共查询到20条相似文献，搜索用时 515 毫秒
1.
In downhole microseismic monitoring, accurate event location relies on the accuracy of the velocity model. The model can be estimated along with event locations. Anisotropic models are important to get accurate event locations. Taking anisotropy into account makes it possible to use additional data – two S-wave arrivals generated due to shear-wave splitting. However, anisotropic ray tracing requires iterative procedures for computing group velocities, which may become unstable around caustics. As a result, anisotropic kinematic inversion may become time consuming. In this paper, we explore the idea of using simplified ray tracing to locate events and estimate medium parameters. In the simplified ray-tracing algorithm, the group velocity is assumed to be equal to phase velocity in both magnitude and direction. This assumption makes the ray-tracing algorithm five times faster compared to ray tracing based on exact equations. We present a set of tests showing that given perforation-shot data, one can use inversion based on simplified ray-tracing even for moderate-to-strong anisotropic models. When there are no perforation shots, event-location errors may become too large for moderately anisotropic media. 相似文献
2.
黏弹各向异性介质中传播不均匀波,其反射、透射模式不仅与介质分界面两侧速度对比有关,还与品质因子Q的对比有关. 用伪谱技术模拟黏弹各向异性介质分界面上波的反射、透射,并与弹性各向异性介质、黏弹各向同性介质和弹性各向同性介质的模拟结果做比较. 计算平面波的反射、透射系数,分析介质的黏弹性和各向异性对反射、透射系数的影响. 数值模拟了一个三层介质模型中的波场,分析两个分界面上产生的反射波的特征. 黏弹各向异性介质中,qS波比qP波衰减程度大. 相似文献
3.
We examine the one-dimensional direct current method in anisotropic earth formation. We derive an analytic expression of a simple, two-layered anisotropic earth model. Further, we also consider a horizontally layered anisotropic earth response with respect to the digital filter method, which yields a quasi-analytic solution over anisotropic media. These analytic and quasi-analytic solutions are useful tests for numerical codes. A two-dimensional finite difference earth model in anisotropic media is presented in order to generate a synthetic data set for a simple one-dimensional earth. Further, we propose a particle swarm optimization method for estimating the model parameters of a layered anisotropic earth model such as horizontal and vertical resistivities, and thickness. The particle swarm optimization is a naturally inspired meta-heuristic algorithm. The proposed method finds model parameters quite successfully based on synthetic and field data. However, adding 5 % Gaussian noise to the synthetic data increases the ambiguity of the value of the model parameters. For this reason, the results should be controlled by a number of statistical tests. In this study, we use probability density function within 95 % confidence interval, parameter variation of each iteration and frequency distribution of the model parameters to reduce the ambiguity. The result is promising and the proposed method can be used for evaluating one-dimensional direct current data in anisotropic media. 相似文献
4.
现有海洋可控源电磁三维数值模拟方法大多基于电导率各向同性介质理论,不能模拟海底地层电导率各向异性的实际情况.本文给出了电导率各向异性三维介质中电性源海洋可控源电磁二次电场的边值问题以及相应的变分问题,采用长方体单元对研究区域剖分,将场分量定义在剖分单元的边上,利用矢量有限单元法求解变分问题,实现了电导率任意各向异性海洋可控源电磁三维矢量有限元数值模拟.这个新的正演方法可以计算电导率任意各向异性三维地电模型的海洋可控源电磁响应,基于二次场矢量有限元法直接求解电磁场,避免了传统有限元方法可能遇到的伪解问题和难于处理电场法向分量不连续的问题,提高了数值模拟计算精度.一维电导率各向异性模型电磁场数值解与解析解吻合得相当好,无论在源附近还是远离源处相对误差均不超过1%.电导率各向异性二维模型的计算结果与已有文献采用的非结构有限元模拟结果十分吻合.三维地电模型数值模拟结果显示,电导率各向异性张量电导率主轴分量和欧拉角对不同装置海洋可控源电磁响应均有着明显的影响. 相似文献
5.
