首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
The main objective of the research work isthe homogenisation of the two recentAlgerian earthquake catalogues for thecommon covered period of time, from 1900 to1990, for the region under considerationlimited by [33°N–38°N,4°E-9.5°E] and the updatingof the catalogue for the twentieth century(1900–2000). To mitigate the deficiencyof the incompleteness of catalogue, aneffort was made to establish a correlationbetween surface-wave magnitude Ms andbody-wave magnitude mb in the form ofMs = a + b (mb). A complete, exact andhomogeneous earthquake catalogue as much aspossible, comprising 870 seismic events,has been compiled. Seismicity analysis ofthe region shows a strong concentration ofseismicity along a band of no more than400 km width oriented mainly in theeast-west direction parallel to the coast.Moreover, earthquakes in this zone arerather associated to strike-slip mechanism.The focal mechanism show a regional stressregime that corresponds to horizontalcompression in NW-SE to N-S direction. As aresult of the review of the seismicity ofnorth-eastern Algeria from the compilationof checked and corrected data and itscorrelation with other geologic andgeophysical investigations based ondocumentary sources, it was possible toconstruct a most complete seismotectonicmap. It leads also to delineate fourseismogenic zones in the Tellian Atlas, aless important zone in the Saharan Atlas, asixth zone at the boundary of both Atlasand finally, a seventh one along thecoastal zone. The seismicity-active faultscorrelation of some of these defined zonesis examined in details with a specialattention to the Saharan Atlas zone, theHodna and Biban zone as well as Soummam andBabor zone where further research workallowed to find some neotectonic featuresconsidered as a significant sign of recenttectonic activity.  相似文献   

2.
K-means cluster analysis and seismicity partitioning for Pakistan   总被引：2，自引：2，他引：0  
Pakistan and the western Himalaya is a region of high seismic activity located at the triple junction between the Arabian, Eurasian and Indian plates. Four devastating earthquakes have resulted in significant numbers of fatalities in Pakistan and the surrounding region in the past century (Quetta, 1935; Makran, 1945; Pattan, 1974 and the recent 2005 Kashmir earthquake). It is therefore necessary to develop an understanding of the spatial distribution of seismicity and the potential seismogenic sources across the region. This forms an important basis for the calculation of seismic hazard; a crucial input in seismic design codes needed to begin to effectively mitigate the high earthquake risk in Pakistan. The development of seismogenic source zones for seismic hazard analysis is driven by both geological and seismotectonic inputs. Despite the many developments in seismic hazard in recent decades, the manner in which seismotectonic information feeds the definition of the seismic source can, in many parts of the world including Pakistan and the surrounding regions, remain a subjective process driven primarily by expert judgment. Whilst much research is ongoing to map and characterise active faults in Pakistan, knowledge of the seismogenic properties of the active faults is still incomplete in much of the region. Consequently, seismicity, both historical and instrumental, remains a primary guide to the seismogenic sources of Pakistan. This study utilises a cluster analysis approach for the purposes of identifying spatial differences in seismicity, which can be utilised to form a basis for delineating seismogenic source regions. An effort is made to examine seismicity partitioning for Pakistan with respect to earthquake database, seismic cluster analysis and seismic partitions in a seismic hazard context. A magnitude homogenous earthquake catalogue has been compiled using various available earthquake data. The earthquake catalogue covers a time span from 1930 to 2007 and an area from 23.00° to 39.00°N and 59.00° to 80.00°E. A threshold magnitude of 5.2 is considered for K-means cluster analysis. The current study uses the traditional metrics of cluster quality, in addition to a seismic hazard contextual metric to attempt to constrain the preferred number of clusters found in the data. The spatial distribution of earthquakes from the catalogue was used to define the seismic clusters for Pakistan, which can be used further in the process of defining seismogenic sources and corresponding earthquake recurrence models for estimates of seismic hazard and risk in Pakistan. Consideration of the different approaches to cluster validation in a seismic hazard context suggests that Pakistan may be divided into K?=?19 seismic clusters, including some portions of the neighbouring countries of Afghanistan, Tajikistan and India.  相似文献   

