共查询到20条相似文献，搜索用时 28 毫秒
1.
Evaluation of the morphometric parameters requires preparation of drainage map, contour map, ordering of the various streams
and measurements of catchment area, perimeter, relative relief, relief ratio, length of drainage channels, drainage density,
drainage frequency, bifurcation ratio, texture ratio, circulatory ratio and constant channel maintenance, which help to understand
the nature of the drainage basin. The present study involves the Geographic Information System (GIS) analysis techniques to
evaluate and compare linear, relief and aerial morphometry of the five subwatersheds of Song River (tributary of the Ganga
River) with special reference to landslide incidences, for future development and planning of the watershed. Jakhan Rao, Song
River, Bandal Nadi, Baldi Nadi and Suswa Nadi are the five major subwatersheds of the Song River basin. All the subwatersheds
are basically of 5th to 6th order. Drainage patterns are mainly dendritic to sub dendritic. The drainage pattern of the Song River basin is mainly structurally
controlled and the area is characterized by high to moderate relief. The asymmetric factor indicates that the tectonic rotation
of the four subwatersheds is upward on the right side of the drainage basin and only one sub-watershed is downward. The numbers
of the landslide incidences are also more in the upward side, than the downward side of the Song River basin. 相似文献
2.
K. H. V. Durga Rao V. Bhanumurthy P. S. Roy 《Journal of the Indian Society of Remote Sensing》2009,37(4):587-600
Hydrological modelling of large river catchments is a challenging task for water resources engineers due to its complexity
in collecting and handling of both spatial and non-spatial data such as rainfall, gauge discharges, and topographic parameters.
In this paper an attempt has been made to use satellite-based rainfall products such as Climatic Prediction Centre (CPC)-National
Oceanic and Atmospheric Administration (NOAA) data for hydrological modelling of larger catchment where the limited field
rainfall data is available. Digital Elevation Models (DEM) such as Global DEM (1 km resolution) and Shuttle Radar Topography
Mission (SRTM) 3-arc second (90 m resolution) DEM have been used to extract topographic parameters of the basin for hydrological
modelling of the study area. Various popular distributed models have been used in this study for computing excess rainfall,
direct runoff from each sub-basin, and flow routing to the main outlet. The Brahmaputra basin, which is very complex both
hydraulically and hydrologically due to its shape, size, and geographical location, has been examined as study area in this
study. A landuse map derived from the satellite remote sensing data in conjunction with DEM and soil textural maps have been
used to derive various basin and channel characteristics such as each sub-basin and channel slope, roughness coefficients,
lag-time. Percentage of residual flows computed between observed flows and simulated flows using Global and SRTM DEMs are
discussed. It is found that the topographic parameters computed using SRTM DEM could improve the model accuracy in computing
flood hydrograph. Need of using better resolution satellite data products and the use of high-density field discharge observations
is discussed. 相似文献
3.
4.
A lumped empirical model, the Geomorphologic Instantaneous Unit Hydrograph (GIUH) rainfall-runoff model, is developed for the Can Le catchment in the upstream region of the Sai Gon river Basin (Vietnam). This model can serve to simulate catchment runoff into the Dau Tieng Reservoir and can be used as a flood forecasting tool for the ungauged Can Le catchment. The GIUH couples geomorphology and hydrology quantitatively. The obtained Unit Hydrograph is based on Horton's morphometric parameters; bifurcation, length and area ratios. A new functionality within the ILWIS GIS-RS package, namely ‘DEM-hydro processing’, is applied to effectively process a Digital Elevation Model to extract these ratios from the drainage network. To supplement the limited field data available, various satellites images have been used such as ASTER, SRTM (Shuttle Radar Topography Mission) and METEOSAT 5. A short field campaign to collect missing ground data was executed between September and October 2005. The data collected included discharge (and stage – discharge curve), meteorological data, soil, land use information that are used for paramerisation, calibration and validation of the GIUH. The model was successfully applied for the Can Le catchment. Using the Horton's morphometric parameters derived from the DEM with estimated overland and stream flow velocities, the model is easy-to-use. 相似文献
5.