This paper presents a traveltime inversion approach, using the reflection traveltimes from offset VSP data, to reconstruct the horizontal and vertical velocities for stratified anisotropic media. The inverse problem is reduced to a set of linear equations, and solved by the singular value decomposition (SVD) technique. The validity of this inversion scheme is verified using two sets of synthetic data simulated using a finite‐difference method, one for an isotropic model and the other for an elliptically anisotropic model. The inversion result demonstrates that our anisotropic velocity inversion scheme may be applied to both isotropic and anisotropic media. The method is finally applied to a real offset VSP data set, acquired in an oilfield in northwestern China. 相似文献
6.
In this paper, the background of MGF-K migration in dual domain (wavenumber-frequency K-F and space-time) in anisotropic media is presented. Algorithms for poststack (zero-offset) and prestack migration are based on downward extrapolation of acoustic wavefield by shift-phase with correction filter for lateral variability of medium’s parameters. In anisotropic media, the vertical wavenumber was determined from full elastic wavefield equations for two dimensional (2D) tilted transverse isotropy (TTI) model. The method was tested on a synthetic wavefield for TTI anticlinal model (zero-offset section) and on strongly inhomogeneous vertical transverse isotropy (VTI) Marmousi model. In both cases, the proper imaging of assumed media was obtained. 相似文献
7.
8.
研究与实践表明,对于长偏移距、宽方位地震数据,忽略各向异性会明显降低成像质量,影响储层预测与描述的精度.针对典型的横向各向同性(TI)介质,本文面向深度域构造成像与偏移速度分析的需要,研究基于射线理论的局部角度域叠前深度偏移成像方法.它除了像传统Kirchhoff叠前深度偏移那样输出成像剖面和炮检距域的共成像点道集,还遵循地震波在成像点处的局部方向特征、基于扩展的脉冲响应叠加原理获得入射角度域和照明角度域的成像结果.为了方便快捷地实现TI介质射线走时与局部角度信息的计算,文中讨论和对比了两种改进的射线追踪方法:一种采用从经典各向异性介质射线方程演变而来的由相速度表征的简便形式;另一种采用由对称轴垂直的TI(即VTI)介质声学近似qP波波动方程推导出来的射线方程.文中通过坐标旋转将其扩展到了对称轴倾斜的TI(即TTI)介质.国际上通用的理论模型合成数据偏移试验表明,本文方法既适用于复杂构造成像,又可为TI介质深度域偏移速度分析与模型建立提供高效的偏移引擎. 相似文献
9.
10.
可控源音频大地电磁测深法(CSAMT)基本上是基于电性各向同性理论的假设,而实际地层普遍表现为电性各向异性现象,因此研究各向异性地层条件下CSAMT方法的电磁响应具有重要的理论意义和应用价值.本文从有源Maxwell方程出发,推导出了二维各向异性地层条件下无限长线源频率域的电磁场响应,得到了一组平行于线源方向的电场分量E_x和磁场分量H_x的偏微分方程,并采用有限元法进行求解.模型的计算结果表明:不论是对均匀半空间还是一维层状介质中的各向异性二维体模型的计算,均能从结果中明显地看出各向同性背景场和各向异性异常体的存在;在计算中通过改变各向异性系数或各向异性旋转角,其结果在视电阻率和相位曲线上均存在显著区别.计算结果表明了在各向异性地层中,仍然采用各向同性的假设进行CSAMT资料的处理与解释,可能会带来比较严重的误差,这种情况下必须采用基于各向异性的地质模型对CSAMT资料进行处理和解释.研究结果对于提高CSAMT方法的勘探效果和应用水平具有重要的指导意义. 相似文献
11.
L. Klimeš 《Studia Geophysica et Geodaetica》2006,50(3):431-447
Whereas the ray-centred coordinates for isotropic media by Popov and Pšenčík are uniquely defined by the selection of the
basis vectors at one point along the ray, there is considerable freedom in selecting the ray-centred coordinates for anisotropic
media. We describe the properties common to all ray-centred coordinate systems for anisotropic media and general conditions,
which may be imposed on the basis vectors. We then discuss six different particular choices of ray-centred coordinates in
an anisotropic medium. This overview may be useful in choosing the ray-centred coordinates best suited for a particular application.
