共查询到20条相似文献，搜索用时 31 毫秒
1.
In the present study, the seismic hazard in northern Algeria is estimated using both physical strain energy release and Gumbel's extreme values approaches. For six of the most industrial and populated cities in Algeria, seismic hazard is assessed and examined in greater detail. Gumbel's extreme values approach has been used to estimate seismic hazard in terms of magnitude and P.G.A at each point of an equispaced grid all over the north of Algeria. An average attenuation relationship for PGA has been provided using known relations which have been established in regions with similar attenuation characteristics.The results are presented mainly in the form of graphs and contour maps of magnitudes (respectively PGA) with a 60% probability of not being exceeded in the next 100 and 200 years. Globally, they give main features of northern Algeria in terms of zoning (as well as in terms of magnitude and in terms of PGA). They corroborate the ones obtained through other works, especially in the basin areas (Mitidja, Cheliff, Soumam and Constantine Basin). 相似文献
2.
Probabilistic seismic hazard analysis for Bangalore 总被引：5，自引：3，他引：2
This article presents the results of probabilistic seismic hazard analysis (PSHA) for Bangalore, South India. Analyses have
been carried out considering the seismotectonic parameters of the region covering a radius of 350 km keeping Bangalore as
the center. Seismic hazard parameter ‘b’ has been evaluated considering the available earthquake data using (1) Gutenberg–Richter (G–R) relationship and (2) Kijko
and Sellevoll (1989, 1992) method utilizing extreme and complete catalogs. The ‘b’ parameter was estimated to be 0.62 to 0.98 from G–R relation and 0.87 ± 0.03 from Kijko and Sellevoll method. The results
obtained are a little higher than the ‘b’ values published earlier for southern India. Further, probabilistic seismic hazard analysis for Bangalore region has been
carried out considering six seismogenic sources. From the analysis, mean annual rate of exceedance and cumulative probability
hazard curve for peak ground acceleration (PGA) and spectral acceleration (Sa) have been generated. The quantified hazard
values in terms of the rock level peak ground acceleration (PGA) are mapped for 10% probability of exceedance in 50 years
on a grid size of 0.5 km × 0.5 km. In addition, Uniform Hazard Response Spectrum (UHRS) at rock level is also developed for
the 5% damping corresponding to 10% probability of exceedance in 50 years. The peak ground acceleration (PGA) value of 0.121 g
obtained from the present investigation is slightly lower (but comparable) than the PGA values obtained from the deterministic
seismic hazard analysis (DSHA) for the same area. However, the PGA value obtained in the current investigation is higher than
PGA values reported in the global seismic hazard assessment program (GSHAP) maps of Bhatia et al. (1999) for the shield area. 相似文献
3.
Application of the Spatially Smoothed Seismicity and Monte Carlo Methods to Estimate the Seismic Hazard of Eritrea and the Surrounding Region 总被引：6，自引：0，他引：6
The region of interest is characterized by incomplete data sets and little information about the tectonic features. Therefore,
two methodologies for estimating seismic hazard were used in order to elucidate the robustness of the results: the method
of spatially smoothed seismicity introduced by Frankel (1995) and later extended by Lapajne et al. (1997) and a Monte Carlo approach presented by Ebel and Kafka (1999). In the first method, fault-rupture oriented elliptical
Gaussian smoothing was performed to estimate future activity rates along the causative structures. Peak ground accelerations
were computed for a grid size of 15 km × 415 km assuming the centre of the grids as epicentres, from which the seismic hazard
map was produced. The attenuation relationship by Ambraseys et al. (1996) was found suitable for the region under study. PGA values for 10% probability of exceedence in 50 years (return period
of 475 years) were computed for each model and a combined seismic hazard map was produced by subjectively assigning weights
to each of these models. A worst-case map is also obtained by picking the highest value at each grid point from values of
the four hazard maps. The Monte Carlo method is used to estimate seismic hazard, for comparison to the results from our previous
approach. Results obtained from both methods are comparable except values in the first set of maps estimate greater hazard
in areas of low seismicity. Both maps indicate a higher hazard along the main tectonic features of the east African and Red
Sea rift systems. Within Eritrea, the highest PGA exceeded a value 25% of g, located north of Red Sea port of Massawa. In
areas around the capital, Asmara, PGA values exceed 10% of g. 相似文献
4.
