首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 187 毫秒
1.
The new data for the geology and mineralogy of the platinum group element (PGE) mineralization related to the chromite–platinum ore zones within the dunite of the Svetly Bor and Veresovy Bor massifs in the Middle Urals are discussed. The geological setting of the chromite–platinum ore zones, their platinum content, compositional and morphological features of the platinum group minerals (PGM) are compared to those within the Nizhny Tagil massif, the world standard of the zonal complexes in the Platinum Ural belt. The chromite–platinum orebodies are spatially related to the contacts between differently granular dunites. Majority of PGM are formed by Pt–Fe alloys that are close in terms of stoichiometry to isoferroplatinum (Pt3Fe), and associated with Os–Ir alloys, Ru–Os and Ir–Rh sulfides, and Ir–Rh thiospinels of the cuproiridsite–cuprorhodsite–ferrorhodsite solid solution. The tetraferroplatinum (PtFe)–tulameenite (PtFe0.5Cu0.5) solid solution and Pt–Cu alloys belong to the later PGM assemblage. The established features of the chromite–platinum ore zones testify to the highly probable identification of the PGE mineralization within the dunite of the Svetly Bor and Vesesovy Bor massifs and could be used in prospecting and exploration for platinum.  相似文献   

2.
Features of the chemical composition of platinum-group mineral assemblages from chromitites of the zonal Svetly Bor, Veresovy Bor, and Nizhny Tagil clinopyroxenite–dunite massifs of the Middle Urals are compared for the first time.  相似文献   

3.
The Huangshannan magmatic Ni-Cu sulfide deposit is one of a group of Permian magmatic Ni-Cu deposits located in the southern Central Asian Orogenic belt in the Eastern Tianshan, northwest China. It is characterized by elevated Ni tenor (concentrations in recalculated 100% sulfide) in sulfide within ultramafic rocks (9–19 wt%), with values much higher than other deposits in the region. Sulfides of the Huangshannan deposit are composed of pentlandite, chalcopyrite, and pyrrhotite and the host rock is relatively fresh, indicating that the high-Ni tenor is a primary magmatic feature rather than formed by alteration processes. It is shown that sulfides with high-Ni tenor can be generated by sulfide-olivine equilibrium at an oxygen fugacity of QFM +0.5, for magmas containing 450 ppm Ni and 20% olivine. Ores with >10 wt% sulfur have relatively low PGE and Ni tenors compared to other ores, R factor (mass ratio of silicate to sulfide liquid) modeling of Ni indicates that they formed at moderate R values (150–600). Based on this constraint on R values, ores with <10 wt% sulfides in the Huangshannan deposit can be segregated from a similar parental magma with 0.05 ppb Os, 0.023 ppb Ir, and 0.5 ppb Pd at R values between 600 and 3000. This, coupled with the supra-cotectic proportions of sulfide liquid to cumulus silicates in the Huangshannan ores imply mechanical transport and deposition of sulfide liquid in a magma pathway or conduit, in which sulfides must have interacted with large volumes of silicate magma. Platinum and Pd depletion relative to other platinum group elements (PGEs) are observed in fresh and sulfide-rich samples (S > 4.5 wt%). As sulfide-rich samples are also depleted in Cu, and as interstitial sulfides in those samples are physically interconnected at a scale of several cms, the low Pt and Pd anomalies are attributed to solid Pt and Pd phases crystallization and retention with the monosulfide solid solution (MSS) and Cu-rich sulfide liquid percolation during MSS fractionation. This finding indicates that Pt anomalies in sulfide-rich rocks from magmatic Ni-Cu deposits in the Eastern Tianshan are the result of sulfide fractionation rather than a hydrothermal effect. 187Os/188Os(278Ma) values of the lherzolite samples vary from 0.27 to 0.37 and γOs(278Ma) values vary from 110 to 189, indicating significant magma interaction with crustal sulfides, rich in radiogenic Os. Well constrained γOs values and δ34S values (−0.4 to 0.8‰) indicate that crustal contamination occurred at depth before the arrival of the magma in the Huangshannan chamber. Regionally, deposits with high-Ni tenor have not been reported other than the Huangshannan deposit; however, many intrusions with high-Ni contents in olivine are present in NW China, such as the Erhongwa, Poyi and Poshi intrusions. Those intrusions are capable of forming high-Ni tenor sulfides due to olivine-sulfide-silicate equilibrium and relative high-Ni content in parent magma, making them attractive exploration targets.  相似文献   

