首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
A major cost in exploring the upper 1–2 km of crystalline crust with reflection seismics is the drilling required for explosive sources. By reducing the charge size to a minimum, shallow inexpensive shotholes can be drilled with handheld equipment. Here, we present results from a full-scale test using small charges for high-resolution seismic surveying over a nuclear waste disposal study site (not an actual site). Two 2–2.5-km-long crossing profiles were acquired in December 1999 with 10-m shot and geophone spacing in the Laxemar area, near Oskarshamn in southeastern Sweden. After standard processing, including dip moveout (DMO), several subhorizontal to moderately dipping reflections are imaged. Many of the dipping ones can be correlated to fracture zones observed in a ca. 1700-m-deep borehole where the profiles cross and/or to fracture zones mapped on the surface. The imaged fracture zones form a complex 3D pattern illustrating the necessity of having 3D control before interpreting seismic reflection data. Analyses of sonic and density logs from the borehole show that greenstones have significantly higher impedances than the more dominant granite found in the borehole (granite/greenstone reflection coefficient is +0.065). These greenstones may contribute to the reflectivity when associated with fracture zones. In some cases, where they are present as larger subhorizontal lenses, they may be the dominant source of reflectivity. A set of north-dipping (10°) reflectors at 3–3.5-km depth can be correlated to a similar set observed below the island of Ävrö about 3 km to the east.  相似文献   

2.
湖南境内沿倾向发育较深的脉状矿床的地质特征及规律   总被引：4，自引：0，他引：4  
黄镜友 《湖南地质》1995,14(1):44-48
湖南省境内有些脉状矿床，沿倾向延伸的长度为水平长度的数倍，而且还有侧伏规律。若脉状矿床发育于缓倾角的断层带上时，矿脉往往受断层上盘板岩、断层带上的泥质的或硅质的断层胶结物所控制，矿脉则发育于其下面；若矿脉发育于高角度的断裂裂隙中时，则矿脉往往是相互平行的多条，且呈雁行排列。这些特点和规律，对地质勘查具有指导意义。  相似文献   

3.
Summary This paper presents a rock mechanics design methodology applicable to steeply dipping orebodies typical of many underground hardrock mines. The first stage in the design process is the characterization of the rock mass using bothin situ and laboratory data. The effects of anisotropy on rock mass behaviour are discussed with reference to laboratory and field observations. The second stage involves the use of a number of selected numerical modelling techniques to investigate ground response in the near-field rock mass surrounding the mining excavations. This study shows that the use of several numerical methods in conjunction, allowing for the advantages of each method to be maximized, provides a more comprehensive analysis of the different facets of stope design. This approach differs from those in the literature which seek to compare the different numerical methods in order to select just one method best suited for a problem. The design methodology employed emphasizes the importance of developing an understanding of ground deformation mechanisms as opposed to predicting absolute behaviour.  相似文献   

4.
A long-range, sidescan sonar (GLORIA) survey of an approximately 100-km square area of the East Pacific Rise crest between 3°S and 4°S extends results obtained in the same area by Lonsdale (1977) using Deep-tow. The axial, linear volcano was found to be continuous over a distance of 75 km. The presence of major inward and outward facing fault scarps was confirmed, but the GLORIA data show several distinct differences between the two fault sets. The inward dipping faults are more numerous, more closely spaced, and longer than the outward dipping ones, and their dip-slopes backscatter sound more extensively than those of the outward dipping faults; moreover most of them appear to be formed within 2 km of the axis, whereas the majority of the outward dipping faults begin to develop between 5 and 8 km from the axis. These differences suggest that the two sets of faults have different origins. The horizontal pattern of inward dipping faults is similar to those observed on other mid-ocean rises at all spreading rates, though the lengths and separations of the scarps are slightly, and their throws considerably, less than on slower spreading rises. This common horizontal pattern suggests that inward dipping faults on all rises have a common mode of formation regardless of spreading rate. Horizontal tension is probably the dominant factor, but an additional mechanism is needed to explain the polarization of fault dips that occurs in the region 2–8 km from the axis. The similarity of major fault spacings on the East Pacific Rise to those on slower spreading rises suggests that faulting is invariant in space, rather than time, and that the lithosphere where these faults are formed (about 2 km from the spreading axis) has a similar, small thickness for all spreading rates. This is attributed to the regulating effect of hydrothermal circulation and plate cooling.  相似文献   