We estimate the energetic and spatial characteristics of seismicity in the Algeria–Morocco region using a variety of seismic and statistical parameters, as a first step in a detailed investigation of regional seismic hazard. We divide the region into five seismotectonic regions, comprising the most important tectonic domains in the studied area: the Moroccan Meseta, the Rif, the Tell, the High Plateau, and the Atlas. Characteristic seismic hazard parameters, including the Gutenberg–Richter b-value, mean seismic activity rate, and maximum possible earthquake magnitude, were computed using an extension of the Aki–Utsu procedure for incomplete earthquake catalogs for each domain, based on recent earthquake catalogs compiled for northern Morocco and northern Algeria. Gutenberg–Richter b-values for each zone were initially estimated using the approach of Weichert (Bull Seismol Soc Am 70:1337–1346, 1980): the estimated b-values are 1.04 ± 0.04, 0.93 ± 0.10, 0.72 ± 0.03, 0.87 ± 0.02, and 0.77 ± 0.02 for the Atlas, Meseta, High Plateau, Rif, and Tell seismogenic zones, respectively. The fractal dimension D 2 was also estimated for each zone. From the ratio D 2/b, it appears that the Tell and Rif zones, with ratios of 2.09 and 2.12, respectively, have the highest potential earthquake hazard in the region. The Gutenberg–Richter relationship analysis allows us to derive that in the Tell and Rif, the number of earthquake with magnitude above Mw 4.0, since 1925 normalized to decade and to square cell with 100-km sides is equal to 2.6 and 1.91, respectively. This study provides the first detailed information about the potential seismicity of these large domains, including maximum regional magnitudes, characteristics of spatial clustering, and distribution of seismic energy release.
相似文献5.
In this part of our study the probabilistic seismic hazard analysis (PSHA) for Tulbagh was performed. The applied procedure is parametric and consists essentially of two steps. The first step is applicable to the area in the vicinity of Tulbagh and requires an estimation of the area-specific parameters, which, in this case, is the mean seismic activity rate, , the Gutenberg-Richter parameter, b, and the maximum regional magnitude, mmax. The second step is applicable to the Tulbagh site, and consists of parameters of distribution of amplitude of the selected ground motion parameter. The current application of the procedure provides an assessment of the PSHA in terms of peak ground acceleration (PGA) and spectral acceleration (SA). The procedure permits the combination of both historical and instrumental data. The historical part of the catalogue only contains the strongest events, whereas the complete part can be divided into several subcatalogues, each assumed complete above a specified threshold of magnitude. In the analysis, the uncertainty in the determination of the earthquake was taken into account by incorporation of the concept of `apparent magnitude'. The PSHA technique has been developed specifically for the estimation of seismic hazard at individual sites without the subjective judgement involved in the definition of seismic source zones, when the specific active faults have not been mapped or identified, and where the causes of seismicity are not well understood. The results of the hazard assessment are expressed as probabilities that specified values of PGA will be exceeded during the chosen time intervals, and similarly for the spectral accelerations. A worst case scenario sketches the possibility of a maximum PGA of 0.30g. The results of the hazard assessment can be used as input to a seismic risk assessment. 相似文献
6.