4.
The Xiadong Alaskan-type complex shares much in common with typical Alaskan-type complexes worldwide, while showing some unique features in terms of mineral compositions. Olivine from the Xiadong dunites is characterized by extremely high Fo component of 91.7–96.7 and anomalously negative correlation of Fo with NiO, while chromite is featured by high 100 × Fe3+/(Fe3+ + Cr + Al) (>70), high 100 × Fe2+/(Fe2+ + Mg) (>70), high 100 × Cr/(Cr + Al) (>90), low MnO (<0.6 wt%) and TiO2 contents (<0.5 wt%). To investigate these particular features, we conducted petrographic observation and mineral composition analyses for the Xiadong dunite. A number of Fe and/or Ni sulfides and alloys occurring as inclusions in olivine and chromite indicate that base metal mineral segregation took place prior to crystallization of olivine and chromite and probably induced Fe and Ni depletions in olivine. The FeO and MgO variations in profile analyses from chromite to adjacent olivine are compatible with Fe-Mg exchange. The diffusion mechanism of Fe from olivine to chromite and Mg from chromite to olivine may have elevated both Fo of olivine and 100 × Fe2+/(Mg + Fe2+) ratio of chromite and further enhanced the decoupling of Fo and NiO in olivine. We thus suggest that base metal mineral segregation and Fe-Mg exchange play important roles in the extreme compositions of the Xiadong dunite. The Ni depletion of olivine and degree of Fe-Mg exchange between olivine and chromite may be used as indicators of mineralization in mafic-ultramafic intrusions.  相似文献   

5.
The Sotkavaara Intrusion is a small (2.5 × 1.5 km surface expression) mafic-ultramafic intrusion located in northern Finland, 25 km east-southeast of Rovaniemi. The intrusion was drilled by the Geological Survey of Finland between 2009 and 2012, when low-S, low-grade precious metal mineralisation (<1.1 ppm Pt + Pd + Au) was discovered. Emplaced into the 1.98 Ga eastern Peräpohja Schist Belt, Sotkavaara occurs a few tens of kilometres north of the 2.44 Ga the Penikat, Portimo and Koillismaa intrusions, which together host Europe’s most significant platinum-group element (PGE) mineralisation. The intrusion comprises a volumetrically subordinate Gabbro Unit and volumetrically dominant Pyroxenite Unit, within which layering is poorly-developed. The Pyroxenite Unit is composed predominantly of clinopyroxenite and contains a small number of laterally discontinuous wehrlite, olivine clinopyroxenite and low-Cr clinopyroxenite (<0.1 wt% Cr2O3) layers. Precious metal mineralisation is hosted by low-Cr clinopyroxenite layers and shows systematic Pt, Pd, Au and Cu offsets similar to those in the Munni Munni, Rincón del Tigre, Skaergaard and Great Dyke intrusions. Relative to these global examples, the Sotkavaara Intrusion represents an atypical occurrence, exhibiting poorly-developed modal layering in a small mafic-ultramafic intrusion, alongside moderately heavy δ 34S values (+1.3 to +9.6‰). Despite this, mineralisation can be broadly attributed to similar ore-forming processes, whereby in-situ fractional crystallisation is ultimately responsible for generating small volumes of sulphide melt. Although mineralisation is sub-economic, this occurrence indicates that northern Finland may be prospective for magmatic sulphide deposits in Svecofennian-age mafic-ultramafic intrusions. Globally, Sotkavaara highlights that well-developed modal layering and large magma chambers are not necessarily requirements for forming this type of mineralisation.  相似文献   

6.
Copper and iron skarn deposits are economically important types of skarn deposits throughout the world, especially in China, but the differences between Cu and Fe skarn deposits are poorly constrained. The Edong ore district in southeastern Hubei Province, Middle–Lower Yangtze River metallogenic belt, China, contains numerous Fe and Cu–Fe skarn deposits. In this contribution, variations in skarn mineralogy, mineralization-related intrusions and sulfur isotope values between these Cu–Fe and Fe skarn deposits are discussed.The garnets and pyroxenes of the Cu–Fe and Fe skarn deposits in the Edong ore district share similar compositions, i.e., dominantly andradite (Ad29–100Gr0–68) and diopside (Di54–100Hd0–38), respectively. This feature indicates that the mineral compositions of skarn silicate mineral assemblages were not the critical controlling factors for variations between the Cu–Fe and Fe skarn deposits. Intrusions associated with skarn Fe deposits in the Edong ore district differ from those Cu–Fe skarn deposits in petrology, geochemistry and Sr–Nd isotope. Intrusions associated with Fe deposits have large variations in their (La/Yb)N ratios (3.84–24.6) and Eu anomalies (δEu = 0.32–1.65), and have relatively low Sr/Y ratios (4.2–44.0) and high Yb contents (1.20–11.8 ppm), as well as radiogenic Sr–Nd isotopes (εNd(t) = − 12.5 to − 9.2) and (87Sr/86Sr)i = 0.7067 to 0.7086. In contrast, intrusions associated with Cu–Fe deposits are characterized by relatively high Sr/Y (35.0–81.3) and (La/Yb)N (15.0–31.6) ratios, low Yb contents (1.00–1.62 ppm) without obvious Eu anomalies (δEu = 0.67–0.97), as well as (87Sr/86Sr)i = 0.7055 to 0.7068 and εNd(t) = − 7.9 to − 3.4. Geochemical evidence indicates a greater contribution from the crust in intrusions associated with Fe skarn deposits than in intrusions associated with Cu–Fe skarn deposits. In the Edong ore district, the sulfides and sulfates in the Cu–Fe skarn deposits have sulfur isotope signatures that differ from those of Fe skarn deposits. The Cu–Fe skarn deposits have a narrow range of δ34S values from − 6.2‰ to + 8.7‰ in sulfides, and + 13.2‰ to + 15.2‰ in anhydrite, while the Fe skarn deposits have a wide range of δ34S values from + 10.3‰ to + 20.0‰ in pyrite and + 18.9‰ to + 30.8‰ in anhydrite. Sulfur isotope data for anhydrite and sedimentary country rocks suggest that the formation of skarns in the Edong district involved the interaction between magmatic fluids and variable amounts of evaporites in host rocks.  相似文献   