5.
The screening of potential chemicals for control of Bemisia tabaci on poinsettia (Euphorbia pulcherrima c.v. Lilo Pink) plants using a leaf dipping technique was investigated. All relevant B. tabaci lifestages (eggs, larvae and adults) were investigated. In leaf dipping tests, Certis spraying oil was the only compound to show potential to be used as a control agent against B. tabaci eggs, with 81% obtained mortality. Oberon resulted in no mortality of B. tabaci eggs in the reported experiments. Leaf dipping against second instar and adult B. tabaci proved more effective for all chemical products. Dipping techniques using Majestik, Certis spraying oil and Agri- 50 E all resulted in high second instar larval mortality (93, 87 and 85.5 %, respectively). Certis spraying oil again resulted in a high efficacy against adult B. tabaci with 100 % mortality obtained. The potential of the various chemicals to be incorporated into integrated pest management strategies for the control of B. tabaci is discussed.  相似文献   

6.
贺兰山北段牛头沟金矿床为华北克拉通西北缘新发现的金矿床,包括构造破碎带蚀变岩型和石英脉型两种矿化类型,后者可进一步细分为低缓石英脉型和陡窄石英脉型2个亚类。矿区所有矿体均赋存在古元古界贺兰山群变质杂岩和混合花岗岩内,受主干断裂F_1及其上盘次级断裂体系控制。综合本文及前人研究成果表明,破碎带蚀变岩型石英流体包裹体以纯液相水溶液包裹体为主,而低缓石英脉型和陡窄石英脉型石英流体包裹体则以气液两相水溶液包裹体为主,不同矿化类型成矿流体均为中低温(160~210℃)、中低盐度(6%~12%NaCl_(eq))的H_2O-NaCl流体。对矿区内3种矿化类型石英流体包裹体和硫化物分别开展的H-O和S-Pb同位素研究显示:破碎带蚀变岩型和陡窄石英脉型流体包裹体δD_(H2O)组成相近,分别为-75.2‰~-89.3‰和-87.0‰~-93.8‰,而低缓石英脉型流体包裹体则具有较高的δD_(H2O)值(-45.7‰~-67.7‰);流体包裹体δ~(18)O_(H2O)值则由破碎带蚀变岩型(3.7‰~4.4‰)→低缓石英脉型(1.9‰~3.3‰)→陡窄石英脉型(0.5‰~0.9‰)依次降低。破碎带蚀变岩型和陡窄石英脉型δ~(34)S组成均为正值,分别为1.3‰~6.9‰和2.2‰~5.8‰,而低缓石英脉型则具有较低的δ~(34)S值(-5.1‰~-2.6‰)。低缓石英脉型金矿具有明显不同的δD_(H2O)和δ~(34)S组成,可能与含矿断裂性质及其距离导矿构造F_1断裂较远等因素所共同导致的成矿流体氧逸度升高有关。3种矿化类型对应的矿石均表现出明显富集Th放射成因Pb的特点,~(206)Pb/~(204)Pb(16.467~17.994)和~(207)Pb/~(204)Pb(15.382~15.582)组成相对均一,而~(208)Pb/~(204)Pb变化较大(37.413~42.345)。总体上,石英流体包裹体H-O同位素组成表明成矿流体均为岩浆水和大气降水形成的混合流体,其大气降水比例自破碎带蚀变岩型→低缓石英脉型→陡窄石英脉型依次升高;矿石S-Pb同位素指示成矿物质为深部岩浆和具有高Th/U比的基底围岩双重来源。结合区域构造–岩浆演化,笔者将牛头沟金矿床成矿过程概括为晚古生代裂陷盆地形成阶段、中晚侏罗世区域挤压推覆阶段和晚侏罗世至早白垩世岩浆热液活动阶段等3个阶段。  相似文献   

