共查询到20条相似文献,搜索用时 171 毫秒
1.
2.
以提升北斗卫星导航能力为目的,设计了改进差分相干累加算法的北斗卫星导航弱信号捕获方法。该方法通过构建北斗卫星信号模型,利用该模型获得北斗卫星导航中频信号;然后以改进差分相干累加算法为基础,建立北斗卫星导航弱信号捕获模型,将北斗卫星导航中频信号作为该模型的输入,经过北斗卫星导航弱信号捕获模型对中频信号块实施累加处理和多普勒圆周位移搜索,以及快速傅里叶变换和反傅里叶变换等步骤后,通过判断北斗卫星导航弱信号捕获判决,输出北斗卫星导航弱信号捕获结果。实验结果表明:该方法在捕获北斗卫星导航弱信号时的运算量较小,可有效捕获-36 dB的北斗卫星导航弱信号,同时其捕获概率较高,应用效果较为显著。 相似文献
3.
导航卫星观测数据质量是影响地面增强系统定位精度的直接因素,北斗地基增强系统经过北斗三号全球卫星导航系统(BDS-3)适配性改造后能够获取的卫星观测值数量相较北斗二号卫星导航系统(BDS-2)适配改造提升了30%~50%,对这些观测数据的质量评估和分析尤为重要.本文利用数据完整率、多路径误差等基准站观测值质量评估方法,使用零基线测试和精密单点定位(PPP)测试两种方法,提出一种综合区域地基增强系统的BDS-3数据分析方法.对研究区域进行实证试验,结果表明:BDS-3卫星在亚太地区的数据质量已经与GPS相当;由于BDS-3卫星空间分布结构更优,地面测站可以获得的高仰角(高度角>50°)可用观测值较单GPS提升了200%以上. 相似文献
4.
在外界射频信号、导航接收机混频处理噪声的影响下,为了有效捕获北斗卫星导航弱信号信息,提出基于密度聚类的北斗导航弱信号自动捕获方法.使用密度聚类得到BDS信号来源的聚类中心,结合聚类中心设计卫星波束方向,约束卫星导航信号接收范围,抵御干扰信号的空域干扰;通过基于小波阈值方法去除波束抗干扰作用下导航信号的噪声信息;采用相关函数模值计算方法计算去噪后导航信号和已知弱信号之间相关性,相关性大于门限值时说明去噪后导航信号为弱信号.实验结果表明,在外界射频信号和混频器干扰下,此方法具备自动捕获北斗卫星导航弱信号的能力. 相似文献
5.
6.
自2012年12月27日我国正式宣告北斗卫星导航系统建成之后,北斗卫星导航系统已成为国际同行们的研讨热点,实现北斗卫星导航系统技术标准化,势在必行,刻不容缓;为此,笔者提出下列建议:规范系统之名,需要用"中央文件式"的方法促使国内同行采用之;确切表述系统基本参数,需要普及卫星导航技术多学科的基本概念;发挥因特网的准快作用,及时公告北斗卫星星座的基本技术参数。 相似文献
7.
北斗系统全球电离层建模理论与方法研究 总被引:1,自引:0,他引:1
电离层延迟是卫星导航系统的主要误差源.北斗卫星导航系统(BDS )已由区域系统(北斗二号系统,BDS-2 )发展为全球系统(北斗三号系统,BDS-3 ) ,BDS-3星座具有全球覆盖、区域异构的特点,卫星播发了S和L频段多个导航信号,向下兼容 BDS-2的 B1I和 B3I信号,增加B1C、B2a(兼容 GPSL1/L5、GalileoE1/E5a)两个新信号,试验卫星播发了Bs频点信号. 相似文献
8.
北斗三号全球卫星导航系统(BDS-3) B2b信号是由3颗地球同步轨道(GEO)卫星播发改正信号组成,可为用户提供公开、免费的高精度服务,对北斗卫星导航系统(BDS)在国土测绘、海洋测绘以及桥梁建筑物健康监测等领域的高精度应用具有重要意义. BDS-3 B2b信号的精度评估是实现其高精度应用的重要环节.首先利用BDS-3 B2b信号改正广播星历产品,并获得改正后的精密轨道和钟差产品.然后,以武汉大学国际GNSS服务(IGS)分析中心提供的事后精密产品(WUM)为参考,评估了由B2b信号改正后的精密轨道和钟差产品的精度.结果表明:改正后北斗卫星轨道的径向(R)、切向(A)、法向(C)误差的均方根(RMS)分别为6.26 cm、24.21 cm、21.79 cm,钟差差值的标准差(STD)均值为0.33 ns.最后,利用改正后的精密轨道和钟差产品进行精密单点定位(PPP)验证,结果表明:PPP定位东(E)、北(N)、天顶(U)方向精度分别为0.06 m、0.05 m、0.13 m.说明广播星历通过B2b改正后的精密轨道和钟差产品与IGS事后精密产品精度相当,可满足单站实时高精度定位与导航的... 相似文献
9.