7.
The Wajilitag igneous complex is part of the early Permian Tarim large igneous province in NW China, and is composed of a layered mafic–ultramafic intrusion and associated syenitic plutons. In order to better constrain its origin, and the conditions of associated Fe–Ti oxide mineralization, we carried out an integrated study of mineralogical, geochemical and Sr–Nd–Hf isotopic analyses on selected samples. The Wajilitag igneous rocks have an OIB-like compositional affinity, similar to the coeval mafic dykes in the Bachu region. The layered intrusion consists of olivine clinopyroxenite, coarse-grained clinopyroxenite, fine-grained clinopyroxenite and gabbro from the base upwards. Fe–Ti oxide ores are mainly hosted in fine-grained clinopyroxenite. Forsterite contents in olivines from the olivine clinopyroxenite range from 71 to 76 mol%, indicating crystallization from an evolved magma. Reconstructed composition of the parental magma of the layered intrusion is Fe–Ti-rich, similar to that of the Bachu mafic dykes. Syenite and quartz syenite plutons have εNd(t) values ranging from +1.4 to +2.9, identical to that for the layered intrusion. They may have formed by differentiation of underplated magmas at depth and subsequent fractional crystallization. Magnetites enclosed in olivines and clinopyroxenes have Cr2O3 contents higher than those interstitial to silicates in the layered intrusion. This suggests that the Cr-rich magnetite is an early crystallized phase, whereas interstitial magnetite may have accumulated from evolved Fe–Ti-rich melts that percolated through a crystal mush. Low V content in Cr-poor magnetite (<6600 ppm) is consistent with an estimate of oxygen fugacity of FMQ + 1.1 to FMQ + 3.5. We propose that accumulation of Fe–Ti oxides during the late stage of magmatic differentiation may have followed crystallization of Fe–Ti-melt under high fO2 and a volatile-rich condition.  相似文献   

8.
Experimental studies, performed under oxidized conditions (fO2 > QFM + 2, where QFM is quartz–fayalite–magnetite oxygen buffer), have shown that Rh, Ru, Ir and Os are strongly compatible with Cr spinel, whereas empirical studies of Cr spinels from ultramafic–mafic rocks suggest that the experimental results may overestimate the partition coefficients. We report laser-ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) analyses of platinum-group elements (PGE), Au and Re abundances in Cr spinels from the Ambae volcano, Vanuatu (fO2 = QFM + 2.5), the Jimberlana layered intrusion, western Australia, and the Bushveld complex, South Africa (fO2 ～ QFM). The results show that Rh and IPGEs (Iridium-group PGE; Ru, Ir, Os) partition strongly into the Cr spinels that crystallized from the oxidized Ambae lavas whereas most of the Cr spinels from the more reduced Jimberlana layered intrusion and the Bushveld complex contain no detectable PGE, Au or Re, with exception of ～10 ppb of Ir in some Jimberlana Cr spinels. In the Ambae Cr spinels, Rh, Ru and, to lesser extent Os, are positively correlated with Fe3+, Ni and V. The homogeneous distribution of Rh and IPGEs in LA-ICP-MS time-resolved spectra indicates that these elements are in solid solution in Cr spinels. Pt–Fe alloys occur as inclusions within the Ambae Cr spinels, which indicate that the Ambae melt was saturated with Pt.Our results show that partitioning of Rh, Ru and Ir into Cr spinels increases with increasing oxygen fugacity, which suggests that the high concentrations of these elements in the Ambae Cr spinels are due to the high oxygen fugacity of the host magma. Therefore, Cr spinels may play an important role in controlling the concentrations of Rh and IPGEs during fractional crystallization of oxidized ultramafic–mafic magmas and during partial melting of oxidized arc mantle.  相似文献   

9.
The Anyi intrusion is located in the central zone of Emeishan large igneous province (ELIP), SW China. It outcrops in an area of about 0.65 km2 and ~ 1 km thick and dips to the southwest. The Anyi intrusion consists of a lower clinopyroxenite zone, middle gabbro zone, and an upper monzonite–syenite zone. Up to 400 m thick stratiform disseminated Fe–Ti oxide layer with grades of 16–18 wt.% total Fe is hosted in the lower clinopyroxenite zone. Zircon SHRIMP U–Pb age (247 ± 3 Ma) indicates that the Anyi intrusion represents postdated mafic magmatism resulting from the ~ 260 Ma Emeishan mantle plume. Compared with the typical oxide-bearing intrusions (such as Panzhihua and Baima) formed at ~ 260 Ma in the ELIP, the Anyi intrusion is characterized by high alkaline contents and LREE/HREE ratios, extremely low εNd values (− 6.2 to − 7.6) and moderate high (87Sr/86Sr)i values (0.7072 to 0.7086). These characteristics of the Anyi intrusion cannot be explained by fractional crystallization or crustal contamination, but may reflect a unique enriched continental lithospheric mantle source (a mantle source mixed between garnet pyroxenite and spinel peridotite). We propose that the postdated mafic magmatism associated with the formation of the Anyi intrusion and its Fe–Ti oxide ore may be the product of melting of a mantle source mixed between garnet pyroxenite and spinel peridotite in the shallow lithosphere caused by conductive heating combined with lithosphere thinning due to plume–lithosphere interaction.  相似文献   

