首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Rigorous and objective testing of seismic hazard assessments against the real seismic activity must become the necessary precondition for any responsible seismic risk estimation. Because seismic hazard maps seek to predict the shaking that would actually occur, the reference hazard maps for the Italian seismic code, obtained by probabilistic seismic hazard assessment (PSHA), and the alternative ground shaking maps based on the neo-deterministic approach (NDSHA), are cross-compared and tested against the real seismicity for the territory of Italy. The comparison between predicted intensities and those reported for past earthquakes shows that models generally provide rather conservative estimates, except for PGA with 10 % probability of being exceeded in 50 years, which underestimates the largest earthquakes. In terms of efficiency in predicting ground shaking, measured accounting for the rate of underestimated events and for the territorial extent of areas characterized by high seismic hazard, the NDSHA maps appear to outscore the PSHA ones.  相似文献   

2.
The use of recent ground motion prediction equations in probabilistic seismic hazard analysis (PSHA) with area type of seismic sources requires defining the probability distributions of various source-to-site distance metrics with finite fault rupture taken into account. This task is rendered very difficult due to large epistemic uncertainties involved in specifying the details of the causative faults for area sources of diffused seismicity. However, it may generally be possible to constrain the strike and dip angles for fault ruptures in area sources from regional seismotectonic and geological information. This paper proposes to estimate the various finite fault distance measures from a site to a location in an area source by averaging the distances for several fault rupture scenarios with randomly distributed strike and dip over specified ranges. To consider the spatial distribution of the seismicity, the paper then provides the guidelines for defining the distance distributions by assigning suitable weight factors to the distance estimates for a grid of locations in the source area. The PSHA computation based on the distance distributions thus defined is shown to provide quite realistic and objective estimate of the hazard.  相似文献   

3.
Kijko  A.  Retief  S. J. P.  Graham  G. 《Natural Hazards》2002,26(2):175-201
In this part of our study the probabilistic seismic hazard analysis (PSHA) for Tulbagh was performed. The applied procedure is parametric and consists essentially of two steps. The first step is applicable to the area in the vicinity of Tulbagh and requires an estimation of the area-specific parameters, which, in this case, is the mean seismic activity rate, , the Gutenberg-Richter parameter, b, and the maximum regional magnitude, mmax. The second step is applicable to the Tulbagh site, and consists of parameters of distribution of amplitude of the selected ground motion parameter. The current application of the procedure provides an assessment of the PSHA in terms of peak ground acceleration (PGA) and spectral acceleration (SA). The procedure permits the combination of both historical and instrumental data. The historical part of the catalogue only contains the strongest events, whereas the complete part can be divided into several subcatalogues, each assumed complete above a specified threshold of magnitude. In the analysis, the uncertainty in the determination of the earthquake was taken into account by incorporation of the concept of `apparent magnitude'. The PSHA technique has been developed specifically for the estimation of seismic hazard at individual sites without the subjective judgement involved in the definition of seismic source zones, when the specific active faults have not been mapped or identified, and where the causes of seismicity are not well understood. The results of the hazard assessment are expressed as probabilities that specified values of PGA will be exceeded during the chosen time intervals, and similarly for the spectral accelerations. A worst case scenario sketches the possibility of a maximum PGA of 0.30g. The results of the hazard assessment can be used as input to a seismic risk assessment.  相似文献   

4.
The region of interest is characterized by incomplete data sets and little information about the tectonic features. Therefore, two methodologies for estimating seismic hazard were used in order to elucidate the robustness of the results: the method of spatially smoothed seismicity introduced by Frankel (1995) and later extended by Lapajne et al. (1997) and a Monte Carlo approach presented by Ebel and Kafka (1999). In the first method, fault-rupture oriented elliptical Gaussian smoothing was performed to estimate future activity rates along the causative structures. Peak ground accelerations were computed for a grid size of 15 km × 415 km assuming the centre of the grids as epicentres, from which the seismic hazard map was produced. The attenuation relationship by Ambraseys et al. (1996) was found suitable for the region under study. PGA values for 10% probability of exceedence in 50 years (return period of 475 years) were computed for each model and a combined seismic hazard map was produced by subjectively assigning weights to each of these models. A worst-case map is also obtained by picking the highest value at each grid point from values of the four hazard maps. The Monte Carlo method is used to estimate seismic hazard, for comparison to the results from our previous approach. Results obtained from both methods are comparable except values in the first set of maps estimate greater hazard in areas of low seismicity. Both maps indicate a higher hazard along the main tectonic features of the east African and Red Sea rift systems. Within Eritrea, the highest PGA exceeded a value 25% of g, located north of Red Sea port of Massawa. In areas around the capital, Asmara, PGA values exceed 10% of g.  相似文献   