Probabilistic seismic hazard of Pakistan, Azad-Jammu and Kashmir 总被引：2，自引：2，他引：0
The seismic hazard study for Pakistan and Azad Jammu and Kashmir has been conducted by using probabilistic approach in terms
of peak ground acceleration (PGA) in m/s2 and also seismic hazard response spectra for different cities. A new version of Ambraseys et al. (Bull Earthq Eng 3:1–53,
2005) ground acceleration model is used, and parameterization is based on most recent updated earthquake catalogs that consisted
of 14,000 events. The threshold magnitude was fixed at M
w 4.8, but seismic zones like northern Pakistan–Tajikistan, Hindukush and northern Afghanistan–Tajikistan border had M
w 5.2. The average normalized ‘a’ and ‘b’ values for all zones are 6.15 and 0.95, respectively. Seismicity of study area was modeled, and ground motion was computed
for eight frequencies (0.025, 0.1, 0.2, 0.5, 1.0, 1.5, 2.0, 2.5 s) for different annual exceedance rates of 0.02, 0.01, 0.005,
0.002 and 0.001 (return periods 50, 100, 200, 500 and 1,000 years) for stiff rocks at the gridding of 0.1° × 0.1°. Seismic
hazard maps based on computed PGA for 0.02, 0.01 and 0.002 annual exceedance are prepared. These maps indicate the earthquake
hazard of Pakistan and surrounding areas in the form of acceleration contour lines, which are in agreement with geological
and seismotectonic characteristics of the study area. The maximum seismic hazard values are found at Muzaffarabad, Gilgit
and Quetta areas. 相似文献
7.
The cumulative distribution function (CDF) of magnitude of seismic events is one of the most important probabilistic characteristics in Probabilistic Seismic Hazard Analysis (PSHA). The magnitude distribution of mining induced seismicity is complex. Therefore, it is estimated using kernel nonparametric estimators. Because of its model-free character the nonparametric approach cannot, however, provide confidence interval estimates for CDF using the classical methods of mathematical statistics.To assess errors in the seismic events magnitude estimation, and thereby in the seismic hazard parameters evaluation in the nonparametric approach, we propose the use of the resampling methods. Resampling techniques applied to a one dataset provide many replicas of this sample, which preserve its probabilistic properties. In order to estimate the confidence intervals for the CDF of magnitude, we have developed an algorithm based on the bias corrected and accelerated method (BCa method). This procedure uses the smoothed bootstrap and second-order bootstrap samples. We refer to this algorithm as the iterated BCa method. The algorithm performance is illustrated through the analysis of Monte Carlo simulated seismic event catalogues and actual data from an underground copper mine in the Legnica–Głogów Copper District in Poland.The studies show that the iterated BCa technique provides satisfactory results regardless of the sample size and actual shape of the magnitude distribution. 相似文献
8.
We estimate the energetic and spatial characteristics of seismicity in the Algeria–Morocco region using a variety of seismic and statistical parameters, as a first step in a detailed investigation of regional seismic hazard. We divide the region into five seismotectonic regions, comprising the most important tectonic domains in the studied area: the Moroccan Meseta, the Rif, the Tell, the High Plateau, and the Atlas. Characteristic seismic hazard parameters, including the Gutenberg–Richter b-value, mean seismic activity rate, and maximum possible earthquake magnitude, were computed using an extension of the Aki–Utsu procedure for incomplete earthquake catalogs for each domain, based on recent earthquake catalogs compiled for northern Morocco and northern Algeria. Gutenberg–Richter b-values for each zone were initially estimated using the approach of Weichert (Bull Seismol Soc Am 70:1337–1346, 1980): the estimated b-values are 1.04 ± 0.04, 0.93 ± 0.10, 0.72 ± 0.03, 0.87 ± 0.02, and 0.77 ± 0.02 for the Atlas, Meseta, High Plateau, Rif, and Tell seismogenic zones, respectively. The fractal dimension D 2 was also estimated for each zone. From the ratio D 2/b, it appears that the Tell and Rif zones, with ratios of 2.09 and 2.12, respectively, have the highest potential earthquake hazard in the region. The Gutenberg–Richter relationship analysis allows us to derive that in the Tell and Rif, the number of earthquake with magnitude above Mw 4.0, since 1925 normalized to decade and to square cell with 100-km sides is equal to 2.6 and 1.91, respectively. This study provides the first detailed information about the potential seismicity of these large domains, including maximum regional magnitudes, characteristics of spatial clustering, and distribution of seismic energy release. 相似文献
9.