The equations are derived for a general homogeneous Hamiltonian of an arbitrary degree and are thus applicable both to the
anisotropic-ray-theory rays and anisotropic common S-wave rays. 相似文献
12.
由所建立的三维qP波相速度表示式出发,导出并解析求解各向异性介质中的频散方程,得到三维各向异性介质中的相移算子,进而将以相移算子为基础的对称非平稳相移方法推广到各向异性介质,发展了一个三维各向异性介质的深度偏移方法. 文中使用的各向异性介质的速度模型与现行的各向异性构造的速度估计方法一致,将各向同性、弱各向异性及强各向异性统一在一个模型中. 所建立的各向异性介质对称非平稳相移波场延拓算子可以同时适应速度及各向异性参数横向变化;文中给出的算例虽然是针对二维VTI介质的,但所提出的算法同样适用于三维TI介质. 相似文献
13.
正交各向异性介质P波走时分析及Thomsen参数反演 总被引：10，自引：3，他引：10
对于包含有垂向裂缝的横向各向同性地层或含有多组正交裂缝的各向同性地层，正交各向异性介质模型是最简单的与实际地层相符的方位各向异性模型.本文对单层水平反射界面正交各向异性模型采用射线追踪法计算了全方位角变化的P波走时，时距曲线表现出强方位各向异性.采用小生境遗传算法，对三条成一定角度的测线的走时信息进行速度和各向异性参数反演.模型算例表明，此方法可以得到高精度的裂缝方位角、P波垂直速度和较高精度的Thomsen各向异性参数. 相似文献
14.
在长波长假设条件下,水平层状地层中发育一组垂直排列的裂缝构成了等效正交各向异性介质.各向异性参数与裂缝弱度参数的估算有助于非均匀各向异性介质的各向异性特征描述,而弹性逆散射理论是非均匀介质参数反演的有效途径.基于地震散射理论,我们首先推导了非均匀正交介质中纵波散射系数方程,并通过引入正交各向异性特征参数,提出了一种新颖的正交各向异性方位弹性阻抗参数化方法.为了提高反演的稳定性与横向连续性,我们发展了贝叶斯框架下的正交各向异性方位弹性阻抗反演方法,同时考虑了柯西稀疏约束正则化和平滑模型约束正则化,最终使用非线性的迭代重加权最小二乘策略实现了各向异性特征参数的稳定估算.模型和实际资料处理表明,反演结果与测井解释数据相吻合,证明了该方法能够稳定可靠地从方位叠前地震资料中获取各向异性特征参数,减小参数估算的不确定性,为非均匀正交介质的各向异性预测提供了一种高可靠性的地震反演方法. 相似文献
15.
A new wave equation is derived for modelling viscoacoustic wave propagation in transversely isotropic media under acoustic transverse isotropy approximation. The formulas expressed by fractional Laplacian operators can well model the constant-Q (i.e. frequency-independent quality factor) attenuation, anisotropic attenuation, decoupled amplitude loss and velocity dispersion behaviours. The proposed viscoacoustic anisotropic equation can keep consistent velocity and attenuation anisotropy effects with that of qP-wave in the constant-Q viscoelastic anisotropic theory. For numerical simulations, the staggered-grid pseudo-spectral method is implemented to solve the velocity–stress formulation of wave equation in the time domain. The constant fractional-order Laplacian approximation method is used to cope with spatial variable-order fractional Laplacians for efficient modelling in heterogeneous velocity and Q media. Simulation results for a homogeneous model show the decoupling of velocity dispersion and amplitude loss effects of the constant-Q equation, and illustrate the influence of anisotropic attenuation on seismic wavefields. The modelling example of a layered model illustrates the accuracy of the constant fractional-order Laplacian approximation method. Finally, the Hess vertical transversely isotropic model is used to validate the applicability of the formulation and algorithm for heterogeneous media. 相似文献
16.