5.
Seismic hazard assessment is the key tool for rational planning, safety and design of infrastructures in seismically vulnerable regions. Gujarat is the only state in peninsular India with the maximum seismic hazard of large shallow earthquakes originating from intra-plate seismicity. Probabilistic seismic hazard assessment (PSHA) of Gujarat is carried out in this paper. Three seismogenic sources, namely Kutch, Saurashtra and Mainland Gujarat, are considered, and seismicity parameters are estimated separately for each region taking into account the completeness of the available earthquake data. Peak ground acceleration (PGA) of the horizontal component and spectral acceleration at specific periods are considered as the intensity measures. Ground motion predictive equation chosen was reported to be based on simulated ground motions and verified against the strong motion records in the study region. Results are reported for the 17 major cities at the bedrock and also for the soil sites. Apart from hazard curves, 2475 and 475 years of return periods are considered for the PGA and uniform hazard spectra (UHS). The results are compared with the present recommendations of Indian Standards. Key observations include (1) Indian Standards underpredict PGA in the entire Gujarat when the soil sites are considered and in a few cities even at the bedrock; (2) amplification of PGA (or short period hazard) on account of soil sites should be included in the Indian Standard, which is currently absent; (3) shape of the UHS indicates that a separate amplification is required at the hyperbolic portion; and (4) ratio of 2475–475 years of PGA, which is considered 2.0 in Indian Standard, should be reduced to 1.5. Time-dependent recurrence model is also included in this paper and compared with conventional PSHA. General observations include that (1) hazard may increase significantly on account of time dependency; (2) this also influences the disaggregation and in turn the selection of ground motions; and (3) time since last earthquake significantly influences the extent of the effect of time dependency.  相似文献   

6.
In this paper, we present a probabilistic seismic hazard analysis (PSHA) for mainland Spain that takes into account recent new results in seismicity, seismic zoning, and strong ground attenuation not considered in the latest PSHA of the Spanish Building Code. Those new input data have been obtained as a three-step project carried out in order to improve the existing hazard map for mainland Spain. We have produced a new earthquake catalogue for the area, in which the earthquakes are given in moment magnitude through specific deduced relationships for our territory based on intensity data (Mezcua et al. in Seismol Res Lett 75:75–81, 2004). In addition, we included a new seismogenetic zoning based on the recent partial zoning studies performed by different authors. Finally, as we have developed a new strong ground motion model for the area García Blanco (2009), it was considered in the hazard calculation together with other attenuations gathered from different authors using data compatible with our region. With this new data, a logic tree process is defined to quantify the epistemic uncertainty related to those parts of the process. A sensitivity test has been included in order to analyze the different models of ground motion and seismotectonic zonation used in this work. Finally, after applying a weighting scheme, a mean hazard map for PGA, based on rock type condition for 10% exceedance probability in 50 years, is presented, including 15th and 85th percentile hazard maps. The main differences with the present official building code hazard map are analyzed.  相似文献   