7.
The Hyde-Macraes Shear Zone (HMSZ) is a regionally continuous, low-angle, NE dipping (~15°) late-metamorphic thrust zone in the Mesozoic Otago Schist. The shear zone, which is host to large volumes of mineralised schist, consists of foliated fissile schist with some massive schist pods. Two sets of quartz veins are found within the HMSZ: thrust-related, shallowly dipping veins that were emplaced parallel or sub-parallel to the shears and swarms of steeply dipping extensional veins, which cut across the metamorphic foliation. The latter are restricted to the massive schist pods. Mutual cross-cutting relationships occur between steep extensional veins and shallow-dipping veins, suggesting that they formed contemporaneously. The co-existence of these two vein types locally implies local rotation of the principal stress axes to produce extensional veins within a regional thrust setting. The steep extensional veins are spatially related to lateral and oblique ramps within the HMSZ. Three-dimensional mechanical models show that these lateral or oblique ramps can produce favourable conditions for extensional vein formation when combined with a high fluid pressure and oblique convergence. Mechanical requirements include a reduced differential stress, a positive volumetric strain and an increase in the horizontal shear stress. Our models show that under certain conditions, it is possible for extension-related structures to form during shortening because of local changes in the stress state without the need for a regional scale switch in the imposed stress field. The convergence direction across the HMSZ during formation of the steep extensional veins was ~WNW.  相似文献   

8.
对于低信噪比资料,压制随机噪声,增强有效信号是地震资料处理的首要任务。而传统的奇异值分解去噪算法,在有效信号横向相干性较强时,去噪效果明显,但当有效信号同相轴呈倾斜、弯曲或孤立状态时,其在压制随机噪声的同时,存在滤除部分有效信号的弊端,为此通过对不同时窗内的地震数据进行拉平、奇异值分解数据重构与反拉平等处理方法,对常规奇异值分解算法进行改进,以克服其对包含非水平连续信号资料去噪效果差的局限。理论数据和实际资料的去噪结果表明,改进后的算法去噪效果明显优于常规奇异值分解法,能在保证有效波不被滤除的前提下有效提高地震资料的信噪比。  相似文献   

9.
We extend Riemannian wavefield extrapolation to pre- and post-stack migration using 2D logpolar coordinate system in order to enhance imaging of subsurface structures with imaging of dipping reflectors and turning waves. The logpolar coordinate is a coordinate system adequate for propagating both the source and receiver wavefields. The logpolar extrapolation wavenumber introduces an isotropic slowness model stretch to the single square root operator that enables the use of Cartesian finite-difference extrapolators for propagating wavefields in logpolar meshes. Wavefield extrapolation in this coordinate does not require any ray tracing at all and it can be readily extended to high-order finite-difference schemes since it is an analytic extrapolation operator. Two migration examples illustrate the advantages of the logpolar coordinate for imaging complex geological structures. We compared results of post- and pre-stack depth migration in logpolar and elliptic coordinate systems and we found that steeply dipping events can be better imaged in logpolar coordinate than in elliptic coordinate.  相似文献   

10.
Near-surface layer variations can degrade the desired response of seismic arrays which are typically used to attenuate horizontally traveling coherent noise and enhance vertically traveling signal. We investigate the effect of variations in the near-surface layer thickness on the performance of arrays by studying their impulse and wavelet responses. The models considered include the topographic variations and a channel in the base of weathering layer. The topographic variations include a dipping surface layer as well as a surface layer that follows a sine wave. The geological channel is assumed to be present under the entire receiver array as well as partially under a few receivers. We use Ricker wavelet and model plane wavefronts with incidence angles (90, 70, 45, 20, and 5 °) on a 12-element equally weighted array for the weathering layer models. We found that the array responses are more degraded for near-vertically traveling waves in all cases. The array responses are also found to be more degraded when channel variations are present underneath a few receivers as compared to the entire array length. We recommend designing a spatial filter or using single-sensor records after correcting for intra-array statics to preserve the reflection amplitudes in the presence of weathering layer variations.  相似文献   