10.
Porphyry Cu deposits occurred in the southern West Junggar of Xinjiang, NW China and are represented by the Baogutu and newly-discovered Jiamantieliek porphyry Cu deposits. Petrographical and geochemical studies show that both Jiamantieliek and Baogutu ore-bearing intrusions comprise main-stage diorite stock and minor late-stage diorite porphyry dikes and are the calc-alkaline intermediate intrusions. Based on U–Pb zircon SHRIMP analyses, the Jiamantieliek intrusion formed in 313 ± 4 Ma and 310 ± 5 Ma, while, based on U–Pb zircon SIMS analyses, the Baogutu intrusion formed in 313 ± 2 Ma and 312 ± 2 Ma. Rocks in the Jiamantieliek intrusion are enriched in light rare earth elements (LREE) and large ion lithophile elements (LILE) with negative Nb anomaly. Their isotopic compositions (εNd(t) = +1.6 to +3.4, (87Sr/86Sr)i = 0.70369–0.70401, (207Pb/204Pb)i = 15.31–5.41) suggest a mixing origin from depleted to enriched mantle sources. In the Baogutu intrusion, the rocks are similar to those of the Jiamantieliek intrusion. Their Sr-Nd-Pb isotopic composition (εNd(t) = +4.4 to +6.0, (87Sr/86Sr)i = 0.70368–0.70385, (207Pb/204Pb)i = 15.34–5.42) shows a more depleted mantle source. These features suggest generation in an island arc. The Jiamantieliek and Baogutu intrusions have similar characteristics, indicating that a relatively uniform and integrated source region has existed in the southern West Junggar since the Palaeozoic. A larger contribution of calc-alkaline magma would be required to generate the Jiamantieliek intrusion, which may reflect the development of magma arc maturation towards the western section of the southern West Junggar.  相似文献   

11.
Four elongate, km-scale, mafic to ultramafic bodies (UMB) were identified within the Ordovician-Silurian Dido Batholith, north Queensland, and were assessed for Ni-Cu-PGE fertility. The UMB comprise layered cumulate sequences and represent open-system intrusions emplaced at mid-crustal levels. The UMB are divided into two petrographically and geochemically distinct types: (1) low-Fe UMB (3 intrusions), comprising dunites, wehrlites, troctolites and olivine gabbro which contain variable amounts of olivine (Fo85–72), clinopyroxene (Mg# 0.87–0.73), plagioclase (An92–72) and chromites; and (2) high-Fe UMB (1 intrusion), comprising dunites, wehrlites and pyroxenites which lack chromites, contain abundant early crystallising Fe-Ti oxides and hornblende, and less primitive olivines (Fo78–72) and pyroxenes (Mg# 0.87–0.73). The calculated parent magmas of the low-Fe UMB contained 8–10 wt% of both MgO and FeOt, whereas the high-Fe UMB parent magmas were more evolved, having higher FeOt (12–16 wt%) and lower MgO (6.2–8.2 wt%), Ni and Cr concentrations. The parent magmas of the Dido UMB are interpreted as mantle-derived arc rift or backarc tholeiites, and mineral compositions suggest the UMB are similar to arc-cumulate, Klamath-type intrusions. Crustal contamination during ascent is suggested to be responsible for the LREE-enriched and Nb- and Ti-depleted nature of the UMB parent magmas. A two-component Sr-Nd isotope mixing model suggests that the addition of variable amounts (<5% in the low-Fe UMB and 9–10% in the high-Fe UMB) of 2000–2500 Ma igneous crustal contaminant to tholeiitic melts derived from a slightly enriched mantle source can account for isotopic compositions of the UMB. Although the mantle-derived, crustally contaminated nature of the parent magmas are positive factors for magmatic sulphide mineralisation, economic mineralisation has not been found associated with the UMB. Geochemical discriminators, such as Cu/Pd and Ni-depletion, suggest that the magmas that formed the km-scale UMB were chalcophile element-depleted, having undergone a previous S-saturation event (i.e., significant sulphide-deposition) at depth. The slight PGE-enrichment in the high-Fe cumulates (up to 160 ppb of both Pt and Pd) is suggested to be due to the addition of small amounts of PGE to the high-Fe magmas from an external source. There is no evidence to suggest that large volumes of PGE-enriched sulphides were added to the UMB magmas. These findings, in addition to the knowledge that most large deposits are associated with intracontinental settings rather than convergent settings, determined that the investigated Dido UMB are low-priority Ni-Cu-PGE targets. However, the likelihood that the Dido UMB were emplaced in local extensional regimes within subduction-related environments, i.e., a similar geodynamic setting to economic deposits such as Aguablanca (Spain), requires that other UMB in the Dido area are assessed on an individual basis.  相似文献   