Seismic hazard in mega city Kolkata, India 总被引：2，自引：1，他引：1
The damages caused by recent earthquakes in India have been a wake up call for people to take proper mitigation measures,
especially the major cities that lie in the high seismic hazard zones. Kolkata City, with thick sediment deposit (∼12 km),
one of the earliest cities of India, is an area of great concern as it lies over the Bengal Basin and lies at the boundary
of the seismic zones III and IV of the zonation map of India. Kolkata has been affected by the 1897 Shillong earthquake, the
1906 Calcutta earthquake, and the 1964 Calcutta earthquake. An analysis on the maximum magnitude and b-value for Kolkata City region is carried out after the preparation of earthquake catalog from various sources. Based on the
tectonic set-up and seismicity of the region, five seismic zones are delineated, which can pose a threat to Kolkata in the
event of an earthquake. They are broadly classified as Zone 1: Arakan-Yoma Zone (AYZ), Zone 2: Himalayan Zone (HZ), Zone 3:
Shillong Plateau Zone (SPZ), Zone 4: Bay of Bengal Zone (BBZ), and Zone 5: Shield Zone (SZ). The maximum magnitude (m
max) for Zones 1, 2, 3, 4, and 5 are 8.30 ± 0.51, 9.09 ± 0.58, 9.20 ± 0.51, 6.62 ± 0.43 and 6.61 ± 0.43, respectively. A probability
of 10% exceedance value in 50 years is used for each zone. The probabilities of occurrences of earthquakes of different magnitudes
for return periods of 50 and 100 years are computed for the five seismic zones. The Peak Ground Acceleration (PGA) obtained
for Kolkata City varies from 0.34 to 0.10 g. 相似文献
10.
Northeast India is one of the most highly seismically active regions in the world with more than seven earthquakes on an average per year of magnitude 5.0 and above. Reliable seismic hazard assessment could provide the necessary design inputs for earthquake resistant design of structures in this region. In this study, deterministic as well as probabilistic methods have been attempted for seismic hazard assessment of Tripura and Mizoram states at bedrock level condition. An updated earthquake catalogue was collected from various national and international seismological agencies for the period from 1731 to 2011. The homogenization, declustering and data completeness analysis of events have been carried out before hazard evaluation. Seismicity parameters have been estimated using G–R relationship for each source zone. Based on the seismicity, tectonic features and fault rupture mechanism, this region was divided into six major subzones. Region specific correlations were used for magnitude conversion for homogenization of earthquake size. Ground motion equations (Atkinson and Boore 2003; Gupta 2010) were validated with the observed PGA (peak ground acceleration) values before use in the hazard evaluation. In this study, the hazard is estimated using linear sources, identified in and around the study area. Results are presented in the form of PGA using both DSHA (deterministic seismic hazard analysis) and PSHA (probabilistic seismic hazard analysis) with 2 and 10% probability of exceedance in 50 years, and spectral acceleration (T = 0. 2 s, 1.0 s) for both the states (2% probability of exceedance in 50 years). The results are important to provide inputs for planning risk reduction strategies, for developing risk acceptance criteria and financial analysis for possible damages in the study area with a comprehensive analysis and higher resolution hazard mapping. 相似文献
11.
Abdallah I. Husein Malkawi Robert Y. Liang Jamal H. Nusairat Azm S. Al-Homoud 《Natural Hazards》1995,12(2):139-151
Earthquake hazard maps for Syria are presented in this paper. The Peak Ground Acceleration (PGA) and the Modified Mercalli Intensity (MMI) on bedrock, both with 90% probability of not being exceeded during a life time of 50, 100 and 200 years, respectively are developed. The probabilistic PGA and MMI values are evaluated assuming linear sources (faults) as potential sources of future earthquakes. A new attenuation relationship for this region is developed. Ten distinctive faults of potential earthquakes are identified in and around Syria. The pertinent parameters of each fault, such as theb-parameter in the Gutenberg-Richter formula, the annual rate
4 and the upper bound magnitudem
1 are determined from two sets of seismic data: the historical earthquakes and the instrumentally recorded earthquake data (AD 1900–1992). The seismic hazard maps developed are intended for preliminary analysis of new designs and seismic check of existing civil engineering structures. 相似文献
12.
