆坡边缘,发育海底滑塌,形成块体搬运沉积。(2)峡谷沉积受陆源物质供给、褶皱推覆带、北大西洋底流以及陆坡边界断层等因素控制。受东非裂谷海域分支活动影响,研究区陆架窄、陆坡陡,陆源物质可迅速通过陆架,进入陆坡峡谷:与河流相连的峡谷,物源充足、规模较大,有沉积物发育而没有与河流直接相连的峡谷物源有限、规模较小,峡谷内无明显沉积;褶皱推覆带通过改变海底地形来控制峡谷内沉积分布,褶皱翼部发育沉积,核部则以侵蚀为主;褶皱推覆带外,北大西洋底流与峡谷末端重力流发生交互作用,细粒物质被搬运至峡谷北岸形成漂积体;陆坡边缘断层活跃,峡谷被断层切割,形成断崖,并引发海底滑塌,陆坡处不发育水道及朵体沉积,陆源物质通过峡谷被搬运至更深的深海盆地内。  相似文献   

17.
Submarine canyons are conduits for the distribution of sediment across continental margins. Although many canyons connect directly with fluvial or marine littoral system feeders, canyons detached from direct hinterland supply are also recognized. The fill of detached canyons remains enigmatic, because their deep‐water setting restricts analysis of their evolution and stratigraphic architecture. Therefore, this study aims to investigate the sedimentary processes that infilled deep‐water canyons and the resulting architecture. Miocene outcrops of an exhumed deep‐water system from the East Coast Basin, New Zealand, are documented and compared with the morphology and seismic scale architecture of a modern detached canyon system on the same convergent margin. The outcropping system preserves the downstream margin of a sub‐basin deposited at palaeo‐water depths >700 m. A 6 km wide by 430 m deep incision is filled by heterogeneous siliciclastic sediments, 50% of which comprise graded thin‐beds with traction structures, interpreted to result from oscillatory flows. These are intercalated with concave‐up lenses, up to 15 m thick, of sigmoidally‐bedded, amalgamated sandstones, which preserve ripple casts on bed bases, interpreted as deposits at the head of a deep‐marine canyon. Palaeo‐flow was eastward, into the sub‐basin margin. On the adjacent margin of the sub‐basin down‐dip, stacked and amalgamated sandstones and conglomerates represent the fill of a submarine channel complex, at least 3 km wide. The channels are inferred to have been fed by the up‐dip canyon, which traversed the intervening structural high; similar relationships are seen in the bathymetry data. Seismic studies on this margin demonstrate that multiple phases of canyon cut and fill may occur, with downstream architectural evolution comparable to that seen at outcrop, demonstrating that detached canyons may act as sediment conduits. Breaching of developing sea‐floor structures by detached canyons can modify tortuous sediment pathways, supplying sediment to otherwise starved areas of the slope.  相似文献   

18.
《Sedimentology》2018,65(6):2149-2170
Hyperpycnal currents are river‐derived turbidity currents capable of transporting significant volumes of sediment from the shoreline onto the shelf and potentially further to deep ocean basins. However, their capacity to deposit sand bodies on the continental shelf is poorly understood. Shelf hyperpycnites remain an overlooked depositional element in source to sink systems, primarily due to their limited recognition in the rock record. Recent discoveries of modern shelf hyperpycnites, and previous work describing hyperpycnites deposited in slope or deep‐water settings, provide a valuable framework for understanding and recognizing shelf hyperpycnites in the rock record. This article describes well‐sorted lobate sand bodies on the continental shelf of the Neuquén Basin, Argentina, interpreted to have been deposited by hyperpycnal currents. These hyperpycnites of the Jurassic Lajas Formation are characterized by well‐sorted, medium‐grained, parallel‐laminated sandstones with hundreds of metre extensive, decimetre thick beds encased by organic‐rich, thinly laminated sandstone and siltstone. These deposits represent slightly obliquely‐migrating sand lobes fed by small rivers and deposited on the continental shelf. Hyperpycnites of the Lajas Formation highlight several unique characteristics of hyperpycnal deposits, including their distinctively thick horizontal laminae attributed to pulsing of the hyperpycnal currents, the extraction of coarse gravel due to low flow competence, and the extraction of mud due to lofting of light interstitial fluid. Recognition of shelf hyperpycnites in the Lajas Formation of the Neuquén Basin allows for a broader understanding of shelf processes and adds to the developing facies models of hyperpycnites. Recognizing and understanding the geometry and internal architecture of shelf hyperpycnites will improve current understanding of sediment transfer from rivers to deeper water, will improve palaeoenvironmental interpretations of sediment gravity‐flow deposits, and has implications for modelling potentially high‐quality hydrocarbon reservoirs.  相似文献   