12.
The northeastern Gangdese Pb–Zn–Ag–Fe–Mo–W polymetallic belt (NGPB), characterized by skarn and porphyry deposits, is one of the most important metallogenic belts in the Himalaya–Tibetan continental orogenic system. This belt extends for nearly four hundred kilometers along the Luobadui–Milashan Fault in the central Lhasa subterrane, and contains more than 10 large ore deposits with high potential for development. Three major types of mineralization system have been identified: skarn Fe systems, skarn/breccia Pb–Zn–Ag systems, and porphyry/skarn Mo–Cu–W systems. In this study, we conducted a whole-rock geochemical, U–Pb zircon geochronological, and in situ zircon Hf isotopic study of ore-forming rocks in the NGPB, specifically the Jiangga, Jiaduopule, and Rema skarn Fe deposits, and the Yaguila Pb–Zn–Ag deposit. Although some of these deposits (porphyry Mo systems) formed during the post-collisional stage (21–14 Ma), the majority (these three systems) developed during the main (‘soft collision’) stage of the India–Asia continental collision (65–50 Ma). The skarn Fe deposits are commonly associated with granodiorites, monzogranites, and granites, and formed between 65 and 50 Ma. The ore-forming intrusions of the Pb–Zn–Ag deposits are characterized by granite, quartz porphyry, and granite porphyry, which developed in the interval of 65–55 Ma. The ore-forming porphyries in the Sharang Mo deposit, formed at 53 Ma. The rocks from Fe deposits are metaluminous, and have relatively lower SiO2, and higher CaO, MgO, FeO contents than the intrusions associated with Mo and Pb–Zn–Ag mineralization, while the Pb–Zn–Ag deposits are peraluminous, and have high SiO2 and high total alkali concentrations. They all exhibit moderately fractionated REE patterns characterized by lower contents of heavy REE relative to light REE, and they are enriched in large-ion lithophile elements and relatively depleted in high-field-strength elements. Ore-forming granites from Fe deposits display 87Sr/86Sr(i) = 0.7054–0.7074 and εNd(t) = − 4.7 to + 1.3, whereas rocks from the Yaguila Pb–Zn–Ag deposit have 87Sr/86Sr(i) = 0.7266–0.7281 and εNd(t) = − 13.5 to − 13.3. In situ Lu–Hf isotopic analyses of zircons from Fe deposits show that εHf(t) values range from − 7.3 to + 6.6, with TDM(Hf)C model ages of 712 to 1589 Ma, and Yaguila Pb–Zn–Ag deposit has εHf(t) values from − 13.9 to − 1.3 with TDM(Hf)C model ages of 1216 to 2016 Ma. Combined with existing data from the Sharang Mo deposit, we conclude that the ore-forming intrusions associated with the skarn Fe and porphyry Mo deposits were derived from partial melting of metasomatized lithospheric mantle and rejuvenated lower crust beneath the central Lhasa subterrane, respectively. Melting of the ancient continental material was critical for the development of the Pb–Zn–Ag system. Therefore, it is likely that the source rocks play an important role in determining the metal endowment of intrusions formed during the initial stage of the India–Asia continental collision.  相似文献   

13.
We report new data on the stratigraphy, mineralogy and geochemistry of the rocks and ores of the Maslovsky Pt–Cu–Ni sulfide deposit which is thought to be the southwestern extension of the Noril’sk 1 intrusion. Variations in the Ta/Nb ratio of the gabbro-dolerites hosting the sulfide mineralization and the compositions of their pyroxene and olivine indicate that these rocks were produced by two discrete magmatic pulses, which gave rise to the Northern and Southern Maslovsky intrusions that together host the Maslovsky deposit. The Northern intrusion is located inside the Tungusska sandstones and basalt of the Ivakinsky Formation. The Southern intrusion cuts through all of the lower units of the Siberian Trap tuff-lavas, including the Lower Nadezhdinsky Formation; demonstrating that the ore-bearing intrusions of the Noril’sk Complex post-date that unit. Rocks in both intrusions have low TiO2 and elevated MgO contents (average mean TiO2 <1 and MgO?=?12?wt.%) that are more primitive than the lavas of the Upper Formations of the Siberian Traps which suggests that the ore-bearing intrusions result from a separate magmatic event. Unusually high concentrations of both HREE (Dy+Yb+Er+Lu) and Y (up to 1.2 and 2.1?ppm, respectively) occur in olivines (Fo79.5 and 0.25% NiO) from picritic and taxitic gabbro-dolerites with disseminated sulfide mineralization. Thus accumulation of HREE, Y and Ni in the melts is correlated with the mineral potential of the intrusions. The TiO2 concentration in pyroxene has a strong negative correlation with the Mg# of both host mineral and Mg# of host rock. Sulfides from the Northern Maslovsky intrusion are predominantly chalcopyrite–pyrrhotite–pentlandite with subordinate and minor amounts of cubanite, bornite and millerite and a diverse assemblage of rare precious metal minerals including native metals (Au, Ag and Pd), Sn–Pd–Pt–Bi–Pb compounds and Fe–Pt alloys. Sulfides from the Southern Maslovsky intrusion have δ 34S?=?5–6‰ up to 10.8‰ in two samples whereas the country rock basalt have δ 34S?=?3–4‰, implying there was no in situ assimilation of surrounding rocks by magmas.  相似文献   