In this paper, we present a probabilistic seismic hazard analysis (PSHA) for mainland Spain that takes into account recent
new results in seismicity, seismic zoning, and strong ground attenuation not considered in the latest PSHA of the Spanish
Building Code. Those new input data have been obtained as a three-step project carried out in order to improve the existing
hazard map for mainland Spain. We have produced a new earthquake catalogue for the area, in which the earthquakes are given
in moment magnitude through specific deduced relationships for our territory based on intensity data (Mezcua et al. in Seismol
Res Lett 75:75–81, 2004). In addition, we included a new seismogenetic zoning based on the recent partial zoning studies performed by different authors.
Finally, as we have developed a new strong ground motion model for the area García Blanco (2009), it was considered in the hazard calculation together with other attenuations gathered from different authors using data
compatible with our region. With this new data, a logic tree process is defined to quantify the epistemic uncertainty related
to those parts of the process. A sensitivity test has been included in order to analyze the different models of ground motion
and seismotectonic zonation used in this work. Finally, after applying a weighting scheme, a mean hazard map for PGA, based
on rock type condition for 10% exceedance probability in 50 years, is presented, including 15th and 85th percentile hazard
maps. The main differences with the present official building code hazard map are analyzed. 相似文献
13.
The use of logic trees in probabilistic seismic hazard analyses often involves a large number of branches that reflect the uncertainty in the selection of different models and in the selection of the parameter values of each model. The sensitivity analysis, as proposed by Rabinowitz and Steinberg [Rabinowitz, N., Steinberg, D.M., 1991. Seismic hazard sensitivity analysis: a multi-parameter approach. Bull. Seismol. Soc. Am. 81, 796–817], is an efficient tool that allows the construction of logic trees focusing attention on the parameters that have greater impact on the hazard.In this paper the sensitivity analysis is performed in order to identify the parameters that have the largest influence on the Western Liguria (North Western Italy) seismic hazard. The analysis is conducted for six strategic sites following the multi-parameter approach developed by Rabinowitz and Steinberg [Rabinowitz, N., Steinberg, D.M., 1991. Seismic hazard sensitivity analysis: a multi-parameter approach. Bull. Seismol. Soc. Am. 81, 796–817] and accounts for both mean hazard values and hazard values corresponding to different percentiles (e.g., 16%-ile and 84%-ile). The results are assessed in terms of the expected PGA with a 10% probability of exceedance in 50 years for rock conditions and account for both the contribution from specific source zones using the Cornell approach [Cornell, C.A., 1968. Engineering seismic risk analysis. Bull. Seismol. Soc. Am. 58, 1583–1606] and the spatially smoothed seismicity [Frankel, A., 1995. Mapping seismic hazard in the Central and Eastern United States. Seismol. Res. Lett. 66, 8–21]. The influence of different procedures for calculating seismic hazard, seismic catalogues (epicentral parameters), source zone models, frequency–magnitude parameters, maximum earthquake magnitude values and attenuation relationships is considered. As a result, the sensitivity analysis allows us to identify the parameters with higher influence on the hazard. Only these parameters should be subjected to careful discussion or further research in order to reduce the uncertainty in the hazard while those with little or no effect can be excluded from subsequent logic-tree-based seismic hazard analyses. 相似文献
14.