The drainage network of a sixth-order tropical river basin, viz. Ithikkara river basin, was extracted from different sources such as Survey of India topographic maps (1: 50,000; TOPO) and digital elevation data of Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) (30 m) and Shuttle Radar Topography Mapping Mission (SRTM) (90 m). Basin morphometric attributes were estimated to evaluate the accuracy of the digital elevation model (DEM)-derived drainage networks for hydrologic applications as well as terrain characterization. The stream networks derived from ASTER and SRTM DEMs show significant agreement (with slight overestimation of lower order streams) with that of TOPO. The study suggests that SRTM (despite the coarser spatial resolution) provides better results, in drainage delineation and basin morphometry, compared to ASTER. Further, the variability of basin morphometry among the data sources might be attributed to spatial variation of elevation, raster grid size and vertical accuracy of the DEMs as well as incapability of the surface hydrologic analysis functions in the GIS platform. 相似文献
6.
M P Tripathi R K Panda S Pradhan S Sudhakar 《Journal of the Indian Society of Remote Sensing》2002,30(1-2):39-52
This study was conducted for the Nagwan watershed of the Damodar Valley Corporation (DVC), Hazaribagh, Bihar, India. Geographic Information System (GIS) was used to extract the hydrological parameters of the watershed from the remote sensing and field data. The Digital Elevation Model (DEM) was prepared using contour map (Survey of India, 1:50000 scale) of the watershed. The EASI/PACE GIS software was used to extract the topographic features and to delineate watershed and overland flow-paths from the DEM. Land use classification were generated from data of Indian Remote Sensing Satellite (IRS-1B—LISS—II) to compute runoff Curve Number (CN). Data extracted from contour map, soil map and satellite imagery, viz. drainage basin area, basin shape, average slope of the watershed, main stream channel slope, land use, hydrological soil groups and CN were used for developing an empirical model for surface runoff prediction. It was found that the model can predict runoff reasonably well and is well suited for the Nagwan watershed. Design of conservation structures can be done and their effects on direct runoff can be evaluated using the model. In broader sense it could be concluded that model can be applied for estimating runoff and evaluating its effect on structures of the Nagwan watershed. 相似文献
7.
AbstractRiver basin assessment is crucial for water management and to address the watershed issues. So, an integrated river basin management and assessment model using morphometric assessment, remote sensing, GIS and SWAT model was envisaged and applied to Kaddam river basin, Telangana state, India. Morphometric results showed high drainage density ranging from 2.19 to 5.5?km2/km, with elongated fan shape having elongation ratio of 0.60–0.75 with sparse vegetation and high relief. Land use change assessment showed that 265.26?km2 of forest land is converted into irrigated land and has increased sediment yields in watersheds. The calibration (r 2?=?0.74, NSE?=?0.84) and validation (r 2?=?0.72, NSE?=?0.84) of SWAT model showed that simulated and observed results were in agreement and in recommended ranges. The SWAT simulations were used to compute mean annual water and sediment yield from 1997 to 2012, along with morphometric results to categorize critical watersheds and conservation structures were proposed accordingly. 相似文献
8.
M. Rudraiah S. Govindaiah S. Srinivas Vittala 《Journal of the Indian Society of Remote Sensing》2008,36(4):351-360
The study area is a part of Kagna river basin in the Gulburga district of Karnataka, India. It covers an area of 1320 km2 and it has been subdivided into 4 sub-basins namely Wadi, Chitapur, Sedam and Kurkunta, which range in area from 184 to 537 km2. The drainage pattern of these sub-basins are delineated using Geo-coded FCC bands 2,3,4 of IRS 1C and 1D(LISS III+PAN merged) on 1:50,000 scale and Survey of India toposheets as reference. The morphometric parameters are computed using ArcInfo and ArcView GIS softwares. The drainage pattern of the study area is dendritic to sub-dendritic with stream orders ranging from IV to VII orders. Drainage density ranges from 1.40 to 1.86 km/km2 suggesting coarse to moderate drainage texture. The change in values of stream length ratio indicate their late youth stage of geomorphic development. The values of bifurcation ratio ranging from 2.00 to 4.71 indicate that all the sub-basins fall under normal basin category. The values of form factor and circulatory ratio, suggest that the Kurkunta sub-basin is elongated and the remaining sub-basins are more or less circular in shape. Elongation ratio indicates that the Wadi sub-basin is a region of very low relief whereas the other sub-basins are associated with moderate to high relief and steep ground slopes. It is concluded that remote sensing and GIS have been proved to be efficient tools in drainage delineation and updation. In the present study these updated drainages have been used for the morphometric analysis. 相似文献
9.