14.
Summary The study of platinum-group minerals (PGM) concentrates from the Nizhni Tagil placers related to the Soloviev Mountain (Gora Solovieva) Uralian-Alaskan-type intrusion revealed a predominance of (Pt, Fe) alloys over Ir-, and Os-bearing alloys. (Pt, Fe) alloys (“isoferroplatinum-type”) are interstitial with respect to chromite and show important variations in their chemical compositions, which are, however, falling within the experimentally determined stability field of isoferroplatinum. Tetraferroplatinum, enriched in Cu and Ni and tulameenite represent low-temperature mineral phases replacing (Pt, Fe) alloys. Alloys belonging to the Os–Ir–Ru ternary system have compositions corresponding to native osmium, iridium and ruthenium, respectively, and to rutheniridosmine. Osmium exsolutions appear in Ir-, and (Pt, Fe) alloys, and iridium exsolutions in (Pt, Fe) alloys. Laurite is a high-temperature phase included in native iridium and (Pt, Fe) alloys. Low-temperature PGM association comprises Ir-bearing sulpharsenides, including a phase (Ir, Os, Fe, Pt, Ru, Ni)3(As, Sb)0.85S, and a palladium antimonide Pd20Sb7. These two phases were previously unknown in nature. Furthermore, native palladium occurs in the studied concentrates. This low-temperature paragenesis indicates an interaction of Pt-, Os-, Ir- and Ru-bearing alloys with late fluids enriched in volatiles, As and Sb. The chromite composition is characterized by the predominance of Cr3+ → Fe3+ substitution like in other Uralian-Alaskan-type intrusions; that indicates a fO2 variation during the chromite precipitation. Monomineralic inclusions of euhedral clinopyroxene and chromite crystals in (Pt, Fe) alloys were observed. Furthermore, (Pt, Fe) alloys contain polyphase silicate inclusions, which occupy the alloy negative crystals. Two types of silicate inclusions were recognized: (1) Low-pressure inclusions composed of amphibole, biotite, Jd-poor clinopyroxene, magnetite, apatite and glass; (2) High-pressure inclusions include: omphacitic clinopyroxene (up to 56 mol.% Jd), tremolite, muscovite, apatite, titanite and glass. In this case, the clinopyroxene is strongly zoned, revealing a pressure drop from about 25 to 5 kbar. The chemical composition of glass is corundum-normative and its H2O content varies from about 12 to 15 wt.%. The composition of magmatic melts, from which the silicate inclusions have originated was estimated using EPMA and image analysis interpreted by stereology. Their compositions are close to those obtained experimentally by hydrous partial melting of upper mantle rocks. The interpretation of analytical data shows that magmatic melts entrapped by (Pt, Fe) alloys crystallized from about 1100 to 700 °C. The (Pt, Fe) alloys formed after the crystallization of chromite, clinopyroxene and albite. Consequently, the precipitation temperature of (Pt, Fe) alloys is estimated at about 900 °C. The significant pressure drop implies a decrease of volatile concentrations in the magmatic melt and the possible formation of a fluid phase, which might have generated, the precipitation of chromite and PGM.  相似文献   

15.
The Baima layered intrusion is located in the central part of the Emeishan Large Igneous Province (ELIP). The N–S striking intrusion is ~ 24 km long and ~ 2 km thick and dips to the west. Based on variations in modal proportions and cumulus mineral assemblages, the intrusion from the base to the top is simply subdivided into a lower zone (LZ) with most of the economic magnetite layers, and an upper zone (UZ) with apatite-bearing troctolite and gabbro. The rock textures suggest crystallization of the Fe–Ti oxide slightly later than plagioclase (An67-54) but relatively earlier than olivine (Fo74-55), followed by clinopyroxene and finally apatite.Relatively low olivine forsterite content and abundant ilmenite exsolution lamellae in clinopyroxene indicate that the Baima parental magma is a highly evolved Fe–Ti-rich magma. Via MELTS model, it demonstrates that under a closed oxygen system, extensive silicate mineral fractionation of a picritic magma might lead to Fe and Ti enrichment and oxygen fugacity elevation in the residual magma. When such Fe–Ti-rich magma ascends to the shallower Baima intrusion, the Fe–Ti oxides may become an early liquidus phase. Well-matched olivine and plagioclase microprobe data with the results of MELTS calculation, combined with relatively low CaO content in olivine (0.02–0.08 wt.%) indicate that wall-rock contamination probably plays a weak role on oxygen fugacity elevation and the early crystallization of Fe–Ti oxides. Several reversals in whole-rock chromium and plagioclase anorthite contents illustrate that multiple recharges of such Fe–Ti-rich magma mainly occurred along the lower part of the Baima magma chamber. Frequent Fe–Ti-rich magma replenishment and gravitational sorting and settling are crucial for the development of thick Fe–Ti oxide layers at the base of the Baima layered intrusion.  相似文献   