11.
The paper presents a detailed analysis of 1st April 2015 earthquake, whose epicenter (30.16° N, 79.28° E) was located near Simtoli village of Chamoli district, Uttarakhand. The focal depth is refined to 7 km by the grid search technique using moment tensor inversion. The source parameters of the earthquake as estimated by spectral analysis method suggested the source radius of ~1.0 km, seismic moment as 1.99E+23 dyne-cm with moment magnitude (Mw) of 4.8 and stress drop of 69 bar. The fault plane solution inferred using full waveform inversion indicated two nodal planes, the northeast dipping plane having strike 334° and dip 5° and the southwest dipping plane with dip 86° and strike 118°. The parallelism of the nodal plane striking 334° with dip 5° as indicated in depth cross sections of the tectonic elements suggested the north dipping Main Boundary Thrust (MBT) to be the causative fault for this earthquake. Spatio-temporal distribution of earthquakes during the period 1960-2015 showed seismic quiescence during 2006-2010 and migration of seismicity towards south.  相似文献   

12.
A major consequence of the interaction of a plume with an oceanic ridge is the enhanced melt production and associated crust generation. In the case of Iceland crustal thickness as large as 20 to 40 km has been reported. Crustal seismic velocities are high, and have to be explained by thermal or chemical effects. In the first part of the paper we address the question whether extraction of melt out of the plume beneath a slowly spreading ridge and deposition of extracted basalt volumes at the surface produces a dynamic feedback mechanism on mantle melting. To study this question we solve the convection equations for a ridge centred plume with non-Newtonian rheology including melting, melt extraction associated with deposition of cold crust at the surface of the model, and using a simplified approach for compaction. The assumption of cold crust is justified if the thickness of each deposited basaltic layer is less than roughly 1 km. Depending on the buoyancy flux of the plume, crustal thicknesses between 10 and 40 km are modelled, showing characteristic dipping structures resembling the rift-ward dipping basaltic layers of East- and Western Iceland. Comparing the resulting crustal thickness and magma generation rate with models in which the dynamic effect of crust deposition has been suppressed indicates, that melt generation beneath a slowly spreading ridge is considerably damped by the dynamic feedback mechanism if the plume buoyancy flux exceeds 400 to 600 kg/s. Based on the observed crustal thickness of Iceland our models predict a plume buoyancy flux of 1140 kg/s.In the second part we study the accretion of the Icelandic crust by a thermo-mechanical model in more detail based on the Navier–Stokes-, the heat transport and the mass conservation equations including volumetric sources. Hot (1200 °C) molten crustal material is injected into the newly forming crust with a constant rate at different crustal source regions: a) deep, widespread emplacement of dykes and sills including crustal underplating, b) magma chambers at shallow to mid-crustal level, and c) surface extrusions and intrusions in fissure swarms at shallow depth connected to volcanic centres. We identify the material from the different source regions by a marker approach. Varying the relative dominance of these source regions, characteristic crustal structures evolve, showing shallow dipping upper crustal layers with dip angles between 10 and 15°. The thermal structure of the crust varies between cold crust (shallow-source region dominating) and hot crust (deep-source region dominating). We use observations of maximum depth of seismicity to constrain the depth of the 650 °C isotherm and seismological inferences on the lower crust to constrain temperatures in that region. The best agreement with our models is achieved for crust formation dominated by deep dykes and underplating with a considerable influence of magma chamber accretion.  相似文献   

13.
The magnetic anomaly over a two-dimensional thin horizontal plate is similar to the first horizontal derivative of the magnetic anomaly over a thick dipping dike of infinite depth extent but with a different direction of magnetization. Hence, the magnetic anomalies of thin plates may be integrated along the profile and the pseudomagnetic potential anomaly thus obtained may be interpreted using any standard method of interpreting dike anomalies. Expressions for the Fourier amplitude and phase spectra of the magnetic anomaly over a thin plate are also derived and procedures to evaluate the parameters of the plate from the spectra are formulated.  相似文献   

