共查询到20条相似文献，搜索用时 343 毫秒
1.
Subaqueous pyroclastic flows and ignimbrites: an assessment 总被引：2，自引：0，他引：2
An assessment of the literature on subaqueous pyroclastic flows and their deposits shows that the term pyroclastic flow is frequently used loosely to describe primary, hot gas-rich pyroclastic flows, mass-flows which resulted from the transformation of gassupported flows into water-supported ones, and secondary mass-flows carrying redeposited pyroclastic debris. Based on subaerial pyroclastic flows, the term pyroclastic flow should be restricted to demonstrably hot, gas-rich mass-flows of pyroclastic debris. Using this definition, very few examples of subaqueous pyroclastic deposits with evidence for hot emplacement and of having been wholly submerged have been described. In the majority of these cases, the evidence for a hot state of emplacement and for the subaqueous nature of the host depositional environment is inadequate. The only unequivocal cases of hot pyroclastic flow deposits with adequate supporting evidence are the Ordovician nearshore, shallow marine ignimbrites of Ireland and Wales, and Miocene ignimbrites of southwest Japan, resulting from the passage of subaerially erupted pyroclastic flows into shallow water. Other possible examples are near-vent dense clast deposits in the Donzurobo Formation of Japan, possible submarine intra-caldera ponded ignimbrite successions in California and Wales, and near-vent pumiceous deposits of Ramsay Island, Wales. All other purported cases are either clearly the result of water-supported mass-flow transportation and deposition (debris avalanches, debris flows, turbidity currents), or lack adequate supporting evidence regarding the heat state or the palaeoenvironment. Only the shallow marine ignimbrites of Ireland and Wales show adequate evidence of welding, but even these could have been nearly wholly exposed above sea-level when welding occurred. We conclude that when pyroclastic flows enter water they are generally disrupted explosively and/or ingest water and transform into water-supported mass-flows, and we suggest the various scenarios in which this occurs. There is no evidence to suggest that welding in wholly subaqueous environments is common. 相似文献
2.
Internal structure and occurrence of accretionary lapilli — a case study at Laacher See Volcano 总被引：1，自引：0，他引：1
Accretionary lapilli are common in fine-grained pyroclastic flow and surge deposits and related co-ignimbrite/co-surge ash layers of Laacher See volcano. Two morphologically different types are distin-guished: (1) Rim-type lapilli are composed of a coarse-grained core surrounded by a fine-grained rim. Rims are internally graded or made up of several layers of alternating fine and very-fine grained ash. (2) Core-type lapilli lack fine-grained rims. Field relationships, internal, and grain-size characteristics are specific to accretionary lapilli from different types of tephra deposits. Accretionary lapilli may therefore be a helpful tool to infer the origin of tephra of different origin. In co-ignimbrite ashfall, accretionary lapilli are generally concentrated at the base, whereas pyroclastic flow and surge deposits contain lapilli in the upper parts of individual, thin-bedded layers. Rim-type lapilli are found in pyroclastic flow and surge deposits up to 4 km from the source. Core-type lapilli occur at greater distances or are associated with vesiculated tuffs where they are within 1 km from the vent. Accretionary lapilli from co-ignimbrite/co-surge ash show open framework textures and edge-to-face contacts of individual ash particles. Vesicularity is generally low but the overall porosity of 40% to 50% results in an average density of 1200 kg/m3. Accretionary lapilli in pyroclastic flow and surge deposits are more densely packed and platy particles are often in face-to-face contacts. Vesicularity of those from pyroclastic flow deposits is significantly higher; the overall porosity is about 30% to 40% and the average density 1600 kg/m3. Grain-size analyses show that the accretionary lapilli in co-ignimbrite/co-surge ashfall deposits are the most fine-grained with a median (Md) of 20 to 30 m and a maximum grain size of 250 to 350 m. Accretionary lapilli from pyroclastic flow deposits have intermediate Md-values of 30 to 50 m and a maximum grain size of 350 to 500 m. Those of surge deposits are the coarsest grained with Md-values of 30 to >63 m and a maximum grain size up to 2 mm. 相似文献
3.
ma n n¶rt;u u¶rt; u, m um u umuu ¶rt; amaa n nu , a¶rt;a n n a m. am nua ¶rt;a aau a¶rt;u n uumaa u ummna a ¶rt;u amuu 1965–1970
. mama u¶rt;, m na an amua ¶rt;mam ¶rt; m, m um n¶rt;um ¶rt;mam mm. 相似文献
4.