16.
The Jinping–Fan Si Pan (JFP) Cenozoic magmatic and Cu–Mo–Au metallogenic belt in the southeastern part of the Ailao Shan shear zone host the Tongchang, Chang′an, Habo, and Chinh Sang Cu–Mo–Au deposits. These deposits form an integrated epithermal-porphyry regional mineralization system associated with 40–32 Ma high-K alkaline magmatism. The magmatic rocks in the belt have relatively low TiO2 (<0.73 wt%), P2O5 (<0.29 wt%), and FeO* (<4.99 wt%), and high Na2O (2.86–4.75 wt%) and K2O (4.01–7.98 wt%). They also have high contents of incompatible trace elements, and are enriched in LILE (Rb, Ba, K, Sr) and LREE. They have marked Nb, Ta, Ti and P depletion in primitive mantle-normalized spidergrams, and plot close to the EMII mantle field in the Sr–Nd isotopic diagram. These characteristics are similar to those of the Eocene high-K alkaline rocks along the northern Ailao Shan belt, eastern Tibet plateau. The sulfur and lead isotope analyses of sulfide minerals from both the ores and related magmatic rocks confirm the involvement of a magmatic ore fluid. The Cenozoic alkaline intrusions and Cu–Mo–Au mineralization in the JFP were formed prior to the initiation of left-lateral shearing along the Ailao Shan shear zone. The magmas appear to have been derived from enriched mantle, possibly with mixing of materials from the buried Tethyan oceanic lithosphere, and/or crust.  相似文献   

17.
The Dongguashan skarn-porphyry Cu-Au deposit, located in the Tongling district of the Middle-Lower Yangtze River Valley metallogenic belt (MLYB), consists of skarn ore bodies in the upper part and porphyry ore bodies in the lower part, both of which are hosted in quartz diorite and quartz monzodiorite. Zircon U-Pb age and geochemical studies show that the quartz diorite of the Dongguashan intrusion formed at 140.3 ± 2.0 Ma (MSWD = 0.19) and belongs to the high potassium calc-alkaline series. It is enriched in large ion lithophile elements (LILE) and light rare earth elements (LREE), depleted in high field-strength elements (HFSE) and heavy rare earth elements (HREE), and has a slightly negative Eu anomaly. 176Hf/177Hf values of the rims of zircons show a variable range (0.282087–0.282391), corresponding with calculated εHf(t) values of − 10.72 to − 21.46. Plagioclases in the quartz diorite have unbalanced structure characterized by bright andesine and labradorite (An = 37.0–65.5) cores with higher contents of Fe and Sr and are corroded by dark oligoclase (An = 13.8–27.6) rim. Major elements, trace elements, Hf isotope, and the composition of plagioclases indicate that the parental magma of the Dongguashan intrusion was produced by the mixing of underplating mafic magma and felsic magma formed by remelting of Paleoproterozoic and Neoarchean crustal rocks, Neoproterozoic crust may also provide some material to the felsic magma. Mafic magma played a key role and made the parental magma rich in water, sulfur, metals (Cu, Au) and gave it a high oxygen fugacity. During its magmatic evolution, the parental magma underwent fractional crystallization of hornblende, apatite, sphene and other mafic minerals. Some quartz diorite and quartz monzodiorite samples that show adakitic signatures, may result from injection of mafic magma. Some inherited zircons of the quartz diorite in the Dongguashan intrusion gave ages of 2.40–2.50 Ga, 1.95–2.05 Ga and 0.74–0.81 Ga, coming from ultramafic, mafic and andesitic igneous rocks, and this indicates that there may have been three periods (2.4, 2.0, and 0.8 Ga) of magmatic activity in the Tongling district.  相似文献   