7.
Seismic ground motion caused by earthquakes mainly affects the constructions and structures around its area of influence. In this context, the probabilistic seismic hazard analysis (PSHA) is a scientific step towards the safety analysis of any major construction such as nuclear power plant. Thus, the present study focused to estimate seismic hazard level at different probabilities for Kakrapar nuclear power plant located in the Western India. The hazard curves for the study area are developed following the procedure of PSHA suggested by Cornell–McGuire. Three source zones, Narmada-Tapti zone (NTZ), Rann of Kuchchh (ROK), and west passive margin (WPM), are classified on the basis of seismicity and tectonic setting of the study area. The estimated maximum magnitude (m max) for NTZ, ROK, and WPM are 6.9 ± 0.57, 6.5 ± 0.64, and 6.1 ± 0.64, respectively. Logic tree approach has been used for the development of hazard curves to account the epistemic uncertainties associated with the analysis. For maximum credible earthquake [MCE, i.e., the probability of exceedance of 2 % in 50 years (return period of ~2,500 years)], the peak spectral acceleration (i.e., PSA at 0.2 s) expected around 5 km of the Kakrapar nuclear power plant (site) is 0.23 g from all source zones; however, at exact site location, it is 0.18 g. The PSA values due to NTZ, ROK, and WPM based on MCE are 0.22, 0.065, and 0.052 g, respectively. In case of design-based earthquake (DBE, i.e., 50 % probability in 50 years (return period of ~110 years)), the calculated maximum spectral acceleration (SA) from all source zones is about 0.045 g. The PSA distribution for the DBE from the NTZ has reached a maximum value of 0.042 g; however, PSA for ROK and WPM is considerably low with a maximum value of 0.022 and 0.021 g, respectively. Considering the MCE and DBE, the estimated PSA at 0.2 s has a highest value of ~0.23 g from all source zones. Spectral accelerations (SAs) correspond to different periods are presented, and SA plots for NTZ zone can be considered as response spectra for the KAPS site. Deaggregation of PSHA in the present study is also discussed. PGA values reported in seismic zonation map and global seismic hazard analysis program around the present study area range from 0.05 to 0.2 g which is slightly lower than the peak acceleration obtained in this study. The results of this study would facilitate in the performance of the site-specific seismic probabilistic safety analysis.  相似文献   

8.
Intermediate-depth earthquakes in the Vrancea region occur in response to stress generation due to descending lithosphere beneath the southeastern Carpathians. In this article, tectonic stress and seismicity are analyzed in the region on the basis of a vast body of observations. We show a correlation between the location of intermediate-depth earthquakes and the predicted localization of maximum shear stress in the lithosphere. A probabilistic seismic hazard assessment (PSHA) for the region is presented in terms of various ground motion parameters on the utilization of Fourier amplitude spectra used in engineering practice and risk assessment (peak ground acceleration, response spectra amplitude, and seismic intensity). We review the PSHA carried out in the region, and present new PSHA results for the eastern and southern parts of Romania. Our seismic hazard assessment is based on the information about the features of earthquake ground motion excitation, seismic wave propagation (attenuation), and site effect in the region. Spectral models and characteristics of site-response on earthquake ground motions are obtained from the regional ground motion data including several hundred records of small and large earthquakes. Results of the probabilistic seismic hazard assessment are consistent with the features of observed earthquake effects in the southeastern Carpathians and show that geological factors play an important part in the distribution of the earthquake ground motion parameters.  相似文献   

9.
This article presents the results of deterministic and probabilistic seismic hazard analyses (DSHA and PSHA) of the city of Hamedan and its neighboring regions. This historical city is one of the developing cities located in the west of Iran. For this reason, the DSHA and PSHA approaches have been used for the assessment of seismic hazards and earthquake risk evaluation. To this purpose, analyses have been carried out considering the historic and instrumented earthquakes, geologic and seismotectonic parameters of the region covering a radius of 100?km, keeping Hamedan as the center. Therefore, in this research, we studied the main faults and fault zones in the study area and calculated the length and distance of faults from the center of Hamedan. In the next step, we measured the maximum credible earthquake (MCE) and peak ground acceleration (PGA) using both DSHA and PSHA approaches and utilized the various equations introduced by different researchers for this purpose. The results of DSHA approach show that the MCE-evaluated value is 7.2 Richter, which might be created by Nahavand fault activities in this region. The PGA value of 0.56?g will be obtained from Keshin fault. The results of PSHA approach show that the MCE-evaluated value is 7.6 Richter for a 0.64 probability in a 50-year period. The PGA value of 0.45?g will be obtained from Keshin fault. Seismic hazard parameters have been evaluated considering the available earthquake data using Gutenberg?CRichter relationship method. The ??a?? and ??b?? parameters were estimated 5.53 and 0.68, respectively.  相似文献   