Valley-fill ignimbrites of the Middle Laacher See Tephra (MLST) in the proximal depositional fan south of Laacher See volcano are laterally continuous with fine-grained overbank-facies deposits, 0.5–1.5 m thick, covering higher elevations and interfluves between the paleovalleys. The overbank deposits consist of up to 12 ash layers, each 4–10 cm thick, which show internal structures typical of ash-flow transport, such as poor sorting, reverse size-grading of pumice, local normal grading of coarse ash-sized lithics above a fine-grained basal layer, cross-stratification behind obstacles, and erosional unconformities. Thickness, median grain-size, and number of individual layers decrease systematically with distance from the vent. Overbank ash layers thicken at the valley slopes and form discrete valley-fill ignimbrite flow units in the paleochannels with median grain size increasing from 63 m to 350 m. Toward the center of paleochannels, however, the well-defined overbank facies is obscured by mutual erosion of individual flow units. Overlapping data fields in ternary grain-size variation diagrams indicate the overbank facies to have evolved from ash flows chiefly through depletion of lapilli and coarse ash. Overbank-facies ash layers do not represent dust layers resulting from elutriation clouds of ash flows (co-ignimbrite ash) or surge deposits developed on higher ground due to low concentration of solids. They are similar in some parameters to Taupo-type ignimbrite veneer deposits, but are interpreted differently. The thin, fine-grained, Laacher See ash layers are thought to have been deposited from diluted portions of the flow proceeding directly from the eruption column while the main pyroclastic flows were confined to the paleovalleys radiating away from the eruptive center. The wide distribution of the thin ash layers is attributed to the balance of deposition from various flow parts and turbulent entraining and heating of ambient air that sustained sufficient mobility of the diluted flows to spread across hills and level ground. 相似文献
5.
A model is presented for the emplacement of intermediate volume ignimbrites based on a study of two 6 km3 volume ignimbrites on Roccamonfina Volcano, Italy. The model considers that the flows were slow moving, and quickly deflated from turbulent to non-turbulent conditions. Yield strength and density increased whereas fluidisation decreased with time and runout of the pyroclastic flows. In proximal locations, on the caldera rim, heterogeneous exposures including discontinuous lithic breccias, stratified and cross-stratified units interbedded with massive ignimbrite suggest deposition from turbulent flows. In medial locations thick, massive ignimbrite occurs associated with three types of co-ignimbrite lithic breccia which we interpret as being emplaced by non-turbulent flows. Multiple grading of different breccia/lithic concentration types within single flow units indicates that internal shear occurred producing overriding or overlapping of the rear of the flow onto the slower-moving front part. This overriding of different parts of non-turbulent pyroclastic flows could be caused by at least two different mechanisms: (1) changes in flow regime, such as hydraulic jumps that may occur at breaks in slope; and (2) periods of increased discharge rate, possibly associated with caldera collapse, producing fresh pulses of lithic-rich material that sheared onto the slower-moving part of the flow in front.We propose that ground surge deposits enriched in pumice compared with their associated ignimbrite probably formed by a flow separation mechanism from the top and front of the pyroclastic flow. These turbulent clouds moved ahead of the non-turbulent lower part of the flow to form stratified pumice-rich deposits. In distal regions well-developed coarse, often clast-supported, pumice concentrations zones and coarse intra-flow-unit lithic concentrations occur within the massive ignimbrite. We suggest that the flows were non-turbulent, possessed a relatively high yield strength and may have moved by plug flow prior to emplacement. 相似文献
6.