The morphometric analysis of river basin helps to explore the interrelationship between hydraulic parameters and geomorphologic characteristics. The study has been conducted in the Upper Tons basin of Northern Foreland of Peninsular India. The river basin has been characterized using the topographical maps, CARTOSAT satellite image integrated using the GIS techniques. The drainage density analysis indicates lower values in the north-eastern regions and thus these regions can be categorized as better ground water potential zone. There are in total 10 sub-watersheds which have been delineated; SW-4 has maximum drainage density (4.75), stream frequency (5.61) and drainage texture (26.64) followed by SW-6–10. The prioritized sub-watershed numbers SW-4 and SW-6–10 need conservation practices because of their high erodibility and run-off. SW-1–3 and SW-5 regions have better permeable bed rocks and hence good for water harvesting. The areal parameter indicates elongated shape of basin and moderate to steeper ground slope. The results are supported by extensive field survey. This study can be applied for soil and water management, as well as disaster prevention from similar type of drainage basins. 相似文献
10.
11.
Morphometric analysis of sub-watersheds in the pavagada area of Tumkur district,South India using remote sensing and gis techniques 总被引：7，自引：0，他引：7
The study area covers 570 km2 comprising of 9 sub-watersheds (Dalavayihalli, Maddalenahalli, Talamaradahalli, Puluvalli tank, Nagalamadike, Gowdatimmanahalli, Naliganahalli, Devadabetta and Byadanur) range from 49 to 75 km2 forming part of Pennar river basin around Pavagada. The drainage network of 9 sub-watersheds was delineated using remote sensing data - Geocoded FCC of bands - 2 3 4 of IRS 1 C and 1 D (LISS III+PAN merged) on 1:50,000 scale and SOI topomaps were used as reference. The morphometric analysis of 9 sub-watersheds has been carried out using GIS softwares - Arclnfo and Are View. The drainage network shows that the terrain exhibits dendritic to sub-dendritic drainage pattern. Stream orders ranges from fourth to fifth order. Drainage density varies between 1.55 and 2.16 km/ km2 and has very coarse to coarse drainage texture. The relief ratio range from 0.006 to 0.021. The mean bifurcation ratio varies from 3.21 to 4.88 and falls under normal basin category. The elongation ratio shows that Devedabetta sub-watershed possesses circular shape while remaining sub-watersheds mark elongated pattern. Hence from the study it can be concluded that remote sensing techniques proved to be a competent tool in morphometric analysis. 相似文献
12.
M M Jana 《Journal of the Indian Society of Remote Sensing》1997,25(2):105-111
River basin management and development are most important for utilising and conserving the water resources in any region where the average annual rainfall is highly fluctuating, the North Bengal is one of such region. Though there are a large number of rivers having a large catchment area in the hills and carry a huge amount of water during rainy season but they are completely dry in winter and summer. The upper part of majority of river basins arc highly sensitive to water erosion and land slides due to deforestation, intensive cultivation, increased settlements in sloping and erosion prone areas. So, floods in the rainy season and droughts in summer months are frequent features in North Bengal. In view of this proper management and effective conservation of land and water resources is necessary to develop the region. An integrated river basin management consisting soil conservation, afforestation, flood control, and adoption of suitable cropping pattern is essential for economic development of North Bengal. 相似文献
13.
在地图水系自动综合中河流选取需要建立对不同河流重要性程度的有效判别。由于河流汇水区域直接反映河流的作用空间,因而其面积大小成为关键性的量化指标。目前基于河流的汇水区域自动提取方法主要从河流单一要素出发,按“空间均衡竞争”思想平分河流之间的区域,由于未考虑地形因素使得提取的汇水区域往往存在偏差,而传统基于DEM的汇水区域提取虽然考虑了地形,但没有与河流目标建立显性的对应关系。河流是一种天然的沟谷地性线,与山脊线具有对生互补的空间耦合关系,本文提出了一种等高线簇与河网双要素协同的河流汇水区域提取方法,该方法对河流与等高线的目标集合构建约束Delaunay三角网(CD-TIN)并将三角形分类,对不同类型的三角形分别采用骨架线提取规则与梯度向量引导的分水线搜索规则提取分水线段,连接形成网络结构并依此计算各河段的汇水区域。实验结果表明,本算法能更准确地提取河流汇水区域,从而为河流综合选取提供有效支持。 相似文献
14.
15.