19.
Depositional slope systems along continental margins contain a record of sediment transfer from shallow‐water to deep‐water environments and represent an important area for natural resource exploration. However, well‐preserved outcrops of large‐scale depositional slopes with seismic‐scale exposures and tectonically intact stratigraphy are uncommon. Outcrop characterization of smaller‐scale depositional slope systems (i.e. < 700 m of undecompacted shelf‐to‐basin relief) has led to increased understanding of stratigraphic packaging of prograding slopes. Detailed stacking patterns of facies and sedimentary body architecture for larger‐scale slope systems, however, remain understudied. The Cretaceous Tres Pasos Formation of the Magallanes Basin, southern Chile, presents a unique opportunity to evaluate the stratigraphic evolution of such a slope system from an outcrop perspective. Inherited tectonic relief from a precursor oceanic basin phase created shelf‐to‐basin bathymetry comparable with continental margin systems (～1000 m). Sedimentological and architectural data from the Tres Pasos Formation at Cerro Divisadero reveal a record of continental margin‐scale depositional slope progradation and aggradation. Slope progradation is manifested as a vertical pattern exhibiting increasing amounts of sediment bypass upwards, which is interpreted as reflecting increasing gradient conditions. The well‐exposed, seismic‐scale outcrop is characterized by four 20 to 70 m thick sandstone‐rich successions, separated by mudstone‐rich intervals of comparable thickness (40 to 90 m). Sedimentary body geometry, facies distribution, internal bedding architecture, sandstone richness and degree of amalgamation were analysed in detail across a continuous 2·5 km long transect parallel to depositional dip. Deposition in the lower section (Units 1 and 2) was dominated by poorly channellized to unconfined sand‐laden flows and accumulation of mud‐rich mass transport deposits, which is interpreted as representing a base of slope to lower slope setting. Evidence for channellization and indicators of bypass of coarse‐grained turbidity currents are more common in the upper part of the > 600 m thick succession (Units 3 and 4), which is interpreted as reflecting increased gradient conditions as the system accreted basinward.  相似文献   

20.
The study of new seismic data permits the identification of sediment gravity flows in terms of internal architecture and the distribution on shelf and abyssal setting in the Qiongdongnan Basin (QDNB). Six gravity flow types are recognized: (1) turbidite channels with a truncational basal and concordant overburden relationship along the shelf edge and slope, comprising laterally-shifting and vertically-aggrading channel complexes; (2) slides with a spoon-shaped morphology slip steps on the shelf-break and generated from the deformation of poorly-consolidated and high water content sediments; (3) slumps are limited on the shelf slope, triggered either by an anomalous slope gradient or by fault activity; (4) turbidite sheet complexes (TSC) were ascribed to the basin-floor fan and slope fan origin, occasionally feeding the deep marine deposits by turbidity currents; (5) sediment waves occurring in the lower slope-basin floor, and covering an area of approximately 400?km2, were generated beneath currents flowing across the sea bed; and (6) the central canyon in the deep water area represents an exceptive type of gravity flow composed of an association of debris flow, turbidite channels, and TSC. It presents planar multisegment and vertical multiphase characteristics. Turbidite associated with good petrophysical property in the canyon could be treated as a potential exploration target in the QDNB.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号