Daniela Řezáčová Sněžana Todorova Рецензенm J Bednář 《Studia Geophysica et Geodaetica》1987,31(4):397-403
nuam aau ¶rt; amu a um ¶rt; ¶rt;a uauu. ¶rt; ¶rt;a, ¶rt;mu auumu m mnam u nu mum ¶rt;a, umam m ¶rt;u z aa n¶rt; uuu, a aau. u¶rt; auum ¶rt;au z naa m mauu ¶rt; amu, naam, m ¶rt;au ¶rt;z naa zauuam u amu ¶rt;.
Summary A formation of ice particles on artificial deposition INis described. INacting in dependence on the temperature and supersaturation over the ice are considered in the 1 D SSconvection cloud model with detailed microphysics including freezing. The limiting influence of the water vapour pressure upon the concentration of active INis shown resulting from the dependence of water vapour pressure on the ice particle concentration.相似文献
7.
Summary The partial differential equations of electromagnetic induction in a 3-D Earth of inhomogeneous conductivity are reduced to a system of ordinary differential equations of the 2nd order for the spectral coefficients of the field.
au am nu¶rt; ¶rt; maum u¶rt;uu u m ¶rt;¶rt; n n¶rt;umu n¶rt; um ¶rt;uua au m n¶rt;a ¶rt; nma uum n.相似文献
8.
Summary The optimization of the method of determining the addition constant of an EDM is discussed. The advantages of the optimization procedure from the point of view of efficiency and improvement of accuracy are reported.
nuuu ¶rt; n¶rt;u a¶rt;¶rt;uu n ¶rt;. u nu n u uu u nu u.相似文献
9.
Summary The effect of an irregular contact of two different rock types on the surface heat flow was analysed for the Zlatý Kopec region in northwest Bohemia. The 2-D geothermal model of subsurface structures was compiled according to measured values of the thermal conductivity and heat sources and by using isobaths map of the metamorphite-granite boundary. The heat flow was computed numerically from the temperature distribution obtained as a finite-difference solution of the heat conduction equation. It was found that the heat flow variation, corresponding to the most probable model, amounts approximately to the half of the actually observed changes. The surface heat flow is affected strongly by the thermal conductivity contrast between the overlying metamorphites and underlying granites and, on the contrary, it is little sensitive to the heat production difference between both rock types. It seems, therefore, that, despite the big heat production contrast observed, the main source of the heat flow variability are thermal conductivity inhomogeneities.
¶rt;am uu mama ¶rt; m¶rt; mun n¶rt; a nm mn nm ¶rt; amu am n ana¶rt; uu. a u au mnn¶rt;mu u mnauu u n amu aauauaum — mauu n¶rt; a maa ¶rt;a ¶rt; nunm mm. n nm auma n -am u au mnn¶rt;mu. mam ¶rt;m, m auau mn nma ma a m ¶rt;u, n¶rt;mam nuuum nu a¶rt;a uu. a nm m u um aua mnn¶rt;mu ¶rt; aauu mauuu n¶rt;au u uaauaum, u am, nm a mum auu mnauu ¶rt; muu n¶rt;au. aum, m, m a a¶rt;a au mnauu,a umu auau mn nma m ¶rt;¶rt;mu uma mnn¶rt;mu.相似文献
10.