北斗三号卫星导航系统(BDS-3)开通已一年有余,通过研究2019-08—2021-08共2 a的北斗卫星导航系统(BDS)广播星历数据,采用事后精密星历对北斗二号卫星导航系统(BDS-2)和BDS-3卫星的轨道、钟差和空间信号测距误差(SISRE)进行分析. 结果表明:BDS-3系统开通后,卫星轨道精度比BDS-2提升明显,径向(R)误差均方根(RMS)值从0.87 m左右提升至优于0.23 m,精度提升约74%,3D误差RMS值从1.63 m以内提升到优于0.75 m,精度提升约54%;氢原子钟和铷原子钟精度相当,BDS-3钟差误差RMS值精度提升与BDS-2提升基本相同,精度提升约1 ns;SISRE精度比对中,BDS-2 SISRE的RMS值从0.9 m提升到0.7 m,BDS-3从0.8 m提升到0.5 m. 综合比较,BDS-3系统性能提升较大. 相似文献
10.
北斗三号卫星导航系统(BeiDou-3 navigation satellite system,BDS-3)在BDS-2基础上,设计实现了高速宽带星间链路网络,以期实现导航和通信的一体化建设,并为卫星自主定轨(autonomous orbit determina-tion,AOD)技术的实现积累宝贵的实测数据.首先,利... 相似文献
11.
12.
BOC(binary offset carrier)信号自相关函数存在多值性,BOC信号的捕获不能简单地移植GPS信号捕获算法。在分析经典并行码相位算法和BOC信号互相关特性基础上,仿真分析了并行码相位搜索算法对BOC信号进行捕获的有效性,并针对经典算法在低信噪比条件下捕获信号存在的不足,对经典算法进行了改进设计,并利用改进算法对多种BOC信号进行了仿真分析。结果表明,本文提出的改进捕获算法适用于BOC(pn,n)信号(p为整数),扩展了经典算法的适用范围,且与经典算法相比,改进捕获算法对所给定BOC信号能够改善捕获信噪比10dB,可显著提高接收机捕获灵敏度,对接收机BOC信号捕获算法设计具有重要意义。 相似文献
13.
在Galileo系统建设和GPS现代化的进程中,为实现与BPSK(Bi-phase Shift Keying)的频谱分离,采用了BOC(Binary Offset Carrier)调制。BOC调制在码跟踪精度、多径抑制等方面比BPSK调制具有更好的性能,但其自相关函数的多相关峰特性使得在测距中可能产生偏差,因此,消除相关峰的模糊度是BOC信号接收中非常关键的问题。介绍了一种基于QBOC码的BOC信号码跟踪环路(“BOC十QBOC-BOC”),并推导出该环路码跟踪性能的解析表达式,最后的仿真结果验证了理论推导的正确性,可为BOC信号接收机的设计提供参考。 相似文献
14.
Weighted discriminators for GNSS BOC signal tracking 总被引:1,自引:1,他引:0
Modern Global Navigation Satellite System including Galileo and GPS III will employ multiplexed binary offset carrier (MBOC) modulation to achieve spectrum separation and enhanced tracking performance. A challenge of the MBOC or BOC signal tracking is the presence of ambiguities due to multiple sidepeaks of the autocorrelation functions. Several different techniques including multi-correlator and double estimator schemes have been proposed to address the ambiguity issue. We propose a class of ambiguity-free code tracking techniques by exploiting the unique features of the BOC modulation. In the proposed architecture, the incoming BOC-modulated signals are correlated with BOC-modulated replica and the spreading codes, respectively. Through a multiplicative combination strategy of the two correlator outputs, a noncoherent weighted discriminator is formed and shown to possess the ambiguity-free property. The multipath effect is assessed and compared with existing early-minus-late power and autocorrelation sidepeak cancellation technique discriminators. The noise effects of the theory and simulation are also discussed. In order to further verify the proposed scheme, a set of field data of a Galileo in-orbit validation satellite is collected and processed. It is demonstrated that the proposed method is simple to implement, free from ambiguities, and yields acceptable performance in the presence of multipath and noise. 相似文献
15.
16.
17.
18.
19.
Emilie Rebeyrol Olivier Julien Christophe Macabiau Lionel Ries Antoine Delatour Laurent Lestarquit 《GPS Solutions》2007,11(3):159-171
Spectrum limitations for navigation systems require that the various navigation signals broadcast by the Galileo system must
be combined and must utilize bandwidth-efficient modulations. At the L1 band, one of the most important questions is how to
combine all the Open Service signals and the Public Regulated Service signal at the payload level, while maintaining good
performance at reception. The Interplex modulation, a particular phase-shifted-keyed/phase modulation (PSK/PM), was chosen
to transmit these signals because it is a constant-envelope modulation, thereby allowing the use of saturated power amplifiers
with limited signal distortion. The Interplex modulation was also taken as baseline at the E6 band to transmit the three channels
and the services associated on the same carrier frequency. At the E5 band, the modulation must combine two different services
on a same constant envelope composite signal, while keeping the simplicity of a BOC implementation. The constant envelope
Alternate Binary Offset Carrier (ALTBOC) modulation was chosen as the solution to transmit the Galileo E5 band signal. The
main objective of this paper is to study these Galileo modulations. After the introduction, the E5 band signals are described,
followed by the Alternate BOC modulation which has been chosen to transmit them. The second part describes the general formulation
of the Interplex modulation and its key parameters for an optimal multiplexing of the Galileo L1 band signals. Since the Galileo
Open Service signals at the L1 band are still not yet completely specified, different test cases are considered and their
impact on the resulting choice for the Interplex modulation parameters is exposed. 相似文献