10.
Probabilistic seismic hazard analysis for Bangalore   总被引：5，自引：3，他引：2  
This article presents the results of probabilistic seismic hazard analysis (PSHA) for Bangalore, South India. Analyses have been carried out considering the seismotectonic parameters of the region covering a radius of 350 km keeping Bangalore as the center. Seismic hazard parameter ‘b’ has been evaluated considering the available earthquake data using (1) Gutenberg–Richter (G–R) relationship and (2) Kijko and Sellevoll (1989, 1992) method utilizing extreme and complete catalogs. The ‘b’ parameter was estimated to be 0.62 to 0.98 from G–R relation and 0.87 ± 0.03 from Kijko and Sellevoll method. The results obtained are a little higher than the ‘b’ values published earlier for southern India. Further, probabilistic seismic hazard analysis for Bangalore region has been carried out considering six seismogenic sources. From the analysis, mean annual rate of exceedance and cumulative probability hazard curve for peak ground acceleration (PGA) and spectral acceleration (Sa) have been generated. The quantified hazard values in terms of the rock level peak ground acceleration (PGA) are mapped for 10% probability of exceedance in 50 years on a grid size of 0.5 km × 0.5 km. In addition, Uniform Hazard Response Spectrum (UHRS) at rock level is also developed for the 5% damping corresponding to 10% probability of exceedance in 50 years. The peak ground acceleration (PGA) value of 0.121 g obtained from the present investigation is slightly lower (but comparable) than the PGA values obtained from the deterministic seismic hazard analysis (DSHA) for the same area. However, the PGA value obtained in the current investigation is higher than PGA values reported in the global seismic hazard assessment program (GSHAP) maps of Bhatia et al. (1999) for the shield area.  相似文献   

11.
Probabilistic seismic hazard analysis (PSHA) is carried out for the archaeological site of Vijayapura in south India in order to obtain hazard consistent seismic input ground-motions for seismic risk assessment and design of seismic protection measures for monuments, where warranted. For this purpose the standard Cornell-McGuire approach, based on seismogenic zones with uniformly distributed seismicity is employed. The main features of this study are the usage of an updated and unified seismic catalogue based on moment magnitude, new seismogenic source models and recent ground motion prediction equations (GMPEs) in logic tree framework. Seismic hazard at the site is evaluated for level and rock site condition with 10% and 2% probabilities of exceedance in 50 years, and the corresponding peak ground accelerations (PGAs) are 0.074 and 0.142 g, respectively. In addition, the uniform hazard spectra (UHS) of the site are compared to the Indian code-defined spectrum. Comparisons are also made with results from National Disaster Management Authority (NDMA 2010), in terms of PGA and pseudo spectral accelerations (PSAs) at T = 0.2, 0.5, 1.0 and 1.25 s for 475- and 2475-yr return periods. Results of the present study are in good agreement with the PGA calculated from isoseismal map of the Killari earthquake, \({\hbox {M}}_{\mathrm{w}} = 6.4\) (1993). Disaggregation of PSHA results for the PGA and spectral acceleration (\({\hbox {S}}_{\mathrm{a}}\)) at 0.5 s, displays the controlling scenario earthquake for the study region as low to moderate magnitude with the source being at a short distance from the study site. Deterministic seismic hazard (DSHA) is also carried out by taking into account three scenario earthquakes. The UHS corresponding to 475-yr return period (RP) is used to define the target spectrum and accordingly, the spectrum-compatible natural accelerograms are selected from the suite of recorded accelerograms.  相似文献   