3.
The occurrence of the Algiers earthquake (M 6.8) of May 21, 2003, has motivated the necessity to reassess the probabilistic seismic hazard of northern Algeria. The fact that this destructive earthquake took place in an area where there was no evidence of previous significant earthquakes, neither instrumental nor historical, strongly encourages us to review the seismic hazard map of this region. Recently, the probabilistic seismic hazard of northern Algeria was computed using the spatially smoothed seismicity methodology. The catalog used in the previous computation was updated for this review, and not only includes information until June 2003, but also considers a recent re-evaluation of several historical earthquakes. In this paper, the same methodology and seismicity models are utilized in an effort to compare this methodology against an improved and updated seismic catalog. The largest mean peak ground acceleration (PGA) values are obtained in northernmost Algeria, specifically in the central area of the Tell Atlas. These values are of the order of 0.48 g for a return period of 475 years. In the City of Algiers, the capital of Algeria, and approximately 50 km from the reported epicenter of this latest destructive earthquake, a new mean PGA value of 0.23 g is obtained for the same return period. This value is 0.07 g greater than that obtained in the previous computation. In general, we receive greater seismic hazard results in the surrounding area of Algiers, especially to the southwest. The main reason is not this recent earthquake by itself, but the significant increase in the mmax magnitude in the seismic source where the city and the epicenter are included.  相似文献   

4.
The historical seismicity of the eastern Transbaikalia   总被引：1，自引：0，他引：1  
The seismicity of eastern Transbaikalia has not been studied extensively. According to the current estimate, the seismic activity in this area is defined as moderate and low. At the same time, there is some historical evidence to show that major seismic occurrences have repeatedly taken place in various areas of Transbaikalia. The evidence is fragmentary and for this reason has not been taken account of when developing parametric catalogs and for seismic hazard assessment in eastern Siberia. The present paper considers some new data that throw light on the macroseismic effects of some large historical earthquakes in eastern Transbaikalia and permit estimation of their basic parameters. Additional material was discovered when inspecting the regional periodicals that were published in the late 19th and early 20th centuries. This study suggests higher seismic activity for eastern Transbaikalia than thought previously.  相似文献   

5.
The estimation of the seismological parameters of historical earthquakes is a key step when performing seismic hazard assessment in moderate seismicity regions as France. We propose an original method to assess magnitude and depth of historical earthquakes using intensity data points. A flowchart based on an exploration tree (ET) approach allows to apply a consistent methodology to all the different configurations of the earthquake macroseismic field and to explore the inherent uncertainties. The method is applied to French test case historical earthquakes, using the SisFrance (BRGM, IRSN, EDF) macroseismic database and the intensity prediction equations (IPEs) calibrated in the companion paper (Baumont et al. Bull Earthq Eng, 2017). A weighted least square scheme allowing for the joint inversion of magnitude and depth is applied to earthquakes that exhibit a decay of intensity with distance. Two cases are distinguished: (1) a “Complete ET” is applied to earthquakes located within the metropolitan territory, while (2) a “Simplified ET” is applied to both, offshore and cross border events, lacking information at short distances but disposing of reliable data at large ones. Finally, a priori-depth-based magnitude computation is applied to ancient or poorly documented events, only described by single/sporadic intensity data or few macroseismic testimonies. Specific processing of “felt” testimonies allows exploiting this complementary information for poorly described earthquakes. Uncertainties associated to magnitude and depth estimates result from both, full propagation of uncertainties related to the original macroseismic information and the epistemic uncertainty related to the IPEs selection procedure.  相似文献   