14.
We use a multidisciplinary approach to gather preliminary evidence for a Quaternary east‐dipping extensional detachment in Central Italy. This structure crops out in the Sabini‐Eastern Simbruini (SES) and would be hidden at mid‐crustal depths beneath the L'Aquila 2009 (Mw6.3) epicentral area. The SES geometry is reconstructed through geological mapping, structural analysis and seismic line interpretation. The geometry of the mid‐crustal segment, referred to as the Ocre Segment (OS), is interpreted through seismological analyses of the largest aftershock (Mw5.4) of the L'Aquila 2009 sequence. The kinematic compatibility between the SES and the OS under a common SW–NE tensional field is tested through stress inversion of both geological and seismological data. The reliability of OS activation is tested through slip tendency analysis. Like other Italian cases, the SES and the OS are preliminarily interpreted as expressions at different depths of the same unknown east‐dipping extensional detachment, characterized by a ramp–flat–ramp geometry.  相似文献   

15.
康普水利枢纽工程联合进水口边坡岩体开挖后揭露3组结构面,它们形成不利组合对联合进水口的安全构成威胁。第1组结构面为倾向坡外的缓倾角断层(F1),构成边坡岩体的底滑面;第2组结构面为顺层断层(F218),构成边坡岩体的后缘切割面;第3组结构面为NE向陡侧角断层(F27),构成边坡岩体的倾切面。根据地质构造条件分析认为,联合进水口上部不稳定岩体的空间形态为,右侧以F27断层为界;左侧以河谷切割的监空面为界,后缘以F218断层为界。文章根据联合进水口开挖后揭露的缓倾角断层及其与水工建筑物的关系,从影响边坡岩体的稳定因素入手,采用岩质边坡极限平衡理论计算出联合进水口上覆不稳定岩体的安全系数,为边坡处理提供科学依据。  相似文献   

16.
Seismic velocity analysis is a crucial part of seismic data processing and interpretation which has been practiced using different methods. In contrast to time consuming and complicated numerical methods, artificial neural networks (ANNs) are found to be of potential applicability. ANN ability to establish a relationship between an input and output space is considered to be appropriate for mapping seismic velocity corresponding to travel times picked from seismograms. Accordingly a preliminary attempt is made to evaluate the applicability of ANNs to determine velocity and dips of dipping layered earth models corresponding to travel time data. The study is based on synthetic data generated using inverse modeling approach for three earth models. The models include a three-layer structure with same dips and same directions, a three-layer model with different dips and same directions, as well as a two-layer model with different dips and directions. An ANN structure is designed in three layers, namely, input, output, and hidden ones. The training and testing process of the ANN is successfully accomplished using the synthetic data. The evaluation of the applicability of the trained ANN to unknown data sets indicates that the ANN can satisfactorily compute velocity and dips corresponding to travel times. The error intervals between the desired and calculated velocity and dips are shown to be acceptably small in all cases. The applicability of the trained ANN in extrapolating is also evaluated using a number of data outside of the range already known to ANN. The results indicate that the trained ANN acceptably approximates the velocity and dips. Furthermore, the trained ANN is also evaluated in terms of capability of handling deficiency in input data where acceptable results were also achieved in velocity and dip calculations. Generally, this study shows that velocity analysis using ANNs can promisingly tackle the challenge of retrieving an initial velocity model from the travel time hyperbolas of seismic data.  相似文献   