12.
The seismic hazard in the Sannio-Matese area has been worked out by a modification of the McGuire (1976) computing programme, taking into account the influence of nine potential seismic source zones.The method uses truncated-quadratic intensity-frequency distribution and azimuth-dependent intensity attenuation derived from isoseismal maps for each of the seismogenetic sources. A new modification has been introduced to take into account different decay of the intensity in the near (to VIII degree) and far (from VIII degree) field.Different assumptions about maximum possible intensities and truncation of intensity-frequency laws are used to evaluate the effects of the uncertainties on the computed hazard at high intensities. Intensities associated with different level of annual probability are computed for five test sites in the considered area. Maps displaying the expected intensity for a mean return period of 500 years (pa 0.002) are presented and compared with observed intensities.Presented at the XXIst General Assembly of the European Seismological Commission, Symposium on Methods of Seismic Hazard Assessment in Europe, Sofia, 23–27 August 1988.  相似文献   

13.
Northeast India is one of the most highly seismically active regions in the world with more than seven earthquakes on an average per year of magnitude 5.0 and above. Reliable seismic hazard assessment could provide the necessary design inputs for earthquake resistant design of structures in this region. In this study, deterministic as well as probabilistic methods have been attempted for seismic hazard assessment of Tripura and Mizoram states at bedrock level condition. An updated earthquake catalogue was collected from various national and international seismological agencies for the period from 1731 to 2011. The homogenization, declustering and data completeness analysis of events have been carried out before hazard evaluation. Seismicity parameters have been estimated using G–R relationship for each source zone. Based on the seismicity, tectonic features and fault rupture mechanism, this region was divided into six major subzones. Region specific correlations were used for magnitude conversion for homogenization of earthquake size. Ground motion equations (Atkinson and Boore 2003; Gupta 2010) were validated with the observed PGA (peak ground acceleration) values before use in the hazard evaluation. In this study, the hazard is estimated using linear sources, identified in and around the study area. Results are presented in the form of PGA using both DSHA (deterministic seismic hazard analysis) and PSHA (probabilistic seismic hazard analysis) with 2 and 10% probability of exceedance in 50 years, and spectral acceleration (T = 0. 2 s, 1.0 s) for both the states (2% probability of exceedance in 50 years). The results are important to provide inputs for planning risk reduction strategies, for developing risk acceptance criteria and financial analysis for possible damages in the study area with a comprehensive analysis and higher resolution hazard mapping.  相似文献   

14.
This work briefly discusses the main features of probabilistic seismic hazard analysis (PSHA). Special attention is paid to the identification and quantification of uncertainties related to seismic source characteristics and seismic engineering models for prediction of strong ground motions. The principal seismic models and the results of PSHA application for detailed seismic zoning of urban territories in Sakhalin Island are presented.  相似文献   

15.
Natural Hazards - The probabilistic seismic hazard analysis (PSHA) has been performed for Bangladesh using background seismicity, crustal fault, and subduction zone source models. The latest ground...  相似文献   

16.
A method based on Bayesian techniques has been applied to evaluate the seismic hazard in the two test areas selected by the participants in the ESC/SC8-TERESA project: Sannio-Matese in Italy and the northern Rhine region (BGN). A prior site occurrence model (prior SOM) is obtain from a seismicity distribution modeled in wide seismic sources. The posterior occurrence model (posterior SOM) is calculated after a Bayesian correction which, basically, recovers the spatial information of the epicenter distribution and considers attenuation and location errors, not using source zones. The uncertainties of the occurrence probabilities are evaluated in both models.The results are displayed in terms of probability and variation coefficient contour maps for a chosen intensity level, and with plots of mean return period versus intensity in selected test sites, including the 90% probability intervals.It turns out that the posterior SOM gives a better resolution in the probability estimate, decreasing its uncertainty, especially in low seismic activity regions.  相似文献   