6.
The macroseismic field of the Balkan area   总被引：1，自引：0，他引：1  
A catalogue of 356 macroseimic maps which are available for the Balkan area was compiled, including information on the source parameters of the corresponding earthquakes, the macroseismic parameters of their strength and their macroseismic field. The data analysis of this catalogue yields new empirical relations for attenuation, which can be applied for the calibration of historical events, modelling of isoseismals and seismic hazard assessment. An appropriate analysis allowed the separation and estimation of the average values of the geometrical spreading, n, and anelastic attenuation factor, c, for the examined area which were found equal to –3.227 ± 0.112 and –0.0033 ± 0.0010. Scaling relations for the focal macroseismic intensity, If, and the epicentral intensity I0, versus the earthquake moment magnitude were also determined for each Balkan country. A gradual decrease of the order of 0.5 to 1 intensity unit is demonstrated for recent (after 1970) earthquakes in Greece. Finally the depths of the examined earthquakes as they robustly determined (error <5 km) on the basis of macroseismic data were found to have small values ( 10 km). However large magnitude earthquakes show higher focal depths ( 25 km), in accordance with an increase of the seismic fault dimensions for such events.  相似文献   

7.
The region of Blida is characterized by a relatively high seismic activity, pointed especially during the past two centuries. Indeed, it experienced a significant number of destructive earthquakes such as the earthquakes of March 2, 1825 and January 2, 1867, with intensity of X and IX, respectively. This study aims to investigate potential seismic hazard in Blida city and its surrounding regions. For this purpose, a typical seismic catalog was compiled using historical macroseismic events that occurred over a period of a few hundred years, and the recent instrumental seismicity dating back to 1900. The parametric-historic procedure introduced by Kijko and Graham (1998, 1999) was applied to assess seismic hazard in the study region. It is adapted to deal with incomplete catalogs and does not use any subjective delineation of active seismic zones. Because of the lack of recorded strong motion data, three ground prediction models have been considered, as they seem the most adapted to the seismicity of the study region. Results are presented as peak ground acceleration (PGA) seismic hazard maps, showing expected peak accelerations with 10% probability of exceedance in 50-year period. As the most significant result, hot spot regions with high PGA values are mapped. For example, a PGA of 0.44 g has been found in a small geographical area centered on Blida city.  相似文献   

8.
Seismotectonic zonation studies in the Tell Atlas of Algeria, a branch of the Africa-Eurasia plate boundary, provide a valuable input for deterministic seismic hazard calculations. We delineate a number of seismogenic zones from causal relationships established between geological structures and earthquakes and compile a working seismic catalogue mainly from readily available sources. To this catalogue, for a most rational and best-justified hazard analysis, we add estimates of earthquake size translated from active faulting characteristics. We assess the regional seismic hazard using a deterministic procedure based on the computation of complete synthetic seismograms (up to 1 Hz) by the modal summation technique. As a result, we generate seismic hazard maps of maximum velocity, maximum displacement, and design ground acceleration that blend information from geology, historical seismicity and observational seismology, leading to better estimates of the earthquake hazard throughout northern Algeria. Our analysis and the resulting maps illustrate how different the estimate of seismic hazard is based primarily on combined geologic and seismological data with respect to the one for which only information from earthquake catalogues has been used.  相似文献   