Tesfaye Haimanot Tarekegn Alemseged Tamiru Haile Tom Rientjes P. Reggiani Dinand Alkema 《International Journal of Applied Earth Observation and Geoinformation》2010
Flood modeling often provides inputs to flood hazard management. In the present work we studied the flooding characteristics in the data scarce region of the Lake Tana basin at the source of the Blue Nile River. The study required to integrate remote sensing, GIS with a two-dimensional (2D) module of the SOBEK flood model. The resolution of the topographic data in many areas, such as the Lake Tana region, is commonly too poor to support detailed 2D hydrodynamic modeling. To overcome such limitations, we used a Digital Elevation Model (DEM) which was generated from the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) image. A GIS procedure is developed to reconstruct the river terrain and channel bathymetry. The results revealed that a representation of the river terrain largely affects the simulated flood characteristics. Simulations indicate that effects of Lake Tana water levels propagate up to 13 km along the Ribb River. We conclude that a 15 m resolution ASTER DEM can serve as an input to detailed 2D hydrodynamic modeling in data scarce regions. However, for this purpose it is necessary to accurately reconstruct the river terrain geometry and flood plain topography based on ground observations by means of a river terrain model. 相似文献
16.
Morphometric analysis of a drainage basin using aerial photographs: A case study of Khairkuli basin,district Dehradun,U.P. 总被引：1，自引：0，他引：1
M. D. Nautiyal 《Journal of the Indian Society of Remote Sensing》1994,22(4):251-261
Remote sensing techniques using satellite images and aerial photographs are convenient tools in morphometric analysis of a drainage basin. In the present study morphometric parameters of Khairkuli drainage basin, district Dehradun, are worked out using aerial photographs. The parameters worked out include bifurcation ratio, stream length, form factor, circulatory ratio, elongation ratio, drainage density, constant of channel maintenance and stream frequency. Hypsometric relations of drainage basin are also presented. Relation between cumulative stream length and the stream order establishes that the ratio between cumulative stream length Σ 1 u Σ 1 nu Lu and the stream order u is constant throughout the. successive orders of a drainage basin suggesting that geometrical similarity is preserved in the basins of increasing order. The morphometric parameters computed suggest that the area is covered by resistant permeable rocks (with fracture and karstic porosities) and vegetative cover, the drainage network is affected by tectonic disturbances. The peak flows generated from the basin are likely to be moderately high and of short duration. 相似文献
17.
The methodology of catchment extraction especially from regular grid digital elevation models (DEMs) is briefly reviewed. Then an efficient algorithm, which combines vector process and traditional neighbourhood raster process, is designed for extracting the catchments and subcatchments from depressionless DEMs. The catchment area of each river in the grid DEM data is identified and delineated, then is divided into subcatchments as required. Compared to traditional processes, this method for identifying catchments focuses on the boundaries instead of the area inside the catchments and avoids the boundary intersection phenomena. Last, the algorithm is tested with a set of DEMs of different sizes, and the result proves that the computation efficiency and accuracy are better than existent methods. 相似文献
18.
ZHUQing TIANYixiang 《地球空间信息科学学报》2005,8(2):85-89
The methodology of catchment extraction especially from regular grid digital elevation models (DEMs) is briefly reviewed. Then an efficient algorithm, which combines vector process and traditional neighbourhood raster process, is designed for extracting the catchments and subcatchments from depressionless DEMs. The catchment area of each river in the grid DEM data is identified and delineated, then is divided into subcatchments as required. Compared to traditional processes, this method for identifying catchments focuses on the boundaries instead of the area inside the catchments and avoids the boundary intersection phenomena. Last, the algorithm is tested with a set of DEMs of different sizes, and the result proves that the computation efficiency and accuracy are better than existent methods. 相似文献
19.
20.
Digital Elevation Model (DEM) is a quantitative representation of terrain and is important for Earth science and hydrological applications. DEM can be generated using photogrammetry, interferometry, ground and laser surveying and other techniques. Some of the DEMs such as ASTER, SRTM, and GTOPO 30 are freely available open source products. Each DEM contains intrinsic errors due to primary data acquisition technology and processing methodology in relation with a particular terrain and land cover type. The accuracy of these datasets is often unknown and is non-uniform within each dataset. In this study we evaluate open source DEMs (ASTER and SRTM) and their derived attributes using high postings Cartosat DEM and Survey of India (SOI) height information. It was found that representation of terrain characteristics is affected in the coarse postings DEM. The overall vertical accuracy shows RMS error of 12.62 m and 17.76 m for ASTER and SRTM DEM respectively, when compared with Cartosat DEM. The slope and drainage network delineation are also violated. The terrain morphology strongly influences the DEM accuracy. These results can be highly useful for researchers using such products in various modeling exercises. 相似文献