17.
This study first presents the series of peak ground acceleration (PGA) in the three major cities in Taiwan. The PGAs are back-calculated from an earthquake catalog with the use of ground motion models. The maximums of the 84th percentile (mean?+?one standard deviation) PGA since 1900 are 1.03, 0.36, and 0.10?g, in Taipei, Taichung, and Kaohsiung, respectively. Statistical goodness-of-fit testing shows that the series of PGA follow a double-lognormal distribution. Using the verified probability distribution, a probabilistic analysis was developed in this paper, and used to evaluate probability-based seismic hazard. Accordingly, given a PGA equal to 0.5?g, the annual exceedance probabilities are 0.56, 0.46, and 0.23?% in Taipei, Taichung, and Kaohsiung, respectively; for PGA equal to 1.0?g, the probabilities become 0.18, 0.14, and 0.09?%. As a result, this analysis indicates the city in South Taiwan is associated with relatively lower seismic hazard, compared with those in Central and North Taiwan.  相似文献   

18.
Seismic hazard in terms of peak ground acceleration (PGA) has been evaluated in northern Algeria using spatially smoothed seismicity data. We present here a preliminary seismic zoning in northern Algeria as derived from the obtained results.Initially, we have compiled an earthquake catalog of the region taking data from several agencies. Afterwards, we have delimited seismic areas where the b and mmax parameters are different. Finally, by applying the methodology proposed by Frankel [Seismol. Res. Lett. 66 (1995) 8], and using four complete and Poissonian seismicity models, we are able to compute the seismic hazard maps in terms of PGA with 39.3% and 10% probability of exceedance in 50 years.A significant result of this work is the observation of mean PGA values of the order of 0.20 and 0.45 g, for return periods of 100 and 475 years, respectively, in the central area of the Tell Atlas.  相似文献   

19.
Probabilistic seismic hazard maps for the sultanate of Oman   总被引：2，自引：0，他引：2  
This study presents the results of the first probabilistic seismic hazard assessment (PSHA) in the framework of logic tree for Oman. The earthquake catalogue was homogenized, declustered, and used to define seismotectonic source model that characterizes the seismicity of Oman. Two seismic source models were used in the current study; the first consists of 26 seismic source zones, while the second is expressing the alternative view that seismicity is uniform along the entire Makran and Zagros zones. The recurrence parameters for all the seismogenic zones were determined using the doubly bounded exponential distribution except the zones of Makran, which were modelled using the characteristic distribution. Maximum earthquakes were determined and the horizontal ground accelerations in terms of geometric mean were calculated using ground-motion prediction relationships developed based upon seismic data obtained from active tectonic environments similar to those surrounding Oman. The alternative seismotectonic source models, maximum magnitude, and ground-motion prediction relationships were weighted and used to account for the epistemic uncertainty. Hazard maps at rock sites were produced for 5?% damped spectral acceleration (SA) values at 0.1, 0.2, 0.3, 1.0 and 2.0?s spectral periods as well as peak ground acceleration (PGA) for return periods of 475 and 2,475?years. The highest hazard is found in Khasab City with maximum SA at 0.2?s spectral period reaching 243 and 397?cm/s2 for return periods 475 and 2,475 years, respectively. The sensitivity analysis reveals that the choice of seismic source model and the ground-motion prediction equation influences the results most.  相似文献   

20.
The seismically active Northwest (NW) Himalaya falls within Seismic Zone IV and V of the hazard zonation map of India. The region has suffered several moderate (~25), large-to-great earthquakes (~4) since Assam earthquake of 1897. In view of the major advancement made in understanding the seismicity and seismotectonics of this region during the last two decades, an updated probabilistic seismic hazard map of NW Himalaya and its adjoining areas covering 28–34°N and 74–82°E is prepared. The northwest Himalaya and its adjoining area is divided into nineteen different seismogenic source zones; and two different region-specific attenuation relationships have been used for seismic hazard assessment. The peak ground acceleration (PGA) estimated for 10% probability of exceedance in 50 and 10 years at locations defined in the grid of 0.25 × 0.25°. The computed seismic hazard map reveals longitudinal variation in hazard level along the NW Himalayan arc. The high hazard potential zones are centred around Kashmir region (0.70 g/0.35 g), Kangra region (0.50 g/0.020 g), Kaurik-Spitti region (0.45 g/0.20 g), Garhwal region (0.50 g/0.20 g) and Darchula region (0.50 g/0.20 g) with intervening low hazard area of the order of 0.25 g/0.02 g for 10% probability in 50 and 10 years in each region respectively.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号