9.
In regions that undergo low deformation rates, as is the case for metropolitan France (i.e. the part of France in Europe), the use of historical seismicity, in addition to instrumental data, is necessary when dealing with seismic hazard assessment. This paper presents the strategy adopted to develop a parametric earthquake catalogue using moment magnitude Mw, as the reference magnitude scale to cover both instrumental and historical periods for metropolitan France. Work performed within the framework of the SiHex (SIsmicité de l’HEXagone) (Cara et al. Bull Soc Géol Fr 186:3–19, 2015. doi: 10.2113/qssqfbull.186.1.3) and SIGMA (SeIsmic Ground Motion Assessment; EDF-CEA-AREVA-ENEL) projects, respectively on instrumental and historical earthquakes, have been combined to produce the French seismic CATalogue, version 2017 (FCAT-17). The SiHex catalogue is composed of ~40,000 natural earthquakes, for which the hypocentral location and Mw magnitude are given. In the frame of the SIGMA research program, an integrated study has been realized on historical seismicity from intensity prediction equations (IPE) calibration in Mw detailed in Baumont et al. (submitted) companion paper to their application to earthquakes of the SISFRANCE macroseismic database (BRGM, EDF, IRSN), through a dedicated strategy developed by Traversa et al. (Bull Earthq Eng, 2017. doi: 10.1007/s10518-017-0178-7) companion paper, to compute their Mw magnitude and depth. Macroseismic data and epicentral location and intensity used both in IPE calibration and inversion process, are those of SISFRANCE without any revision. The inversion process allows the main macroseismic field specificities reported by SISFRANCE to be taken into account with an exploration tree approach. It also allows capturing the epistemic uncertainties associated with macroseismic data and to IPEs selection. For events that exhibit a poorly constrained macroseismic field (mainly old, cross border or off-shore earthquakes), joint inversion of Mw and depth is not possible, and depth needs to be fixed to calculate Mw. Regional a priori depths have been defined for this purpose based on analysis of earthquakes with a well constrained macroseismic field where joint inversion of Mw and depth is possible. As a result, 27% of SISFRANCE earthquake seismological parameters have been jointly inverted and for the other 73% Mw has been calculated assuming a priori depths. The FCAT-17 catalogue is composed of the SIGMA historical parametric catalogue (magnitude range between 3.5 up to 7.0), covering from AD463 to 1965, and of the SiHex instrumental one, extending from 1965 to 2009. Historical part of the catalogue results from an automatic inversion of SISFRANCE data. A quality index is estimated for each historical earthquake according to the way the events are processed. All magnitudes are given in Mw which makes this catalogue directly usable as an input for probabilistic or deterministic seismic hazard studies. Uncertainties on magnitudes and depths are provided for historical earthquakes following calculation scheme presented in Traversa et al. (2017). Uncertainties on magnitudes for instrumental events are from Cara et al. (J Seismol 21:551–565, 2017. doi: 10.1007/s10950-016-9617-1).  相似文献   

10.
Based on previous observations of the phenomenon of precursory seismic quiescence before crustal main shocks and recent results that indicate an increase in the occurrence of main shocks in the next years, we focus this study on the detection of the seismic quiescence situation in Greece in the beginning of 1999. We use the declustered seismicity catalogue of the Institute of Geodynamics, National Observatory of Athens (NOA) from 1968–1998, to investigate the significance of seismic quiescence for the region 19°–29°E and 34°–42°N. We searched for seismicity rate changes at every node of the grid by a moving time window and we present the results for the beginning of 1999. The results map four (4) areas having a quiescence which duration ranges from 3.8 to6 years in the beginning of 1999. Three of these areas have been devestated by catastrophic earthquakes 17–21 years ago and significant quiescence also preceded those main shocks. Based on these results, an estimate of the future seismic hazard of these areas is made.  相似文献   

11.
2016年12月—2018年4月间布设于汶川、芦山地震之间地震空段的密集监测台阵(LmsSGA)提供了密集的观测数据.通过拾取地震走时、初始定位,计算地方震级,得到了完备性震级为0级的地震目录.更加完备的地震目录为地震空段及周围地震活动的时空分布特征和孕震风险性评估提供了丰富的信息.重定位结果显示地震主要集中于龙门山断裂带深度为5～20km的孕震层内.地震活动频繁的汶川、芦山主震区,震源的空间分布模式与其早期余震相似,说明两次大地震的区域仍处于缓慢的应力调整阶段.青藏高原物质东向挤出受宝兴、彭灌杂岩阻挡,在两个杂岩体西北侧地震活动频繁.地震活动性分布显示汶川—茂县、映秀—北川断裂上存在一个清晰的长约30km,宽约20km的地震活动"空白"区域,与其下方因部分熔融而产生的低速体分布一致,我们推测熔融体的加温作用是导致空段内极低的地震活动性的主要原因.监测时段内仍观测到降雨变化率和地震数量呈反相关关系,再次证实了汶川—芦山地震间地震空段及邻区内季节性降雨对地震活动性存在一定调节作用.综合分析S波速度模型、历史强震活动及b值,我们推断地震空段东部的彭灌断裂中段及周围部分隐伏断层存在发生强震的风险.  相似文献   