18.
Nickel-, copper-, and platinum group element (PGE)-enriched sulphide mineralization in large igneous provinces has attracted numerous PGE studies. However, the distribution and behavior of PGEs as well as the history of sulphide saturation are less clear in oxide-dominated mineralization. Platinum group elements of oxide-bearing layered mafic intrusions from the Emeishan large igneous province are examined in this study. Samples collected from the Baima and Taihe oxide-bearing layered gabbroic intrusions reveal contrasting results. The samples from Baima gabbroic rocks have low total PGE abundances (ΣPGE < 4 ppb) whereas the Taihe gabbroic rocks, on average, have more than double the concentration but are variable ranging from ΣPGE < 2 ppb to ΣPGE ∼300 ppb. The Baima gabbro is platinum-subgroup PGE (PPGE = Rh, Pt and Pd) enriched and iridium-subgroup PGE (IPGE = Os, Ir and Ru) depleted, with a distinct positive Ru anomaly on a primitive mantle normalized multi-element plot. The Taihe gabbros are also PPGE enriched but with negative Ru and Pd anomalies on a primitive mantle normalized multi-element plot. The PGE concentrations of Baima rocks are indicative of fractionation of a relatively evolved, mafic, S-undersaturated parental magma that was affected by earlier sulphide segregation. In contrast, the Taihe rocks record evidence of both S-saturated and S-undersaturated conditions and that the parental magma was likely emplaced very close to S-saturation. Comparisons of the platinum group element contents in the Emeishan flood basalts and the Emeishan oxide-bearing intrusions suggest that the PGE budget in a magma is not controlled by magma series (high-Ti vs. low-Ti), but very much by crustal contamination. The unlikelihood of substantial crustal contamination in the Taihe magma allowed the magma to remain S-undersaturated for a longer duration. PGE and sulphide mineralization was not identified in the Taihe intrusion but the presence of one PGE-enriched sample (Pt + Pd = ∼300 ppb) suggests that the parental magma likely did not experience sulphide segregation and is a potential target for further prospecting.  相似文献   

19.
Hydrothermal vein-type deposits of the Kabadüz region (Ordu, NE-Turkey) are located in Upper Cretaceous andesitic–basaltic rocks and were formed in fault zones along NW–SE direction lines, with thicknesses varying between a few centimetres up to 2 m. The primary mineral paragenesis of the many different ore veins consists of pyrite, chalcopyrite, sphalerite, galena and tetrahedrite–tennantite, with quartz and lesser amounts of calcite and barite as gangue minerals. Electron microprobe analyses indicate that the sphalerite and tetrahedrite–tennantite have low Fe contents, with values less than 3.37 wt.% and 1.56 wt.%, respectively. The very low Ni and Co contents of the pyrites (< 0.04 wt.%) and the Zn/Cd ratio of the sphalerite (~ avg. 100) indicate that the hydrothermal solutions were related to felsic magmatic activity. The homogenisation temperatures and calculated salinity data vary between 180–436 °C and 0.4–14.7 NaCl % eq., respectively. A well-defined negative correlation between the Th and the salinity data suggests that meteoric water was involved in the hydrothermal solutions. Based on the measured first melting temperatures, CaCl2, MgCl2, NaCl and KCl were dominant in the fluid inclusions. The δ34S compositions of the pyrite, chalcopyrite, sphalerite, and galena mineral separates of the investigated ore veins were measured at between 2.14 and − 1.47‰, and the oxygen and hydrogen isotope compositions varied between 7.8–8.5‰ and − 40 − 57‰, respectively. Based on the sulphur, oxygen and hydrogen isotope compositions, magmatic sources were confirmed for the hydrothermal solutions. Taking into account all of the above data and the granitic intrusions around the area, we concluded that younger granitic intrusions were responsible for the ore mineralisation around the Kabadüz region.  相似文献   

20.
The Siah-Kamar porphyry Mo deposit, located in the western Alborz-Azarbayjan magmatic belt, is the first and largest Mo deposit in the Iran. This deposit is mainly hosted by an I-type, shoshonitic quartz monzonite to monzonite intrusion and also extends in the surrounding lower to middle Eocene volcanic rocks. The geochemical features of the Siah-Kamar intrusion show enrichment in large-ion lithophile elements (LILE) and light rare earth elements (LREE), and significant negative anomalies of Nb, Ta and Ti analogues to the magmas derived from metasomatized sub-continental mantle. Porphyry molybdenum mineralization is associated with potassic, sericitic, argillic, and propylitic alteration zones. Mineralization occurs in disseminated form, in veins/veinlets and in hydrothermal breccias. The main ore minerals comprise molybdenite, chalcopyrite and bornite. The Microthermometric analyses at Siah-Kamar deposit showed that the halite-bearing inclusions contain high salinity (30.9–60.7 wt% NaCl eq.) with homogenization temperature ranging from 226 °C to 397 °C. The homogenization temperature of two phase liquid-rich inclusions range between 224 °C and 375 °C. The salinity of this type inclusions range from 0.6 to 7.5 wt% NaCl equivalent. The two-phase vapor-rich fluid inclusions homogenized at 270 °C to 397 °C. The salinity of this type fluid inclusions lie within the range of 0.6 to 4.24 wt% NaCl equivalent. Coexisting two phase V-rich and L-rich fluid inclusions in quartz associated with molybdenite provide evidence for boiling at 270 °C to 400 °C. The δ18Owater values of quartz in the molybdenite-bearing veins vary from +2.16 to +4.05‰, suggesting a magmatic origin for the ore-forming fluids. Re-Os isotopic dating of molybdenite indicated a mineralization age of 41.9 ± 3.6 Ma. The Re concentration in molybdenite suggests incorporation of mantle derived melt with crustal materials. The late Eocene magmatism along the western Alborz-Azarbayjan magmatic zone resulted from the Neo-Tethys subduction beneath the Iranian plateau. The Siah-Kamar monzonitic intrusion hosting the Mo deposit, could be considered as an example among the late Eocene intrusions within the western Alborz-Azarbayjan magmatic zone for any further exploration in this zone.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号