3D anisotropic waveform inversion could provide high-resolution velocity models and improved event locations for microseismic surveys. Here we extend our previously developed 2D inversion methodology for microseismic borehole data to 3D transversely isotropic media with a vertical symmetry axis. This extension allows us to invert multicomponent data recorded in multiple boreholes and properly account for vertical and lateral heterogeneity. Synthetic examples illustrate the performance of the algorithm for layer-cake and ‘hydraulically fractured’ (i.e. containing anomalies that simulate hydraulic fractures) models. In both cases, waveform inversion is able to reconstruct the areas which are sufficiently illuminated for the employed source-receiver geometry. In addition, we evaluate the sensitivity of the algorithm to errors in the source locations and to band-limited noise in the input displacements. We also present initial inversion results for a microseismic data set acquired during hydraulic fracturing in a shale reservoir. 相似文献
17.
Perturbation methods are common tools for describing wave propagation in weakly anisotropic media. The anisotropic medium is replaced by an average isotropic medium where wave propagation can be treated analytically and the correction for the effect of anisotropy is computed by perturbation techniques. This works well for anisotropies of up to 10%. Some materials (e.g. shales), however, can exhibit a much stronger anisotropy. In this case a background is required which still can be treated analytically but is applicable to stronger P-wave anisotropy. We present an averaging technique to compute a best-fitting ellipsoidal medium to an arbitrary anisotropic medium. Ellipsoidal media are sufficiently simple for analytical expressions to be available for many applications and allow consideration of strong P-wave anisotropy. The averaging of the arbitrary anisotropic medium can be carried out globally (i.e. for the whole sphere) or sectorially (e.g. for seismic waves propagating predominantly in the vertical direction). We derive linear relationships for the coefficients of the ellipsoid which depend on the elastic coefficients of the anisotropic medium. We also provide specifications for best-fitting elliptical and best-fitting isotropic media. Numerical examples for different rocks demonstrate the improved approximation of the anisotropic model obtained using the formulae derived, compared with the conventionally used average isotropic medium. 相似文献
18.
Rayleigh wave dispersion can be induced in an anisotropic medium or a layered isotropic medium. For a layered azimuthally anisotropic structure, traditional wave equation of layered structure can be modified to describe the dispersion behavior of Rayleigh waves. Numerical stimulation results show that for layered azimuthal anisotropy both the dispersion velocities and anisotropic parameters depend principally on anisotropic S-wave velocities. The splitting S-wave velocities may produce dispersion splitting of Rayleigh waves. Such dispersion splitting appears noticeable at azimuthal angle 45°. This feature was confirmed by the measured results of a field test. The fundamental mode splits into two branches at azimuthal angle 45° to the symmetry axis for some frequencies, and along the same direction the difference of splitting-phase velocities of the fundamental model reaches the maximum. Dispersion splitting of Rayleigh waves was firstly displayed for anisotropy study in dispersion image by means of multichannel analysis of surface waves, the image of which provides a new window for studying the anisotropic property of media. 相似文献
19.
地震各向异性介质的群速度是关于相角的复杂函数,将其表示成射线角形式较为困难,这给地震各向异性分析以及走时正演模拟等带来诸多不便;另一方面,观测资料表明实际地球介质的地震各向异性通常较弱,这为用射线角近似表示地震波群速度提供了可能.本文基于以射线角近似表示相角的思想,提出了一种弱各向异性条件下,群速度射线角近似表示的新方法.计算表明,在弱地震各向异性条件下,新方法在很宽的射线角范围内,对三种地震波的群速度都能很好地近似,在准SV波计算精度方面显著优于目前通常使用的近似方法. 相似文献
20.
本文提出-种利用有偏VSP资料反射波旅行时信息重建椭圆各向异性介质中水平向与垂直向速度的方法。其中,地下介质假定为层状椭圆各向异性介质。反射波旅行时间采用射线追踪理论及几何关系计算得到,反演中的线性方程组采用奇异值分解(SVD)技术进行求解。 方法检测时,我们对各向同性介质及椭圆各向异胜介质情况下有限差分法正演模拟的深井有偏移距VSP地震资料分别进行各向同性和各向异性方法反演成像。结果表明,本文所述方法较之各向同性介质模型反演方法对介质类型有很好的适用性,同时也说明了本方法的司行性。最后,我们分别介绍了对实际有偏VSP资料反演得到的地下介质的速度结构图像。 相似文献