12.
Faulting, shallow seismicity (0–30 km), and seismic hazard of the Costa Rican Central Valley were analyzed. Faults in the study area are oriented northwest or northeast. There is an active fault system in the south flank of the Central Volcanic Ridge and another in the north flank of the Talamanca Ridge. Faults of these systems have generated 15 destructive earthquakes in the area during the last 228 years all of them shallow and their locations show one cluster near the Poas Volcano and another southward the Central Valley. These earthquakes have damaged cities of the Central Valley, two of them destroyed Cartago city and almost 1000 people were killed. Regarding recent seismicity, there are three main seismic sources at the Central Volcanic Ridge: Irazu, Bajo de la Hondura and Poas and other three in the Talamanca Ridge: Puriscal, Los Santos and Pejibaye.A seismic hazard map for the Metropolitan Area of San José has been elaborated, based on local tectonic and seismic information. The area for the hazard computation covers an area of 20×15 km2 and includes the zone where the most population and socioeconomic activities are concentrated. The computation analysis are based on areas zones and faults, each one characterized by recurrence parameters, geometry, minimum and maximum magnitude and source depth. A recent local spectral attenuation model, which includes relations for shallow crustal sources and subduction zone earthquakes, has been applied in this study. The seismic hazard results are presented in terms of contour plots of estimated peak ground acceleration (PGA) for bedrock conditions for return period of 50, 100 and 500 years. In the Central Park of San Jose City the following PGA values were found: 0.29g for 50 years, 0.36g for 100 years, and 0.53g for 500 years.  相似文献   

13.
Ground motion prediction equations (GMPE) in terms of macroseismic intensity are a prerequisite for intensity-based shake maps and seismic hazard assessment and have the advantage of direct relation to earthquake damage and good data availability also for historical events. In this study, we derive GMPE for macroseismic intensity for the Campania region in southern Italy. This region is highly exposed to the seismic hazard related to the high seismicity with moderate- to large-magnitude earthquakes in the Appenninic belt. The relations are based on physical considerations and are easy to implement for the user. The uncertainties in earthquake source parameters are accounted for through a Monte Carlo approach and results are compared to those obtained through a standard regression scheme. One relation takes into account the finite dimensions of the fault plane and describes the site intensity as a function of Joyner–Boore distance. Additionally, a relation describing the intensity as a function of epicentral distance is derived for implementation in cases where the dimensions of the fault plane are unknown. The relations are based on an extensive dataset of macroseismic intensities for large earthquakes in the Campania region and are valid in the magnitude range M w = 6.3–7.0 for shallow crustal earthquakes. Results indicate that the uncertainties in earthquake source parameters are negligible in comparison to the spread in the intensity data. The GMPE provide a good overall fit to historical earthquakes in the region and can provide the intensities for a future earthquake within 1 intensity unit.  相似文献   