Probabilistic seismic hazard maps for the sultanate of Oman 总被引：2，自引：0，他引：2
I. El-Hussain A. Deif K. Al-Jabri N. Toksoz S. El-Hady S. Al-Hashmi K. Al-Toubi Y. Al-Shijbi M. Al-Saifi S. Kuleli 《Natural Hazards》2012,64(1):173-210
This study presents the results of the first probabilistic seismic hazard assessment (PSHA) in the framework of logic tree for Oman. The earthquake catalogue was homogenized, declustered, and used to define seismotectonic source model that characterizes the seismicity of Oman. Two seismic source models were used in the current study; the first consists of 26 seismic source zones, while the second is expressing the alternative view that seismicity is uniform along the entire Makran and Zagros zones. The recurrence parameters for all the seismogenic zones were determined using the doubly bounded exponential distribution except the zones of Makran, which were modelled using the characteristic distribution. Maximum earthquakes were determined and the horizontal ground accelerations in terms of geometric mean were calculated using ground-motion prediction relationships developed based upon seismic data obtained from active tectonic environments similar to those surrounding Oman. The alternative seismotectonic source models, maximum magnitude, and ground-motion prediction relationships were weighted and used to account for the epistemic uncertainty. Hazard maps at rock sites were produced for 5?% damped spectral acceleration (SA) values at 0.1, 0.2, 0.3, 1.0 and 2.0?s spectral periods as well as peak ground acceleration (PGA) for return periods of 475 and 2,475?years. The highest hazard is found in Khasab City with maximum SA at 0.2?s spectral period reaching 243 and 397?cm/s2 for return periods 475 and 2,475 years, respectively. The sensitivity analysis reveals that the choice of seismic source model and the ground-motion prediction equation influences the results most. 相似文献
15.
This paper deals with the probabilistic seismic hazard analysis carried out in the Oran region, situated in the Northwest of Algeria. This part of Algeriawas historically struck by strong earthquakes. It was particularly affected during theOctober 9, 1790 Oran earthquake of intensity X. The main purpose of this work is to assessseismic hazard on rocks in order to provide engineers and planners with a basic tool for seismicrisk mitigation. The probabilistic approach is used in order to take into account uncertaintiesin seismic hazard assessment. Seismic sources are defined in the light of the most recentresults obtained from seismotectonics analyses carried out in North Algeria.Source parameters such as b-values, slip rate and maximum magnitude are assessed for eachseismic source. The attenuation of ground shaking motion with distance is estimated byusing attenuation relationships developed elsewhere throughout the world (Sadigh et al., 1993; Ambraseys and Bommer, 1991). The two relationships agree well with the local data. Differentchoices of source parameter values and attenuation relationships are assigned weights in alogic tree model. Results are presented as relationships between values of peak groundacceleration (PGA) and annual frequency of exceedance, and maps of hazard for returnperiods of 200 years and 500 years. A maximum peak ground acceleration of 0.42 g is obtainedfor the Oran site for a return period of 500 years. 相似文献
16.
A probabilistic seismic hazard analysis for the states of Tripura and Mizoram in North East India is presented in this paper to evaluate the ground motion at bedrock level. Analyses were performed considering the available earthquake catalogs collected from different sources since 1731–2010 within a distance of 500 km from the political boundaries of the states. Earthquake data were declustered to remove the foreshocks and aftershocks in time and space window and then statistical analysis was carried out for data completeness. Based on seismicity, tectonic features and fault rupture mechanism, this region was divided into six major seismogenic zones and subsequently seismicity parameters (a and b) were calculated using Gutenberg–Richter (G–R) relationship. Faults data were extracted from SEISAT (Seismotectonic atlas of India, Geological Survey of India, New Delhi, 2000) published by Geological Survey of India and also from satellite images. The study area was divided into small grids of size 0.05° × 0.05° (approximately 5 km × 5 km), and the hazard parameters (rock level peak horizontal acceleration and spectral accelerations) were calculated at the center of each of these grid cells considering all the seismic sources within a radius of 500 km. Probabilistic seismic hazard analyses were carried out for Tripura and Mizoram states using the predictive ground motion equations given by Atkinson and Boore (Bull Seismol Soc Am 93:1703–1729, 2003) and Gupta (Soil Dyn Earthq Eng 30:368–377, 2010) for subduction belt. Attenuation relations were validated with the observed PGA values. Results are presented in the form of hazard curve, peak ground acceleration (PGA) and uniform hazard spectra for Agartala and Aizawl city (respective capital cities of Tripura and Mizoram states). Spatial variation of PGA at bedrock level with 2 and 10 % probability of exceedance in 50 years has been presented in the paper. 相似文献
17.