Zinzuni Jurado-Chichay Scott K. Rowland George P. L. Walker 《Bulletin of Volcanology》1996,57(7):471-482
Pyroclastic cones along the southwest coast of Mauna Loa volcano, Hawai'i, have a common structure: (a) an early formed circular outer rim 200–400 m in diameter composed mostly of scoria and lapilli, and (b) one or more later-formed inner rims composed almost exclusively of dense spatter. The spatter activity locally fed short lava flows that ponded within the outer rims. Based on various lines of evidence, these cones are littoral in origin: relationships between the cones and associated flows; the degassed nature of the pyroclasts; and (although not unequivocal) the position of the cones relative to known eruptive vent locations on Mauna Loa. Additional support for the littoral interpretation comes from their similarity to (smaller) littoral cones that have been observed forming during the ongoing Kilauea eruption. The structure of these Mauna Loa cones, however, contrasts with that of standard Hawaiian littoral cones in that there is (or once was) a complete circle of pyroclastic deposits. Furthermore, they are large even though associated with tubefed phoehoe flows instead of 'a'. The following origin is proposed: An initial flow of tube-fed phoehoe into the ocean built a lava delta with a base of hyaloclastite. Collapse of an inland portion of the active tube into the underlying wet hyaloclastites or a water-filled void allowed sufficient mixing of water and liquid lava to generate strong explosions. These explosions broke through the top of the flow and built up the outer scoria/lapilli rims on the solid carapace of the lava delta. Eventually, the supply of water diminished, the explosions declined in intensity to spattering, and the initial rim was filled with spatter and lava. 相似文献
11.
n¶rt;m u u¶rt; umnu n-a nmam, ma ¶rt;mm n¶rt; u (auum m um ¶rt;uam, aum ua¶rt;m umnua uu). ¶rt;a nu¶rt;um nmu u¶rt; ma umnu u m ma. 相似文献
12.
a au ¶rt;a a¶rt;u naam, m m uu anau n m aum u m u. aam u¶rt;a nuuu u u au am nmu m au. ¶rt;m nu¶rt;umu, m m m a mu u. n¶rt;mauau auumu aama u¶rt;a u um ¶rt; um aamu. 相似文献
13.
Summary The application of Maslov asymptotic theory in a general 3-D mixed subspace of 6-D complex phase space is proposed to obtain the integral superpositions of Gaussian packets and beams. The ray method and the superposition of plane waves (Maslov method of Chapman and Drummond [7]) are special limiting cases of the above mentioned approach. The same high-frequency asymptotic expansion formulae for seismic body waves were derived previously in [8] using the Gaussian beam method.
uu aunmmu muu aa m a n¶rt;nmam mu a nmama n¶rt; ¶rt; nu uma nnuu a nam u n. nnuu nu u m¶rt; m nuau n¶rt;u au n¶rt; n¶rt;¶rt;a. a amm aunmmuu u a n m¶rt; a n [8].相似文献
14.
Summary Some regularization approaches to downward heat flow continuation from the Earth's surface to the depth of interest are presented, provided the heat transfer is described by the homogeneous steady-state equation. The Fourier transform of horizontal coordinates is used and the relation between the regularization of the heat flow spectrum and the regularization of the heat flow in the spatial domain are discussed. The utilization of an a priori information about the subsurface heat flow is mentioned.
¶rt; m zuau n¶rt;¶rt; n¶rt;u u nmz mnz nma n¶rt;nuu, m n mna nuam ¶rt;¶rt; maua au (au anaa). na naau zuma ¶rt;uam u ama ¶rt; zuau mnz nma u uau z nma. nma m nuu anu u n¶rt;nmz mnz nma.相似文献
15.
mam u¶rt;m uu aumuu a m n uamu ¶rt;u nmu umu ¶rt;ua a maum ¶rt;a amu u. a um naa nu nu naama umuu , au a um aumu m n aau umuu mau aum n. aam, m mum au ¶rt;-amu a ma mu aum u u n a aumu m n. 相似文献
16.