14.
Kracke  D.  Heinrich  R.  Jentzsch  G.  Kaiser  D. 《Studia Geophysica et Geodaetica》2000,44(4):537-548
East Thuringia/Germany, especially the region Gera-Ronneburg, is part of the large Kyffhäuser-Jachymov-Fault-Zone and displays moderate seismicity. However, its seismic hazard is significantly higher than that of the surrounding area including the Vogtland/Northern Bohemian region. The earthquake catalogue of Germany contains for this region besides the well-investigated Central German Earthquake (March 1872, I 0 =VII-VIII) entries of up to I 0 =VIII (14th century). Epicentral intensities and coordinates of these historical earthquakes are considered as uncertain. In seismic hazard analysis historical events which are uncertain are often neglected. But, especially in regions of moderate seismicity and infrequent larger earthquakes, the time window considered should be extended as far as possible. Apart from the necessity to study the historical sources of the strongest 14th century earthquakes, we investigate the influence of these events on the seismic hazard, taking into account the uncertainties of their size and location. Generally, the investigations clearly reveal the importance of defining source regions on the one hand and the significance of the local relevant attenuation function on the other hand. A further important point in seismic hazard assessment is the strong influence of the geological site conditions on seismic hazard (amplification or damping phenomena). For both points the well-known Central German Earthquake (1872) supplies important information.  相似文献   

15.
ＴｈｅａｐｐｌｉｃａｔｉｏｎｏｆｓｅｉｓｍｉｃｄａｔａｗｉｔｈｄｉｆｆｅｒｅｎｔｐｒｅｃｉｓｉｏｎｉｎｔｈｅｄｅｔｅｒｍｉｎａｔｉｏｎｏｆｓｅｉｓｍｉｃｉｔｙｐａｒａｍｅｔｅｒｓＸｕｅ－ＳｈｅｎＪＩＮ（金学申）；Ｙｉｎｇ－ＨｕａＤＡＩ（戴英华）；Ｊｕ...  相似文献   

16.
In many countries such as Spain earthquake databases still mainly comprise macroseismic data from felt effects. The full exploit of this information is of basic importance for seismic risk assessment and emergency planning, given the strict link between macroseismic intensity and damage. A probabilistic procedure specifically developed to handle macroseismic data, mostly relying on site information and seismogenic-source free, has been applied to evaluate seismic hazard in SE-Spain (Alicante-Murcia region). Present seismicity is moderate-low with largest magnitudes slightly over Mw5.0. The historical record includes very destructive earthquakes, maximum EMS98 intensities reaching IX–X and X in the nineteenth century (e.g., Torrevieja 1829 earthquake). Very recently, two events in the area on 11 May 2011 (Mw4.5, Mw5.2) killed nine people, injured 300, and produced important damage in the city of Lorca. Regional hazard maps for the area together with specific hazard curves at selected localities are obtained. Results are compared with the maximum observed intensities in the period 1300–2012, and with the values in the seismic hazard map from the Spanish Building Code in force. In general, the maximum felt intensity values are closer to the hazard values calculated for 2 % probability of exceedance in 50 years, using felt and expected intensity. The intensity-based probabilistic hazard maps obtained through the applied approach reduce the inherent smoothing of those based on standard probabilistic seismic hazard assessment approaches for the region, allowing identifying possible over- or sub-estimates of site hazard values, providing very valuable information for risk reduction strategies or for future updates of the building code hazard maps.  相似文献   

17.
In western Europe, the knowledge of long-term seismicity is based on reliable historical seismicity and covers a time period of less than 700 years. Despite the fact that the seismic activity is considered as low in the region extending from the Lower Rhine Embayment to England, historical information collected recently suggests the occurrence of three earthquakes with magnitude around 6.0 or greater. These events are a source of information for the engineer or the scientist involved in mitigation against large earthquakes. We provide information relevant to this aspect for the Belgian earthquake of September 18, 1692. The severity of the damage described in original sources indicates that its epicentral intensity could be IX (EMS-98 scale) and that the area with intensity VII and greater than VII has at least a mean radius of 45 km. Following relationships between average macroseismic radii and magnitude for earthquakes in stable continental regions, its magnitude Ms is estimated as between 6.0 and 6.5. To extend in time our knowledge of the seismic activity, we conducted paleoseismic investigations in the Roer Graben to address the question of the possible occurrence of large earthquakes with coseismic surface ruptures. Our study along the Feldbiss fault (the western border of the graben) demonstrates its recent activity and provides numerous lines of evidence of Holocene and Late Pleistocene large earthquakes. It suggests that along the 10 km long Bree fault scarp, the return period for earthquakes with magnitude from 6.2 to 6.7 ranges from 10,000 to 20,000 years during the last 50,000 years. Considering as possible the occurrence of similar earthquakes along all the Quaternary faults in the Lower Rhine Embayment, a large earthquake could occur there each 500–1000 years. These results are important in two ways. (i) The evidence that large earthquakes occur in western Europe in the very recent past which is not only attested by historical sources, but also suggested by paleoseismic investigations in the Roer Graben. (ii) The existence of a scientific basis to better evaluate the long-term seismicity in this part of Europe (maximal magnitude and return period) in the framework of seismic hazard assessment.  相似文献   