We in this study have calculated the standard normal deviate Z-value to investigate the variations in seismicity patterns in the Taiwan region before and after the Chi-Chi earthquake. We have found that the areas with relatively high seismicity in the eastern Taiwan became abnormally quiet before the Chi-Chi earthquake while the area in the central Taiwan with relatively low seismicity showed unusually active. Such a spatially changing pattern in seismicity strikingly demonstrates the phenomenon of “seismic reversal,” and we here thus present a complete, representative cycle of “seismic reversal” embedding in the changes of seismicity patterns before and after the Chi-Chi earthquake. 相似文献
18.
Valry Ferber Jean-Claude Auriol Yu-Jun Cui Jean-Pierre Magnan 《Engineering Geology》2009,104(3-4):200-210
We conducted a study of the spatial distributions of seismicity and earthquake hazard parameters for Turkey and the adjacent areas, applying the maximum likelihood method. The procedure allows for the use of either historical or instrumental data, or even a combination of the two. By using this method, we can estimate the earthquake hazard parameters, which include the maximum regional magnitude Mˆmax, the activity rate of seismic events and the well-known bˆ value, which is the slope of the frequency-magnitude Gutenberg-Richter relationship. These three parameters are determined simultaneously using an iterative scheme. The uncertainty in the determination of the magnitudes was also taken into consideration. The return periods (RP) of earthquakes with a magnitude M ≥ m are also evaluated. The whole examined area is divided into 24 seismic regions based on their seismotectonic regime. The homogeneity of the magnitudes is an essential factor in such studies. In order to achieve homogeneity of the magnitudes, formulas that convert any magnitude to an MS-surface scale are developed. New completeness cutoffs and their corresponding time intervals are also assessed for each of the 24 seismic regions. Each of the obtained parameters is distributed into its respective seismic region, allowing for an analysis of the localized seismicity parameters and a representation of their regional variation on a map. The earthquake hazard level is also calculated as a function of the form Θ = (Mˆmax,RP6.0), and a relative hazard scale (defined as the index K) is defined for each seismic region. The investigated regions are then classified into five groups using these parameters. This classification is useful for theoretical and practical reasons and provides a picture of quantitative seismicity. An attempt is then made to relate these values to the local tectonics. 相似文献
19.
Djillali Benouar 《Natural Hazards》1996,13(2):119-131
This paper presents the evaluation of seismic hazard at the site of Algiers (capital of Algeria). In order to implement earthquake-resistant design codes, it is usually necessary to know the maximum dynamic load which a particular structure might experience during its economic life, or alternatively, the most probable return period of a specified design load. The evaluation of the seismic hazard at the site, based on peak ground motion acceleration and using Cornell's method and Benouar's earthquake Maghreb catalogue, in terms of return period, probability of exceedance of PGA, design ground motion and a response spectrum, is carried out for the City of Algiers and its surroundings. The response spectrum for Algiers presented in this paper is the first one realized in Algeria using revised Algerian data. 相似文献
20.
In the present paper, the parameters affecting the uncertainties on the estimation of M max have been investigated by exploring different methodologies being used in the analysis of seismicity catalogue and estimation of seismicity parameters. A critical issue to be addressed before any scientific analysis is to assess the quality, consistency, and homogeneity of the data. The empirical relationships between different magnitude scales have been used for conversions for homogenization of seismicity catalogues to be used for further seismic hazard assessment studies. An endeavour has been made to quantify the uncertainties due to magnitude conversions and the seismic hazard parameters are then estimated using different methods to consider the epistemic uncertainty in the process. The study area chosen is around Delhi. The b value and the magnitude of completeness for the four seismogenic sources considered around Delhi varied more than 40% using the three catalogues compiled based on different magnitude conversion relationships. The effect of the uncertainties has been then shown on the estimation of M max and the probabilities of occurrence of different magnitudes. It has been emphasized to consider the uncertainties and their quantification to carry out seismic hazard assessment and in turn the seismic microzonation. 相似文献