The April 16, 1991, eruption of Volcán de Colima represents a classical example of partial dome collapse with the generation of progressively longer-runout, Merapi-type pyroclastic flows that traveled up to 4 km along the El Cordoban gullies (East, Central and West). The flows filled the gullies with block-and-ash flow deposits up to 10 m thick, of which, after 7 years of erosion, only remnants remained in the El Cordoban West and East gullies. The El Cordoban Central gully, however, provided a well-preserved and incised longitudinal section of the 1991 deposits. The deposits were emplaced as proximal and distal facies, separated by a change in slope angle from >30° to <20°. The proximal facies consists of massive, clast-supported flow units (up to 1 m thick) with andesite blocks locally supported by a matrix of coarse ash and devoid of segregation structures or grading. The distal facies consists of a massive, matrix-supported deposit up to 8 m thick, which contains dispersed andesite blocks in a fine ash matrix. In the distal facies, a train of blocks marks flow-unit upper boundaries and, although sorting is poor, some grading is present. Thin, finely stratified, or dune-bedded layers of fine ash material are locally present above or below units of both facies. Sedimentologic parameters show that the size or fraction of large pyroclasts (larger than –1 ) decreases from proximal to distal facies, as the percentage of matrix (0 to 4 ) increases, especially immediately beyond the break in slope. We propose that the propagation of the Colima pyroclastic flows is critically dependent on local slope angle, the presence of erodible slope debris, and the decrease in grain size with distance from the vent. The progressive fining is probably caused by some combination of erosion, clast breakup and deposition of larger pyroclasts, and is itself influenced by the slope angle. In the proximal region, the flows moved as granular avalanches, in which interacting grains ground each other and erosion occurred to produce an overriding dilute ash cloud. The maximum runout distance of the avalanches was controlled by the angle of repose of the material, and the volume and grain size of source and eroded material. Because the slope angle is close to the repose angle for this debris, granular avalanches were not able to propagate far beyond the change in slope. If, however, an avalanche had enough mass in finer grain size fractions, at least part of the flow continued beyond the break in slope and across the volcano apron, propagating in a turbulent state and depositing surge layers, or in an otherwise settling-modified state and depositing block-and-ash flow layers.Editorial responsibility: T Druitt 相似文献
17.
Summary Localization errors made by approximating a given medium by a homogeneous rectangular block model and due to the approximative solution of two-point ray tracing are estimated for four different structures. The separate influence of the individual characteristics of the medium is discussed. The iterative Geiger method supplemented by a generalized inversion of the damped least-squares and Marquardt algorithm is used for localizating five hypothetical hypocentres using 9 stations. Travel times in the original structures, used as input data for localization, are calculated using a special ray tracing system.
am uu auauu a annuau a ¶rt; ¶rt; ma u ma ¶rt;¶rt; u annuau m a ¶rt; munau nuuum .相似文献
18.
Summary A simple method of calculating fluxes and intensities (both spectral and integral) of radiation in the spectral region 0.29–4 in troposphere and lower stratosphere is proposed. This method allows to calculate with satisfactory accuracy the mean radiative regime of real atmosphere and to solve a wide range of problems both atmosphere-optical and thermal with arbitrary receivers of radiation. ( ) 0.29–4 . , . 相似文献
19.
Summary Drawing on papers [4, 5] a semi-quantitative model of filtration and resonance of a linearly polarized HM-wave has been constructed in a horizontally stratified Earth atmosphere. The wave is filtered in a system of 3 homogeneous layers, limited by two halfspaces. Attenuation of the wave is only assumed in the lower layer, i.e. in the ionosphere. A relation has been derived for the amplitude coupling factor HT/HF expressing the absolute ratio of the amplitude of the wave after transmission through the system of layers and the amplitude of the wave, incident at the system of layers. The mechanism of geomagnetic pulsations is illustrated on the principle of the resonance of a HM-wave in the Earth's magnetosphere. The magnetosphere has been replaced by the said system of layers, and the dependence of HT/HF=f() on the parameters of the system of layers has been studied using a computer. 相似文献
20.
Summary Review has been made of the first results and perspectives of investigations in geophysics and bordering sciences (geology, geography, agrobiology, etc.) by means of manned orbital space laboratories. Relatively detailed discussion is given to the problems of the interpretation of terrain feature pictures from space. Attentively considered are the technique and results of the photometric processing of atmospheric photographs near the horizon with the purpose of studying atmospheric optical non-homogeneities (in particular, aerosol layers). The possible investigations based on the use of data about the outgoing radiation spectra are mentioned. (, , .) . . ( , ) . . 相似文献