18.
The parametric catalogues of historical earthquakes in East Siberia contain large data gaps. Among these is a 15-year period in the late nineteenth century (1886–1901). This period was not covered by any of macroseismic catalogues known; neither acquisition nor systematization of macroseismic data was ever performed for that purpose. However, 15 years is a rather long period in which large seismic events may have occurred. The present paper deals with the previously unknown earthquake that occurred on November 13, 1898. The primary macroseismic data were taken from regional periodicals. On the strength of all the evidence obtained, the earthquake epicenter is localized in Western Transbaikalia, near the western end of the Malkhansky Range; the magnitude is estimated at M?=?5.9. The information about the large earthquake of November 13, 1898 provides filling significant gaps in knowledge for seismicity in Western Transbaikalia and a better understanding of seismic potential of faults therein. The obtained results show that the periods of seismic quiescence in catalogues may be related to insufficient information on seismicity of Eastern Siberia in the historical past rather than to the absence of large earthquakes.  相似文献   

19.
The earthquake risk on Romania is one of the highest in Europe, and seismic hazard for almost half of the territory of Romania is determined by the Vrancea seismic region, which is situated beneath the southern Carpathian Arc. The region is characterized by a high rate of occurrence of large earthquakes in a narrow focal volume at depth from 70 to 160 km. Besides the Vrancea area, several zones of shallow seismicity located within and outside the Romanian territory are considered as seismically dangerous. We present the results of probabilistic seismic hazard analysis, which implemented the “logic tree” approach, and which considered both the intermediate-depth and the shallow seismicity. Various available models of seismicity and ground-motion attenuation were used as the alternative variants. Seismic hazard in terms of macroseismic intensities, peak ground acceleration, and response spectra was evaluated for various return periods. Sensitivity study was performed to analyze the impact of variation of input parameters on the hazard results. The uncertainty on hazard estimates may be reduced by better understanding of parameters of the Vrancea source zone and the zones of crustal seismicity. Reduction of uncertainty associated with the ground-motion models is also very important issue for Romania.  相似文献   

20.
In 2000, the region of the Koyna-Warna water reservoirs in West India was hit by two strong earthquakes, which occurred six months apart and had magnitudes M > 5. The Koyna-Warna seismic zone is a typical region of induced seismicity with a pronounced correlation between seismicity and water level variations in the reservoirs. This indicates that the stress level in the region is close to critical; thus, insignificant variations in stress caused by the variations in the water level may trigger a strong earthquake. In order to study the preparatory processes in the sources of the induced earthquakes, in this paper we analyze the seismic catalogue for the Koyna-Warna region before a pair of strong earthquakes of 2000. The induced seismicity is found to exhibit prognostic variations, which are typical of preparation of tectonic earthquakes and indicative of the formation of metastable source zones of future earthquakes. Based on the obtained results, we suggest that initiation of failure in these metastable zones within the region of induced seismicity could have been caused by the external impacts associated with water level variations in the reservoirs and by the internal processes of avalanche unstable crack propagation.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号