17.
The combined influence of dip angle and adsorption heterogeneity on solute transport mechanisms in heterogeneous media can be understood by performing simulations of steady-state flow and transient transport in a heterogeneous aquifer with dipping anisotropy. Reactive and non-reactive contaminant transport in various types of heterogeneous aquifer is studied by simulations. The hydraulic conductivity (K) of the heterogeneous aquifer is generated by HYDRO_GEN with a Gaussian correlation spectrum. By considering the heterogeneity of the adsorption distribution coefficient (K d), a perfect negative correlation between lnK and lnK d is obtained by using the spherical grains model. The generated K and K d are used as input to groundwater flow and transport models to investigate the effects of dipping sedimentary heterogeneity on contaminant plume evolution. Simulation results showed that the magnitude of the dip angle strongly controls the plume evolution in the studied anisotropic and heterogeneous aquifer. The retarded average pore-water velocity (v/R) of the adsorption model significantly controls the horizontal spreading of the plume. The bottom plume is intensively retarded in the zones between the dipping lenses of lower hydraulic conductivity and the no-flow bottom boundary. The implications of these findings are very important for the management of contaminated heterogeneous aquifers.  相似文献   

18.
Focal-mechanism solutions of four earthquakes in the eastern Himalayas and northern Burma are determined using the first motion of compressional waves. Two possible solutions thus obtained for each event reveal steeply dipping fault with predominantly strike-slip motion. The stress directions inferred from the focal mechanism solutions are interpreted in the light of predictions of the plate tectonics theory, viz., the underthrusting of the Indian plate in the Burma region in an easterly direction.Dynamic parameters (seismic moment, apparent stress and average dislocations) are obtained using the corrected spectra of Love waves. The earthquakes are found to possess low seismic moment and apparent stress values. A comparison of these estimates with values for intraplate earthquakes is given. It is suggested that these earthquake might be a consequence of a nonhomogeneous rupture process.  相似文献   

19.
大巩山西蝈堆组蚌埠期褶皱可利用含白云质大理岩透镜体的蛇纹岩作为标志层来恢复,推测其为轴面倒向北的紧密同斜褶皱,S0近南北向,枢纽西倾,地层由东向西变新。  相似文献   

20.
Stress mapping is a numerical modelling technique used to determine the distribution and relative magnitude of stress during deformation in a mineralised terrane. It is based on the general principle that fluid flow in the Earth's crust is primarily related to pressure gradients. It is best applied to epigenetic hydrothermal mineral deposits, where fluid flow and fluid flux are enhanced in dilational sections of structures and in sites of enhanced rock permeability due to high fracture density. These are defined by sites of low minimum principal stress (σ3). Most stress mapping is carried out in two dimensions in plan view using geological maps. This is suitable for terranes with steeply dipping lithostratigraphy and structures in which the distribution of mineral deposits is largely controlled by fault structures portrayed on the maps. However, for terranes with gently dipping sequences and structures, and for situations where deposits are sited in and near the hinges of complex fold structures, stress mapping in cross‐section is preferable. The effectiveness of stress mapping is maximised if mineralisation was late in the evolutionary history of the host terrane, and hence the structural geometry of the terrane and contained deposits were essentially that expressed today. The orientation of syn‐mineralisation far‐field stresses must also be inferred. Two examples of orogenic gold deposits, which meet the above criteria, are used to illustrate the potential of stress mapping in cross‐section. Sunrise Dam, located in the Archaean Yilgarn Craton, is a lode‐gold deposit sited in a thrust‐fold belt. Stress mapping illustrates the heterogeneity of stress distribution in the complex structural geometry of the deposit, and predicts the preferential siting of ore zones around the intersections of more steeply dipping, linking thrusts and banded iron‐formation units, and below the controlling more gently dipping basal thrust, the Sunrise Shear. The Howley Anticline in the Pine Creek block hosts several Palaeoproterozoic gold deposits, sited in complex anticlinal structures in greywacke sequences. Stress mapping indicates that gold ores should develop in the hinge zones of symmetrical anticlines, in the hinge zones and more steeply dipping to overturned limbs of asymmetric anticlines, and in and around thrusts in both anticlines and parasitic synclines. The strong correlation between the predictions of the stress mapping, based on the distribution of low σ3, and the location of gold ores emphasises the potential of stress mapping in cross‐section, not only as an exploration tool for the discovery of additional resources or deposits, but also as a test of geological models. Knowledge of the potential siting of gold ores and their probable orientations also provides a guide to drilling strategies in both mine‐ and regional‐scale exploration.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号